PLATEC Co., Ltd. | Kouei Japan Trading | Get Quotation

Platec Wooden Edge Wood / Expansion Joint Rod

kvt part2 — Fri, 16 Oct 2020 06:49:06 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Wooden Edge Wood / Expansion Joint Rod

Standard length is 2 meters.
*Wooden expansion joint rod number arrangement (bottom width × height × top width) S or W.


Wooden Edge – 15	Wooden Edge – 20	Wooden Edge – 25	Wooden Edge – 30


Wooden Edge – 15	Wooden Edge – 20	Wooden Edge – 25	Wooden Edge – 30

The post Platec Wooden Edge Wood / Expansion Joint Rod first appeared on Kouei Japan Trading | Get Quotation.

Platec Heat Shrink Tube For Reinforcing Bar Protection

kvt part2 — Fri, 16 Oct 2020 06:04:39 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Heat Shrink Tube

Features

Protection of reinforcing bars and anchor bolts
Prevention of rust on reinforcing bars and anchor bolts
Prevention of mortar adhesion to reinforcing bars
Shrinks when heat is applied, forming a membran

Product Number	Fold Width (mm)	Length (m)	Color	Thickness (mm)
D10	21	200/roll	Yellow	0.1mm
D13	30
D16	36
D19	42
D22~25	46
D29~32	58
D35~38	70
D41	80
D51	90

Shrinkage rate: Vertical 10%, Horizontal 45%
※ The minimum shipping lot for heat shrink tubes is 1 roll (200 meters)
※ We do not sell by cut length

Foam Edge Wood – Physical Properties Table

Test Item	Unit	Test Method	Measured Value
Tensile Strength	MPa	JISK7113	5.62
Tensile Elongation	%	JISK7113	≤5
Chemical Resistance (Weight Change Rate) 30% H₂SO₄	%	JISK7114	+10.8
Chemical Resistance (Weight Change Rate) 40% NaOH	%	JISK7114	+4.8
Chemical Resistance (Weight Change Rate) 5% NaCl	%	JISK7114	+6.3
Bending Strength	MPa	JISK7203-1995	8.18
Bending Elastic Modulus	MPa	JISK7203-1995	492
Load Heat Distortion Temperature	℃	JISK7207-1995	70
Water Absorption	%	JISK7209	3.77

Notes:

For the surface treatment, we use products that contain a minimum of 100% recycled materials.
The production lot varies annually, so please consult us for details.
The values above are for reference only and are not guaranteed.

In accordance with the Public Nuisance Countermeasures Basic Law (Law No. 132 of 1967) and Article 9 provisions on soil contamination standards for environmental standards (Environmental Agency Notification No. 46 of 1996.08.23):

Test Item	Test Result
Cadmium	Below detection limit
Lead	“
Chromium	“
Arsenic	“
Total Mercury	“
Selenium	“

The post Platec Heat Shrink Tube For Reinforcing Bar Protection first appeared on Kouei Japan Trading | Get Quotation.

Platec Expansion Joint Material

kvt part2 — Fri, 16 Oct 2020 04:23:25 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Expansion Joint Material

This is a low-cost type of molded expansion joint material for soil or garage applications. Glass fiber is mixed into the cap for dimensional and shape stability.

Usage

General soil areas (suitable for vehicle traffic) and other similar applications.
It is widely used in many directions because it is lightweight, easy to cut and process, and offers good workability.
Cap Width (mm) Body Width (mm) Height (H) (mm) Cap Height (mm)

20 12 30~ 20

Cap Material: Polyethylene with glass fiber (black)
Body Material: Polyethylene foam (closed-cell foam)

※ If the height (H) is 50mm or less, plastic legs will not be included. Please inform us of the height (H) when placing an order.

The post Platec Expansion Joint Material first appeared on Kouei Japan Trading | Get Quotation.

Platec Curved Molded Plywood

kvt part2 — Fri, 16 Oct 2020 03:19:13 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Curved Molded Plywood

Curved Molded Plywood

Sizes that do not meet the specifications of foamed R edge wood can be substituted with this curved molded plywood.

Inner radius: 100R or more
Outer radius: 70R or more (custom-made)

Please consult with us regarding the size.

※ Specifications are subject to change without notice.
※ Please inquire for sizes.
※ For custom-made products, we will provide an estimate. There may be a delay until shipment.
※ Panel coat surface treatment included.

The post Platec Curved Molded Plywood first appeared on Kouei Japan Trading | Get Quotation.

Platec Black Rubber R Edge Wood

kvt part2 — Fri, 16 Oct 2020 02:51:12 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Black Rubber Joint Rod

Product Number	R (mm)	B (mm)
Black Rubber R Edge Wood-R15	15	15
Black Rubber R Edge Wood-R20	20	17
Black Rubber R Edge Wood-R25	25	24
Black Rubber R Edge Wood-R30	30	27
Black Rubber R Edge Wood-R50	50	45

※ Hardness: 60
※ Specifications are subject to change without notice.
Black Rubber R Edge Wood is estimated as needed, and there may be a delay until shipment.

The post Platec Black Rubber R Edge Wood first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Black Rubber Joint Rod

kvt part2 — Thu, 15 Oct 2020 06:06:34 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Black Rubber Joint Rod

Black Rubber Joint Rod

Item	A x B x C	Taper
Black Rubber Joint Rod	15x10x10	Single,Double
Black Rubber Joint Rod	15x15x10	Single,Double
Black Rubber Joint Rod	20x10x15	Single,Double
Black Rubber Joint Rod	20x15x15	Single,Double
Black Rubber Joint Rod	25x20x20	Single,Double
Black Rubber Joint Rod	25x25x20	Single,Double
Black Rubber Joint Rod	30x20x25	Single,Double
Black Rubber Joint Rod	30x25x25	Single,Double

Hardness: 60
Specifications are subject to change without notice.
For other sizes, please inquire.
Black rubber joint rods are made to order, and there may be a delay in shipping

Black Rubber Square Joint Rod

Item	A (mm)	B (mm)	Length (mm)
Black Rubber Square Joint Rod-10	10	10	2000
Black Rubber Square Joint Rod-15	15	15
Black Rubber Square Joint Rod-20	20	20
Black Rubber Square Joint Rod-25	25	25
Black Rubber Square Joint Rod-30	30	30
Black Rubber Square Joint Rod-30×15	30	15
Black Rubber Square Joint Rod-30×20	30	20
Black Rubber Square Joint Rod-40×20	40	20

Hardness: 60
Specifications are subject to change without notice.
Black rubber square joint rods are made to order, and there may be a delay in shipping.

The post PLATEC Black Rubber Joint Rod first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Steel Faceplate

kvt part2 — Wed, 14 Oct 2020 08:54:24 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Steel Faceplate

*The length (L) varies by size, so please inquire.
*The quantity starts from one piece.

A	B
4.2	3
5.7	4
7.1	5
8.5	6
9.9	7
11.3	8
12.7	9
14.1	10
16.9	12
18.4	13
19.8	14
21.2	15
22.6	16
24.0	17
25.5	18
26.9	19
28.3	20
35.4	25
42.4	30
49.5	35

*The specifications may change without notice.

The post PLATEC Steel Faceplate first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Anchor Wrapper (Support)

kvt part2 — Wed, 14 Oct 2020 08:26:11 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Anchor Wrapper (Support)

Size	Quantity (pcs)
D13〜19 compatible	100×3
D19〜25 compatible	100×3

The post PLATEC Anchor Wrapper (Support) first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Hollow Square Joint Bar

kvt part2 — Wed, 14 Oct 2020 08:01:43 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Hollow Square Joint Bar

Product No.	A (mm)	Package Quantity
Corner-10	10	200 pieces
Corner-15	15	100 pieces
Corner-20	20	100 pieces
Corner-25	25	50 pieces
Corner-30	30	25 pieces

The post PLATEC Hollow Square Joint Bar first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Hollow Joint Rod

kvt part2 — Wed, 14 Oct 2020 07:47:07 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Hollow Joint Rod

Size A×B×C	Quantity	Size A×B×C	Quantity
Hollow 15×10×10 (S)	100	Hollow 15×10×10(W)	100
Hollow 15×15×10 (S)	100	Hollow 15×15×10 (W)	100
Hollow 20×15×15 (S)	100	Hollow 20×10×15(W)	100
Hollow 20×20×15 (S)	100	Hollow 20×15×15(W)	100
Hollow 25×15×20 (S)	50	Hollow 20×20×15(W)	100
Hollow 25×20×20 (S)	50	Hollow 25×15×20 (W)	50
Hollow 25×25×20 (S)	50	Hollow 25×20×20 (W)	50
Hollow 30×15×20 (S)	50	Hollow 25×25×20 (W)	50
Hollow 30×20×20 (S)	50	Hollow 30×15×20 (W)	50
Hollow 30×25×25 (S)	50	Hollow 30×20×20 (W)	50
Hollow 30×25×25(W)	50

Features of hollow facing timber and joint rods

1. You can hammer nails freely.
2. It is resistant to low temperatures, so it can be used in cold regions.
3. It does not absorb water.
4. When peeled off, the peeled surface is clean.
5. There is no need to worry about cracking.
6. Made of polypropylene

The post PLATEC Hollow Joint Rod first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Second Stage Base Rod Jointer Rod

kvt part2 — Wed, 14 Oct 2020 07:34:03 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Second Stage Base Rod

Product Name	Quantity	Product Name	Quantity
PMH-36	Pack of 50	PMH-37	Pack of 50

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Second Stage Base Rod Jointer Rod first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Semicircular Joint Rod Joint Rod

kvt part2 — Wed, 14 Oct 2020 07:26:26 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Semicircular joint rod

Semicircular joint rod

D-10R	D-15R	D-20R
Pack of 100	Pack of 50	Pack of 50

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Semicircular Joint Rod Joint Rod first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Square Joint Bar Joint Rod

kvt part2 — Wed, 14 Oct 2020 06:54:19 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Square joint bar

HB-10	HB-15
200 pieces	Pack of 100

HB-20	HB-25
Pack of 50	Pack of 50

HB-30	HB-40
40 pieces	24 pieces

HB-50
15 pieces

Square joint bar, rectangular

HB-20×10	HB-20×15	HB-30×15
Pack of 100	Pack of 100	Pack of 50

HB-30×20	HB-30×20
Pack of 50	Pack of 50

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Square Joint Bar Joint Rod first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Joint Rod (one, two)

kvt part2 — Wed, 14 Oct 2020 06:10:24 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Joint Rod

Product Name	Size A×B×C	Quantity	Product Name	Size A×B×C	Quantity
PMH-68S	6×6×4(s)	200	PMH-68W	6×6×4(w)	200
PMH-84S	8×6×6(s)	200	PMH-1	9×6×7(w)	200
PMH-2	9×6×7(s)	200	PMH-69W	9×9×6.5(w)	100
PMH-69S	9×9×6.5(s)	200	PMH-45W	10×10×7(w)	100
PMH-45	10×10×8(s)	100	PMH-62	12×9×9(w)	100
PMH-62S	12×9×9(s)	100	PMH-67W	12×12×9(w)	100
PMH-67S	12×12×9(s)	100	PMH-70W	12×15×8(w)	100
PMH-70S	12×15×8(s)	100	PMH-39	15×9×12(w)	100
PMH-39S	15×9×12(s)	100	PMH-44	15×10×10(w)	100
PMH-27	15×10×10(s)	100	PMH-4W	15×10×12(w)	100
PMH-4	15×10×12(s)	100	PMH-3	15×12×11(w)	100
PMH-75	15×12×8(s)	100	PMH-5	15×15×10(w)	100
PMH-3S	15×12×11(s)	100	PMH-66W	15×15×12(w)	100
PMH-40	15×12×13(s)	100	PMH-71W	15×20×10(w)	100
PMH-38	15×15×10(s)	100	PMH-76W	20×10×10(w)	100
PMH-66S	15×15×12(s)	100	PMH-6	20×10×15(w)	100
PMH-71S	15×20×10(s)	100	PMH-29	20×12×14(w)	100
PMH-76S	20×10×10(s)	100	PMH-7	20×15×15(w)	100
PMH-6S	20×10×15(s)	100	PMH-23	20×20×15(w)	100
PMH-28	20×10×18(s)	100	PMH-77W	20×25×10(w)	50
PMH-42	20×12×17(s)	100	PMH-78W	25×10×20(w)	100
PMH-43	20×12×14(s)	100	PMH-65W	25×15×15(w)	50
PMH-8	20×15×15(s)	100	PMH-9	25×15×20(w)	50
PMH-19	20×20×15(s)	100	PMH-11	25×20×20(w)	50
PMH-77S	20×25×10(s)	50	PMH-73W	25×25×10(w)	50
PMH-78S	25×10×20(s)	100	PMH-46	25×25×20(w)	50
PMH-65S	25×15×15(s)	50	PMH-72W	25×30×20(w)	50
PMH-10	25×15×20(s)	50	PMH-74W	30×12×25(w)	50
PMH-12	25×20×20(s)	50	PMH-24	30×15×20(w)	50
PMH-73S	25×25×10(s)	50	PMH-13	30×15×25(w)	50
PMH-20	25×25×20(s)	50	PMH-15	30×20×20(w)	50
PMH-72S	25×30×20(s)	50	PMH-48	30×20×25(w)	50
PMH-74S	30×12×25(s)	50	PMH-25	30×25×15(w)	50
PMH-47	30×15×20(s)	50	PMH-17	30×25×20(w)	50
PMH-14	30×15×25(s)	50	PMH-26	30×25×25(w)	50
PMH-21	30×20×20(s)	50	PMH-59	30×30×20(w)	40
PMH-16	30×20×25(s)	50	PMH-81W	40×20×30(w)	40
PMH-49	30×25×15(s)	50	PMH-50	40×20×35(w)	25
PMH-30	30×25×20(s)	50	PMH-63W	40×25×25(w)	40
PMH-18	30×25×25(s)	50	PMH-32	40×25×30(w)	30
PMH-59S	30×30×20(s)	40	PMH-58	40×30×30(w)	30
PMH-64	30×30×25(s)	25	PMH-82W	50×5×44(w)	70
PMH-83S	30×50×20(s)	30	PMH-56	50×20×40(w)	25
PMH-81S	40×20×30(s)	40	PMH-41	50×30×40(w)	25
PMH-22	40×20×35(s)	25	PMH-79W	50×40×30(w)	20
PMH-63S	40×25×25(s)	40	PMH-80W	50×50×30(w)	15
PMH-51	40×25×30(s)	30
PMH-57	40×30×30(s)	30
PMH-55	50×20×40(s)	25
PMH-31	50×30×40(s)	25
PMH-79S	50×40×30(s)	20
PMH-80S	50×50×40(s)	15

*We have acquired Eco Mark certification for our Platec foam facings/joint bars.
*If you require a size other than the above, we can manufacture it in wood.
*Please contact us for more information .

The post PLATEC Joint Rod (one, two) first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Reverse R Face Wood Foam Material

kvt part2 — Wed, 14 Oct 2020 04:27:54 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Reverse R Face Wood

R	B	Part number	Quantity	R	B	Part number	Quantity
20	20	HC-20	50	50	50	※ HC-50	20
twenty five	twenty five	HC-25	50
30	30	HC-30	40
40	40	HC-40	30

* The corners of HC-50 have been cut.
*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Reverse R Face Wood Foam Material first appeared on Kouei Japan Trading | Get Quotation.

PLATEC R Face Wood Foam Material

kvt part2 — Wed, 14 Oct 2020 04:05:37 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: R Face Wood

R	B	Part number	Quantity	R	B	Part number	Quantity
10	10	HR-10	300	35	35	HR-35	50
15	15	HR-15	200	50	50	HR-50	25
20	20	HR-20	100	70	70	※ HR-70	12
25	25	HR-25	100	100	100	※ HR-100	6
30	30	HR-30	50

* The corners of HR-70 and HR-100 are cut.
Please contact us for details.
*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC R Face Wood Foam Material first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Tapered Face Wood Foam Material

kvt part2 — Wed, 14 Oct 2020 03:53:29 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Tapered Face Wood

A	Part number	Quantity	A	Part number	Quantity	A	Part number	Quantity
20	PKH-220	100	20	PKH-320	100	20	PKH-520	100
30	PKH-230	100	30	PKH-330	100	30	PKH-530	100
50	PKH-250	50	50	PKH-350	50	50	PKH-550	50

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Tapered Face Wood Foam Material first appeared on Kouei Japan Trading | Get Quotation.

PLATEC Right-Angled Trees Foam material

kvt part2 — Wed, 14 Oct 2020 02:48:06 +0000

Manufacturer: PLATEC Co., Ltd.
Product name: Right-Angled Trees

A	Part number	Quantity	A	Part number	Quantity
10	PH-10	200	40	PH-40	50
15	PH-15	200	45	PH-45	50
20	PH-20	200	45	PH-50	50
25	PH-25	100	45	PH-60	30
30	PH-30	100	45	PH-70	20
35	PH-35	100	45	※ PH-100	12

.* The PH-100 now features smooth, cut corners for a sleek design.
*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC Right-Angled Trees Foam material first appeared on Kouei Japan Trading | Get Quotation.

PLATEC HR Series R Molding

kvtpart — Mon, 12 Oct 2020 03:10:57 +0000

Product Made in Japan
Manufacturer: PLATEC Co., Ltd.
Model: HR Series R

R	B	Part number	Quantity
10	10	HR-10	300
15	15	HR-15	200
20	20	HR-20	100
25	25	HR-25	100
30	30	HR-30	50

R	B	Part number	Quantity
35	35	HR-35	50
50	50	HR-50	25
70	70	※ HR-70	12
100	100	※ HR-100	6

* The corners of HR-70 and HR-100 are cut.
Please contact us for details.

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC HR Series R Molding first appeared on Kouei Japan Trading | Get Quotation.

PLATEC PKH Series Taper Molding

kvtpart — Mon, 12 Oct 2020 02:46:24 +0000

Product Made in Japan
Manufacturer: PLATEC Co., Ltd.
Model: PKH Series

A	Product Code	Quantity
20	PKH-220	100
30	PKH-230	100
50	PKH-250	50

A	Product Code	Quantity
20	PKH-320	100
30	PKH-330	100
50	PKH-350	50

A	Product Code	Quantity
20	PKH-520	100
30	PKH-530	100
50	PKH-550	50

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC PKH Series Taper Molding first appeared on Kouei Japan Trading | Get Quotation.

PLATEC PH Series Right-angle Molding

kvtpart — Mon, 12 Oct 2020 02:29:53 +0000

Product Made in Japan
Manufacturer: PLATEC Co., Ltd.
Model: PH Series

A	Product Code	Quantity
10	PH-10	200
15	PH-15	200
20	PH-20	200
25	PH-25	100
30	PH-30	100
35	PH-35	100

A	Product Code	Quantity
40	PH-40	50
45	PH-45	50
50	PH-50	50
60	PH-60	30
70	PH-70	20
100	※ PH-100	12

* The corners of the PH-100 have been cut.

*Platec foam facing/joint bar has obtained Eco Mark certification.

The post PLATEC PH Series Right-angle Molding first appeared on Kouei Japan Trading | Get Quotation.