Product Feature

1. Back pressure structure, compact type, cost-effective, installation time-saving.
2. Broad regulating range; low-pressure type is optional other than the standard type; stable output pressure; applicable to situations which have low expectation on output pressure but high expectation on performance and cost-effectiveness.
3. Single unit installation; easy to mount.

Specification

Ordering Code

Inner Structure and Material

 Pressure and Feature Of Flow

Dimensions

Note: Bracket and pressure gauge are optional.

Product Feature

1. Panel support can be chosen for the installation of the regulator with independent use in the pipeline.
2. The structure is delicate and compact, which is convenient for installation and application.
3. The performance of pressure adjustment is reliable and steady.
4. In addition to the standard type, a lower pressure type is optional (The highest adjustable pressure is 0.4 MPa).

Specification

Ordering Code

Flow Chart

Dimensions

Specification

Ordering Code

Dimensions

Accessories

User Interface Instruction

Specification

Ordering Code

Dimensions

Assembly Instruction

Product Feature

1. The structure is delicate and compact, which is convenient for installation and application.
2. The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interference.
3. In addition to the standard type, a lower pressure type is optional (The highest adjustable pressure is 0.4MPa).

Specification

Ordering Code
Inner Structure

Dimensions

Product Feature

1. The structure is delicate and compact.
2. The quantity of oil dripping can be directly observed through the transparent inspection sheet.
3. BL has high-strength plastic shields, which is more safe and reliable to use.
4. The pressure loss and the flow of mist start is low.

Specification

Ordering Code

Flow Chart

Inner Structure

 Dimensions

Product Feature

1. The structure is delicate and compact, which is convenient for installation and application.
2. The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interference.
3. The pressure loss is low and the efficiency of water separating is high;
4. In addition to the standard type, a lower pressure type is optional (The highest adjustable pressure is 0.4MPa).

Specification

Ordering Code

Inner Structure

Pressure and Feature of Flow

Dimensions

Ordering Code

Inner Structure

Product Feature

AF series

1. The structure is delicate and compact.
2. The pressure loss is low and the efficiency of water separating is high;
3.The filter precision includes 5μm and  40μm (optional);

BF series

1. The pressure loss is low and the efficiency of water separating is high.
2. The bowl has high-strength plastic shields outside, which is safer and more reliable.
3.The filter precision includes 5μm and 40μm (optional).

Specification

Ordering code

Flow Chart

Inner Structure

Dimensions

Product Feature

1. The structure is delicate and compact, which is convenient for installation and application.
2. The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interference.
3. The pressure loss is low and the efficiency of water separating is high.
4. The quantity of oil dripping can be directly observed through a transparent check-dome.
5. In addition to the standard type, the lower pressure type is optional (The highest adjustable pressure is 0.4MPa).

Specification

Ordering Code

Inner Structure

Pressure and Feature of Flow

Selection of Drain Mode

Dimensions

Symbol

Product Feature

1. A circular square pressure gauge with a clip and magnifier saves installation space.
2. The pressed-in self-locking mechanism can prevent the set pressure’s abnormal movement caused by external interference.
3. A balanced design is adopted for the pressure adjustment mechanism.
4. Unique diversion structure spins the air flowing through to effectively separate the liquid from the air and reliably filter the solid grain.
5. The filtering grade includes 0.3µm and 0.01µm (optional).
6. Two drain types are available: semi-auto drain and automatic drain.
7. Three materials of bowls are available: PC, Nylon, and metal.
8. The bracket can be selected for installation.

Specifications

Ordering Code

Inner Structure

Dimensions

Product Feature

1. High pressure regulating accuracy and rapid response.
2. Good pressure and flow chart.
3. Easy installation, it can be installed independently by bracket or directly with existing filter combination components of module type.
4. In addition to high-pressure type, the type of medium pressure and lower pressure can be selected.ư

Specification

[Note 1 ] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

Symbol

Product Feature

1. Low-pressure drop, high oil mist remove efficiency up to 99% and large drain bowl.
2. 0.3μm and 0.01μm filtering grades are available.
3. Two drain types are available: manual and semi-auto drain, and automatic drain.
4. To meet the needs of different environments the bowl material has Poly Carbonate, nylon, and metal can be selected.
5. Monomeric products can select the bracket for installation, others can be used with F.R.L Combination.

Specification

Ordering Code

Inner Structure

Dimensions

Symbol

Features

1. It is a module design and can be used with G/GA series F.R.L. combination by bracket.
2. This valve can be used as a manual 3/2 way valve.
3. Visual indication marked EXH/SUP.
4. This valve meets the standard on installation conducted by the operator specified by OSHA (Occupational Safety & Health Administration). When the machinery is maintained and serviced, the purge valve (Safe on-off valve) for remaining pressure shall be used to eliminate the remaining pressure when the air source is cut off. Valve must be locked to prevent accidental operation by a third party during maintenance. This prevents accidental system pressurization & cylinder actuation which can result in injuries to the machine operator.

Specification

[Note1] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

 Dimensions

Product Feature

1. This reverse flow valve can be used with a GA series regulator but can not be ordered individually.
2. When it is used with a GA series regulator, one only needs to change the seal board in the back of the regulator for the reverse flow valve. It is convenient to install and won’t change the external dimension of regulator.

Applicable Products

 Ordering Code

When GA series regulator is assembled with the reverse flow valve, the valve can be ordered together with the standard product. What needs to do is to add “-K” to the end of the ordering code of the standard product. Please refer to relevant content for more detailed order method.

Inner Structure

 Working Principle

Normally, as the pressure of intake (IN) is higher than the set valve (pressure of outlet), the reverse flow valve closed; if the pressure of intake (IN) is cut off and starts exhaust, reverse flow valve opens. The pressure of diaphragm chamber is exhausted from IN orifice. At this moment, the pressure of diaphragm chamber decreases and the diaphragm is pressed down by the force from adjusting spring to open valve. The pressure from outlet is exhausted from IN port.

Example of Resemble the reflux valve

Product Feature

1. It is installed between the GA series regulator (or filter & regulator) and G series Lubricator. The air flow is divided by the device one enters the Lubricator to supply oil for lubrication and the other (the second way) directly enters the equipment.
2. Several kinds of brackets can be selected to connect the regulator and lubricator. Optional brackets are type T, type L, and type U.

Specification

[Note1] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

Dimension

 How To Use The Bracket

Symbol

Product Feature

A soft start-up valve is used to input compressed air into the pneumatic system slowly and has the effect of safety and protection. Air intake is connected with the input P of the Soft start-up valve. If the coil is energized, the 3/2 way valve opens. At this time, a little air comes to output A through the throttle valve, which increases the pressure of the system gradually; when the output pressure is equal to half of the input pressure, the Soft start-up valve completely opens and the flow at this time reaches the highest value of itself. When the coil is de-energized, air intake P closes, the air returns to the R orifice through the reflux valve and is quickly exhausted. The pressure of the system falls to zero, which protects the whole system.

Specification

[Note1] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

Dimensions

Attention

Manually adjust the “+” and “-” throttle screw at the bottom of the soft start-up valve as per the requirement of start speed. It shall go slowly, otherwise sudden acting of the product or system shall be caused with a heavy impact.

Product Feature

1. The GT series is the shorter PC bowl version of GA200 series. Besides the features of GA200, the GT series also has the below features.
2. The drain bowl and oil bowl are shorter than GA200, which is suitable for restricted space installation.
3. No Auto drain available. The drain type is semi-auto drain + the manual drain.

Ordering Code

Dimensions

Symbol

Product Feature

1. The structure of oil dripping adopts gap seal type, which makes the adjustment of oil supply more reliable.
2. Oil feed ring can only make one full turn. The quantity of oil supply basically takes on linear distribution. The quantity of oil supply can be generally calculated according to the position of graduation ring.
3. Special drip nozzle structure will produce negative pressure in oil dripping outlet and the mist flow is minimal.
4. Three materials of bowl are available: PC, Nylon, and metal.
5. Filling of oil while the lubricator is under pressure is made possible, and the oil bowl is large.
6. The bracket can be selected for installation.

Specification

[Note1] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

Dimensions

Symbol

Specification

[Note1] PT thread, G thread and NPT thread are available.

Ordering Code

Dimensions

Inner Structure

Symbol

Product Feature

• Circular square pressure gauge which with clip and magnifier is used to save installation space.
• The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.
• Balanced design is adopted for the pressure adjustment mechanism.
• In addition to panel installation, the bracket is optional for installation.

Specification

[Note1] PT thread, G thread, and NPT thread are available.

Ordering Code

Inner Structure

Dimensions

Symbol

Specification

[Note 1] PT thread, G thread and NPT thread are available.

Ordering Code

Dimensions

Inner Structure

Symbol

Features

• A unique diversion structure spins the air flowing through to effectively separate the liquid from the air and reliably filter the solid grain.
• It has a low-pressure loss, high separation efficiency, and a large drain bowl capacity.
• Filtering grade includes 5µm and 40µm (Optional).
• Three drain types are available: manual, semi-auto, and automatic.
• Two drain types are available: semi-auto drain and automatic drain.
• Three materials of bowls are available: PC, Nylon, and metal.
• The bracket can be selected for installation.

Specification

Ordering Code

Specification

[Note 1] PT thread, G thread and NPT thread are available.

 Ordering Code

Dimensions

Inner Structures

Symbol

Product Feature

1. Circular square pressure gauge which with clip and magnifier is used to save installation space.
2. The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.
3. Balanced design is adopted for the pressure adjustment mechanism.
4. Unique diversion structure spins the air flowing through to effectively separate the liquid from the air and reliably filter the solid grain.
5. The filtering grade includes 5µm and 40µm (optional).
6. Two drain types are available: semi-auto drain and automatic drain.
7. Three material of bowl are available: PC, Nylon and metal.
8. The bracket can be selected for installation.

Specification

Ordering Code

Inner Structure

 Dimensions

Symbol

Specification

Ordering Code

Dimensions

Inner Structure

Symbol

Product Feature

1. Quick and reliable mounting clamps make it convenient to install and use.
2. The performance of pressure adjustment is reliable with high precision.
3. The efficiency of eliminating moisture and solid grain is high.
4. Two drain types are available: manual drain+semi-auto drain and automatic drain.
5. Three bowl materials are available: PC, Metal, and Nylon.

Specification

[Notel ] PT thread, G thread and NPT thread are available.

Ordering Code

Inner Structure

Dimensions

Symbol

Resized Table Example

Ordering Code

Dimensions

Inner Structures

Product Feature

1. Quick and reliable mounting clamps make it convenient to install and use.
2. The performance of pressure adjustment is reliable with high precision.
3. The efficiency of eliminating moisture and solid grain is high.
4. Two drain types are available: manual drain + semi-auto drain and automatic drain.
5. Three bowl materials are available: PC, Metal, and Nylon.

Symbol

Specification

Structure

 Dimensions

Symbol

Specification

Ordering Code

Dimensions

Inner Structure