This product is used for the following applications:

• Concrete placement in general

• Features

• Microscopic water-resistant inverters, for concrete vibrators, are protected from the ingress of water and dust even under severe operating conditions in concreting. Inverters come equipped with error display and various safety circuits to increase work efficiency and ensure safety.

  Highly water-resistant

  With its body case made of die-cast aluminum, this inverter is water-resistant at a protection grade of IP55 (jet protection type) or equivalent. Thus more water-resistant, the inverter can provide its jet washer to clean mortar adherents and other foreign matter after work. Moreover, the board vulnerable to water and dust can be separated from portions equipped with output outlets, operation switches, or other consumables to keep the effects on the board, which is the heart of the inverter, to a necessary minimum. For cleaning, do not lay it down or put it upside down. Do not apply a jet water stream directly to the switch packings or bottom cooling fans. Any such practice might cause trouble.

  

  Lamp display in the case of trouble

  The 100 V type of this series has as its standard equipment a display feature that uses an LED lamp to warn of any input power supply deviating from the operating range. Moreover, if the inverter stops its output when the vibrator is overloaded or short-circuited, the LED display indicates it. [The green lamp goes on] input voltage normal, [the green lamp blinks] input voltage warning, [the red lamp blinks] input voltage error, [the red lamp goes on] output overload or something similar, resulting in output stoppage.

  

  An overvoltage protection circuit to protect the inverter from damage

  These inverters incorporate an overvoltage protection circuit to shut down the switch, thereby protecting the inverter from damage, when its input supply voltage becomes abnormally high.

  Equipped with an earth-leakage breaker

  An earth-leakage breaker is incorporated to detect earth leakage occurring between the inverter and vibrator and shut down the switch, thereby protecting the worker.

  Overload/short-circuit protection to prevent inverter damage

  An overload/short-circuit protection circuit is incorporated to stop output in order to protect the inverter from damage in the case of an inverter overload exceeding the output capacity of the inverter or an output short-circuit.

  Output frequency adjustable, with digital display for checking as well (for HC230B only)

  Frequency adjustment, which used to be performed by a volume control turn slider alone, is now aided by digital display. This enables speedy, reliable adjustment.

  Easy product management

  Up to three inverters can be piled on top of another for storage, to reduce storage footprint. For piling up, the inverters are each equipped with a metal lock at the bottom to ensure that they are firmly fixed.

  

  Specification

   

  HC-B

   

  Model	Input				Output				Nos.of socket outlet	Weight （kg）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	9.8
  HC113B	1.5		15		1.3		15.0		2	10.0
  HC116B	2.0		20		1.6		19.0			10.1
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	15.5

  （Imperial System）

  Model	Input				Output				Nos.of socket outlet	Weight （lb）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	21.6
  HC113B	1.5		15		1.3		15.0		2	22
  HC116B	2.0		20		1.6		19.0			22.3
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	34.2

  *The weight of cable is included. （0.95Kg for HC111B～116B, 1.3Kg for HC230B）

  HC-B lamp status table

   

  Vibrator	Lamp indication		Switch	Input voltage		Abnormal state
  	Green	Red		Status	Voltage
  Poor or Weak	Blinking	Lights off	ON	Warning	60－80V	The input voltage is low due to the extension of the input cable or other reasons.
  	Lights off	Blinking		Abnormal	－60V
  Stop	Lighting	Lighting	ON	Normal	80－120V	When a short circuit occurs in the vibrator, or when the inverter output stops due to an overload caused by operation beyond the number of use.
  	Blinking			Warning	60－80V
  					120－140V
  	Lights off			Abnormal	－60V
  Stop	Lights off	Lights off	OFF	Abnormal	140V－	If the input voltage is overvoltage.
  				Normal warning	60－140V	When an electrical leakage is generated in the inverter or the vibrator.

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	Dimension（mm）
  	L	W	H
  HC111B	366	251	252
  HC113B
  HC116B
  HC230B	428	324	277

  （Imperial System）

  Model	Dimension（in）
  	L	W	H
  HC111B	1’2″	9.88″	9.92″
  HC113B
  HC116B
  HC230B	1’5″	1’7″	10.91″

This product is used for the following applications:

• Concrete placement in general

• Features

  Microscopic water-resistant inverters, for concrete vibrators, are protected from the ingress of water and dust even under severe operating conditions in concreting. Inverters come equipped with error display and various safety circuits to increase work efficiency and ensure safety.

  Highly water-resistant

  With its body case made of die-cast aluminum, this inverter is water-resistant at a protection grade of IP55 (jet protection type) or equivalent. Thus more water-resistant, the inverter can provide its jet washer to clean mortar adherents and other foreign matter after work. Moreover, the board vulnerable to water and dust can be separated from portions equipped with output outlets, operation switches, or other consumables to keep the effects on the board, which is the heart of the inverter, to a necessary minimum. For cleaning, do not lay it down or put it upside down. Do not apply a jet water stream directly to the switch packings or bottom cooling fans. Any such practice might cause trouble.

  

  Lamp display in the case of trouble

  The 100 V type of this series has as its standard equipment a display feature that uses an LED lamp to warn of any input power supply deviating from the operating range. Moreover, if the inverter stops its output when the vibrator is overloaded or short-circuited, the LED display indicates it. [The green lamp goes on] input voltage normal, [the green lamp blinks] input voltage warning, [the red lamp blinks] input voltage error, [the red lamp goes on] output overload or something similar, resulting in output stoppage.

  

  An overvoltage protection circuit to protect the inverter from damage

  These inverters incorporate an overvoltage protection circuit to shut down the switch, thereby protecting the inverter from damage, when its input supply voltage becomes abnormally high.

  Equipped with an earth-leakage breaker

  An earth-leakage breaker is incorporated to detect earth leakage occurring between the inverter and vibrator and shut down the switch, thereby protecting the worker.

  Overload/short-circuit protection to prevent inverter damage

  An overload/short-circuit protection circuit is incorporated to stop output in order to protect the inverter from damage in the case of an inverter overload exceeding the output capacity of the inverter or an output short-circuit.

  Output frequency adjustable, with digital display for checking as well (for HC230B only)

  Frequency adjustment, which used to be performed by a volume control turn slider alone, is now aided by digital display. This enables speedy, reliable adjustment.

  Easy product management

  Up to three inverters can be piled on top of another for storage, to reduce storage footprint. For piling up, the inverters are each equipped with a metal lock at the bottom to ensure that they are firmly fixed.

  

  Specification

  HC-B

  Model	Input				Output				Nos.of socket outlet	Weight （kg）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	9.8
  HC113B	1.5		15		1.3		15.0		2	10.0
  HC116B	2.0		20		1.6		19.0			10.1
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	15.5

  （Imperial System）

  Model	Input				Output				Nos.of socket outlet	Weight （lb）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	21.6
  HC113B	1.5		15		1.3		15.0		2	22
  HC116B	2.0		20		1.6		19.0			22.3
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	34.2

  *The weight of cable is included. （0.95Kg for HC111B～116B, 1.3Kg for HC230B）

  HC-B lamp status table

  Vibrator	Lamp indication		Switch	Input voltage		Abnormal state
  	Green	Red		Status	Voltage
  Poor or Weak	Blinking	Lights off	ON	Warning	60－80V	The input voltage is low due to the extension of the input cable or other reasons.
  	Lights off	Blinking		Abnormal	－60V
  Stop	Lighting	Lighting	ON	Normal	80－120V	When a short circuit occurs in the vibrator, or when the inverter output stops due to an overload caused by operation beyond the number of use.
  	Blinking			Warning	60－80V
  					120－140V
  	Lights off			Abnormal	－60V
  Stop	Lights off	Lights off	OFF	Abnormal	140V－	If the input voltage is overvoltage.
  				Normal warning	60－140V	When an electrical leakage is generated in the inverter or the vibrator.

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	Dimension（mm）
  	L	W	H
  HC111B	366	251	252
  HC113B
  HC116B
  HC230B	428	324	277

  （Imperial System）

  Model	Dimension（in）
  	L	W	H
  HC111B	1’2″	9.88″	9.92″
  HC113B
  HC116B
  HC230B	1’5″	1’7″	10.91″

This product is used for the following applications:

• Concrete placement in general

• Features

  Microscopic water-resistant inverters, for concrete vibrators, are protected from the ingress of water and dust even under severe operating conditions in concreting. Inverters come equipped with error display and various safety circuits to increase work efficiency and ensure safety.

  Highly water-resistant

  With its body case made of die-cast aluminum, this inverter is water-resistant at a protection grade of IP55 (jet protection type) or equivalent. Thus more water-resistant, the inverter can provide its jet washer to clean mortar adherents and other foreign matter after work. Moreover, the board vulnerable to water and dust can be separated from portions equipped with output outlets, operation switches, or other consumables to keep the effects on the board, which is the heart of the inverter, to a necessary minimum. For cleaning, do not lay it down or put it upside down. Do not apply a jet water stream directly to the switch packings or bottom cooling fans. Any such practice might cause trouble.

  

  Lamp display in the case of trouble

  The 100 V type of this series has as its standard equipment a display feature that uses an LED lamp to warn of any input power supply deviating from the operating range. Moreover, if the inverter stops its output when the vibrator is overloaded or short-circuited, the LED display indicates it. [The green lamp goes on] input voltage normal, [the green lamp blinks] input voltage warning, [the red lamp blinks] input voltage error, [the red lamp goes on] output overload or something similar, resulting in output stoppage.

  

  An overvoltage protection circuit to protect the inverter from damage

  These inverters incorporate an overvoltage protection circuit to shut down the switch, thereby protecting the inverter from damage, when its input supply voltage becomes abnormally high.

  Equipped with an earth-leakage breaker

  An earth-leakage breaker is incorporated to detect earth leakage occurring between the inverter and vibrator and shut down the switch, thereby protecting the worker.

  Overload/short-circuit protection to prevent inverter damage

  An overload/short-circuit protection circuit is incorporated to stop output in order to protect the inverter from damage in the case of an inverter overload exceeding the output capacity of the inverter or an output short-circuit.

  Output frequency adjustable, with digital display for checking as well (for HC230B only)

  Frequency adjustment, which used to be performed by a volume control turn slider alone, is now aided by digital display. This enables speedy, reliable adjustment.

  Easy product management

  Up to three inverters can be piled on top of another for storage, to reduce storage footprint. For piling up, the inverters are each equipped with a metal lock at the bottom to ensure that they are firmly fixed.

  

  Specification

  HC-B

  Model	Input				Output				Nos.of socket outlet	Weight （kg）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	9.8
  HC113B	1.5		15		1.3		15.0		2	10.0
  HC116B	2.0		20		1.6		19.0			10.1
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	15.5

  （Imperial System）

  Model	Input				Output				Nos.of socket outlet	Weight （lb）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	21.6
  HC113B	1.5		15		1.3		15.0		2	22
  HC116B	2.0		20		1.6		19.0			22.3
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	34.2

  *The weight of cable is included. （0.95Kg for HC111B～116B, 1.3Kg for HC230B）

  HC-B lamp status table

  Vibrator	Lamp indication		Switch	Input voltage		Abnormal state
  	Green	Red		Status	Voltage
  Poor or Weak	Blinking	Lights off	ON	Warning	60－80V	The input voltage is low due to the extension of the input cable or other reasons.
  	Lights off	Blinking		Abnormal	－60V
  Stop	Lighting	Lighting	ON	Normal	80－120V	When a short circuit occurs in the vibrator, or when the inverter output stops due to an overload caused by operation beyond the number of use.
  	Blinking			Warning	60－80V
  					120－140V
  	Lights off			Abnormal	－60V
  Stop	Lights off	Lights off	OFF	Abnormal	140V－	If the input voltage is overvoltage.
  				Normal warning	60－140V	When an electrical leakage is generated in the inverter or the vibrator.

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	Dimension（mm）
  	L	W	H
  HC111B	366	251	252
  HC113B
  HC116B
  HC230B	428	324	277

  （Imperial System）

  Model	Dimension（in）
  	L	W	H
  HC111B	1’2″	9.88″	9.92″
  HC113B
  HC116B
  HC230B	1’5″	1’7″	10.91″

This product is used for the following applications:

• Concrete placement in general

• Features

  Microscopic water-resistant inverters, for concrete vibrators, are protected from the ingress of water and dust even under severe operating conditions in concreting. Inverters come equipped with error display and various safety circuits to increase work efficiency and ensure safety.

  Highly water-resistant

  With its body case made of die-cast aluminum, this inverter is water-resistant at a protection grade of IP55 (jet protection type) or equivalent. Thus more water-resistant, the inverter can provide its jet washer to clean mortar adherents and other foreign matter after work. Moreover, the board vulnerable to water and dust can be separated from portions equipped with output outlets, operation switches, or other consumables to keep the effects on the board, which is the heart of the inverter, to a necessary minimum. For cleaning, do not lay it down or put it upside down. Do not apply a jet water stream directly to the switch packings or bottom cooling fans. Any such practice might cause trouble.

  

  Lamp display in the case of trouble

  The 100 V type of this series has as its standard equipment a display feature that uses an LED lamp to warn of any input power supply deviating from the operating range. Moreover, if the inverter stops its output when the vibrator is overloaded or short-circuited, the LED display indicates it. [The green lamp goes on] input voltage normal, [the green lamp blinks] input voltage warning, [the red lamp blinks] input voltage error, [the red lamp goes on] output overload or something similar, resulting in output stoppage.

  

  An overvoltage protection circuit to protect the inverter from damage

  These inverters incorporate an overvoltage protection circuit to shut down the switch, thereby protecting the inverter from damage, when its input supply voltage becomes abnormally high.

  Equipped with an earth-leakage breaker

  An earth-leakage breaker is incorporated to detect earth leakage occurring between the inverter and vibrator and shut down the switch, thereby protecting the worker.

  Overload/short-circuit protection to prevent inverter damage

  An overload/short-circuit protection circuit is incorporated to stop output in order to protect the inverter from damage in the case of an inverter overload exceeding the output capacity of the inverter or an output short-circuit.

  Output frequency adjustable, with digital display for checking as well (for HC230B only)

  Frequency adjustment, which used to be performed by a volume control turn slider alone, is now aided by digital display. This enables speedy, reliable adjustment.

  Easy product management

  Up to three inverters can be piled on top of another for storage, to reduce storage footprint. For piling up, the inverters are each equipped with a metal lock at the bottom to ensure that they are firmly fixed.

  

  Specification

  HC-B

  Model	Input				Output				Nos.of socket outlet	Weight （kg）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	9.8
  HC113B	1.5		15		1.3		15.0		2	10.0
  HC116B	2.0		20		1.6		19.0			10.1
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	15.5

  （Imperial System）

  Model	Input				Output				Nos.of socket outlet	Weight （lb）
  	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）	Capacity （kVA）	Voltage （V）	Current （A）	Frequency （Hz）
  HC111B	1.3	100	13	50/60	1.03	48	12.4	240	1	21.6
  HC113B	1.5		15		1.3		15.0		2	22
  HC116B	2.0		20		1.6		19.0			22.3
  HC230B	3.8	200	11.0		3.0		36.0	100～240	3	34.2

  *The weight of cable is included. （0.95Kg for HC111B～116B, 1.3Kg for HC230B）

  HC-B lamp status table

  Vibrator	Lamp indication		Switch	Input voltage		Abnormal state
  	Green	Red		Status	Voltage
  Poor or Weak	Blinking	Lights off	ON	Warning	60－80V	The input voltage is low due to the extension of the input cable or other reasons.
  	Lights off	Blinking		Abnormal	－60V
  Stop	Lighting	Lighting	ON	Normal	80－120V	When a short circuit occurs in the vibrator, or when the inverter output stops due to an overload caused by operation beyond the number of use.
  	Blinking			Warning	60－80V
  					120－140V
  	Lights off			Abnormal	－60V
  Stop	Lights off	Lights off	OFF	Abnormal	140V－	If the input voltage is overvoltage.
  				Normal warning	60－140V	When an electrical leakage is generated in the inverter or the vibrator.

  Dimensions, installation, control panel

  Product dimensional drawings

  

  Product dimensional table

  Model	Dimension（mm）
  	L	W	H
  HC111B	366	251	252
  HC113B
  HC116B
  HC230B	428	324	277

  （Imperial System）

  Model	Dimension（in）
  	L	W	H
  HC111B	1’2″	9.88″	9.92″
  HC113B
  HC116B
  HC230B	1’5″	1’7″	10.91″