Nitto Kohki | Kouei Japan Trading | Get Quotation

Nitto Kohki JET CHISEL EJC-32A Electric Needle Scaler

kvtpart — Thu, 18 Oct 2018 10:13:27 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: EJC-32A

EJC-32A Powerful 300-watt double insulated motor

• Extended length, slim barrel design
• Adjustable front handle for operator comfort and convenience’

Shot Peening Effect

Reinforcement of a welded part with the shot peening effect increases strength by imparting residual stress to the surface of the workpiece through the high-speed impact of the needles. Highly suitable for effective reinforcement of deteriorated welded parts.

Full Automatic System – Excludes EJC-32A

The only unit of its kind on the market without springs. This means no springs to break… no irregular power… and the advantage of low air consumption.

Self-Adjusting Needles

Jet Chisel needles automatically adjust to any surface contour. They get deep into corners, reach into uneven surfaces, and conform to all types of shapes, making it a tool no shop should be without.

Specification

Model	EJC-32A
Power Source (Single Phase)	110 – 120 V AC, 50/60 Hz	220 – 240 V AC, 50/60 Hz
Rated Power Consumption (W)	300
Rated Current (A)	2.8 (110 – 120V)	1.4 (220 – 240V)
Duty Cycle (min)	30
Strokes per Minute (min⁻¹)	3000
Power Cord Length (m)	5
Mass (Weight) (kg)	4.5

Needle Size	Specification	JC-16	JEX-24	JEX-28	JEX-2800A	AJC-16	JT-16	JT-20	JEX-20	EJC-32A
2 mm	Number of Needles Required	29 pcs.	53 pcs.	66 pcs.	66 pcs.	7 pcs.	15 pcs.	29 pcs.	29 pcs.	32 pcs.
2 mm	Needle Supporter PN	TP00290	TP02244	TP01499	TP01499	TQ05210	TQ15316	TP00338	TP00338	TP16475
3 mm	Number of Needles Required	–	23 pcs.	28 pcs.	28 pcs.	3 pcs.	6 pcs.	12 pcs.	12 pcs.	15 pcs.
3 mm	Needle Supporter PN	–	TP02245	TP01461	TP01461	TQ04554	TQ15315	TP00337	TP00337	TP16301
4 mm	Number of Needles Required	–	–	14 pcs.	14 pcs.	–	–	–	–	–
4 mm	Needle Supporter PN	–	–	TP01462	TP01462	–	–	–	–	–

Needle Diameter	Length	PN	Sales Unit	JC-16	JEX-24	JEX-28	JEX-2800A	AJC-16	JT-16	JT-20	JEX-20	EJC-32A
2 mm	150 mm	TA98780	100 pcs./set	●	●	●	●	●	●	●	●	●
	180 mm	TA98781	100 pcs./set	●	●	●	●	●	●	●	●	●
	300 mm	TA9A213	50 pcs./set	●	●	●	●	●	●	●	●	●
	500 mm	TA9A214	50 pcs./set	●	●	●	●	●	●	●	●	●
3 mm	180 mm	TA98782	100 pcs./set	●	●	●	●	●	●	●	●	●
	300 mm	TA9A216	50 pcs./set	●	●	●	●	●	●	●	●	●
	500 mm	TA9A217	50 pcs./set	●	●	●	●	●	●	●	●	●
	800 mm	TA9A218	50 pcs./set			●	●
4 mm	180 mm	TA98783	50 pcs./set
	300 mm	TA9A220	50 pcs./set			●	●
	500 mm	TA9A221	50 pcs./set			●	●

Optional Needles

Premium Nitto Kohki needles out-perform competitors’ needles ensuring optimal performance and trouble-free operation.

The post Nitto Kohki JET CHISEL EJC-32A Electric Needle Scaler first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki JET CHISEL J Series Needle Scaler

kvtpart — Thu, 18 Oct 2018 10:00:23 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: J Series

Powerful JEX scaling with multi-needles

Quickly and efficiently removes weld slag, rust, paint and scale from most surfaces
Ideal for cleaning and descaling steel, bridgework, castings, brick, stone and many other materials
Heavy-duty construction for industrial and maritime applications
Proven superior design features with no internal spring components ensure trouble-free performance (JEX-2800A and JEX-20 have balancing springs)

Model	JC-16	JEX-24	JEX-28	JEX-2800A
	Lightweight model	Universal model	Heavy-duty model	Reduced vibration model

Model	JC-16	JEX-24	JEX-28	JEX-2800A
Air Pressure (MPa (kgf/cm²))	0.6 (6)	0.6 (6)	0.6 (6)	0.6 (6)
Air Consumption (No-load) (m³/min)	0.15	0.27	0.35	0.43
Strokes per Minute (min⁻¹)	4000	4000	4500	3700
Inlet Size	–	Rc 3/8	Rc 3/8	Rc 3/8
Mass (Weight) (kg)	1.4	2.7	3.5	3.3
Accessories Included	– 29 pieces of 2 mm × 150 mm Needles (Installed) – 29 pieces of 2 mm × 150 mm Needles – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 23 pieces of 3 mm × 180 mm Needles (Installed) – 6 mm Hex. Socket Screw Key – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 28 pieces of 3 mm × 180 mm Needles (Installed) – 14 pieces of 4 mm × 180 mm Needles – Needle Supporter 4 mm – 6 mm Hex. Socket Screw Key – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 28 pieces of 3 mm × 180 mm Needles (Installed) – 14 pieces of 4 mm × 180 mm Needles – Needle Supporter 4 mm – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8

Model	AJC-16	JT-16	JT-20	JEX-20
Description	Slim model	Small and lightweight model	Medium duty model	Reduced vibration model

Model	AJC-16	JT-16	JT-20	JEX-20
Air Pressure (MPa (kgf/cm²))	0.6 (6)	0.6 (6)	0.6 (6)	0.6 (6)
Air Consumption (No-load) (m³/min)	0.07	0.16	0.2	0.2
Strokes per Minute (min⁻¹)	6000	6000	4000	4000
Inlet Size	–	Rc 3/8	Rc 3/8	Rc 3/8
Mass (Weight) (kg)	0.98	0.8	2.4	2.75
Accessories Included	– 3 pieces of 3 mm × 180 mm Needles (Installed) – 3 pieces of 3 mm × 180 mm Needles – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 6 pieces of 3 mm × 180 mm Needles (Installed) – 6 pieces of 3 mm × 180 mm Needles – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 12 pieces of 3 mm × 180 mm Needles (Installed) – 12 pieces of 3 mm × 180 mm Needles – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8	– 12 pieces of 3 mm × 180 mm Needles (Installed) – 12 pieces of 3 mm × 180 mm Needles – Bushing R 3/8 × NPT 3/8 – Hose Nipple R 3/8 × 3/8

The post Nitto Kohki JET CHISEL J Series Needle Scaler first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki SUPER KELEN S Series Pneumatic Scaler

kvtpart — Thu, 18 Oct 2018 09:46:19 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: S Series

Industrial and shipboard pneumatic scalers of S-250, S-500 & S-1000

• Quickly and efficiently removes rust, scale, paint, tar and concrete from most surfaces
• Ideal for industrial, maritime and shipboard cleaning and descaling operations
• Idle protection system, tool will not activate unless contacting work surface
• S-1000 – over 1.3 m in length for extended reach applications and operator convenience
• Tool-less chisel installation and removal

Model	S-250	S-500	S-1000
Air Pressure (MPa (kgf/cm²))	0.6 (6)	0.6 (6)	0.6 (6)
Air Consumption (No-load) (m³/min)	0.27	0.27	0.27
Strokes per Minute (min⁻¹)	2500	2500	2500
Shank Size (mm)	12.7	12.7	12.7
Inlet Size	Rc 1/4	Rc 1/4	Rc 1/4
Mass (Weight) (kg)	4.1	4.7	6.1
Accessories Included	– No.2005 38 mm Bend Scraper (Installed) – Hose Lock Nut M16 – Hose Nipple 3/8

Optional Chisels

Ref. No.	PN	Description	Sales Unit
1	TP03645	No.2001 60 mm Scraper	1 piece
2	TP03646	No.2002 38 mm Scraper	1 piece
3	TP03647	No.2003 Blank Chisel	1 piece
4	TP04010	No.2004 60 mm Concave Scraper	1 piece
5	TP04552	No.2005 38 mm Bend Scraper	1 piece
6	TP04553	No.2006 60 mm Concave Bend Scraper	1 piece
7	TP04554	No.2007 60 mm Bend Scraper	1 piece

The post Nitto Kohki SUPER KELEN S Series Pneumatic Scaler first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki AUTO CHISEL A-300 Air Hammer

kvtpart — Thu, 18 Oct 2018 09:29:28 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: AUTO CHISEL A-300

AUTO CHISEL A-300 A Special Spool Valve Inside The Grip Assures excellent durability

Designed for speeding up the repair and sheet metal work of automobiles, etc.
Enables hammering work in narrow spaces
Durable and powerful action
Fast and easy chisel change to reduce downtime
A wide variety of chisels are available.

Specifications

Specification	Unit	Value
Air Pressure	MPa (kgf/cm²)	0.6 (6)
Air Consumption (No-load)	m³/min	0.3
Strokes per Minute	min⁻¹	2600
Shank Size	mm	10
Inlet Size	–	Rc 1/4
Mass (Weight)	kg	1.7
Accessories Included	–	• Bushing R 1/4 x NPT 1/4 • Hose Nipple R 1/4 x 1/4

Optional Chisels

PN	Name	No.	Description
TP00572	Blank Chisel	1001	For a variety of sheet metal work, bending, and jobs.
TP00573	Flat Chisel	1002	Puts increased efficiency into scraping, peeling spot welds, and cutting off bolts and nuts.
TP04606	Sheet Metal Chisel A	1003	Cuts shapes in sheet metal fast.
TP00575	Sheet Metal Chisel B	1004	Just the chisel for cutting off sheet metal body panels.
TP00576	Silencer Cutting Chisel	1005	A quick cut-off chisel for muffler piping.
TP00577	Rubber Bushing Remover	1006	Helps you remove idle arm sleeves.
TP00578	Spot Weld Booster	1007	Ideal for peeling off spot welded points and cutting off pins.
TP00579	Bushing Tool	1008	Puts speed and ease into the job of bushing insertion.
TP00580	Punch	1009	For driving out pins and rivets, and fitting and removing bearings and races.
TP00581	Bushing Removing Tool	1010	A faster servicing aid in removing bushings.
TP00582	Sheet Metal Punch	1011	Opens holes for bolts and rivets.
TP00583	20 mm Bending Chisel	1012	Helps you in peening and removing slag around welds.
TP00584	Fork Chisel 24	1013	Disconnecting tie rod ends and ball joints.
TP00586	Fork Chisel 35	1016	Disconnecting tie rod ends and ball joints.
TP00585	Fork Chisel 15	1017	Disconnecting tie rod ends and ball joints.
TP00589	38 mm Scraper	1018	Peeling paint & removing rust from iron plates.
TP00590	60 mm Scraper	1019	Peeling paint & removing rust from iron plates.
TP00591	60 mm Concave Scraper	1020	Removing incrustation from pipes.
TP00495	Sheet Metal Chisel C	1023	Cuts shapes in sheet metal fast.
TP05244	Moilpoint Chisel	1024	Breaking up concrete, removing sand from castings.
TP00575	Rivet Removing Punch	1025	Removing rivets from brake lining of heavy-duty cars.
TP05801	Rivet Caulking Chisel	1026	Caulking brake lining of heavy-duty cars.

The post Nitto Kohki AUTO CHISEL A-300 Air Hammer first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki AIR CHIPPER ACH-16 & CH-24 Pneumatic Chipping Hammer

kvtpart — Thu, 18 Oct 2018 09:13:58 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: AIR CHIPPER ACH-16 & CH-24

Removes weld spatter quickly and easily

Ideal tool for quickly and efficiently removing weld spatter, rust and other debris from most surfaces
Compact, heavy-duty construction for tough industrial applications
Easy one-touch chisel installation and removal – NO tools required
Idle protection system helps prevent accidental start-up “ACH-16” only

Specifications

Specification	ACH-16	CH-24
Air Pressure	0.6 MPa (6 kgf/cm²)	0.6 MPa (6 kgf/cm²)
Air Consumption (No-load)	0.15 m³/min	0.2 m³/min
Strokes per Minute	6000 min⁻¹	4000 min⁻¹
Shank Size	10.5 mm (Round)	12.7 mm (Square)
Inlet Size	Rc 3/8	Rc 3/8
Mass (Weight)	0.9 kg	1.7 kg
Accessories Included	• TQ03431 Flat Chisel (Installed) • Bushing R 3/8 x NPT 3/8 • Hose Nipple R 3/8 x 3/8	• TP15166 Curved Flat Chisel (Installed) • Bushing R 3/8 x NPT 3/8 • Hose Nipple R 3/8 x 3/8

Optional Chisels for Air Chipper ACH-16

Ref. No.	PN	Description	Sales Unit
1	TQ03431	Flat Chisel 20 × 120	1 piece
2	TQ03452	Flat Chisel 20 × 180
3	TQ03453	Curved Flat Chisel 20 × 120
4	TQ03549	Flat Chisel 11 × 120

Optional Chisels for Air Chipper CH-24

Ref. No.	PN	Description	Sales Unit
5	TP15233	Flat Chisel 25 × 155	1 piece
6	TP15234	Straight Flat Chisel 12.7 × 165
7	TP15166	Curved Flat Chisel 25 × 155

The post Nitto Kohki AIR CHIPPER ACH-16 & CH-24 Pneumatic Chipping Hammer first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki CIRCUIT BEVELER CBR-03 Pneumatic Radial Chamfering Tool

kvtpart — Thu, 18 Oct 2018 09:00:01 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: CBR-03

For Bridge and Shipbuilding Applications of CBR-03

Bridge

Radius chamfering on the scallop parts or holes of bridge members

Shipbuilding

Meets or exceeds PSPC* requirements on surface preparation of steel materials prior to coating
Radius chamfering on steel materials used in seawater ballast tanks and double-side skin bulk carrier production
Dual cutting head with 4 radius surfaces per tip and a quick-change base *PSPC stands for Performance Standard for Protective Coatings regulated by the International Marine Organization.

Specifications

Specification	Unit	Value
Air Pressure	MPa (kgf/cm²)	0.6 (6)
Air Consumption	m³/min	0.65
Free Speed	min⁻¹ (rpm)	12000
Chamfering Capacity	–	3 mm Radius
Minimum Workpiece Thickness	mm	6
Inlet Size	–	Rc 1/4
Mass (Weight)	kg	2

Accessories Included

2 pieces of Indexable Insert 12.7 R3 (Installed)
2 pieces of Indexable Insert Set Screw (Installed)
Indexable Insert Set Screw
Spanner T-15D
Handle

Chamfer Angle and Width

Other items of Nitto Khkhi
Request the quotation for Nitto Khkhi

The post Nitto Kohki CIRCUIT BEVELER CBR-03 Pneumatic Radial Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki CIRCUIT BEVELER CB-02 Pneumatic Radial Chamfering Tool

kvtpart — Thu, 18 Oct 2018 08:52:36 +0000

Manufacturer: NITTO KOHKI
Model: CB-02

Uniquely designed to chamfer circular, elliptical and straight-line profiles of CB-02

Chamfers exterior and/or interior edges
Depth gauge provided to set chamfer widths accurately
Optional attachment PN TB02437 is available for chamfering thin materials

Specifications

CB-02 Model Specifications

Specification	Unit	Value
Air Pressure	MPa (kgf/cm²)	0.6 (6)
Air Consumption (No-load)	m³/min	0.4
Free Speed	min⁻¹ (rpm)	15000
Chamfering Capacity	–	Up to 2 mm Chamfer or 2 mm Radius
Chamfer Angle	°	45°
Inlet Size	–	Rc 1/4
Mass (Weight)	kg	1.8

Accessories Included

Indexable Insert 9.525 (Installed)
Indexable Insert 9.525
Adjustment Gauge
Spanner T-9F
Protective Cap
Hook Spanner 58-65
Bushing R 1/4 x NPT 1/4

Chamfer Angle, Width and Radius

Mild Steel(mm)

X	Y
2	2

	Mild Steel(mm)
Radius	2

The post Nitto Kohki CIRCUIT BEVELER CB-02 Pneumatic Radial Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki CIRCUIT BEVELER CB-01 Pneumatic Radial Chamfering Tool

kvtpart — Thu, 18 Oct 2018 08:47:13 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: CB-01

Ideally suited for chamfering machine and mould component parts

Only requires a 6.8 mm diameter hole for chamfering
Two 3-sided indexable inserts provide a cost-effective way to get a smooth, chatter-free finish
Aluminum and stainless steel can also be processed with an optional indexable insert

CB-01

Specification	Unit	Value
Air Pressure	MPa (kgf/cm²)	0.6 (6)
Air Consumption (No-load)	m³/min	0.15
Free Speed	min⁻¹ (rpm)	28000
Chamfering Capacity	–	Mild Steel: Up to 1 mm Chamfer Stainless Steel: Up to 0.5 mm Chamfer Aluminum: Up to 1 mm Chamfer
Chamfer Angle	°	45°
Minimum Workpiece Thickness	mm	1.5 (0.5 mm Chamfer)
Inlet Size	–	Rc 1/4
Mass (Weight)	kg	0.5

Note: Optional indexable insert is required.

Accessories Included

2 pieces of Indexable Insert 8.4 (Installed)
2 pieces of Indexable Insert Set Screw (Installed)
2 pieces of Indexable Insert Set Screw
2 mm Hex. Socket Screw Key for Chamfering Adjustments
Spanner T-6F for Replacement of Indexable Insert
Bushing R 1/4 × NPT 1/4

Chamfer Angle and Width

Material	X (mm)	Y (mm)
Mild Steel	1	1
Stainless Steel	0.5	0.5
Aluminum	1	1

The post Nitto Kohki CIRCUIT BEVELER CB-01 Pneumatic Radial Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki MINI BEVELER AMBL-0307 & AMB-0307 Pneumatic Chamfering Tool

kvtpart — Thu, 18 Oct 2018 08:30:18 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: AMBL-0307 & AMB-0307

Ideal for chamfering plates, pipes, tubes and other profiles

Lightweight design for portable edge chamfering applications
Designed to chamfer stainless and carbon steels
Adjustable to chamfer angles from 15° to 45°
300 mm minimum radius bend
Chamfer width up to 7 mm at 45°
Uses indexable carbide inserts

AMBL-0307 & AMB-0307

AMBL-0307 / AMB-0307 Model Specifications

Specification	Unit	Value
Air Pressure	MPa (kgf/cm²)	0.6 (6)
Air Consumption (No-load)	m³/min	0.9
Free Speed	min⁻¹ (rpm)	14000
Chamfering Capacity	–	Mild Steel: Up to 7 mm Chamfer or 2, 3, 4 mm Radius Stainless Steel: Up to 3 mm Chamfer or 2, 3, 4 mm Radius
Chamfer Angle	°	15° – 45°
Inlet Size	–	Rc 3/8
Mass (Weight)	kg	2.9

Accessories Included

Indexable Insert with Hole 12.7 (Installed)
Indexable Insert Set Screw 4 × 7 (Installed)
Indexable Insert with Hole 12.7
Indexable Insert Set Screw 4 × 7
Knob
2 pieces of Hex. Socket Set Screw 8 × 25
2 pieces of Hex. Nut M8
3 mm Hex. Socket Screw Key
4 mm Hex. Socket Screw Key
Spanner T-15F
Bushing R 3/8 × NPT 3/8

Chamfer Angle, Width, and Radius

Chamfer Angle (α)	Mild Steel (mm) (X)	Mild Steel (mm) (Y)	Mild Steel (mm) (Z)	Stainless Steel (mm) (X)	Stainless Steel (mm) (Y)	Stainless Steel (mm) (Z)
45°	7	7	9.9	3	3	4.2
30°	4	7	8.1	2.2	3.8	4.4
15°	2.2	8	8.3	1	3.8	3.9

Radius Values for Mild Steel and Stainless Steel

Material	Radius (mm)
Mild Steel	2, 3, 4
Stainless Steel	2, 3, 4

The post Nitto Kohki MINI BEVELER AMBL-0307 & AMB-0307 Pneumatic Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki CIRCUIT BEVELER ECB-0203 Electric Radial Chamfering Tool

kvtpart — Thu, 18 Oct 2018 08:09:54 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: ECB-0203

Smoothly chamfering straight and curved edges

• Designed to chamfer stainless and mild steel
• Minimum chamfering plate thickness is 2 mm (Max. 0.5 mm Chamfer)
• Indexable inserts have four working edges for good economy
• An optional straight plate allows chamfering a straight edge shoulder.

ECB-0203

ECB-0203 Model Specifications

Specification	Unit	Value
Power Source (Single Phase)	–	220 – 240 V AC, 50/60 Hz
Rated Power Consumption	W	450
Rated Current	A	2.1
Duty Cycle	min	30
No-load Speed	min⁻¹ (rpm)	11000
Chamfering Capacity	–	Mild Steel: Up to 3 mm Chamfer or 2* and 3 mm Radius Stainless Steel: Up to 1.5 mm Chamfer or 2* mm Radius
Chamfer Angle	°	45°
Power Cord Length	m	2.5
Mass (Weight)	kg	2.5

Note:

For 3 mm Radius, an optional indexable insert for 3R is necessary.
For 2 mm Radius, an optional guide sleeve (24 mm diameter) and indexable insert for 2R are necessary.

Accessories Included

Indexable Insert with Hole 12.7 (Installed)
Indexable Insert Set Screw 4 × 7 (Installed)
Indexable Insert with Hole 12.7
Indexable Insert Set Screw 4 × 7
Sub Handle
Grip Guard
Ball Bearing 687zz
5 mm Hex. Socket Screw Key
8 × 10 mm Spanner
Spanner T-150
Gauge C3

The post Nitto Kohki CIRCUIT BEVELER ECB-0203 Electric Radial Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki MINI BEVELER MB-03A Handy Electric Chamfering Tool

kvtpart — Thu, 18 Oct 2018 07:54:53 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: MB-03A

Compact and light for speed chamfering

• An outer R-part attachment allows chamfering of outer diameters with a radius greater than 170 mmS
• An optional inner head ass’y allows chamfering a pipe of inner diameter larger than 100 mm (50R)

Specification

Model	MB-03A
Power Source (Single Phase)	110 V AC, 50/60 Hz / 230 V AC, 50/60 Hz
Rated Power Consumption (W)	430
Rated Current (A)	4.5 (110V) / 2 (230V)
Duty Cycle (min)	30
No-load Speed (min⁻¹/rpm)	11000
Chamfering Capacity (Mild Steel)	Up to 3 mm Chamfer or 2 mm and 3 mm Radius
Chamfer Angle	45°
Power Cord Length (m)	2.5
Mass (Weight) (kg)	2.5

Accessories Included

Indexable Insert 9.525 R2 (Installed)
Indexable Insert 9.525
3 mm Hex. Socket Screw Key
4 mm Hex. Socket Screw Key
Spanner T-9F
Hex. Nut
2 pieces of Hex. Socket Set Screw 8 × 25

The post Nitto Kohki MINI BEVELER MB-03A Handy Electric Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki MINI BEVELER EMB-0307B Handy Electric Chamfering Tool

kvtpart — Thu, 18 Oct 2018 07:42:20 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: EMB-0307B

Designed to chamfer stainless and mild steel

Ideal for edge chamfering pipe, tube, and plate
Adjustable to chamfer angles from 15° to 45°
Chamfer width up to 7 mm on mild steel.
Uses indexable carbide inserts
Swarf and chip collection box included

EMB-0307B Specifications

Specification	Unit	Value
Power Source (Single Phase)	–	220 – 240 V AC, 50/60 Hz*
Rated Power Consumption	W	1100
Rated Current	A	5
Duty Cycle	min	Continuous
No-load Speed	min⁻¹ (rpm)	11000
Chamfering Capacity (Mild Steel)	–	Up to 7 mm Chamfer or 2, 3, 4 mm Radius
Chamfering Capacity (Stainless Steel)	–	Up to 3 mm Chamfer or 2, 3, 4 mm Radius
Chamfer Angle	°	15° – 45°
Power Cord Length	m	2.5
Mass (Weight)	kg	3.9

Note: 115 V available on request.

Accessories Included

Indexable Insert with Hole 12.7 (Installed)
Indexable Insert Set Screw 4 × 7 (Installed)
Indexable Insert with Hole 12.7
Indexable Insert Set Screw 4 × 7
Dust Box Ass’y
Carbon Brush Ass’y
2 pieces of Hex. Nut M8
2 pieces of Hex. Socket Set Screw 8 × 25
3 pieces of Pan Head Screw 5 × 10
4 mm Hex. Socket Screw Key
Spanner T-15D

The post Nitto Kohki MINI BEVELER EMB-0307B Handy Electric Chamfering Tool first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki HAND BEVELER HB-15B Portable Chamfering Tools

kvtpart — Thu, 18 Oct 2018 07:29:01 +0000

Product Made in Japan
Manufacturer: NITTO KOHKI
Model: HB-15B

HB-15B Chamfering up to 15C

Ideal for plate, pipe, and tube chamfering for welding preparation
Chamfer width up to 15 mm at 45° angle using multiple passes
Indexable inserts have four working edges for good economy
Finishes a surface so fine that post-sanding is unnecessary
Column R-section can be chamfered with an optional attachment
High-speed cutting action minimizes material hardening

HB-15B Model Specifications

Specification	Unit	110 – 120 V AC, 50/60 Hz	220 – 240 V AC, 50/60 Hz
Rated Power Consumption	W	910	910
Rated Current	A	10.5	4
Duty Cycle	min	Continuous	Continuous
No-load Speed	min⁻¹ (rpm)	3350	2750
Chamfering Capacity (Mild Steel)	–	Up to 15 mm Chamfer*	Up to 15 mm Chamfer*
Chamfer Angle	°	15° – 45°	15° – 45°
Power Cord Length	m	5	5
Mass (Weight)	kg	15	15

Accessories Included

Cutting Inserts & Tools:
- 12 pieces of Indexable Insert 12.7 (Installed)
- 12 pieces of Indexable Insert 12.7
Wrenches & Keys:
- 3 mm T Wrench
- 4 mm Hex. Socket Screw Key
- 5 mm Hex. Socket Screw Key
- 6 mm Hex. Socket Screw Key
- 24 × 27 mm Spanner
- Hook Spanner 25 – 28
Additional Components:
- Roller Bracket Ass’y
- Spacer A
- Spacer B
- Plate B

The post Nitto Kohki HAND BEVELER HB-15B Portable Chamfering Tools first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki ATRA-100A Portable Magnetic Base Drilling Machine

kvtpart — Wed, 12 Sep 2018 07:42:30 +0000

Made in Japan
Manufacturer: Nitto Kohki
Model : ATRA-100A

ARA-100A Model Specifications

Specification	Unit	Value
Power Source (Single Phase)	–	220 – 240 V AC, 50/60 Hz

Electric Drill

Specification	Unit	Value
Rated Power Consumption	W	1800
Rated Current	A	8.2
No-load Speed	min⁻¹ (rpm)	110-210 / 330 – 660
Morse Taper No.	–	MT3
Rated Duty	min	30

Magnet

Specification	Unit	Value
Magnet Power Consumption	W	80
Magnet Holding Power	N (kgf)	17000 (1733)
Magnet Dimensions	mm	110 × 220

Hole Capacity

Cutter Type	Hole Diameter (mm)	Plate Thickness (mm)
One-touch Type JETBROACH 35L	17.5 to 40	13 to 35
One-touch Type JETBROACH 50L	17.5 to 50	13 to 50
One-touch Type JETBROACH 75L	17.5 to 50	13 to 75
JETBROACH 75L	50 to 100	13 to 75
One-touch Type HI-BROACH 25L	17.5 to 35	13 to 25
One-touch Type HI-BROACH 50L	18 to 35	13 to 50
Twist Drill	Max. 32 mm dia.	–

Cutter Position Adjustment

Specification	Unit	Value
Straight Front to Back	mm	20
Swivel Angle	–	30″

General Specifications

Specification	Unit	Value
Power Cord Length	m	50
Mass (Weight)	kg	30

Accessories Included

Pilot Pin 12075
Side Handle
2.5 mm Hex. Socket Screw Key
5 mm Hex. Socket Screw Key
6 mm Hex. Socket Screw Key
8 mm Hex. Socket Screw Key
Drill Drift
7 x 8 mm Spanner
Safety Chain
Guard
Oil Tank
Oil Tank Bracket
3 pieces of Rod Handle

Optional Accessories

Ref. No.	PN	Description	Sales Unit
1	T801507	Cutting Oil 2L	1 piece
2	T804374	Supporting Magnet Ass’y	1 piece
3	T809727	Holder MT03075 One-touch	1 piece

Load Indication

The load indicator (LED) indicates the condition of the load with different colors of LED light:

Green LED → The load on the drill motor is normal.
Red LED → The load on the drill motor is close to overload.
Blinking Red LED → The drill motor is overloaded.

Automatic Stop Function

As the drilling load increases, the load indicator will change from green to red.

If excessive feeding force is applied, the LED will rapidly blink red, and the drill motor will slow down and stop.
Once the motor has stopped completely, the LED will blink slowly in green.
To resume rotation, release the load, turn off the switch, then turn it back on.

Automatic Restart Function

If the load is released while the load indicator is blinking red, the drill motor will automatically resume rotation.

Built-in Motion Sensor

If lateral movement or excess vibration occurs during drilling, the drill motor will stop instantly, and the LED will blink red.
To resume operation, turn the magnet switch off and on.

Fail-safe Restart

If power is re-supplied after an accidental shutdown, the magnetic field will activate, but the drill will not restart automatically.
The LED will blink green at this stage.
Drilling can only continue after turning on the drill switch.

Magnet Open-circuit Sensor

The drill will not start unless the magnetic field is active.
If a malfunction occurs in the magnet, the LED will blink red slowly, and the drill motor will not rotate.

Features

Reversible Feed Handles

Feed handles can be positioned on the right or left-hand side for ease of drilling.
When changing the feed handle position, the oil tank must be positioned opposite to the feed handles.

Drilling Position Adjustment

The drill position can be adjusted back and forth by 20 mm.
The drill can be pivoted 15 degrees to the left or right, allowing for a total swivel range of 30 degrees.
The clamp lever can be positioned for left-hand or right-hand operation.

The post Nitto Kohki ATRA-100A Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki Annular Cutters

kvtpart — Mon, 27 Aug 2018 09:44:52 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: Jetbroach & Hi-broach

Cutters

Tungsten Carbide Tipped Annular Cutters
For simplicity, one-touch cutter replacement needs no tools

Rationalized Hole-cutting

Genuine one-touch cutters

Nitto Kohki has developed the one-touch replacement system for Jetbroach carbide-tipped annular hole cutters. They are designed to be mounted and removed without the use of a tool. This reduces the time needed to replace cutters.

Jetbroach Cutters are far better than twist drills:

No dead point
Peripheral cutting
Dramatically reduce cutting resistance
Available size: 9/16” – 4” diameter

Features

Carbide tips for faster cutting
Single pass cutting, no pilot hole required
Annular part does all the work so small cutting resistance reduces drilling time
Cutting of slanted, elongated and edge holes is now possible
Fractional and metric cutter sizes to suit wide range of applications
Produces little slag and few chips for easy disposal
Can also be fitted to and used with previous Atra Ace models using a hexagon socket set-screw
Improved concentricity extends cutter life! One-touch system consisting of three balls inside the arbor body produces a self-centering effect during cutting to improve cutter performance and life

Feed & Speeds For Annular Cutters

A guide to the selection of circumferential cutting speeds:

	feet/min	m/min
Stainless Steel	65 – 131	20-40
Mild Steel	98 – 164	30-50
Cast Iron	98 – 164	30-50
Brass	164 – 229	50-70
Aluminum	229 – 295	70-90

Test Drilling is very often the only way to determine the machinability of difficult materials. Use a small size cutter wherever possible in order to minimize trial costs.

Cutter Diameter	Decimal Equivalent	1-3/8″ Depth of Cut Part #	2″ Depth of Cut Part #	3″ Depth of Cut Part #	4″ Depth of Cut Part #
9/16″	.563	TK01160*	TK01162**	–	–
5/8″	.625	TK01161*	TK01163**	–	–
	Exception of TK01160 and TK01161 are 1” DOC uses UEA0625 Pilot Pin *Exception of TK01162 and TK01163 uses UEA0650 Pilot Pin
11/16″	.688	TK00517	TK00559	TK01037	–
17.5mm	.689	TK01249	TK01282	TK01350
18mm	.709	TK01250	TK01283	TK01351
18.5mm	.728	TK01251	–
19mm	.748	TK01252	TK01284	TK01352
3/4″	.750	TK00518	TK00560	TK00981	–
19.5mm	.768	TK01253	TK01285
20mm	.787	TK01254	TK01286	TK01353
20.5mm	.807	TK01255	TK01287
13/16″	.813	TK00519	TK00561	TK00982	TK01054
21mm	.827	TK01256	TK01288	TK01354
21.5mm	.846	TK01257	TK01289
22mm	.866	TK01258	TK01290	TK01355
7/8″	.875	TK00520	TK00562	TK00983	TK01055
22.5mm	.886	TK01259	TK01291
23mm	.906	TK01260	TK01292	TK01356
23.5mm	.925	TK01261	TK01293
15/16″	.938	TK00521	TK00563	TK00984	TK01056
24mm	.945	TK01262	TK01294	TK01357
24.5mm	.965	TK01263	TK01295	TK01358
25mm	.984	TK01264	TK01296	TK01359
1″	1.000	TK00522	TK00564	TK00985	TK00958
26mm	1.024	TK01266	TK01298	TK01360
26.5mm	1.043	TK01267	TK01299	TK01361
1-1/16″	1.063	TK00523	TK00567	TK00986	TK01058
27mm	1.063	TK01268	TK01300	TK01362
28mm	1.102	TK01269	TK01301	TK01363
1-1/8″	1.125	TK00554	TK00568	TK00987	TK01059
29mm	1.142	TK01270	TK01302	TK01364
30mm	1.181	TK01271	TK01303	TK01365
1-3/16″	1.188	TK00555	TK00565	TK00988	TK01060
31mm	1.220	TK01272	TK01304	TK01366
1-1/4″	1.250	TK00524	TK00569	TK00989	TK01773
32mm	1.260	TK01273	TK01305	TK01367
33mm	1.299	TK01274	TK01306	TK01368
1-5/16″	1.313	TK00525	TK00570	TK00990	–
34mm	1.339	TK01275	TK01307	TK01369
1-3/8′	1.375	TK00526	TK00571	TK00991	–
35mm	1.378	TK01276	TK01308	TK01370
36mm	1.417	TK01277	TK01309	TK01371
1-7/16″	1.438	TK00641	TK00572	TK00992	–
37mm	1.457	TK01278	TK01310	TK01372
38mm	1.496	TK01279	TK01311	TK01373
1-1/2′	1.500	TK00642	TK00573	TK00993	–
39mm	1.535	TK01280	TK01312	TK01374
1-9/16″	1.563	TK00643	TK00574	TK00994	–
40mm	1.575	TK01281	TK01313	TK01375
41mm	1.614	–	TK01314	TK01376
1-5/8″	1.625	–	TK00575	TK00995	–
42mm	1.654	–	TK01315	TK01377
1-11/16″	1.688	–	TK00576	TK00996	–
43mm	1.693	–	TK01316	TK01378
44mm	1.732	–	TK01317	TK01379
1-3/4″	1.750	–	TK00577	TK00997	–
45mm	1.772	–	TK01318	TK01380
46mm	1.811	–	TK01319	TK01381
1-13/16″	1.813	–	TK00578	TK00998	–
47mm	1.850	–	TK01320	TK01382
1-7/8″	1.875	–	TK00579	TK00999	–
48mm	1.890	–	TK01321	TK01383
49mm	1.929	–	TK01322	TK01384
1-15/16″	1.938	–	TK00580	TK01000	–
50mm	1.969	–	TK01323	TK01385
2″	2.000	–	TK00581	TK01001	–
51mm	2.008	–	TK01324	TK01386
52mm	2.047	–	TK01325	TK01387
2-1/16″	2.063	–	TK00644	TK01002	–
53mm	2.087	–	TK01326	TK01388
2-1/8″	2.125	–	TK00645	TK01094	–
54mm	2.126	–	TK01327	TK01389
55mm	2.165	–	TK01328	TK01390
2-3/16″	2.188	–	TK00646	TK01095	–
56mm	2.205	–	TK01329
57mm	2.244	–	TK01330
2-1/4″	2.250	–	TK00647	–	–
58mm	2.283	–	TK01331
2-5/16″	2.313	–	TK00648	–	–
59mm	2.323	–	TK01332
60mm	2.362	–	TK01333
2-3/8″	2.375	–	TK00649	–	–
61mm	2.402		TK01334
2-7/16″	2.438	–	TK00650	–	–
62mm	2.441		TK01335
63mm	2.480		TK01336
2-1/2″	2.500	–	TK00651	–	–
64mm	2.520		TK01337
65mm	2.559		TK01338
2-9/16″	2.563	–	TK00652	–	–

Jetbroach cutters with “One-Touch” shanks can be used in drilling machines with 3/4″ side-lock arbors.

Jetbroach Pilot Pins
1-3/8″ Depth of Cut Part #	2″ Depth of Cut Part #	3″ Depth of Cut Part #	4″ Depth of Cut Part #
UEA0835	UEA0850	UEA0875	UEA0800

Industrial Cutters with 1-1/4″ Weldon Shanks*

*Industrial cutters with 1-1/4″ weldon shanks use the special pilot pin #TA9A207-0

Cutter Diameter	Decimal Equivalent	3″ D.O.C. Part #
50mm	1.969	TK01433
51mm	2.008	TK01434
52mm	2.047	TK01435
53mm	2.087	TK01436
54mm	2.126	TK01437
55mm	2.165	TK01438
56mm	2.205	TK01439
57mm	2.244	TK01440
58mm	2.283	TK01441
59mm	2.323	TK01442
60mm	2.362	TK01443
61mm	2.402	TK01444
62mm	2.441	TK01445
63mm	2.480	TK01446
64mm	2.520	TK01447
65mm	2.559	TK01448
66mm	2.598	TK01449
67mm	2.638	TK01450
68mm	2.677	TK01451
69mm	2.717	TK01452
70mm	2.756	TK01453
71mm	2.795	TK01454
72mm	2.835	TK01455
73mm	2.874	TK01456
74mm	2.913	TK01457
75mm	2.953	TK01458

Cutter Diameter	Decimal Equivalent	3″ D.O.C. Part #
76mm	2.992	TK01459
77mm	3.031	TK01460
78mm	3.071	TK01461
79mm	3.110	TK01462
80mm	3.150	TK01463
81mm	3.189	TK01464
82mm	3.228	TK01465
83mm	3.268	TK01466
84mm	3.307	TK01467
85mm	3.346	TK01468
86mm	3.386	TK01469
87mm	3.425	TK01470
88mm	3.465	TK01471
89mm	3.504	TK01472
90mm	3.543	TK01473
91mm	3.583	TK01474
92mm	3.622	TK01475
93mm	3.661	TK01476
94mm	3.701	TK01477
95mm	3.740	TK01478
96mm	3.780	TK01479
97mm	3.819	TK01480
98mm	3.858	TK01481
99mm	3.898	TK01482
100mm	3.937	TK01483

The post Nitto Kohki Annular Cutters first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki QA 4000/6500 Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 09:34:35 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: QA 4000/6500

Model			QA-4000		QA-6500
Power Source (Single Phase)			110-120 VAC, 50/60 HZ	220-240 VAC, 50/60 Hz	220-240 VAC, 50/60 Hz
Electric	Rated Power Consumption W		680		1010
	Rated Current	A	6.1	3.0	4.5
	No-load Speed	min'(rpm)	750		400/750
Magnet Power Consumption		W	50		75
Hole	Cutter		Hole Diameter	Plate Thickness	Hole Diameter	Plate Thickness
	One-touch Type JETBROACH 35L		17.5 to 40	9 to 35	17.5 to 40	9 to 35
	One-touch Type JETBROACH 50L		–	–	17.5 to 65	9 to 50
	One-touch Type HI-BROACH 25L		14 to 15	9 to 12	18 to 35	9 to 25
			16 to 18	9 to 25
Max. Stroke		mm	75		88
Magnet Holding Power		N(kgf)	6664(680)		9800(1000)
Magnet Dimensions		mm	82 x 172		100×200
Power Cord Length		m	4	5	5
Mass (Weight)		kg	18.5		26
Accessories Included			Oil Tank Cutting Oil 0.5L Pilot Pin 08035 Side Handle 3 mm Hex. Socket Screw Key 4 mm Hex. Socket Screw Key 8×10 mm Spanner Chain Tool Box		Oil Tank Cutting Oil 0.5L Pilot Pin 08050 Side Handle 3 mm Hex. Socket Screw Key 4 mm Hex. Socket Screw Key 8×10 mm Spanner Chip Stopper Chain Tool Box

The post Nitto Kohki QA 4000/6500 Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki WOJ-3200/AO-5575A Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 09:26:33 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: WOJ-3200/AO-5575A

Specifications

Model		WOJ-3200		AO-5575A
Power Source (Single Phase)		110 -120 VAC, 50/60 Hz	220 – 240 VAC, 50/60 Hz	220 – 240 VAC, 50/60 Hz
Electric Drill	Rated Power Consumption W	950		950
	Rated Current A	8.6	4.3	4.3
	No-load Speed min'(rpm)	870		520
Magnet Power Consumption W		38	30	50
Hole Capacity mm	Cutter	Hole Diameter	Plate Thickness	Hole Diameter	Plate Thickness
	One-touch Type JETBROACH 25L	12 to 17	9 to 25	12 to 17	9 to 25
	One-touch Type JETBROACH 35L	17.5 to 32	9 to 35	17.5 to 40	9 to 35
	One-touch Type JETBROACH 50L	12 to 32	9 to 50	12 to 55	9 to 50
	One-touch Type JETBROACH 75L	–	–	17.5 to 55	9 to 75
	One-touch Type HI-BROACH 25L	–	–	12 to 50	9 to 25
	One-touch Type HI-BROACH 50L	–	–	12 to 50	9 to 50
	Twist Drill	Max. 13 mm dia.		–

Optional Accessories

Ref. No.	PN	Description	Sales Unit	Applicable Model
Ref. No.	PN	Description	Sales Unit	W0J-3200	A0-5575A
1	TB07691	Chip Breaker Ass’y	1 piece	■
2	TB07474	Chip Breaker Ass’y	1 piece		■
3	TQ10581	Jet Oiler No.3013	1 piece	■
4	TB01098	Tube 4 x 7 x 3000 Ass’y	1 piece	■	■
5	TB01507	Cutting Oil 2L	1 piece	■	■
6	TB07696	Pipe Attachment Ass’y	1 piece	■
7	TB04374	Supporting Magnet Ass’y	1 piece	■	■
8	TB07690	One-touch Drill Adapter	1 piece	■
9	TB02536	Sleeve 6.5 for Triangle Shank Drill Bit	1 piece		■
*50L for stacked plates		One-touch Type JETBROACH 25L	1 piece	■	■
		One-touch Type JETBROACH 35L	1 piece	■	■
		One-touch Type JETBROACH 50L	1 piece	■	■
		One-touch Type JETBROACH 75L	1 piece		■
		One-touch Type HI-BROACH 25L	1 piece		■
		One-touch Type HI-BROACH 50L	1 piece		■

Load Detector with “Smart-Stop/Rapid-Restart” Technology

The world’s first manual feed with “Smart-Stop / Rapid-Restart” technology for WOJ-3200 / AO-5575A

This new feature is a breakthrough in the Manual drill industry. Formerly only found on high-end Nitto Kohki Automatic drills, this technology displays the current drill status via the LED Load Indicator. Customers will experience a cutting-edge drill management system designed solely around saving time and money in replacement parts and cutters in addition to reducing user fatigue and downtime.

As the drilling load increases, the load indicator will change in color from green to orange to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and temporarily stop. If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.

LED load indicator

One-Touch Cutter Replacement
Replacement is quick and easy with our unique push-fit self-centering cutter system.

Reversible Feed Handle

Feed handles can be positioned on the right or left side for ease of drilling and mounting in confined spaces.

Chip Breaker (Optional)

This chip breaker prevents the cutter from becoming jammed with metal shavings.

Body Height Adjustment (WOJ-3200)

The use of Jetbroach cutters requires the frame to be at the lowest position, while twist bit drilling requires the appropriate amount of elevation to be adjusted for safe operation.

One-Touch Drill Adapter (WOJ-3200)

Optional one-touch drill adapter allows the use of up to 13 mm twist drills to be used in the original arbor.

*Twist drills are not provided with the one-touch drill adapter.

Built-in coolant tank to protect against damage (AO-5575A)

The post Nitto Kohki WOJ-3200/AO-5575A Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki WA-3500/5000 Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 09:16:43 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: WA-3500/5000

The post Nitto Kohki WA-3500/5000 Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki LO-3550 Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 09:09:37 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: LO-3550

Compact, light weight, low profile design gives you greater hole making mobility

Drilling on 100 mm or more width web and flange of wide flange beam
Designed to improve drilling on walls, confined and elevated locations
Drill position can be adjusted up to 10 mm travel on each axis straight front to back and pivot side to side

Portable Magnetic Base Drilling Machine ATRA ACE manual feed

Model LO-3550
Max. 35 mm dia. x 50 mm deep

Specifications

Model			LO-3550
Power Source (Single Phase)			220-240 VAC, 50/60 Hz
Electric Drill	Rated Power Consumption W		800
	Rated Current A		3.3
	No-load Speed min ’(rpm)		950
Hole Capacity	Cutter		Hole Diameter	Plate Thickness
	One-touch Type JETBROACH 25L		12 to 17	6 to 25
	One-touch Type JETBROACH 35L		17.5 to 35	6 to 35
One-touch Type JETBROACH 50L		12 to 35	6 to 50
Magnet Holding Power N(kgf)			5500 (561)
Magnet Dimensions mm			65 x 145
Cutter Position		Pivot Side to Side mm	10
Adjustment		Straight Front to Back mm	10
Power Cord Length m			3
Mass (Weight) kg			8.7*

* Without an electric cord and a sub handle

Accessories Included

Carry Case
Cutting Oil 0.5L
Feed Handle
Sub Handle
Pilot Pin 08035
Spanner 17
Blade
Hex. Socket Bolt 5 x 12
Hex. Socket Head Set Screw 8 x 28
4 mm Hex. Socket Screw Key
5 mm Hex. Socket Screw Key
Spanner 7 x 8
Guard
Safety Strap

Chip Breaker

This chip breaker prevents the cutter from becoming jammed with metal shavings.

Optional Accessories

Ref. No.	PN	Description	Sales Unit
1	TB01507	Cutting Oil 2L	1 piece
2	TQ105B1	Jet Oiler
3	TB01098	Tube 4 x 7 x 3000 Assy
4	TB07306	Lubrication Adapter Ass’y
5	TB04374	Supporting Magnet Ass’y
6	TB07696	Pipe Attachment Ass’y
*50L for stacked plates		One-touch Type JETBROACH 25L. 35L, 50L

Easy Drilling Position Adjustment
After engaging the magnet, the drill position can be adjusted up to 10 mm travel on each axis straight front to back and pivot side to side.

Adjustable Feed Handle
The feed handle can be locked at varying angles to enhance productivity.

Light Handle Operation
Fast revolution of Jetbroach cutter makes less cutting resistance and smooth handling.

Easy-to-use Switch Panel
On/off buttons of the magnet and the drill motor are on the front panel and can be operated by one hand. Drilling conditions can be checked by lamp colors.

Reversible Feed Handle
The feed handle can be positioned on the right or left hand side for ease of drilling and mounting in confined spaces.

A Carrying Case Is Provided
The carrying case is a rugged accessory that provides a convenient way to transport and store the LO-3550.

Optional Accessories for ATRA ACE

Pipe Attachment Ass’y

The Pipe Attachment Ass’y is an optional base to securely fasten an Atra Ace on a pipe for drilling. The chain can easily and securely fit around pipes having an outside diameter of 48.6 to 318.5 mm.
Example of installation on a pipe

Applicable Pipe Size: 48.6 to 318.5 mm
PN: TB07696
Applicable Models when a 35 mm or 50 mm length one-touch type Jetbroach cutter is used: CLA-2720, WOJ-3200, LO-3550, WA-3500, and QA-4000

Supporting Magnet Ass’y

If the accessory safety strap or chain is unable to be properly secured to prevent the Atra Ace from falling off the workpiece, the supporting magnet ass’y is recommended. It employs a permanent magnet and can secure the Atra Ace even if power is interrupted.
Installation Example PN:TB04374
Applicable Models: CLA-2720, LO-3550, WA-3500, WOJ-3200, AO-5575A, QA-4000, and QA-6500

The post Nitto Kohki LO-3550 Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki CLA-2720 Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 08:59:54 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: CLA-2720

TOP-LEVEL SAFETY

Highly Sensitive Sensor Equipped
Side Slip and Inclination detected by a built-in sensor
Self-check Function
The machine checks for faults itself

HANDY

Total Weight Just 7 kg
Weight reduced by utilising a moulded plastic Housing
Powered by a Battery
It makes it possible to drill holes anywhere

HIGHLY ADVANCED ENERGY-SAVING

Magnetic Force Control Function
The magnet force is automatically reduced when the drill is not running
Soft Start Function
The large electric current on start-up is prevented by starting the electric drill gently
Automatic Drill Stop and Warning Function
Unnecessary operations are eliminated

Specifications

Voltage:	18 V
Battery Pack:	DC 18 V 4.0 Ah (Li-ion) model NBL18006
Hole Diameter:	12 to 27 mm
Plate Thickness:	6 to 20 mm
No Load Speed:	430 min-1
Magnet Holding Power:	5,500 N
Magnet Dimensions:	65 × 126 mm
Mass (Weight):	7 kg

Standard Accessories

Carry Case Ass’y: 1 set
Cutting Oil 0.5L Ass’y: 1 set
Jet Oiler No.3013: 1 piece
Tube 4×7: 1 meter
Battery Charger: 1 piece
Battery Pack 18V NBL18006: 2 pieces
Guard: 1 piece
Lashing Belt BLCO02R-015: 1 piece
Handle Ass’y: 1 set
Blade: 1 piece
Hex. Socket Head Cap Screw 5×12: 1 piece
Hex. Socket Head Set Screw 8×28: 1 piece
Hex. Socket Screw Key 3: 1 piece
Hex. Socket Screw Key 4: 1 piece
Spanner 8×10: 1 piece

Optional Parts

The post Nitto Kohki CLA-2720 Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

kvtpart — Mon, 27 Aug 2018 08:51:15 +0000

Product Made in Japan
Manufacturer: Nitto Kohki
Model: ARA-100A

The versatile drilling machine with top-class power

Accepts various cutters for diverse drilling
Advanced electronic control for efficient drilling and operator safety

Portable Magnetic Base Drilling Machine ATRA ACE manual feed

Model ARA-100A
Max. 100 mm dia. x 75 mm deep

Specifications

Model			ARA-100A
Power Source (Single Phase)			220-240 VAC. 50/60 Hz
Electric Drill	Rated Power Consumption W		1800
	Rated Current A		8.2
	No-load Speed min ‘(rpm)		110-210/330-660
	Morse Taper No.		MT3
	Rated Duty min		30
Magnet Power Consumption W			80
Hole Capacity mm	Cutter		Hole Diameter	Plate Thickness
	One-touch Type JETBROACH 35L		17.5 to 40	13 to 35
	One-touch Type JETBROACH 50L		17.5 to 50	13 to 50
	One-touch Type JETBROACH 75L		17.5 to 50	13 to 75
	JETBROACH 75L		50 to 100	13 to 75
	One-touch Type HI-BROACH 25L		17.5 to 35	13 to 25
	One-touch Type HI-BROACH 50L		18 to 35	13 to 50
	Twist Drill		Max. 32 mm d a.
Magnet Holding Power N(kgf)			17000(1733)
Magnet Dimens		ons mm	110×220
Cutter Position		Straight Front to Back mm	20
Adjustment		Swivel angle	30′
Power Cord Length m			5
Mass (Weight) kg			30

Accessories Included

Pilot Pin 12075
Side Handle
2.5 mm Hex. Socket Screw Key
5 mm Hex. Socket Screw Key
6 mm Hex. Socket Screw Key
8 mm Hex. Socket Screw Key
7 x 8 mm Spanner
Safety Chain
Guard
Oil Tank
Oil Tank Bracket
3 pieces of Rod Handle

Optional Accessories

Ref. No.	PN	Description	Sales Unit
1	TB01507	Cutting 0.12L	1 piece
2	TBO4374	Supporting Magnet Assy
3	TBO9727	Holder MT03075 One-touch

Slow Starting Function

Slow speed at the beginning of boring will securely set a hole cutting position.

Two speed electric drill with speed adjustment

Optimum drill speed adjustment can be made to bore a hole on difficult-to-cut materials or to securely set a hole cutting position at the initial cutting stage.

Load Indication and LED Condition

Load Indication
The load indicator (LED) indicates the condition of the load with different colors of LED light.
The LED lights up in green. → The load on the drill motor is normal.
The LED lights up in red. → The load on the drill motor is close to overload.
The LED blinks in red. →The drill motor is overloaded.

Automatic Stop Function
As the drilling load increases, the load indicator will change in color from green to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and stop. After the drill motor has come to a complete stop, the load indicator will slowly blink in green. To resume the rotation of the drill motor, release the load and turn off the switch of the drill motor, and then turn it on.

Automatic Restart Function
If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.

Built-in Motion Sensor
If any lateral movement or excess vibration is detected during drilling a hole, the drill motor stops instantly and the LED blinks red. To resume operation, turn the magnet switch off and on.
Fail-safe Restart
The magnetic field will become active, but the drill will not re-start even if power is re-supplied after accidental shutdown. The LED will blink green at this stage. Drilling can only be continued after turning on the drill switch.
Magnet Open-circuit Sensor
The drill will not start until the magnetic field is active. If a malfunction occurs on the magnet, the LED will blink red slowly and the drill motor will not revolve.

Features

Reversible Feed Handles

Feed handles can be positioned on the right or left hand side for ease of drilling.
When changing the feed handle position, the oil tank is required to be positioned opposite to the feed handles.

Drilling Position Adjustment

When the clamp lever is loosened, the drill position can be adjusted back and forth by 20 mm and pivoted 15 degrees to the left or right. The clamp lever can be positioned for left-hand or right-hand operation.

One-Touch Cutter Replacement (Holder MT03075 One-Touch)

	Mounting the cutter Align the depression in the cutter shank with the white line on the sleeve, and then insert the cutter.
	Removing the cutter Turn the sleeve counterclockwise. The cutter will come off.

Available in the market
Twist Drill Bit


MT3 Morse taper shank drill bit can be directly installed.	Use Morse taper sleeve MT3 for other sizes than MT3.	A drill chuck is required to install a straight drill bit.

The post Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki Hi-Broach Cutter

Admin — Sun, 06 Nov 2016 05:16:50 +0000

Product Made in: Japan
Manufacturer: Nitto Kohki
Hi-Broach Cutter

Hibroach cutters with “One-Touch” shanks can be used in drilling machines with 3/4″ arbor bores.

Cutter Size	1″ Depth Part #	Pilot Pins Part #	Pilot Pins Dia.	2″ Depth Part #	Pilot Pins Part #	Pilot Pins Dia.
7/16″	UK00799-0	–	–	UK00803-0	–	–
1/2″	UK00796-0	–	1/4″	UK00804-0	–	1/4″
9/16″	TK00582-0	UEA0625-0	1/4″	TK00805-0	UEA0650-0	1/4″
5/8″	TK00583-0	UEA0625-0	1/4″	TK00806-0	UEA0650-0	1/4″
11/16″	TK00584-0	UEA0825-0	5/16″	TK00808-0	UEA0650-0	1/4″
3/4″	TK00585-0	UEA0825-0	5/16″	TK00809-0	UEA0850-0	5/16″
13/16″	TK00586-0	UEA0825-0	5/16″	TK00810-0	UEA0850-0	5/16″
7/8″	TK00587-0	UEA0825-0	5/16″	TK00811-0	UEA0850-0	5/16″
15/16″	TK00588-0	UEA0825-0	5/16″	TK00812-0	UEA0850-0	5/16″
1″	TK00589-0	UEA0825-0	5/16″	TK00813-0	UEA0850-0	5/16″
1-1/16″	TK00590-0	UEA0825-0	5/16″	TK00814-0	UEA0850-0	5/16″
1-1/8″	TK00591-0	UEA0825-0	5/16″	TK00815-0	UEA0850-0	5/16″
1-3/16″	TK00592-0	UEA0825-0	5/16″	TK00816-0	UEA0850-0	5/16″
1-1/4″	TK00593-0	UEA0825-0	5/16″	TK00817-0	UEA0850-0	5/16″
1-5/16″	TK00594-0	UEA0825-0	5/16″	TK00818-0	UEA0850-0	5/16″
1-3/8″	TK00595-0	UEA0825-0	5/16″	TK00819-0	UEA0850-0	5/16″

Hibroach Pilot Pins
1″ Depth of Cut		2″ Depth of Cut
Part #	Diameter	Part #	Diameter
UEA0625-0	1/4″	UEA0650-0	1/4″
UEA0825-0	5/16″	UEA0850-0	5/16″

The post Nitto Kohki Hi-Broach Cutter first appeared on Kouei Japan Trading | Get Quotation.

Nitto Kohki Atra Ace LO-3000A Drilling Machine

Admin — Sun, 25 Sep 2016 13:55:36 +0000

Product made in Japan
Manufacturer: Nitto Koki
Model: LO-3000A

General Information

Model Name: LO-3000A
Product Code: 44330
Product Number: TB08906
JAN Code: 4992338443306
Category: Drilling Equipment (Cutting)
Group Name: Machine Tools
Subgroup Name: Drilling/Tapping (Cutting)
Status: Discontinued

Power Supply

Power Source: AC 100V, 50/60Hz
Rated Power Consumption: 750W
Rated Current: 7.9A
Magnet Power Consumption: 35W

Drilling Capacity

Hole Diameter & Maximum Plate Thickness:
- φ11.5 to φ13mm (Max Plate Thickness: 20mm)
- φ14 to φ17mm (Max Plate Thickness: 25mm)
- φ17.5 to φ30mm (Max Plate Thickness: 35mm)
Jet Broach, One-Touch Type:
- 35L: Hole Diameter φ17.5～φ30mm (Plate Thickness 6mm～35mm)
- 25L: Hole Diameter φ14～φ30mm (Plate Thickness 6mm～25mm)
- 20L: Hole Diameter φ11.5～φ13mm (Plate Thickness 6mm～20mm)
Drilling Capacity (Plate Thickness: Annular Cutter): 6～35mm
Drilling Capacity (Hole Diameter): 11.5～30mm

Performance & Features

No-Load Speed: 1,100 rotations per minute (rpm)
Maximum Stroke Length: 58mm
Minimum Plate Thickness for Magnet Adhesion: 6mm
Maximum Magnet Attraction Force: 5,500N (561kgf)
Magnet Dimensions: 65mm × 145mm
Cable Length: 5m
Position Adjustment Range:
- Horizontal Movement (Left/Right): 10mm
- Vertical Movement (Front/Back): 10mm

Key Functionalities

One-touch blade replacement method for quick and easy bit changes
Compact, lightweight, and low-profile design for use in tight spaces, walls, and elevated work areas
Reversible feed handle can be switched between left-hand and right-hand operation

Standard Accessories

Carrying Case: 1 box
Feed Handle: 1 piece
Pilot Pin A2 (08035): 1 piece
Oiler: 1 piece
Tube 4×7×1000: 1 piece
Hexagonal Bar Wrench 4mm: 1 piece
Hexagonal Socket Set Screw Rod End 8×28: 1 piece
Cutting Oil 0.5L: 1 can
Belt Lashing: 1 piece

Ordering Information

When placing an order, please specify the product number or product code.

The post Nitto Kohki Atra Ace LO-3000A Drilling Machine first appeared on Kouei Japan Trading | Get Quotation.