Manufacturer: Alinco, Japan

Model: PXGE

ALINCO in Japan manufactured in China. This is good reputation and used for many situations. Our customer used it for painting works.

Features

• Good adhesion to many adherends including PVC steel plates
• High durability
• Paintable
• medium modulus
• anti-mildew

Usage

• Various interior and exterior joints

Properties

product name	POS Seal
Main ingredient	Modified silicone sealant
exterior	each color paste
Density (g/ cm3 )	1.39
touch dry time	1 to 2 hours (23°C)
Standard coating amount	Joint width 5 mm x depth 5 mm → about 12 m/cartridge Joint width 10 mm x depth 10 mm → about 3 m/cartridge

Performance based on JIS A 5758

item			result
Classification by JIS A 5758			F-20HM-8020(MS-1)
Slump (mm)	vertical	5°C	0
		50°C	0
	beside	5°C	0
		50°C	0
Elastic recovery (%)			62
adherend			aluminum
Tensile properties (N/ mm2 )		23°C	0.5
		-20℃	0.7
Adhesion under constant elongation		23°C	No abnormality
		-20℃	No abnormality
Adhesion after compression heating/tension cooling			No abnormality
Adhesion after exposure to artificial light			–
Adhesion under constant elongation after water immersion			No abnormality
Volume loss (%)			3.5

*Tests for each item are conducted in accordance with JIS A 1439 (2016).
*Test results are representative values.

Tensile adhesion

adherend	Processing conditions	temperature	50% tensile stress (N/ mm2 )	Maximum tensile stress (N/ mm2 )	Elongation at maximum load (%)
aluminum x aluminum	After curing	23°C	0.37	0.88	240
		-10℃	0.39	1.06	250
	After heating	23°C	0.39	0.95	210
		-10℃	0.41	1.08	240
	After flooding	23°C	0.27	0.83	490
Mortar x Mortar	After curing	23°C	0.37	0.86	230
		-10℃	0.39	1.00	250
	After heating	23°C	0.39	.092	200
		-10℃	0.41	1.06	220
	After flooding	23°C	0.27	0.78	450