This product is used for the following applications:

• Vibrator maintenance

• Features

  A kit of various service instruments for high-frequency vibrators suited for worksites

  Winding-up after the repairs and cleaning of internal vibrators is manually conducted. For the EHR50 (hose windup machine), this winding-up has been mechanized. This machine is designed to increase work efficiency, conduct equal winding-up, and alleviate the workload. The source of power is a single-phase 100V gear motor (with brakes). Pressing the foot switch causes winding-up, while releasing it activates the brakes, stopping the machine immediately. Safety is thereby ensured. After the winding-up, you can push down the slide knob to detach the vibrator easily from the winding-up panel.

  Internal checker

  Measurement of the current balance of the internal vibrator

  Multiple internal checker MIC-1

  Measurement of the current balance, insulation between phases, and general insulation

  Simple vibration meter

  Measurement with a simple mobile frequency meter

  Frequency meter EVM / tachometer EVM-S

  The machine is powered with a single commercially available 9 V manganese cell. This frequency meter / tachometer can be used without an external power supply.

  EP plug cleaner

  Waterproof plug terminal polisher for high-frequency

  Pocket tester

  Measurement of voltage and conduction

  

  Specification

  EHR50

  Model	Drive motor					Winding section		Weight （kg）
  	Voltage （V）	Output (W)	Frequency （Hz）	Power cable length (m)		The winding inner diameter (mm)	Rotational speed (min⁻¹)
  EHR50	100	200	50	5		500	16.5	96
  			60				19.0

  （Imperial System）

  Model	Drive motor					Winding section		Weight （lb）
  	Voltage （V）	Output (W)	Frequency （Hz）	Power cable length (ft)		The winding inner diameter (ft)	Rotational speed (min⁻¹)
  EHR50	100	200	50	16’5″		1’8″	16.5	211.6
  			60				19.0

  Dimensions, installation, control panel

  Product dimensional drawings