Mechanical Counters | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Fri, 02 Feb 2024 23:44:54 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.5 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png Mechanical Counters | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 Line Seiki Meter/Yard Wheels/Pulleys Measuring Counter (Totalizer) https://koueitrading.com/global/product/line-seiki-meter-yard-wheels-pulleys-measuring-counter-totalizer/ Wed, 24 Jun 2020 08:51:41 +0000 https://koueitrading.com/global/?post_type=product&p=15964 Product Made in Japan Manufacturer: Line Seiki Model: Measuring Wheels / Pulleys Description The measuring wheels are available in Meter/Yard Wheels/Pulleys configurations.  These wheels and pulleys are fully compatible with our length measuring counters. Both the Meter and Yard wheels feature rims crafted from strong plastic. In addition to their basic design, these wheels have […]

The post Line Seiki Meter/Yard Wheels/Pulleys Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: Measuring Wheels / Pulleys

Description

The measuring wheels are available in Meter/Yard Wheels/Pulleys configurations.  These wheels and pulleys are fully compatible with our length measuring counters. Both the Meter and Yard wheels feature rims crafted from strong plastic. In addition to their basic design, these wheels have a special rubber coating. This coating serves a dual purpose: it gives the wheels a better grip, and it also makes sure that they stay steady and don’t slide around while in use.The Meter wheel has a diameter of 106.1mm and shaft hole size of 7.5mm.  The Yard wheel has a diameter of 97mm and shaft hole size of 7.5mm.  The Pulley is a V-groove type pulley and made of durable plastic.

Specification

Unit of Measure Meter Wheels / Pulleys Yard Wheels / Pulleys
Type of Surface Plain Plain
Material of Surface Elastomer Elastomer

Dimension

The diameter of the wheel has been set based on specific conditions. First and foremost, the temperature should be in the range of 20°C to 30°C. Additionally, the humidity level must fall between 40% and 60% relative humidity.

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki Meter/Yard Wheels/Pulleys Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki MWC Series Measuring Counter (Totalizer) https://koueitrading.com/global/product/line-seiki-mwc-series-measuring-counter-totalizer/ Wed, 24 Jun 2020 07:52:26 +0000 https://koueitrading.com/global/?post_type=product&p=15956 Product Made in Japan Manufacturer: Line Seiki Model: MWC Series MWC Series Measuring Counter (Totalizer) https://youtu.be/fbc_kpEGuDU Description of MWC Series The MWC Series is an economical length totalizer which can measure in Meters or Yards.  It is available in 4 or 5 digits with a digit size of 6.0 x 3.5mm in a large viewing […]

The post Line Seiki MWC Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: MWC Series

MWC Series Measuring Counter (Totalizer)

https://youtu.be/fbc_kpEGuDU

Description of MWC Series

The MWC Series is an economical length totalizer which can measure in Meters or Yards.  It is available in 4 or 5 digits with a digit size of 6.0 x 3.5mm in a large viewing display window.  Choices of 1m(y) or 0.1m(y) display resolutions is available.  The MWC series has a plastic housing and equipped with 2 measuring wheels for stability and accuracy.  It counts 1 unit for every 3 revolutions of the measuring wheels up to a maximum count speed of 300 meters (yard)/min.  Clockwise or Counter-clockwise count direction is available. The unit can be mounted via the plastic base and can be reset by turning the reset knob.

Specification

Model Figures Rotations for Additive Unit of Measurements Maximum Count speed Operation Torque Color of Figure
MWC-3:1-5(1) 5 Clockwise 1meter(yard) : 1count 300meter/min
(yard/min)		 15mN.m All figures are on Black background.
MWC–3:1-5(2) Anti-clockwise
MWC-3:10-5(1) Clockwise 10cm(0.1yard) : 1count 30meter/min
(yard/min)
MWC-3:10-5(2) Anti-clockwise

 

MWC-3:1-5(1) MWC-3:1-5(2)
Rotations for
Additive		 Clockwise Rotations for
Additive		 Anti-clockwise
Measuring Range 1m(y) – 99999m(y) Measuring Range 1m(y) – 99999m(y)
Display of Figures | 0 | 0 | 0 | 0 | 1m(y)↑| Display of Figures | 0 | 0 | 0 | 0 | 1m(y)↑|

 

MWC-3:10-5(1) MWC-3:10-5(2)
Rotations for
Additive		 Clockwise Rotations for
Additive		 Anti-clockwise
Measuring Range 10cm(0.1y) – 9999m(y)90cm(0.9y) Measuring Range 10cm(0.1y) – 9999m(y)90cm(0.9y)
Display of Figures | 0 | 0 | 0 | 0 m(y)| 10cm(0.1y)↑| Display of Figures | 0 | 0 | 0 | 0 m(y)| 10cm(0.1y)↑|

 

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension 

Application

Length Measuring

Mechanical length measuring counters serve a versatile role in various industries. Specifically, they are designed to accurately determine the length of materials such as textiles, paper, and plastic film. This makes them an invaluable tool, especially in industries where precise measurements are crucial. By using these counters, manufacturers and workers can ensure that they have the exact lengths needed for their products or projects, promoting consistency and quality in their work. Furthermore, with their mechanical design, these counters provide reliable results and can be a cornerstone in ensuring the precision of measurements across a range of materials.

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki MWC Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RY Series Measuring Counter (Totalizer) https://koueitrading.com/global/product/line-seiki-ry-series-measuring-counter-totalizer/ Wed, 24 Jun 2020 07:27:44 +0000 https://koueitrading.com/global/?post_type=product&p=15955 Product Made in Japan Manufacturer: Line Seiki Model: RY Series RY Series Measuring Counter (Totalizer) Description The RY Series is a rugged and heavy-duty length totalizer.  It has an all-metal housing with a nice finish.  The RY Series can measure in Meter or Yard in 0.1m(y) or 0.01 m(y) display resolutions.  It is available in […]

The post Line Seiki RY Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RY Series

RY Series Measuring Counter (Totalizer)

Description

The RY Series is a rugged and heavy-duty length totalizer.  It has an all-metal housing with a nice finish.  The RY Series can measure in Meter or Yard in 0.1m(y) or 0.01 m(y) display resolutions.  It is available in 4 or 5 digits with a digit size of 6.0mm x 4.0mm.  The unit can be reset by a simple push of the reset button. The RY Series equipped with 2 measuring wheels for stability and accuracy of the measurement. The RY Series counts 1 unit for every 3 revolutions of the measuring wheel up to a maximum count speed of 300 meters(yards)/min.  It has a metal base for sturdy mounting.

Specification

Model Figures Rotations for Additive Unit of Measurements Maximum Count speed Operation Torque Color of Figure
RY-3:10-4(1) 4 Top-going 0.1meter
(yard)		 300meter
(yard/min)		 15mN.m First figure is Yellow on Black background.
Others are White on Black background
RY-3:10-4(2) 4 Top-coming
RY-3:10-5(1) 5 Top-going
RY-3:10-5(2) 5 Top-coming
RY-3:100-4(1) 4 Top-going 0.01meter
(yard)		 30meter
(yard/min)		 20mN.m First and second figure are Yellow on Black background.
Others are White on Black background.
RY-3:100-4(2) 4 Top-coming
RY-3:100-5(1) 5 Top-going 25mN.m
RY-3:100-5(2) 5 Top-coming

 

RY-3:10-4(1) RY-3:10-4(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.1m(y) – 999.9m(y) Measuring Range 0.1m(y) – 999.9m(y)
Display of Figures | 0 | 0 | 0m(y) | 0 | | 0 | 0 | 0m(y) | 0 |

 

RY-3:10-5(1) RY-3:10-5(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.1m(y) – 9999.9m(y) Measuring Range 0.1m(y) – 9999.9m(y)
Display of Figures | 0 | 0 | 0 | 0m(y) | 0 | Display of Figures | 0 | 0 | 0 | 0m(y) | 0 |

 

RY-3:100-4(1) RY-3:100-4(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.01m(y) – 99.99m(y) Measuring Range 0.01m(y) – 99.99m(y)
Display of Figures | 0 | 0m(y) | 0 | 0 | | 0 | 0m(y) | 0 | 0 |

 

RY-3:100-5(1) RY-3:100-5(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.01m(y) – 999.99m(y) Measuring Range 0.01m(y) – 999.99m(y)
Display of Figures | 0 | 0 | 0m(y) | 0 | 0 | Display of Figures | 0 | 0 | 0m(y) | 0 | 0 |

 

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Application

Length Measuring

Mechanical length measuring counters serve a versatile role in various industries. Specifically, they are designed to accurately determine the length of materials such as textiles, paper, and plastic film. This makes them an invaluable tool, especially in industries where precise measurements are crucial. By using these counters, manufacturers and workers can ensure that they have the exact lengths needed for their products or projects, promoting consistency and quality in their work. Furthermore, with their mechanical design, these counters provide reliable results and can be a cornerstone in ensuring the precision of measurements across a range of materials.

The post Line Seiki RY Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RY1 Series Measuring Counter (Totalizer) https://koueitrading.com/global/product/line-seiki-ry1-series-measuring-counter-totalizer/ Wed, 24 Jun 2020 07:16:18 +0000 https://koueitrading.com/global/?post_type=product&p=15954 Product Made in Japan Manufacturer: Line Seiki Model: RY1 Series RY1 Series Measuring Counter (Totalizer) Description The RY1 Series is a rugged and heavy-duty length totalizer.  It has an all-metal housing with a nice finish.  The RY Series can measure in Meter or Yard in 0.1m(y) or 0.01 m(y) display resolutions.  It is available in […]

The post Line Seiki RY1 Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RY1 Series

RY1 Series Measuring Counter (Totalizer)

Description

The RY1 Series is a rugged and heavy-duty length totalizer.  It has an all-metal housing with a nice finish.  The RY Series can measure in Meter or Yard in 0.1m(y) or 0.01 m(y) display resolutions.  It is available in 4 or 5 digits with a digit size of 6.0mm x 4.0mm.  The unit can be reset by a simple push of the reset button. The RY1 Series is equipped with 2 measuring wheels for stability and accuracy of the measurement. The RY1 Series counts 1 unit for every 3 revolutions of the measuring wheel up to a maximum count speed of 300 meters(yards)/min.  It has a metal base for sturdy mounting.

Specification

Model Figures Rotations for Additive Unit of Measurements Maximum Count speed Operation Torque Color of Figure
RY1-3:10-4(1) 4 Top-going 0.1meter
(yard)		 300meter
(yard/min)		 15mN.m The first figure is Yellow on Black background.
Others are White on Black background
RY1-3:10-4(2) 4 Top-coming
RY1-3:10-5(1) 5 Top-going
RY1-3:10-5(2) 5 Top-coming
RY1-3:100-4(1) 4 Top-going 0.01meter
(yard)		 30meter
(yard/min)		 20mN.m The first and second figures are Yellow on Black background.
Others are White on Black background.
RY1-3:100-4(2) 4 Top-coming
RY1-3:100-5(1) 5 Top-going 25mN.m
RY1-3:100-5(2) 5 Top-coming

 

RY1-3:10-4(1) RY1-3:10-4(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.1m(y) – 999.9m(y) Measuring Range 0.1m(y) – 999.9m(y)
Display of Figures | 0 | 0 | 0m(y) | 0 | | 0 | 0 | 0m(y) | 0 |

 

RY1-3:10-5(1) RY1-3:10-5(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.1m(y) – 9999.9m(y) Measuring Range 0.1m(y) – 9999.9m(y)
Display of Figures | 0 | 0 | 0 | 0m(y) | 0 | Display of Figures | 0 | 0 | 0 | 0m(y) | 0 |

 

RY1-3:100-4(1) RY1-3:100-4(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.01m(y) – 99.99m(y) Measuring Range 0.01m(y) – 99.99m(y)
Display of Figures | 0 | 0m(y) | 0 | 0 | | 0 | 0m(y) | 0 | 0 |

 

RY1-3:100-5(1) RY1-3:100-5(2)
Rotations for Additive Top-going Rotations for Additive Top-coming
Measuring Range 0.01m(y) – 999.99m(y) Measuring Range 0.01m(y) – 999.99m(y)
Display of Figures | 0 | 0 | 0m(y) | 0 | 0 | Display of Figures | 0 | 0 | 0m(y) | 0 | 0 |

 

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Application

Length Measuring

Mechanical length measuring counters can be used to measure the length of textiles, paper, plastic film and so on.

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RY1 Series Measuring Counter (Totalizer) first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki SR-4 Rotary / Direct Drive Counter https://koueitrading.com/global/product/line-seiki-sr-4-rotary-direct-drive-counter/ Wed, 24 Jun 2020 04:57:15 +0000 https://koueitrading.com/global/?post_type=product&p=15941 Product Made in Japan Manufacturer: Line Seiki Model: SR-4 SR-4 Rotary / Direct Drive Counter Description of SR-4 The SR-4 is a compact rotary counter with a clear 4-digit display, each digit measuring 4.3 x 2.8mm. Uniquely, its input shaft is positioned on the top right and rotates in one direction. This efficient counter can […]

The post Line Seiki SR-4 Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: SR-4

SR-4 Rotary / Direct Drive Counter

Description of SR-4

The SR-4 is a compact rotary counter with a clear 4-digit display, each digit measuring 4.3 x 2.8mm. Uniquely, its input shaft is positioned on the top right and rotates in one direction. This efficient counter can achieve speeds up to 200 rpm. Furthermore, for easy resetting, there’s a handy push-button located at the top, streamlining the user experience.

Specification

Display 4digits, 4.3 x 2.8mm (White on Black Background)
Preset Range 1 – 9999 (1counts per 1/10 shaft revolution)
Shaft Rotation Top – Going (Clockwise)
Operation Torque 4mN.m
Count Speed 200revolution/minute
Reset Push-button
Weight 60grams

 

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki SR-4 Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RL-219 Rotary / Direct Drive Counter https://koueitrading.com/global/product/line-seiki-rl-219-rotary-direct-drive-counter/ Wed, 24 Jun 2020 04:57:07 +0000 https://koueitrading.com/global/?post_type=product&p=15940 Product Made in Japan Manufacturer: Line Seiki Model: RL-219 RL-219 Rotary / Direct Drive Counter Description of RL-219 The RL-219 Series is a large size 5 digit rotary counter.  It has a large digit size of 6.0 x 4.5mm.  The counter is right shaft – top going, 10 counts/revolution of the input shaft, maximum count […]

The post Line Seiki RL-219 Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RL-219

RL-219 Rotary / Direct Drive Counter

Description of RL-219

The RL-219 Series is a large size 5 digit rotary counter.  It has a large digit size of 6.0 x 4.5mm.  The counter is right shaft – top going, 10 counts/revolution of the input shaft, maximum count speed of 50 rpm. RL-219 Series is base mounted and comes with a reset knob.  Non-reset type is available upon request.

Count Type

Direct Drive Counter

Adds 10 counts for every complete revolution (1 count / 1/10 shaft revolution) of the shaft.
Count Speed: RL-4 (I), RL-5 (I) : 400 revolutions / minute RL-219-5 (I) : 50 revolutions / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Direct drive (10 counts /rev) 5 6.0 x 4.5 RL-219-5 (1) – – –

Specification of RL-219

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85％RH maximum(Non-Condensing)

Dimension

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RL-219 Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RL Series Rotary / Direct Drive Counter https://koueitrading.com/global/product/line-seiki-rl-series-rotary-direct-drive-counter/ Wed, 24 Jun 2020 04:56:58 +0000 https://koueitrading.com/global/?post_type=product&p=15939 Product Made in Japan Manufacturer: Line Seiki Model: RL Series RL Series Rotary / Direct Drive Counter Description The RL Series is a small size rotary counter.  It comes in 4 or 5 digits and digits size is 4.4 x 2.8mm.  The counter is right shaft – top going, 10 counts/revolution of the input shaft, […]

The post Line Seiki RL Series Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RL Series

RL Series Rotary / Direct Drive Counter

Description

The RL Series is a small size rotary counter.  It comes in 4 or 5 digits and digits size is 4.4 x 2.8mm.  The counter is right shaft – top going, 10 counts/revolution of the input shaft, maximum count speed of 400 rpm.  The RL Series is base mounted and comes with a reset knob.  Non-reset type is available upon request.

Count Type

Direct Drive Counter

Adds 10 counts for every complete revolution (1 count / 1/10 shaft revolution) of the shaft.
Count Speed: RL-4 (I), RL-5 (I) : 400 revolutions / minute RL-219-5 (I) : 50 revolutions / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Direct drive (10 counts /rev) 4 5.0 x 3.8 RL-4(1) – – –
5 RL-5(1) – – –

Specification

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RL Series Rotary / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki LB Series Revolution Counter https://koueitrading.com/global/product/line-seiki-lb-series-revolution-counter/ Wed, 24 Jun 2020 04:56:46 +0000 https://koueitrading.com/global/?post_type=product&p=15938 Product Made in Japan Manufacturer: Line Seiki Model: LB Series LB Series Revolution Counter Description The LB Series is a small size revolution counter.  It comes in 4 or 5 digits and digits size is 4.4 x 2.8mm viewable in a wide display window.  The counter is right shaft – top going, 1 count/revolution of […]

The post Line Seiki LB Series Revolution Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: LB Series

LB Series Revolution Counter

Description

The LB Series is a small size revolution counter.  It comes in 4 or 5 digits and digits size is 4.4 x 2.8mm viewable in a wide display window.  The counter is right shaft – top going, 1 count/revolution of the input shaft, maximum count speed of 4,000 rpm.  The LB Series is base mounted and with a reset knob.  Non-reset type is available upon request.

Count Type

Revolution Counter

Adds 1 count for every complete revolution of the shaft.
Count Speed: LB-4 (I), LB-5 (I) : 4,000 revolutions / minute

Count Direction / Shaft Position

TYPE 1:
Shaft on right
Top Going

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Revolution (1 count / rev) 4 5.0 x 3.8 LB-4(1) – – –
5 LB-5(1) – – –

Specification

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki LB Series Revolution Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RS-303 Ratchet Counter https://koueitrading.com/global/product/line-seiki-rs-303-ratchet-counter/ Wed, 24 Jun 2020 04:56:39 +0000 https://koueitrading.com/global/?post_type=product&p=15937 Product Made in Japan Manufacturer: Line Seiki Model: RS-303 RS-303 Ratchet Counter Description The RS-303 Series is a large size 5 digit ratchet counter.  It has a large digit size of 6.0 x 4.5mm. The counter features a shaft on the right side that moves in an upward direction. It counts using a ratchet movement […]

The post Line Seiki RS-303 Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RS-303

RS-303 Ratchet Counter

Description

The RS-303 Series is a large size 5 digit ratchet counter.  It has a large digit size of 6.0 x 4.5mm. The counter features a shaft on the right side that moves in an upward direction. It counts using a ratchet movement mechanism within the input shaft and can handle speeds as fast as 300 counts every minute. As part of the RS-303 series, this counter is designed to be mounted at the base. Moreover, it includes a convenient reset knob for easy adjustments.

Count Type

Ratchet Counter

Adds 1 count for each 40 – 45° actuation of lever.

Count Speed:

  • RS-204, RSL-204 Series : 1,000 counts / minute
  • RS-5 (II), RS-6 (I) : 600 counts / minute
  • RS-4 (I), RS-5 (I), RS-303-5 (I) : 300 counts / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Ratchet (Adds 1 count for each 40 – 45° actuation of lever) 5 6.0 x 4.5 RS-303-5 (1) – – –

Specification

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Application

Metal Stamp Machine / Various Machines

To make the most of our investment and boost profits, it’s essential to monitor machine usage by tracking the number of units it produces. Each time the machine completes a stroke, the counter adds a unit. You can set the machine to register the stroke either when it moves up or down.

 

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RS-303 Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RS Series Ratchet Counter https://koueitrading.com/global/product/line-seiki-rs-series-ratchet-counter/ Wed, 24 Jun 2020 04:56:27 +0000 https://koueitrading.com/global/?post_type=product&p=15936 Product Made in Japan Manufacturer: Line Seiki Model: RS Series RS Series Ratchet Counter Description The RS Series is a small size ratchet counter.  It comes in 4,5 or 6 digits and digits size is 4.4 x 2.8mm. The counter, which is part of the RS series, has a shaft on the right side. This […]

The post Line Seiki RS Series Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RS Series

RS Series Ratchet Counter

Description

The RS Series is a small size ratchet counter.  It comes in 4,5 or 6 digits and digits size is 4.4 x 2.8mm. The counter, which is part of the RS series, has a shaft on the right side. This shaft can move either upward (top-going) or downward (top-coming). Through the ratchet movement mechanism in its input shaft, it can tally up counts at a fast pace, ranging from 300 to 600 counts every minute. Additionally, for ease of use, it’s designed to be placed on a base and features a handy reset knob for quick adjustments.

Count Type

Ratchet Counter

Adds 1 count for each 40 – 45° actuation of lever.

Count Speed:

  • RS-204, RSL-204 Series : 1,000 counts / minute
  • RS-5 (II), RS-6 (I) : 600 counts / minute
  • RS-4 (I), RS-5 (I), RS-303-5 (I) : 300 counts / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going		 TYPE 2
Shaft on right
Top Coming

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Ratchet (Adds 1 count for each 40 – 45° actuation of lever) 4 4.4 x 2.8 RS-4(1) – – –
5 4.4 x 2.8 RS-5(1) RS-5(2) – –
6 5.0 x 3.8 RS-6(1) – – –

Specification

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Application

Metal Stamp Machine / Various Machines

Machine usage monitoring by counting the units produced is necessary to maximize investment and profitability. The counter will start to increment every stroke made by the machine. Stroke can be set either going UP or DOWN.

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RS Series Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki RS-204 Series Ratchet Counter https://koueitrading.com/global/product/line-seiki-rs-204-series-ratchet-counter/ Wed, 24 Jun 2020 03:41:43 +0000 https://koueitrading.com/global/?post_type=product&p=15932 Product Made in Japan Manufacturer: Line Seiki Model: RS-204 Series Description The RS-204 Series is a small size 5 digit ratchet counter with a 4.8 x 2.4mm digit size.  The counter is right or left shaft – top going or top coming and counting is done through ratchet movement of the input shaft with speeds […]

The post Line Seiki RS-204 Series Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: RS-204 Series

Description

The RS-204 Series is a small size 5 digit ratchet counter with a 4.8 x 2.4mm digit size.  The counter is right or left shaft – top going or top coming and counting is done through ratchet movement of the input shaft with speeds up to 1,000 counts/minute.  The RS-204 series has a metal case and base mounted and comes with a reset knob.  Non-reset type is available upon request.

Count Type

Ratchet Counter

Adds 1 count for each 40 – 45° actuation of the lever.

Count Speed:

  • RS-204, RSL-204 Series: 1,000 counts/minute
  • RS-5 (II), RS-6 (I): 600 counts/minute
  • RS-4 (I), RS-5 (I), RS-303-5 (I) : 300 counts / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going		 TYPE 2
Shaft on right
Top Coming		 TYPE 3
Shaft on left
Top Going		 TYPE 4
Shaft on left
Top Coming

Model Selection

Type Digits Figures(mm) Type1 Type2 Type3 Type4
Ratchet (Adds 1 count for each 40 – 45°actuation of the lever) 5 4.8 x 2.4 RS-204-5(1) RS-204-5(2) RSL-204-5(3) RSL-204-5(4

Specification

Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 85%RH maximum(Non-Condensing)

Dimension

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki RS-204 Series Ratchet Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki KZ Series Ratchet / Revolution / Direct Drive Counter https://koueitrading.com/global/product/line-seiki-kz-series-ratchet-revolution-direct-drive-counter/ Wed, 24 Jun 2020 03:41:18 +0000 https://koueitrading.com/global/?post_type=product&p=15930 Product Made in Japan Manufacturer: Line Seiki Model: KZ Series KZ Series Ratchet / Revolution / Direct Drive Counter Description KZ Series has a body of the smallest among LINE SEIKI counters: 20 mm drum-shaped housing. This non-resettable 5-digit totalizer can cater to various applications, such as Circuit Breakers, Switchgear, Gaming Machines, and many more. […]

The post Line Seiki KZ Series Ratchet / Revolution / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: KZ Series

KZ Series Ratchet / Revolution / Direct Drive Counter

Description

  • KZ Series has a body of the smallest among LINE SEIKI counters: 20 mm drum-shaped housing.
  • This non-resettable 5-digit totalizer can cater to various applications, such as Circuit Breakers, Switchgear, Gaming Machines, and many more.
  • When the space for mounting is extremely limited, KZ Series will be your ideal partner for counting as it fits anywhere thanks to its microminiature structure.
  • From 3 types, you can select the most appropriate actuation method for your own application: Revolution, Direct Drive and Ratchet.

Count Type

Revolution Counter
Adds 1 count for every complete revolution of the shaft.
Count Speed: 1000 revolutions / minute
Direct Drive Counter
Adds 10 counts for every complete revolution (1 count / 1/10 shaft revolution) of the shaft.
Count Speed: 100 revolutions / minute
Ratchet Counter
Adds 1 count for each 40 – 45° actuation of lever.
Count Speed: 500 counts / minute

Count Direction / Shaft Position

TYPE 1
Shaft on right
Top Going		 TYPE 2
Shaft on right
Top Coming		 TYPE 3
Shaft on left
Top Going		 TYPE 4
Shaft on left
Top Coming

Model Selection

Type Digits Figures Weight(g) Type1 Type2 Type3 Type4
Revolution (1 count / rev) 5 4.2 mm(H) 10 KZ-105(1) KZ-105(2) KZ-105(3) KZ-105(4)
Direct drive (10 counts /rev) 10 KZ-205(1) KZ-205(2) KZ-205(3) KZ-205(4)
Ratchet (Adds 1 count for each 40 – 45°actuation of the lever) 14 KZ-305(1) KZ-305(2) KZ-305(3) KZ-305(4)

Specification

Reset None IP Rating IP40
Operating Torque KZ-105 KZ-205 : 0.5mN.m / KZ-305 : 10mN.m
Operating Temperature -5 – +40°C(Non-freezing) Operating humidity 35 – 85%RH (Non-Condensing)

Dimension

Application

Gaming/ Amusement/Vending Machine

Gaming_image

Reliable and efficient counting for gaming/vending/amusement machines is essential to maximize machine profitability.

Metal Stamp Machine / Various Machines

Metal_Stamp_image

Machine usage monitoring by counting the units produced is necessary to maximize investment and profitability. The counter will start to increment every stroke made by the machine. Stroke can be set either going UP or DOWN.
The post Line Seiki KZ Series Ratchet / Revolution / Direct Drive Counter first appeared on Kouei Japan Trading | Get Quotation.]]>