Attaches to the vise (vice) mouthpiece with one touch to prevent tightening scratches on the workpiece.

Features

• Securely holds the workpiece without damaging the surface
• One-touch attaching/detaching to the vise with a magnet
• Replaceable pad
• Frame: L-shaped aluminum angle
• Fixed part: magnet rubber
• Pad: SBR firing Sheet (t=2mm)
• Size: The following 4 types are available. Please select according to the width of the vise mouthpiece.
  　・150mm x 20mm x 20mm
  　・125mm x 20mm x 20mm
  　・100mm x 20mm x 20mm
  　・75mm x 20mm x 20mm

Usage example

Suitable for preventing scratches and deformation on delicate materials such as plastic, wood, and glass, as well as workpieces such as round bars where clamping force is concentrated.

A side view of the device attached to a vise.

Replacement Pad

We offer a single pad for when the pad deteriorates or is damaged.

Features

• Pad: SBR foam sheet (t=2mm)
• With double-sided tape
• Size: The following 4 types are available.
  　・For 150mm
  　・For 125mm
  　・For 100mm
  　・For 75mm

[Packing form]
10 sheets/bag

The fluorine ion meter is a measurement device developed and commercialized by the Ministry of Economy, Trade and Industry’s “Regional Revitalization Consortium Research and Development Project” by utilizing the seeds of the National Institute of Advanced Industrial Science and Technology .

Features

• Measurement of one sample is finished in only 3 minutes.
• Eliminates the need for distillation/concentration in environmental water/wastewater measurements.
• Measurement of 0.1ppm fluoride ion concentration is possible with a dedicated reagent kit.
• There is little interference from interfering ions such as chloride ions (Cl-), and the reliability of measured values ​​is higher than that of the ion electrode method.
• Simply put the test water into the measuring bottle and put the reaction reagent (tablet), then the fluorine ion meter F-10A automatically displays the measurement result.

Fluorescence quenching reaction due to ligand exchange reaction between zirconium EDTA complex + flavonol sulfonic acid and fluoride ion is measured.

Features

• Uses cast-type urethane elastomer for excellent abrasion resistance.
• It has a conductivity of 10 ⁸ Ω and discharges static electricity not only in the surface direction but also in the volume direction, so the processing direction can be freely set without being restricted by the direction.
• Two colors are available: calm green and natural.

[Application example]

Spring washers, conductive mats, springs, etc. Can be freely processed, supporting a wide range of applications.

Round bar	outer diameter	length	input number	Hardness (HS)
	φ10	500L	Ten	Sheet round bar common 90°
	φ20	500L	Ten
	φ30	500L	Ten
	φ40	500L	5
	φ50	500L	5
sheet	Thickness	Width Length	input number
	1mm	1,000×2,000 (mm)	1 sheet/roll
	2mm	1,000×2,000 (mm)	1 sheet/roll
	5mm	500×500 (mm)	1 sheet
	10mm	500×500 (mm)	1 sheet

Since there is no scattering of paper dust or ink particles, it can be used in high-level clean rooms and underwater.

Features

• Since ink is not used, the indoor environment is prevented from being polluted by ink. (Sodium-free)
• Paper dust is not generated by lamination pack.
• Static electricity is suppressed due to the inner surface dielectric treatment.
• Characters will emerge in 1 to 2 seconds after writing. (Written characters cannot be erased.)
• Does not bleed even when wet. Can be used underwater.
• Only one side can be used.

Specifications

■Size: 155mm x 115mm (Writing surface: 147mm x 105mm)
■Thickness: Approx. 100μm

Usage example

Pen dedicated to Fantapapier

Please use a dedicated pen for Fantapapier.

■Size φ8×130
■Weight about 150g
■Material Stainless steel

Fantapapier dedicated binder

Please use it to fix Fantapapier.

• Size 228×166mm
• Weight About 160g
• Conductivity Surface resistance value 10^6～10^8Ω
• Material PP

Case for fantapapier

Please use it to store Fantapapier.

• Size 221×141×37mm
• Weight About 160g
• Material PS (non-static treatment)

For storing and transporting thin objects such as semiconductor chips and wafers.

*Parts keeper 100P may change color.

Protects micro parts from scattering and static electricity damage, and transports and stores them safely.

feature

• By applying adhesive urethane gel to the case inner bottom. hold parts. (Adhesive material is not used.)
• The  urethane gel is conductive (surface resistance value　10 ⁸ Ω), and the case uses non-static ABS to prevent electrostatic breakdown of stored items and dust adhesion. It has a preventive effect.
• Silicone is not used in the material, so there is no adverse effect on metal parts due to siloxane.
• Since it is a non-migratory urethane gel, there is no glue transfer or glue residue.

Characteristics

• Dust, scratches, burrs, and irregularities that are normally invisible are clearly visible.
• It is white light brightly by HID (High Intensity Discharge Lamp) adoption for car.
• Lamp power consumption 35W (brightness more than twice as bright as 100W halogen lamp)
• Plastic optical fiber adopted (light with strong directivity and low heat dissipation)

Irradiation

You can clearly see the dust on the glass plate and the unevenness of the blue sheet, which are difficult to see with fluorescent lights.

Specification

You can stick it anywhere you can use a magnet, such as your own locker or drawer at your company. A cute character will protect you from static electricity with a single touch.

• Item number: 003
• Color – Green
• Dimensions: 7×6.5 (cm)

A cute fairy series.
However, it is very reliable because it prevents static electricity.

One touch before opening the locker!
This alone will release you from static electricity.
Moreover, cute characters heal you and give you energy.

Features

“Piricut” is a tool to prevent shock caused by static electricity in the season when the air is dry. Although it is just a small piece of rubber (rubber piece), it has an electrical volume resistance value of 10 to 10 cm (JIS K6911), which is just between a conductor and an insulator.

When you hold “Piricut” in your hand and touch the tip of the rubber piece to metal, the static electricity that has been charged on your body is quickly grounded, and that “bachi!”

Therefore, when you drive a car or go to a department store or hotel, be sure to carry “Piricut” with you. Please touch your hands after removing the static electricity that has been charged.

After touching it once, you can operate it with confidence.

Features

• Since it does not contain fibers, no fibers come off.
• Its ultra-fine continuous pores (10 to 15 μm) provide excellent water and air absorption.
• The product comes in two sponge hardness options: soft and hard.
• Users can choose from three different sponge shapes: pen-shaped, diagonal-cut, and thin.
• The soft type effectively removes dirt without damaging surfaces during both wet and dry cleaning.
• Its strong solvent resistance allows users to soak it in solvents (such as acetone and ethyl alcohol) to remove dirt.
• Replacing only the sponge part reduces waste compared to cotton swabs.
• The manufacturing process and materials do not involve silicone, making it silicone-free.
• Users can apply it for various purposes, such as removing oil films with alcohol, wiping and cleaning with chemicals and solvents, applying adhesives, removing pools of mold release agents, applying rust inhibitors for mold storage, and painting.

Specifications

Dedicated shaft

Features

• It is a special transfer sheet common to Peta series.
• It is an adhesive rubber sheet to transfer the foreign matter collected in the Peta series.
• After attaching foreign matter, it can be used repeatedly by washing with pure water and drying.
  (In that respect, unlike disposable transfer sheets, it significantly reduces industrial waste.)
• Since no adhesive is used, there is no glue transfer or residue.
• Because it has conductivity (10^8Ωcm), it prevents separation electrification during transfer.
• Exclusive case which is convenient for storage includes

Example of Use

Workpiece before removal of foreign matter

Foreign matter is removed with the peta series (peta roller)

After applying the roller, as you can see, the foreign matter on the workpiece is removed.

Roll the foreign matter on the roller onto the transfer sheet to transfer the foreign matter. (The left side of the screen looks like a foreign object has been transferred. The right side is unused.)

*1 The above figure uses a Peta Roller, but other Peta Series products can be used in the same way.
*2 The transfer sheet with foreign matter attached can be washed away with pure water and reused repeatedly after drying.

Specifications

Features

• Disposable foreign matter removal tool
• Since it is an elastomer system, it minimizes glue transfer and glue residue on the workpiece.
• As it is disposable (disposable), work efficiency is good.
• We transfer foreign matter which we collected to exclusive transfer and can use repeatedly.

Specifications

Features

• The shape of the spatula is suitable for removing foreign objects on steps and corners that rollers cannot reach.
• Four types of spatula widths are available: 12mm, 24mm, 48mm, and 96mm.
• It is made of conductive urethane rubber (10^8Ωcm), which prevents static electricity when removing dust and reattachment of dust.
• Because adhesive is not used in the material, there is no glue transfer and you can use it with confidence.
  　 (Residual ion concentration, permissible limit of detection cations: 0.05ppm anions: 0.01ppm or less)
• The collected foreign matter can be transferred to a dedicated transfer sheet and used repeatedly.

Specification

Product name	Peta spatula 12mm width	Peta spatula 24mm width
model number	PE-12	PE-24
Material	Grip: Conductive hard urethane rubber Tip: Conductive adhesive urethane rubber
Dimensions (mm) (W×L×D)	12×70×6*	24×70×6*
type of packing	4 pieces/bag	2 pieces/bag
Product image

* Spatula angle about 38 degrees

Product name	Peta spatula 48mm width	Peta spatula 96mm width
model number	PE-48	PE-96
Material	Grip: Conductive hard urethane rubber Tip: Conductive adhesive urethane rubber
Dimensions (mm) (W×L×D)	48×70×6*	96×70×6*
type of packing	1 piece/bag	1 piece/bag
Product image

* Spatula angle about 38 degrees

Features

• Suitable for removing foreign matter adhering to small irregularities and gaps that are difficult to reach, and sampling for analysis.
• You can choose two types of tip diameter of about 0.5mm and 0.3mm.
• We attach to body for exclusive use of micro peta stick and use.
• Both the micro peta stick and the dedicated body are conductive.
• It is made of conductive urethane rubber (10^8Ω), which prevents static electricity when removing dust and reattachment of dust.
• Because adhesive is not used in the material, there is no glue transfer and you can use it with confidence.
  (Residual ion concentration, permissible limit of detection cations: 0.05ppm anions: 0.01ppm or less)
• The collected foreign matter can be transferred to a special transfer sheet and used repeatedly.

Specifications

●Tip diameter 0.5mm type

Product name	Conductive 05 micro peta stick 96	48 conductive 05 micro peta sticks	24 conductive 05 micro peta sticks
model number	MP0596-AS	MP0548-AS	MP0524-AS
Material	Tip rubber: Conductive adhesive urethane rubber / Body: Conductive PP
size	Total length: about 50mm (rubber tip φ0.5mm x 3mm)
quantity	96	48	twenty four
type of packing	96 pieces/case (clean pack) * 1 dedicated body included	48 pieces/case (clean pack) * 1 dedicated body included	24/case (clean pack) * 1 dedicated body included

●Tip diameter 0.3mm type　　　　　　　　

Product name	Conductive 03 micro peta stick 96	48 conductive 03 micro peta sticks	24 conductive 03 micro peta sticks
model number	MP0396-AS	MP0348-AS	MP0324-AS
Material	Tip rubber: Conductive adhesive urethane rubber / Body: Conductive PP
size	Total length: about 32mm (rubber tip φ0.3mm x 3mm)
quantity	96	48	twenty four
type of packing	96 pieces/case (clean pack) * 1 dedicated body included	48 pieces/case (clean pack) * 1 dedicated body included	24/case (clean pack) * 1 dedicated body included

● Dedicated body

We have prepared for customers who want to try which type is suitable first.

Characteristics

• Suitable for removing spot-like foreign matter.
• It is made of conductive urethane rubber (10^8Ω), which prevents static electricity when removing dust and reattachment of dust.
• Because adhesive is not used in the material, there is no glue transfer and you can use it with confidence.
  (Residual ion concentration, permissible detection limit Cation: 0.05ppm Anion: 0.01ppm or less)
• Three types of pen tip rubber can be selected according to the application.
• We attach pen point rubber to Petapen body and use.
• Both pen tip rubber and petapen body are conductive.
• The collected foreign matter is transferred to a dedicated transfer sheet and can be used repeatedly.

Specifications

Petapen Rubber

Peta pen body

If the worker is electrified and no grounding measures are taken, if a conductive roller is used, although the static electricity is weak, it may flow to the work and adversely affect it. In addition, when special chemicals are used in the work and non-conductive gloves are unavoidably used, it may not be possible to remove the triboelectricity generated by the roller. The Petalor “ASE Series” solves these problems.

Features

• Conductive urethane rubber on the roller, a stainless steel arm, and a grounding circuit inside the grip are provided, and the frictional electricity generated from the roller is completely eliminated by the grounding wire attached to the bottom of the grip. (Effective when you cannot work with conductive gloves or bare hands.)
• Insulating plastic is used for the grip to electrically insulate the operator from the roller.
• Because we do not use adhesive material at all, there is no paste transfer, adhesive residue.
• Because of low elution (residual ion concentration, detection limit tolerance cation: 0.05ppm anion: 0.01ppm or less), you can use it with confidence.
• We do not use silicon for manufacturing process and materials at all. (Silicon-free)
• The collected foreign matter can be transferred to a dedicated transfer sheet and used repeatedly.
• Exchange only for roller is possible.

Specifications

Unit: mm

*Excludes ground wire and ground wire plug

Features

• Conductive urethane rubber is used for the rollers, and stainless steel is used for the grips. (Roller volume resistivity: 10^8Ωcm)
• Static electricity caused by friction during use is released through the operator’s conductive gloves and grounding band.
• Because we do not use adhesive material at all, there is no paste transfer, adhesive residue.
• Because of low elution (residual ion concentration, detection limit tolerance cation: 0.05ppm anion: 0.01ppm or less), you can use it with confidence.
• We do not use silicon for manufacturing process and materials at all. (Silicon-free)
• The collected foreign matter can be transferred to a dedicated transfer sheet and used repeatedly.
• Exchange only for roller is possible.

Specifications

Unit: mm

Features

• It is non-conductive.
• Because we do not use adhesive material at all, there is no paste transfer, adhesive residue.
• Because of low elution (residual ion concentration, detection limit tolerance cation: 0.05ppm anion: 0.01ppm or less), you can use it with confidence.
• We do not use silicon for manufacturing process and materials at all. (Silicon-free)
• The collected foreign matter can be transferred to a dedicated transfer sheet and used repeatedly.
• Exchange only for roller is possible.

Specifications

Unit: mm