JTEKT | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Sun, 11 Oct 2020 14:07:11 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.5 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png JTEKT | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 JTEKT KF Series Drive Shaft For Steel Production/ Industrial Equipment https://koueitrading.com/global/product/jtekt-kf-series-drive-shaft-for-steel-production-industrial-equipment/ Mon, 22 Oct 2018 02:44:36 +0000 https://koueitrading.com/global/?post_type=product&p=4998 Product Made in Japan Manufacturer: JTEKT Model: KF Series Round Type (UJ) – Boltless Type Features This cost-efficient series is intended for light to medium duty applications. – Characteristics (1) UJ swing diameter (mm) : 105-180 (2) Torque TD (kN ・m) :1.56 – 9.89 (3) Torque TS (kN ・m) : 4.13 – 36.2 (4)  Maximum operating […]

The post JTEKT KF Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: JTEKT
Model: KF Series

Round Type (UJ) – Boltless Type

Features

This cost-efficient series is intended for light to medium duty applications.

–

Characteristics

(1) UJ swing diameter (mm) : 105-180
(2) Torque TD (kN ・m) :1.56 – 9.89
(3) Torque TS (kN ・m) : 4.13 – 36.2
(4)  Maximum operating angle ( °) : 18 – 30
–

Parts

1) Cross & bearings
The cross & bearings are the most critical components of a drive shaft.
A cross & bearing has a cross-shaped shaft and four rolling bearings that individually support each end of the shaft.
2) Bearing set bolt
Used to connect the cross bearing and its mating part.
3) Spline sleeve/shaft
There are a spline hole and shaft and the attaching length is adjustable.
4) Spline cover
Used to improve the dustproof and waterproof properties if the ambient environment is not good.
5) Flange yoke
The flange yoke is commonly used to connect a drive unit such as a motor). A variety of joints are available to suit pecifically desired applications
6) Fitting
Used mainly for connection with the machine and the motor. Various types of coupling arrangements are provided according to the application.

 

Specifications

 

The post JTEKT KF Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> JTEKT EZ Series Drive Shaft For Steel Production/ Industrial Equipment https://koueitrading.com/global/product/jtekt-ez-series-drive-shaft-for-steel-production-industrial-equipment/ Mon, 22 Oct 2018 02:39:54 +0000 https://koueitrading.com/global/?post_type=product&p=4995 Product Made in Japan Manufacturer: JTEKT Model: EZ Series Round Type (UJ) – Bolt Type Features Series for heavy load with excellent balance between performance and price. – Characteristics (1) UJ swing diameter (mm) : 225 – 435 (2) Torque TD (kN ・m) :19.5 – 149.2 (3) Torque TS (kN ・m) : 71.4 – 546 (4)  Maximum operating […]

The post JTEKT EZ Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: JTEKT
Model: EZ Series

Round Type (UJ) – Bolt Type

Features

Series for heavy load with excellent balance between performance and price.

–

Characteristics

(1) UJ swing diameter (mm) : 225 – 435
(2) Torque TD (kN ・m) :19.5 – 149.2
(3) Torque TS (kN ・m) : 71.4 – 546
(4)  Maximum operating angle ( °) : 15
–

Parts

1) Cross & bearings
The cross & bearings are the most critical components of a drive shaft.
A cross & bearing has a cross-shaped shaft and four rolling bearings that individually support each end of the shaft.
2) Bearing set bolt
Used to connect the cross bearing and its mating part.
3) Spline sleeve/shaft
There are a spline hole and shaft and the attaching length is adjustable.
4) Spline cover
Used to improve the dustproof and waterproof properties if the ambient environment is not good.
5) Flange yoke
The flange yoke is commonly used to connect a drive unit such as a motor). A variety of joints are available to suit pecifically desired applications
6) Fitting
Used mainly for connection with the machine and the motor. Various types of coupling arrangements are provided according to the application.

 

Specifications

 

The post JTEKT EZ Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> JTEKT T Series Drive Shaft For Steel Production/ Industrial Equipment https://koueitrading.com/global/product/jtekt-t-series-drive-shaft-for-steel-production-industrial-equipment/ Mon, 22 Oct 2018 02:30:13 +0000 https://koueitrading.com/global/?post_type=product&p=4991 Product Made in Japan Manufacturer: JTEKT Model: T Series Block Type (UJ) Features ⦁ These series are intended for use in extremely heavy duty applications. ⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills. – Characteristics (1) UJ swing diameter (mm) : 160 – 1230 (2) […]

The post JTEKT T Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: JTEKT
Model: T Series

Block Type (UJ)

Features

⦁ These series are intended for use in extremely heavy duty applications.
⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills.

–

Characteristics

(1) UJ swing diameter (mm) : 160 – 1230
(2) Torque TD (kN ・m) : 10.9 – 8970
(3) Torque TS (kN ・m) : 34.1 – 18800
(4)  Maximum operating angle ( °) : 4 – 10
–

Parts

1) Cross & bearings
The cross & bearings are the most critical components of a drive shaft.
A cross & bearing has a cross-shaped shaft and four rolling bearings that individually support each end of the shaft.
2) Bearing set bolt
Used to connect the cross bearing and its mating part.
3) Spline sleeve/shaft
There are a spline hole and shaft and the attaching length is adjustable.
4) Spline cover
Used to improve the dustproof and waterproof properties if the ambient environment is not good.
5) Flange yoke
The flange yoke is commonly used to connect a drive unit such as a motor). A variety of joints are available to suit pecifically desired applications
6) Fitting
Used mainly for connection with the machine and the motor. Various types of coupling arrangements are provided according to the application.

 

Specifications

 

The post JTEKT T Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> JTEKT U Series Drive Shaft For Steel Production/ Industrial Equipment https://koueitrading.com/global/product/jtekt-u-series-drive-shaft-for-steel-production-industrial-equipment/ Mon, 22 Oct 2018 02:20:53 +0000 https://koueitrading.com/global/?post_type=product&p=4987 Product Made in Japan Manufacturer: JTEKT Model: U Series Block Type (UJ) Features ⦁ These series are intended for use in extremely heavy duty applications. ⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills. – Characteristics (1) UJ swing diameter (mm) : 160 – 1230 (2) […]

The post JTEKT U Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: JTEKT
Model: U Series

Block Type (UJ)

Features

⦁ These series are intended for use in extremely heavy duty applications.
⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills.

–

Characteristics

(1) UJ swing diameter (mm) : 160 – 1230
(2) Torque TD (kN ・m) : 10.9 – 8970
(3) Torque TS (kN ・m) : 34.1 – 18800
(4)  Maximum operating angle ( °) : 4 – 10
–

Parts

1) Cross & bearings
The cross & bearings are the most critical components of a drive shaft.
A cross & bearing has a cross-shaped shaft and four rolling bearings that individually support each end of the shaft.
2) Bearing set bolt
Used to connect the cross bearing and its mating part.
3) Spline sleeve/shaft
There are a spline hole and shaft and the attaching length is adjustable.
4) Spline cover
Used to improve the dustproof and waterproof properties if the ambient environment is not good.
5) Flange yoke
The flange yoke is commonly used to connect a drive unit such as a motor). A variety of joints are available to suit pecifically desired applications
6) Fitting
Used mainly for connection with the machine and the motor. Various types of coupling arrangements are provided according to the application.

 

Specifications

The post JTEKT U Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> JTEKT D Series Drive Shaft For Steel Production/ Industrial Equipment https://koueitrading.com/global/product/jtekt-d-series-drive-shaft-for-steel-production-industrial-equipment/ Sat, 20 Oct 2018 05:16:39 +0000 https://koueitrading.com/global/?post_type=product&p=4980 Product Made in Japan Manufacturer: JTEKT Model: D Series Block Type (UJ) Features ⦁ These series are intended for use in extremely heavy duty applications. ⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills. – Characteristics (1) UJ swing diameter (mm) : 160 – 1230 (2) […]

The post JTEKT D Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: JTEKT
Model: D Series

Block Type (UJ)

Features

⦁ These series are intended for use in extremely heavy duty applications.
⦁ High dust resistance makes these series optimal for use under severe operating conditions such as in rolling mills.

–

Characteristics

(1) UJ swing diameter (mm) : 160 – 1230
(2) Torque TD (kN ・m) : 10.9 – 8970
(3) Torque TS (kN ・m) : 34.1 – 18800
(4)  Maximum operating angle ( °) : 4 – 10
–

Parts

1) Cross & bearings
The cross & bearings are the most critical components of a drive shaft.
A cross & bearing has a cross-shaped shaft and four rolling bearings that individually support each end of the shaft.
2) Bearing set bolt
Used to connect the cross bearing and its mating part.
3) Spline sleeve/shaft
There are a spline hole and shaft and the attaching length is adjustable.
4) Spline cover
Used to improve the dustproof and waterproof properties if the ambient environment is not good.
5) Flange yoke
The flange yoke is commonly used to connect a drive unit such as a motor). A variety of joints are available to suit pecifically desired applications
6) Fitting
Used mainly for connection with the machine and the motor. Various types of coupling arrangements are provided according to the application.

 

Specifications

 

The post JTEKT D Series Drive Shaft For Steel Production/ Industrial Equipment first appeared on Kouei Japan Trading | Get Quotation.]]>