Format list

Specification

Format list

Format list

Format list

Specification

Format list

Specification

Ordering number	format	Figure	A	B	C	D	E	F	G	H	Applicable models* indicates discontinued models.
PM01- 1 2	PV-5	E-1	20	50	46	38	38	4-Φ6	48	35	NCK-20 NCH-4F HV-5
PM02- 1 2	PV-15	E-1	twenty five	68	66	50	50	4-Φ7	66	48	NCK-40 *NCH-5F HV-10
PM03- 1 2	PV-25	E-1	41	80	80	60	60	4-Φ10	79	56	PV-25 NV-4 HV-15
PM04- 1 2	PV-30	E-1	30	118	80	82	56	4-Φ10	111	78	PV-30 NCA HV-20
PM05- 1 2	PV-40	E-1	40	118	100	82	80	4-Φ10	111	78	PV-40
PM06- 1 2	PV-45	E-1	50	135	100	82	80	4-Φ10	128	89	PV-45
PM07- 1 2	PV-50	E-1	50	165	110	135	85	4-Φ12	146	98	PV-50
PM08- 2	PV-60	E-1	60	195	140	150	110	4-Φ14	171	118	PV-60
PM09- 2	PV-80	E-1	70	200	170	170	134	4-Φ19	171	117	*PV-80
PM10- 1 2	NCH-2	E-2	12	29				M4	28	twenty five	NCH-2 NCH-2F NCH-3F NCK-15
PM11- 1 2	HV-00	E-2	12	29				M4	28	twenty five	HV-00 diode built-in
PM12- 1 2	HV-01	E-2	13	40	15	3.5		M6	41	30	HV-01 diode built-in
PM13- 1 2	HV-02	E-2	20	48	20	5		M8	48	36	HV-02 diode built-in
PM14- 1 2	HV-03	E-2	twenty five	55				M10	57	51	HV-03 diode built-in
PM15- 1 2	PV-20	U-1	18	62	62	50	50	4-Φ7	60	54	NCK-60 NV-3
PM16- 1 2	PVH-14	U-1	20	72	68	38	60	4-Φ5.2	58	76	PVH-14
PM17- 1 2	PVH-18	U-1	twenty five	66	85	45	70	4-Φ7	66	70	PVH-18 PVH-23
PM18- 1 2	PVH-28	U-1	40	98	116	65	98	4-Φ9	75	100	PVH-28
PM19- 1 2	PVH-35	U-2	twenty two	81	55	40	9	2-Φ6	58	76	PVH-35
PM20- 1 2	PVH-45	U-2	36	107	71	50	11	2-Φ8.5	72	88	*PVH-45
PM21- 1 2	PVH-55	U-2	35	103	73	50	11	2-Φ8.5	72	88	*PVH-55
PM22- 1 2	NCH-1	NCH-1									NCH-1
PM23- 1 2	PVH-01	PVH-01									PVH-01
PM24- 1 2	NV-2	NV-2									NV-2

Features

Specification

Ordering number	A	B	C	D	E	F	Figure	Applicable models* indicates discontinued models.
PS1051S	50	7	40	4.2	0.5		1	PVH-01 PVH-14
PS1052S	50	7	40	4.2	1		1
PS1071S	65	16	50	5.5	1		1	HV-5
PS1072S	65	16	50	5.5	1.6		1
PS1101S	100	19	80	8.5	1.2		1	PVH-18 PVH-23
PS1102S	100	19	80	8.5	1.6		1
PS1103S	100	19	80	8.5	2		1
PS1111S	105	35	80	10.5	1.6		1	PVH-28 PVH-35
PS1112S	105	35	80	10.5	2		1
PS1113S	105	35	80	10.5	2.5		1
PS1121S	122	32	103	9	2		1	NC-A
PS1122S	122	32	103	9	3		1
PS1141S	139	19	120	8.5	1.6		1	PV-25
PS1142S	139	19	120	8.5	3		1
PS1191S	185	19	159	11	1.2		1	PV-30 PV-40 50Hz
PS1192S	185	18	159	11	1.8		1
PS1190S	185	18	159	11	2.3		1
PS1199S	185	18	159	11	3		1
PS1194S	185	twenty five	159	11	1.2		1	PV-30 PV-40 60Hz
PS1195S	185	twenty five	159	11	1.8		1
PS1196S	185	twenty five	159	11	2.3		1
PS1201S	200	30	166	13	1.8		1	PV-45
PS1202S	200	30	166	13	3		1
PS1203S	200	35	166	13	3		1	PV-50
PS1204S	200	30	166	13	5		1
PS1241S	240	40	200	16.5	3		1	PV-60
PS1242S	240	40	200	16.5	5		1
PS1243S	240	40	200	16.5	8		1
PS1261S	260	50	210	17	5		1	*PV-80
PS1262S	260	50	210	17	8		1
PS1263G	260	50	210	17	8		1
PS2031G	31	twenty one	twenty five	3.2	0.6	15	2	NCH-1
PS2032G	31	twenty one	twenty five	3.2	0.8	15	2
PS2033G	31	twenty one	twenty five	3.2	1	15	2
PS2041G	46	20	36	4.3	0.8	10	2	NCH-3F vibration isolation spring
PS2042G	46	20	36	4.3	1	10	2	NCH-4F vibration isolation spring
PS2051G	50	28	40	4.3	0.6	20	2	NCH-2 NCH-2F NCH-3F NCK-15
PS2052G	50	28	40	4.3	0.8	20	2
PS2053G	50	28	40	4.3	1	20	2
PS2071S	65	30	55	5.3	0.8	16	2	NCK-20, NCH-4F
PS2091S	90	50	70	5.5	1	30	2	NCK-40
PS2094S	85	60	70	6.6	1	45	2	NCK-60, NV-2, 3, 4
PS2097S	85	30	66	5.5	1	15	2	HV-10
PS2098S	85	30	66	5.5	2	15	2
PS2141S	140	50	103	8.5	2	30	2	HV-15 HV-20
PS2142S	140	50	103	8.5	3	30	2
PS3081G	79	28	40	4.3	0.6	20	3	NCH-2F vibration isolation spring
PS5041S	46		4.2	4	0.3		4	HV-00
PS5061G	62		6.5	3.2	0.8		4	HV-01
PS5071G	70		8.5	3.2	1		4	HV-02
PS5091G	90		10.5	5.8	2		4	HV-03

Fromat list

LS-5 and LS-6 have the same dimensions. LS-5 has a sensor that turns ON when light is received, while LS-6 has a sensor that turns ON when light is blocked.
LS-5 and LS-6 each come with their own dedicated stand.
Dimensions A and B are the dimensions at the time of ordering.

Features

・The standard specification does not include a controller.
– Large quantities of workpieces can be stocked and a fixed quantity can be supplied to parts feeders, conveyors, etc. without straining the workpieces.

Format list

Features

・The standard specification does not include a controller.
-Compared to the HP type, the straight feeder’s forced discharge allows for smooth supply to the parts feeder, and by attaching a photocell to the straight chute side, it is possible to detect missing items in the hopper.
・At the time of delivery, the vibrator section will be covered.

Format list

Features

・The standard specification does not include a controller.
– The installation area is small and the space below the hopper is large, which is advantageous when there are restrictions on installation location, etc.

Format list

Features

・Based on the NCH-2F, a rotating drum is attached to the rear of the linear feeder, integrating the functions of a hopper, parts feeder and linear feeder into one.
・Since the chute is a custom-made product to fit the workpiece, a discussion on specifications is required.

Format list

Features

– The half-wave drive general-purpose parts feeder can handle a wide range of parts, including those that are difficult to align and those with low feeding efficiency.
– Three electromagnets (magnetic coils) are installed: PVH-35.

Specification

Features

• 1 electromagnet (magnet coil)
  – Simplified mechanical component configuration makes maintenance easy.
• With a wide range of models and various alignment methods, we can handle a wide range of products, from general parts to heavy items such as large billets.

Specification

Features

Used in hoppers, sieves, conveyors, etc.

Format list

Features

– A lightweight vibrator with the tip of the bar attached to the opponent’s chute.
NC – The vibration state will vary depending on the installation method and the rigidity of the side that requires leading.
Basically it is used without a controller.

Format list

Features

The NCH series linear feeders have a simplified mechanical configuration, resulting in fewer breakdowns, and their low vibration and high speed make them suitable for feeding tiny workpieces into small spaces.
– The NC-A type is a linear feeder that is ideal for feeding relatively large, light, and bulky workpieces, and can transport workpieces evenly even when using a wide, large chute.
– The cover and fixing brackets will be included at the time of delivery.

Format list

Features

– The vibrations at the back and front of the chute are different.
– The cover and fixing brackets will be included at the time of delivery.

Format list

Features

The center of gravity of the bottom of the main body is designed to be at the top, making it easy to set up the chute.
The photo shows the product with protective fittings. Please remove them when using the product except for adjusting the number of leaf springs, etc.

Format list

Features

This is a floating linear feeder with rubber feet to reduce the transmission of vibrations to the base to which it is attached, and with built-in vibration-damping rubber, it is less susceptible to the effects of vibrations from other parts, ensuring stable movement.

Format list

Features

Ambient temperature: 0℃ to 40℃
Ambient humidity: 10 to 90% RH (no condensation)
・Compatible with AC100/200V

Features

Ambient temperature: 0℃ to 40℃
Ambient humidity: 10 to 90% RH (no condensation)
・Compatible with AC100/200V

Specification

Ordering number	PC-S10
specification	Input Power	AC100V/200V 50Hz/60Hz
	Drive system	PWM (pulse width modulation)
	Control Function	Startup by external signal or sensor / Continuous start
	External Control	Controllable by non-voltage contacts. Controllable by externally applied voltage. *DC12-24V
	Output Current	MAX 1A
	Setting range	45 to 360Hz *Can be changed using parameters
remarks	Compatible main unit (manufactured by our company)	PV-25, 30 (only when using AC200V), PVH-01, 14, 18, 23 (only when using AC200V except for PVH-01), linear feeders and hoppers rated at 1A or less (excluding NC-A, HV-20, HLF60-80, HP-60-70 even when using AC200V)

Download the drawings and instruction manual here

Features

It has a large capacity switching contact that cannot be achieved with conventional commercially available sensor controllers, and can directly drive the parts feeder.
Ambient temperature: 0℃ to 40℃
Ambient humidity: 10 to 90% RH (no condensation)
・Compatible with AC100/200V

Features

Ambient temperature: 0℃ to 40℃
Ambient humidity: 10 to 90% RH (no condensation)
・Compatible with AC100/200V

Format list

Specification

Ordering number	PC11
specification	Input Power	AC100V/200V 50Hz/60Hz
	Drive system	Variable frequency and voltage Half wave (RC)/Full wave (AC)
	Control Function	Startup by external signal or sensor / Continuous start
	External Control	Controllable by non-voltage contact *Optional INF-3 required Controllable by external applied voltage *DC12-24V
	timer	No ON/OFF delay function
	Output Current	MAX 1.0A
	Setting range	45 to 200 Hz
remarks	Compatible main unit (manufactured by our company)	PVH-01, PVH-14 (200V only) , PV-25 (200V only), PV-30 (200V only) Linear feeders and hoppers rated at 1A or less (excluding NC-A, HV-20, HLF60-80, HP-60-70 even when using AC200V)

Download the drawings and instruction manual here

Features

・Half-wave dedicated controller
Ambient temperature: 0℃ to 40℃
Ambient humidity: 10 to 90% RH (no condensation)
・Compatible with AC100/200V

Features

Sold without normal shipping.
Square lots and triangular lots are available.
-Material: Stainless steel SUS304

Format list

Features

– Compared to a cylindrical bowl, there are no rails above the feed path, so workpieces do not get clogged.
-Material: Stainless steel SUS304

Format list

Features

It is easy to attach a return pocket, so it is easy to use an overflow that allows the work to spill out.
Because the feed path is located directly above the feed channel, it is important to select a bowl with sufficient lead for the size of the workpiece to prevent it from becoming clogged.
Material: Stainless steel SUS304

Specification