Features of coupling and bracket

Couplings and Bracket for rotary encoders
Couplings attachable to rotating shafts of Ø4mm to 8mm depending on models.
Bracket B-15 is for CE series.
*C-88 Discontinued in 2020

Coupling of coupling and bracket

Bracket

Other items of Line Seiki

Request the quotation for Line Seiki

Features Of CE Series

This compact and lightweight rotary encoder, known for its efficient power consumption and voltage output, boasts outer dimensions of φ30 (with a Shaft φ 4) and a PCD of 22, making it an ideal choice for various industrial applications.

Description Of CE Series

• The CE Series is an incremental encoder that generates a certain number of pulses for every complete revolution.
• Our CE Series is fully compatible with our counters.
• The CE Series is available in different Pulse per Revolution (PPR) ranging from 60 PPR to 500 PPR.

Model

Add “ S “ at the end of Model No. for 1 signal output (only signal A).
Ex. CE-100S

Connection

Output Waveform

Output Wiring

Handling Guild

– To protect an encoder from any shock or vibration that may be caused by the joining machine, put the center of encoder’s shaft and machine’s shaft together without aberration and inclination. Use our coupling models for the right joining.
– Be sure to wire the encoder correctly as wrong wiring may cause the inner circuit breakdown.
– Do not wire the cable parallel with other power lines from the protection against the noise.
– Use a shield wire for the extension of cable.

Specification

Application

Length Measuring

Counters and rotary encoders find application in measuring the length of textiles, paper, plastic film, and other materials.

Other items of Line Seiki

Request the quotation for Line Seiki

Description

The CB Series is an incremental encoder designed to generate a specific number of pulses for each complete revolution. This series is fully compatible with our counters and offers various Pulse per Revolution (PPR) options, ranging from 100 PPR to 2500 PPR. Furthermore, it boasts a universal mounting hole configuration, which guarantees a straightforward replacement of alternative encoders. Additionally, it holds the CE compliance certification.

Model

Circut Of Output Signal

Connection

Specification

ELECTRICAL
Model	CB-□HC	CB-□LC	CB-□LV	CB-□LD
Power Supply (Ripple 3% max.)	DC12 – 24V ±10%	DC5 – 12V ±10%		DC5V ±10%
Current Consumption	50 mA max.
Output	Open Collector		Voltage	Line Driver
Output Signal	90°Quadrature + Zero Marking
Output Phase	A,B,Z			A,B,Z,,,
Output Capacity	Sink Current: 35mA max. Residual Voltage: 0.5V max.		Sink Current 20 mA max.	±20mA
Max. Applied Voltage	30V max.
Output Voltage	–		H:Supply Voltage -1 V min. L:0.5 V max.	H:2.5 V min. L:0.5 V max.
Max. Freq. Response	100 kHz
Signal Rise/Fall Time (Pull-up resistor 2.2kΩ, 1m Cable)	1μs max.			0.1μs max.
Insulation Resistance	20MΩ min.(DC100V Megger)
Output Impedance (Voltage Output only)	–		2.2kΩ	–
Cable Length	500mm
Outside Diameter	Փ5.1mm

Waveform

These figures show the waveforms when the shaft is rotated Clockwise (CW) when viewing towards the encoder shaft.
A pulse at Signal A should be completed within the period that Signal Z is at H-Level.

Dimension

Application

Length Measuring

Counters and rotary encoders are versatile tools suitable for length measurement across various materials such as textiles, paper, and plastic film, among others.

Other items of Line Seiki

Request the quotation for Line Seiki