Features

• It distribute a fluid and can see the flow, too.
• It can distribute a fluid between each branch pipe.
• It can produce it from a distribution branch pipe of two to 11 from a distribution branch pipe.
• It can confirm fluid flow by viewing.
• With the flow quantity adjustment valve using the indication red line of the taper transparence pipe as an indication the position of the ball.
• It can adjust the valve of each branch pipe while seeing it.
• With the flow switch, it detect fluid flow and let it is ON, or a switch be off with flow quantity of the designation.
• ※The switch is rigid (the set point change from a trace is not possible)
• ※In the case of an order, an estimate □Please appoint the inside of this.

• An example: Kind ISOVG32 of the operation flow quantity 0.3L/min oil of the flow quantity 1L switch of each 8FITVM-Rc1/8-OFF branch pipe
• ※The point of contact method, please appoint OFF method or ON method.
• When OFF method, fluid does not flow; the point of contact is OFF.
• When ON method, fluid does not flow; the point of contact is ON.

Standard specifications (FITV part) 

Standard specifications (flow switch part) 

Flow switch precautions 

Features

It distribute a fluid and can see the flow, too.
It can distribute a fluid between each branch pipe.
It can produce it from a distribution branch pipe of two to 14 from a distribution branch pipe.
It can confirm fluid flow by viewing.
With flow quantity adjustment valve, using the indication red line of the taper transparence pipe as an indication the position of the ball.
It can adjust the valve of each branch pipe while seeing it.
※In the case of an order, an estimate □Please appoint the inside of this.

An example: Kind ISOVG32 of the flow quantity 1L oil of each 8FITV-Rc1/8 branch pipe

Features

• It shows flow quantity by viewing because use a transparent taper pipe, with a ball (or a float) and the indication red line.
• It can confirm approximate flow quantity by looking at the position concerned.
• The installation direction does not matter.
• The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

• In the case of an order, an estimate □Please appoint the inside of this.

Features

It can see a flow at first sight.
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
It cannot confirm the flow quantity.
The installation direction does not matter.
The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

※Supplement about the model 

The model in case of the R screw is MK25- a connection entrance exit □It becomes TOA.  An example: MK25-3TOA
The model in case of the R screw is MK25- a connection entrance □It becomes TOMA.     An example: MK25-3TOMA
The model in case of the R screw is MK25- a connection exit □It becomes TMOA.     An example: MK25-3TMOA

Standard specifications 

Features

• It can see a flow at first sight.
• It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
• It cannot confirm the flow quantity.
• The installation direction does not matter.
• The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

※Supplement about the model 

• The model in case of the R screw is MK25- a connection entrance exit □It becomes TOW.  An example: MK25-3TOW
• The model in case of the R screw is MK25- a connection entrance □It becomes TOMW.      An example: MK25-3TOMW
• The model in case of the R screw is MK25- a connection exit □It becomes TMOW.      An example: MK25-3TMOW

Standard specifications 

Features

• A switch is with flow quantity.
• It detect fluid flow and let it is ON, or a switch be off with flow quantity of the designation. ※The switch is rigid (the set point change from a trace is not possible).
• It can see a flow at first sight. It is a rheoscope confirming fluid flow by the movement of transparent floats in the jurisdiction.
• With protective cover, by a metal protective cover possibility of the damage by shocks from the outside. It reduce it.
• The installation direction does not matter. The posture when I attach it because it use a spring inside.
• It look up and look down and can perform sideways-facing freely.

• In the case of an order, an estimate □Please appoint the inside of this.

• An example: Operation flow quantity 1L/min of the MKCM20-2TW-OFF switch
• ※The point of contact method, please appoint OFF method or ON method.
• When OFF method, fluid does not flow; the point of contact OFF (the normal opening A point of contact)
• When ON method, fluid does not flow; the point of contact ON (the normal closing B point of contact)

Standard specifications 

Flow switch precautions 

1. Attention in the magnetic influence 

• Please use the lead switch for a switch acting with magnetism at the place that is not affected by the magnetic field.
• When magnetic bodies such as the iron exist in the vicinity of the lead switch, it causes the malfunction.

2. Attention in the electrical connection

Features

• It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line.
• It can confirm approximate flow quantity by looking at the position concerned.
• With flow quantity adjustment valve by adjusting a miniature valve, putting balls together at the position of the indication red line.
• Setting of the necessary flow quantity is possible.
• With protective cover, by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
• The installation direction does not matter.
• The posture when I attach it as I use a spring inside looks up and is downward  and it can perform sideways-facing freely.

• In the case of an order, an estimate □Please appoint the inside of this.

Features

• It shows flow quantity by viewing, because use a transparent taper pipe, with a ball (or a float) and the indication red line.
• It can confirm approximate flow quantity by looking at the position concerned.
• With protective cover, by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
• The installation direction does not matter because use a spring inside, the posture when attach it looks up and look down; and it can perform sideways-facing freely.

List of models 

• In the case of an order, an estimate □Please appoint the inside of this.

Features

It can see a flow at first sight.
It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction.
It cannot confirm the flow quantity.
With protective cover, by a metal protective cover, I reduce possibility of the damage by shocks from the outside.
The installation direction does not matter because it use a spring inside, the posture when it attach it looks up and looks down and can perform sideways-facing freely.

List of models 

※Supplement about the model 

• The model in case of the R screw is MKC a connection entrance exit □* -□It becomes TOW.  An example: MKC20-3TOW
• The model in case of the R screw is MKC a connection entrance □* -□It becomes TOMW.     An example: MKC20-3TOMW
• The model in case of the R screw is MKC a connection exit □* -□It becomes TMOW.     An example: MKC20-3TMOW

Standard specifications 

Features

• It can see a flow at first sight. It is a rheoscope confirming fluid flow by the movement of transparent balls (or a float) in the jurisdiction. It cannot confirm the flow quantity.
• With protective cover, by a metal protective cover, it reduce possibility of the damage by shocks from the outside.
• The installation direction does not matter.
• The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

※Supplement about the model 

• The model in case of the R screw is MKC a connection entrance exit □* -□It becomes TOL.   An example: MKC20-3TOL
• The model in case of the R screw is MKC a connection entrance □* -□It becomes TOML.      An example: MKC20-3TOML
• The model in case of the R screw is MKC a connection exit □* -□It becomes TMOL.      An example: MKC20-3TMOL

Standard specifications (protest a form) 

Standard specifications (for the copper pipe) 

Features

• It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line. It can confirm approximate flow quantity by looking at the position concerned.
• With flow quantity adjustment valve, by adjusting a miniature valve a ball (or a float) at the position of the indication red line. Setting of the flow quantity that is necessary by putting it together is possible.
• With protective cover, by a metal protective cover, it reduce possibility of the damage by shocks from the outside.
• The installation direction does not matter. The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

• In the case of an order, an estimate □Please appoint the inside of this.

• An example: Kind ISOVG32 common use flow quantity 3L/min of the MKCTV20-2TL oil
• ※The model in case of the connection R screw is MKCTV20- □It becomes TOL. An example: MKCTV20-3TOL

Standard specifications (protest a form) 

Standard specifications (for the copper pipe) 

Features

• Flow rate at a glance.Because a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relative position of the ball (or float) and the red line indicated.
• The orientation of the installation is not important. Because a spring is used inside, the installation position can be freely adjusted, such as upward, downward, or sideways.

• Please specify the details in the box when ordering or requesting a quote.

• Example: MKT25-2TL Oil type: ISOVG32 Normal flow rate: 3L/min

Additional information about models:

• If the connection inlet and outlet are R male threads, the model number is MKT□□-□TOL. Example: MKT25-3TOL
• If the connection inlet and outlet are R male threads, the model number is MKT□□-□TOML. Example: MKT25-3TOML
• If the connection outlet and outlet are R male threads, the model number is MKT□□-□TMOL. Example: MKT25-3TMOL

Standard Specifications (screw-in type)

Standard Specifications (for copper pipes) 

Features

• Type for exclusive use of the slowdown machine.
• It can confirm a flow of the oil by being attached to a slowdown machine.
• It cannot confirm the flow quantity.

Standard specifications 

Features

• Type for exclusive use of the copper pipe
• It is a rheoscope confirming a flow of the oil.
• In the case of a slowdown machine, please choose MKK25-8-P.

List of models 

Standard specifications 

Features

• It shows flow quantity by viewing. Because use a transparent taper pipe, with a ball (or a float) and the indication red line. It can confirm approximate flow quantity by looking at the position concerned.
• With protective cover, by a metal protective cover, it reduce possibility of the damage by shocks from the outside.
• The installation direction does not matter. The posture when attach it as use a spring inside looks up and look down; and it can perform sideways-facing freely.

List of models 

• In the case of an order, an estimate □Please appoint the inside of this.

• An example: Kind ISOVG32 common use flow quantity 3L/min of the MKCT20-2TL oil

※Supplement about the model:

• The model in case of the R screw is MKCT a connection entrance exit □* -□It becomes TOL. An example: MKCT20-3TOL
• The model in case of the R screw is MKCT a connection entrance □* -□It becomes TOML. An example: MKCT20-3TOML
• The model in case of the R screw is MKCT a connection exit □* -□It becomes TMOL. An example: MKCT20-3TMOL

Standard specifications (protest a form) 

Standard specifications (for the copper pipe) 

Features

• Distributes fluid and allows you to see the flow
• Distributes fluid to each branch pipe. Manufacturers can produce the item with anywhere from 2 to 11 distribution branches. Visually check the flow of fluid.
• With flow adjustment valve. You can adjust the valve of each branch pipe while watching the ball position using the red line displayed on the tapered transparent pipe as a guide.
• With flow switch. Detects the flow of fluid and turns the switch ON or OFF at the specified flow rate.
• The setting value of the switch is fixed and cannot be changed later.

Standard specifications (FITV section)

Features

• Distributes fluid and allows you to see the flow. Distributes fluid to each branch pipe.
• You can manufacture it with 2 to 14 distribution branches.
• Allows you to visually check the flow of fluid.
• You can adjust the valve of each branch pipe while watching the ball position, using the red line on the tapered transparent pipe with a flow adjustment valve as a guide.

Features of MKC Type

• You can see the flow at a glance This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
• The flow rate cannot be confirmed.
• Comes with a protective cover
• The metal protective cover reduces the possibility of damage due to external impacts.
• Installation orientation is not important Since a spring is used inside, the orientation when installing can be freely adjusted, such as upward, downward, or sideways.

Model list

Features

Flow is visible at a glance This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
The flow rate cannot be confirmed. Can be installed in any direction
Since it uses a spring inside, it can be installed facing up, down, sideways, etc.

Model list

Features

• A transparent tapered tube is used, which allows the flow rate to be visually checked, so the approximate flow rate can be confirmed by looking at the relative position of the ball (or float) and the red line.
• With flow control valve.
• The required flow rate can be set by adjusting the miniature valve to align the ball with the red line . With protective cover.
• The metal protective cover reduces the possibility of damage from external impacts. No installation orientation restrictions are imposed.
• A spring is used inside, so the installation orientation can be freely adjusted, such as upward, downward, or sideways.

Model list

Standard Specifications

Features of MKCT Type

• A transparent tapered tube is used, so the flow rate can be checked by looking at the relative position of the ball (or float) and the red line.
• With protective cover
• The metal protective cover reduces the possibility of damage from external impacts.
• No need to worry about the installation direction.
• A spring is used inside, so the installation direction can be freely changed, such as upward, downward, or sideways.

Model List

Standard Specifications

Features

• A transparent tapered tube is used, so the flow rate can be checked by looking at the relative position of the ball (or float) and the red line.
• The required flow rate can be set by adjusting the miniature valve with flow control valve and aligning the ball with the red line .
• No matter the installation direction.. A spring is used inside, so the installation

Model list

Standard Specifications

Features

• With flow switch
• Detects the flow of fluid and turns the switch ON or OFF at the specified flow rate.
• The switch remains fixed, so you cannot change the setting later. You can easily see the flow at a glance.A flow detector that checks the flow of fluid by the movement of a float inside a transparent tube.
• With protective cover
• The metal protective cover reduces the possibility of damage from external impacts.
• You don’t need to follow any specific installation orientation. Thanks to the internal spring, you can freely adjust the installation orientation, whether it’s upward, downward, or sideways.

Features

• The transparent tapered tube allows you to see the flow rate at a glance, so you can check the approximate flow rate by looking at the relative position of the ball (or float) and the red line.
• The installation direction is not important.
• The spring is used inside, so the installation direction can be freely changed, such as upward, downward, or sideways.
• *The standard specification flow rate is a guideline. Please be sure to let us know the actual flow rate you will be using.

Features

• Flow is visible at a glance This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
• The flow rate cannot be confirmed. The metal protective cover reduces the possibility of damage caused by external impacts.
• Since it uses a spring inside, it can be installed facing up, down, sideways,etc.

Features

• You can see the flow at a glance
• This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
• The flow rate cannot be confirmed. The installation direction does not matter
• Since a spring is used inside, the orientation when installing can be freely set, such as upward, downward, or sideways.

Model list

Features

• A transparent tapered tube is used, which allows the flow rate to be visually checked, so the approximate flow rate can be confirmed by looking at the relative position of the ball (or float) and the red line.
• With flow control valve. The required flow rate can be set by adjusting the miniature valve to align the ball with the red line .
• With protective cover   The metal protective cover reduces the possibility of damage from external impacts. No installation orientation restrictions are imposed   .
• A spring is used inside, so the installation orientation   can be freely adjusted, such as upward, downward, or sideways.

Models List

Model	Dimensions (mm)  [ The overall width is the casting surface, so there may be individual differences in dimensions]				Standard specification flow rate (approx. L/min)	Flow curve table *Standard specifications (PDF document)
	connection	full length	Overall width	Depth
MKCTV20-1TW	RC1/8	115	30	51	1 to 5
MKCTV20-2TW	Rc1/4	115	30	51
MKCTV20-3TW	Rc3/8	122	30	51

Specifications

Features of MKTV Type

• Flow rate can be seen visually
• Since a transparent tapered tube is used, it is possible to check the approximate flow rate by looking at the relative position of the ball (or float) and the red line.
• With flow rate adjustment valve The required flow rate can be set by adjusting the miniature valve and aligning the ball with the red line .
• No matter the installation direction. Since a spring is used inside, the orientation when installing   can be freely adjusted such as upward, downward, sideways, etc.

Model list

Model	Dimensions (mm)				Standard specification flow rate (approx. L/min)	Flow curve table *Standard specifications
	connection	full length	Overall width	Depth
MKTV25-1TW	RC1/8	94	twenty five	51	1 to 5
MKTV25-2TW	Rc1/4	95	twenty five	51
MKTV25-3TW	Rc3/8	99.5	twenty five	51

Specifications

Specification		Details	Additional Information
Fluid		Water	–
Flow		See above	Please contact us if you require a flow rate below or above the standard specification.
Connection		Rc female thread	Change to R male thread. Combination with R male thread is also possible.
Heatproof Temperature		Maximum 80℃	–
Pressure Resistance		1MPa	–
Material	Transparent Tube	Acrylic	–
	Fittings	C3604 (Brass)	–
	Spring	SUS304	–
	Nylon Ball	Nylon 66	In some cases, cylindrical floats are used.
	Miniature Valve	B.C.	–
	O-Ring	Nitrile Rubber	–

Features

• A transparent tapered tube is used, so the flow rate can be checked by looking at the relative position of the ball (or float) and the red line .
• With protective cover
• The metal protective cover reduces the possibility of damage from external impacts.
• No need to worry about the installation direction
• A spring is used inside, so the installation direction can be freely changed, such as upward, downward, or sideways.

Model list

Model	Dimensions (mm) Overall width may vary due to casting surface.				Standard specification flow rate (approx. L/min)	Flow curve table *Standard specifications (PDF document)
	connection	full length	Overall width	Depth
MKCT20-1TW	Rc1/8	80	30	twenty two	1 to 5
MKCT20-2TW	Rc1/4	80	30	twenty two
MKCT20-3TW	Rc3/8	86	30	twenty two
MKCT30-2TW	Rc1/4	100	44	32	4～17
MKCT30-3TW	Rc3/8	104	44	32
MKCT30-4TW	Rc1/2	110	44	32
MKCT35-4TW	Rc1/2	148	50	44	8 to 30
MKCT35-6TW	Rc3/4	148	50	44
MKCT45-6TW	Rc3/4	171	62	50	10 to 40

Specifications

Specification		Details	Additional Information
Fluid		Water	–
Flow		See above	Please contact us if you require a flow rate below or above the standard specification.
Connection		Rc female thread	Change to R male thread. Combination with R male thread is also possible.
Heatproof temperature		Maximum 80℃	–
Pressure resistance		1MPa	–
Material	Transparent tube	Acrylic	–
	Fittings	C3604 (Brass)	SUS products are also available.
	Protective cover	B.C.	Aluminum versions are also available.
	Spring	SUS304	–
	Nylon ball	Nylon 66	In some cases, cylindrical floats are used.
	O-ring	Nitrile Rubber	–

Features

• Flow switch
• Detects the flow of fluid and turns the switch ON or OFF at the specified flow rate.
• *The switch is fixed (the setting cannot be changed later). A flow detector that checks the flow of fluid by the movement of a float inside a transparent tube that allows you to see the water flow at a glance.
• Comes with a protective cover. The metal protective cover reduces the possibility of damage from external impacts.
• No need to worry about the installation direction.Because a spring is used inside, the installation position can be freely changed, such as upward, downward, or sideways.

Models List

Features

• The transparent tapered tube allows you to see the flow rate at a glance, so you can check the approximate flow rate by looking at the relative position of the ball (or float) and the red line.
• The installation direction is not important.The spring is used inside, so the installation direction can be freely changed, such as upward, downward, or sideways

Model list

Model	Dimensions (mm)			Standard specification flow rate (approx. L/min)	Flow curve table *Standard specifications
	Connection port size	full length	Overall width
MKT25-1TW	RC1/8	78	twenty five	1~6
MKT25-2TW	Rc1/4	78	twenty five
MKT25-3TW	Rc3/8	84	twenty five
MKT30-2TW	Rc1/4	100	30	3~20

Standard Specifications

Features

• The supply of low-flow oil is enable by monitoring the oil dripping from the nozzle inside the transparent tube.
• The flow rate adjustment valve allows for minute adjustment of the dripping of oil.

Features

Specialized type for small flow rates   . It is possible to check the small flow rate by observing the oil dripping from the nozzle inside the transparent tube

Standard size specifications

Features

Specialized type for reducers:
By attaching it to a reducer, you can check the flow of fluid.

Features

• Dedicated type for reducers
  By attaching to a reducer, you can check the oil flow.
  You cannot check the flow rate.

Features

This is a flow detector for checking the flow of oil in copper pipes

For reducers, please select MKK25-8-P.

Features

• Flow is visible at a glance
• This is a flow detector that checks the flow of fluid by the movement of a ball (or float) inside a transparent tube.
• The flow rate cannot be confirmed.
• Comes with a protective cover
• The metal protective cover reduces the possibility of damage due to external impacts.
• Installation orientation is not important Since a spring is used inside, the orientation when installing can be freely adjusted, such as upward, downward, or sideways.

Model list