Features

Protection plate is clear and colorless
Used for eye protection and protection from burn injury by cutting chip.

Applications

• Most suitable for organizing working tools and equipments.

Features

• A built in strong magnet.
• Can be mounted anywhere.
  ＜Method of Mounting＞
  In case mounting subject is steel, it attracts strongly by magnet.
  In case of none metal, it should be fixed with a screw as there is a mounting hole on main body

Applications

Most suitable fixture for measuring and marking-off, etc..

Features

3 surface attracting type

• Can make high precision measurement without scratching subject.
• 3 side work face, with the upper and both side surfaces.
• Efficiently measures an irregular shaped subject.

1 surface attracting type

• Magnet is set in conventional measuring square block.
• Easy quick-release with lever operation without using screw.
• Attracting surface is V-surface and upper surface

Specifications

Applications

Most suitable as holding jigs having strong magnetic force for marking-off, grinding and measuring work.

Features

• Easy quick-release by handle.
• A built in strong magnet.
• 2 way upper and lower surface attraction.

Specifications

Applications

Suitable for one by one steel plate loading to a machine (Press/shear)

Features

• 2 rails on magnetic pole face exert full separation capacity.
• Separates half-finished press parts and indeterminate form parts besides steel plate.
• Can separate oily or piled up steel plates one by one.
• Compact type with high performance ferrite magnet.

*1 set with 2 pieces each

Specifications

Principle Of Spacer

By inducing the same magnetic pole to steel plates piled up against magnetic pole face, the steel plates are separated with the repelling force of homopolar.

Test Data (Separation Capacity）

• Size of steel plate：300×600mm(Using KMF-1,2,3,4)
• Size of steel plate：100×300mm(Using KMF-01,02）

Applications

• Most suitable for marking-off, measuring work, cutting variant form subject and drilling on round bar

Features

• The magnetic force activates on three surfaces: the V-groove, bottom face, and back side.
• High precision finish.
• A built-in strong magnet.

Specifications

Attracting subject: S15Cφ20 round bar

Applications

Most suitable as a fixer for precision work like measurement, marking-off, etc

Features

• Quick release with handle operation
• Use 2 pieces as one set, finished with identical dimension accuracy.
• Can hold round bar and flat plate with V-groove structure.
• High precision finish

Specifications

Attracting subject: S15Cφ20 round bar

Applications

• Use this in food, chemical factories, and various fields to collect scraps of iron, cutting chips, clean, separate screws, and remove chips from casting sand.

Features（KHC）

• Shows compact and strong attracting power
• It is strongly built, even without using a switch over handle.

Features（KHD, KHD-2, KHF-1013, KMK-40）

• Easily switch the magnetic force On and Off with a lever. (Except KHC)
• We built a stable and strong magnet with light operation and easy handling.
• Its unconventional square shape allows use of corners that were difficult for round-shaped hand magnets.
• It uses easily carriable aluminum body, and switching ON/OFF can be easily done by one hand. (Except KMK-40)

Specifications

Applications

Used for temporary holding for welding and assembling.

Features

• Can adjust angle freely with 2 combined magnetic holders.
• The V-groove structure can be set on both flat and curved surfaces.

Specifications

Applications

• Convenient for removing iron powder left after drilling work and pulling out various materials from a long hole.
• KMKF-1 is in a spring type flexible structure

KMK-1, KMK-2,  KMKF-1

Specifications

 KMK-40

Specifications

By pulling the grip from a to b, magnetic substances: steel cans and cutting chips are released.

Applications

Used for fixing flux tab

Features

Basic flux tab retainer

Specifications

Applications

Most suitable for measuring equipment at construction site, bridgework, shipyard, etc.

Features

• With powerful magnet inside, can easily attach anywhere.
• Even a single worker can make accurate measurement, anyone handle easily.
• With a large scalene triangle structure, you can easily check the angle, an obstacle up to 150mm blocks the measurement spot.
• It has 2 side work face and with strong magnetic power holds the unit perfectly.
• Safety design by hanging plumb at the time of measurement.
• Scale with magnet has attached.

Specifications

Applications

• Cleans floor by attracting and removing scraps.
• Release scraps by stepping a pedal.

Applications

Most suitable for extracting steel plates and carrying moulds and materials.

Features

• Small, 1.6kg light weight and strong magnetic force.
• Easy quick-release.
• It is a permanent magnet, hence no power source required.

Usage

1. Remove dusts on the work face of handy lifting magnet and the attractive face of lifting load.
2. Put the handy lifting magnet on the lifting load and set up the handle in vertical position.
3. Confirm if the load has completely attracted.
4. Carry the load.
5. Push down the handle after placing the load in a stable position to release the handy lifting magnet.
   

Specifications

Caution

1. Holding power indicates the value in which attracting subject is attracted with 10mm thickness and SS400 as the equivalent material.
2. Use handy lifting magnet with 1/4 of the value considering lifting conditions.
3. It can’t be used with a crane or such.

Applications

Used for temporary fixing for welding and assembling

Features

Simple type holder which can be used as a 2 face holder for welding and assembling.

Specifications

Applications

With small and lightweight shape exerts strong magnetism for temporary fixing on welding and assembling.

Features

3 types of retention angle are available 45°,90°,135°
Compact size enables usage at limited working area.

Specifications

Applications

• This is to aid machining process for steel plate, round bar, etc. with strong magnetic force.
• Most suitable for tightly holding workpiece at 45°,135°and 90°for welding,drilling and filing.
• Can control ON/OFF easily with switchover lever.
• Most suitable for welding jigs and fixtures

Specifications

Features

This use for checking overhanging measurement of cutting edge installed on arbor of boring machine.

Specifications

Specifications

Specifications

Specifications

※KBF-1005H has “H” engraved mark.

Features

• Thin type magnet holder with neodymium magnet.
• Most suitable for implanting press mould, etc.
• Can mill and grind the holder which have machining margin.

Applications

• Holding a scale, attracting and conveying small parts.

Features

• Exerting unprecedented innovative strong magnetic force by new design.
• Widely used by installing a fixture on back side tapped hole.
• Exerting unprecedented strong magnetic force for thin steel plate.（KBR25～50）

Applications

• Most suitable for spot lighting at machinery factory, steel shelf, work line, etc.
• Most suitable for factory work, assembly and inspection line and precision machinery inspection station.

Features

• By On/OFF switch, setting and releasing is very easy.
• With flexible arm, adjusting beam angle is effortless.
• Can be widely used on flat and curved surfaces as per its V-groove work face.

※Light bulb is not included（ＫＭＬ-1，1Ｍ，２Ｆ）

Applications

• Most suitable as a general measuring aid for improving accuracy and operating efficiency.

Features

• Holds measuring instrument such as dial gauge for general measurement and various measurements at machine tool job site.
• Set it on vertical surfaces, flat surfaces, and round bars with 60–90 kg.

Specifications

Applications

• Most suitable for holding steel plate, steel material, etc. as a welding auxiliary tool.
• Used for holding scale also.

Features

• Strong holding power by using high quality Alnico magnet.

※Handle for KMS is an optional exter.（Handle：Stock No.S9961101)

Applications

• Widely utilized in various fields as magnetic base holder.

Features

• Permanent magnet holder with ON-OFF mechanism.
• Use application is unlimited by utilizing center tap and machining body.

Application

• Use ISM-2 for guiding direction during transportation and adjusting position during locating.
• Operator can transport workpiece with keeping distance.

Features

• Strong magnet has applied. Even if it has mill scale surface ISM-2 holds workpiece firmly.
• Operator does not have to touch magnet nor workpiece when the operator remove magnet because ISM-2 can be removed by the principle of leverage.

*Operating temperature limit is less than 80 degree Celsius.

Applications

Most suitable for an automated equipment for press and a shearing line and hanging transportation of sheet metal for automobile.

Features

KPMLC can convey workpiece without scratching the surface.
KPLC has four variations, A, B, C, and D type, depending on the use application or method of mounting.

Specifications

Applications

Install KPML under the conveyor belt to hold workpieces, like punching dies, cans, various parts, and products, during transportation.

Features

KPML-A Type

Fine pole pitch. This structure is suitable for an angled conveyor and a vertical conveyor.
M10 or M12 bolts at side surface. Using these bolts and nuts, KPML-A type has fixed at frame.

KPML-B Type

Compare to other type, KPML-B type can attract magnetic body from farther place.
So B type has used for holding a thin steel plate on a hanging conveyor.
KPML-B has mounted by M8 bolts from the upper surface.

KMPL-A　　Maximum Flux Density　0.1T(1,000G)

KPML-B　　Maximum Flux Density　0.1T（1,000G）

Applications

Used for transporting steel plate and steel pipe, preventing slip and speed control for line.

Features

The magnet is semipermanent and installs easily.
Most suitable for transporting and holding steel plate.

Holding Power of KPMR21.7V

Applications

Used for transporting steel plates and steel pipes, preventing slip and speed control for a line.

Features

• Installs easily.
• Magnet has long product life.
• Most suitable for transporting and holding a steel plate.
• V-shaped roller for a steel pipe is also available.

Work face is hard chrome plating finish.

Applications

Sterical transfer of small magnetic parts and carrying out magnetic chips from a miller, a gear cutter, a broaching machine, a plano miller and etc.

Features

Maintenance-free
These are no movable parts outside. This achieves safety and durability.

Compact Size
This can install at the narrow space where ordinary conveyor system cannot fit in.

Arbitrarily-specified Installation Angle
Angle of the leveling pad and the fixing bracket of forefront (for without gutter type) are adjustable. This makes angled installation easier.

※Hishiko supplies the helical conveyor with gutter and without gutter. The model number of the helical conveyor with gutter includes “G”

Example of Model

i.e.1: Ø76.3 with gutter, pipe length 1,200mm, KKBH-1G-12
i.e.2: Ø101.6 without gutter, pipe length 2,000mm, KKBH-2-20
※Both types come with 3 meters 4 cores cabtire cable.
※Hishiko does not do wiring.
※Hishiko can prepare custom length pipe as well as standard length.

！Note！

※The capacity may change according to the type of chips and/or cutting fluid.
※ If installation angle is more than 60degree, chips or parts may not drop properly.
Please consult our sales personnel or your agent before purchase.
※The chips and/or parts whose length is more than 60mm may not transfer properly.
※This product cannot transfer viscous sludge like things.

Applications

KEML has used for a hanging conveyor in a plating line or a shearing line which needs magnetic force adjustment function or ON/OFF function.

Features

Shows good anti air gap characteristic. This characteristic is suitable for holding a thin steel plate.

Applications

Inputting mixed aluminum and iron, a combination of belt conveyor and magnet.

Features

Facilitates the dispose of industrial waste.

TYPE: BBH100

• Disposal capacity： 100kg/Hour
• Ratio of iron and aluminum： 50%, 50％
• Feeding speed： 5.000mm/min
• Rate of separation： Target value 10％ (In case of dry cutting chip)
  ＊Option: Iron sand removal unit. Increase the rate of separation by 5% with separation. Disposal capacity: 100kg/H～500kg/H

Applications

• Used for removing small iron pieces such as pins and iron powder from powder and granular material.
• Install KMSSR at the middle or exit of the duct, spout of the conveyor line, and similar locations.

Features

• KMSSR has designed so that powder touches magnetic bars uniformly.
• Regular iron removal is necessary. The case threadably mounts these magnetic bars, allowing for easy dismounting.

Specifications

Maximum Flux Density　0.1T（1,000G)

Applications

• Used for removing small iron pieces such as pins and iron powder from powder and granular material.
• Install KMSS at the middle or exit of the duct, spout of the conveyor line, and similar locations.

Features

• KMSS has designed so that powder touches magnetic bars uniformly.
• Regular iron removal is necessary. The case threadably mounts these magnetic bars, allowing for easy dismounting.

Specifications

Maximum Flux Density　　0.1T(1,000G)

Applications

Use for iron removal from food products, chemical products, drugs, feedstuffs and etc.

Features

• KMSK is the part of the grid magnet. To install the frame, wing bolt (M5×12) is convenient as a finger grip. A wing bolt does not come with KMSK.
• The surface of KMSK shows alternate polarity. In case of lining up more than one magnetic bar, magnetic poles of each magnetic bar should alternate.
• Strong magnetic bar using rare earth magnet is also available. These are B, HHK and SHK type.

KMSK

Maximum Flux Density0.1T（1,000G）

KMSK-HHK

Maximum Flux Density 1.0T（10,000G)

KMSK-SHK

Maximum Flux Density 1.2T（12,000G)

KMSK-B

Maximum Flux Density 0.3T（3,000G)

Specification

Pulling the grip from A to B releases magnetic substances such as steel cans and cutting chips.

Applications

• KSED can apply for the unit which can separate and recover non-ferrous metals such as aluminum from waste.
• Used for removing iron from pulp chip, fertilizer, feedstuff, glass, crashed mineral ore, food and drug.

Features

• Strong magnetic field has generated by using Neodymium magnet.
• KSED can apply to a high speed rotation equipment due to its tough structure. Also KSED can show stable performance for long period.

Applications

• KPLD has dual structure with outer rotating stainless drum and inner fixed magnetic pole.
• They fix the axes on both ends.
• In general, chain and sprocket make KPLD drive. Impetus of material flow can also rotate the drum.

Features

• Easy handling, installation and maintenance.
• Rectifier is not required.
• Magnet has long product life

Applications

Automatically remove iron (bolt, nut, iron powder, etc.) in powder and granular material.
Used for removing iron from pulp chip, fertilizer, feedstuff, glass, crashed mineral ore, food, drug and so on.

Features

• Since the magnetic pole have fixed, the system requires energy only to rotate the outer drum, which makes it economical.
• Easy installation and handling with permanent magnet.
• Both ends fix the axes.

In case of the order, please advise following conditions.

• Type of the Material, Throughput, Apparent Specific Gravity, Granularity, Temperature, Moisture Content.
• The size and quantity of iron scrap and etc.
• Layout.

Applications

• Used for iron removal and transportation

Features

• Easy installation, handling and maintenance.
• Strong magnetic force and long product life.
  

Effective Range（Example） (mm)