Type JWM-25 Tank Cleaning Gear

This type is the best choice for cleaning and can operate labor-saving.

Features

This type is compact and light.
This type can rotate spontaneously by the pressure of cleaning solution.
It can clean inside of tanks efficiently.
Designed for low or intermediate-pressure cleaning, this device operates without requiring high-pressure pumps.
It can also apply to hot-water and solvent cleaning.
Simple structure.
Price–performance ratio is excellent.
The rotation direction of the body is opposite to the screwed part, so it barely loosens.

Function

For automatic cleaning of various tanks and containers.
For automatic cleaning the inside of various equipment, rooms, or containers

Product Summary

Combined use with B-2 and B-3 class pumps achieves a drainage volume equivalent to about 2 units. The “Double Capacity Water Jet Eductor (DCER)” capable of speedy wastewater treatment uses the kinetic energy of the driving water to take in water from the water intake and It is a product that can increase the amount of wastewater when using .
In addition to shortening the time required for drainage, sludge and pebbles can also be sucked and discharged. Robust stainless steel body and nozzle for safe operation at high pressures. In addition, there is no driving part and no nozzle replacement is required.
In addition to shortening the time required for drainage, sludge and pebbles can also be sucked and discharged.

Features

Applicable to B-2 and B-3 grade pumps.
No need for a drive device or power supply other than the pump
Nozzle and body manufactured as one piece
Lightweight, compact and easy to handl

Features

In recent years, efforts to address environmental issues have become an integral part of corporate activities. Achieving zero emissions requires advanced treatment, incurring equipment and maintenance costs. How to keep running costs down is an issue for sludge treatment.Our company uses ozone for complete reactions, reducing excess sludge by 75% without emitting “exhaust ozone.” The “NIIKURA Onitoji” device significantly lowers sludge and running costs. Ozone also decolorizes wastewater and serves as a COD countermeasure for biogas power generation.

Features

This product is a device for high load, odor, and bulking countermeasures. Using “NIIKURA SHARDIS,” operators send air to the adjustment tank, efficiently dissolve oxygen in the sewage, and, with N-Hex around 1,200 mg/ℓ, dispense with the pressurized flotation device, eliminate chemicals, save costs, and reduce maintenance. Retrofitting is easy, and you can actually set up a demo unit and check the effects.

Features

This product solves the problem of clogging, which is a drawback of in-line mixers, with a structure that has no internal intersections, and exhibits high mixing performance through turbulent mixing.
Industries such as petroleum refining, petrochemical, pharmaceutical, food, and paper widely use this product as an easy-to-maintain mixing stirrer.

Features

Will be the installation in front of the Nozzle and pump.
You can eliminate the hassle and extra plumbing installed in the curved portion of the pipe.

Features

Will be the installation in front of the nozzle and pump.
Installation in space-saving is possible.
You can also use it in portrait.

Features

This product is the dust removal equipment to use various lines.
It is more economically at compact and lightweight.
They maximize the element’s usable passage area.

Features

This strainer, you can change the material according to the fluid for the steel plate.
They have adopted the wedge wire element (SUS316) as the standard. The industrial water and seawater making it the most suitable structure.
Depending on the SS of fluid, you can change the backwash system.
The standard of flange connection is JIS-10K.

Features

This strainer is a steel scraping backwash strainer.
As rust measures of body, both inside and outside surface applying a resin coating that is equal SUS equivalent. As strainer of seawater intake, it does not matter if is used in coastal areas.
Wedge wire element is standard.
The standard of flange connection is JIS-10K.

Features

They carry out the washing using multi-washing stages, brushing, scraping, and backwashing.
Horizontal type of the body display excellent performance in discarding of suspended solids like stripped films.
Easy overhauling and checking of the element and the rotary brush.
No requiring for the air purge.
Assuring of safety with none of extruded revolving parts.

Features

The strainer is steel 2 cylinder type switching filter.They characterize their own switching mechanism.
Cleaning of the element without having to stop the filtered fluid in the left and right of the handle switching operation, so you can communicate. Since they do not require cock raising, they set the short path to nil.
You can mount the element in the wire mesh, notch wire, and paper.
The standard of flange connection is JIS-10K.

Features

Will be the installation in front of the nozzle and pump
It is possible to let the stable by making the groundfloor and the body
You can reduce the cleaning frequency can be used to leach more trash compared to the T-type and Y-type.

Features

The area of one side angle 25°(360°rotation) is capable for fixing with spray nozzle remaining on the same position.
The angle and way of spray can be a little bit adjustment.

Function

After set up of spray nozzle, the machine is still can adjust the angle of spray a little bit if you want.
Can change the angle of spray water if want to decenterizing within 25° of the set up position.

Features

This type can apply to small insertion holes which internal diameter is 50mm and 80mm.
There are models for the whole inner surface, upper part, lower part.
This type can spray under a wide coverage.

Function

As cleaning equipment for inner walls of tower tanks and inside of containers.
As CIP equipment for fermentation tanks, undiluted solution tanks, or food and beverage tanks.
This equipment is used for chemical cleaning of the inner walls of reaction tanks or polymerization tanks.
As cleaning equipment for inner walls of lining tanks

Type FG4 Full Cone Fog Jet Spray Nozzle

This type is a combination of 7 type EX4 and can spray out a full cone shape entirely.

Features

Drops are small and this type can apply to large rate of flow.
This type can spray under a wide coverage.

Function

Cooling for an atmosphere of tower equipment, and containers.
Cleaning for inner walls of tower equipment, and containers.
As gas exhaustion equipment for dust removal and collection.
As anti-disaster equipment

Type SPR Sprinkler Spray Nozzle

This type is a combination of 4 type EX6 and can spray rotatably by the self-pressure.

Features

This type is compact and operates easily.
This type can rotate spontaneously without other driving equipment.
It can spray for inside of containers entirely.

Function

Cleaning for inner walls of tower equipment, and containers.
As the best chemical cleaning equipment for CIP of fermentation tanks, undiluted solution tanks, or food and beverage tanks or for chemical tanks.

Sprinkler Spray Nozzle

The combination of 2 Type DFN nozzle with self-pressured.

Features

This nozzle can work without drive device because of self- self-pressured.
The longest outer diameter 45mm can be used on small insertion hole.

Main Finction

Can be used on the Inner diameter of container is shorter than 2m.
It is best for chemical cleaning of fermenter tank, stock tank , food and beverage storage tank

Type FN-BW Flat Super Wide Aangle Spray Nozzle

This type causes the liquid coming out of nozzle orifice to hit the deflector and thus displays a flat spray in a super wide angle.

Features

The nozzle orifice is made of Poly Tetra Fluoro Ethylene (PTFE), which can minimize the clogging of contaminants.
The nozzle orifice contains backwash structure, which can prevent from clogging when contaminants sticking on the nozzle.
Impact is weaker than type EX6 and droplet is bigger.
This type can comply with the low pressure.

Function

As sewage treatment equipment or waste liquid discharging treatment equipment for defoaming of aeration tanks

Type EX6 Flat Spray Nozzle

This type sprays in a flat fan shape through the special-designed outlet orifice, which is without internal vane.

Features

This type which is without internal vane, can refrain from clogging.
The impact is big and the droplets are also big.
The spray angle is 90° under 0.2MPa. However, the spray angle will be wider as the water pressure higher.
This type sprays steadily under large range of pressure.
Additionally, it can also spray under every rate of flow.

Function

As disaster prevention equipment and the cooling equipment for the surface or the top of containers.
This equipment functions as cooling and cleansing machinery for continuous casting facilities, steel materials, and steel plates.
As cleaning equipment for all industries

Type EX6-W Flat Wide Angle Spray Nozzle

This type sprays in a flat fan shape with a wide angle through the special-designed outlet orifice, which is without internal vane.

Features

This type which is without internal vane, can refrain from clogging.
The impact is big and the droplets are also big.
The spray angle is 90° under 0.2MPa. However, the spray angle will be wider as the water pressure higher.
This type sprays steadily under large range of pressure.

Function

As disaster prevention equipment and the cooling equipment for the surface or the top of containers.
This equipment functions as cooling and cleansing machinery for continuous casting facilities, steel materials, and steel plates.
As cleaning equipment for assembly lines.
As sewage treatment equipment for defoaming

Type EX6-N Flat Narrow Angle Spray Nozzle

This type sprays in a flat fan shape with a narrow angle through the special-designed outlet orifice, which is without internal vane.

Features

This type which is without internal vane, can refrain from clogging.
The impact is big and the droplets are also big.
The spray angle is 90° under 0.2MPa. However, the spray angle will be wider as the water pressure higher.
This type sprays steadily under large range of pressure.

Function

As disaster prevention equipment and the cooling equipment for the surface or the top of containers.
Functioning as water curtain equipment for height.
As cleaning equipment for high pressure washing

Type FN Flat Super Wide Angle Spray Nozzle

This type causes the liquid coming out of nozzle orifice to hit the deflector and thus displays a flat spray in a super wide angle.

Features

This type which is without internal vane, can refrain from clogging.
Because it sprays from external deflector, the impact is weaker than type EX6 and droplets are smaller.
This type can comply with the low pressure.

Function

As sewage treatment equipment for defoaming of aeration tanks.
Functioning as disaster prevention and cooling equipment for the surface or top of containers.
As low pressure cleaning or spray equipment for assembly lines

Type DFN Drencher Flat Super Wide Angle SP

This type sprays in a flat fan shape with a super wide angle through the special-designed outlet orifice.

Features

This type sprays steadily under large range of pressure.
The impact is bigger than type FN.

Function

As disaster prevention equipment and the cooling equipment for the surface or the top of containers.
As water curtain equipment for low places or downward spray

Type S Flat Spray Nozzle

This type sprays in a flat fan shape through the special-designed outlet orifice. Additionally, the rate of flow is smaller than EX6.

Features

This type can be overhauled to nozzle tip, body, cap, and strainer. In addition, the nozzle tip can be changed separately.
We provide several kinds of nozzle tip in various spray flow and spray angle.
This type sprays steadily under large range of pressure.

Function

As cooling and cleaning equipment for continuous casting facility, steel material and steel plat.
As cooling, cleaning, coating, and spread equipment for assembly lines.

Type FNCW Flat Super Wide Angle Spray Nozzle

This type sprays in a flat fan shape with a super wide angle through the special-designed outlet orifice.

Features

Users can easily clean the outlet orifice by moving the waving part when it becomes clogged.
This type is the best choice for defoaming.
Because this type is made from engineering plastic, it has an excellent resistance to corrosion and it is hard to be clogged.
Furthermore, the structure is simple, light, and easy to operate.

Function

As sewage treatment equipment or waste liquid discharging treatment equipment for defoaming of aeration tanks.
For producing surface flow to prevent from larvae and algaes.

Type EX2-SQ Hollow Cone Wide Angle Spray Nozzle Share

This nozzle sprays out a full pyramid shape through the special-designed internal vane which is certified as a patent.

Features

This type can comply with low pressure.
The impact is somewhat weaker than type EX2.
The droplets are big.

Function

TAs sewage treatment equipment for defoaming.
As anti-disaster facilities and Cooling equipment for containers’ external surfaces.
As any cleaning equipment

Type EX4-SQ -Full Cone Square Spray -Nozzle

This nozzle sprays out a full pyramid shape through the special-designed internal vane which is certified as a patent.

Features

This type can comply with large range of pressure, and can also spray steadily.
The impact is somewhat weaker than type EX2-SQ.

Function

As the cooling and cleansing equipment for continuous casting facility, steel material and steel plate.
As any cleaning equipment

Type EX5-L Hollow Cone Spray Nozzle

This type is spiral construction without internal vane and sprays in a hollow cone shape.

Features

Without internal vane and no occurrence of clogging.
Droplet is somewhat smaller than type EX4.

Function

The disaster prevention equipment for cooling and absorption of smoke and gas exhaustion.
Cleaning of air, gas, etc.
Spray of liquefied gas, annealing, cooling.
The sewage treatment equipment and waste liquid discharging treatment device for the sludge incineration.
Cooling for an atmosphere of tower equipment, and containers

This nozzle sprays in a hollow cone shape through our original internal vane.

Features

This type can atomize a small amount of liquid by fluid pressure.
As a nozzle which can spray only by liquid pressure, this type can spray out the smallest droplets.

Function

For humidity control, air conditioning.
Spray drying.
Fuel spray.

Type EX5 Hollow Cone Mist Spray Nozzle

This type sprays in a full cone shape through the special-designed outlet orifice, which is without internal vane.

FEATURES

This type which is without internal vane, can refrain from clogging.
The structure of this type is easy to operate.
This type can apply to large range of pressure.
Droplets are big but the impact is weak.

FUNCTION

As anti-disaster facilities.
As defoaming equipment for aeration tanks.
For drug solution spray.
As spray equipment for liquid filled with impurities, such as treated water or circulating water.
As sludge dehydration equipment.
Functioning as sludge incineration treatment equipment.
As rubbish incineration treatment equipment.
As deodorants equipment.
Functioning as scum crushing equipment, this device effectively eliminates scum buildup.
As waste liquid treatment equipment

Type EX4 Full Cone Spray Nozzle

This nozzle sprays out a full cone shape entirely in wide angle.
Additionally, the internal vane is with patent.

 Features

This type sprays in a full cone shape and sprays entirely.
The impact is bigger than type EX2.
The drop size is somewhat smaller than EX2.
This nozzle can apply to every rate of flow.

Function

Functioning as anti-disaster facilities and cooling equipment for the surfaces of bullet-shaped containers.
This equipment functions as gas exhaustion equipment for dust removal and collection.
As the cooling and cleansing equipment for continuous casting facility, steel material and steel plate.
As annealing or cooling equipment for liquefied gas spread process.
This serves as production equipment for various types of gas.
As industrial equipment for cleaning machines

Full Cone Wide Aagle Spray Nozzle Type EX2

This nozzle sprays out a full cone shape entirely in wide angle.
Additionally, the internal vane is with patent.

 Features

This type sprays in a full cone shape and sprays entirely.
The spray angle is 90° under 0.2MPa. However, the spray angle will narrow as the water pressure higher.
The impact smaller than type EX4.
The drop size is comparatively big.
This nozzle can apply to every rate of flow.

Function

Serving as anti-disaster facilities and cooling equipment for the external surfaces of containers.
This equipment functions as the cooling and cleansing system for continuous casting facilities, steel materials, and steel plates.
As the disaster prevention equipment for cooling and absorption of smoke and gas exhaustion.
As the sewage treatment equipment and waste liquid discharging treatment device for the sludge incineration.
For mixing process of medicine and liquid medicine.

Type EX2 Full Cone Wide Aagle Spray Nozzle

This nozzle sprays out a full cone shape entirely in wide angle.
Additionally, the internal vane is with patent.

Features

This type sprays in a full cone shape and sprays entirely.
The spray angle is 90° under 0.2MPa.
(However, the spray angle will narrow as the water pressure higher.)
Droplets are big.

 Function

For preventing from dust of ores and crushed stones.
For cleaning of huge tower containers.
As the disaster prevention equipment for cooling and absorption of smoke and gas exhaustion.
As the sewage treatment equipment and waste liquid discharging treatment device for the sludge incineration.
For mixing process of medicine and liquid medicine.

Functions

This device is a maintenance mixer, crucial for petroleum refining, petrochemistry, medicine, food, paper manufacturing, nuclear power, and waste disposal. Additionally, the operation of this device is easy.
In operation, this device blends solutions with varying gravity, viscosity, temperature, and components, installed at the bottom of various solution tanks. Especially, for solution contains slurry, suspended matters, sediment, and solid materials.

Functions

The Swing Joint on tank bottoms allows the swing pipe to move, enabling suction of liquid from specific positions for transfer outside the tank.
The tank nozzle connects to the tank’s inner wall flange, while the swing pipe connects to the suction pipe flange.

Functions

This device serves as a pressure relief valve, installed on storage tanks, equipment, and piping to instantly release large volumes of air.
This device can instantly emit a large amount of vapor when internal pressure becomes abnormally high.
Therefore , it can protect tanks from damaging caused by overpressures.

Functions

This device is installed at the top of storage tanks as the vent hole for the ventilation with the atmosphere.

Functions

Users install this device on the top of storage tanks as an orifice for sounding, thermometry, sampling, etc.
For pipes: 100A～200A
Type: screwed or flange joint

Functions

People install this device as a non-return valve on the top of rainwater drainage pipes, ensuring effective operation. It can lead rainwater above roof tanks to flow out in cooperation with rainwater pipes which are in the tanks.
If there are some abnormal conditions, such as damage of rainwater drainage pipes, the solution in the tank will gush out through the pipe. Therefore, this device can operates as a non-return valve to prevent plants or the surrounding environment of the plants from damage and disaster.

Functions

This device prevents plant damage from explosive gas backfires, ensuring safety and reliability.Therefore, people use this type as an anti-disaster device.
When the temperature reaches the set point, the fuse metal melts, closing the valve and shutting down the gas stream.