Features of HPC-156WDF

Innovative lightweight and cordless model for punching φ15 / t6 stainless steel.

• “Double acting” hydraulic return for jam-free operation.
• The new punch design makes it easier to confirm the hole position.
• A hole puncher is specifically designed to provide high-quality holes quickly and efficiently.
• Max. hole size: φ15 ⁄ t6mm（Stainless steel).

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum or steel, please consult with us

Punching Throat [Unit: mm]

Features

• Installed “Proximity Switch (Malfunction Prevention Sensor)” for safe and reliable bending (angle bending) processing.
• By setting various units on the MPT-650S main unit, cutting, V-notch and bending can be performed in three types.
• General steel can be processed up to 50 × 50 × t6, and stainless steel (SUS304) can be processed up to 50 × 50 × t4.
• Units can be easily and quickly replaced by simply inserting and removing pins.
• Three types of units can be purchased by freely selecting the combination with the main unit.
• The main unit and various units are lightweight and compact design, so it is easy to bring them to the work site.
• With a powerful motor, speedy processing is possible.
• Use a foot switch to further improve workability and operability (sold separately).
  * Select various MPT-650S units according to the processing application and purchase them together with the main unit. It cannot be processed with the main unit or unit alone.

Specifications

MPT-650S Specifications

MPT-650BS Specifications

Bending process example

MPT-650CS Specifications

A: Cut off part 7.5mm

MPT-650NS Specifications

A: 90 ° V notch B: 45 ° corner cut C: 90 ° corner

MPT-650NS (notch unit) replacement blade 

① N-type cutter C (can be used on both sides) ② N-type cutter A ③ N-type cutter B (can be used on both sides)

*: Standard accessories

(N-type blades B and C are fixed blades that can be used in common with various blades A.)

■ Tip shape of blade A

(1) Standard accessory cutter

(2) Thin blade cutter (option)

(3) Corner cutting cutter (option)

Other items of Ogura

Request the quotation for Ogura

Features

The new “N” series punchers are double acting and have a new designed punch holder for longer life.

The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron and channel steel.

The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification

Materials Dimensions [Unit: mm]

H-section steel

Minimum 100 x 100
Maximum 300 x 150

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
10	SB10	t2 ~ t6	t8	t3 ~ t4
11	SB11	t2 ~ t9	t8	t3 ~ t6
12	SB12	t2 ~ t9	t8	t3 ~ t6
13	SB13	t2 ~ t9	t8	t3 ~ t6
14	SB14	t2 ~ t9	t8	t3 ~ t6
15	SB15	t2 ~ t9	t8	t3 ~ t6
16	SB16	t2 ~ t9	t8	t3 ~ t6
18	SB18	t2 ~ t9	t8	t3 ~ t6
19	SB19	t2 ~ t9	t8	t3 ~ t6
20	SB20	t2 ~ t9	t8	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t8	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t8	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t9	t8	t3 ~ t6
12×18	12 × 18B	t2 ~ t9	t8	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t9	t8	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t9	t8	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t9	t8	t3 ~ t6

Punching Throat [Unit:mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

Machine body dimensions

A: 137 mm   B: 52.5 mm   C: 205 mm   D: 155 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N209WDF

“N” series puncher cordless model

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t9mm（MILD STEEL)

Punching Throat [Unit:mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N208WDF

“N” series puncher cordless model

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t8mm（MILD STEEL)

Punching Throat [Unit:mm]

A: 8.5 mm   B: 40 mm   C: 15 mm   D: 62.5 mm   E: 90 mm   F: 38.5 mm

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-NF188WBL

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

HPC-NF188WBL

• With a new brushless motor, high-power drilling.
• N series puncher that can drill holes in narrow parts flexibly because the head part is tiltable up to 90 ° ^* and the motor part rotates 360 °. * The angle that can be fixed with the positioning knob is in two stages: 0 ° and 90 °.

Specification of HPC-NF188WBL

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum or steel, please consult with us

Punching Throat [Unit: mm]

A: 8.5 mm   B: 38 mm   C: 15 mm   D: 61 mm   E: 88 mm   F: 39 mm

Dimensions for drilling holes from the wall [Unit: mm]

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-2213W

N series demo video

Features of HPC-N209W

The new “N” series punchers are double-acting and have a newly designed punch holder for longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic return for jam-free operation.
• The new punch design makes it easier to confirm the hole position.
• The hole puncher is specifically designed to provide high-quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t9mm（MILD STEEL)

Specification of HPC-N209W

Motor	Single-Phase, 110-120V/220-240V, 50/60Hz, 1050W Double Isulation
Max. Hole size	Mild steel (65,000 psi): φ20/t9 Stainless steel (89,000 psi): φ20/t6
Hole Shape	Round/Oblong
Max. Throat Depth	40mm
Weight	11.3kg
Dimensions	529mm (L)×127mm (W)×315mm (H)
Standard Accessories	Punch: φ14mm Die SB14mm Hydraulic oil #46 Work stand Carrying case Grip Strap Hex wrenches (3•4•5•8mm) Tommy bar Spanner (8 × 10mm)
Option	Slide stopper (Max. throat depth)

Materials Dimensions of HPC-N209W [Unit: mm]

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t8	t3 ~ t4
11	SB11	t2 ~ t9	t8	t3 ~ t6
12	SB12	t2 ~ t9	t8	t3 ~ t6
13	SB13	t2 ~ t9	t8	t3 ~ t6
14	SB14	t2 ~ t9	t8	t3 ~ t6
15	SB15	t2 ~ t9	t8	t3 ~ t6
16	SB16	t2 ~ t9	t8	t3 ~ t6
18	SB18	t2 ~ t9	t8	t3 ~ t6
19	SB19	t2 ~ t9	t8	t3 ~ t6
20	SB20	t2 ~ t9	t8	t3 ~ t6

Oblong Punch & Die [Unit: mm]

■ Thickness for long hole punches and dies [Unit: mm]

Oblong punch	Long die	General steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t8	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t8	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t9	t8	t3 ~ t6
12×18	12 × 18B	t2 ~ t9	t8	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t9	t8	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t9	t8	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t9	t8	t3 ~ t6

Punching Throat [Unit: mm]

A: 10 mm   B: 40 mm   C: 15 mm   D: 72.5 mm   E: 100 mm   F: 44 mm

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N208W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, an,gle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic rejam-free jam free opThe newtion.
• New punch design makes it easier to confirm the hole pA holeion.
• Hole puncher is specifically designed tohigh-qualityh quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ20 ⁄ t8mm（MILD STEEL)

Specification of HPC-N208W

Motor	Single-Phase, 110-120V/220-240V, 50/60Hz, 710InsulationIsulation
Max. Hole size	Mild steel (65,000 psi): φ20/t8 Stainless steel (89000 psi) :φ20/t6
Hole Shape	Round/Oblong
Max. Throat Depth	40mm
Weight	10.3kg
Dimensions	487mm (L)×127mm (W)×315mm (H)
Standard Accessories	Punch: φ12mm Die SB12mm Hydraulic oil #46 Work stand Carrying case Grip Strap Hex wrenches (3•4•5•8mm) Tommy bar Spanner (8 × 10mm)
Option	Slide stopper (Max. throat depth)

Materials Dimensions of HPC-N208W [Unit: mm]

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel Flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t7.5	t3 ~ t4
11	SB11	t2 ~ t8	t7.5	t3 ~ t6
12	SB12	t2 ~ t8	t7.5	t3 ~ t6
13	SB13	t2 ~ t8	t7.5	t3 ~ t6
14	SB14	t2 ~ t8	t7.5	t3 ~ t6
15	SB15	t2 ~ t8	t7.5	t3 ~ t6
16	SB16	t2 ~ t8	t7.5	t3 ~ t6
18	SB18	t2 ~ t8	t7.5	t3 ~ t6
19	SB19	t2 ~ t8	t7.5	t3 ~ t6
20	SB20	t2 ~ t8	t7.5	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t7.5	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t7.5	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t8	t7.5	t3 ~ t6
12×18	12 × 18B	t2 ~ t8	t7.5	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t8	t7.5	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t8	t7.5	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t8	t7.5	t3 ~ t6

■ Punching Throat [Unit: mm]

A: 8.5 mm   B: 40 mm   C: 15 mm   D: 62.5 mm   E: 90 mm   F: 38.5 mm

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-NF188W

The new “N” series punchers are double-acting and have a newly designed punch holder for longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

“N” series puncher for C-shaped steel (Lip Channel)

• “Double acting” hydraulic return for jam free operation.
• New punch design makes it easier to confirm the hole position.
• Hole puncher is specifically designed to provide high quality holes quickly and efficiently.
• MAX. HOLE SIZE: φ18 ⁄ t8mm（MILD STEEL)

Specification of HPC-NF188W

Motor	Single phase 100V 710W 50 / 60Hz times Double insulation
Mass	10.7kg
Body dimensions	522 (L) x 149 (W) x 180 (H) mm
Depth	38mm
Hole shape	Round / long hole
Maximum drilling capacity	General steel (SS400 equivalent): Φ18 / t8
	Stainless steel (SUS304): Φ18 / t6
Standard accessories	Punch Φ12mm Die SB12 Nut tightening bar Hexagon wrench (3, 4, 5, 6) Spanner (8 × 10) Strap Hydraulic oil Product case Work stand
Option	Foot switch

Materials Dimensions of HPC-NF188W [Unit: mm]

Flat bar

Max: 75xt8 (Center Punching)

Angle Steel

Minimum 40 x 40 x t3
Maximum 75 x 75 x t6

Channel Flange 

Minimum 75 × 40
Maximum 100 × 50

Round Punch & Die [Unit: mm]

Round punch	Round die	Mild steel	Channel flange	Stainless steel
6	SB6	t2 ~ t4	–	t3 ~ t4
6.5	SB6.5	t2 ~ t6	–	t3 ~ t4
8	SB8	t2 ~ t6	–	t3 ~ t4
8.5	SB8.5	t2 ~ t6	–	t3 ~ t4
Ten	SB10	t2 ~ t6	t7.5	t3 ~ t4
11	SB11	t2 ~ t8	t7.5	t3 ~ t6
12	SB12	t2 ~ t8	t7.5	t3 ~ t6
13	SB13	t2 ~ t8	t7.5	t3 ~ t6
14	SB14	t2 ~ t8	t7.5	t3 ~ t6
15	SB15	t2 ~ t8	t7.5	t3 ~ t6
16	SB16	t2 ~ t8	t7.5	t3 ~ t6
18	SB18	t2 ~ t8	t7.5	t3 ~ t6

Oblong Punch & Die [Unit: mm]

Oblong punch	Long die	Mild steel	Channel Flange	Stainless steel
6.5 × 10	6.5 × 10B	t2 ~ t6	–	t3 ~ t4
6.5 × 13	6.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 13	8.5 × 13B	t2 ~ t6	–	t3 ~ t4
8.5 × 17	8.5 × 17B	t2 ~ t6	–	t3 ~ t4
9 x 13.5	9 × 13.5B	t2 ~ t6	–	t3 ~ t4
9 x 18	9 × 18B	t2 ~ t6	–	t3 ~ t4
10×15	10 × 15B	t2 ~ t8	t7.5	t3 ~ t6
10×20	10 × 20B	t2 ~ t8	t7.5	t3 ~ t6
11 x 16.5	11 x 16.5B	t2 ~ t8	t7.5	t3 ~ t6
12×18	12 × 18B	t2 ~ t8	t7.5	t3 ~ t6
13 x 19.5	13 × 19.5B	t2 ~ t8	t7.5	t3 ~ t6
14 × 21	14 × 21B	t2 ~ t8	t7.5	t3 ~ t6
15 × 21	15 × 21B	t2 ~ t8	t7.5	t3 ~ t6

Punching Throat [Unit: mm]

A: 8.5 mm   B: 38 mm   C: 15 mm   D: 61 mm   E: 88 mm   F: 39 mm

Dimensions for drilling holes from the wall [Unit: mm]

---

Other items of Ogura

Request the quotation for Ogura

N series demo video

Features of HPC-N186W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, an,gle steel and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification of HPC-N186W

Materials Dimensions of HPC-N186W [Unit: mm]

Round Punch & Die [Unit: mm]

Oblong Punch & Die [Unit: mm]

■ Punching Throat [Unit: mm]

N series demo video

Features of HPC-N6150W

The new “N” series punchers are double-acting and have a newly designed punch holder for a longer life. The punch is also redesigned so that only one “N” series punch is required to punch the range of materials: mild steel, stainless steel, angle iron, and channel steel. The center of the punch has been made wider for easier positioning.

• Both punching and retracting are completed by hydraulic power. This solves the “punch jammed” problem and allows faster work at the site.
• As a result of reviewing the basic structure of the tool from the user’s point of view, we changed the design of the die, punch & punch holder to make them more durable and to make the setting of the punch & die easier.
• Only one die for flat bar, angle steel, and channel flange. It is not necessary to change the die when punching different materials or thicknesses.
  ∗Thinner material (t2-3.2mm) may have some burrs or deformation.

Specification of HPC-N6150W

Materials Dimensions of HPC-N6150W [Unit: mm]

Round Punch & Die [Unit: mm]

Oblong Punch & Die [Unit: mm]

* If you want to reduce hole accuracy or burrs when drilling thin plates (t2 to t3.2), aluminum,m or steel, please consult with us.

Punching Throat (Punch + Long die) and (Long punch + Die) [Unit: mm]

A: 8.5   B: 50   C: 15   D: 96.5   E: 66   F: 90.5

A: 8.5   B: 50   C: 15   D: 61.5   E: 66   F: 55.5

---

Other items of Ogura

Request the quotation for Ogura

Features of HPC-156W

The HPC-156W is double-acting and has a newly designed punch holder for longer life. The punch is redesigned so that only one punch is required to punch the range of materials: mild steel, stainless steel, aluminum, and copper. The center of the punch has been made wider for easier positioning.

Specification

Materials Dimensions [Unit: mm]

Round Punch & Die [Unit: mm]

■ Oblong Punch & Die [Unit: mm]

Punching Throat [Unit: mm]

Specification of Hydraulic Oil

Dimension drawing of Replacement Blade

Specification

Other items of Ogura

Request the quotation for Ogura

Features of HBB-90DFN

• Battery (3.0Ah) after full charge can be used to bend the D16 reinforcing bar 90 ° continuously 50 times.
• Because it is cordless, it is easy to carry on-site.
• Work efficiency is also greatly improved.
  * This product is designed to reduce the impact on water and dust.
  * Based on our test values. The number of bendings and the bending speed vary depending on the working conditions.

Specification

Minimum necessary length of bending

Features of MSB-25

• Rebar vendor with a powerful motor mounted on a small body that demonstrates outstanding power.
• This model pursues trouble-free durability and high performance in every detail.
• Easy to use dial type for setting the bending angle. In addition, a convenient angle fine adjustment lever allows angle adjustment from 0 ° to 180 °.
• Adopts a “partition wall structure” that does not allow iron powder that can cause failure to enter.
• Use a foot switch to further improve workability (sold separately).
• Bending of small R is also possible by right angle bending collar (sold separately).

Specification of MSB-25

Minimum necessary length of bending

Combination of Roller and Collar

Rebar diameter	roller	Color	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D10	B13 (Φ160)	None (Axis Φ40)	83mm	103mm	123mm
	* B10 (Φ168)		65mm	85mm	105mm
D13	B13 (Φ160)	None (Axis Φ40)	76mm	97mm	118mm
D16	B19 (Φ127)	16 (Axis Φ52)	116mm	143mm	170mm
	* B16 (Φ142)		91mm	118mm	145mm
D19	B19 (Φ127)	19 (Φ61)	104mm	136mm	168mm
D22	B22 (Φ110)	22 (Φ70)	121mm	157mm	193mm
D25	B25 (Φ92)	25 (Φ80)	138mm	180mm	222mm

(Note) *: Optional.

Rebar diameter	Color	B dimension (minimum)
D10	None (Axis Φ40)	144mm
D13	None (Axis Φ40)	150mm
D16	16 (Φ52)	168mm

---

Other items of Ogura

Request the quotation for Ogura

Features of MB-225

• High-end reinforcing bar bender for D25 (SD490 material).
• Easy dial dialing is used to set the basic bending angle. In addition, the angle can be adjusted more finely when used in combination with the fine adjustment lever.
• Adopts a “partition wall structure” that does not allow iron powder that can cause failure to enter.
• A roller collar of each size is standard equipment.
• Using a foot switch further improves workability and operability (sold separately).
• The “Small Angle Bending Collar” supports D10, D13, and D16 “Small” bending radius processing (sold separately).
• The optional roller collar also supports 6D bending (sold separately).

Specification of MB-225

Minimum necessary length of bending

Combination of Roller and Collar

Rebar diameter	Roller	Collar	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D10	* 413 (Φ193)	None (Axis Φ40)	111mm	130mm	150mm
	* 410 (Φ211)		81mm	100mm	120mm
D13	416 (Φ175)	413 (Φ52)	123mm	149mm	174mm
	* 413 (Φ193)		93mm	119mm	144mm
D16	416 (Φ175)	416 (Φ64)	106mm	137mm	169mm
D19	422 (Φ136)	419 (Φ76)	152mm	190mm	227mm
	* 419 (Φ155)		123mm	161mm	198mm
D22	422 (Φ136)	422 (Φ88)	138mm	181mm	224mm
D25	425 (Φ115)	425 (Φ100)	156mm	205mm	254mm

(Note) *: Optional. 
(Note) When bending D10the, use No.413 or No.410 roller. 

Rebar diameter	Collar	A dimension (minimum)
D10	None (Axis Φ40)	162mm
D13	413 (Φ52)	177mm
D16	416 (Φ64)	192mm

■ Combination of Roller and Collar for 5D (optional)

Rebar diameter	Roller	Collar	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D16	* 419 (Φ155)	* 516 (Φ80)	120mm	151mm	183mm
D19	422 (Φ136)	519 (Φ95)	140mm	178mm	215mm
D22	425 (Φ115)	522 (Φ110)	158mm	201mm	244mm
D25	B25 (Φ92)	525 (Φ125)	179mm	228mm	277mm

(Note) *: optional. 

■ Combination of Roller and Collar for 6D (optional)

Rebar diameter	Roller	Collar	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D19	* 619 (Φ119)	* B619 (Φ114)	148mm	200mm	252mm
D22	B25 (Φ92)	* B622 (Φ132)	172mm	232mm	292mm
D25	* 625 (Φ65)	* B625 (Φ150)	194mm	263mm	332mm

---

Other items of Ogura

Request the quotation for Ogura

Features of MB-819

• Easy to use dial type for setting the bending angle. The angle can be set from 0 ° to 180 ° with a convenient angle fine adjustment lever.
• Isolates the processed and structural parts and shuts out the iron powder.
• Various bending processes are possible by combining rollers and collars.
• Use a foot switch to further improve workability (sold separately).
• Bending of small R is also possible by right angle bending collar (sold separately).

Specification of MB-819

Minimum necessary length of bending

Combination of Roller and Collar

Rebar diameter	roller	Collar	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D10	B10 (Φ138)	B10 (Φ39)	66mm	86mm	106mm
D13	B13 (Φ118)	B13 (Φ52)	84mm	110mm	136mm
D16	B16 (Φ100)	B16 (Φ64)	99mm	131mm	163mm
D19	B19 (Φ80)	B19 (Φ76)	118mm	156mm	194mm

Rebar diameter	Collar	B dimension (minimum)
D10	B10 (Φ39)	132mm
D13	B13 (Φ52)	151mm
D16	B16 (Φ64)	169mm

---

Other items of Ogura

Request the quotation for Ogura

Features of MB-L16

• Achieves a table surface height of 183mm. Easier to place reinforcing bars on the table, further improving workability.
• Equipped with a new shock absorber, the durability has been greatly improved by significantly improving the recoil and impact sound when the roller returns.
• Easy dial dialing is used to set the basic bending angle.
• In addition, the angle can be adjusted more finely when used in combination with the fine adjustment lever.
• Adopts a “partition wall structure” that does not allow iron powder that can cause failure to enter.
• Each size roller/collar is standard equipment.
• D10 and D13 “small” bend radius processing is also supported by the right angle bend collar (sold separately).

Specification of MB-L16

Minimum necessary length of bending 

Combination of Roller and Collar

Rebar diameter	Roller	Collar	A dimension (minimum)
			90 ° bend	135 ° bending	180 ° bending
D10	B10 (Φ88)	B10 (Φ38)	65mm	84mm	103mm
D13	B13 (Φ70)	B13 (Φ50)	80mm	105mm	130mm
D16	B16 (Φ52)	B16 (Φ62)	95mm	126mm	157mm

Features of HBB-180

• The internal “spool valve mechanism” allows arbitrary step-less bending.
• The bending angle can be easily seen by the scale.
• With a user-oriented standard 5m power cord.

Specification of HBB-180

Other features

■ On-site rebar processing

■ 180 ° bending

 Minimum necessary length of bending

Features of HBB-525

• A “repair” vendor that integrates the hydraulic pump part and the work part.
• Correction work by “push/pull bending” on site is possible.
• The tip can be swung freely, and work in the field can be handled flexibly.

Specification

Other items of Ogura

Request the quotation for Ogura

Features of HBB-32HPW

• Fully compatible with high-strength reinforcing bars required by the new era construction method = SD490.
• A “repair” vendor that integrates the hydraulic pump and the workpiece.
• Correction work by “push/pull bending” on-site is possible.
• Because the tip turns freely, it is possible to respond flexibly on-site.

Specification

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HSC-38BL

• The lightest D38 (1.5″) cordless rebar cutter in the industry.
• When used with optional right-angle cutting table, the cut rebar is suitable for making a coupler mechanical joint.
• Equipped with an easy-to-read battery indicator.
• Motor design protects against dust and moisture.
• The handle can be installed either on the left, right, or upper side.

SPECIFICATIONS OF HSC-38BL

Other Information

HSC-20BLN Other features:

The First in the Industry Equipped with Automatic Speed Control!

Automatic switching mode: 

Automatically changes the cutting speed according to load conditions for optimum operation.

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HSC-25BLN

Equipped with an easy-to-read battery indicator.
Motor design protects against dust and moisture.
Close cutting is possible with just 3.5 mm of rod left above the surface after the cut is completed.
Stable operation with minimum vibration achieved through new-style blade installation.
Minimum burring when cutting-removes need to dress threaded rod before attaching nut.
The handle can be installed either on the left, right, or upper side.

SPECIFICATIONS

HSC-25BLN Other features:

The First in the Industry equipped with Automatic Speed Control!
Automatic switching mode:
Automatically changes the cutting speed according to load condition for optimum operation.

FEATURE OF HSC-20BLN

• The new original tip saw ^* with excellent cost performance ^*adopts a strong irregular triple pin method, realizing stable cutting performance without flanges and user-friendly mounting (with incorrect mounting prevention function).
• Continued adoption of the “single bolt” method, which has been highly acclaimed and is easy to mount Ogura’s original blade.
• Equipped with a new brushless motor that is cordless but achieves the same high power as an AC100V machine.
• “Moisture-proof / dust-proof” for the motor part ^* Body and removable dust cover that can be easily cleaned are used.
• Equipped with a highly visible battery level indicator lamp and automatic shift indicator lamp on the motor.
• Users can open the insertion bar and cut the frame rebar at 3.5mm from the claw and the edge.
• Workers mount the bolt mounting position of the bottom plate cover from above, eliminating troubles during bolt removal due to wear.
• They also treat the surface of the bottom plate cover to prevent abrasion during cutting, ensuring consistent and stable work.
• Once they cut all the screws, they can insert nuts without needing deburring.

* This product design minimizes the impact on water and dust.

SPECIFICATIONS OF HSC-20BLN

Other Information

HSC-20BLN Other features:

The First in the Industry equipped with Automatic Speed Control!

Automatic switching mode: 

Automatically changes the cutting speed according to load condition for optimum operation.

FEATURE OF HCC-19BL

• The D19 cordless rebar cutter boasts high speed and exceptional performance, all while upholding its well-established, outstanding quality.
• In just about 4.5 seconds, it can slice through the D19 (SD390) rebar.
• Despite being cordless, its new brushless motor delivers power comparable to an AC100V machine.
• To enhance durability, the design includes a “Drip-proof/Dust-proof” feature on the motor.
• Furthermore, a vivid battery-level indicator lamp illuminates the motor.
• With a fully charged 6.0 Ah battery, users can continuously cut D19 (SD390) rebar 170 times and D16 (SD345) rebar 230 times.
• In addition to these features, it comes with a manual return valve mechanism, allowing users to retract the cutter rod if issues arise.
• Notably, this product minimizes the impact on water and dust. Keep in mind, though, that our test values serve as a reference.
• Actual cutting speed and the number of cuts might vary based on working conditions.

SPECIFICATIONS OF HCC-19BL

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HCC-16BL

• The D16 cordless rebar cutter not only delivers high speed and top-notch performance but also upholds an established standard of exceptional quality.

  This DC18V cordless cutter swiftly handles the D16 (SD345) rebar, taking only 2.6 seconds for a complete cut.

  Furthermore, it boasts a new brushless motor, and even though it’s cordless, it matches the power of an AC100V machine.

  On top of that, a “Drip-proof / Dust-proof” feature protects the motor.

  Additionally, the machine prominently displays a battery-level indicator lamp on its body.

  Moreover, when users charge the 6.0 Ah battery to its full capacity, they can seamlessly cut the D16 (SD345) rebar up to 285 times, and for the D13 (SD345) rebar, the count goes up to 420 times.

  In the unlikely event of a malfunction, the device offers a manual return valve mechanism, ensuring users can retract the cutter rod safely.

  It’s worth noting that this product has been engineered to minimize its environmental impact, especially on water and dust.

  However, please consider that our provided figures are based on test results, and in practical scenarios, the cutting speed and the number of cuts can fluctuate according to the conditions at hand.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HCC-13DF

This machine offers high-speed cutting that’s roughly twice as fast as traditional machines, effectively doubling work efficiency.
After a single charge, a 3.0Ah battery allows users to continuously cut the D13 rebar up to 240 times.
The cordless design makes it convenient to transport on-site, significantly enhancing work efficiency.
If any issues arise, the device has a manual return valve mechanism to retract the cutter rod.
Notably, this product aims to minimize the effects on water and dust
However, remember that our test results are a reference point, and actual cutting speed and the number of cuts may vary based on working conditions.

SPECIFICATIONS OF HCC-13DF

FEATURE OF HBC-232

• This tool is perfectly compatible with SD390 and SD490 materials
• Which paved the way for modern advancements in high-rise structures, seismic isolation, and seismic design.
• If any issues arise during the operation
  You can simply loosen the return valve by half a turn to retract the cutter rod.
• Afterward, it’s crucial to ensure that you tighten it back securely once you’ve addressed the issue.
• Additionally, the design of this product specifically aims to minimize environmental effects, particularly on water and dust.
• However, it’s worth noting that, based on our testing, the actual number of cuts and the speed of cutting can differ, largely influenced by the specific working conditions.

SPECIFICATIONS

* Our company uses SD490 rebar and performs cutting tests according to our standards. Please use our “SP” spare blade when cutting SD390 and 490 equivalent materials. In addition, as a work inspection or after use, be sure to retighten the bolts on each part and check the carbon brush for wear and damage.

FEATURE OF HBC-225

• This tool is specifically compatible with SD390 and SD490 materials
• It not only champions modern advancements in high-rise structures but also emphasizes seismic isolation and seismic design.
• Moreover, when users encounter an issue, they can simply loosen the return valve by half a turn, which facilitates the retraction of the cutter rod.
• However, once they address the underlying problem, it’s crucial that they tighten the valve again to ensure optimal functioning.
• Additionally, a unique selling point of this product is its ability to significantly reduce its impact on water and dust.
• On another note, based on our comprehensive tests, we’ve observed that the number of cuts, as well as the cutting speed, can vary, largely depending on the prevailing working conditions.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HBC-519

• This product, compatible with SD390 and SD490 materials
  Supports the new era of high-rise construction, seismic isolation, and cutting-edge seismic design.
• Its grip shape not only looks good but also ensures easy handling on-site.
• If you ever face any issues, you can easily loosen the return valve
  By half a turn retrieve the cutter rod, but it’s crucial to remember to tighten it afterward.
• On top of these features, this product actively seeks to reduce the effects of water and dust.
• Furthermore, our tests show that the number of cuts and the cutting speed might differ based on specific working conditions.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

Product Made in Japan
Manufacturer: Ogura
Model: HBC-22

FEATURE OF HBC-22

• This rebar cutter is specifically crafted for D22 rebar.
• If you encounter any issues while using it, simply give the return valve a half turn to retrieve the cutter rod
  But always remember to tighten it back up once you’ve addressed the problem.
• Additionally, this product boasts a design that actively minimizes the effects of water and dust.
• Furthermore, according to our tests
  Both the number of cuts and the cutting speed can change based on the specific conditions you’re working in.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HBC-316

• This product offers both practical cutting ability and durability, all while maintaining an affordable price point.
• If you run into any hiccups during use, simply give the return valve a half twist to retrieve the cutter rod
  But don’t forget to tighten it right back once you’ve resolved the issue.
• Additionally, we’ve crafted this cutter to notably lessen the effects of water and dust.
• Moreover, our tests indicate
  That the cutting speed and the number of cuts can shift based on the specific conditions in which you operate.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HBC-816

• This model caters specifically to professional users.
• It’s fully compatible with SD390 and 490 materials, paving the way for the latest advancements in high-rise construction, seismic isolation, and design.
• Moreover, it boasts a robust motor, complemented by an enhanced shock-absorbing body for optimal performance.
• If you face any challenges while using it
  Simply twist the return valve half a turn to retrieve the cutter rod, but remember to firmly tighten it after resolving the issue.
• While we’ve designed this product to minimize the effects of water and dust
  It doesn’t come with a guarantee against potential damage from these elements.
• Furthermore, our tests show that depending on the working conditions
  There might be variations in the cutting speed and the number of cuts.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura

FEATURE OF HBC-613

• This product stands out for its durability, earning a solid reputation for sustained use.
• Furthermore, it features a switch that incorporates a user-friendly D-shaped grip, making it incredibly convenient.
• If you ever face a hiccup during operation, you can effortlessly adjust the return valve by a half turn to position the cutter rod back.
• Just remember to secure it tightly after addressing the issue.
• On top of this, we designed this tool to actively minimize water and dust impact.
• Moreover, our tests highlight that both the number of cuts and the cutting speed might change based on your specific working conditions.

SPECIFICATIONS

Other items of Ogura

Request the quotation for Ogura