Sakae Tsushin Kogyo | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Mon, 15 Jun 2026 17:59:25 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png Sakae Tsushin Kogyo | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 Sakae KSM22F Inductance https://koueitrading.com/global/product/sakae-ksm22f-inductance/ Mon, 15 Jun 2020 17:44:43 +0000 https://koueitrading.com/global/?post_type=product&p=205457 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: KSM22F Standard Model Numbers Type Model Number Bushingmount type KSM22F-5 KSM22FI-5 Servomount type KSM22FS-5 General Specifications Item KSM22F KSM22FI KSM22FS Current Consumption Approx. 3.5mA Independent Linearity Tolerance ±0.5%FS (FS = 100°) Mechanical Rotating Angle 360° (Endless) Effective Electrical Angle ±50° (100°) Applied Voltage 5V D.C. Load Resistance 10kΩ min. […]

The post Sakae KSM22F Inductance first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: KSM22F

KSM22F

Standard Model Numbers

Type Model Number
Bushingmount type KSM22F-5
KSM22FI-5
Servomount type KSM22FS-5

General Specifications

Item KSM22F KSM22FI KSM22FS
Current Consumption Approx. 3.5mA
Independent Linearity Tolerance ±0.5%FS (FS = 100°)
Mechanical Rotating Angle 360° (Endless)
Effective Electrical Angle ±50° (100°)
Applied Voltage 5V D.C.
Load Resistance 10kΩ min.
Output Voltage Range Approx. 10% ~ 90% Vin · FS (FS = 100°)
Output Temperature Characteristic Within ±2.5% Vout·FS
Drift at Center Position Within ±0.5% Vout·FS
Operating Temperature Range −40°C ~ +105°C
Storage Temperature Range −40°C ~ +105°C
Mass Approx. 15g
Starting Torque (mN·m / gf·cm) Within 1 (10) Within 3 (30) Within 0.2 (2)

Environmental Specifications

Item KSM22F KSM22FI KSM22FS
Thermal Shock 5 cycles −50°C ↔ +105°C
Exposure at Low Temperature 24 hours at −50°C
Exposure at High Temperature 1,000 hours at +105°C
Moisture Resistance 40°C, 95%RH, 120 hours
Vibration 10 ~ 2,000Hz, 196m/s², 12 hours
Shock 980m/s² (18 times)
Life Expectancy (shaft revolutions) Approx. 100,000,000 Approx. 10,000,000
Approx. 200,000,000

Special Specifications Available

Category Description
Applied Voltage Possible range from 3V D.C. to 10V D.C.
Effective Electrical Rotating Angle Possible range from ±25° to ±80°
Shaft Machining Special machining on the shaft

Note: In the case of potentiometers with special specifications, general and environmental specifications may change. Please consult the manufacturer in advance.

The post Sakae KSM22F Inductance first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae HSM22 Hall effect IC https://koueitrading.com/global/product/sakae-hsm22-hall-effect-ic/ Mon, 15 Jun 2020 17:40:17 +0000 https://koueitrading.com/global/?post_type=product&p=205451 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: HSM22 General Specifications Item Specification Current Consumption Single output: Max. 16mA Dual output: Max. 32mA Independent Linearity Tolerance ±0.5%FS (FS = 360°) Mechanical Rotating Angle 360° (Endless) Electrical Angle 360° Applied Voltage 5V ±10% D.C. Load Resistance 10kΩ min Effective Output 10% ±3% Vin ~ 90% ±3% Vin Output […]

The post Sakae HSM22 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: HSM22

HSM22

General Specifications

Item Specification
Current Consumption Single output: Max. 16mA
Dual output: Max. 32mA
Independent Linearity Tolerance ±0.5%FS (FS = 360°)
Mechanical Rotating Angle 360° (Endless)
Electrical Angle 360°
Applied Voltage 5V ±10% D.C.
Load Resistance 10kΩ min
Effective Output 10% ±3% Vin ~ 90% ±3% Vin
Output Temperature Characteristics Within ±0.3% Vout/FS
Operating Temperature Range −40°C ~ +105°C
Storage Temperature Range −40°C ~ +105°C
Mass Approx. 20g
Rotating Torque Within 5mN·m (within 50gf·cm)

Environmental Specifications

Item Specification
Thermal Shock 5 cycles −40°C ↔ +105°C
Exposure at Low Temperature 24 hours at −40°C
Exposure at High Temperature 1,000 hours at +105°C
Vibration 10 to 2,000Hz, 196m/s², 12 hours
Shock 980m/s², 6ms (18 times)
Rotational Life Expectancy Approx. 50,000,000 shaft revolutions
EMS Tolerance 100V/m (80MHz ~ 1GHz, 1kHz Sine wave, 80% Amplitude Modulation)
ESD Tolerance ±8kV contact discharge
±15kV air discharge
(Based on IEC 61000-4-2)

Output Characteristics

Terminal Connection Diagram

Special Specifications Available

Category Description
Effective Electrical Angle 90°, 180°, 270°, or arbitrary angles
Shaft Machining Special machining on the shaft
Output Configuration Cross output, Parallel output, Dual independent output
Applied Voltage Option 12V / 24V
PWM Output Available
Low Current Consumption Mode Within 11mA

Note: Rotational life expectancy may differ from the specification depending on operating conditions.

The post Sakae HSM22 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae HSM14 Hall effect IC https://koueitrading.com/global/product/sakae-hsm14-hall-effect-ic/ Mon, 15 Jun 2020 17:35:15 +0000 https://koueitrading.com/global/?post_type=product&p=205445 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: HSM14 General Specifications Item Specification Current Consumption Single output: Max. 16mA Dual output: Max. 32mA Independent Linearity Tolerance ±1%FS (FS = 360°) Mechanical Rotating Angle 360° (Endless) Electrical Angle 360° Applied Voltage 5V ±10% D.C. Load Resistance 10kΩ min Effective Output 10%Vin ±3%Vin ~ 90%Vin ±3%Vin Output Temperature Characteristics […]

The post Sakae HSM14 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: HSM14

HSM14

General Specifications

Item Specification
Current Consumption Single output: Max. 16mA
Dual output: Max. 32mA
Independent Linearity Tolerance ±1%FS (FS = 360°)
Mechanical Rotating Angle 360° (Endless)
Electrical Angle 360°
Applied Voltage 5V ±10% D.C.
Load Resistance 10kΩ min
Effective Output 10%Vin ±3%Vin ~ 90%Vin ±3%Vin
Output Temperature Characteristics Within ±0.3% Vout/FS
Operating Temperature Range −40°C ~ +105°C
Storage Temperature Range −40°C ~ +105°C
Mass Approx. 11g
Rotating Torque Within 5mN·m (within 50gf·cm)
Protection Grade (IP) IP65

Environmental Specifications

Item Specification
Thermal Shock 5 cycles −40°C ↔ +105°C
Exposure at Low Temperature 24 hours at −40°C
Exposure at High Temperature 1,000 hours at +105°C
Vibration 10 to 2,000Hz, 196m/s², 12 hours
Shock 980m/s², 6ms (18 times)
Rotational Life Expectancy Approx. 100,000,000 shaft revolutions
Radiated Electromagnetic Field Immunity 100V/m (80MHz ~ 6GHz, ISO11452-1~3)
ESD Immunity ±8kV contact discharge
±15kV air discharge
(Based on IEC 61000-4-2)

Output Characteristics

Terminal Connection Diagram

Special Specifications Available

Category Description
Effective Electrical Angle 90°, 180°, 270°, or arbitrary angles
Shaft Machining Special machining on the shaft
PWM Output Available
Output Configuration Cross output, Parallel output, Dual independent output
Low Current Consumption Mode Within 11mA (slow mode)

Use Caution

Organic solvents such as acetone or alcohol solutions such as ethanol may leave chemical burn scars on plastic surfaces. For applications requiring chemical resistance (organic solvent resistance, alcohol resistance, etc.), additional precautions should be taken.

The post Sakae HSM14 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae HSM10 Hall effect IC https://koueitrading.com/global/product/sakae-hsm10-hall-effect-ic/ Mon, 15 Jun 2020 17:28:02 +0000 https://koueitrading.com/global/?post_type=product&p=205438 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: HSM10 General Specifications Item Specification Current Consumption Single output: Max. 13mA Dual output: Max. 26mA Independent Linearity Tolerance ±0.5%FS (FS = 360°) Mechanical Rotating Angle 360° (Endless) Electrical Angle 360° Applied Voltage 5V ±10% D.C. Load Resistance 10kΩ min Effective Output 10%Vin ±3%Vin ~ 90%Vin ±3%Vin Output Temperature Characteristics […]

The post Sakae HSM10 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: HSM10

HSM10

General Specifications

Item Specification
Current Consumption Single output: Max. 13mA
Dual output: Max. 26mA
Independent Linearity Tolerance ±0.5%FS (FS = 360°)
Mechanical Rotating Angle 360° (Endless)
Electrical Angle 360°
Applied Voltage 5V ±10% D.C.
Load Resistance 10kΩ min
Effective Output 10%Vin ±3%Vin ~ 90%Vin ±3%Vin
Output Temperature Characteristics Within ±0.3% Vout/FS
Operating Temperature Range −40°C ~ +105°C
Storage Temperature Range −40°C ~ +105°C
Mass Approx. 14g (not including attached nut and inner teeth washer)
Rotating Torque Within 2mN·m (within 20gf·cm)
Protection Grade (IP) IP65

Environmental Specifications

Item Specification
Temperature Cycle 5 cycles −40°C ↔ +105°C
Exposure at Low Temperature 24 hours at −40°C
Exposure at High Temperature 1,000 hours at +105°C
Vibration 10 to 2,000Hz, 196m/s², 12 hours
Shock 980m/s², 6ms (18 times)
Rotational Life Expectancy Approx. 100,000,000 shaft revolutions
Radiated Electromagnetic Field Immunity 100V/m (80MHz ~ 6GHz, ISO11452-1~3)
ESD Immunity ±4kV contact discharge
±8kV air discharge
(Based on IEC 61000-4-2)

Output Characteristics

Terminal Connection Diagram

Special Specifications Available

Category Description
Effective Electrical Angle 90°, 180°, 270°, or arbitrary angles
Shaft Machining Special machining on the shaft
PWM Output Available upon consultation
Output Configuration Cross output, parallel output, dual independent output
Mounting Option Mounting flange

Note: Rotational life expectancy may differ from specifications depending on actual usage conditions.

The post Sakae HSM10 Hall effect IC first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP50A Conductive Plastic https://koueitrading.com/global/product/sakae-fcp50a-conductive-plastic/ Mon, 15 Jun 2020 17:18:20 +0000 https://koueitrading.com/global/?post_type=product&p=205435 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP50A General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k, 200k, 500k (Ω) Total Resistance Tolerance Standard Class ±10% (K) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.2% Super Precision Class ±0.05% Resolution Essentially infinite Output Smoothness […]

The post Sakae FCP50A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP50A

Sakae FCP50A Conductive Plastic

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k, 200k, 500k (Ω)
Total Resistance Tolerance Standard Class ±10% (K)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.2%
Super Precision Class ±0.05%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 3.0W
Electrical Travel 350° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 4mN·m (40gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 70g

Special Specifications Available

Category Description
Extra Taps Available up to 3 taps
Multi-ganged Available up to 7 gangs (Housing length is extended by 12mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 15mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP50A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP40A Conductive Plastic https://koueitrading.com/global/product/sakae-fcp40a-conductive-plastic/ Mon, 15 Jun 2020 17:16:01 +0000 https://koueitrading.com/global/?post_type=product&p=205432 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP40A General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k, 200k (Ω) Total Resistance Tolerance Standard Class ±10% (K) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.25% Super Precision Class ±0.1% Resolution Essentially infinite Output Smoothness Within […]

The post Sakae FCP40A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP40A

Sakae FCP40A Conductive Plastic

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k, 200k (Ω)
Total Resistance Tolerance Standard Class ±10% (K)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.25%
Super Precision Class ±0.1%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 2.0W
Electrical Travel 340° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 3mN·m (30gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 60g

Special Specifications Available

Category Description
Extra Tap Available up to 3 taps
Multi-ganged Available up to 7 gangs (Housing length is extended by 12mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 15mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP40A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP30A Conductive Plastic https://koueitrading.com/global/product/sakae-fcp30a-conductive-plastic/ Mon, 15 Jun 2020 17:12:41 +0000 https://koueitrading.com/global/?post_type=product&p=205429 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP30A General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.0% Precision Class ±0.5% Super Precision Class ±0.2% Resolution Essentially infinite Output Smoothness Within 0.1% […]

The post Sakae FCP30A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP30A

Sakae FCP30A Conductive Plastic

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.0%
Precision Class ±0.5%
Super Precision Class ±0.2%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.5W
Electrical Travel 340° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 2mN·m (20gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 25g

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Multi-ganged Available up to 5 gangs (Housing length is extended by 8.5mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 10mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP30A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP22A Conductive Plastic https://koueitrading.com/global/product/sakae-fcp22a-conductive-plastic/ Mon, 15 Jun 2020 17:09:51 +0000 https://koueitrading.com/global/?post_type=product&p=205425 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP22A General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.0% Precision Class ±0.5% Super Precision Class ±0.25% Resolution Essentially infinite Output Smoothness Within 0.1% […]

The post Sakae FCP22A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP22A

Sakae FCP22A Conductive Plastic

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.0%
Precision Class ±0.5%
Super Precision Class ±0.25%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.0W
Electrical Travel 320° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 1.5mN·m (15gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 15g

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Multi-ganged Available up to 5 gangs (Housing length is extended by 8.5mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 10mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP22A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCPS22AC Conductive Plastic https://koueitrading.com/global/product/sakae-fcps22ac-conductive-plastic/ Mon, 15 Jun 2020 17:06:11 +0000 https://koueitrading.com/global/?post_type=product&p=205421 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCPS22AC General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±15% (L) Precision Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.0% Precision Class ±0.5% Resolution Essentially infinite Output Smoothness Within 0.1% […]

The post Sakae FCPS22AC Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCPS22AC

FCPS22AC

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±15% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.0%
Precision Class ±0.5%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.0W
Electrical Travel 320° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 20g

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 20mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm)
Shaft Machining Special machining on the shaft
Bearing Option With ball bearings incorporated
The post Sakae FCPS22AC Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP22R Plastic Housing Conductive Plastic https://koueitrading.com/global/product/sakae-fcp22r-plastic-housing-conductive-plastic/ Mon, 15 Jun 2020 17:00:05 +0000 https://koueitrading.com/global/?post_type=product&p=205417 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP22R General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±15% (L) Precision Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.5% Precision Class ±1.0% Resolution Essentially infinite Output Smoothness Within […]

The post Sakae FCP22R Plastic Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP22R

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±15% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.5%
Precision Class ±1.0%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.0W
Electrical Travel 340° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 20g

Standard Dimensions

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0).

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) & bushing with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP22R Plastic Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP22E Plastic Housing Conductive Plastic https://koueitrading.com/global/product/sakae-fcp22e-plastic-housing-conductive-plastic/ Mon, 15 Jun 2020 16:56:40 +0000 https://koueitrading.com/global/?post_type=product&p=205413 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP22E General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±15% (L) Precision Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.5% Precision Class ±1.0% Resolution Essentially infinite Output Smoothness Within […]

The post Sakae FCP22E Plastic Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP22E

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±15% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.5%
Precision Class ±1.0%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.0W
Electrical Travel 320° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 20g

Standard Dimensions

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0).

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 20mm length)
Multi-ganged Available up to 10 gangs
Stopper Option Rotating angle is 320° and stopper strength is 0.6N·m (6kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) & bushing with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP22E Plastic Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP22AC Metal Housing Conductive Plastic https://koueitrading.com/global/product/sakae-fcp22ac-metal-housing-conductive-plastic/ Mon, 15 Jun 2020 16:50:56 +0000 https://koueitrading.com/global/?post_type=product&p=205409 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP22AC General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±15% (L) Precision Class ±10% (K) Independent Linearity Tolerance Standard Class ±1.5% Precision Class ±1.0% Resolution Essentially infinite Output Smoothness Within 0.1% […]

The post Sakae FCP22AC Metal Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP22AC

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±15% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±1.5%
Precision Class ±1.0%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 2% C.R.V.
Power Rating 1.0W
Electrical Travel 320° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 20g

Standard Dimensions

Sakae FCP22AC Metal Housing Conductive Plastic

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0).

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 20mm length)
Stopper Option Rotating angle is 320° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) & bushing with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP22AC Metal Housing Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP12A Conductive Plastic https://koueitrading.com/global/product/sakae-fcp12a-conductive-plastic/ Mon, 15 Jun 2020 16:45:17 +0000 https://koueitrading.com/global/?post_type=product&p=205405 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP12A Standard Dimensions General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, 20k, 50k, 100k (Ω) Total Resistance Tolerance Standard Class ±15% (L) Precision Class ±10% (K) Independent Linearity Tolerance Standard Class ±2.0% Precision Class ±1.0% Resolution Essentially infinite Output Smoothness […]

The post Sakae FCP12A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP12A

Standard Dimensions

FCP12A

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±15% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±2.0%
Precision Class ±1.0%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 3% C.R.V.
Power Rating 0.2W
Electrical Travel 300° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 1mN·m (10gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 5g

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 1mm dia. and 10mm length)
Stopper Option Rotating angle is 310° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP12A Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae FCP12AC Conductive Plastic https://koueitrading.com/global/product/sakae-fcp12ac-conductive-plastic/ Mon, 15 Jun 2020 16:41:17 +0000 https://koueitrading.com/global/?post_type=product&p=205402 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: FCP12AC Standard Dimensions Notes: 1 set of inner teeth washer & hex nut is attached. Please process the mounting hole on the panel. The diameter should be 7.14 mm (+0.05 / 0). General Specifications Item Specification Standard Resistance Values 1k, 2k, 5k, 10k (Ω) Special Practical Resistance Values 500, […]

The post Sakae FCP12AC Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: FCP12AC

Standard Dimensions

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 7.14 mm (+0.05 / 0).

General Specifications

Item Specification
Standard Resistance Values 1k, 2k, 5k, 10k (Ω)
Special Practical Resistance Values 500, 20k, 50k, 100k (Ω)
Total Resistance Tolerance Standard Class ±5% (L)
Precision Class ±10% (K)
Independent Linearity Tolerance Standard Class ±2.0%
Precision Class ±1.0%
Resolution Essentially infinite
Output Smoothness Within 0.1% against input voltage
Item Specification
Contact Resistance Variation Within 3% C.R.V.
Power Rating 0.2W
Electrical Travel 300° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 500V D.C.
Dielectric Strength 1 minute at 500V A.C.
Starting Torque Within 2mN·m (20gf·cm)
Resistance Temperature Coefficient ±400p.p.m./°C
Mass Approx. 8g

Special Specifications Available

Category Description
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 1mm dia. and 10mm length)
Stopper Option Rotating angle is 310° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) & bushing with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae FCP12AC Conductive Plastic first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP50 Wirewound https://koueitrading.com/global/product/sakae-cp50-wirewound/ Mon, 15 Jun 2020 16:38:04 +0000 https://koueitrading.com/global/?post_type=product&p=205399 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP50 General Specifications Item Specification Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ Max. Practical Resistance Value 50kΩ Total Resistance Tolerance Standard Class ±3% (H) Precision Class ±1% (F) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.1% (±0.2% in case of within 2kΩ) Power […]

The post Sakae CP50 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP50

Sakae CP50 Wirewound

General Specifications

Item Specification
Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ
Max. Practical Resistance Value 50kΩ
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.1%
(±0.2% in case of within 2kΩ)
Power Rating 1.5W
Item Specification
Noise Within 100Ω E.N.R.
Electrical Travel 355° ±3°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 75g

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) No. of Wire Turns Resist. Wire Used
50 500 Cu-Ni
100 650 Cu-Ni
200 800 Cu-Ni
500 1,100 Ni-Cr
1k 1,000 Ni-Cr
2k 1,250 Ni-Cr
5k 1,810 Ni-Cr
10k 2,180 Ni-Cr
20k 2,780 Ni-Cr
※50k 3,500 Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Category Description
Lower Resistance Values 10Ω, 20Ω
Extra Taps Available up to 10 taps
Multi-ganged Available up to 7 gangs (Housing length is extended by 12mm per gang)
Bushing Type Bushing mount type
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 15mm length)
Spring Return Device Incorporated (Automatically returning to the zero position)
Stopper Option Rotating angle is 330° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae CP50 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP45 Wirewound https://koueitrading.com/global/product/sakae-cp45-wirewound/ Mon, 15 Jun 2020 16:33:19 +0000 https://koueitrading.com/global/?post_type=product&p=205396 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP45 General Specifications Item Specification Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ Max. Practical Resistance Value 50kΩ Total Resistance Tolerance Standard Class ±3% (H) Precision Class ±1% (F) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.1% (±0.2% in case of within 2kΩ) Power […]

The post Sakae CP45 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP45

General Specifications

Item Specification
Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ
Max. Practical Resistance Value 50kΩ
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.1%
(±0.2% in case of within 2kΩ)
Power Rating 1.0W
Item Specification
Noise Within 100Ω E.N.R.
Electrical Travel 355° ±3°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 4mN·m (40gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 55g

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) No. of Wire Turns Resist. Wire Used
50 450 Cu-Ni
100 570 Cu-Ni
200 720 Cu-Ni
500 950 Ni-Cr
1k 820 Ni-Cr
2k 1,040 Ni-Cr
5k 1,430 Ni-Cr
10k 1,790 Ni-Cr
20k 2,280 Ni-Cr
※50k 3,100 Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Category Description
Lower Resistance Values 10Ω, 20Ω
Extra Taps Available up to 5 taps
Multi-ganged Available up to 7 gangs (Housing length is extended by 12mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 15mm length)
Bushing Type Bushing mount type
Stopper Option Rotating angle is 330° and stopper strength is 0.9N·m (9kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae CP45 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP30 Wirewound https://koueitrading.com/global/product/sakae-cp30-wirewound/ Mon, 15 Jun 2020 16:29:25 +0000 https://koueitrading.com/global/?post_type=product&p=205393 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP30 General Specifications Item Specification Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ Max. Practical Resistance Value 50kΩ Total Resistance Tolerance Standard Class ±3% (H) Precision Class ±1% (F) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.15% (±0.2% in case of within 5kΩ) Power […]

The post Sakae CP30 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP30

Sakae CP30 Wirewound

General Specifications

Item Specification
Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k, 20kΩ
Max. Practical Resistance Value 50kΩ
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.15%
(±0.2% in case of within 5kΩ)
Power Rating 0.75W
Item Specification
Noise Within 100Ω E.N.R.
Electrical Travel 355° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 2mN·m (20gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 20g

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) No. of Wire Turns Resist. Wire Used
50 310 Cu-Ni
100 390 Cu-Ni
200 500 Cu-Ni
500 420 Ni-Cr
1k 600 Ni-Cr
2k 770 Ni-Cr
5k 1,090 Ni-Cr
10k 1,400 Ni-Cr
20k 1,800 Ni-Cr
※50k 2,670 Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Category Description
Lower Resistance Values 10Ω, 20Ω
Extra Taps Available up to 3 taps
Multi-ganged Available up to 5 gangs (Housing length is extended by 8.5mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 10mm length)
Stopper Option Rotating angle is 330° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae CP30 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP22 Wirewound https://koueitrading.com/global/product/sakae-cp22-wirewound/ Mon, 15 Jun 2020 16:24:32 +0000 https://koueitrading.com/global/?post_type=product&p=205390 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP22 General Specifications Item Specification Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10kΩ Max. Practical Resistance Value 20kΩ Total Resistance Tolerance Standard Class ±3% (H) Precision Class ±1% (F) Independent Linearity Tolerance Standard Class ±0.5% Precision Class ±0.2% (±0.3% in case of within 1kΩ) Power Rating […]

The post Sakae CP22 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP22

General Specifications

Item Specification
Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10kΩ
Max. Practical Resistance Value 20kΩ
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.2%
(±0.3% in case of within 1kΩ)
Power Rating 0.5W
Item Specification
Noise Within 100Ω E.N.R.
Electrical Travel 355° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 1.5mN·m (15gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 15g

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) No. of Wire Turns Resist. Wire Used
50 300 Cu-Ni
100 370 Cu-Ni
200 470 Cu-Ni
500 450 Ni-Cr
1k 570 Ni-Cr
2k 740 Ni-Cr
5k 1,000 Ni-Cr
10k 1,270 Ni-Cr
※20k 1,670 Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Category Description
Lower Resistance Values 10Ω, 20Ω
Extra Taps Available up to 2 taps
Multi-ganged Available up to 5 gangs (Housing length is extended by 8.5mm per gang)
Shaft Extension Front and rear extension (Rear shaft with 3mm dia. and 10mm length)
Stopper Option Rotating angle is 330° and stopper strength is 0.3N·m (3kgf·cm)
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ3.175mm) with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae CP22 Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP22TE Plastic Housing Wirewound https://koueitrading.com/global/product/sakae-cp22te-plastic-housing-wirewound/ Mon, 15 Jun 2020 16:16:13 +0000 https://koueitrading.com/global/?post_type=product&p=205387 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP22TE Standard Dimensions Notes: 1 set of inner teeth washer & hex nut is attached. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0). General Specifications General Specifications  Standard Resistance Range 50,100,200,500,1k,2k,5k,10kΩ Max. Practical Resistance Value 20kΩ Total Resistance Tolerance Standard […]

The post Sakae CP22TE Plastic Housing Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP22TE

Standard Dimensions

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0).

General Specifications

General Specifications 
Standard Resistance Range 50,100,200,500,1k,2k,5k,10kΩ
Max. Practical Resistance Value 20kΩ
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.25%
(±0.35% in case of within 1kΩ)
Power Rating 0.5W
General Specifications 
Noise Within 100Ω E.N.R.
Electrical Travel 320° ±5°
Mechanical Travel 320° (+10° / 0°)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 20g
Stopper Strength Approx. 0.6N·m (6kgf·cm)
Residual Resistance Within 3% (1kΩ or lower)
Within 1% (over 1kΩ)

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) 50 100 200 500 1k 2k 5k 10k ※20k
No. of Wire Turns 300 330 410 390 520 640 900 1,050 1,370
Resist. Wire Used Cu-Ni Cu-Ni Cu-Ni Ni-Cr Ni-Cr Ni-Cr Ni-Cr Ni-Cr Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Category Description
Lower Resistance Values 10Ω, 20Ω
Extra Tap Available up to 1 tap
Shaft Extension Front and rear extension (Rear shaft with 6mm dia. and 20mm length)
Multi-ganged Available up to 10 gangs
Electrical Travel Special electrical travel available
Shaft Dimension Shaft dia. (φ6.35mm) & bushing with inch dimension
Shaft Machining Special machining on the shaft
The post Sakae CP22TE Plastic Housing Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Sakae CP22C Metal Housing Wirewound https://koueitrading.com/global/product/sakae-cp22c-metal-housing-wirewound/ Mon, 15 Jun 2020 16:03:56 +0000 https://koueitrading.com/global/?post_type=product&p=205384 Manufacturer: Sakae Tsushin Kogyo Co., Ltd Model: CP22C Notes: 1 set of inner teeth washer & hex nut is attached. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0). General Specifications Item Specification Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k Ω Max. Practical Resistance […]

The post Sakae CP22C Metal Housing Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Sakae Tsushin Kogyo Co., Ltd
Model: CP22C

CP22C

Notes:

  1. 1 set of inner teeth washer & hex nut is attached.
  2. Please process the mounting hole on the panel. The diameter should be 10.32 mm (+0.05 / 0).

General Specifications

Item Specification
Standard Resistance Range 50, 100, 200, 500, 1k, 2k, 5k, 10k Ω
Max. Practical Resistance Value 20k Ω
Total Resistance Tolerance Standard Class ±3% (H)
Precision Class ±1% (F)
Independent Linearity Tolerance Standard Class ±0.5%
Precision Class ±0.25%
(±0.35% in case of within 1kΩ)
Power Rating 0.5W
Noise Within 100Ω E.N.R.
Electrical Travel 355° ±5°
Mechanical Travel 360° (Endless)
Insulation Resistance Over 1,000MΩ at 1,000V D.C.
Dielectric Strength 1 minute at 1,000V A.C.
Starting Torque Within 5mN·m (50gf·cm)
Resistance Temperature Coefficient ±20 p.p.m./°C
Mass Approx. 23g

Standard Resistance Values / No. of Wire Turns / Resistance Wire Used

Resist. Value (Ω) 50 100 200 500 1k 2k 5k 10k ※20k
No. of Wire Turns 300 370 470 450 570 740 1,000 1,270 1,670
Resist. Wire Used Cu-Ni Cu-Ni Cu-Ni Ni-Cr Ni-Cr Ni-Cr Ni-Cr Ni-Cr Ni-Cr

Note: Mark ※ shows special high resistance value.

Special Specifications Available

Available Options
Lower resistance values (10Ω, 20Ω)
Extra tap (Available up to 1 tap)
Shaft with front and rear extension (Rear shaft with 3mm dia. and 20mm length)
With stopper (Rotating angle is 320° and stopper strength is 0.9N·m [9kgf·cm])
Special electrical travel
Shaft dia. (φ6.35mm) & bushing with inch dimension
Special machining on the shaft
The post Sakae CP22C Metal Housing Wirewound first appeared on Kouei Japan Trading | Get Quotation.]]>