Features of HPC-156WDF

Innovative lightweight and cordless model for punching φ15 / t6 stainless steel.

• “Double acting” hydraulic return for jam-free operation.
• The new punch design makes it easier to confirm the hole position.
• A hole puncher is specifically designed to provide high-quality holes quickly and efficiently.
• Max. hole size: φ15 ⁄ t6mm（Stainless steel).

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum or steel, please consult with us

Punching Throat [Unit: mm]

Model: FK-HP800EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 800 kg for FK-HP800EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 20 mm
• Pressurizing capacity: 800 kg
• Open height: 70-190 mm
• Table area: 170 mm x 320 mm
• Depth from the center: 100 mm
• Overall height: 320 mm
• Installation area: 240 mm x 400 mm
• Total weight: 16 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-HP500EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 500 kg for FK-HP500EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 15 mm
• Pressurizing capacity: 500 kg
• Open height: 70-110 mm
• Table area: 110 mm x 250 mm
• Depth from the center: 70 mm
• Overall height: 290 mm
• Installation area: 140 mm x 320 mm
• Total weight: 7.2 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-HP200EX

Features

High power

Cam system handpress FK-HP series is a hand press that adopts the principle of cam (theory of converting rotary motion to reciprocating motion). By applying the cam, a slight force is converted into a large force, making it possible to easily remove rubber and the like. You can obtain great power that is not available in conventional lever applications and rack-type hand presses. The maximum pressurization capacity is about 200 kg for FK-HP200EX

Easy to operate

Since it is a manual type, there is no hassle and it is easy to set, so you can start working immediately. Various operations such as making ring-shaped packing and caulking are possible, including drilling round, long holes, squares, and deformed holes. Of course, the open height and handle can be set freely, so it is versatile and supports a wide range of work.

Quiet operation

Most of the drilling tools used so far made a loud noise during work, but this machine does not make any noise at all. It’s even smaller, so it’s easy to move and doesn’t take up much space.

Specification

• Stroke: 11 mm
• Pressurizing capacity: 250 kg
• Open height: 55-90 mm
• Table area: 70 mm x 170 mm
• Depth from the center: 50 mm
• Overall height: 220 mm
• Installation area: 110 mm x 210 mm
• Total weight: 3.3 kg
• Accessories: Punching base / L wrench set

Drilling ability

Unit: mm

Model: FK-C13; FK-C24; FK-C27; FK-C33; FK-C40

Specification

● 5 mm to 13 mm / FK-C05 to FK-C13 …………… Standard price 1,700 yen

● 14 mm to 24 mm / FK-C14 to FK-C24 ………….. Standard price 1,900 yen

● 25 mm to 27 mm / FK-C25 to FK-C27 ………….. Standard price 2,200 yen

● 28mm-33mm / FK-C28-FK-C33 ………….. Standard price 2,600 yen

● 34 mm-40 mm / FK-C34-FK-C40 ………….. Standard price 2,800 yen

● Material S45C / quenching hardness HRC57

Model: FK-P17-H

Specification

Install the spare blade punch. The pin at the tip is pulled by the force of the internal spring
Push out what you pulled out.
● Total length: 150 mm
● Material S45C / No quenching
● Plating

Features

The new “N” series punchers are double acting and have a new designed punch holder for longer life.

The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron and channel steel.

The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification

Materials Dimensions [Unit: mm]

H-section steel

Minimum 100 x 100
Maximum 300 x 150

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
10	SB10	t2 ~ t6	t8	t3 ~ t4
11	SB11	t2 ~ t9	t8	t3 ~ t6
12	SB12	t2 ~ t9	t8	t3 ~ t6
13	SB13	t2 ~ t9	t8	t3 ~ t6
14	SB14	t2 ~ t9	t8	t3 ~ t6
15	SB15	t2 ~ t9	t8	t3 ~ t6
16	SB16	t2 ~ t9	t8	t3 ~ t6
18	SB18	t2 ~ t9	t8	t3 ~ t6
19	SB19	t2 ~ t9	t8	t3 ~ t6
20	SB20	t2 ~ t9	t8	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t8	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t8	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t9	t8	t3 ~ t6
12×18	12 × 18B	t2 ~ t9	t8	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t9	t8	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t9	t8	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t9	t8	t3 ~ t6

Punching Throat [Unit:mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

Machine body dimensions

A: 137 mm   B: 52.5 mm   C: 205 mm   D: 155 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N209WDF

“N” series puncher cordless model

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t9mm（MILD STEEL)

Punching Throat [Unit:mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N208WDF

“N” series puncher cordless model

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t8mm（MILD STEEL)

Punching Throat [Unit:mm]

A: 8.5 mm   B: 40 mm   C: 15 mm   D: 62.5 mm   E: 90 mm   F: 38.5 mm

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-NF188WBL

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

HPC-NF188WBL

• With a new brushless motor, high-power drilling.
• N series puncher that can drill holes in narrow parts flexibly because the head part is tiltable up to 90 ° ^* and the motor part rotates 360 °. * The angle that can be fixed with the positioning knob is in two stages: 0 ° and 90 °.

Specification of HPC-NF188WBL

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum or steel, please consult with us

Punching Throat [Unit: mm]

A: 8.5 mm   B: 38 mm   C: 15 mm   D: 61 mm   E: 88 mm   F: 39 mm

Dimensions for drilling holes from the wall [Unit: mm]

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-2213W

N series demo video

Features of HPC-N209W

The new “N” series punchers are double-acting and have a newly designed punch holder for longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic return for jam-free operation.
• The new punch design makes it easier to confirm the hole position.
• The hole puncher is specifically designed to provide high-quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t9mm（MILD STEEL)

Specification of HPC-N209W

Motor	Single-Phase, 110-120V/220-240V, 50/60Hz, 1050W Double Isulation
Max. Hole size	Mild steel (65,000 psi): φ20/t9 Stainless steel (89,000 psi): φ20/t6
Hole Shape	Round/Oblong
Max. Throat Depth	40mm
Weight	11.3kg
Dimensions	529mm (L)×127mm (W)×315mm (H)
Standard Accessories	Punch: φ14mm Die SB14mm Hydraulic oil #46 Work stand Carrying case Grip Strap Hex wrenches (3•4•5•8mm) Tommy bar Spanner (8 × 10mm)
Option	Slide stopper (Max. throat depth)

Materials Dimensions of HPC-N209W [Unit: mm]

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t8	t3 ~ t4
11	SB11	t2 ~ t9	t8	t3 ~ t6
12	SB12	t2 ~ t9	t8	t3 ~ t6
13	SB13	t2 ~ t9	t8	t3 ~ t6
14	SB14	t2 ~ t9	t8	t3 ~ t6
15	SB15	t2 ~ t9	t8	t3 ~ t6
16	SB16	t2 ~ t9	t8	t3 ~ t6
18	SB18	t2 ~ t9	t8	t3 ~ t6
19	SB19	t2 ~ t9	t8	t3 ~ t6
20	SB20	t2 ~ t9	t8	t3 ~ t6

Oblong Punch & Die [Unit: mm]

■ Thickness for long hole punches and dies [Unit: mm]

Oblong punch	Long die	General steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t8	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t8	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t9	t8	t3 ~ t6
12×18	12 × 18B	t2 ~ t9	t8	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t9	t8	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t9	t8	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t9	t8	t3 ~ t6

Punching Throat [Unit: mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N208W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, an,gle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic rejam-free jam free opThe newtion.
• New punch design makes it easier to confirm the hole pA holeion.
• Hole puncher is specifically designed tohigh-qualityh quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t8mm（MILD STEEL)

Specification of HPC-N208W

Motor	Single-Phase, 110-120V/220-240V, 50/60Hz, 710InsulationIsulation
Max. Hole size	Mild steel (65,000 psi): φ20/t8 Stainless steel (89000 psi) :φ20/t6
Hole Shape	Round/Oblong
Max. Throat Depth	40mm
Weight	10.3kg
Dimensions	487mm (L)×127mm (W)×315mm (H)
Standard Accessories	Punch: φ12mm Die SB12mm Hydraulic oil #46 Work stand Carrying case Grip Strap Hex wrenches (3•4•5•8mm) Tommy bar Spanner (8 × 10mm)
Option	Slide stopper (Max. throat depth)

Materials Dimensions of HPC-N208W [Unit: mm]

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t7.5	t3 ~ t4
11	SB11	t2 ~ t8	t7.5	t3 ~ t6
12	SB12	t2 ~ t8	t7.5	t3 ~ t6
13	SB13	t2 ~ t8	t7.5	t3 ~ t6
14	SB14	t2 ~ t8	t7.5	t3 ~ t6
15	SB15	t2 ~ t8	t7.5	t3 ~ t6
16	SB16	t2 ~ t8	t7.5	t3 ~ t6
18	SB18	t2 ~ t8	t7.5	t3 ~ t6
19	SB19	t2 ~ t8	t7.5	t3 ~ t6
20	SB20	t2 ~ t8	t7.5	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t7.5	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t7.5	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t8	t7.5	t3 ~ t6
12×18	12 × 18B	t2 ~ t8	t7.5	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t8	t7.5	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t8	t7.5	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t8	t7.5	t3 ~ t6

■ Punching Throat [Unit: mm]

A: 8.5 mm   B: 40 mm   C: 15 mm   D: 62.5 mm   E: 90 mm   F: 38.5 mm

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-NF188W

The new “N” series punchers are double-acting and have a newly designed punch holder for longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ18 ⁄ t8mm（MILD STEEL)

Specification of HPC-NF188W

Motor	Single phase 100V 710W 50 / 60Hz times Double insulation
Mass	10.7kg
Body dimensions	522 (L) x 149 (W) x 180 (H) mm
Depth	38mm
Hole shape	Round / long hole
Maximum drilling capacity	General steel (SS400 equivalent): Φ18 / t8
	Stainless steel (SUS304): Φ18 / t6
Standard accessories	Punch Φ12mm Die SB12 Nut tightening bar Hexagon wrench (3, 4, 5, 6) Spanner (8 × 10) Strap Hydraulic oil Product case Work stand
Option	Foot switch

Materials Dimensions of HPC-NF188W [Unit: mm]

Flat bar

Max: 75xt8 (Center Punching)

Angle Steel

Minimum 40 x 40 x t3
Maximum 75 x 75 x t6

Channel Flange 

Minimum 75 × 40
Maximum 100 × 50

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t7.5	t3 ~ t4
11	SB11	t2 ~ t8	t7.5	t3 ~ t6
12	SB12	t2 ~ t8	t7.5	t3 ~ t6
13	SB13	t2 ~ t8	t7.5	t3 ~ t6
14	SB14	t2 ~ t8	t7.5	t3 ~ t6
15	SB15	t2 ~ t8	t7.5	t3 ~ t6
16	SB16	t2 ~ t8	t7.5	t3 ~ t6
18	SB18	t2 ~ t8	t7.5	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t7.5	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t7.5	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t8	t7.5	t3 ~ t6
12×18	12 × 18B	t2 ~ t8	t7.5	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t8	t7.5	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t8	t7.5	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t8	t7.5	t3 ~ t6

Punching Throat [Unit: mm]

A: 8.5 mm   B: 38 mm   C: 15 mm   D: 61 mm   E: 88 mm   F: 39 mm

Dimensions for drilling holes from the wall [Unit: mm]

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N186W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, an,gle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification of HPC-N186W

Materials Dimensions of HPC-N186W [Unit: mm]

Round Punch & Die [Unit: mm]

Oblong Punch & Die [Unit: mm]

■ Punching Throat [Unit: mm]

N series demo video

Features of HPC-N6150W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification of HPC-N6150W

Materials Dimensions of HPC-N6150W [Unit: mm]

Round Punch & Die [Unit: mm]

Oblong Punch & Die [Unit: mm]

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum,m or steel, please consult with us.

Punching Throat (Punch + Long die) and (Long punch + Die) [Unit: mm]

A: 8.5   B: 50   C: 15   D: 96.5   E: 66   F: 90.5

A: 8.5   B: 50   C: 15   D: 61.5   E: 66   F: 55.5

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-156W

The HPC-156W is double-acting and has a newly designed punch holder for longer life. The punch is redesigned so that only one punch is required to punch the range of materials: mild steel, stainless steel, aluminum, and copper. The center of the punch has been made wider for easier positioning.

Specification

Materials Dimensions [Unit: mm]

Round Punch & Die [Unit: mm]

■ Oblong Punch & Die [Unit: mm]

Punching Throat [Unit: mm]