Model: PC-S

The packing cutter is a tool that makes packing easy. It is a simple way to use it by drawing a circle with a compass around the center holder and gradually cutting with his knife holder.

Specification

1 set includes:

● Body (with center pin / cutter)
● 1 cutter
● 1 center pin
● 2 types of L wrench / 1 each
● 1 whetstone for cutter
● Durable and lightweight aluminum case

Model: S10 / PT-B0; S11 / PT-B1; S12 / PT-B2; S13 / PT-B3

Specification

S10 Hexagon: diameter 5 mm x length 35 mm
S11 Hexagon: diameter 7 mm x length 40 mm
S12 Hexagon: diameter 9.5 mm x length 50 mm
S13 Hexagon: diameter 14 mm x length 75 mm

Model: S0 / PT-A0; S1 / PT-A1; S2 / PT-A2; S3 / PT-A3

Specification

S0 Shaft: diameter 5 mm x length 170 mm

S1 Shaft: diameter 6 mm x length 170 mm

S2 Shaft: diameter 7 mm x length 220 mm

S3 Shaft: diameter 10 mm x length 300 mm

Model: PT-S

The packing tool makes it easy to replace the packing. It can be widely used for pulling out and inserting his packing inserted in the ground part of hydraulic cylinders and various pumps, and pulling out lantern rings.

Specification

1 set includes:

● Flexible shafts S1 and S2 / 2 each
● Corkscrew S11 and S12 / 3 each
● 2 types of lantern pits / 2 each
● 3 types of dampers / 1 each
● 1 solid hook
● 1 ring hook
● 1 wrench
● Durable and lightweight aluminum case

Model: FK-HP800EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 800 kg for FK-HP800EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 20 mm
• Pressurizing capacity: 800 kg
• Open height: 70-190 mm
• Table area: 170 mm x 320 mm
• Depth from the center: 100 mm
• Overall height: 320 mm
• Installation area: 240 mm x 400 mm
• Total weight: 16 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-HP500EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 500 kg for FK-HP500EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 15 mm
• Pressurizing capacity: 500 kg
• Open height: 70-110 mm
• Table area: 110 mm x 250 mm
• Depth from the center: 70 mm
• Overall height: 290 mm
• Installation area: 140 mm x 320 mm
• Total weight: 7.2 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-HP200EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 200 kg for FK-HP200EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 11 mm
• Pressurizing capacity: 250 kg
• Open height: 55-90 mm
• Table area: 70 mm x 170 mm
• Depth from the center: 50 mm
• Overall height: 220 mm
• Installation area: 110 mm x 210 mm
• Total weight: 3.3 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-C13; FK-C24; FK-C27; FK-C33; FK-C40

Specification

● 5 mm to 13 mm / FK-C05 to FK-C13 …………… Standard price 1,700 yen

● 14 mm to 24 mm / FK-C14 to FK-C24 ………….. Standard price 1,900 yen

● 25 mm to 27 mm / FK-C25 to FK-C27 ………….. Standard price 2,200 yen

● 28mm-33mm / FK-C28-FK-C33 ………….. Standard price 2,600 yen

● 34 mm-40 mm / FK-C34-FK-C40 ………….. Standard price 2,800 yen

● Material S45C / quenching hardness HRC57

Model: FK-P17-H

Specification

Install the spare blade punch. The pin at the tip is pulled by the force of the internal spring
Push out what you pulled out.
● Total length: 150 mm
● Material S45C / No quenching
● Plating