Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of cast aluminum (12CC) and ductile cast iron (12C and 14C), with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness. ※ERC12CC: only blade case is made of stainless steel(SUS).

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used (except for 12 CC). Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment (except for 12 CB).

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment (except for 12 CC). The ERC12CC is so structured as to allow the blade case side to open. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC12CC means that it accommodates 12-inch parts; ERC16DCB means that it accommodates 16-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life (except for the 12CC).

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand (except for the 12CC).

This handle which has folding strucure can be a compact. And this is so convenient when transports.(Only ERC12CC)

Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of ductile cast iron, with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness.

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used. Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC14DC means that it accommodates 14-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life.

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand.

Designed based on the concept that when half semi-propelled, the cutter can be moved up and down, run, and stopped with a single operation handle. The stainless steel operation handle can simply be replaced with an up/down shaft and a travel shaft. When inserted backwards, the handle displays its performance as parking brakes. The machine can be operated in isolation. You can therefore enjoy a large operation radius and alleviate the load for moving up and down and traveling, thereby facilitating your work. With a large instruction sticker, the product works to minimize the incidence of operation errors.

When cutting depth determined, you have only to tilt the stopper lever in the fixing direction to fix depth.

The ERC16DSC and ERC18DSC come equipped with a cell starter (with batteries). In these models, therefore, you can start the engine with the starter key just as you start a car. For large engines, starting a recoil starter requires a force. The cell starter increases operability that much more.

Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of cast aluminum (12CC) and ductile cast iron (12C and 14C), with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness. ※ERC12CC: only blade case is made of stainless steel(SUS).

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used (except for 12 CC). Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment (except for 12 CB).

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment (except for 12 CC). The ERC12CC is so structured as to allow the blade case side to open. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC12CC means that it accommodates 12-inch parts; ERC16DCB means that it accommodates 16-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life (except for the 12CC).

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand (except for the 12CC).

This handle which has folding strucure can be a compact. And this is so convenient when transports.(Only ERC12CC)

Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of ductile cast iron, with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness.

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used. Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC14DC means that it accommodates 14-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life.

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand.

Designed based on the concept that when half semi-propelled, the cutter can be moved up and down, run, and stopped with a single operation handle. The stainless steel operation handle can simply be replaced with an up/down shaft and a travel shaft. When inserted backwards, the handle displays its performance as parking brakes. The machine can be operated in isolation. You can therefore enjoy a large operation radius and alleviate the load for moving up and down and traveling, thereby facilitating your work. With a large instruction sticker, the product works to minimize the incidence of operation errors.

When cutting depth determined, you have only to tilt the stopper lever in the fixing direction to fix depth.

The ERC16DSC and ERC18DSC come equipped with a cell starter (with batteries). In these models, therefore, you can start the engine with the starter key just as you start a car. For large engines, starting a recoil starter requires a force. The cell starter increases operability that much more.

Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of cast aluminum (12CC) and ductile cast iron (12C and 14C), with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness. ※ERC12CC: only blade case is made of stainless steel(SUS).

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used (except for 12 CC). Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment (except for 12 CB).

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment (except for 12 CC). The ERC12CC is so structured as to allow the blade case side to open. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC12CC means that it accommodates 12-inch parts; ERC16DCB means that it accommodates 16-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life (except for the 12CC).

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand (except for the 12CC).

This handle which has folding strucure can be a compact. And this is so convenient when transports.(Only ERC12CC)

Exen concrete cutters, safely designed according to the requirements of the safety standards for JIS-compliant road works machinery, achieve high work safety.

A body-supporting component and therefore the most important, the chassis is made of ductile cast iron, with highly precise machining, high rigidity, and low center of gravity, thereby achieving stable operability and cutting performance.

It is equipped with environmentally friendly exhaust gas self-regulating engine and is drawing out stable cutting performance.

The blade case, belt cover, tank house, handle, and other main components are made of rust-resistant stainless steel (SUS) in pursuit of durability and rustproofness.

These products come equipped with a large-capacity polypropylene tank of the largest order of its class, robust and durable, which cannot gather rust and allows disconnection without keeping a hose attached from outside at all times. The punch plate can serve as a filter for use in case accumulated water is used. Also available is a hose insertion port, which facilitates water supply (for all models). Water residues can be easily disposed of through a drain valve, which is installed as standard equipment

All models come equipped with a low-edge cog type 3VX belt. The cogged belt reduces the incidence of belt breaks and revolution losses. These cutters are also designed with higher safety by a safe structure that prevents your hand from going behind the belt cover.

The blade case is so structured as to be installed in a single touch, which facilitates blade attachment. Note: Numbers indicated as part of each concrete cutter model name are expressed in inches for the largest diamond blades. (Example: ERC14DC means that it accommodates 14-inch parts) Exen concrete cutters are standardized at a diamond blade shaft hole diameter of 27 mm for all models.

The blade holder is of the centrifugally dispersion type that allows cooling water to reach all corners of the blade by centrifugal force. This increases cooling effect, along with cutting performance and blade life.

Available as standard equipment is a throttle lever with which to adjust engine revolution at hand.

Designed based on the concept that when half semi-propelled, the cutter can be moved up and down, run, and stopped with a single operation handle. The stainless steel operation handle can simply be replaced with an up/down shaft and a travel shaft. When inserted backwards, the handle displays its performance as parking brakes. The machine can be operated in isolation. You can therefore enjoy a large operation radius and alleviate the load for moving up and down and traveling, thereby facilitating your work. With a large instruction sticker, the product works to minimize the incidence of operation errors.

When cutting depth determined, you have only to tilt the stopper lever in the fixing direction to fix depth.

The ERC16DSC and ERC18DSC come equipped with a cell starter (with batteries). In these models, therefore, you can start the engine with the starter key just as you start a car. For large engines, starting a recoil starter requires a force. The cell starter increases operability that much more.