Nagaki Seiki | Kouei Japan Trading | Get Quotation

Nagaki Seiki Peeling Tools And Cutters

kvt part2 — Wed, 03 Jun 2020 08:54:05 +0000

Manufacturer: Nagaki Seiki Co., Ltd.

Stripping tools for the outer sheath and insulation of electric wires, communication lines, etc.: “Hot Hugler,” “Mukeru,” “Kireru.”
Cutting cutter for electric wires and cables: “Kitter.”

Even wires with fins can be easily stripped.
Designed for specific wire sizes. Suitable for stripping wires of fixed lengths such as OC, OCW, OE, and CV wires.
Please specify the wire type and size.

Attention

★Please be sure to read the attached “Instruction Manual” before use.
★Specifications may be changed without notice due to product improvements.

The post Nagaki Seiki Peeling Tools And Cutters first appeared on Kouei Japan Trading | Get Quotation.

Nagaki Seiki Benri Latch

kvt part2 — Wed, 03 Jun 2020 08:47:55 +0000

Manufacturer: Nagaki Seiki Co., Ltd.

This versatile ratchet wrench allows you to tighten and loosen bolts and nuts of four different sizes by sliding the socket.

Precautions regarding product handling

◇The insulated handle has insulating properties for use in high-voltage power distribution work, but when using it on live lines, be sure to wear insulating protective equipment in accordance with the prescribed work standards.
◇Also, before using the device, carefully inspect the handle for any cracks or other abnormalities, and if you find any, immediately stop using it, report the issue, and arrange for prompt repair to ensure safe operation.◇Do not extend pipes or other parts onto the handle.
◇Do not apply more than the maximum operating torque. This may cause deformation or damage.
◇Ensure that the ratchet and pawl are properly engaged before use. If there is any wear or damage, have it repaired immediately.

Attention

★Please be sure to read the attached “Instruction Manual” before use.
★Specifications may be changed without notice due to product improvements.

The post Nagaki Seiki Benri Latch first appeared on Kouei Japan Trading | Get Quotation.

Nagaki Seiki Tension Meter

kvt part2 — Wed, 03 Jun 2020 08:39:18 +0000

Manufacturer: Nagaki Seiki Co., Ltd.

We offer a wide range of analog tension meters with operating tensions from 1KN to 100KN, as well as a more accurate, lighter, more compact, and easier-to-operate digital tension meter.
These tension meters focus primarily on compactness and light weight, and engineers developed them to manage tension in applications such as overhead lines, ensuring efficiency while maintaining ease of installation and operation.

Safety Precautions

Do not use beyond the rated load.
This product is a static load measuring instrument; please use it in a way that avoids impact loads.
Do not use for lifting or lowering operations.
Always check that the needle is stopped at the stopper position before use.
Use connecting fittings appropriate for the maximum working tension of the tension meter.

Attention

★Please be sure to read the attached “Instruction Manual” before use.
★Specifications may be changed without notice due to product improvements.

The post Nagaki Seiki Tension Meter first appeared on Kouei Japan Trading | Get Quotation.

Nagaki Seiki Kammler

kvt part2 — Wed, 03 Jun 2020 08:28:58 +0000

Manufacturer: Nagaki Seiki Co., Ltd.

Please choose from Nagaki Seiki’s original lineup according to your needs.
Camlers allow for the installation of safety covers and replacement of the teeth (cams). (Except for some camlers)

Precautions regarding product handling

Please perform the following checks before use.

◇ Are the teeth (cams) worn? ◇ Are the teeth (cams) clogged? ◇ Is the spring tension sufficient? ◇ Is the main body straight? ◇ Is the wire centered on the cam gripping part?

☆The maximum working tension indicates the range of use for the Camler, not the maximum working tension of the applicable wire.
☆Depending on the applicable wire, breakage or deformation of the insulation may occur below the maximum working tension of the Camler. Please check before use.
☆If you use this product beyond its service life of 3 years, regardless of the frequency of use, be sure to have it inspected by the manufacturer and continue using it.

Attention

★Please be sure to read the attached “Instruction Manual” before use.
★Specifications may be changed without notice due to product improvements.

The post Nagaki Seiki Kammler first appeared on Kouei Japan Trading | Get Quotation.

Nagaki Seiki Haru Wire Tensioner

kvt part2 — Wed, 03 Jun 2020 06:56:19 +0000

Manufacturer: Nagaki Seiki Co., Ltd.

Our lineup is extensive, ranging from wire tensioners that can be used for a wide range of applications from low to high tension, to belt tensioners that use fiber belts, and chain tensioners that are popular for strong tensioning work.

Precautions regarding product handling

◇ Always use the tensioner horizontally. Do not use it vertically, as it is dangerous.
◇ Replace the wire immediately if any strands break or kinks form.
◇ Always leave at least one turn of wire or belt remaining when performing tensioning work.
◇ If tension is released from the tensioner due to other factors while tension is applied, the brake may remain engaged in the pull-out (return) direction, preventing the handle from turning. In this case, reapply tension and use the rebound to return the handle to release the brake.
◇ When winding up, if you set the switch to “return” and wind in the reverse direction, the screw on the butterfly washer will break, so wind it correctly.

Attention

★Please be sure to read the attached “Instruction Manual” before use.
★Specifications may be changed without notice due to product improvements.

The post Nagaki Seiki Haru Wire Tensioner first appeared on Kouei Japan Trading | Get Quotation.