Features

• When installing the equipment, make sure that the power supply is a three-phase AC power supply (P5) and that the electrical wiring is properly completed. Also, ensure that the power supply voltage is within the allowable range.
• During operation, do not approach the machine with your hands or body. Pay attention to the moving parts and edges to avoid accidents.
• When using the pressure foot switch (7200 P5), keep your foot on the switch until the operation is completed. Do not apply excessive force to the switch.
• When using the single-operation foot switch (F type or S type), make sure to release the switch immediately after the operation is completed.
• When using the emergency stop button, press it firmly to ensure the machine stops. After the situation is resolved, turn the button in the direction of the arrow to release it before resuming operation.
• Please perform daily maintenance according to the maintenance schedule in the manual. Regular maintenance is important for ensuring the safety and longevity of the machine.
• Always turn off the main power supply (main breaker) when not in use.

Specification

Other items of Omega System
Request the quotation for Omega System

Features

The mounting bracket allows for easy installation on the floor and a hex nut is used for securing.
It is highly flexible.
The vibration isolation is achieved through a rubber base.
It withstands temperatures up to 40 degrees Celsius.
Standard dimensions

Specification

Tighten with a torque of 36 • 40 • 50 kgf/cm as specified.
The base metal should be clean. Remove oil, dirt, and rust thoroughly.
Apply the specified sealant to the thread of the bolt before installation.”

Other items of Omega System
Request the quotation for Omega System

Features

Turn off and label electrical equipment before maintenance..Secure step ladders on a flat surface to avoid tipping.

Use protective gloves when handling sharp objects..Ventilate areas when working with chemicals to avoid inhaling fumes.

Lift heavy objects with your legs, not your back, and keep loads close..Regularly inspect tools and replace if damaged.

Wear hearing protection with loud machinery to prevent hearing loss..Use safety glasses to protect eyes from debris.

Adhere to equipment maintenance schedules for safety and efficiency..Keep emergency exits and paths clear for quick evacuations.

Specification

Other items of Omega System
Request the quotation for Omega System

Features

This slide is developed as a sibling machine to the NC single slide [NCB-1 type].
It is most suitable for drilling, precise positioning, and can withstand heavy cutting, maintaining accuracy over the long term. It is a linear cutting and angular sliding slide.
The sliding parts undergo heat treatment and high-precision grinding, with special consideration for lubrication grooves and oil reservoirs to maintain high precision.
It is particularly suitable for conventional hydraulic cylinder feed slides (GB-1130 type ball screw feed slides).
Ball screw diameter: 25 mm, lead: 5 mm, C3 class.

Specifications

Other items of Omega System
Request the quotation for Omega System

Features

Specifications

• The first type of charger has a charging efficiency ratio of 145%.
• The second type of charger has a charging efficiency ratio of 185% in 40 minutes.
• Weight: 95kg

Other items of Omega System
Request the quotation for Omega System

Features

Specifications

Other items of Omega System
Request the quotation for Omega System

Features

• The first type of charger has an output current of 180%.
• The second type of charger has an output current of 240% in 60 minutes.
• Weight: 180kg

Other items of Omega System
Request the quotation for Omega System

Features

This rechargeable battery reduces purchases and waste, aiding environmental conservation.
Place it on a charging pad for quick, wireless recharging that improves efficiency.
It connects wirelessly via Bluetooth and NFC for cable-free, easy communication with devices.
With a 15-hour charge life, the battery reliably powers a full workday.
A touch sensor makes for effortless, user-friendly operation.

Slide mounting specifications

• Please do not use the battery in places with high temperature.

• If you discover any initial defects, please call the specified phone number within 7 days.

Other items of Omega System
Request the quotation for Omega System

Specification dimensions

Slide mounting specifications

GA-1 type

GA-2 type

• Specifications may change without notice due to improvements.
• Ifyou have any questions about this product, please contact us separately.

Other items of Omega System
Request the quotation for Omega System

Features

This chuck is a hollow collet chuck with replaceable jaws, and is manufactured in two types with a maximum gripping diameter of 60Ø and 120Ø.
It is connect to a hollow rotary cylinder with a pipe and is used for rear discharge of chips and extrusion of workpieces.
It can use in an extremely wide range of installations, and provides high precision and reliable gripping.

Each part is made of special steel that is heat-treated and ground to ensure long-term accuracy, and can be easily changed by replacing the replacement jaws.
The replacement nails are made from S55C, so they can be heat treated and used as baked nails. We also manufacture special shaped replacement nails.

Specification dimensions

For 60Ø

• Specifications may change without notice due to improvements.
• If you have any questions about this product, please contact us separately.

Other items of Omega System
Request the quotation for Omega System

Features

This chuck is an interchangeable jaw type collet chuck and is available in two types with a maximum gripping diameter of 60Ø and 120Ø. High precision and reliable grasping can be obtained.
Each part is made of special steel that is heat-treated and ground to ensure long-term accuracy. You can easily change the setup by replacing the replacement claws.
The replacement nails are made from S55C and can be heat treated and used as baked nails. We also manufacture special shaped replacement claws.

Specification dimensions:

For 60Ø

We design and manufacture special lined chucks according to the dimensions of each product.

Specifications may change without notice due to improvements.
If you have any questions about this product, please contact us separately.

Other items of Omega System
Request the quotation for Omega System

Feature

• It can be used for various purposes such as rapid forwarding, fine feeding (cutting feeding), and fast reversing of machine tool tables depending on the cycle.
• A rotary switching method is used to switch between rapid feed and fine feed to maintain table accuracy.

Flow rate adjustment: 0.1ℓ~3.0ℓ/min Free flow 12.0ℓ/min Piping PT3/8

Specification dimensions:

• Specifications may change without notice due to improvements.
• If you have any questions about this product, please contact us separately.

Other items of Omega System
Request the quotation for Omega System

Feature

By setting the feed rate of the hydraulic cylinder on the dial scale, it can be freely controlled, and the built-in check valve allows free flow in the opposite direction.

Flow rate: 0.1~5.0L/min Flow rate: 12.0L/min Maximum operating pressure: 2.5MPa

Specification:

• Round shape

• Specifications may change without notice due to improvements.
• If you have any questions regarding this product, please contact us separately.

Other items of Omega System
Request the quotation for Omega System