Features

• This is a flame-retardant chloroprene rubber (CR) that meets the UL flame-retardant standard “UL94 V-0.”

Features

• This weather- resistant nitrile rubber (NBR) sheet has the properties of both CR and NBR, and is reinforced with cotton fabric (flat weave), making it suitable for applications where strength is desired.

Features

• Contains over 20wt% recycled rubber!
• Because it uses devulcanized recycled rubber instead of chipped crushed rubber, it ensures performance close to that of general-purpose rubber sheets.
• The recycled rubber is made using only scraps generated during the manufacturing process within the manufacturer’s factory.

Product specifications

• Material: EPDM
• Hardness: 70 (Type A)
• Tensile strength: 8.0 MPa
• Elongation at break: 390%
• Heat aging test (100°C x 72 hours)
  Hardness change: 4
  Tensile strength change rate: 26%
  Elongation change at break: -38%
• Compression set test (100°C x 24 hours)
  Distortion: 67%
• *These are typical values, not standard values.

Features

• It has good grip and can be used as an anti-slip surface.
• It has better non-stick properties than general rubber sheets.
• Produced using the same calendaring method as rubberized fabric, it is characterized by thin (thickness tolerance ±0.05), uniform, and stable long sheets.
• It is a general-purpose synthetic rubber that has excellent ozone resistance, weather resistance, and chemical resistance, as well as good heat and cold resistance.

Product specifications

• Material: Ethylene propylene rubber (EPDM/EPT)
• Hardness: 60 (Type A)
• Color: Black
• Thickness tolerance: ±0.05
• Tensile strength: 12.4 MPa
• Elongation: 480%
• Aging test (70°C x 70 hours)
  Tensile strength change rate: +3%
  Elongation change rate: -11%
  Hardness change: +4
• Ozone resistance test (50 pphm x 40°C x 20% elongation x 72 hours): Non-cracking

Size

• Minimum size
  Thickness: 0.2mm
  Width x Length: 1,000mm  x  1,000mm
• Maximum size
  Thickness: 0.3mm
  Width x Length: 1,000mm  x  50m

Features

• This is a general-purpose synthetic rubber that has excellent ozone resistance, weather resistance, and chemical resistance, as well as good heat and cold resistance.
• Sheets that are less than 0.5 mm thick and 1 meter wide are rare, and can also be used as sheets for processing thin products.
• The texture (grain) on both sides makes it non-slip.

Product specifications

• Material: Ethylene propylene rubber (EPDM/EPT)
• Hardness: 60 (Type A)
• Color: Black
• Tensile strength: 14.5MPa
• Elongation at break: 414%
• Tear strength: 392N/cm
• Heat aging test (100℃ x 72h)
  Hardness change: -4 (Type A)
  Tensile strength change rate: -2%
  Elongation change rate at break: -1%
• Compression set (100°C x 24h): 23.4%
• Applicable JIS standard: BCH6446
• *These are measured values ​​and not guaranteed values.
• *The specifications may be changed without notice for improvement purposes.

Size

• Minimum size
  Thickness: 0.2mm
  Width x Length: 1,000mm  x  10m
• Maximum size
  Thickness: 0.5mm
  Width x Length: 1,000mm  x  10m

Features

• Ethylene Propylene Rubber (EPT) Sheet <70> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation types.

Features

• “FH Sheet” is the name of Gomu Tsushin’s original standard rubber sheet.
• It is black and measures 250mm square.
• Choose from thicknesses of 1, 2, 3, or 5mm and hardnesses of 10, 20, 30, 40, or 50.
• A physical properties table can be provided, and the product is RoHS compliant.
• Excellent weather resistance, ozone resistance, heat resistance, and cold resistance.

Product specifications

• Material: Ethylene propylene rubber (EPDM)
• Hardness: 10, 20, 30, 40, 50 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 1mm
  Width x Length: 250mm  x  250mm
• Maximum size
  Thickness: 5mm
  Width x Length: 250mm  x  250mm

Features

• “Peroxide-crosslinked EPDM rubber (ethylene-propylene rubber)” is a non-sulfur-vulcanized rubber sheet that offers better heat resistance than sulfur-vulcanized EPDM.
• “FH Sheet” is the name of Gomu Tsutsu’s original standard rubber sheet.
• It is black and measures 200mm square.
• Choose from thicknesses of 0.2, 0.4, 0.6, or 0.8mm and hardnesses of 70 or 80.
• A physical properties sheet can be provided, and the product is RoHS compliant
• Excellent weather resistance, ozone resistance, heat resistance, and cold resistance

Product specifications

• Material: Peroxide cross-linked ethylene propylene rubber (EPDM)
• Hardness: 70/80 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 0.2mm
  Width x Length: 200mm  x  200mm
• Maximum size
  Thickness: 0.8mm
  Width x Length: 200mm  x  200mm

Features

• “Non-Body-Polyvinyl Chloride Nitrile Rubber (NBRPVC)” is a rubber sheet that offers superior weather resistance and abrasion resistance compared to standard nitrile rubber grades.
• “FH Sheet” is the name of Gomu Tsushin’s original standard rubber sheet.
• It is black and measures 250mm square.
• Choose from thicknesses of 1, 2, 3, or 5mm and hardnesses of 60, 70, 80, or 90.
• A physical properties sheet can be provided, and the product is RoHS compliant.

Size

• Minimum size
  Thickness: 1mm
  Width x Length: 250mm  x  250mm
• Maximum size
  Thickness: 5mm
  Width x Length: 250mm  x  250mm

Features

• “Non-Body-Polyvinyl Chloride Nitrile Rubber (NBRPVC)” is a rubber sheet that offers superior weather resistance and abrasion resistance compared to standard nitrile rubber grades.
• “FH Sheet” is the name of Gomu Tsushin’s original standard rubber sheet.
• It is an environmentally friendly, ultra-thin rubber sheet that is phthalate-free and RoHS2 compliant.
• It is black in color and measures 200mm square.
• Choose from thicknesses of 0.2, 0.4, 0.6, or 0.8mm and hardnesses of 60, 70, 80, or 90.
• A physical properties table can be provided.

Product specifications

• Material: Polyvinyl chloride nitrile rubber (NBRPVC)
• Hardness: 60, 70, 80, 90 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 0.2mm
  Width x Length: 200mm  x  200mm
• Maximum size
  Thickness: 0.8mm
  Width x Length: 200mm  x  200mm

Features

• Medium-high nitrile rubber is generally a nitrile rubber (NBR) sheet with an acrylonitrile content of 31-35%.
• “FH Sheet” is the name of Gomu Tsushin’s original standard rubber sheet.
• It is an environmentally friendly, ultra-thin rubber sheet that is phthalate-free and RoHS2 compliant.
• It is black and measures 200mm square.
• Choose from thicknesses of 0.2, 0.4, 0.6, or 0.8mm and hardnesses of 60, 70, or 90.
• A physical properties table can be provided.

Product specifications

• Material: Medium-high nitrile rubber
• Hardness: 60, 70, 90 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 0.2mm
  Width x Length: 200mm  x  200mm
• Maximum size
  Thickness: 0.8mm
  Width x Length: 200mm  x  200mm

Features

• Nitrile rubber (NBR) sheet <50> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000 mm.
• Suitable for strip shapes, square plates, and round plates.

Features

• Nitrile rubber (NBR) sheet <90> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation.

Features

• Nitrile rubber (NBR) is a synthetic rubber with excellent oil resistance.
• It is used in a wide range of products, including automotive parts, O-rings, and gloves.
• However, it is not suitable for outdoor use due to its poor weather resistance.
• This is a soft type.

Features

• This is a general-purpose synthetic rubber that has excellent ozone resistance, weather resistance, and chemical resistance, as well as good heat and cold resistance.
• Sheets that are less than 0.5 mm thick and 1 meter wide are rare, and can also be used as sheets for processing thin products.

Features

• A general-purpose synthetic rubber with a balanced combination of weather resistance and oil resistance.
• Sheets that are less than 0.5 mm thick and 1 meter wide are rare, and can also be used as sheets for processing thin products.
• Environmentally friendly: Non-phthalate

Features

• A general-purpose synthetic rubber with excellent mechanical strength and abrasion resistance.
• Sheets that are less than 0.5 mm thick and 1 meter wide are rare, and can also be used as sheets for processing thin products.

Features

• Recycled Rubber Sheet EB70Z with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation.

Features

• Contains over 20% recycled rubber by weight!
• Because it uses devulcanized recycled rubber instead of chipped crushed rubber, it ensures performance close to that of general-purpose rubber sheets.
• The recycled rubber is made using only scraps generated during the manufacturing process within the manufacturer’s factory.

Features

• High precision thickness tolerance of ±10%.
• This product is environmentally friendly and complies with green procurement standards, as it does not contain any environmentally hazardous substances.
• It has excellent low-pollution properties because it does not use vulcanizing agents.
• Although thin, it is highly strong and has excellent permanent elongation.
• The standard base material is polyester film, which is easy to handle and has excellent dimensional stability during processing.

Features

• It has excellent chemical resistance, oil resistance, and solvent resistance.
• It has excellent weather resistance and ozone resistance.
• Its heat aging resistance is superior to that of silicone rubber.

Features

• It has excellent oil and heat resistance.
• Has excellent ozone and chemical resistance.
• It is strong and abrasion resistant.
• In terms of overall performance, it has a wider range of resistance to fuel oils than NBR and fluororubber.

Features

• Nitrile rubber (NBR) is a synthetic rubber with excellent oil resistance.
• It is used in a wide range of products, including automotive parts, O-rings, and gloves.
• However, it is not suitable for outdoor use due to its poor weather resistance.

Features

• This weather- resistant nitrile rubber (NBR) sheet has the properties of both CR and NBR, and is reinforced with cotton fabric (flat weave), making it suitable for applications where strength is desired.

Features

• It is made using the same calendaring process as rubberized fabric, resulting in thin, uniform, and stable long sheets.
• The texture (grain) on both sides makes it suitable for use as an anti-slip surface.
• It is made from CR (chloroprene rubber), a general-purpose synthetic rubber with a balanced combination of weather resistance and oil resistance.
• Sheets under 0.5 mm thick and 1 meter wide are rare, making it suitable for use as a processing sheet for thin products.

Features

• Chloroprene rubber (CR) sheet <90> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose the perforation type from the basic patterns.

Features

• Chloroprene rubber (CR) sheet <65> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation types.

Features

• “Hydrogenated Nitrile Rubber (HNBR)” is a nitrile rubber sheet developed as an improved grade to compensate for the shortcomings of NBR.
• “FH Sheet” is the name of Gomu Tsutsu’s original standard rubber sheet.
• It is black and measures 250mm square.
• Choose from thicknesses of 1, 2, 3, or 5mm and hardnesses of 45, 65, or 87.
• A physical properties table can be provided, and the product is RoHS compliant.

Product specifications

• Material: Hydrogenated nitrile rubber
• Hardness: 45, 65, 87 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 1mm
  Width x Length: 250mm  x  250mm
• Maximum size
  Thickness: 5mm
  Width x Length: 250mm  x  250mm

Features

• “High nitrile” generally refers to a highly oil-resistant nitrile rubber (NBR) sheet with an acrylonitrile content of 36-42%.
• “FH sheet” is the name of Gomu Tsushin’s original standard rubber sheet.
• It is an environmentally friendly, ultra-thin rubber sheet that is phthalate-free and RoHS2 compliant.
• It is black in color and 200mm square in size.
• Choose from thicknesses of 0.4, 0.6, or 0.8mm and hardnesses of 70 or 80.
• A physical properties table can be provided.

Product specifications

• Material: High nitrile rubber
• Hardness: 70/80 (Type A)
• Color: Black

Size

• Minimum size
  Thickness: 0.4mm
  Width x Length: 200mm  x  200mm
• Maximum size
  Thickness: 0.8mm
  Width x Length: 200mm  x  200mm

Features

• Chloroprene rubber (CR) sheet <45> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and you can also choose from the basic patterns for perforation types.

Features

• It has excellent chemical resistance, oil resistance, and solvent resistance.
• It has excellent weather resistance and ozone resistance.
• Its heat aging resistance is superior to that of silicone rubber.

Features

• Ethylene Propylene Rubber (EPT) Sheet <70> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation types.

Features

• High precision thickness tolerance of ±10%.
• This product is environmentally friendly and complies with green procurement standards, as it does not contain any environmentally hazardous substances.
• It has excellent low-pollution properties because it does not use vulcanizing agents.
• Although thin, it is highly strong and has excellent permanent elongation.
• The standard base material is polyester film, which is easy to handle and has excellent dimensional stability during processing.

Product specifications

• Product number: EB81NNS
• Material: Ethylene propylene rubber (EPDM)
• Hardness: 78 (Type A)
• Ts: 13.5 MPa
• Eb: 180%
• Surface: Matte
• Color: Black
• Thickness: 100μm
• *The characteristic values ​​are measured values ​​of the rubber material and are not standard values.

Features

• Chloroprene rubber (CR) sheet <65> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation types.

Features

• A general-purpose synthetic rubber with a balanced combination of weather resistance and oil resistance.
• Sheets that are less than 0.5 mm thick and 1 meter wide are rare, and can also be used as sheets for processing thin products.
• Environmentally friendly: Non-phthalate

Features

• It has excellent chemical resistance, oil resistance, and solvent resistance.
• It has excellent weather resistance and ozone resistance.
• Its heat aging resistance is superior to that of silicone rubber.

Features

Features

• Chloroprene rubber (CR) sheet <45> with tape can be easily ordered from eight basic shapes and patterns.
• Dimensions can be specified in 1mm increments for sizes up to 1000 x 1000mm.
• It is compatible with strip shapes, square plates, and round plates, and can also choose from the basic patterns for perforation types.

Features

• It has excellent gas impermeability, electrical insulation, electrical properties, energy absorption, weather resistance, and ozone resistance.
• Compared to ordinary butyl rubber, it has improved adhesion.

Features

Features

Features

• It is black and measures 200mm square.
• Excellent impact resilience and abrasion resistance
• Its hardness is 60.
• Choose from thicknesses of 0.2, 0.4, 0.6, or 0.8mm.
• A physical properties table can be provided, and it is RoHS compliant.