Power off (during power outage) return type ball valve operator MCP Series
MCP-03 type “Two-wire operation type”

MCP-03 type:
A built-in electric double layer capacitor allows the two-wire operating device to open and close by simply turning the power on and off.

Specification

Specifications

Type JWM-25 Tank Cleaning Gear

This type is the best choice for cleaning and can operate labor-saving.

Features

This type is compact and light.
This type can rotate spontaneously by the pressure of cleaning solution.
It can clean inside of tanks efficiently.
Designed for low or intermediate-pressure cleaning, this device operates without requiring high-pressure pumps.
It can also apply to hot-water and solvent cleaning.
Simple structure.
Price–performance ratio is excellent.
The rotation direction of the body is opposite to the screwed part, so it barely loosens.

Function

For automatic cleaning of various tanks and containers.
For automatic cleaning the inside of various equipment, rooms, or containers

The TWINTIER® RB611T is the fastest solution for tying #5 x #5 to #9 x #10 rebar combinations, making it the largest capacity rebar tying tool on the market. TWINTIER® technology allows the RB611T to tie 5,000 ties per charge, while delivering just the right amount of wire for greater productivity and cost savings. Compared to hand tying this tool can reduce the risk of musculoskeletal injuries.

Applications

• Road and Bridge
• Foundations
• Precast Plants
• Electrical Conduit
• Retaining Walls
• Power Plant
• Water Retaining Structure

FEATURES

• The RB611T’s jaw capacity enables the tool tie up to a #9 x #10* rebar providing an efficient solution for large bar job sites.*Varies by rebar manufacturer.
• The TwinTier’s Dual Wire Feeding Mechanism doubles the tying speed, completing a tie in approximately ½ second, increasing productivity.
• Compared to conventional rebar tying solutions the TwinTier’s Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage and cutting production cost.
• The TwinTier’s “Wire Bending Mechanism” (Patent Pending) produces a shorter tie height which requires less concrete to cover a wire tie.
• An enclosed magazine protects tie wire and internal mechanisms from debris, providing greater durability.
• The Twintier’s Quick Load Magazine allows operators to quickly load tie wire.

SPECIFICATIONS

CONSUMABLES / ACCESSORIES

Features

Au-plated contact materials (Low contact resistance). Φ30mm body.
3 types attenuation circuits.
Used a highly precise resistor. Rear terminal.

Specifications

Electrical Specifications

Mechanical Specifications

General Specifications

Feature

• Sanritsu manufactures its electrode holders in the only plant approved by JIS (Japanese Industrial Standards), capturing an 80% share in Japan’s domestic market.
• These holders feature metallic parts made of resistant materials, ensuring they pass all JIS-mandated inspections and dielectric strength tests.
• Users can rely on these products for safety and confidence.
• Significantly, the metal fittings on these holders, unlike those found in other models, are forged.
• This design choice imparts superior strength, wear resistance, and heat resistance while minimizing temperature increases during use.
• The handle, crafted from a special flexible plastic rather than traditional cast material, offers exceptional impact strength, comparable to other insulating covers.
• Complying with JIS standards, all components uphold strict quality norms.
• This commitment to quality doesn’t come at the expense of affordability or convenience; the parts are mass-produced for cost efficiency.
• Additionally, they are interchangeable, enhancing practicality.
• The cable connection utilizes a hold screw mechanism, simplifying attachment without needing solder or soldering irons, unlike soldering types.
• This feature makes attaching cables to the handle straightforward.

Specifications

Kouei is Distributor/Agent of Sanritsu Electric
Other items of Sanritsu Electric
Request the quotation for Sanritsu Electric

Features

Continuous use max. hot-air temp.  300ﾟC (350ﾟC when the auto-temp controller TRT is used.)
Heatproof blower for the hot-air can be circulated is equipped to the all type. (Energy saving !)
(Hot-air circulation temp.  TSK-17B : 140ﾟC, TSK-22B – 132B : 230ﾟC)
Each sensor for the safety circuit is built. (Electronic safety circuit is adopted.)
(High reliability  thermocouple is adopted to the each safety circuit.)
Each blowerless type (only heater) is prepared.
Safety circuit power supply lamp with the buzzer is equipped.

Specification

This is a small plug-in type high-speed response isolator that isolates the input, output and power supply from each other. It isolates signals of various levels from other circuits and amplifies and converts them into signals that can be handled in a unified manner within the measurement control system, demonstrating its power as a noise countermeasure.

Features

• High-speed response type with a response time of 120 μs
• Fine adjustment of zero and span is possible with a 15-turn trimmer.
• Extends the zero/span adjustment range to ±10%
• Safe design with a withstand voltage of 3000V
• DC30V power supply compatible
• Long-life design & long-term 5-year warranty
• Conforms to CE marking

Specification

Hydraulic Fluid: Petroleum base mineral oil (Contact us when fire-resistant fluid is in used)
Accuracy: Within ± 2.0% of the max. set pressure
Port Size Rc3/8 (G1/2 only for 70MPa use)
Electrical lifetime: 1 million cycles or more.
Mechanical lifetime: ditto
Weight: 1.5kg approximately
Note: The differential pressure differs according to the set pressure.

Features

Summary

PLUG-IN Valstaff provides 24/7 online diagnostic monitoring for Azbil’s smart valve positioners. By tracking real-time performance via HART or FOUNDATION Fieldbus, it prevents unexpected failures and ensures safe, continuous plant operation.
Core Functionality
Preventive Maintenance: Detects early-stage valve issues through constant parameter monitoring.
Efficient Startup: Automates step response testing and positioner adjustments for faster commissioning.
Optimized Planning: Analyzes deterioration data to help managers prioritize overhauls and refine maintenance schedules
Compatibility & Integration
The system integrates directly with leading device management platforms:
Azbil: InnovativeField Organizer.
Yokogawa: Plant Resource Manager (PRM).

Features

PLUG-IN Valstaff optimizes control valve maintenance through three integrated core functions. First, it performs online monitoring by continuously tracking diagnostic data to visualize deterioration and identify abnormalities without interrupting production. Building on this, the system executes automated step response testing during shutdowns to analyze dynamic performance; moreover, by comparing current waveforms against historical data, it reveals wear and significantly shortens maintenance windows. Finally, the intelligent auto-setup function automatically adjusts positioners while measuring stroke time and hysteresis, thereby allowing operators to track long-term trends and pinpoint specific mechanical issues with high precision.

Functions

PLUG-IN Valstaff extracts real-time positioner data to monitor valve health and predict maintenance without downtime:
Usage & Wear: Tracks total travel and shut-off frequency to assess mechanical load and seat ring wear.
Friction & Movement: Monitors reversal cycles and stick-slip motion to detect gland deterioration or sticking parts.
Operational Integrity: Uses travel histograms to verify sizing accuracy and identify internal clogging or trim damage.
Actuator Health: Measures peak speeds to pinpoint air leaks or guidance friction.
Performance Baseline: Compares setpoints with actual travel to provide the primary indicator of control accuracy.

Feature:

Compact design pneumatic cylinders for long strokes (up to 400mm)

• Provided with wear ring as standard part and applicable to long strokes
• New piston structure reduces the cylinder overall length.
• Two types of rod end, female thread and male thread, are available.
• A variety of accessories including mounting accessories and rod end attachments makes the cylinder applicable to a wide range of purposes.
• Order made cylinders of non-rotating type are available.

Specification:

Specifications

Protection : IP55／Gland , IP34／Coaming
Diffuser : 20W type／LS-768N , 40W type／LS-769N
Lamp Holder : G13
Body : Steel
Finish : 7.5BG7／2

Features

• This is a spare part for the rear hub puller AS353 for large vehicles.
• Weight: 656g

DeWAL® DW497 is a white silicone rubber-coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough and abrasion resistant enough to withstand the high temperatures and impact of grit blasting and plasma spraying.

Features & Benefits

• High temperature resistance
• Abrasion resistance
• Single-ply construction

Applications

• Thermal spray masking
• Grit blasting

DeWAL® DW496 is a pressure sensitive tape produced by laminating multiple layers of glass fabric and aluminum foil coated with a high temperature silicone adhesive. The silicone adhesive will release cleanly.

Features & Benefits

• High temperature resistance
• Abrasion resistance
• Double-ply construction

Applications

• Thermal spray masking where single-ply tape will not provide sufficient protection

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWal® DW504 is a pressure sensitive tape produced from a laminate of double-ply silicone rubber, glass cloth and coated with a high temperature silicone adhesive.

Features & Benefits

• Double layer
• Heavy duty
• Adhesive removes cleanly

Applications

• Thermal spray masking tape
• Grit blasting
• Plasma spray, wire are and HVOF processes

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
– All metric conversions are approximate.

Laminate of blue silicone rubber, glass fabric, and aluminum designed for severe duty.

Suitable as a heavy duty tape for masking during the
HVOF spray process.

• Double ply protection provides superior protection for the most demanding thermal spray applications
• Silicone adhesive will release cleanly

All metric conversions are approximate.
Additional technical information is available.
Typical values should not be used for specification limits.

DeWAL® DW 500HT is a one-step plasma masking tape constructed of silicone rubber, a glass cloth backing, and coated with an aggressive high-temperature silicone adhesive. It will withstand grit blast and plasma spray process yet will remove cleanly. The product is similar to our original DeWAL® DW500, but with a higher tack feel to the tape.

Features & Benefits

• High temperature protection
• Has an aggressive high temperature silicone adhesive
• Confirms easily to complex shapes
• High tensile strength
• High tack feel

Applications

• Masking tape in plasma flame spraying
• Grit blasting
• Plasma metallization operations

* Typical values shown are from testing at date of manufacture and should not be used for specification limits.
Additional technical information and product specifications are available upon request.
Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
All metric conversions are approximate.

DeWAL® DW495 is a pressure sensitive tape produced by laminating two layers of our DW407 product together. The resulting composite has two layers of 1 mil foil and glass fabric that is coated with high temperature silicone adhesive. The silicone adhesive will release cleanly.

Features & Benefits

• High temperature resistance
• Abrasion resistance
• Double-ply construction

Applications

• Thermal spray masking where single-ply tape will not provide sufficient protection

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW492 is a pressure sensitive tape produced by laminating two layers of closely woven glass fabric (DW469) together. DW492 is coated with a high temperature silicone adhesive. The glass fabric has superior abrasion and heat resistance.

Features & Benefits

• High temperature resistance
• Abrasion resistance
• Double-ply construction

Applications

• Thermal spray masking where single-plytape will not provide sufficient protection

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW500-47 is a high temperature thermal spray masking tape design for the most severe HVOF applications. It is constructed of glass cloth, silicone rubber and an additional layer of protection with aluminum foil. The foil and glass component enhances heat deflection and improves the overall performance under the most demanding conditions.

Features & Benefits

• Double layer
• Enhanced heat deflection
• Conformable

Applications

• Thermal spray masking tape
• Grit blasting
• Plasma spray, wire arc and HVOF processes

DeWAL® DW500-40 is a masking tape designed for HVOF applications. It is a high temperature thermal spray masking tape designed for the most severe applications. The tape is constructed of glass cloth and silicone rubber. DW500-40 is able to withstand grit blasting and the energy of HVOF spraying processes.

Features & Benefits

• Double layer
• Abrasion Resistant
• Conformable

Applications

• Thermal spray masking tape

• Grit blasting

• Plasma spray, wire arc and HVOF processes

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is one year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

Product is a glass fabric tape with an aggressive silicone adhesive on both sides.
Suitable for high temperature plasma and flame spray masking, overlay where grit blasting may be needed, and cable splicing on down-hole submersible pumps for oil and gas.
• One step masking tape
• Overlap end is designed not to lift at high velocity grit
blasting or thermal spray
• Withstands high temperatures and grit blasting impact

All metric conversions are approximate.
Additional technical information is available.
Typical values should not be used for specification limits.

DeWAL® DW468-77 is a glass cloth tape with an aggressive silicone adhesive on both sides. DW 468-77 is a composite construction consisting of two layers of glass cloth laminated together with each layer being glass cloth and silicone adhesive.

Features & Benefits

• High temperature resistance
• Designed to reduce lifting during plasma spraying process
• Double-ply construction

Applications

• Plasma spray & grit blasting masking tape

• Applications where double-ply protection is necessary

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
– All metric conversions are approximate.

DeWAL® DW417 is a soft aluminum foil, backed with a flexible wear glass cloth. The tape has excellent flexibility and allows conform-ability to irregular, curved surfaces. DW417 carries approval to the ASTM E595-07 outgas testing and has a maximum use temperature of 200°C (390°F). It is supplied on white paper liner.

Features & Benefits

• Conformable to complex shapes
• Silicone free
• Strong adhesion at high temperatures

Applications

• Heat shielding

• Wire harness

• Used in automotive, aerospace and industrial industries

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW411 is a heavy aluminum foil and glass fabric laminate with a high temperature silicone adhesive. The aluminum foil provides excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive provides excellent adhesion at high temperatures yet will remove cleanly.

Features & Benefits

• Removes cleanly at elevated temperatures
• Excellent abrasion resistance
• Great reflective and conductive characteristics

Applications

• Masking tape in plasma flame spraying

• Wire arc

• HVOF

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW500 is a one-step plasma masking tape constructed of a silicone rubber, glass cloth backing, and coated with an aggressive high-temperature silicone adhesive. It will withstand grit blast and plasma spray processes yet will remove cleanly.

Features & Benefits

• High temperature protection
• Aggressive high temperature silicone adhesive
• Conforms easily to complex shapes
• High tensile strength

Applications

• Masking tape in plasma flame spraying
• Grit blasting
• Plasma metallization operations

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
– All metric conversions are approximate.

DeWAL® DW409 is an aluminum foil and glass fabric laminate with a high temperature silicone adhesive. The aluminum foil provides excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive provides excellent adhesion at high temperatures yet removes cleanly.

Features and Benefits

• Removes cleanly at elevated temperatures
• Excellent reflective and conductive characteristics
• Strong adhesion at high temperatures

Applications

• Masking tape in plasma flame spraying
• Heat shield for harness wraps

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW500RD/DW500R is a one-step plasma tape constructed of a red silicone rubber and glass cloth backing coated with an aggressive high-temperature silicone adhesive. It will withstand grit blasting and plasma spray process yet will remove cleanly. DW500RD/DW500R has a higher tack than most other plasma masking tapes which allows it to easily conform to the most complex shapes.

Features & Benefits

• Single layer
• Abrasion Resistant
• Conformable
• Removes cleanly after thermal spray process

Applications

• Thermal spray masking tape

• Grit blasting

• Plasma spray metalization operations

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is one year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW500-20 is a double-ply, high temperature thermal masking tape designed for use in the most severe thermal spray masking applications. DW500-20 is a very good double-ply laminate that is built to withstand the harshest conditions of thermal spraying and has exceptional abrasion resistance, yet remains conformable enough for most demanding parts.

Features & Benefits

• Double layer
• Abrasion Resistant
• Conformable

Applications

• Thermal spray masking tape

• Grit blasting

• Plasma spray, wire arc and HVOF processes

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW407 is an aluminum foil and glass fabric laminate with a high temperature silicone adhesive. The aluminum foil provides excellent reflective and conductive characteristics in high temperature applications. The silicone adhesive provides excellent adhesion at high temperatures yet will remove cleanly.

Features & Benefits

• Removes cleanly at elevated temperatures
• Excellent reflective and conductive characteristics
• Strong adhesion at high temperatures

Applications

• Masking tape in plasma flame spraying
• Heat shield for harness wraps

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F) and 50% RH.
– All metric conversions are approximate.

DeWAL® DW410 is a blue silicone rubber-coated glass fabric with a high temperature silicone adhesive. The silicone rubber is tough, abrasion resistant, and able to withstand high temperatures as well as grit blasting impact. The silicone adhesive provides excellent adhesion at high temperatures yet removes cleanly.

Features & Benefits:

•  Removes cleanly at elevated temperatures
• Excellent abrasion resistance
• One-step plasma masking tape
• Prevents bridging during metalization process

Applications

• Masking tape in plasma flame spraying
• Grit blasting

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW500-10 is a high temperature thermal spray masking tape designed for the use in the most severe thermal spray applications. The tape is constructed of a single layer and will perform the jobs that double-ply laminates do today. DW500-10 is a good low cost alternative to expensive double-ply laminate tapes. It has exceptional abrasion resistance yet it is conformable enough for most demanding parts.

Features & Benefits

• Single layer
• Abrasion Resistant
• Conformable

Applications

• Thermal spray masking tape

• Grit blasting

• Plasma spray, wire arc and HVOF processes

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

DeWAL® DW498 is a laminate of blue silicone rubber, glass fabric, and aluminum foil designed for heavy-duty applications. The silicone adhesive will release cleanly.

Features & Benefits

• High temperature resistance
• Abrasion resistance
• Double-ply construction

Applications

• Thermal spray masking

• Grit blasting

*Typical values shown are from testing at date of manufacture and should not be used for specification limits.
– Additional technical information and product specifications are available upon request.
– Shelf life is 1 year from the date of manufacture with storage conditions of 21°C (70°F)and 50% RH.
– All metric conversions are approximate.

Features

The design adopts an integrated valve and diaphragm type (tie diaphragm).
The parts of the gas contacting are made from SUS316 and undergo special corrosion-resistant surface treatment.
Super-secret structure with He leakage (external leakage) of 1×10-9Pa-m3/sec or less.
Prevents gas leakage from external blowout in the event of diaphragm breakage.

Specifications

Feature

Valve and diaphragm integrated type (tie diaphragm) is adopted.
Gas contacting parts are made of SUS316 with special corrosion resistant surface treatment.
Super-secret structure with He leakage (external leakage) of 1×10-9Pa-m3/sec or less.
Prevents gas leakage from external blowout in the event of diaphragm breakage.

Specifications

Feature

The inside is a simple structure with a capsule-type sheet.
Vacuum-resistant construction.

Specifications