RL-204-5

RL-207-4 [RL-4]

RL-40

Specifications

Specifications

	Diagram of shaft position and rotation direction
KS-3-4
KS-3-5
PK-3-4
KS-3-5
PK-3.5 (2)

Specifications

Specifications

Diagram of shaft position and rotation direction

Turn straight to the right
Transition rotation on both axes

[Type B] Assembly type

Type B is bottom mount type and can be installed inside the fuselage.

Zero return zero, push button reset, type S-BF4/5/6 are available to suit your application.

[S-Type] Control Panel

Easy and convenient to install with clamp type.

Non-return, push-button reset, S-SF4/5/6 types are available to suit your application.

[Type C] Type with pedestal

Type C is a stand type, can change the angle at will, so it is very convenient.

Non-return, push-button reset, S-CF4/5/6 models are available for your choice.

[P-Type] Panel screw type

Type P is a panel mount type and can be surface mounted with the panel bracket.

Non-return, push-button reset, S-PF4/5/6 types are available to suit your application.

Characteristic

• The EMP-600 is a low cost, high performance single-stage pre-set electromagnetic counter.
• Its compact size (55×55mm panel cut) and light weight make it ideal for centralized installation and centralized control.
• Arbitrary settings can be done very easily.
• MP-600 can be used for direct input AC100V/AC200V despite its small size.

Specifications

• Power supply:
  AC: AC100V AC200V
  DC: DC 12V DC24V
• Power Consumption: Approx. 3.75W (AC) Approx. 4.0W (DC)
• Quantity: 10 CPS (AC 25CPS (DC)
• Number of digits: 6 digits
• Reset method (to 0) Push button
• Output contact capacity AC-220V 1A or less
• Weight: Approx. 260g

The LCD screen of the machine has rows of 6 digits arranged on top of each other. The upper display line has a character height of 7 mm and indicates the count value and the lower display line has a character height of 4 mm and indicates the preset. It performs the counting of additions or subtractions from a preset, and when the addition reaches the preset or the subtraction reaches 0, the output relay is activated.

Uses

• Control and counting batches
• Measure length, control packing line

Characteristic

• Easy operation
• Decimal point position adjustable (up to 3 points)
• Six programmable keys for each digit and a manual reset key are located on the front panel.
  User configurable reset to zero (plus) or preset (minus)
  – Front panel keys can be turned on and off externally
• By using the included sealing gasket, the front panel conforms to IP65 waterproof and dustproof performance. The built-in replaceable lithium battery allows the relay to operate at 20℃ for up to 10 years or 10℃.
• Rated relay contact 8A, programmable to NO or NC

This versatile counter has BRISCAL functionality and can be configured for quadrature or unidirectional input, dual presets or single presets with batch presets. The count is displayed in the top row and the preset (or batch preset) is displayed in the bottom row.

Uses

Batch counting and control

Characteristic

• Menu display for easy programming
  Super twisted LCD display for easy viewing from any angle
• Backlight can be programmed to ON, OFF or AUTO
• Data retention for 40 years without power supply
• The position of the decimal point can be set up to 3 places.
• 2 programmable presets
• Multiple pre-scaling functions
• 12VDC output for sensor triggering (when using AC power)
  85~265VAC or 10~26VDC for worldwide use
  2 output relays with 5A rated contacts

7111

Total/subtract counter (bidirectional)

7111QUAD

Total counter compatible with phase difference input

7111HV

Total/subtract counter (2-way) compatible with voltage input

Uses

• Replace electromagnetic counter
• Applications in environments where an external power source is difficult to purchase Applications that measure position, length, rotation and distance
  number of events

Characteristic

• About 10 years battery life with the latest CMOS circuit
• Equipped with screw terminals for connection (all models)
• 9mm . high contrast black character LCD display
• Backlight (external power supply) 5VDC
• Counting function up to 10kHz (7111)
  The 7111QUAD version allows addition/subtraction counting along with forward/backward motion without undercounting or false counting due to the 7111HV out-of-phase signal
  accepting any voltage input within 10 -240VAC or 5-110VDC ±10% Reed or open collector counter input (model 7111)
• The mounting method can be selected using the included front bezel or rear mounting clamp.
• Front panel meets IP65 . dust and water resistance
• Easy installation All models have a rear screw connection port for quick and easy connection

Specifications

• Battery: Lithium battery (non-replaceable), expected life is 10 years at 20°C
• Display: Black 8-character LCD, 9mm character height, zero sub, 5VDC external voltage for power backlight.
• Decimal point position setting (up to 3 places, jumba link setting). Access range: forward from 99999999
• Connecting Screw Terminals (wires up to 1.5mm²)
• Operating temperature: -10℃~+60℃
• Storage temperature -20℃~+60℃
• Humidity: 80% or less at 31°C, 50% or less at 40°C
• Dust and water resistant IP65/NE MA4X Mounting: Use the supplied screws or bezel clips
• Support manual reset Configured by jump link
• Weight: 62g

Is a compact type digital thickness gauge that can easily measure product thickness.

Control button

(1) Power ON/OFF button
(Press to switch between ON and OFF)

(2) Millimeter/inch conversion button
(Press to switch between mm and inch conversion display.)

(3) Set button to 0
(Press button in any position to set to 0)

Specifications

• Minimum reading position: 0.01mm
• Operating temperature environment: 0~+40℃
• Measuring range: 0-15mm
• Storage temperature: 10℃~+60℃
• Accuracy: 0.03mm or less
• Storage humidity: 80% or less
• Measuring depth: 35mm
• Battery voltage: 1.55V (SR44)
• Battery life 8 to 12 months with normal use

Function

(1) Set position 0

(2) millimeter/inch conversion conversion

Replace batteries

Press the battery holder button on the back of the main unit, turn it clockwise, remove the button, and replace the battery.

After installing the battery, press the button and rotate it to the left to fix it.

The Rubber and Plastic Hardness Tester is a spring-loaded durometer (hardness tester) used to measure the hardness of rubber and plastic products such as tires, sponges and felt with extreme accuracy. It conforms to JIS and international standards, and allows easy and fast measurement.

The P-type counter is a counter that uses plastic for the purpose of reducing weight. The hand-held counter weighs about 36 g, the table-mounted counter weighs about 67 g and the 5 consecutive counter weighs about 230 g, which is less than half the weight of a conventional counter. The specifications and types of equipment are the same as for conventional products. (Product made to order).

Is an accumulator used mainly for surveying personnel and supplies. A new lightweight P-type with plastic specifications has also been added to the lineup.

H-102 . Handheld Counter

Hand-held total counters are total machines that can be held in the hand, with single and dual types. The single device weighs about 60g, is light and compact. A double category is a combination of two single types and can be used to aggregate items. Chrome finish, joint weight about 140g.

H-102B . desktop counter

Used by combining a hand-held cash register with a stand and fixed to the counter at the door or against the wall.

Chrome plated, weight about 80g

Serial counter H-102M

An 8-row counter is a combination of a 2- to 8-row counter and a 10-row counter. When more detailed information is needed, quantities can be grouped into individual items, and reset all machines with the knob on the side.

Features

A fixed contact point can be attached to a standard ratchet counter to switch on a buzzer, lamp, etc. when a certain number is reached. Contact 90 means that when the count reaches 90, the switch inside the counter is turned on (ON) and when it reaches 100, the switch is turned off (OFF). This process is repeated. Contact 90 is a counter that cannot be used to count 100 units.

Specifications

Features

The record counter is used to measure the number of revolutions of a rotating shaft in general machinery as a portable device. The attached attachment can be attached to the end of the counter, and by replacing the attachment, both right and left rotations can be freely measured. Each revolution advances the number by one digit.

H-100-5

Specifications

Specifications

LB-219-4

LB-907

LB-606-5

Specifications

A: Standard product B: Lot production C: Made-to-order product

LB-204-5

LB-207-5 [LB-5]

LBL-207-5 [LB-5(3)]

LB-40

Specifications

RS-303-4

RS-907

RS-606-5

Specifications

RS-204-5

RS-207-5 [RS-5]

RS-207-5 [RS-5 (3)]

RS-50

Specifications