Nikki Co., Ltd. | Kouei Japan Trading | Get Quotation

Nikki NLW Series Flat Type

kvt part2 — Tue, 11 Aug 2020 09:08:52 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLW Series

Features

The NLW series was developed as interior lighting for large machinery.
By using a constant current IC circuit, we have achieved a constant brightness even if the voltage fluctuates, and a longer LED lifespan.
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and has high insulation properties, making it ideal for in-flight lighting.
The LEDs are from a globally reliable manufacturer, and the body is made of aluminum with a tempered glass front, making it a sturdy design that is unlikely to break.

Application Examples

Large machine lighting, industrial machine lighting, facility machine lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃ to 40℃ (but do not freeze)
Protection rating	IP67
power cable	3m (VCTF0.5mm2 ^x2C )
Compliance standards

option	Body color: Silver
	Oil-resistant cable
	Cable Cover
	AC/DC adapter (ND-PM247) + jack processing
	Cable with switch (ND-SW01)

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLW40C-DC	2,800lm	3,600lx	DC24V	28W
NLW80C-DC	5,400lm	6,700lx		56W
NLW40C-DC-S	2,500lm	2,200lx		28W
NLW80C-DC-S	4,500lm	3,200lx		56W

If you require AC100-240V power, please select the AC/DC adapter.

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLW40C	290	280
NLW80C	490	480

Model selection method

Model	size	power supply	Glass	option
NLW	40C 80C	DC = DC24V	No symbol = transparent glass S = Ground glass (diffusion type)	Body color: Silver Oil-resistant cable Cable Cover AC/DC adapter (ND-PM247) Cable with switch (ND-SW01)

The post Nikki NLW Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLF Series Flat Type

kvt part2 — Tue, 11 Aug 2020 08:53:04 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLF Series

Features

By using a constant current IC circuit, we have achieved a constant brightness even when there are voltage fluctuations and a longer LED lifespan.
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and has high insulation properties, making it ideal for in-flight lighting.
A globally reliable manufacturer supplies the LEDs, and we make the body from aluminum with a tempered glass front, creating a sturdy design that is unlikely to break.
With a slim design of just 41mm wide, it is ideal for use in small spaces.

Application Examples

Small machine lighting, industrial machine lighting, facility machine lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃～40℃
Protection rating	IP67
power cable	3m (AWG26x2C)
Compliance standards

option	Body color: Silver
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Angle adjustment mounting bracket (ND-P02)
	Mounting magnet (ND-P03)
	AC/DC adapter (ND-PM243) + jack processing
	Cable with switch (ND-SW01)

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLF13C-DC	850lm	1,340lx	DC24V	7W
NLF26C-DC	1,510lm	2,360lx		13W
NLF13S-DC	550lm	310lx		8.5W
NLF26S-DC	1,130lm	620lx		17W

Products marked with ◇ are made to order.
*The total luminous flux is the actual measured value.
*The total luminous flux value is for standard color (5700K).

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLF13C/NLF13S	330	320
NLF26C/NLF26S	590	580

Flange Type

Model/Dimensions (mm)	A	B	C
NLF13CF/NLF13SF	364	330	304
NLF26CF/NLF26SF	624	600	564

Model selection method

Model	size	LED	Appearance	power supply	Glass	lens	option
NLF	13 26	C = High Power LED type S = Mid Power LED type	No symbol = standard shape F = flange shape	DC = DC24V	No symbol= transparent glass S = Ground glass (diffusion type)	[When LED=C] No symbol = with lens [When LED=S] No symbol = no lens	Body color: Silver Oil-resistant cable Fluorine packing Cable cover (outer shape = standard shape only) Angle adjustment mounting bracket (ND-P02) Mounting magnet (ND-P03) AC/DC adapter (ND-PM243) Cable with switch (ND-SW01)

The post Nikki NLF Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLE-SN3 Series Flat Type

kvt part2 — Tue, 11 Aug 2020 08:22:26 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLE-SN3 Series

Features

Our proprietary special lens design increases the light distribution angle to 37 degrees, further improving the light concentration and greatly increasing the direct illumination.
In addition, there are no multi-shadows and flickering is kept to less than 2%
By using a constant current IC circuit and a uniquely designed protection circuit, we have achieved a long LED life and high insulation properties.
The body is made of aluminum and the front is made of tempered glass, making it a sturdy design that is difficult to break.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃～40℃
Protection rating	IP67
power cable	3m (VCTF0.5mm2 ^x2C )
Compliance standards

option	Body color: Silver
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Angle adjustment mounting bracket (ND-P01)
	Mounting magnet (ND-P04)
	AC/DC adapter (ND-PM243) + jack processing
	Cable with switch (ND-SW01)

Comparison between conventional LED and NLE-SN3 series

Left: Conventional LED
When illuminating a shiny metallic surface, multiple shadows are generated by each LED, which not only causes eye fatigue but also interferes with visual inspection and image confirmation.
Right: NLE13SN3-DC
The uniform light illuminates the surface, allowing visual inspection and image confirmation without being affected by the light source, and also reduces eye fatigue.

Illuminance measurement of NLE13SN3-DC

Distance to workpiece of 500lx or more

Model	distance
NLE13SN3-DC	1.9m

*The JIS Z9110:2010 standard requires that the illuminance of the work surface in the workplace be 500lx or more to meet the work environment lighting standards.

Illuminance Data

Illuminance data for NLE13SN3-DC

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLE13SN3-DC	1,300lm	1,900lx	DC24V	9W
NLE26SN3-DC	2,100lm	3,150lx	DC24V	16W

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLE13SN3	330	320
NLE26SN3	530	520

Flange Type

Model/Dimensions (mm)	A	B	C	D
NLE13SNF3	360	340	300	40
NLE26SNF3	560	540	500	35

Model selection method

Model	size		Appearance		power supply	option
NLE	13 26	SN	No symbol = standard shape F = flange shape	3	DC = DC24V	Body color: Silver Oil-resistant cable Fluorine packing Cable cover (outer shape = standard shape only) Angle adjustment mounting bracket (ND-P01) Mounting magnet (ND-P04) AC/DC adapter (ND-PM243) Cable with switch (ND-SW01)

The post Nikki NLE-SN3 Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLE-SN2 Series Flat Type

kvt part2 — Tue, 11 Aug 2020 07:26:27 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLE-SN2 Series

Features

The specially designed reflective structure enhances the light concentration, resulting in a light distribution angle of 50 degrees, improving the direct illumination.
Additionally, we install a diffusion sheet on the front to reduce reflections from the subject and produce soft, natural light without glare.
Thanks to the constant current IC circuit and uniquely designed protection circuit, it has a long life and high insulation properties.
We make the body from aluminum and the front from heat-treated glass, creating a sturdy design.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *We determine the life when the illumination level drops to 70% of its initial value.
Operating temperature	-10℃～40℃
Protection rating	IP67
power cable	3m (VCTF0.5mm2 ^x2C )
Compliance standards

option	Body color: Silver
	Wavelength: 591nm
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Angle adjustment mounting bracket (ND-P01)
	Mounting magnet (ND-P04)
	AC/DC adapter (ND-PM243) + jack processing (24W)
	AC/DC adapter (ND-PM247) + jack processing (60W)
	Cable with switch (ND-SW01)

Comparison example between conventional LED and NLE-SN2 series

Conventional LED
When illuminating a shiny metallic surface, each LED produces streaks, which not only tire the eyes but also interfere with visual inspection and image confirmation.
NLE-SN2 series
The light evenly illuminates the surface, allowing for visual inspection and image confirmation without being affected by the light source, and preventing eye strain as well.

Conventional LED
Conventional products have the glare that is particular to LEDs, and not only are they difficult to see due to the multiple shadows they produce, but they also cause eye strain due to light reflections.
NLE-SN2 series
This product eliminates multi-shadows and avoids the glare or strong light reflection typical of LEDs in conventional products, ensuring that your eyes do not get tired even during long periods of use.

Illuminance simulation for NLE-SN2 series

Distance to workpiece of 500lx or more

Model	A (distance)
NLE10SN2-DC	1.08m
NLE13SN2-DC	1.42m
NLE26SN2-DC	1.82m
NLE36SN2-DC	2.48m

*The JIS Z9110:2010 standard requires that the illuminance of the work surface in the workplace be 500lx or more to meet the work environment lighting standards.

Illuminance Data

NLE10SN2-DC

NLE13SN2-DC

NLE26SN2-DC

NLE36SN2-DC

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLE10SN2-DC	640lm	590 lx	DC24V	6W
NLE13SN2-DC	1,000lm	1,010lx		9W
NLE26SN2-DC	1,810lm	1,660lx		17W
NLE36SN2-DC	3,100lm	3,100lx		32W

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLE10SN2	180	170
NLE13SN2	330	320
NLE26SN2	530	520
NLE36SN2	730	720

Flange Type

Model/Dimensions (mm)	A	B	C	D
NLE10SNF2	210	190	150	40
NLE13SNF2	360	340	300	40
NLE26SNF2	560	540	500	35

Model selection method

Model	size		Appearance		power supply	option
NLE	10 13 26 36	SN	No symbol = standard shape F = flange shape	2	DC = DC24V	Body color: Silver Oil-resistant cable Fluorine packing Cable cover (outer shape = standard shape only) Wavelength: 591nm Angle adjustment mounting bracket (ND-P01) Mounting magnet (ND-P04) AC/DC adapter (ND-PM243) AC/DC adapter (ND-PM247) Cable with switch (ND-SW01)

The post Nikki NLE-SN2 Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLE Series Flat Type

kvt part2 — Tue, 11 Aug 2020 06:38:54 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLE Series

Features

By using a constant current IC circuit, we have achieved a constant brightness even if the voltage fluctuates, and a longer LED lifespan.
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and has high insulation properties, making it ideal for in-flight lighting.
A globally reliable manufacturer produces the LEDs, and the body features an aluminum construction with a tempered glass front, creating a sturdy design that is unlikely to break.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *The illumination level determines the life when it drops to 70% of the initial illumination level.
Operating temperature	-10℃～40℃
Protection rating	IP67
power cable	3m (VCTF0.5mm2 x2C )
Compliance standards

Option	Body color: Silver
	Wavelength: 591nm
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Angle adjustment mounting bracket (ND-P01)
	Mounting magnet (ND-P04)
	AC/DC adapter (ND-PM243) + jack processing (24W)
	AC/DC adapter (ND-PM247) + jack processing (60W)
	Cable with switch (ND-SW01)

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLE10CN-DC-L1	800lm	1,100lx	DC24V	7W
NLE13CN-DC-L1	1,000lm	1,700lx		10W
NLE20CN-DC	1,500lm	1,850lx		15W
NLE26CN-DC	1,900lm	3,500lx		20W
NLE40C-DC	3,150lm	4,000lx		28W
NLE10SN-DC	600lm	220lx		7W
NLE13SN-DC	770lm	300lx		10W

We make products marked with “made to order.”
*If you require AC100-240V power, please select the AC/DC adapter.

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLE10CN/NLE10SN	180	170
NLE13CN/NLE13SN	330	320
NLE20CN	330	320
NLE26CN	530	520
NLE40C	530	520

Flange Type

Model/Dimensions (mm)	A	B	C	D
NLE10CNF/NLE10SNF	210	190	150	40
NLE13CNF/NLE13SNF	360	340	300	40
NLE20CNF	360	340	300	40
NLE26CNF	560	540	500	35
NLE40CF	560	540	500	35

Model selection method

Model	size	LED	Appearance	power supply	Glass	lens	option
NLE	10 13 20 26 40	CN = High Power LED type (size = 40 only “C” notation) SN = Mid Power LED type (sizes = 10, 13 only)	Customized= standard shape F = flange shape	DC = DC24V	No symbol= transparent glass S = Ground glass (diffusion type)	[When LED=CN/C]L1 =10CN/13CN with integrated lens No code = 20CN/26CN/40C with single lens [When LED=SN]No symbol = no lens	Body color: Silver Oil-resistant cable Fluorine packing Cable cover (outer shape = standard shape only) Wavelength: 591nm Angle adjustment mounting bracket (ND-P01) Mounting magnet (ND-P04) AC/DC adapter (ND-PM243) AC/DC adapter (ND-PM247) Cable with switch (ND-SW01)

The post Nikki NLE Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLM-SN2 Series Cylindrical Waterproof LED Light

kvt part2 — Tue, 11 Aug 2020 04:09:11 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLM-SN2 Series

Features

The NLM-SN2 series features a unique design that minimizes typical LED multi-shadows, delivering natural light. With identical mounting holes to the conventional NLM series and flexible options like magnetic mounting, it’s ideal for replacing fluorescent lamps, the NLL series, or for use as in-flight lighting.
Its housing uses high-transparency borosilicate glass, and the nylon 66 (30% glass fiber reinforced) bracket ensures durability. A specially designed protection circuit offers strong insulation against inrush currents and surges, while a constant current IC circuit prevents flicker and extends LED lifespan.
Unlike the all-around light diffusion of the NLM series, the NLM-SN2 concentrates brightness directly below—doubling the direct illuminance.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.
Comparison example between conventional LED and NLM-SN2 series

Since the light illuminates the surface evenly, visual inspection and image confirmation can be performed without being affected by the light source, and eyes are not strained either.

Left: Conventional LED
Conventional products have the glare that is particular to LEDs, and not only are they difficult to see due to the multiple shadows they produce, but they also cause eye strain due to light reflections.
Right: NLM-SN2 series
This product does not have multi-shadows, nor does it have the glare or strong light reflection that is typical of LEDs in conventional products, so your eyes will not get tired even when used for long periods of time.

Specification

Color Temperature	5,700K
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃～40℃
Outer Tube Material	Glass tube
Protection rating	IP67
power cable	DC: 3m(VCTF0.5mm ² x2C) AC: 3m(VCTF0.75mm ² x2C)
Compliance standards

Option	Outer tube material: Polycarbonate tube
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Metal mounting bracket (NC-562B)
	Mounting magnet (ND-P04)
	2m cable with plug (2M+P)

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLM10SG-DC-SN2	710lm	720lx	DC24V	5.5W
NLM10SG-AC-SN2	710lm	720lx	AC100-240V	5.5W
NLM20SG-DC-SN2	1,050lm	1,050lx	DC24V	7.5W
NLM20SG-AC-SN2	950lm	950lx	AC100-240V	7.5W
NLM30SG-DC-SN2	1,900lm	1,800lx	DC24V	15W
NLM30SG-AC-SN2	1,900lm	1,800lx	AC100-240V	15W

Main dimensions

Model/Dimensions (mm)	A	B
NLM10SG-DC/AC-SN2	310	300
NLM20SG-DC/AC-SN2	500	490
NLM30SG-DC/AC-SN2	690	680

Model selection method

Model	size	Outer tube	power supply		option
NLM	10S 20S 30S	G= Glass P=Polycarbonate	DC= DC24V AC= AC100-240V *Please use a single-phase AC power source.	SN2	Polycarbonate Tube Oil-resistant cable Fluorine packing Cable Cover Metal mounting bracket (NC-562B) Mounting magnet (ND-P04) 2m cable with plug (2M+P) Compatible power supply is AC 100-120V only. When selecting, please specify (2M+P) at the end of the model name.

The post Nikki NLM-SN2 Series Cylindrical Waterproof LED Light first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLM Series Cylindrical Waterproof LED Light

kvt part2 — Tue, 11 Aug 2020 02:48:45 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLM Series

Features

The housing is made of a highly light-transmitting glass tube, and the strong bracket made of glass fiber is used, resulting in a robust design.
By using a constant current IC circuit, it maintains a constant brightness even with voltage fluctuations, eliminates flickering, and also extends the LED’s lifespan.
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and has high insulation properties, making it ideal for in-flight lighting.
The LEDs are supplied by globally reliable manufacturers.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	DC: -10℃ to 40℃ AC: -10℃ to 40℃ (but do not freeze)
Outer Tube Material	Glass tube
Protection rating	IP67
power cable	DC: 3m (VCTF0.5mm ² x2C) AC: 3m (VCTF0.75mm ² x2C)
Compliance standards

option	Outer tube material: Polycarbonate tube
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Metal mounting bracket (NC-562B)
	Mounting magnet (ND-P04)
	2m cable with plug (2M+P)

Standard Model List

Model	power supply	Total luminous flux	Illuminance (1m)	Power Consumption
NLM10SG-DC	DC24V	1,230lm	370lx	8W
NLM10SG-AC	AC100-240V	1,240lm	360lx	8W
NLM20SG-DC	DC24V	2,490lm	760 lx	18W
NLM20SG-AC	AC100-240V	2,330lm	700lx	16W
NLM30SG-DC	DC24V	3,730lm	1,120lx	27W
NLM30SG-AC	AC100-240V	3,410lm	1,040lx	26W
NLM40SG-DC	DC24V	5,000lm	1,480lx	37W
NLM40SG-AC	AC100-240V	4,680lm	1,400lx	33W

*For a 2m cable with plug, please specify (2M+P) at the end of the model number. Compatible power supply is AC100-120V.

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLM10SG-DC/AC	310	300
NLM20SG-DC/AC	500	490
NLM30SG-DC/AC	690	680
NLM40SG-DC/AC	880	870

Model selection method

Model	size	Outer tube	power supply	option
NLM	10S 20S 30S 40S	G = Glass P = Polycarbonate	DC = DC24V AC = AC100-240V *Please use a single-phase AC power source.	Polycarbonate Tube Oil-resistant cable Fluorine packing Cable Cover Metal mounting bracket (NC-562B) Mounting magnet (ND-P04) 2m cable with plug (2M+P) Compatible power supply is AC 100-120V only. When selecting, please specify (2M+P) at the end of the model name.

The post Nikki NLM Series Cylindrical Waterproof LED Light first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLL3-SN2 Series Cylindrical Waterproof LED Light

kvt part2 — Tue, 11 Aug 2020 02:29:26 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLL3-SN2 Series

Features

The NLL3-SN2 series features a unique design that reduces LED multi-shadows for more natural lighting. Compatible with conventional fluorescent lamp mounts and NLL/NLL3 dimensions, it allows easy replacement. Ideal for in-flight use, it has a robust borosilicate glass housing and reinforced nylon 66 brackets. A specialized protection circuit resists inrush currents and surges, while a constant current IC prevents flicker and extends LED life. Compared to the NLL3’s diffused light, the NLL3-SN2 offers approximately three times the direct illumination.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.
Comparison example between conventional LED and NLL3-SN2 series

Left: Conventional LED
When illuminating a shiny metallic surface, each LED produces streaks, which not only tire the eyes but also interfere with visual inspection and image confirmation.
Right: NLL3-SN2 series
Since the light evenly illuminates the surface, it allows for visual inspection and image confirmation without being affected by the light source, preventing eye strain as well.

Left: Conventional LED
Conventional products have the glare that is particular to LEDs, and not only are they difficult to see due to the multiple shadows they produce, but they also cause eye strain due to light reflections.
Right: NLL3-SN2 series
This product eliminates multi-shadows and avoids the glare or strong light reflection typical of LEDs in conventional products, ensuring that your eyes do not get tired even during prolonged use.

Specification

Color Temperature	5,700K
Expected Life	Operating temperature: 40℃ 40,000 hours *We determine the life when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃～40℃
Outer Tube Material	Glass tube
Protection rating	IP67
power cable	DC: 3m (VCTF0.5mm ² x2C) AC: 3m (VCTF0.75mm ² x2C)
Compliance standards

option	Outer tube material: Polycarbonate tube
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Metal mounting bracket (NC-562B)
	Plastic mounting bracket (NC-565)

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLL3-13SG-DC-SN2	900lm	850lx	DC24V	9W
NLL3-13SG-AC-SN2	900lm	850lx	AC100-240V	8W
NLL3-36SG-DC-SN2	1,700lm	1,600lx	DC24V	17W
NLL3-36SG-AC-SN2	1,700lm	1,600lx	AC100-240V	17W

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLL3-13SG-DC/AC-SN2	389	415
NLL3-36SG-DC/AC-SN2	674	700

With NC-565 (optional)

Model/Dimensions (mm)	A	B	C
NLL3-13SG-DC/AC-SN2	389	435	445
NLL3-36SG-DC/AC-SN2	674	720	730

Model selection method

Model	size	Outer tube	power supply		option
NLL3	13S 36S	G = Glass P = Polycarbonate	DC = DC24V AC = AC100-240V *Please use a single-phase AC power source.	SN2	Polycarbonate Tube Oil-resistant cable Fluorine packing Cable Cover Metal mounting bracket (NC-562B) Plastic mounting bracket (NC-565)

The post Nikki NLL3-SN2 Series Cylindrical Waterproof LED Light first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLL3 Series Cylindrical Waterproof LED Light

kvt part2 — Tue, 11 Aug 2020 01:57:30 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLL3 Series

Features

This is a waterproof LED light suitable for lighting the inside of machine tools.
While maintaining the same pitch as the conventional fluorescent cabin lighting NLL series, the main body has been changed to a ø58 glass tube, making it slimmer and more reasonably priced.
It has excellent insulation properties and is designed to be resistant to electrostatic discharges, radiated magnetic field noise, and voltage fluctuations such as surges and momentary power outages.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃ to 40℃ (but do not freeze)
Outer Tube Material	Glass tube
Protection rating	IP67
power cable	DC: 3m (VCTF0.5mm ² x2C) AC: 3m (VCTF0.75mm ² x2C)
Compliance standards

option	Condenser lens (lot production)
	Outer tube material: Polycarbonate tube
	Oil-resistant cable
	Fluorine packing
	Cable Cover
	Metal mounting bracket (NC-562B)
	Plastic mounting bracket (NC-565)

Standard Model List

Model	power supply	Total luminous flux	Illuminance (1m)	Power Consumption
NLL3-13CG-DC	DC24V	900lm	280lx	8W
NLL3-13CG-AC	AC100-240V
NLL3-18CG-DC	DC24V	1,250lm	380lx	12W
NLL3-18CG-AC	AC100-240V
NLL3-36CG-DC	DC24V	2,000lm	610lx	18W
NLL3-36CG-AC	AC100-240V
NLL3-40CG-DC	DC24V	2,700lm	780lx	24W
NLL3-40CG-AC	AC100-240V

Main dimensions

Standard

Model/Dimensions (mm)	A	B
NLL3-13CG-DC/AC	389	415
NLL3-18CG-DC/AC	489	515
NLL3-36CG-DC/AC	674	700
NLL3-40CG-DC/AC	1,470	1,496

With NC-565 (optional)

Model/Dimensions (mm)	A	B	C
NLL3-13CG-DC/AC	389	435	445
NLL3-18CG-DC/AC	489	535	545
NLL3-36CG-DC/AC	674	720	730
NLL3-40CG-DC/AC	1,470	1,516	1,526

Model selection method

Model	size	LED	Outer tube	power supply	lens	option
NLL3	13 18 36 40	C\ = High Power LED type	G = Glass P = Polycarbonate	DC = DC24V AC = AC100-240V	No symbol = no lens L = With lens (lot production)	Polycarbonate Tube Oil-resistant cable Fluorine packing Cable Cover Metal mounting bracket (NC-562B) Plastic mounting bracket (NC-565)

The post Nikki NLL3 Series Cylindrical Waterproof LED Light first appeared on Kouei Japan Trading | Get Quotation.

Nikki NLUP Series Flat Type

kvt part2 — Tue, 11 Aug 2020 01:13:04 +0000

Manufacturer: Nikki Co., Ltd.
Model: NLUP Series

Features

Waterproof functionality has been added to this surface-emitting lighting that does not have the glare typical of LEDs.
It emits natural light so your eyes won’t get tired even if you use it for a long time. It also has little light reflection, making it ideal as an inspection light.
By using a constant current IC circuit, we have achieved a constant brightness even if the voltage fluctuates, and a longer LED lifespan.
It has a uniquely designed protection circuit that can handle inrush currents, surges, and momentary power outages, and has high insulation properties, making it ideal for in-flight lighting.
The LEDs are supplied by globally reliable manufacturers.

Application Examples

In-machine lighting for machine tools, industrial machinery lighting, facility machinery lighting, etc.

Specification

Color Temperature	5,700K
Body color	black
Expected Life	Operating temperature: 40℃ 40,000 hours *Life is determined when the illumination level drops to 70% of the initial illumination level.
Operating temperature	-10℃ to 40℃ (but do not freeze)
Protection rating	IP67
power cable	3m (VCTF0.5mm2 ^x2C )
Compliance standards

Option	Body color: Silver
	Cable Cover
	Angle adjustment mounting bracket (ND-P01)
	Mounting magnet (ND-P06)
	AC/DC adapter (ND-PM243) + jack processing (24W)
	AC/DC adapter (ND-PM247) + jack processing (60W)
	Cable with switch (ND-SW01)

Comparative Example

A shadow is created when illuminated with a conventional LED (left), but the NLUP (right) is less likely to create a shadow.

Standard Model List

Model	Total luminous flux	Illuminance (1m)	power supply	Power Consumption
NLUP05-DC	480lm	260lx	DC24V	5.8W
NLUP10-DC	800lm	410lx		12W
NLUP20-DC	1,130lm	580lx		19W
NLUP05T-DC	690lm	380lx		12W
NLUP10T-DC	1,300lm	700lx		23W
NLUP20T-DC	2,570lm	1,430lx		37W
NLUP2-20-DC	2,570lm	1,350lx		37W

*If you require AC100-240V power, please select the AC/DC adapter.
*Options (ND-P01/ND-P06) cannot be used with NLUP2-20-DC.

Main dimensions

Model/Dimensions (mm)	A	B	C	D
NLUP05/05T	220	205	75	30
NLUP10/10T	395	380	75	30
NLUP20/20T	540	525	75	30
NLUP2-20	540	525	115	60

Model/Dimensions (mm)	A	B	C
NLUP05F/05TF	280	260	220
NLUP10F/10TF	455	432	395
NLUP20F/20TF	600	576	540

Model selection method

Model	size	light source	Appearance	power supply	option
NLUP	05 10 20 2-20	No symbol = single-sided emission T = double-sided emission	No symbol = standard shape F = flange shape	DC = DC24V	Body color: Silver Cable cover (outer shape = standard shape only) Angle adjustment mounting bracket (ND-P01) Excluding NLUP2-20-DC Mounting magnet (ND-P06) Excluding NLUP2-20-DC AC/DC adapter (ND-PM243) AC/DC adapter (ND-PM247) Cable with switch (ND-SW01)

The post Nikki NLUP Series Flat Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki Grip

kvt part2 — Thu, 23 Apr 2020 07:30:48 +0000

Manufacturer: Nikki Co., Ltd.

What is a Machinery Handle?

This grip is made of phenolic resin (bakelite).
*The 1010 series is a resin grip with a hexagonal socket at the tip of the screw.

Specification

Grip Material	Phenolic resin (Bakelite)
Thread Material	Steel
Color	Black

Main dimensions

Grip (female thread type) 1140 series

Model/Dimensions (mm)	A	B	C	D	E
1140-18-M6	18	M6	40	twenty two	15
1140-21-M6	twenty one	M6	50	twenty five	17
1140-21-M8	twenty one	M8	50	35	17
1140-23-M8	twenty three	M8	65	51	19
1140-23-M10	twenty three	M10	65	52	19
1140-26-M10	26	M10	80	55	twenty one

Hexagonal Socket Grip (Male Thread Type) 1010 Series

Model/Dimensions (mm)	A	B	C	D	E	F
1010-18-M6	18	M6	40	12	3	10
1010-21-M6	twenty one	M6	50	13	3	10
1010-21-M8	twenty one	M8	50	13	4	10
1010-23-M8	twenty three	M8	65	14	4	13
1010-23-M10	twenty three	M10	65	14	5	13
1010-26-M10	26	M10	80	16	5	13

The post Nikki Grip first appeared on Kouei Japan Trading | Get Quotation.

Nikki Knob

kvt part2 — Thu, 23 Apr 2020 07:26:03 +0000

Manufacturer: Nikki Co., Ltd.

What is a Machinery Handle?

The knob is multi-sided, making it easy to grip and turn.

Specification

Material	Glass Fiber Reinforced Nylon
Shaft Material	Steel
color	Black

Main dimensions

Seven Knob (Female Thread Type) 6020 Series

Model/Dimensions (mm)	A	B	C	D	E	F
6020-25-M5	twenty five	M5	16	9.5	8	12
6020-25-M6	twenty five	M6	16	9.5	8	12
6020-32-M6	32	M6	20	12	10	14
6020-40-M6	40	M6	twenty five	14	13	18
6020-40-M8	40	M8	twenty five	14	13	18
6020-50-M8	50	M8	32	18	17	twenty two
6020-50-M10	50	M10	32	18	17	twenty two
6020-63-M10	63	M10	39	twenty two	twenty one	26
6020-63-M12	63	M12	39	twenty two	twenty one	26

Seven Knob (Male Thread Type) 6050 Series

Model/Dimensions (mm)	A	B	C	D	E
6050-25-M6-10	twenty five	M6	10	16	12
6050-25-M6-15	twenty five	M6	15	16	12
6050-25-M6-20	twenty five	M6	20	16	12
6050-32-M6-15	32	M6	15	20	14
6050-32-M6-20	32	M6	20	20	14
6050-32-M6-30	32	M6	30	20	14
6050-40-M8-20	40	M8	20	twenty five	18
6050-40-M8-30	40	M8	30	twenty five	18
6050-40-M8-40	40	M8	40	twenty five	18
6050-40-M8-50	40	M8	50	twenty five	18
6050-50-M8-20	50	M8	20	32	twenty two
6050-50-M8-30	50	M8	30	32	twenty two
6050-50-M8-40	50	M8	40	32	twenty two
6050-50-M10-20	50	M10	20	32	twenty two
6050-50-M10-30	50	M10	30	32	twenty two
6050-50-M10-40	50	M10	40	32	twenty two

The post Nikki Knob first appeared on Kouei Japan Trading | Get Quotation.

Nikki Machinery Handle

kvt part2 — Thu, 23 Apr 2020 06:50:18 +0000

Manufacturer: Nikki Co., Ltd.

What is a Machinery Handle?

Lightweight and inexpensive nylon handle.
The handle is easy to hold and doesn’t feel cold even in winter, making it gentle on your hands.

Specification

Material	Glass Fiber Reinforced Nylon
color	Black

Main dimensions

1211 series (square type)

Model/Dimensions (mm)	A	B	C	D	E
1211-94-BK	twenty one	94	6.5	40	13
1211-117-BK	26	117	8.5	41	15
1211-132-BK	27	132	8.5	45	16
1211-179-BK	28	179	8.5	50	17
1211-235-BK	31	235	10.5	54	twenty one

The post Nikki Machinery Handle first appeared on Kouei Japan Trading | Get Quotation.

Nikki DIN Rail

kvt part2 — Thu, 23 Apr 2020 06:40:49 +0000

Manufacturer: Nikki Co., Ltd.

What is DIN rail?

This is a metal rail that is commonly used when installing relays, timers, sequencers, breakers, and other devices used in control panels.
DIN is the abbreviation for German Industrial Standards (official name: Deutsches Institutfur Normung), which is equivalent to Japan’s JIS (Japanese Industrial Standards). It is also called the international standard “IEC rail.”

How to use DIN rails

The rail itself has pre-drilled mounting holes, making it easier to attach and remove than if each part were attached with screws, reducing construction and maintenance labor.

Material and size

The material is aluminum, and the DIN rails that are often used inside control panels are 35 mm wide.
In addition, since it follows the standard, the dimensions are uniform across DIN rails from all manufacturers.

Specification

Material	aluminum
length	1000mm
width	35mm
height	7.5mm
Hole Size	20×5mm

Main dimensions

Standard

The post Nikki DIN Rail first appeared on Kouei Japan Trading | Get Quotation.

Nikki Wiring Duct

kvt part2 — Thu, 23 Apr 2020 06:36:26 +0000

Manufacturer: Nikki Co., Ltd.

What is a wiring duct?

A wiring duct is a duct made of metal or plastic used to protect, organize and house electric wires.
Our wiring duct is made of resin, has wire holes on the side, and has a sliding top cover. It is easy to install and can be fixed firmly, so it will not fall off. In addition, the joint surface is smooth, so it can be used safely.

How to use wiring ducts

The main body is U-shaped and has an open top. The wiring goes inside, and then the cover is attached to the top. There are slits on both sides of the main body so that the wiring can be pulled out from any direction.
In addition, the joint surfaces are smooth, making it safe to use.

Material and size

The material used is rigid polyvinyl chloride (PVC), which has excellent insulation properties, non-combustibility, and high temperature resistance.
There are 22 sizes available, with widths ranging from 15mm to 100mm and heights ranging from 25mm to 100mm .

Specification

Material	Hard polyvinyl chloride (PVC)
Compliance standards	RoHS

Standard Model List

Model	Width (mm)	Height (mm)	Length (mm)	Side hole (mm)
N-2545	twenty five	45	1700	8.0
N-2565	twenty five	65
N-3345	33	45
N-3365	33	65
N-4040	40	40
N-4060	40	60
N-4080	40	80
N-6060	60	60
N-6080	60	80
N-1525	15	twenty five	1000
N-2525	twenty five	twenty five
N-3333	33	33
N-33100	33	100
N-5050	50	50
N-50100	50	100
N-6545	65	45
N-7264	72	64
N-70100	70	100
N-8060	80	60
N-8080	80	80
N-10060	100	60
N-100100	100	100

The post Nikki Wiring Duct first appeared on Kouei Japan Trading | Get Quotation.

Nikki Junction Terminal Block

kvt part2 — Thu, 23 Apr 2020 06:27:22 +0000

Manufacturer: Nikki Co., Ltd.

What is a relay terminal block?

Technicians use this component to connect and relay cables to electrical devices such as breakers in a control panel.

How to use the relay terminal block

The 12-pole terminals can be easily disconnected depending on the application.
Simply insert the wires into both ends of the terminal and tighten the screws.
It can be used for wiring switchboards and various electrical appliances.

Material

Made of nylon 66, it has excellent heat and abrasion resistance.

Specification

Body Material	Nylon 66
Terminal Material	Nickel-plated brass
Operating temperature	-25℃～105℃
Voltage	300V
color	white
Flame retardant grade	UL94V-2(UL94V-0)
Compliance standards	CE, RoHS, REACH

Standard Model List

Model	standard	Applicable Cable		Screw Size	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	Current
Model	standard	Cross-Set	AWG	Screw Size	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	Current
NB-PA-8H-12L	8mm	1.5mm2	22-12 (single core/multi-core)	M2.6×5	96.2	17.0	14.5	8.2	2.9	2.8±0.1	20A
NB-PA-10H-12L	10mm	2.5mm ²	22-12 (single core) 14-10 (multi-core)	M3.0×6	117.2	20.2	16.8	10.0	3.6	3.4±0.1	30A
NB-PA-12H-12L	12mm	6mm ²	20-10 (single core/multi-core)	M3.5×7	140.7	23.8	19.0	12.0	3.9	4.2±0.1	35A
NB-PA-14H-12L	14mm	10mm ²	20-8 (single core/multi-core)	M4.0×9	158.0	25.6	25.0	13.5	4.4	5.0±0.1	50A

The post Nikki Junction Terminal Block first appeared on Kouei Japan Trading | Get Quotation.

Nikki Fixed Terminal Block

kvt part2 — Thu, 23 Apr 2020 06:04:37 +0000

Manufacturer: Nikki Co., Ltd.

What is a fixed terminal block?

Technicians often call it a terminal block, using it to connect and relay cables to electrical devices like breakers in control panels.
The mounting holes on both ends of the unit allow you to fix the screws, which helps organize the wiring. In addition, the transparent cover has numbers printed on it, which makes it easy to manage the wiring.

How to use fixed terminal blocks

When connecting multiple cables, technicians use fixed terminal blocks to clearly identify connections. Terminal blocks also simplify reconnections when relocating control panels and help isolate issues for easier troubleshooting.

Material

The body and cover use polycarbonate, the conductive plate uses nickel-plated brass, and the terminal screws use iron. It meets UL94V-2 (or V-0) flame retardant standards and resists ignition under a 10-second vertical gas flame. Mounting options include M3 and M4 screws, with 3, 4, 6, or 12 poles—choose based on your application.

Specification

Body and cover material	Polycarbonate
Conductive Plate Material	Nickel-plated brass
Terminal screw material	Iron
Flame retardant grade	UL94V-2(UL94V-0)
Compliance standards	RoHS

Standard Model List

Model	Number of poles	Length (mm)	Width (mm)	Height (mm)	Screw Size	Rating	color
N-1503	3	46.5	22.0	17.5	M3	600V-15A	black
N-1504	4	55.5
N-1506	6	73.5
N-1512	12	128.5
N-2503L	3	56.0	30.0	19.5	M4	600V-25A
N-2504L	4	68.0
N-2506L	6	92.0
N-2512L	12	164.0
N-3503	3	56.0	30.0	19.5	M4	600V-35A
N-3504	4	68.0
N-3506	6	92.0
N-3512	12	164.0

The post Nikki Fixed Terminal Block first appeared on Kouei Japan Trading | Get Quotation.

Nikki Nylon Cable Ties

kvt part2 — Thu, 23 Apr 2020 04:00:30 +0000

Manufacturer: Nikki Co., Ltd.

What are cable ties?

It is a wiring material mainly used to bundle wiring or multiple cables.
It is sometimes called a cable tie from the English translation “Cable tie”, but our product name is “cable tie”.

How to use cable ties

The basic use of cable ties is to bundle multiple wires together, such as multiple cables and wire hoses inside a control board, and also used to bundle cables for electronic devices in an ordinary home.
Bundling wires with cable ties also makes them look neater.

Precautions when bundling wires with cable ties

Do not tie tightly
When bundling cables, it is important not to tie them too tightly.
If you tie LAN cables too tightly, they may break.
Bundle them loosely so that there is a small gap between the cable tie and the cable.
Keep the cables free of dust
If dust accumulates between cables or cable ties, such as LAN cables, it may cause the cables to heat up and ignite, resulting in a fire.
How cable ties stay in place
If used properly, cable ties will not come off easily.
The way they stay in place is that when you insert the end of the cable tie into the head, the jagged part on one side of the tie catches on the prongs of the head halfway through. The jagged part has a barb like a fish hook, so it will move in the direction you tighten it, but will not move in the opposite direction and will not come off.
The jagged part of a cable tie is only on one side. Therefore, if you insert it in the wrong direction, it will not catch on the prongs of the head and will come off easily.

How to remove the cable tie

Cable ties are designed not to come off easily, so to remove them, cut them with scissors or something similar.
When cutting with scissors, it is recommended to use scissors with a thin and sharp blade as this makes it easier to cut and also makes it easier to insert the blade between the cable tie and the object being tied. If it is difficult to cut with scissors, use pliers. With pliers, even if there is no gap and you do not need to insert the blade between the object and the cable tie, you can cut it as long as the tip of the blade fits in.
When removing either method, be careful not to damage the object being tied. In the case of cables, damaging the coating can lead to accidents such as electric leakage and fire.

Is there any way to remove it without cutting it?

The jagged part of the band hooks onto the nail, so if you create a gap between the jagged part and the nail, you can pull it off.
If you have a flat-head screwdriver that fits into the nail and push in the jagged part that engages with the nail, you can move it, but be careful because you may damage the jagged part.
If you want to be able to remove the cable tie and reuse it multiple times, use a reusable cable tie.

Specification

For outdoors	Weather-resistant nylon 66
Indoor	Nylon 66
Operating temperature	-20℃～80℃

Deterioration and weather resistance of cable ties

Cable ties are very durable products, but they can deteriorate depending on external factors.
The main causes of deterioration are ultraviolet rays, load, dryness, heat, and direct sunlight. Plastics are particularly susceptible to damage from ultraviolet rays. UV rays cause discoloration and reduce tensile strength and elongation, leading to breakage.
If you want to use it near a window or outdoors, use the “black” weatherproof cable ties.
Outdoor cable ties increase UV resistance without compromising physical properties, allowing you to use them outdoors for farm work or near a window.

Model number	Width x Length (mm)	Maximum bundle diameter (mm)	Tensile strength (N)
N-25080	2.5×80	15	78.4
N-25100	2.5×100	twenty two	78.4
N-25165	2.5×165	43	78.4
N-25200	2.5×200	53	78.4
N-36150	3.6×150	35	176.4
N-36200	3.6×200	52	176.4
N-36250	3.6×250	65	176.4
N-36300	3.6×300	76	176.4
N-48160	4.8×160	42	215.6
N-48200	4.8×200	50	215.6
N-48250	4.8×250	74	215.6
N-48300	4.8×300	80	215.6
N-48368	4.8×368	102	215.6
N-48432	4.8×432	125	215.6
N-76300	7.6×300	80	539
N-76380	7.6×380	105	539

Model number	Width x Length (mm)	Maximum bundle diameter (mm)	Tensile strength (N)
N-25100U	2.5×100	twenty two	78.4
N-25120U	2.5×120	28	78.4
N-25200U	2.5×200	53	78.4
N-36150U	3.6×150	35	176.4
N-36200U	3.6×200	52	176.4
N-36250U	3.6×250	65	176.4
N-36300U	3.6×300	76	176.4
N-48160U	4.8×160	42	215.6
N-48200U	4.8×200	50	215.6
N-48250U	4.8×250	74	215.6
N-48300U	4.8×300	80	215.6
N-48368U	4.8×368	102	215.6
N-48432U	4.8×432	125	215.6
N-76300U	7.6×300	80	539
N-76368U	7.6×368	105	539

Repeatable cable ties

A repeating cable tie can be easily removed by pressing the lever attached to the claw, which creates a gap between the claw and the jagged part.
Since many computers are used in offices, it is useful for bundling cables, and the repeating type can be reused when replacing or changing the layout.

Model number	Width x Length (mm)	Maximum bundle diameter (mm)	Tensile strength (N)
NR-76250	7.6×250	65	222.41
NR-76300	7.6×300	80	222.41
NR-76370	7.6×370	108	222.41

Screw-on cable ties

Screw-on cable ties have a screw hole at the head, which can be used to screw them into a wall or ceiling.

Model number	Width x Length (mm)	Maximum bundle diameter (mm)	Tensile strength (N)
NM-36160	3.6×160	32	177.93
NM-48205	4.8×205	50	222.41
NM-48300	4.8×310	80	222.41
NM-48370	4.8×377	102	222.41

Push-type cable ties

Push-type cable ties are a type that can be fixed by pushing the head part into a panel or wall hole. If there is a hole, it can be installed without using tools.
In addition, the wings allow for stable installation even when pushed into the panel or wall.

Model number	Width x Length (mm)	Maximum bundle diameter (mm)	Tensile strength (N)
NP-25110	2.5×110	28	80
NP-48130	4.8×134	twenty five	222.41

The post Nikki Nylon Cable Ties first appeared on Kouei Japan Trading | Get Quotation.

Nikki Plug-In Wire Connector

kvt part2 — Sun, 19 Apr 2020 04:02:32 +0000

Manufacturer: Nikki Co., Ltd.

What is a plug-in type electrical connector?

The plug-in type wire connector is a tool-free connector that allows you to insert stripped wires and wire them.
Electricians typically connect wiring through a joint box, but by using a plug-in type wire connector, they can simplify conventional wiring methods.

Material

The main body is made of polycarbonate and the side material is nylon.
It is flame retardant to UL94V-0, so you can use it with confidence.
Manufacturers use stainless steel springs and highly conductive copper to make the conductors, enabling them to replace traditional wiring methods such as soldering.The number of poles is available as 2, 3, 4 or 5, and can be selected according to the application.

Specification

Body Material	Polycarbonate
Side Material	nylon
Heat Resistance Temperature	85℃
Rated voltage – rated current	450V-24A
Flame retardant grade	UL94V-2
Compliance standards	UL, CE, RoHS, REACH

Standard Model List

Model	Number of poles	Applicable wire	color
N-PC252-CL	2	1-2.5 ^mm2	red
N-PC253-CL	3		Orange
N-PC254-CL	4		yellow
N-PC255-CL	5		gray

The post Nikki Plug-In Wire Connector first appeared on Kouei Japan Trading | Get Quotation.

Nikki One-Touch Connector

kvt part2 — Sun, 19 Apr 2020 03:56:30 +0000

Manufacturer: Nikki Co., Ltd.

What is a one-touch connector?

The one-touch connector is a tool-free connector that allows wiring by simply inserting a stripped wire and fixing it with a lever.
It has a voltage test hole, so you can measure without disassembly.
The transparent housing lets you clearly see whether it is installed correctly.

Material

Manufacturers use polycarbonate (PC) to make the main body and nylon (polyamide PA) to make the lever.
It is flame retardant to UL94V-0, so you can use it with confidence.
Engineers use stainless steel springs and highly conductive copper to create the conductors, which serve as a replacement for traditional wiring methods like soldering.
The number of poles is available as 2, 3 or 5, and can be selected according to the application.

Specification

Body Material	Polycarbonate
Lever Material	Nylon (Polyamide PA)
Heat Resistance Temperature	105℃
Rated voltage – rated current	450V-32A
Flame retardant grade	UL94V-0
Compliance standards	UL, CE, PSE, RoHS, REACH

Standard Model List

Model	Number of poles	Applicable wire			color
Model	Number of poles	Single Line	Stranded wire	Flexible stranded wire	color
N-PC622	2	1.6/2.0mm	2.0/ ^3.5mm2	0.2 – ^4.0mm2	Orange
N-PC623	3
N-PC625	5

The post Nikki One-Touch Connector first appeared on Kouei Japan Trading | Get Quotation.

Nikki Closed End Connector

kvt part2 — Sun, 19 Apr 2020 03:51:26 +0000

Manufacturer: Nikki Co., Ltd.

What is a closed end connector?

By overlapping and crimping the wires, they are less likely to come loose even under vibration, and can be easily connected and insulated.
Technicians use it with a wide range of electrical appliances and wiring devices.

Material

The main body is made of nylon 66, which is flame retardant and heat resistant, and the inside is made of tin-plated copper, which allows electricity to flow easily.

Specification

Body Material	Nylon 66
Terminal Material	Copper Tin Plated
Flame retardant grade	UL94V-2
Heat Resistance Temperature	105℃
Compliance standards	UL, CSA, CQC, RoHS, REACH

Standard Model List

Model	A(mm)	B(mm)	C(mm)	Electrical Standards	Applicable Cable	color
N-NG-CE1	18.2	7.8	2.6	300V MAX	22-18 AWG 24-18 AWG	Transparent
N-NG-CE2I	20.0	9.5	3.3	300V MAX	22-14 AWG
N-NG-CE5I	25.5	12.5	4.4	300V MAX(UL,CSA) 600V MAX(CQC)	22-10 AWG 20-12 AWG
N-NG-CE8	27.7	14.3	5.3	300V MAX(UL) 600V MAX(CSA,CQC)	16-10 AWG

The post Nikki Closed End Connector first appeared on Kouei Japan Trading | Get Quotation.

Nikki Insulated Crimp Terminal

kvt part2 — Sun, 19 Apr 2020 03:31:43 +0000

Manufacturer: Nikki Co., Ltd.

What are crimp terminals?

Crimp terminals are necessary components for connecting electrical wires to electrical devices and transmitting electricity and signals.
Developed around 1925, before crimp terminals became widespread, soldering was the mainstream method of connection.

Benefits of using crimp terminals

In addition to using crimp terminals, other methods of connecting electrical wires to electrical devices include soldering or securing the connections with insulating tape.
However, connecting by soldering requires skill and there is a risk of burns.
Moreover, using insulating tape to secure wires can lead to short circuits and makes it difficult to organize wires of varying thicknesses, types, and standards neatly.With crimp terminals, you don’t have to worry about getting burned or connecting different electrical wires!

Insulated crimp terminals offered by our company

We offer two types of insulated crimp terminals: round/R-type and insulated crimp terminals (open tip/Y-type).
Insulated crimp terminal (round type/R type)
Insulated crimp terminal (open end/Y type)
When using it, it doesn’t actually matter which crimp terminal you choose.
Here we will introduce some selection points to help you choose the right crimp terminals more smoothly.

Selection points

1. “Round type/R-type” and “Open end type/Y-type”: The advantage of the “round/R type” is its safety.; On the other hand, the advantage of the “leading edge type/Y type” is that it is easy to work with.; Therefore, the key point in making a selection is whether to prioritize safety or ease of use.

	Advantages	×Disadvantages
Round/R type	It is a little cheaper than the tip-opening type, which is safer . Even if the screw loosens a little, it will still be attached. *Loosening to the point where the terminal floats may cause a spark.	Poor workability (e.g., screws must be completely removed before installation)
Open end type/Y type	Easy to use (e.g. no need to remove screws, can be installed immediately)	Less safe. Compared to the round type, it is a little more expensive. Ex. If the screw becomes loose, it will come off. Ex. There is a risk of direct contact with electricity.

2. Advantages and disadvantages of “isolation”: The advantage of “insulation” is that it can be installed anywhere.; Another advantage is that there is no need to insulate after installation, which saves you time and effort.; However, the disadvantage is that it is a little more expensive than a “bare” crimp terminal.; If you are inexperienced, it may be preferable to choose the “insulated” type.

	Advantages	×Disadvantages
insulation	Can be installed anywhere. No need to worry about insulation . Can be installed bare or with a lid.	It is more expensive than naked

It is often said that the choice of crimp terminals ultimately comes down to personal preference.
Technicians with more experience tend to use the system more intuitively and effortlessly.
However, when you are still inexperienced, you may not know what criteria to use.
If you have any questions or concerns about crimp terminals, please feel free to contact us.

Specification

Material	Oxygen-free copper (body) PVC (cap)
Rated voltage	600V
Quantity	100 pieces

Y-type main dimensions

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-SV1-3.2	1.25	M3	3.2	5.7	6.5	twenty one	10	4.0	1.7	0.75	0.5-1.5	22-16
N-SVS1-3.7		M3.5	3.7	5.7
N-SVS1-4		M4	4.3	6.4
N-SVM1-4		M4	4.3	7.2
N-SV2-3.2	2	M3	3.2	5.7				4.5	2.3	0.80	1.5-2.5	16-14
N-SVL2-3.7		M3.5	3.7	6.0
N-SVM2-4		M4	4.3	7.2

R type main dimensions

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-RV1-3.2	1.25	M3	3.2	5.5	5.0	17.5	10	4.0	1.7	0.75	0.5-1.5	22-16
N-RVM1-3.7		M3.5	3.7	6.6	6.3	19.4
N-RVS1-4		M4	4.3	6.6	6.3	19.4
N-RVL1-4		M4	4.3	8.0	7.0	20.8
N-RV1-5		M5	5.3	8.0	7.0	20.8
N-RVS2-4	2	M4	4.3	6.6	6.3	19.4		4.5	2.3	0.80	1.5-2.5	16-14
N-RVL2-4		M4	4.3	8.5	7.8	21.8
N-RVS2-5		M5	5.3	8.5	7.8	21.8

The post Nikki Insulated Crimp Terminal first appeared on Kouei Japan Trading | Get Quotation.

Nikki Bare Crimp Terminal

kvt part2 — Sun, 19 Apr 2020 02:57:55 +0000

Manufacturer: Nikki Co., Ltd.

What are crimp terminals?

Benefits of using crimp terminals

In addition to using crimp terminals, other methods of connecting electrical wires to electrical devices include soldering or securing the connections with insulating tape.
However, connecting by soldering requires skill and there is a risk of burns.
In addition, if you use insulating tape to secure the wires, there is a risk of short circuits, and it is difficult to neatly bundle together electrical wires of different thicknesses, types, and standards.
With crimp terminals, you don’t have to worry about getting burned or connecting different electrical wires!

Bare crimp terminals offered by our company

We offer two types of terminals: bare crimp terminals (round/R type) and bare crimp terminals (open tip/Y type).

Bare crimp terminal (round type/R type)

Bare crimp terminal (open end/Y type)
When using it, it doesn’t actually matter which crimp terminal you choose.
Here we will introduce some selection points to help you choose the right crimp terminals more smoothly.

Selection points

1. “Round type/R-type” and “Open end type/Y-type”: The advantage of the “round/R type” is its safety.; On the other hand, the advantage of the “leading edge type/Y type” is that it is easy to work with.; Therefore, the key point in making a selection is whether to prioritize safety or ease of use.

	Advantages	×Disadvantages
Round/R type	It is a little cheaper than the tip-opening type, which is safer . Even if the screw loosens a little, it will still be attached. *Loosening to the point where the terminal floats may cause a spark.	Poor workability (e.g., screws must be completely removed before installation)
Open end type/Y type	Easy to use (e.g. no need to remove screws, can be installed immediately)	Less safe. Compared to the round type, it is a little more expensive. Ex. If the screw becomes loose, it will come off. Ex. There is a risk of direct contact with electricity.

2. Advantages and disadvantages of “bare crimp terminals”: The advantage of “bare” is that it reduces work time and is cheaper than insulation.; However, if installed in an exposed location, there is a risk of direct contact with electricity, so you will need to insulate it with heat shrink tubing after installation, which requires extra work.

	Advantages	×Disadvantages
naked	Compared to insulation, which can shorten the work time , it is cheaper . For example, attach it to a place that cannot be touched directly, such as a lid.	Depending on the installation location, it may be necessary to insulate it later.

It is often said that the choice of crimp terminals ultimately comes down to personal preference.
It seems that the more experienced the technician is, the more intuitive and intuitive they are at using the system.
However, when you are still inexperienced, you may not know what criteria to use.
If you have any questions or concerns about crimp terminals, please feel free to contact us.

Specification

Material	Oxygen-free copper
Quantity	100 pieces

Y-type main dimensions

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-SNB1-3.2	1.25	M3	3.2	5.7	6.5	16.0	4.8	3.4	1.7	0.75	0.5-1.5	22-16
N-SNBS1-3.7		M3.5	3.7	5.7
N-SNBL1-3.7		M3.5	3.7	6.4
N-SNBS1-4		M4	4.3	6.4
N-SNBM1-4			4.3	7.2
N-SNBL1-4			4.3	8.1

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-SNB2-3.2	2	M3	3.2	5.7	6.5	16.0	4.8	4.1	2.3	0.80	1.5-2.5	16-14
N-SNBS2-3.7		M3.5	3.7	5.7
N-SNBL2-3.7		M3.5	3.7	6.4
N-SNBS2-4		M4	4.3	6.4
N-SNBM2-4			4.3	6.4
N-SNBL2-4			4.3	8.1
N-SNBS2-5		M5	5.3	8.1

R type main dimensions

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-RNB1-3.2	1.25	M3	3.2	5.5	5.0	12.5	4.8	3.4	1.7	0.75	0.5-1.5	22-16
N-RNBS1-3.7		M3.5	3.7	5.5	5.0	12.5
N-RNBM1-3.7		M3.5	3.7	6.6	6.3	14.4
N-RNBS1-4		M4	4.3	6.6	6.3	14.4
N-RNBL1-4		M4	4.3	8.0	7.0	15.8
N-RNB1-5		M5	5.3	8.0	7.0	15.8
N-RNB1-6		M6	6.4	11.6	11.0	21.8
N-RNB1-8		M8	8.4	11.6	11.0	21.8
N-RNB2-3.2	2	M3	3.2	6.6	4.8	12.8		4.1	2.3	0.80	1.5-2.5	16-14
N-RNBM2-3.7		M3.5	3.7	6.6	6.3	14.4
N-RNBS2-4		M4	4.3	6.6	6.3	14.4
N-RNBL2-4		M4	4.3	8.5	7.4	16.5
N-RNBS2-5		M5	5.3	8.5	7.4	16.5
N-RNBL2-5		M5	5.3	9.5	7.4	17.0
N-RNB2-6		M6	6.4	12.0	11.0	21.8
N-RNB2-8		M8	8.4	12.0	11.0	21.8

Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	Dimensions of each part (mm)								Conjugation range of fit
Model	Nominal cross-sectional area ( ^mm2 )	Stud diameter	ød2	W	F	L	E	øD	ød1	T	Stranded wire ^mm2	AWG
N-RNB3-4	3.5	M4	4.3	8.0	8.0	18.0	6.0	5.1	2.9	1.0	2.5-4	14-12
N-RNBM3-5		M5	5.3	9.5	9.2	20.0
N-RNB3-6		M6	6.4	12.0	9.4	21.4
N-RNB3-8		M8	8.4	15.0	13.3	27.0
N-RNBS5-4	5.5	M4	4.3	7.2	6.1	15.7		5.6	3.4		4-6	12-10
N-RNBL5-4		M4	4.3	9.5	8.3	19.0
N-RNB5-5		M5	5.3	9.5	8.3	19.0
N-RNB5-6		M6	6.4	12.0	10.5	22.5
N-RNB5-8		M8	8.4	15.0	13.3	27.0
N-RNB5-10		M10	10.5	15.0	13.3	27.0

The post Nikki Bare Crimp Terminal first appeared on Kouei Japan Trading | Get Quotation.

Nikki 90° Nylon Quick Connector

kvt part2 — Sat, 18 Apr 2020 03:57:30 +0000

Manufacturer: Nikki Co., Ltd.

What is a 90° nylon quick connector?

Please use together with unslit corrugated tube (N-GPA series). Secure the corrugated tube in place in precision machinery, control panels, etc. to protect wires and cables.
The material is nylon 66, which is dustproof and waterproof, and can be used in environments where it is exposed to coolant.

How to use 90° nylon quick connectors

Users install the connector at a 90-degree angle.
The snap-in sleeve allows for easy attachment and detachment. In addition, the included nut makes it easy to attach to the cable hole of a wall, etc.
Please select from M threads, PG threads, or G threads according to your application.

Specification

Color	Black
Material	Nylon 66, EPDM weather resistant rubber
Operating temperature range	-40℃～100℃
Compliance standards	UL, RoHS, REACH
Flame retardant grade	UL94V-2 (UL94V-0)

Flame retardant grade UL94 V-0/V-1/V-2

Test method: Vertical flame test (20 mm)
Technicians hold the test specimen (125 ± 5 mm long and 13.0 ± 0.5 mm wide) vertically and apply a 20 mm long flame to the bottom edge for 10 seconds. If the specimen burns for less than 30 seconds, they apply the flame again for another 10 seconds.

Certification Criteria

Certification Criteria	grade
Certification Criteria	V-0	V-1	V-2
Burn time for each specimen	10 seconds or less	30 seconds or less	30 seconds or less
Time to glow after second flame application	30 seconds or less	60 seconds or less	60 seconds or less
Total burning time of five test pieces	50 seconds or less	250 seconds or less	250 seconds or less
Ignition by dripping	none	none	can be
Burning to Clamp	none	none	none

The resin part of the cable gland is 66 nylon, and the rubber part is EPDM, which is UL94V-0.

Main dimensions (M thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GRTF-M12-10.0	M12x1.5	10.0	10.0	N-GPA-07
N-GRTF-M20-13.0	M20x1.5	10.0	13.0	N-GPA-09
N-GRTF-M16-15.8	M16x1.5	12.5	15.8	N-GPA-11
N-GRTF-M18-15.8	M18x1.5	12.5	15.8
N-GRTF-M20-15.8	M20x1.5	12.5	15.8
N-GRTF-M20-21.2	M20x21.2	13.0	21.2	N-GPA-16
N-GRTF-M25-28.5	M25x1.5	13.0	28.5	N-GPA-21
N-GRTF-M32-34.5	M32x1.5	14.5	34.5	N-GPA-29
N-GRTF-M40-42.5	M40x1.5	15.0	42.5	N-GPA-36

Main dimensions (PG thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GRTF-PG7-10.0	PG7	10.0	10.0	N-GPA-07
N-GRTF-PG9-13.0	PG9	10.0	13.0	N-GPA-09
N-GRTF-PG11-15.8	PG11	12.5	15.8	N-GPA-11
N-GRTF-PG16-21.2	PG16	13.0	21.2	N-GPA-16
N-GRTF-PG21-28.5	PG21	13.0	28.5	N-GPA-21
N-GRTF-PG29-34.5	PG29	14.5	34.5	N-GPA-29
N-GRTF-PG36-42.5	PG36	15.0	42.5	N-GPA-36

Main dimensions (G thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GRTF-G1/4-10.0	G(PF)1/4	10.0	10.0	N-GPA-07
N-GRTF-G3/8-13.0	G(PF)3/8	10.0	13.0	N-GPA-09
N-GRTF-G1/2-15.8	G(PF)1/2	12.5	15.8	N-GPA-11
N-GRTF-G1/2-21.2	G(PF)1/2	13.0	21.2	N-GPA-16
N-GRTF-G3/4-28.5	G(PF)3/4	13.0	28.5	N-GPA-21
N-GRTF-G1-34.5	G(PF)1	14.5	34.5	N-GPA-29
N-GRTF-G1 1/4-42.5	G(PF)1 1/4	15.0	42.5	N-GPA-36
N-GRTF-G2-54.5	G(PF)2	16.0	54.5	N-GPA-48

The post Nikki 90° Nylon Quick Connector first appeared on Kouei Japan Trading | Get Quotation.

Nikki Nylon Quick Connector

kvt part2 — Sat, 18 Apr 2020 03:39:59 +0000

Manufacturer: Nikki Co., Ltd.

What is a nylon quick connector?

Please use together with unslit corrugated tube (N-GPA series).
Technicians fix corrugated tubes to precision machinery, control panels, and other equipment to protect wires and cables. Manufacturers use nylon 66 to make these tubes, giving them dustproof and waterproof properties. This material also allows the tubes to perform reliably in environments exposed to coolant.

How to use nylon quick connectors

The snap-on sleeve makes it easy to put on and take off.
In addition, the nut allows users to easily fix the tube to a cable hole on a wall or similar surface.Please select from M threads, PG threads, or G threads according to your application.

Specification

Color	Black
Material	Nylon 66
Operating temperature range	-40℃～100℃
Compliance standards	UL, RoHS, REACH
Flame retardant grade	UL94V-2 (UL94V-0)

Flame retardant grade UL94 V-0/V-1/V-2

Test method: Vertical flame test (20 mm)
The test specimen (length 125±5mm x width 13.0±0.5mm) is held vertically and a 20mm long flame is applied to the bottom edge for 10 seconds.
If the burning continues for less than 30 seconds, the flame is applied for a further 10 seconds.

Certification Criteria

Certification Criteria	grade
Certification Criteria	V-0	V-1	V-2
Burn time for each specimen	10 seconds or less	30 seconds or less	30 seconds or less
Time to glow after second flame application	30 seconds or less	60 seconds or less	60 seconds or less
Total burning time of five test pieces	50 seconds or less	250 seconds or less	250 seconds or less
Ignition by dripping	none	none	can be
Burning to Clamp	none	none	none

The resin part of the nylon quick connector is 66 nylon, which is UL94 V-2.

Main dimensions (M thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GQTF-M12-10.0	M12x1.5	10.0	10.0	N-GPA-07
N-GQTF-M16-13.0	M16x1.5	10.0	13.0	N-GPA-09
N-GQTF-M18-13.0	M18x1.5	10.0	13.0
N-GQTF-M20-13.0	M20x1.5	10.0	13.0
N-GQTF-M16-15.8	M16x1.5	10.0	15.8	N-GPA-11
N-GQTF-M18-15.8	M18x1.5	12.5	15.8
N-GQTF-M20-15.8	M20x1.5	12.5	15.8
N-GQTF-M20-21.2	M20x1.5	13.0	21.2	N-GPA-16
N-GQTF-M25-28.5	M25x1.5	13.0	28.5	N-GPA-21
N-GQTF-M32-34.5	M32x1.5	14.0	34.5	N-GPA-29
N-GQTF-M40-42.5	M40x1.5	15.0	42.5	N-GPA-36
N-GQTF-M50-54.5	M50x1.5	16.0	54.5	N-GPA-48

Main dimensions (PG thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GQTF-PG7-10.0	PG7	10.0	10.0	N-GPA-07
N-GQTF-PG9-13.0	PG9	10.0	13.0	N-GPA-09
N-GQTF-PG11-15.8	PG11	12.5	15.8	N-GPA-11
N-GQTF-PG13.5-15.8	PG13.5	12.5	15.8	N-GPA-11
N-GQTF-PG16-21.2	PG16	13.0	21.2	N-GPA-16
N-GQTF-PG21-28.5	PG21	13.0	28.5	N-GPA-21
N-GQTF-PG29-34.5	PG29	14.0	34.5	N-GPA-29
N-GQTF-PG36-42.5	PG36	15.0	42.5	N-GPA-36

Main dimensions (G thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GQTF-G1/4-10.0	G(PF)1/4	10.0	10.0	N-GPA-07
N-GQTF-G3/8-15.8	G(PF)3/8	12.5	15.8	N-GPA-11
N-GQTF-G1/2-15.8	G(PF)1/2	12.5	15.8	N-GPA-11
N-GQTF-G1/2-21.2	G(PF)1/2	13.0	21.2	N-GPA-16
N-GQTF-G3/4-28.5	G(PF)3/4	13.0	28.5	N-GPA-21
N-GQTF-G1-34.5	G(PF)1	14.0	34.5	N-GPA-29
N-GQTF-G1 1/4-42.5	G(PF)1 1/4	15.0	42.5	N-GPA-36
N-GQTF-G2-54.5	G(PF)2	16.0	54.5	N-GPA-48

The post Nikki Nylon Quick Connector first appeared on Kouei Japan Trading | Get Quotation.

Nikki Corrugated Grand

kvt part2 — Sat, 18 Apr 2020 03:32:13 +0000

Manufacturer: Nikki Co., Ltd.

What is a corrugated gland?

Please use together with unslit corrugated tube (N-GPA series).
Corrugated tubes protect wires and cables by securing them to precision machinery, control panels, and other equipment. Made from nylon 66, they provide dustproof and waterproof protection, making them suitable for environments exposed to coolant.

How to use the corrugated gland

By tightening the sealing nut, the claws of the collet structure tighten the corrugated tube, preventing the intrusion of dust and water.
In addition, the included nut allows users to easily fix the tube to a cable hole on a wall or similar surface.Please select either M threads or PG threads according to your application.

Specification

Color	black
Material	Nylon 66, EPDM weather resistant rubber
Operating temperature range	-40℃～100℃
Protection rating	IP68
Compliance standards	UL, RoHS, REACH
Flame retardant grade	UL94V-2 (UL94V-0)

Flame retardant grade UL94 V-0/V-1/V-2

Certification Criteria

Certification Criteria	grade
Certification Criteria	V-0	V-1	V-2
Burn time for each specimen	10 seconds or less	30 seconds or less	30 seconds or less
Time to glow after second flame application	30 seconds or less	60 seconds or less	60 seconds or less
Total burning time of five test pieces	50 seconds or less	250 seconds or less	250 seconds or less
Ignition by dripping	none	none	can be
Burning to Clamp	none	none	none

The plastic part of the corrugated gland is 66 nylon, which is UL94 V-2, and the rubber part is EPDM, which is UL94 V-0.

Main dimensions (M thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GWTF-M12-10.0	M12x1.5	9.0	10.0	N-GPA-07
N-GWTF-M16-13.0	M16x1.5	15.0	13.0	N-GPA-09
N-GWTF-M20-13.0	M20x1.5	15.0	13.0	N-GPA-09
N-GWTF-M16-15.8	M16x1.5	15.0	15.8	N-GPA-11
N-GWTF-M20-15.8	M20x1.5	15.0	15.8	N-GPA-11
N-GWTF-M20-21.2	M20x1.5	15.0	21.2	N-GPA-16
N-GWTF-M25-28.5	M25x1.5	15.0	28.5	N-GPA-21
N-GWTF-M32-34.5	M32x1.5	15.0	34.5	N-GPA-29
N-GWTF-M40-42.5	M40x1.5	15.0	42.5	N-GPA-36

Main dimensions (PG thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GWTF-PG11-15.8	PG11	10.0	15.8	N-GPA-11
N-GWTF-PG13.5-15.8	PG13.5	10.0	15.8
N-GWTF-PG16-15.8	PG16	10.8	15.8
N-GWTF-PG16-21.2	PG16	13.0	21.2	N-GPA-16
N-GWTF-PG21-21.2	PG21	13.0	21.2	N-GPA-16
N-GWTF-PG21-28.5	PG21	13.0	28.5	N-GPA-21
N-GWTF-PG29-34.5	PG29	13.0	34.5	N-GPA-29
N-GWTF-PG36-42.5	PG36	13.0	42.5	N-GPA-36

Main dimensions (PF thread)

Model	Screw Specifications	Thread length (mm)	Applicable outer diameter (mm)	Suitable tube
N-GWTF-PF1/2-15.8	G(PF)1/2	15.0	15.8	N-GPA-11
N-GWTF-PF1/2-21.2	G(PF)1/2	15.0	21.2	N-GPA-16
N-GWTF-PF3/4-28.5	G(PF)3/4	15.0	28.5	N-GPA-21
N-GWTF-PF1-34.5	G(PF)1	15.0	34.5	N-GPA-29
N-GWTF-PF1 1/4-42.5	G(PF)1 1/4	15.0	42.5	N-GPA-36
N-GWTF-PF2-54.5	G(PF)2	15.0	54.5	N-GPA-48

The post Nikki Corrugated Grand first appeared on Kouei Japan Trading | Get Quotation.

Nikki Cable Glands

kvt part2 — Sat, 18 Apr 2020 02:59:12 +0000

Manufacturer: Nikki Co., Ltd.

What is a cable gland?

Secures and protects electrical wires and cables in precision machinery, control panels, etc.
The material is nylon 66, which is dustproof and waterproof, and can be used in environments where it is exposed to coolant.

How to use cable glands

When the sealing nut is tightened, the claws of the collet structure apply pressure to the internal seal, preventing the intrusion of dust and water.
In addition, since it comes with a nut, it can be easily fixed to a cable hole on a wall, etc.
Please select either M threads or PG threads according to your application.

Specification

Color	black
Material	Nylon 66, EPDM weather resistant rubber
Operating temperature range	-40℃～100℃
Protection rating	IP68
Compliance standards	UL, RoHS, REACH
Flame retardant grade	UL94V-2 (UL94V-0)

Flame retardant grade UL94 V-0/V-1/V-2

Certification Criteria

Certification Criteria	grade
Certification Criteria	V-0	V-1	V-2
Burn time for each specimen	10 seconds or less	30 seconds or less	30 seconds or less
Time to glow after second flame application	30 seconds or less	60 seconds or less	60 seconds or less
Total burning time of five test pieces	50 seconds or less	250 seconds or less	250 seconds or less
Ignition by dripping	none	none	can be
Burning to Clamp	none	none	none

The resin part of the cable gland is 66 nylon, and the rubber part is EPDM, which is UL94V-0.

Main dimensions (M thread)

Model	Applicable cable diameter (mm)	Thread outer diameter (mm)	Thread length (mm)
N-GNCG-M8-4.8	2–4.8	8	7.5
N-GNCG-M12-7	4–8	12	8.5
N-GNCG-M12L-7	4–8	12	15
N-GNCG-M16-10	5–10	16	10
N-GNCG-M16L-10	5–10	16	15
N-GNCG-M20S-12.5	6–12.5	20	10
N-GNCG-M20-13.5	8.5–14	20	11
N-GNCG-M20L-13.5	8.5–14	20	15
N-GNCG-M25L-18	12.5–18	twenty five	15

Main dimensions (PG thread)

Model	Applicable cable diameter (mm)	Thread outer diameter (mm)	Thread length (mm)
N-GNCG-PG7-7	4–8	12.5	8
N-GNCG-PG9-7.5	4–8	15.2	8.2
N-GNCG-PG11-10	5–10	18.6	10
N-GNCG-PG13.5-12.5	6–12.5	20.4	10
N-GNCG-PG16-14	8.5–14	22.5	10.8
N-GNCG-PG21-17.5	12.5–18	28.3	12
N-GNCG-PG29-25	17～25	37	12

The post Nikki Cable Glands first appeared on Kouei Japan Trading | Get Quotation.

Nikki Silicone Varnished Glass Braided Tube

kvt part2 — Sat, 18 Apr 2020 02:47:30 +0000

Manufacturer: Nikki Co., Ltd.

What is Silicone Varnished Glass Braided Tubing?

Manufacturers make this tube by weaving glass fiber and coating it with silicone varnish.
It has excellent voltage resistance, heat resistance, abrasion resistance, self-extinguishing properties, and flexibility.

How to use silicone varnished glass braided tubing

Users mainly use it to protect electric wires and cables. They also apply it widely for insulation protection in motors of automatic equipment, home appliances, electric heating devices, and internal wire harnesses in electronic equipment.

Material properties

Withstand voltage: Withstands a voltage of 1.5 kV and has high insulating strength, making it suitable for protecting cables around generators, transformers, and motors.
Heat resistantup to 200°C, it is suitable for use in harsh temperature environments and in heat-generating equipment such as motors.

Specification

Color	White
Material	Fiberglass filament, silicone varnish
Heat Resistance Temperature	-10℃～200℃
Withstand voltage	1.5kV
Flame retardant grade	VW-1

Main dimensions

Model	Inner diameter (mm)	Wall thickness (mm)
N-GF-15-1	1.0+0.20-0	0.35±0.12
N-GF-15-1.5	1.5+0.20-0	0.35±0.12
N-GF-15-2	2.0+0.20-0	0.35±0.12
N-GF-15-2.5	2.5+0.25-0	0.35±0.12
N-GF-15-3	3.0+0.25-0	0.35±0.12
N-GF-15-3.5	3.5+0.35-0	0.42±0.12
N-GF-15-4	4.0+0.35-0	0.42±0.12
N-GF-15-4.5	4.5+0.35-0	0.42±0.12
N-GF-15-5	5.0+0.35-0	0.42±0.12
N-GF-15-5.5	5.5+0.50-0	0.45±0.12
N-GF-15-6	6.0+0.50-0	0.45±0.12
N-GF-15-7	7.0+0.50-0	0.45±0.12

Model	Inner diameter (mm)	Wall thickness (mm)
N-GF-15-8	8.0+0.50-0	0.45±0.12
N-GF-15-9	9.0+0.50-0	0.45±0.12
N-GF-15-10	10.0+0.70-0	0.53±0.12
N-GF-15-12	12.0+0.70-0	0.53±0.12
N-GF-15-14	14.0+0.80-0	0.65±0.12
N-GF-15-16	16.0+0.80-0	0.65±0.12
N-GF-15-18	18.0+0.80-0	0.65±0.15
N-GF-15-20	20.0+0.80-0	0.65±0.15
N-GF-15-22	22.0+0.90-0	0.75±0.15
N-GF-15-25	25.0+0.90-0	0.75±0.15
N-GF-15-28	28.0+0.90-0	0.75±0.15
N-GF-15-30	30.0+0.90-0	0.75±0.15

The post Nikki Silicone Varnished Glass Braided Tube first appeared on Kouei Japan Trading | Get Quotation.

Nikki Braided Tube

kvt part2 — Sat, 18 Apr 2020 02:34:41 +0000

Manufacturer: Nikki Co., Ltd.

What is braided sleeving?

This is a highly elastic tube that expands to twice its diameter.
The material is PET (polyester yarn), so it is light, flexible, abrasion-resistant, and heat-resistant.

How to use braided sleeving

Its high elasticity makes it easy to pass cables through, even those with plugs or connectors, and makes it easy to protect the cables.
Engineers use it to protect cables in automated equipment and a wide range of industrial machinery.

Specification

Color	black
Material	PET (polyester yarn)
Temperature range	-40 to 150°C
Flame retardant grade	VW-1

Main dimensions

Model	Number of stitches	Number of careers	Folding width (mm)	Applicable size (mm)	Fiber Diameter	mesh
N-GE-PES 3.2	3	twenty four	3±2.0	2-7	0.20±0.02	9
N-GE-PES 6.4	3	32	6±2.0	3-9	0.20±0.02	8
N-GE-PES 9.5	3	48	10±3.0	6-16	0.20±0.02	8
N-GE-PES 12.7	3	48	13±2.0	8-24	0.20±0.02	8
N-GE-PES 19.1	3	72	19±3.0	14-28	0.20±0.02	8
N-GE-PES 32	3	96	32±3.0	20-43	0.25±0.02	8
N-GE-PES 40	3	120	40±3.0	25-48	0.25±0.02	7
N-GE-PES 50	5	120	60±3.0	40-70	0.25±0.02	6

The post Nikki Braided Tube first appeared on Kouei Japan Trading | Get Quotation.

Nikki PVC Tube

kvt part2 — Sat, 18 Apr 2020 02:28:39 +0000

Manufacturer: Nikki Co., Ltd.

What is PVC Tube?

This tube is made of polyvinyl chloride and has excellent insulation, flame retardancy, flexibility, and heat resistance, making it suitable for a wide range of applications.

How to use PVC tubes

It has a uniform thickness and is less likely to crack, making it suitable for wiring in narrow spaces or places where bending is required.
It is widely used for insulating and protecting automotive wire harnesses, motors, and electrical wire connections.

Specification

Color	Black
Material	PVC (Polyvinyl Chloride)
Operating temperature range	-30℃～105℃
Rated voltage	300V
Withstand voltage	14000V
Flame retardant grade	VW-1

Main dimensions

Model	Inner diameter (mm)	Wall thickness (mm)
N-GP-300V-9	3.00±0.20	0.44±0.15
N-GP-300V-8	3.38±0.20	0.44±0.15
N-GP-300V-7	3.76±0.20	0.44±0.15
N-GP-300V-6	4.22±0.30	0.44±0.15
N-GP-300V-5	4.72±0.30	0.44±0.15
N-GP-300V-4	5.28±0.50	0.44±0.15
N-GP-300V-3	5.94±0.50	0.44±0.15
N-GP-300V-2	6.68±0.50	0.44±0.15
N-GP-300V-1	7.47±0.50	0.44±0.15
N-GP-300V-0	8.38±0.50	0.44±0.15

Model	Inner diameter (mm)	Wall thickness (mm)
N-GP-300V-5/16	7.92±0.50	0.44±0.15

The post Nikki PVC Tube first appeared on Kouei Japan Trading | Get Quotation.

Nikki Mark Tube

kvt part2 — Sat, 18 Apr 2020 02:11:55 +0000

Manufacturer: Nikki Co., Ltd.

What is Mark Tube?

A printed tube used for wiring work on control panels. Mark means “marker,” and a marked tube is a tube that serves as a marker.

How to use the Mark Tube

Mark tubes have the role of preventing insulation and wiring errors and facilitating maintenance work.
Because they are attached to both ends of electric wires in one control panel, the number of marking tubes is generally an even number. Since the only thing you can rely on for wiring management is the printed letters and symbols, even small tubes play a very important role.

Material, size

The material is soft PVC (polyvinyl chloride), which is flame-retardant and soft.
There are six sizes available, with inner diameters ranging from 3mm to 6.2mm.

Characters to be printed

Usually, numbers/letters shown on electrical drawings are printed, but Chinese characters and symbols may also be printed. Since the wiring number is printed, it is sometimes called the wire number.
*If you have a tube printer, you can print on any manufacturer’s tubes.

Specification

Color	White
Material	Soft PVC (polyvinyl chloride)

Main dimensions

Model	Inner diameter (mm)	Material
NMT075	3.0	Soft PVC (polyvinyl chloride)
NMT125	3.2
NMT200	3.6
NMT350	4.2
NMT550	5.1
NMT800	6.2

The post Nikki Mark Tube first appeared on Kouei Japan Trading | Get Quotation.

Nikki Spiral Tube

kvt part2 — Sat, 18 Apr 2020 02:07:32 +0000

Manufacturer: Nikki Co., Ltd.

What is a spiral tube?

Spiral Tube is a tube with spiral slits that can be wrapped around electric wires and cables to prevent wear and tear on the wires and protect them.

How to use the spiral tube

Because it is soft and easy to wind, it can be used to organize wiring in an ordinary home, not just wiring in a control panel.
Corrugated tubes are also used for the same purpose, but the big difference is that they are easier to branch. Spiral tubes are used to bundle multiple cables together and branch off just one cable along the way.

Material, size, color

The material is polyethylene. It is soft and elastic, so it will not break even if bent, and it is easy to use on curved parts.
Sizes range from 4.0mm to 20.0mm inner diameter and are available in two colors: black and white.

Specification

color	Black/White
Material	PE (Polyethylene)

Main dimensions

Model	Inner diameter (mm)	Outer diameter (mm)	Pitch (mm)	Material
NST-06	4.0	6	7.0	PE (Polyethylene)
NST-08	6.0	8	10.8
NST-10	7.5	10	11.4
NST-12	9.0	12	13.9
NST-15	12.0	15	15.0
NST-19	15.0	19	18.2
NST-24	20.0	twenty four	19.6

The post Nikki Spiral Tube first appeared on Kouei Japan Trading | Get Quotation.

Nikki Corrugated Tube Without Slits

kvt part2 — Sat, 18 Apr 2020 01:52:53 +0000

Manufacturer: Nikki Co., Ltd.

What is a corrugated tube?

This is a resin component used to protect electric wires and cables.
Corrugate means “wave-shaped,” and a corrugated tube is a protective tube with a wave-shaped surface.

Features of corrugated tube (without slits)

It is strong and resistant to physical damage. It has little leakage of liquids and gases and prevents foreign objects from entering from the outside. However, it is flexible.With slitIt is inferior to , so it is not suitable for bending or folding.

How to use corrugated tubes

Corrugated tubes can be used for indoor and outdoor wiring, as well as for protecting outdoor antenna cables and watering hoses, and for protecting cables in the engine compartment of a car.

Material, size

(nylon)It has excellent weather resistance and is ideal for outdoor use as there is no need to worry about the wiring being damaged by ultraviolet rays from sunlight.8 types in total, with inner diameters ranging from 6.8mm to 47.0mm

Recommended points

Depending on your needs, you can purchase it in cut lengths of 10 metres or in longer lengths.

Specification

Color	Black
Material	NYLON
Operating temperature range	-10 to 100°C
Flame retardant grade	VW-1

Main dimensions

Model	Inner diameter (mm)	Outer diameter (mm)	Material	Suitable ground
N-GPA-07	6.8	10.0	NYLON	N-GWTF-M12-10.0
N-GPA-09	9.6	13.0		N-GWTF-M16-13.0 N-GWTF-M20-13.0
N-GPA-11	12.0	15.8		N-GWTF-M16-15.8 N-GWTF-M20-15.8
N-GPA-16	16.2	21.2		N-GWTF-M20-21.2
N-GPA-21	21.9	28.5		N-GWTF-M25-28.5
N-GPA-29	27.6	34.5		N-GWTF-M32-34.5
N-GPA-36	36.0	42.5		N-GWTF-M40-42.5
N-GPA-48	47.0	54.5		–

The post Nikki Corrugated Tube Without Slits first appeared on Kouei Japan Trading | Get Quotation.

Nikki Corrugated Tube With Slits

kvt part2 — Sat, 18 Apr 2020 01:31:19 +0000

Manufacturer: Nikki Co., Ltd.

What is a corrugated tube?

This is a resin component used to protect electric wires and cables.
Corrugate means “wave-shaped,” and a corrugated tube is a protective tube with a wave-shaped surface.

Features of corrugated tube (with slits)

The slit type is flexible, suitable for bending and folding, and has flexibility and elasticity. It is easy to handle and carry, but its strength is lowNo slits It is slightly inferior to the , and liquids or gases may leak from the slits.

How to use corrugated tubes

Corrugated tubes can be used for indoor and outdoor wiring, as well as for protecting outdoor antenna cables and watering hoses, and for protecting cables in the engine compartment of a car.

Material, size

There are two types of materials: polypropylene (PP) and nylon (NY).
Polypropylene
It is characterized by its durability and flexibility, and its inexpensiveness makes it suitable for use in a wide range of situations, making it ideal for indoor wiring.
A total of 10 types, ranging from inner diameter 5.4mm to inner diameter 32.4mm
Nylon
It has excellent weather resistance and is ideal for outdoor use as there is no need to worry about the wiring being damaged by ultraviolet rays from sunlight.
A total of 8 types, ranging from inner diameter 5.4mm to inner diameter 25.1mm

Recommended points

Depending on your needs, you can purchase it in cut lengths of 10 metres or in longer lengths.

Specification

color	black
Material	PP (Polypropylene) NYLON
Operating temperature range (PP)	-40 to 125°C
Operating temperature range (NY)	-10 to 100°C

Main dimensions

Model	Inner diameter (mm)	Outer diameter (mm)	Material
NCT-05PP	5.4	7.8	PP (Polypropylene)
NCT-07PP	7.4	10.2
NCT-10PP	10.7	14.1
NCT-13PP	13.2	17.5
NCT-16PP	15.9	19.2
NCT-19PP	19.3	23.8
NCT-22PP	22.1	27.0
NCT-25PP	25.1	30.0
NCT-28PP	28.2	34.0
NCT-32PP	32.4	38.0

Model	Inner diameter (mm)	Outer diameter (mm)	Material
NCT-05NY	5.4	7.8	NYLON
NCT-07NY	7.4	10.2
NCT-10NY	10.7	14.1
NCT-13NY	13.2	17.5
NCT-16NY	15.9	19.2
NCT-19NY	19.3	23.8
NCT-22NY	22.1	27.0
NCT-25NY	25.1	30.0

The post Nikki Corrugated Tube With Slits first appeared on Kouei Japan Trading | Get Quotation.

Nikki Magnetic Stand Type Coolant Nozzle

kvt part2 — Fri, 17 Apr 2020 09:37:44 +0000

Manufacturer: Nikki Co., Ltd.

Magnetic stand type coolant nozzle

This product has a hose for liquids such as coolant mounted on a magnetic base.
Since it is equipped with a magnet, it can be installed in any position, and the angle and direction of the nozzle itself can be freely adjusted, making it ideal for cooling metal processing machines.
The coolant nozzle part can be freely detached and attached using an assembly tool. The configuration can be freely rearranged in combination with the adjustable coolant nozzle 1/4″ system.

Applications

For cooling and removing chips during cutting.
Can be used during EDM, etc.

Magnetic stand type coolant nozzle (triple jet type)

Since it has three coolant nozzles, it can spray from three locations at the same time in three directions.
The amount of coolant sprayed can also be controlled by opening and closing the valve at the base.

Model: NM-C3

Nozzle Tip	Flare nozzle (diameter 1.7 x 25.4 mm)
Magnet Base	NM-B80
Each hose length	440mm
connection	1/8″ nipple

Components (each part x3)
82026 Connector
82021 Hose x25
82027 Flare nozzle

Magnetic stand type coolant nozzle (flare nozzle type)

Because the spray spreads over a wide area, it is effective for cleaning chips and cooling the grinding wheels used in grinding machines.
Products with valves allow you to manually control the spray of coolant by opening and closing the valve.

Model: NM-C1
Components
82026 Connector
82021 Hose x15
82027 Flare nozzle

Model: NM-C1-V
Components
82026 Connector
82722 Valve
82021 Hose x14
82027 Flare nozzle

Nozzle Tip	Flare nozzle (diameter 1.7 x 25.4 mm)
Magnet Base	ø40
Each hose length	NM-C1: 265mm
Each hose length	NM-C1-V: 280mm
connection	1/8″ nipple

Magnetic stand type coolant nozzle (ø1/8″ nozzle type)

Since it can be sprayed pinpoint-wise toward the blade, it is effective for cooling the cutting edge during cutting and grinding.
Products with valves allow you to manually control the spray of coolant by opening and closing the valve.

Model: NM-C1-A
Components
82026 Connector
82021 Hose x15
82023 Nozzle ø1/8″

Model: NM-C1-AV
Components
82026 Connector
82722 Valve
82021 Hose x14
82023 Nozzle ø1/8″

Nozzle Tip	Nozzle ø1/8″
Magnet Base	ø40
Each hose length	NM-C1-A: 269mm
Each hose length	NM-C1-AV: 284mm
connection	1/8″ nipple

Magnetic stand type coolant nozzle (multi-hole nozzle type)

The multiple nozzles allow for wide and uniform spraying.
Products with valves allow you to manually control the spraying of coolant by opening and closing the valve.

Model: NM-C1-B
Components
82026 Connector
82021 Hose x15
82228 Multi-hole nozzle
Model: NM-C1-BV
Components
82026 Connector
82722 Valve
82021 Hose x14
82228 Multi-hole nozzle

Nozzle Tip	Multi-hole nozzle (hole diameter ø1×16)
Magnet Base	ø40
Each hose length	NM-C1-B: 285mm
Each hose length	NM-C1-BV: 300mm
connection	1/8″ nipple

The post Nikki Magnetic Stand Type Coolant Nozzle first appeared on Kouei Japan Trading | Get Quotation.

Nikki Magnetic Base With Handle

kvt part2 — Fri, 17 Apr 2020 08:57:50 +0000

Manufacturer: Nikki Co., Ltd.

How to use the magnetic base with handle

It has an easy-to-hold T-shaped handle and can be used to transport metal items such as steel plates, nails, and chips.

Model	NM-8T
size	60 x 50 x 55 (H) mm
Maximum suction force	800N
Adhesive surface	Bottom (V-shaped)/Rear

Model	NM-12T
size	117 x 50 x 55 (H) mm
Maximum suction force	1,300N
Adhesive surface	Bottom (V-shaped)/Rear

The post Nikki Magnetic Base With Handle first appeared on Kouei Japan Trading | Get Quotation.

Nikki Magnet Base

kvt part2 — Fri, 17 Apr 2020 08:46:53 +0000

Manufacturer: Nikki Co., Ltd.

Magnet base features

Magnet material
Ferrite magnets are used, which are resistant to rust and impact and do not weaken easily.
Adhesive surface
As long as the V-shaped or concave magnet can be stably attached, it can be fixed to any surface, whether flat or curved.

How to use the magnet base

By attaching a jig that suits the intended use to the screw hole part, it can also be used for purposes other than measurement.
A standard magnet base. The adhesive force is 300N to 1500N, and it has an M screw hole so that you can attach a jig or arm according to your application.

Model	NM-B30
size	35 x 30 x 35 (H) mm
Screw Hole Dimensions	M5x0.8P
Maximum suction force	300N
Adhesive surface	Bottom (V-shaped)/Rear

Model	NM-B80
size	60 x 50 x 55 (H) mm
Screw Hole Dimensions	M8x1.25P
Maximum suction force	800N
Adhesive surface	Bottom (V-shaped)/Rear

Model	NM-B100
size	73 x 50 x 55 (H) mm
Screw Hole Dimensions	M8x1.25P
Maximum suction force	1,000N
Adhesive surface	Bottom (V-shaped)/Rear

Model	NM-B130
size	117 x 50 x 55 (H) mm
Screw Hole Dimensions	M10x1.25P
Maximum suction force	1,300N
Adhesive surface	Bottom (V-shaped)/Rear

Model	NM-B150G
size	120 x 50 x 52 (H) mm
Screw Hole Dimensions	M8x1.25P
Maximum suction force	1,500N
Adhesive surface	Bottom (concave)/rear

The post Nikki Magnet Base first appeared on Kouei Japan Trading | Get Quotation.

Nikki Mini Magnetic Stand

kvt part2 — Fri, 17 Apr 2020 08:18:06 +0000

Manufacturer: Nikki Co., Ltd.

Features of the Mini Magnetic Stand

This is a compact magnet base that can be used in small spaces.
The attraction force is 150N to 300N, and there are various types of arms and clamps.

Model	NM-S
size	ø30ｘ25mm
Maximum suction force	150N
Measuring instrument installation	6mm, 8mm, dovetail groove

Model	NM-MS
size	35 x 30 x 35 (H) mm
Maximum suction force	300N
Measuring instrument installation	6mm, 8mm, dovetail groove

Model	NM-WF
size	35 x 30 x 35 (H) mm
Maximum suction force	300N
Measuring instrument installation	6mm

The post Nikki Mini Magnetic Stand first appeared on Kouei Japan Trading | Get Quotation.

Nikki Magnetic Stand

kvt part2 — Fri, 17 Apr 2020 07:56:00 +0000

Manufacturer: Nikki Co., Ltd.

What is a magnetic stand?

Users mainly use it as a jig to hold measuring instruments with a magnet and secure them to a surface plate when working with a dial gauge or indicator. They can also fix instruments to a magnetic plate during laser or optical experiments.
The magnetic stand firmly holds the device in place, allowing for highly accurate measurements.
Users can manually switch all models on and off, making it easy to attach or detach them from the magnetic surface.

Magnetic Stand Features

Magnet material
It uses ferrite magnets, which are resistant to rust and shock and do not weaken easily.
Manufacturers create ferrite by mixing and sintering iron oxide with elements like cobalt, nickel, or manganese. Because ferrite has high electrical resistance and doesn’t conduct electricity easily, engineers use it for various applications.Adhesive surface
Users can fix the V-shaped or concave magnet to any surface—flat or curved—as long as it attaches stably.

How to use and types of magnetic stands

We have a wide lineup of products with different arm shapes, arm lengths, arm diameters, and arm movement and adjustable ranges.
There are also various types of clamp parts, such as shapes, whether or not they have a dovetail groove, and clamping force, so you can select the product that best suits your application.
Users can use it to hold measuring instruments such as dial gauges and indicators.
In addition to the standard type, the arm part is available in a variety of types, including those with fine adjustment function, tilt lock type, thick support, and flexible type, so you can select the type that best suits your purpose.

Standard Type

Model	NM-K
Maximum suction force	800N
Measuring instrument installation	6mm and 8mm

With fine adjustment function

Model	NM-KV
Maximum suction force	800N
Measuring instrument installation	6mm and 8mm

Thick main pillar type

Model	NM-KT
Maximum suction force	800N
Measuring instrument installation	6mm and 8mm

Tilt lock type

Model	NM-KB
Maximum suction force	800N
Measuring instrument installation	6mm and 8mm

With fine adjustment function (mechanical type)

Model	NM-MX
Maximum suction force	1,000N
Measuring instrument installation	6mm, 8mm, dovetail groove

Flexible Type

Model	NM-FX
Maximum suction force	800N
Measuring instrument installation	6mm and 8mm

The post Nikki Magnetic Stand first appeared on Kouei Japan Trading | Get Quotation.

Nikki Open Type

kvt part2 — Fri, 17 Apr 2020 07:30:27 +0000

Manufacturer: Nikki Co., Ltd.

Providing the world’s highest level of quality

Founded in 1966, TPI is a Taiwanese bearing manufacturer representing East Asia.
Customers in 17 countries—including the United States, Europe, the Middle East, and Southeast Asia—choose the TPI brand, helping it grow as a trusted international name.We are able to provide quality equal to or even better than that of Japanese manufacturers.

What are bearings?

A bearing is a machine element that comes into contact with a rotating or reciprocating part and supports shafts, etc. The term “bearing” comes from the English word “bearing” (bear = to support, to bear).
An ancient Egyptian painting shows the oldest known use of bearings, where people used them to start a fire. Today, engineers and manufacturers install bearings in a wide range of mechanical products. Because bearings are essential to any device with rotating parts, many call them the “rice of the machinery industry.”

The role of bearings

Bearings connect the rotating shaft to its support and allow smooth movement.
Friction always occurs between the rotating “axis” and the part that supports the rotation.
The primary role of bearings is to reduce friction and ensure smooth rotation.

Bearing types

We classify bearings into two main types: plain bearings and rolling bearings.
Plain bearings support a shaft on a sliding surface. As the shaft moves, a thin oil film forms between the shaft and bearing, reducing friction. These bearings resist vibration and perform well under high speeds and impact loads.
In contrast, rolling bearings use balls or rollers placed between an inner and outer ring. There are two types: ball bearings, which use balls, and roller bearings, which use rollers.
Among them, deep groove ball bearings are the most common worldwide. Manufacturers prefer them because they are simple, durable, and easy to produce.
That’s why we focus on providing deep groove ball bearings.

Open type (OP)

Both sides of the bearing are open, so it is sometimes called an open type.
It is a common open type deep groove ball bearing and can be used for a variety of purposes.

Specification

Shield Shape	Open type (OP)
Material	High carbon chromium bearing steel

Standard Model List

Part number	Inner diameter (mm)	Outer diameter (mm)	Width (mm)	Weight (g)
6000	10	26	8	19.0
6001	12	28	8	21.0
6002	15	32	9	30.0
6003	17	35	10	39.0
6004	20	42	12	69.0
6005	twenty five	47	12	80.0
6006	30	55	13	116.0
6007	35	62	14	155.0
6008	40	68	15	190.0
6009	45	75	16	237.0
6200	10	30	9	32.0
6201	12	32	10	37.0
6202	15	35	11	45.0
6203	17	40	12	60.0
6204	20	47	14	106.0
6205	twenty five	52	15	128.0
6206	30	62	16	199.0
6207	35	72	17	288.0
6208	40	80	18	366.0
6209	45	85	19	398.0
6210	50	90	20	454.0
6300	10	35	11	53.0
6301	12	37	12	60.0
6302	15	42	13	82.0
6303	17	47	14	115.0
6304	20	52	15	144.0
6305	twenty five	62	17	232.0
6900	10	twenty two	6	9.0
6901	12	twenty four	6	11.0
6902	15	28	7	16.0
6904	20	37	9	36.0
6905	twenty five	42	9	42.0
6906	30	47	9	48.0
626	6	19	6	8.1
627	7	twenty two	7	13.0
607	7	19	6	8.0
608	8	twenty two	7	12.0

The post Nikki Open Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki Double-Sided Shield Type

kvt part2 — Fri, 17 Apr 2020 07:19:27 +0000

Manufacturer: Nikki Co., Ltd.

Providing the world’s highest level of quality

Founded in 1966, TPI is a Taiwanese bearing manufacturer representing East Asia.
Customers in 17 countries—including the United States, Europe, the Middle East, and Southeast Asia—trust and use the TPI brand, which continues to grow as a global name.
We are able to provide quality equal to or even better than that of Japanese manufacturers.

What are bearings?

A bearing is a machine element that comes into contact with a rotating or reciprocating part and supports shafts, etc. The term “bearing” comes from the English word “bearing” (bear = to support, to bear).
An ancient Egyptian painting shows the earliest known use of bearings—used to start a fire. Today, engineers and manufacturers use bearings in a wide variety of mechanical products. Because bearings are essential in any device with rotating parts, people often call them the “rice of the machinery industry.”

The role of bearings

Bearings support smooth rotation by connecting the shaft to its base.
Friction always occurs between the rotating “axis” and the part that supports the rotation.
The primary role of bearings is to reduce friction and ensure smooth rotation.

Bearing types

Bearings come in two main types: plain bearings and rolling bearings.
Plain bearings support a shaft on a sliding surface, using an oil film to reduce friction. They perform well under vibration, high speed, and impact.
Rolling bearings use balls or rollers between two rings. Ball bearings use balls; roller bearings use rollers. Among them, deep groove ball bearings are the most widely used thanks to their simplicity, reliability, and versatility.
That’s why we specialize in deep groove ball bearings.

Double-sided shield type (ZZ)

This type of bearing has grease sealed inside and is covered on both sides with metal shields. Grease is already sealed inside, reducing maintenance. It has low friction torque and excellent dust resistance. It is ideal for use with machine tools and precision machining equipment.

Specification

Shield Shape	Steel plate shield, non-contact on both sides (ZZ)
Material	High carbon chromium bearing steel

Standard Model List

Part number	Inner diameter (mm)	Outer diameter (mm)	Width (mm)	Weight (g)
6000ZZ	10	26	8	19.0
6001ZZ	12	28	8	21.0
6002ZZ	15	32	9	30.0
6003ZZ	17	35	10	39.0
6004ZZ	20	42	12	69.0
6005ZZ	twenty five	47	12	80.0
6006ZZ	30	55	13	116.0
6007ZZ	35	62	14	155.0
6008ZZ	40	68	15	190.0
6200ZZ	10	30	9	32.0
6201ZZ	12	32	10	37.0
6202ZZ	15	35	11	45.0
6203ZZ	17	40	12	60.0
6204ZZ	20	47	14	106.0
6205ZZ	twenty five	52	15	128.0
6206ZZ	30	62	16	199.0
6207ZZ	35	72	17	288.0
6208ZZ	40	80	18	366.0
6209ZZ	45	85	19	398.0
6210ZZ	50	90	20	454.0
6300ZZ	10	35	11	53.0
6301ZZ	12	37	12	60.0
6302ZZ	15	42	13	82.0
6303ZZ	17	47	14	115.0
6304ZZ	20	52	15	144.0
6305ZZ	twenty five	62	17	232.0
6900ZZ	10	twenty two	6	9.0
6901ZZ	12	twenty four	6	11.0
6902ZZ	15	28	7	16.0
6904ZZ	20	37	9	36.0
6905ZZ	twenty five	42	9	42.0
6906ZZ	30	47	9	48.0
626ZZ	6	19	6	8.1
627ZZ	7	twenty two	7	13.0
607ZZ	7	19	6	8.0
608ZZ	8	twenty two	7	12.0

The post Nikki Double-Sided Shield Type first appeared on Kouei Japan Trading | Get Quotation.

Nikki Synthetic Rubber Double-Sided Shield Type

kvt part2 — Fri, 17 Apr 2020 06:48:25 +0000

Manufacturer: Nikki Co., Ltd.

Providing the world’s highest level of quality

Founded in 1966, TPI is a Taiwanese bearing manufacturer representing East Asia.
Customers in 17 countries—including the United States, Europe, the Middle East, and Southeast Asia—actively choose the TPI brand, which continues to grow as a trusted international name.
We are able to provide quality equal to or even better than that of Japanese manufacturers.

What are bearings?

A bearing is a machine element that comes into contact with a rotating or reciprocating part and supports shafts, etc. The term “bearing” comes from the English word “bearing” (bear = to support, to bear).
An ancient Egyptian painting shows the earliest known use of bearings—used to start a fire. Today, engineers and manufacturers incorporate bearings into a wide range of mechanical products. Because they play a vital role in any device with rotating parts, many refer to bearings as the “rice of the machinery industry.”

The role of bearings

Bearings are used between the rotating “shaft” and the part that supports the rotation.
Friction always occurs between the rotating “axis” and the part that supports the rotation.
The primary role of bearings is to reduce friction and ensure smooth rotation.

Bearing types

Bearings fall into two main categories: plain bearings and rolling bearings.
Plain bearings support a shaft on a sliding surface, forming an oil film between the shaft and bearing. This lubrication allows smooth rotation, while also offering excellent resistance to vibration, high-speed rotation, and impact loads.
In contrast, rolling bearings use balls or rollers placed between an inner and outer ring. There are two main types: ball bearings, which use balls, and roller bearings, which use cylindrical rollers.
Among them, deep groove ball bearings are the most widely used due to their global standardization and broad manufacturer adoption. That’s why we supply deep groove ball bearings as our main product.

Synthetic rubber double-shielded type (LLB)

This type is sealed on both sides with rubber seals, and compared to the metal shielded type, this bearing has better sealing of the internal grease. This type has excellent dust-proofing and low noise properties.
It is ideal for use as an actuator in factory automation equipment and precision instruments.

Specification

Shield Shape	Synthetic rubber double-sided non-contact type (LLB)
Material	High carbon chromium bearing steel

Standard Model List

Part number	Inner diameter (mm)	Outer diameter (mm)	Width (mm)	Weight (g)
6000LLB	10	26	8	19.0
6001LLB	12	28	8	21.0
6002LLB	15	32	9	30.0
6003LLB	17	35	10	39.0
6004LLB	20	42	12	69.0
6005LLB	twenty five	47	12	80.0
6006LLB	30	55	13	116.0
6007LLB	35	62	14	155.0
6008LLB	40	68	15	190.0
6200LLB	10	30	9	32.0
6201LLB	12	32	10	37.0
6202LLB	15	35	11	45.0
6203LLB	17	40	12	60.0
6204LLB	20	47	14	106.0
6205LLB	twenty five	52	15	128.0
6206LLB	30	62	16	199.0
6207LLB	35	72	17	288.0
6208LLB	40	80	18	366.0
6300LLB	10	35	11	53.0
6301LLB	12	37	12	60.0
6302LLB	15	42	13	82.0
6303LLB	17	47	14	115.0
6304LLB	20	52	15	144.0
6305LLB	twenty five	62	17	232.0
6900LLB	10	twenty two	6	9.0
6901LLB	12	twenty four	6	11.0
6902LLB	15	28	7	16.0
6904LLB	20	37	9	36.0
6905LLB	twenty five	42	9	42.0
626LLB	6	19	6	8.1
607LLB	7	19	6	8.0
608LLB	8	twenty two	7	12.0

The post Nikki Synthetic Rubber Double-Sided Shield Type first appeared on Kouei Japan Trading | Get Quotation.