Manufacturer : Honda Kiko

Model : HCS/HC

Features

• Small sized rigid type, with casting, materials and manufacturing all being strictly controlled. This pump has excellent reliability and durability.
• Standardization allows the parts to be fully interchanged.
• This pump has high efficiency over a wide flow rate and excellent suction performance.
• This pump, through many years of performance and experience, has come to be used in a wide range of applications.

Applications

• • Water treating industries
    Water treatment of various waste water, Sewage and Purification.
  • Chemical industries
    Oil, Soda, Sulfuric acid and Chemical fertilizer.
  • Pollution control industries
    Waste water treatment at diversified industries.
  • Dye and bleaching industries
    Dye work process, Dye synthetic factories and Bleaching liquid treating process.
  • Oil and fat industries
    Oil refining, Soap and Paint producing factories and Fuel oil transfer.
  • Textile industries
    Spinning and Chemical fiber factories
  • Medicine and cosmetics industries
    Medicines, Agricultural chemicals, Cosmetic producers and Hospitals
  • Food and beverage industries
    Brewage vinegar and Japanese sake producing factories, Saltfield, Fruit juice factories, Beer and Milk factories.
  • Metal industries
    Plate, Steel plate, Wire and Coating industries.
  • Agricultural and fishery
    Sprinkling of agricultural chemicals, Fish farming and Sea water handling etc.

Design data

Accessories

• Base Plate
• Coupling
• Guard
• Anchor bolts/nuts

Design Concept

Materials List

Dimensional Drawing

A guide to above dimensional information

1. Pump selection number and output shall be combined with arrow.
2. Dimensions are subject to change.
3. 1=52  2=50  3=45  4=40  5=35
   In case of Double mechanical seal, the above dimensions shall be added to B and R total.

Manufacturer : Honda Kiko

Model : VTS(F)/VMS(F)

Features

• Multi-stage impeller type providing high lift capacity.
• The column pipe and the shaft enclosing pipe are united, and can accommodate in reduced space.
• Both single stage and double stage designs can be manufactured.
• To install in the sealed tank, a hermetic type mounting plate can be manufactured.
• Single Mechanical Seal or Gland Packing type can be adopted for seal system.

Applications

• Intake of Sea Water, Transport of Screen Cleaning Water at Power Generation Plant.
• Transport of Drain at Chemical Industry
• Transport of Drain at Pulp / Paper Industry
• Transport of Drain at Pharmaceutical industry
• Transport of Fuel Oil from the tank installed at underground.
• Transport of Chemical Liquid like Acid or Alkali.

Design Data

Accessories

• Coupling……………….1 set
• Strainer……………..…1 set
• Anchor bolts/Nuts……1 set

Manufacturer : Honda Kiko

Model : VNS

Features

• Flow rate: 0.05-6.0m 3 /min
• Head: 7-75m
• Temperature: 0-80℃
• By adopting a metal-free system that eliminates intermediate bearings and main body bearings, there is no fluid trouble in the bearings.
• Low vibration and stable continuous operation
• Can be manufactured for inside the tank and outside the tank

Applications

• For transporting electrodeposition paint and general paint
• For transfer of phosphoric acid slurry
• For transporting liquids including slurries from steel mills, smelters, cement factories, etc.
• For transferring liquids, including slurries, by the chemical industry, coke mills, etc.
• For transferring hot liquids containing sulfur and other slurries
• For transfer of mixed liquid slurry liquid in other general industries

Manufacturer : Honda Kiko

Model : VCS(F)/VOS(F)

• Flow rate: 0.1-6.0m 3 /min
• Head: 6-80m
• Temperature: 0-80℃

Model VCS(F)

Features

• Suited for the transportation of drain and clean water because the closed type impeller is adopted.
• The casing part is submerged, and suited for automated control by pumping the fluid up certainly.
• Smaller installation area may success to reduce the pump space.
• To install in the sealed tank, a hermetic type mounting plate can be manufactured.
• Broad parts interchangeability bringing faster maintenance, less downtime and inventories reduction.

Applications

• Transport of Drain at Power Generation Plant.
• Transport of Drain at Chemical Industry
• Transport of Drain and Clean Water at Semiconductor Industry
• Transport of Drain and Clean Water at Pulp/ Paper Industry
• Transport of Chemical Liquid like Acid or Alkali.

Design Data

Accessories

• Coupling……………….1 set
• Strainer……………..…1 set
• Anchor bolts/Nuts……1 set

Model VOS(F)

Features

• Suited for the transportation of slurry containing drain water because the semi-opened type impeller is adopted.
• The casing part is submerged, and suited for automated control by pumping the fluid up certainly.
• Smaller installation area may success to reduce the pump space.
• To install in the sealed tank, a hermetic type mounting plate can be manufactured.
• Broad parts interchangeability bringing faster maintenance, less downtime and inventories reduction.

Applications

• Transport of Drain at Power Generation Plant.
• Transport of Drain at Chemical Industry.
• Transport of Drain and Clean Water at Semiconductor Industry
• Transport of Drain and Clean Water at Pulp/ Paper Industry
• Transport of Chemical liquid like Acid or Alkali

Design Data

Accessories

• Coupling……………….1 set
• Strainer……………..…1 set
• Anchor bolts/Nuts……1 set

Design Concept

Materials List

Design Concept

Materials List

Manufacturer : Honda Kiko

Model : CHFWS/CHFW

Features

• Flow rate: 2.2-55m 3 /min
• Head: 10-121m
• Temperature: 0-200℃
• CHFWS has a big capacity and high head.
• Because of complete hydraulic balance, CHFWS has an excellent reliability.
• Horizontal split construction helps easy maintenance without disturbing motor and piping.
• CHFWS is designed for easy operation with high efficiency and low NPSH.

Applications

• Intake and transfer of sea water at Power Plant
• Water Intake, transfer and pressurization at Water Supply/ Drainage Plant
• Water intake and transfer at River
• Liquid circulation and transfer at Several Industries

Design Data

Accessories

• Base Plate..………….…1set
• Coupling……………….1 set
• Guard………………..…1 piece
• Anchor bolts/Nuts……1 set

Design Concept

Materials List

Manufacturer : Honda Kiko

Model : CLAS

Features

• Flow rate: 5-20m ³ /min
• Head: 6-25m
• Temperature: 0-100℃
• This is a centrifugal mixed flow pump with a low head (5m to 20m) and a large capacity (6 to 25m3/min).
• The foot support type back pull-out structure eliminates the need to remove the main pipe, making maintenance easy.

Applications

• For transferring wastewater and sea water
• Flue gas desulfurization equipment

Manufacturer : Honda Kiko

Model : CHAS

Features

• Flow rate: 0.2-2.5m ³ /min
• Head: 150-400m
• Temperature: 0-120℃
• High pressure (150 to 400m), medium capacity (0.2m3/min to 2.5m3/min) pump.
• High head can be obtained with multi-stage combination of round-cut type.
• Because the impeller is specially designed, NPSH is small and quiet operation is possible.

Applications

• For reverse osmosis
• For high pressure cleaning equipment
• For boiler water supply
• For hydrant pump
• For general water supply

Manufacturer : Honda Kiko

Model : CES

Features

• Flow rate: 2.1-17m ³ /min
• Head: 2-5m
• Temperature: 0-100℃
• Axial pump for low head (2 to 5m) and large capacity (2.1 to 17m3/min).
• Even fluids containing slurry can be transferred.

Applications

• For circulation of various tanks

Manufacturer : Honda Kiko

Model : 2CS

Features

• Flow rate: 0.08-0.7m ³ /min
• Head: 90-240m
• Temperature: 0-110℃
• It is a two-stage type with a bracket support and can handle up to a maximum lifting height of 240m.
• Stable operation is possible by adopting an opposed impeller.

Applications

• For boiler water supply
• High pressure cleaning equipment
• High-rise building water supply equipment

Manufacturer : Honda Kiko

Model : UGS/UGF

Features

• Flow rate: 0.05 to 7.0m ³ /min
• Head: 8 to 115m
• Temperature: -50 to 350℃
• Because of Back-Pull out structure, impeller and bearings can be easily removed without disturbing motor or piping.
• Designed from many years of experience, UGS has stable characteristics with high efficiency and small NPSH over the wide range of performance, and promises quiet operation.
• High interchangeabilities of parts construction.
• Max. temperature 450°(840°F)

Applications

• Boiler feed
• High temperature liquids
• Refinery
• Petro-chemical industries
• All other sorts of industries

Accessories

Design Data

Design Concept

Materials List

Dimensional Charts

Manufacturer : Honda Kiko

Model : CSPS

Features

• Flow rate: 0.09-1.0m 3 /min
• Head: 20-50m
• Temperature: 0-60℃
• Super self-priming pump that can handle suction heights up to -9m.
• The two-stage structure of open impeller and screw impeller has succeeded in shortening the self-priming time.
• Self-suction is possible when the suction side pipe is 10m to 30m.

Applications

• For aviation fuel pumping
• For tanker residual liquid pumping
• General industry

Manufacturer : Honda Kiko

Model : SPG(F)

Features

• Flow rate: 0.03-8.5m 3 /min
• Head: 5-85m
• Temperature: 0-40℃
• SP . SPG can be used continuously one it primed at the time of pump installation.
• SP . SPG can be primed in a short time because of its excellent self-priming performance.
• Continuous operation is possible in spite of ruggedness of Suction pipe or intaking of Air during operation.

Applications

• Water treating industry
• Dyestuff, Fertilizers
• Petro-chemical industry
• Food and Beverage industry
• Oil and Fat industry
• Electric Power industry
• All other sorts of industry

Design Data

Accessories

Design Concept

Materials List

Dimensional Charts

Manufacturer : Honda Kiko

Model : SP(F)

Features

• Flow rate: 0.03-8.5m 3 /min
• Head: 5-85m
• Temperature: 0-40℃
• SP . SPG can be used continuously one it primed at the time of pump installation.
• SP . SPG can be primed in a short time because of its excellent self-priming performance.
• Continuous operation is possible in spite of ruggedness of Suction pipe or intaking of Air during operation.

Applications

• Water treating industry
• Dyestuff, Fertilizers
• Petro-chemical industry
• Food and Beverage industry
• Oil and Fat industry
• Electric Power industry
• All other sorts of industry

Design Data

Accessories

Design Concept

Materials List

Dimensional Charts

Manufacturer : Honda Kiko

Model : MSP(F)/MSPG(F)

Features

• Flow rate: 0.03-17m ³ /min
• Head: 7-120m
• Temperature: 0-80℃
• Unique impeller and Volute casing construction achieved high efficiency and advance priming performance.
• Non-return valveless construction gives no trouble.
• Simple pump construction makes Solvent degreasing treatment easy.
• Foot valve and/or Check valve is unnecessary.
• MSP can be used up to 80℃ pumping temperature.
• MSP can be used for liquid contains slurry.

Applications

• Petro-chemical industry
• Water treating industry
• Chemical industry
• Oil refining industry
• All other sorts of industry

Design Data

Accessories

• Base —————– 1 Set
• Coupling ————– 1 Set
• Guard —————- 1 Set
• Anchor Bolts/nuts —– 1 Set

Constructions and Functions

1. This tornado pump is principally constructed by Casing, Impeller and Reservoir.
   Volute-casing has two vortex chambers, air-separator, and the preventing plate.
   This special volute construction creates advanced air separation.
2. The special impeller has an extra vacuum performance.
3. Reservoir remains necessary priming water for the next start-up even siphon phenomenon occurred.

Design Concept

Materials List

Manufacturer : Honda Kiko

Model : HBS

Features

• Flow rate: 0.03 to 0.38m 3 /min
• Head: 5 to 70m
• Temperature: -20 to 119℃
• Equipped with a screw-in semi-open impeller, it is possible to transfer a small amount of slurry.
• The BPO (back pull-out) type is compact and convenient to use.
• The foot support type back pull-out structure eliminates the need to remove the main pipe, making maintenance easy.

Applications

• petrochemical industry
• chemical industry
• general industry
• Industry

Features

• Flow rate: 0.08-2.25m 3 /min
• Head: 8-75m
• Temperature: -10-90℃
• Process pump conforming to ISO 2858 (JIS B 8313) 16 bar
• Back pull out type small size pump exclusive to 2 poles for easy maintenance.
• Foot supported Back-Pull Out construction makes maintenance easy without disturding piping.
• High efficiency saves electric cost.

Applications

• Petro-chemical Industries
• Chemical Industries
• All other sorts of Industries

Design Data

Design Concept

Materials List

Accessories

• Base Plate
• Coupling
• Guard
• Anchor bolts/nuts

Dimensional Charts

Manufacturer : Honda Kiko

Model : RG

Features

• Flow rate: 0.03-0.5m 3 /min
• Head: 150-650m
• Temperature: 0-120℃
• High efficiency saves electric cost.
• Low noises and vibration.
• Simplicity of pump construction eliminates maintenance.
• No close clearance makes performance stable and reliable.
• Less contact surface makes high mechanical reliability.
• Pulsation free pressure and flow.
• Economical installation.

Applications

• Reverse Osmosis
  Ultra-pure water supply, Desalination, Waste-water purification, Food concentration, Sea-water distillation, Biomedical.
• Pulp and Paper mills
  Cleaning of felts, screens and machinery.
• Boiler Feed
  Water supply to low and medium pressure boiler.
• Fuel Injection
  Carbon-black manufacturing, Kiln in cement plant, Boiler.
• Shop machinery and Car Industry
  Cleaning of gun-drilled parts,
  Hydrostatic equipment,
  Cleaning of machined die-casting
• General medium pressure applications
  Cleaning of Mica, Cleaning of printed circuit board drill holes, General water supply, Water feeding to shaft sealing of high pressure pump, Food spraying, Cleaning of sheet pile, Grinding equipment, Welding machine cooling.

Design Data

Design Concept

Material List

Dimensional Charts

Accessories

• Baseplate
• V.Pully
• V.Belt
• Belt cover
• Anchor bolts/nuts

Features

• Flow rate: 0.03-0.5m 3 /min
• Head: 150-650m
• Temperature: 0-120℃
• High efficiency saves electric cost.
• Low noises and vibration.
• Simplicity of pump construction eliminates maintenance.
• No close clearance makes performance stable and reliable.
• Less contact surface makes high mechanical reliability.
• Pulsation free pressure and flow.
• Economical installation.

Applications

• Boiler Feed
  Water supply to low and medium pressure boiler.
• Petroleum-Chemicals
  Gasoline, light hydrocarbon feed stock, propane, ethane and naphtha feed service.
• Reverse Osmosis
  Ultra-pure water supply, Desalination, Waste-water purification, Food concentration, Sea-water distillation, Biomedical.
• Fuel Injection
  Carbon-black manufacturing, Kiln in cement plant, Boiler.

Design Data

Design Concept

Material List

Dimensional Charts

Accessories

• Baseplate
• V.Pully
• V.Belt
• Belt cover
• Anchor bolts/nuts

Manufacturer : Honda Kiko

Model : HRG

Features

• Flow rate: 0.03-0.5m 3 /min
• Head: 150-650m
• Temperature: 0-120℃
• High efficiency saves electric cost.
• Low noises and vibration.
• Simplicity of pump construction eliminates maintenance.
• No close clearance makes performance stable and reliable.
• Less contact surface makes high mechanical reliability.
• Pulsation free pressure and flow.
• Economical installation.

Applications

• Reverse Osmosis
  Ultra-pure water supply, Desalination, Waste-water purification, Food concentration, Sea-water distillation, Biomedical.
• Pulp and Paper mills
  Cleaning of felts, screens and machinery.
• Boiler Feed
  Water supply to low and medium pressure boiler.
• Fuel Injection
  Carbon-black manufacturing, Kiln in cement plant, Boiler.
• Shop machinery and Car Industry
  Cleaning of gun-drilled parts, Hydrostatic equipment,
  Cleaning of machined die-casting.
• General medium pressure applications
  Cleaning Mica, Cleaning of printed circuit board drill holes, General water supply, Water feeding to shaft sealing of high pressure pump, Food spraying, Cleaning of sheet pile, Grinding equipment, Welding machine cooling.

Design Data

Design Concept

Material List

Dimensional Charts

Accessories

• Baseplate
• V.Pully
• V.Belt
• Belt Cover
• Anchor bolts, nuts

Manufacturer : Honda Kiko

Model : FRS/FR

Features

• Flow rate: 0.01 to 0.1m 3 /min
• Head: 10 to 170m
• Temperature: -20 to 80℃
• FRS has small capacity and high head by one impeller.
• Easy inspection of pump interior is capable with just removing a suction cover.
• FRS can be used for a wide range of liquid because of its stainless steel materials.
• High efficiency saves electric cost.

Applications

• Food & Beverage industry
• Water treatment industry
• Chemical industry
• General industry, industry

Design Data

Design Concept

Materials List

Dimensional Charts

Manufacturer : Honda Kiko

Model : BNS/BNF

Features

• Flow rate: 0.05 to 3.9m 3 /min
• Head: 7 to 55m
• Temperature: -20 to 170℃
• BNS/BNF is designed for liquid contains foreign (solid) object, and it can pump up solids that the 1/3 size of suction bore (50~150mm).
• Both Stainless Steel and Cast Iron can be used for the parts contact with liquid.
• Small sized rigid type BNS/BNF has excellent reliability and durability under severe condition.

Applications

• Ball circulators for cleaning condenser tubules at power plants
• Transfer of sludge from water supply and sewage, transfer of crumb (rubber) slurry
• Miscellaneous wastewater and sludge transfer from various industries
• Chemical factories, paper factories, food factories, pharmaceutical factories, textile factories

Design Data

Design Concept

Materials List

Accessories

• Base plate
• Coupling
• Coupling/Cover
• Anchor bolts/Nuts

Dimensional Charts

Manufacturer : Honda Kiko

Model : BLS

Features

• Flow rate: 0.1-4.8m 3 /min
• Head: 8-95m
• Temperature: 0-80℃
• Prevention of Environmental Pollution
• Progress of productivity
• Full-Open type Impeller
• Buffed Casing & Impeller
  Free from dogging and leakage resulting from polymerization (coagulum) of Latex liquid.
  Compared with conventional pumps, BLS does not required frequent overhauling with lower maintenance cost.
  BLS has a low polymerization rate of latex liquid, which is one-thirtieth of conventional pumps.
  It helps maintenance of the original latex quality.
  In addition to transforming chemically stable synthetic latex liquid, BLS can also be used for clog-free transfer of more chemically unstable 750mPa.s-1000mPa.s, and 1400mPa.s natural latex liquids.

Applications

• Transportation of Latex liquid
• Emulsion liquid
• Crumb slurry
• Viscous liquid and Adhesive liquid

Design Data

Design Concept

Materials List

Accessories

• Base Plate
• Coupling
• Guard
• Anchor bolts/nuts
• Drain Plug

Dimensional Charts

Manufacturer : Honda Kiko

Model : GS/GF

Features

• Flow rate: 0.1 to 14m 3 /min
• Head: 7 to 135m
• Temperature: -20 to 170℃
• Foot supported Back-Pull Out construction makes maintenance easy without disturbing motor and piping.
• GS / GF is able to conform to API 610 Standard.
• High efficiency saves electric cost.
• GS / GF, through many years of performance and experience, has excellent reliability and durability.

Applications

• Petro-chemical industries
• Water treating industries
• Chemical industries
• Oil refining industries
• All other sorts of industries

Design Data

Accessories

• Base Plate
• Coupling
• Guard
• Anchor bolts/nuts
• Air-Drain Plug

Design Concept

Materials List

Dimensional Charts

Manufacturer : Honda Kiko

Model : LNPS/LNPF

Features

• Flow rate: 0.05 to 9.0m 3 /min
• Head: 10 to 95m
• Temperature: -20 to 170℃
• Ensures the lowest NPSH = Tough to cavitation.
• Well handling of liquid containing 5~10% AIR or GAS.
• Extremely low NPSH CAN.
  Lower a suction tank close to the pump, thus saving plant constructing cost.
• LNPS / LNPF has excellent reliability and durability under severe condition.

Applications

• Vacuum Evaporator
• Crystallizer
• Liquified Gas Transfer
• Dyeing Machine
• Boiler Feeding
• Condenser Drainage
• Chemical Reactor
• Desalination plant
• Foodstuffs Engineering

Design Data

Accessories

Design Concept

Materials List

Dimensional Charts