Specification

Specification

Specification

Specification

Specification

How to Use

Product features

●This is the joint pipe to connect securely with a high-pressure grout hose to the grout hole of the anchor plate to enables high-level grout injection work.

●Hammer the hose joint pipe into the grout hole in order to fix it securely.

●There is no leakage at the joint part even by high-pressure injection.

Specification

Joint pipe

Grout Hose

How to Use

Product features

● Two-component filler for GC Cap.
● Packed by 500g for easy handling.

Reference for quantity

How to use

Product features

● The clear type of GC cap allows you to visually check the condition of the grip inside the cap and the gap filler.
● Adhesion and flexibility make it easy to attach to the grip.
● LDPE resin (low-density polyethylene) is used as the material. LDPE resin is a translucent material with excellent impact strength, water resistance, cold resistance, and chemical resistance.

Specification

Example of use

Product features

● Used as protection cap for PC single strand.

● Protect the fixing part with resin material with rust prevention.

● Mentioned as standard material by Japan Prestressed concrete contractors association.

● Competitive price and high-cost benefit performance.

● Enable to reduce the working time. (grout immediately after tension work)

● Using with reinforcement ring enables effective work of high-pressure injection.

Specification

Example of use

Product features

● The product made by uretane foam that enable to prevent anchor plate to turn around, also have them stop limewash.

● One sided adhesive that can install anchor plate at the prescribed place.

● Price is very competitive.

● Material： uretane foam

Specification

How to Install

Example of use

Product features

● The sheath seal is a product to stop limewash from Sheath. Compare to vinyl tape or mortar, the Sheath seal is made by sponge which is very right and easy to install. Also, the cost is lower than others.

● Material： Polyethylene foam

Specification

How to Install

Example of use

Product features

● To make efficient work by using tanbu.

● Reduce production cost by mass production.

● Have a wide range of sizes that can allow most of the digits.

Specification

How to install

Application

Product features

● Be able to execute in a short working time.

● Made by high-density resin that can avoid rust.

● The shape of rib can avoid cross-section loss.

● The rib can avoid cross-section loss

Specification

Water cutoff tape for JLForm (Isobutylene-isoprene rubber)

Application

Product features

● Easy to set and remove. No slipping by magnetic jig for an insert that contributes labor-saving. When demolding to the vertical direction, only pull up the product. For demolding to the horizontal direction, remove the anti-slipping pin then pull up.
● Easy maintenance of form panel. Only need to put a 5mm hole on the form panel, and it is easy to repair.
● Easy after treatment. After demolding, remove the HJ magnet jig from the concrete product by using a dedicated jig for the removal. We have a dedicated cap to filling holes as optional.

Specification

How to do setting, How to Use

Product features

● This is to be used as a countermeasure for salt damage as of bridge and other constructions by securing a certain level of a concrete cover, and easy to remove.

● When attaching with insert, the rubber deformed and tightlly connected, and secure a certain level of a concrete cover. The rubber corn is made by a special rubber. It will not remove even after fi lling with mortar.

● When demolding, the rubber form goes back to the original and easy to remove. It can be used continuously so it is an economical product

Specification

How to do setting

How to Use

Product features

● Create a tiny rib at the middle of the threaded part and headed part of the jig in order to use at the side of the form panel.

● It is no need to remove the jig from the form panel when demolding, the shear created by demolding would break a slitted part of the jig.

● It would be possible to attach inserts only at the surface side of the form panel, which enables a one-person work.

Application

Attachment of insert to the place out of reach that unable to either set or remove insert by bolt on form panel.

Specification

How to do setting, How to Use

Product features

● Add a rib at the center of the jig with a small slit in order to apply at the side of the form panel.

● It is no need to remove the jig from the form panel when demolding, the shear created by demolding would break a slitted part of the jig.

● It would be possible to attach inserts only at one side of the form panel, which enables a one-person work

Application

Attachment of insert to the place out of reach that unable to either set or remove insert by bolt on form panel.

Specification

How to do setting, How to Use

Product feature

● Create a thread in A jig cap so that fills the gap of the diameter of the threaded hole of inserts that enables to use with all of the inserts.

Application

Attachment of insert to the place out of reach that unable to either set or remove insert by bolt on form panel.

Specification

How to do setting, How to Use

Product features

● Use magnet to attach inserts with form panel so that can avoid using bolts that let reduce the labor of drive screws which enable the drastically reduce the labor cost.

● This may be able to avoid the risk of a worker going into the back and below of the form panel.

● Deterioration of magnet is not so mush and the yoke is also solid and strong that enable to use for semi-permanently.

Specification

How to do setting, How to Use

Product features

● Enable the easy connection of hume pipe and pile with form panel.

● The product is matched especially to a form panel that has many mounting locations by shortening a mounting time and loss prevention of bolt and nut.

● The replacement of components is available.

Specification

How to do setting, How to Use

Product features

● This is to make the concrete cover.

● Please use double-sided tape when you would like to set inserts without making a hole on the form panel.

Specification

How to do setting, How to Use

Product features

● This is the one to enable an insert to be set to the composite panel which can not directly fix by the bolt.

● It enables to avoid making a big hole on a panel when putting insert.

● It enables to avoid making a big hole on a panel when

Specification

How to do setting, How to Use

Product features

● Is able to work only by one person instead of two, which enables to reduce the cost of the workforce.

● The worker can handle the product easily that the work efficiency increases a lot.

● It is able to be installed in an area that is difficult to use bolts.

Specification

How to do setting, How to Use

Product features

● This is the one to enable an insert to be set to the composite panel which can not directly fix by the bolt.

● Enable to remain the surface of insert (screw part) by the same level with the concrete surface.

● Hole filling type can fill the holes that used to drill on form panel.

Specification

How to do setting, How to Use

Product features

● In general, we use tapping to set duct sleeves. But this way, we needed to do the tapping whenever the place of the duct sleeve change which made the composite panel many holes. It leads the durability of composite panels shorter. CBM jig can solve the issues and it also is able to avoid making holes on a composite panels.

● It is able to use for an Electrical box/Sleeve. (for construction).

Specification

How to do setting, How to Use

Product features

● This is to use as the attachment of a fine ceramic insert.

Specification

How to do setting, How to Use

Product features

● When using a general bolt to do the setting, normally need to make a hole of the size more than the bolt but by using a C jig, we only need to make a hole with a small size.

●The surface of the insert thread will be the same with the concrete surface.

Specification

How to do setting, How to Use

Product features

● When using a general bolt to do the setting, normally need to make a hole of the size more than the bolt but by using a B jig, we only need to make a hole with a small size that can minimize the damage on the mold.

● This is the one to pull in the thread of insert from the concrete surface

Specification

How to do setting, How to Use

Product features

● During the setting of an insert with a mold, when a bolt cannot directly connect, this is the one to use.

● This can provide a gap from the surface of the insert thread to the concrete surface.

Specification

How to do setting, How to Use

Product features

● No need to weld, only hook with bar arrangement with one-touch hook.

● Using high strength material with comparatively lower price.

● This is zinc plated steel wire

Specification

Applicable weight (When demolding)

Warning

Please read the user manual carefully and be sure to use it safely.

Please do an inspection of the hunger regularlly.

How to Use, Example of Use

Product features

● Lifting product that connects eye nut with the high tensile bolt.

● The deficit part of the threaded part has been removed which enhances the strength.

● Be able to choose the length of S from below.

● It is not possible to lift from the side.

Specification

Warning

Please read the user manual carefully and be sure to use it safely.

Please do an inspection of the hunger regularlly.

How to Use, Example of Use

Product features

● Pull-in Bracket for a rated load of 10tons.

● Please fill inserts previously and fix with bolt.

● The hole for bolts is after the process that it can be available to use all sizes up to M24.

● Application: Be able to use as lifting hardware. (Rated load is below 5tons per pc)

Specification

(Unit：㎜)

Finish: HDZ-55 (Hot-dip galvanizing)

Warning

Please read the user manual carefully and be sure to use it safely.

Please do an inspection of the hunger regularly.

How to Use, Example of Use

Product features

●This is the jig that specially designed for horizontal hunging.
●Rated load is below 4tons (a set of two)
●It is low cost and has high safety

Specification

(Unit：㎜)

・Finish: Unichrome
・Rated load is based on the assumption of using high-strength bolt.
◎ For standard inventory

Warning

Please read the user manual carefully and be sure to use it safely.

Please do an inspection of the hunger regularly.

How to Use, Example of Use

Product features

● Hanging direction is free and the product has designed to be able to use repeatedly.

Specification

・Please use a high-strength bolt for attachment.

Example of Use

Product features

● Lifting system that can rotate 360 degrees.

Specification

Warning

Since the G Hunger is consumable goods, please be careful to the below and replace the goods frequently.

1. Please make sure to follow the available range.
2. Please make sure to follow maximum loads.
3. Please make sure that the hanging ring placed vertically to its origin.
4. Please make sure the bolt strength is F10T, a minimum of 8.8.
5. For M12(GH-0.7), please make sure to use round washer.

Inspection of G Hunger
Please inspect G Hunger before use. If you fi nd any issue during the inspection, please stop using and replace with new one.

Check items
1. Please check if any shape defect, bending error, crack, scratch, rust or not. It is not possible to repair the G Hunder itself.
2. Please check if the bolt has bending error, shape defect, crack, etc., or not.

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Urethane Former
This is the former made by a special polymer that has high peelability and durability The shape of the former specially designed to prevent edge chipping.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Metal Former
It is a durable Metal Former.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases efficiency of operation.

・Considering post-process: Anchor designed to be embedded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to a competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Free Former (Rubber)
When removing the form by sliding to cross direction, the bolt prevents the form to remove. The D-Lift Free Former let the bolt remove that enable the form removal by sliding

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases efficiency of operation.

・Considering post-process: Anchor designed to be embedded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to a competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Rubber Former
By fixing standard rubber former and D-Lift Anchor with form panel to create hemispherical shaped hollow on the concrete surface which enable them to coupling with D-Lift Coupler. D-Lift Former consist of element, butterfly bolt and nut.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Anchor
Applying high durability material and shape that enable to avoid the head of anchor to stick out from concrete surface. We have product line up of the rated load from 1.3tons up to 22tons.

Specification

Unit: mm

Mounting Methods

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Coupler
The coupler part securely hold the head of D-Lift Anchor embedded into a concrete product. The ring part has flexibility so that it can be compatible with all of the lifting angles. Please do the regular inspection for repeated use.

Specification

Unit: mm

Mounting Methods

Product overview and features

● System developed for the transport of concrete products.

● There is no anchor projection on the surface of concrete, so that it is able to set at the narrow place. Also can be used with thin type concrete. Product line up includes a wide variety of anchors.

● A series can be applicable to a wide range of loads so that it is no need to own many lifting products.

● Easy handling help to increase a work efficiency. Lifting angle can be chosen freely and the safety has considered at suffi cient level.

● When locating concrete products at the stockyard, please use a lift seal to prevent waterfall into the head of the lifting anchor, also to prevent freezing.

■ Components for the System

● Ring Clutch: Dedicated jig for lifting (5 types as per loads)

● Lift Anchor: Embedded Anchor, 0.7 to 26tons

● Recess Former: Jig used with form panel to connect anchor(5types as per loads)

● Former Bolt: Bolt for connecting recess former. (w/One-touch-type)

● Former Plate: Jig for connecting recess former (for form panel, for demolding)

Mounting Methods  

Example of Use

Lifting Anchor System specification table

Ring Clutch

(Unit：㎜)

Standard of installation parts

(Unit：㎜)

＊1.25ton series has no b type, 26.0tons series: a type=M16, b type=M12

Lifting Anchor specifi cation table（Material: SM490A）