Sanwa Supply | Kouei Japan Trading | Get Quotation

Sanwa Supply CHE-AC1 Low Pressure Non-contact AC Voltage Detector

kvt part2 — Tue, 23 Jun 2020 11:07:38 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-AC1

Features of CHE-AC1

It is a non-contact specification voltage detector that supports AC12V to 1000V.

We will inform you of the voltage detection by LED and buzzer.

Comes with an LED light to illuminate your hand.

It is an economical AAA battery specification.

With a clip, it can be stored in a chest pocket.

Specifications

Voltage range	AC12V-1000V, 50 / 60Hz
Automatic power off	3 minutes
Battery level notification	Power button blinks 3 times + alarm
Voltage detection	Buzzer alarm + red LED blinking
Voltage level indicator	(Low) Orange LED x 2 lit (Middle) Orange LED x 4 lit (High) Orange LED, Red LED all lit
Light	With LED light
Power supply	2 AAA batteries
Size	W23 × D156 × H26mm
Weight	35g
Set	Main unit, AAA batteries x 2 (for testing), instruction manual / warranty

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-AC1 Low Pressure Non-contact AC Voltage Detector first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-WD2 Cup Type Anemometer

kvt part2 — Tue, 23 Jun 2020 11:07:34 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-WD2

Stable measurement is possible even if the wind direction suddenly changes !

Cup type anemometer

It is a digital anemometer with a temperature measurement function that uses a cup type. Stable measurement is possible even if the wind direction suddenly changes. Since the temperature can be checked when measuring the wind speed, it can be used for wind power measurement in a wide range of fields such as outdoor events, sports competitions, golf, windsurfing, work sites, agriculture, and fishing.
In addition, since it is dust-proof and drip-proof IP54, it can be used outdoors with peace of mind.

Cup type that can respond to changes in wind direction

This product uses a cup-type measurement method. Stable measurement is possible even if the wind direction suddenly changes.
Equipped with a temperature measurement function, you can also check the temperature when measuring the wind speed.

IP54 dustproof and drip-proof performance

It is dust-proof and drip-proof IP54, so you can use it outdoors with confidence.

Equipped with a backlit display

It is equipped with a display that allows you to check the measured values immediately, and has a backlight function that makes it easy to see the display even in dark places.

With tripod fixing hole

It has a tripod fixing hole (1/4 inch screw) and can be used by fixing it to a tripod.

Power supply is AAA dry cell x 3

This product runs on 3 AAA batteries. Since it is battery-powered, it is ideal for outdoor installation where it is difficult to secure a power source.

Equipped with a battery level display function

It is equipped with a battery level display function. Since the remaining battery level is displayed as an icon, it is easy to understand the guideline for battery replacement. You can also set the auto power off function, which automatically turns off the power if you do not use it for about 15 minutes.

With a storage case that is convenient to carry

Comes with a storage case that can be passed through the belt. Since the product itself is small, it has excellent portability.

Features of CHE-WD2

A cup-type anemometer that can perform stable measurements even if the wind direction suddenly changes.

When measuring the wind speed, you can also check the temperature.

It can be used for wind measurement in a wide range of fields such as outdoor events, sports competitions, golf, windsurfing, work sites, agriculture, and fishing.

Obtained dust-proof and drip-proof IP54, it can be used outdoors with peace of mind.

It has a backlight function that makes it easy to see the display even in the dark.

With a tripod fixing hole (1/4 inch screw), it can be used with a tripod.

It has an auto power off function that automatically turns off the power if it is not used for about 15 minutes. The auto power off function can also be canceled.

When the battery is low, the battery level icon will be displayed to inform you that the battery has been replaced.

Specifications

Range of measurement	Wind speed / 0.7-30.0m / s Temperature / -20 ℃ -60 ℃
Measurement accuracy	Wind speed / ± (3% + 0.3m / s) Temperature / ± 1.5 ℃
Resolution	Wind speed / 0.1m / s temperature / 0.1 ℃
Switchable measurement unit	m / s, km / h
Dust-proof and drip-proof	IP54
Operating conditions	-20 ℃ ～ 60 ℃, 10% RH ～ 90% RH
Preservation conditions	-20 ℃ ～ 60 ℃, 10% RH ～ 75% RH
Battery life	About 60 hours
Power supply	3 AAA batteries
Size	W58 × D48 × H150.5mm
Weight	About 123g
Function	Backlit color LCD display, wind speed and temperature measurement, maximum / minimum value recording, unit (m / s, km / h) switching, battery level display function, automatic power off function (about 15 minutes, can be canceled) )
Set	Anemometer, AAA batteries (for testing) x 3, storage case, instruction manual / warranty card

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-WD2 Cup Type Anemometer first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-WD1 Digital Anemometer (Vane Type)

kvt part2 — Tue, 23 Jun 2020 11:07:34 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-WD1

Features of CHE-WD1

It is a digital display wind measuring instrument that can be easily operated.

It can be used for wind measurement in a wide range of fields such as outdoor events, sports competitions, golf, windsurfing, work sites, agriculture, and fishing.

It can also be used to measure wind speed before drone flight.

It has a backlight function that makes it easy to see the display even in the dark.

When measuring the wind speed, you can also check the temperature.

The wind speed unit (m / s, km / h) can be switched.

Data recording with maximum and minimum wind speeds is possible.

With an auto power off function, it automatically turns off the power when not in use for a long time, so you will never forget to turn off the power.

When the battery is low, the battery level icon will be displayed to inform you that the battery has been replaced.

Specifications

Range of measurement	Wind speed /0.4 to 30.0 meters per second temperature / -20 to 60 ° C
Measurement accuracy	Wind speed / ± (3% + 0.3 m / s) Temperature / ± 1.5 ° C
Resolution	Wind speed / 0.1 meters per second temperature / 0.1
Selectable measurement unit	m / s, km / h
Operating conditions	Temperature / -20-60 ℃ Humidity / 10-90%
Preservation conditions	Temperature / -20-60 ℃ Humidity 10-75%
Power supply	3 AAA batteries
Battery life	60 hours
Size	W56 × D30.5 × H178.5mm
Weight	84g (without batteries)
Function	High-precision and high-speed response, backlit color LCD display, wind speed and temperature measurement, maximum / minimum value recording, unit (m / s, km / h) switching, overrange display, battery level display function, automatic Power off function

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-WD1 Digital Anemometer (Vane Type) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-BT2 Multi-digital Battery Level Checker

kvt part2 — Tue, 23 Jun 2020 11:07:33 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-BT2

Features of CHE-BT2

Check the remaining battery level of single / AA / AA / AAA / AAA dry batteries (rated voltage 1.5V), 3V, 6V, 9V, 12V dry batteries, 1.2V rechargeable batteries, 1.5V button batteries, and coin batteries. I can do it.
Air batteries and lithium batteries cannot be checked.

Equipped with an energy-saving auto power off function. (The power turns off automatically 1 minute after turning on the power.)
If the power turns off, press the “MODE / START” button for 2 seconds.
The power is automatically turned off even during measurement.

With load voltage measurement function.

You can easily measure by simply sandwiching the dry battery.

Specifications

Size	About W48 x D22 x H128 mm
Weight	About 65g
Battery used	Button battery (LR44) x 2 (for testing) * The attached button battery uses G13A, but it is a button battery compatible with LR44. There is no problem in using it.
Measurable battery	Single type, AA type, AA type, AAA type, AAA type (rated voltage 1.5V), 3V, 6V, 9V, 12V dry battery, 1.2V rechargeable battery, 1.5V button battery, coin battery

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-BT2 Multi-digital Battery Level Checker first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-LT1 Digital Illuminance Meter

kvt part2 — Tue, 23 Jun 2020 11:07:32 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-LT1

Features of CHE-LT1

It is an illuminance measuring instrument with a digital display that can be easily operated.

It can be used in many places such as residences, offices, schools, libraries, museums and factories.

Measurement is possible in a wide range from 0 to 200K Lux.

It has a backlight function that makes it easy to see the display even in the dark.

A sensor cap is attached to prevent damage to the sensor when not in use.

When measuring the illuminance, you can also check the temperature.

Maximum / minimum (MAX / MIN) data recording is possible.

With an auto power off function, it automatically turns off the power when not in use for a long time, so you will never forget to turn off the power.

When the battery is low, the battery level icon will be displayed to inform you that the battery has been replaced.

Specifications

Range of measurement	Illuminance / 0lx ～ 200KLux Temperature / -20 ℃ ～ 60 ℃
Measurement accuracy	Illuminance / ± 3% rdg ± 8d (less than 10000Lux), ± 4% rdg ± 10d (10000Lux or more) Temperature / ± 1.5 ℃
Resolution	Illuminance / 0.1 (less than 1000Lux), 1.0 (1000Lux or more) Temperature / 0.1
Sampling rate	0.5s
Operating conditions	Temperature / -20-60 ℃ Humidity / 10-90%
Preservation conditions	Temperature / -20-60 ℃ Humidity / 10-75%
Power supply	3 AAA batteries
Battery life	60 hours
Material	ABS resin
Size	W56 × D30.5 × H174.5mm
Weight	84g (without batteries)
Function	High-precision, high-speed response, backlit color LCD display, temperature measurement function, automatic power-off function, automatic correction of non-standard lighting parameters, measurement unit (Lux), maximum / minimum value (MAX / MIN) Backlit LCD display for recording, easy operation in dark places, automatic measurement, battery level display function

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-LT1 Digital Illuminance Meter first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply LAN-TST6 LAN Cable Tester

kvt part2 — Tue, 23 Jun 2020 11:07:29 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: LAN-TST6

Features of LAN-TST6

You can easily check the connection status of UTP / STP cables with RJ-45 connectors (EIA / TIA-568A / 568B) and modular cables with RJ-11 connectors.

You can check for cable continuity, disconnection, wiring mistakes, and the presence of ground.

The display speed of the continuity inspection can be switched in 3 steps, making it easier to check the continuity.

The slave unit (remote unit) is removable and you can easily check the installed cables.

With LED light, it is convenient for working in dark places.

Since it has a USB (microUSB) port, you can use the LAN cable tester and LED light even without a 9V dry battery by connecting an AC charger (DC5V) with a microUSB cable.
* Cable and charger are not included, so they are required separately.

Specifications

Measurable cable	Twisted pair cable (UTP / STP) / 〇 Telephone cable / 〇 10BASE2 / ×
Measurable connector	RJ-45 (UTP / STP) RJ-11
Wiring	Straight / Cross discrimination / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Detailed wiring / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Wiring error / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Pair crack detection / ×
Disconnection	Presence / absence / 〇 Identification of broken core wire / 〇 Corresponding cable length / 305m
PoE measurement	×
Cable length measurement / display	×
Tone generator function	× * An optional probe ( LAN-T256712 ) is required to detect the tone of the tone generator .
Other features	With USB light
Remote unit	〇
Display method	LED
Battery used	9V dry cell x 1
Size	Master unit / W70 × D26 × H104mm Remote unit / W35 × D26 × H104mm
Weight	Master unit / approx. 68g (without batteries) Remote unit / approx. 42g
Accessories	006P 9V dry cell x 1 (for test), instruction manual

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply LAN-TST6 LAN Cable Tester first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply LAN-TST3Z LAN Cable Tester

kvt part2 — Tue, 23 Jun 2020 11:07:28 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: LAN-TST3Z

Features of LAN-TST3Z

You can easily check the connection status of UTP / STP cables with RJ-45 connectors (EIA / TIA-568A / 568B) and modular cables with RJ-11 connectors.

You can check for cable continuity, disconnection, wiring mistakes, and ground presence.

The slave unit (remote unit) is removable and you can easily check the installed cables.

Comes with a storage case that is convenient to carry.

Specifications

Measurable cable	Twisted pair cable (UTP / STP) / 〇 Telephone cable / 〇 10BASE2 / ×
Measurable connector	RJ-45 (UTP / STP) RJ-11
Wiring	Straight / Cross discrimination / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Detailed wiring / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Wiring error / 〇 * The connection status is determined while checking the lighting status of the LEDs 1 to 8. Pair crack detection / ×
Disconnection	Presence/absence / 〇 Identification of broken core wire / 〇 Corresponding cable length / 300m
PoE measurement	×
Cable length measurement/display	×
Tone generator function	× * An optional probe ( LAN-T256712) is required to detect the tone generator’s tone.
Other features	×
Remote unit	〇
Display method	LED
Battery used	9V dry cell x 1
Size	Master unit / W66 × D29.5 × H105.5mm Remote unit / W37 × D28 × H105.5mm
Weight	Master unit / approx. 70g (without batteries) Remote unit / approx. 48g
Accessories	006P 9V dry cell x 1 (for test), storage case, instruction manual

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply LAN-TST3Z LAN Cable Tester first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply TAP-TST8N Voltage Detector

kvt part2 — Tue, 23 Jun 2020 11:07:28 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model:TAP-TST8N

You can measure power consumption and charges just by plugging it into an outlet.

It is a watt monitor that automatically starts measurement when plugged into an outlet. Measurements are always taken during operation and the measured values are displayed on the LCD panel.

Easy to use 3 steps

Plug the power plug of the object you want to measure into the watt monitor, and plug the watt monitor into the wall outlet.
Measurement can be performed automatically when the power of the connected device is turned on.

For power measurement and power saving measures for telework

The National Taxation Agency has announced a policy to exempt electricity charges related to telework (working from home) based on the floor area of the room used for business and the number of days at home (announced on January 15, 2021). .. If you use a watt monitor, you can measure the amount of electricity and electricity charges of the equipment used for telework, which is convenient when applying to the company! You can also check your electricity bill and use it as a power saving measure.

Display 5 types of measurement data

Five types of measurement data are displayed: power consumption (W), integrated electric energy (kWh), integrated time (Hour), integrated power charge (yen), and CO2 emission (kg).

LCD panel that shows measured values immediately

Since the measured value is displayed on the LCD screen, you can check the data at a glance.

Features of TAP-TST8N

It is a voltage detector that can measure 5 types.

Five types of power consumption (W), integrated electric energy (kWh), integrated time (Hour), integrated power charge (yen), and CO2 emission (kg) can be measured.

You can measure immediately by plugging it into an outlet and pressing a button.

It is displayed numerically on the LCD screen, and you can check the data at a glance.

Specifications

Measurement range and accuracy
Rated capacity	15A / 100V (up to 1500W)
Rated voltage	100V
Product power consumption	Up to 0.3W
Plug specifications	2P
Size	W60 x D40 (including protrusions) D25 (not including protrusions) x H59 mm
Weight	About 72g
Material	PC6485 (polycarbonate)
Area of use	Only in Japan. It cannot be used outside Japan.
Certification	Electrical Appliance and Material Safety Law (PSE) technical standard compliant product
Power consumption	Measurement range / 0 ・ 0.3 ～ 1650Watt, measurement accuracy / maximum 2% ± 5W
Integrated electric energy	Measurement range / 0.00 to 9999kWh, measurement accuracy / maximum 2% ± 5W
Integration time	Measurement range / 00: 00-9999Hour, measurement accuracy / 30ppm
Accumulated charge	Measurement range / 0.00 to 9999 yen, measurement accuracy / maximum 2% ± 5
Measurement cycle	1 second

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply TAP-TST8N Voltage Detector first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TG220 Thermography (Infrared, Approx. 300,000 pixels, USB Rechargeable)

kvt part2 — Tue, 23 Jun 2020 11:07:26 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TG220

Features of CHE-TG220

The surface temperature of the object to be measured can be measured non-contactly, and minute temperature differences can be visualized for verification and diagnosis.

A wide range of temperature measurements from -20 ° C to 300 ° C is possible without touching the object.

High resolution type with infrared resolution 220 x 160 (300,000) pixels.

High-definition display is possible on the TFT 3.2 inch display.

The emissivity of the object to be measured can be adjusted between 0.1 and 1.0.

The image data recorded in the 3GB built-in memory can be saved and transferred to a personal computer with a USB cable.

It can be used for a long time with a continuous operation time of 2 hours.

It is an economical USB charging type power supply.

There is also an auto power off setting to prevent forgetting to turn off the power.

It is compact and lightweight, and has excellent portability.

Specifications

* Thermography is not a thermometer specified by the Pharmaceutical Machinery Law. In the Pharmaceutical Machinery Law, a “thermometer” is designated as a medical device, and general thermography cannot be used as a thermometer.
Measurement temperature range	-20-300 ℃
Measurement temperature accuracy	± 2 ° C or ± 2%
Wavelength range	8-14 μm
Emissivity	0.1-1.0 (adjustable)
Infrared camera resolution	220 x 160 pixels
Number of pixels	Approximately 300,000 pixels
Angle of view	Approximately 27 ° x 35 °
Shortest focal length	15cm
Thermal sensitivity	0.07 ℃
Save image	3GB internal memory
File format	JPG
Interface	micro USB 2.0
Operating temperature	0-45 ℃
Storage temperature	-20 to 60 ° C
Auto power off	Selectable 5 minutes / 10 minutes / no auto power off
Power supply	Lithium-ion battery (built-in)
Continuous operation time	Up to 2 hours
Size	W85 x D90 x H220 mm
Weight	About 413g
Set	Main unit x 1, storage case x 1, AC adapter x 1, USB cable x 1, belt x 1, instruction manual / warranty x 1

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TG220 Thermography (Infrared, Approx. 300,000 pixels, USB Rechargeable) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-SD1 Digital Sound Level Meter

kvt part2 — Tue, 23 Jun 2020 11:07:25 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-SD1

Features of CHE-SD1

It is a noise-measuring instrument with a digital display that can be easily operated.

It can be used indoors such as offices, libraries, and gymnasiums to outdoors such as roads and grounds.

It has a hold function that can display the measured value in a fixed manner.

It has a backlight function that makes it easy to see the display even in the dark.

Comes with a microphone cover to prevent wind noise.

When you measure the noise, you can also check the temperature.

Data recording with maximum and minimum volume is possible.

With an auto power-off function, it automatically turns off the power when not in use for a long time, so you will never forget to turn off the power.

When the battery is low, the battery level icon will be displayed to inform you that the battery has been replaced

Specifications

Applicable standards	IEC61672-1 CLASS 2 compliant
Range of measurement	Noise / 35dB ~ 135dB Frequency / 31.5Hz ~ 8kHz Temperature / -20 ℃ ~ 60 ℃
Measurement accuracy	Noise / ± 2.0dB Temperature / ± 1.5 ℃
Resolution	Temperature / 0.1
Dynamic range	50dB
Dynamic characteristics (frequency weighting time)	FAST (time constant 125 ms), SLOW (time constant 1 second)
Microphone	1/2 inch electret condenser microphone (High / Low reading display)
Data update	0.3s
Operating conditions	Temperature / -20-60 ℃ Humidity / 10-90%
Preservation conditions	Temperature / -20-60 ℃ Humidity / 10% -75%
Battery life	60 hours
Power supply	3 AAA batteries
Material	ABS resin
Size	W56 × D30.5 × H144mm
Weight	73g (without batteries)
Function	High accuracy, high-speed response, backlit color LCD display, temperature measurement, maximum/minimum data recording, wide measurement frequency range, frequency correction by dynamic characteristics (time weight characteristic Fast / Slow), over range display, automatic power-off function

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-SD1 Digital Sound Level Meter first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TN430 Non-contact Radiation Thermometer

kvt part2 — Tue, 23 Jun 2020 11:07:22 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TN430

Features of CHE-TN430

A gun-type non-contact radiation thermometer that can measure a wide range of temperatures from -38 to 365 ° C without touching the object.

Using laser light to indicate the object for measurement makes the measurement point clear

It corresponds to a class 2 laser product and has a PSC certification mark, so you can use it with confidence.

You can set the emissivity in two steps (0.95 / 0.70) based on the material and surface condition of the object you are measuring.

It has a backlight function that makes it easy to see the display even in the dark.

It has a continuous measurement mode function that can continuously measure the temperature for up to 60 minutes.

With an auto power off function, the power will be turned off automatically if you do not use it for a long time, so you will not forget to turn off the power.

Comes with a convenient battery level display function.

Specifications

Range of measurement	-38-365 ℃
Accuracy	Target temperature -38 to 0 ° C / ± [2.5 ° C + (0-display temperature) x 0.05 ° C] Target temperature 0 to 365 ° C / ± 2.5% or 2.5 ° C larger Target temperature 15 to 35 ° C, temperature range 25 ° C At / ± 1.5 ℃
Resolution	0.2 ° C (-9.9 to 199 ° C), otherwise 0.1 ° C
Emissivity	0.95 / 0.70 (default setting is 0.95)
Measurement distance and measurement range	12: 1 (measures a range of 10 cm in diameter for a distance of 120 cm)
Operating temperature	10-50 ℃
Continuous use time	Approximately 14 hours (when using alkaline batteries)
Power supply	2 AAA batteries
Size	W153 × D114.3 × H47.6mm
Weight	177g (including batteries)
Material	ABS resin

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TN430 Non-contact Radiation Thermometer first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TG32 Thermography (Infrared, 1024 Pixels, Dry Cell Type)

kvt part2 — Tue, 23 Jun 2020 11:07:22 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TG32

Features of CHE-TG32

You can measure the surface temperature of the object non-contactly and visualize minute temperature differences for verification and diagnosis.

Building structure/ outer wall peeling diagnosis, heat insulation/insulation diagnosis/ factory equipment/ electrical equipment diagnosis, piping diagnosis/ equipment/motor/engine heat generation diagnosis, parts diagnosis

A wide range of temperature measurements from -20 ° C to 300 ° C is possible without touching the object.

Infrared resolution 32 x 32 (1,024) pixel resolution type.

The 2.4-inch display can show the measurement result.

You can adjust the emissivity of the object being measured between 0.1 and 1.0.

You can save image data in microSD memory.

It can be used for a long time with a continuous operation time of 6 hours.

It is a convenient AA battery-type power supply system.

There is an auto power-off function to prevent forgetting to turn off the power.

You can fix it to a tripod for measurement, as it features a mounting hole for a tripod.

It is compact and lightweight and has excellent portability.

Specifications

* Thermography is not a thermometer specified by the Pharmaceutical Machinery Law. In the Pharmaceutical Machinery Law, a “thermometer” is designated as a medical device, and general thermography cannot be used as a thermometer.
Measurement temperature range	-20 ℃ ～ 300 ℃
Measurement temperature accuracy	± 2 ° C or ± 2%
Wavelength range	8 to 11.5 μm
Emissivity	0.1-1.0 (adjustable)
Infrared camera resolution	32 x 32 pixels
Number of pixels	1,024 pixels
Angle of view	Approximately 33 ° x 33 °
Shortest focal length	50cm
Thermal sensitivity	0.3 ℃
Save image	microSD card up to 8GB
File format	bmp
Power supply	4 AA batteries
Auto power off	Power off in 12 minutes
Tripod mounting hole	1 / 4-20UNC
Size	W62 × D95 × H212mm
Weight	About 320g
Operating temperature range	-5 ℃ ～ 40 ℃
Storage temperature range	-20 ℃ ～ 50 ℃
Storage humidity range	10% -80%
Set	Main unit x 1, storage case x 1, MicroSD card (8GB) x 1, strap x 1, AA batteries (for testing) x 4, instruction manual / warranty x 1

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TG32 Thermography (Infrared, 1024 Pixels, Dry Cell Type) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TP1 Digital Thermo-hygrometer

kvt part2 — Tue, 23 Jun 2020 11:07:21 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TP1

Features of CHE-TP1

This is a temperature and humidity measuring instrument with a digital display that is easy to operate. This instrument can measure the temperature and humidity in homes, offices, schools, greenhouses, and similar environments. This device includes a hold function to steadily display the measured values. This tool also features a backlight function, making the display easy to read even in dark conditi

Data recording with maximum and minimum humidity is possible.

Specifications

Range of measurement	Humidity / 0-100% Temperature / -20-60 ℃ Dew point temperature / -20-60 ℃ Wet-bulb temperature / -20-60 ℃
Measurement accuracy	Humidity / ± 3.0% (for 45-75 %), ± 4.5% (other cases) Temperature / ± 1.0 ° C Dew point temperature / ± 1.5 ° C Wet-bulb temperature / ± 1.5 ° C
Resolution	Humidity / 0.1 temperature / 0.1 dew point temperature / 0.1 wet bulb temperature / 0.1
Data update	0.5s
Operating conditions	Temperature / -20-60 ℃ Humidity / 10-90%
Preservation conditions	Temperature / -20-60 ℃ Humidity / 10-75%
Battery life	50 hours
Power supply	3 AAA batteries
Material	ABS resin
Size	W56 × D30.5 × H168mm
Weight	75g (without batteries)
Function	High-precision, high-speed response humidity / temperature sensor, backlit color LCD display, maximum / minimum data recording, fixed display (HOLD), dew point temperature, wet-bulb temperature, overrange display, automatic power off function
Set	1 digital thermo-hygrometer, 3 AAA batteries (for testing), 1 instruction manual / warranty (this document)

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TP1 Digital Thermo-hygrometer first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TPHU2WN Digital Thermo-hygrometer With Heat Stroke & Display (With Warning Buzzer Setting Function)

kvt part2 — Tue, 23 Jun 2020 11:07:20 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TPHU2WN

Features of CHE-TPHU2WN

It is a digital thermo-hygrometer that shows the temperature and humidity.

We will inform you of the danger of heat stroke and influenza from the indoor temperature and humidity conditions.

With a large, easy-to-read screen and digital memory, you can see at a glance the degree of danger in the room.

Regarding temperature and humidity, the display not only shows the current values but also today’s highest and lowest values, in addition to the previous day’s extremes

Comes with a large digital display clock.

It has an alarm function.

With a heat stroke meter, you will be notified of caution and alertness with a digital display of 5 levels based on the current temperature and humidity conditions.
* In case of danger, the 5-step display flashes.
* The display on the heat stroke meter is just a guide for air conditioning and physical condition management. How you feel may differ greatly depending on individual differences and physical condition.
* The display does not determine whether or not it has occurred.
* It may not match the “Caution” and “Warning” announced by public institutions.

You can configure a warning buzzer, which, when activated, emits a sound alert once the WBGT value reaches the predetermined level.

The seasonal influenza indicator alerts you with a 3-level digital display based on current temperature and humidity conditions.

The display’s seasonal influenza indicator uses absolute humidity to estimate virus spread likelihood, aiding in infection prevention guidance

* We do not support outbreaks of new influenza with unpredictable indexes.

You can use this environmentally friendly product in schools, hospitals, general offices, factories, and homes.

You can use it in various places thanks to its magnet for attaching to flat magnetic metal surfaces like lockers or refrigerators, a hook hole for wall hanging, and a stand for upright positioning

Specifications

Color	white
Measurement range and display range	Temperature -9.9-50.0 ℃ Humidity 20-90% rh
Measurement accuracy	Temperature within ± 1 ° C (10-40 ° C) ± 1.5 ° C (other than the left) Humidity ± 5% rh (40-70% rh / temperature 20-30 ° C) ± 8% rh (other than the left)
Resolution	Temperature 0.1 ℃ Humidity 1% rh
Use / storage temperature / humidity environment	Temperature -9.9-50.0 ℃ Humidity 90% rh (No freezing or condensation)
Automatic measurement Sampling cycle	Every 20 seconds
Clock accuracy	Average monthly difference within ± 30 seconds (at room temperature)
Display function	(1) Temperature (Lo display for -9.9 ° C or less) (HI display for 50.0 ° C or higher) (2) Humidity (Lo display for 20% or less) (HI display for 90% or more) (3) Today Maximum temperature / maximum humidity / minimum temperature / minimum humidity (4) Maximum temperature / maximum humidity / minimum temperature / minimum humidity of the previous day (5) Clock (hour / minute display 12 / 24H switchable) (6) Alarm / warning buzzer setting (6) ( With bell mark) (7) Heat stroke meter (5-step display almost safe / caution / caution / strict caution / danger) / WBGT value (℃) (8) Seasonal influenza indicator (3-step display almost safe / caution / warning) ) ・ Absolute humidity (g) (9) Battery replacement display (with low battery mark)
Alarm sound	Electronic sound 85 dB or more (10 cm in front)
Power supply	2 AAA batteries
Battery life	Approximately 1 year * Sanwa Supply test value, not guaranteed value.
Material	ABS resin / acrylic resin (main body)
Size	W100 × D17 × H120mm
Weight	Approximately 143g (including batteries)
Accessories	2 AAA batteries (for operation check)

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TPHU2WN Digital Thermo-hygrometer With Heat Stroke & Display (With Warning Buzzer Setting Function) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TPHU7 Wireless Thermo-hygrometer (1 Receiver + 1 Transmitter)

kvt part2 — Tue, 23 Jun 2020 11:07:17 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-TPHU7

Features of CHE-TPHU7

It is a wireless thermo-hygrometer that can measure the temperature and humidity data of up to 3 transmitters according to the cycle and display it on the screen.

You can check the weather and date and time (with an alarm function) based on the barometric pressure.

Since it is a wireless setting, the temperature and humidity at a remote location can be displayed in real-time.

There is also a liquid crystal display on the transmitter side, so you can check the measured values of temperature and humidity on the spot.

The temperature/humidity sensor uses a high-performance sensor to reproduce a highly accurate temperature and humidity display.

Specifications

Receiving machine
Display items	Weather due to temperature, humidity, time, date and time, and barometric pressure
Display range	Temperature (-40 ° C to 60 ° C), Humidity (10% to 99%)
Room temperature	-9.9 ° C to 60 ° C (accuracy / ± 1 ° C)
Indoor humidity	10% -99% (accuracy / ± 5%)
Outdoor temperature	-40 ° C to 60 ° C (accuracy / ± 5 ° C)
Outdoor humidity	10% -99% (accuracy / ± 5%)
Barometric pressure measurement range	300hpa ~ 1100hpa ± 3hpa
function	Timer function, date/time / time setting
Automatic measurement cycle	About 60 seconds
Highest and lowest display function	temperature humidity
battery	Sold separately (AA alkaline batteries x 3)
size	W86 × D22 × H162mm
accessories	AC adapter x 1 (for receiver)
Transmitter
Display items	temperature humidity
Outdoor temperature	-40 ° C to 60 ° C (accuracy / ± 1 ° C)
Outdoor humidity	10% -99% (accuracy / ± 5%)
Automatic measurement cycle	Channel (1) -61 seconds, Channel (2) -62 seconds, Channel (3) -63 seconds
accessories	2 AA alkaline batteries (for testing)
size	W40 × D18 × H122mm
Common specifications
frequency	920.9MHz
Operating temperature/humidity sensor	Swiss made Sensirion
Transmission range	Approximately 80m * When there are no obstacles.

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TPHU7 Wireless Thermo-hygrometer (1 Receiver + 1 Transmitter) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-TPHU7TX Wireless Thermo-hygrometer (Transmitter Only)

kvt part2 — Tue, 23 Jun 2020 11:07:16 +0000

Product Made in Japan

Manufacturer: Sanwa Supply
Model: CHE-TPHU7TX

Features of CHE-TPHU7TX

It is a transmitter for CHE-TPHU7 .

It is a transmitter of a wireless thermo-hygrometer that can measure temperature and humidity data according to the cycle and display it on the screen.

This product also has a liquid crystal display function that can display temperature and humidity in real time.

The temperature / humidity sensor uses a high-performance sensor to reproduce highly accurate temperature and humidity display.

You can connect to the receiver in the channel settings, and in the case of CHE-TPHU7 , you can connect up to 3 units.

Specifications

Display items	temperature humidity
Outdoor temperature	-40 ° C to 60 ° C (accuracy / ± 1 ° C)
Outdoor humidity	10% -99% (accuracy / ± 5%)
Automatic measurement cycle	Channel (1) -61 seconds, Channel (2) -62 seconds, Channel (3) -63 seconds
Accessories	2 AA alkaline batteries (for testing)
Size	W40 × D18 × H122mm
Weight	85g
Material	ABS

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-TPHU7TX Wireless Thermo-hygrometer (Transmitter Only) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply PSC-TMCMS1 Body Surface Temperature Measurement Device

kvt part2 — Tue, 23 Jun 2020 11:07:14 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: PSC-TMCMS1

For infectious disease prevention measures!
Just show your face and measure the temperature immediately

Body surface temperature measurement camera

By simply placing a body surface temperature measurement camera, you can efficiently detect individuals with potential fevers in offices, hospitals, restaurants, reception desks, and similar settings.

As it is a non-contact camera that automatically detects and measures temperature just by showing the face, thereby reducing the risk of infection, you can use it with confidence.

No need to connect to the network! Just put it and you can use it immediately

You can use it immediately by simply placing it on a counter or table and turning on the power, without needing any complicated settings like network connections.

You can efficiently measure your face in just 0.35 seconds, and additionally, the screen angle can be adjusted for easier measurement.

Non-contact type that can measure temperature with confidence

Since it is a non-contact type that automatically detects and measures temperature just by showing the face, the risk of infection is low, making it both safe and hygienic.

It is no longer necessary to secure personnel for temperature measurement, and temperature measurement work can be greatly reduced.

Temperature measurement is OK even with the mask on

Since there is no need to remove the mask, the temperature can be measured quickly.

Notice of fever and non-wearing of mask

If you do not have a fever or mask, you can issue a warning message.

You can introduce and utilize it in various places

You can use it in various places like workplaces, hospitals, restaurants, reception desks, and homes

You can save your face photo and copy it to a USB memory

You can save the image and insert the USB memory into the USB port of the main unit to extract the data.

Can also be mounted on the wall

You can also remove the stand and secure it to the wall.

* This product is for indoor use only.
* This product measures the temperature of the body surface, not the thermometer that measures the temperature of the human body based on the Pharmaceutical Affairs Law (formerly the Pharmaceutical Affairs Law).

Features of PSC-TMCMS1

This product is easy to set up, without requiring complicated network connections; you can start using it immediately after installation and powering it on. This product allows for quick display of body surface temperature by simply standing in front of it. This product also has the capability to issue a warning message if a mask is not worn.

It is also possible to take a photo of your face and save it.

The saved image can be extracted by inserting a USB memory into the USB port of the main unit.

* This product is not a product that accurately measures body temperature.

* Made for the purpose of measuring the surface temperature. To set the correct temperature, use a commercially available contact thermometer.

Please be aware that if the device is installed near an outside location prone to cold air intrusion, the surrounding temperature may fluctuate, affecting accuracy. Please remain indoors for about 20 minutes before taking body surface temperature measurements, particularly after coming in from outside. Please position the camera in a location shielded from direct sunlight and strong light for optimal performance

Specifications

Temperature measurement specifications
Screen size	7 inch LCD display
Screen type	Capacitive touch screen
Resolution	600 x 1024
Camera	1 / 2.8 inch 2MP (2 million pixels) CMOS high resolution WDR dual camera
WDR (Dynamic Range)	120dB
Light correction	Automatic white light, automatic IR light
Status indicator lamp	1 (red / error, green / normal, blue / operating)
Voice prompt	Correspondence
Housing material	Aluminum alloy / tempered glass / polycarbonate
Power supply	DC12V 2A
Power consumption	Up to 24W
Size	W312.5 × D129 × H36.7mm
Weight	2.2kg
Operating temperature	15-30 ℃
Storage temperature	-10 to 55 ° C
Main unit memory	2.5GB
IR resolution	120 x 90
Measurement viewing angle	50 °
Measurement temperature range	30-45 ℃
Measurement time	About 0.35 seconds
Measurement accuracy	0.1 ℃
Measurement error	± 0.5 ℃
Temperature measurement distance	0.3-1.5m
Built-in memory capacity
Number of registered users	50000
Number of saved face images	10000
interface
USB	USB 2.0 port

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply PSC-TMCMS1 Body Surface Temperature Measurement Device first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply PSC-TMCMS2 Thermography Camera (Non-contact Temperature Measurement)

kvt part2 — Tue, 23 Jun 2020 11:07:05 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: PSC-TMCMS2

A thermography camera that supports non-contact temperature measurement.
Equipped with a liquid crystal display with a resolution of 160 x 120px, you can check the body surface temperature measured in real time.

Equipped with a high-precision heat sensor, the thermography accuracy is ± 0.5 ° C. Instantly detects abnormal body surface temperature such as fever.

It supports snapshot shooting and can save the measured temperature. The data is saved on the microSD card and supports saving up to 128GB.
* MicroSD card is sold separately.

The included USB cable is included and can be used not only for charging but also for transferring data to a PC.

It is a rechargeable product with a built-in lithium-ion battery. Since it can be used repeatedly by charging, the battery cost is not bulky and it is economical.

Features of PSC-TMCMS2

The temperature can be detected in real time and displayed on the display.

Non-contact temperature measurement is possible.

You can take a snapshot. (Save to microSD card)

It has a built-in lithium-ion battery.

Supports continuous operation for up to 8 hours.
* This product measures the body surface temperature, not the body temperature.
In addition, it is not a thermometer based on the Pharmaceutical Affairs Law (formerly the Pharmaceutical Affairs Law).

Specifications

Measurement temperature range	30-45 ℃
Measurement error	± 0.5 ℃
Operating environment temperature	10-35 ℃
Measured distance	About 1.5m
LCD size	320 x 240 mm
LCD resolution	160 x 120 pixels
Usage time	About 8 hours
Battery	Lithium-ion built-in battery
Compatible media	MicroSD card up to 128GB
Size	W59 × D78 × H196mm
Set	Main unit, USB cable for charging, AC adapter, strap, instruction manual

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply PSC-TMCMS2 Thermography Camera (Non-contact Temperature Measurement) first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CR-TMSTN1 Stand For PSC-TMCMS1 Model

kvt part2 — Tue, 23 Jun 2020 11:07:04 +0000

Manufacturer: Sanwa Supply
Model: CR-TMSTN1

Features of CR-TMSTN1

It is a dedicated stand that allows the body surface temperature measurement camera PSC-TMCMS1 to be installed on the floor.
Body surface temperature measurement You can adjust the screen angle of the camera (downward 7 °, upward 45 °).
Equipped with a disinfectant stand as standard equipment. The height can be changed to an easy-to-use position.
With a security wire mounting hole, the stand body and disinfectant can be prevented from being stolen.
Uses a flat pedestal that does not easily tip over and trip.

Specifications

Please check the assembly manual for the mounting method. There are no parts to prepare separately.
Color	Silver
Size	Diameter 300 x H1250 mm
Weight	4.6kg
Packing	1 mouth / 1300 x 345 x 345 mm · 6 kg
Shipping form	Assembly and shipping
Material	Body / Steel (Melamine baking finish)

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CR-TMSTN1 Stand For PSC-TMCMS1 Model first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-C2 Carbon Dioxide (CO2) Panel Monitor

kvt part2 — Tue, 23 Jun 2020 02:31:52 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-C2

Measures CO2 (carbon dioxide), temperature and humidity

A wall-mounted CO2 carbon dioxide monitor that detects CO2 (carbon dioxide) and displays a numerical value on the display.
Since temperature and humidity can also be measured, it is possible to grasp the indoor environment.

When the CO2 concentration status becomes high, the LED will notify you.

When the CO2 concentration becomes higher than a certain level, the LED on the main unit will notify you. Since the meter lights up based on the measured value of CO2 concentration, the change can be grasped immediately and the timing of ventilation can be known immediately.

When the CO2 concentration exceeds the set value, you will be notified by sound.

It is also possible to set an alarm to sound when the CO2 (carbon dioxide) concentration exceeds the set value. You can also set the alarm sound ON / OFF.

Recommended for offices, schools and medical facilities

Since the timing of ventilation can be known by sound and LED, it is recommended for places where regular ventilation is required. The large display makes it ideal for public and commercial facilities such as offices, conference rooms, schools, libraries and hospitals.

Power supply type by AC adapter

Power is supplied from the AC adapter, so there is no need to worry about running out of charge.

Can be installed on the wall

Since there is a hole for hanging on the wall, it can be installed by hooking it on a hook attached to the wall. When fixing to concrete with an electric drill, attach the attached anchor and tapping screw.

Features of CHE-C2

A wall-mounted CO2 carbon dioxide monitor that measures and displays CO2 (carbon dioxide), temperature, and humidity.

You can watch the indoor air environment such as offices / meeting rooms of companies, public facilities such as schools, libraries and hospitals, and commercial facilities.

When the concentration of CO2 (carbon dioxide) becomes high, it will notify you with an alarm sound and LED.

You can set the alarm to sound when the CO2 carbon dioxide concentration exceeds the set value. You can also set the alarm sound ON / OFF.

AC power supply type.

Specifications

Measurement items and measurement range	CO2 / 0-9999ppm, temperature / 0-50 ℃, humidity / 0-85% RH
Resolution	CO2 / 1ppm, temperature / 0.1 ℃, humidity / 0.1% RH
Accuracy	CO2 / ± 70ppm + 3% rdg (400-5000ppm), temperature / ± 0.8 ℃ (10-50 ℃) maximum ± 1.5 ℃, humidity / ± 3% RH (30-75% RH)
LED display (CO2)	3LED (0 to 599ppm) / Safe 6LED (600 to 1199ppm) / Be careful 9LED (1200 to 9999PPM) / Let’s ventilate
Alarm sound	Alarm sounds CO2 (carbon dioxide) concentration value can be set, alarm can be turned ON / OFF
CO2 sensor type	Non-dispersive infrared (NDIR) gas sensor
Usage environment	0 to 50 ° C, 85% RH or less (no condensation)
Storage environment	0-60 ℃, 85% RH or less (without condensation)
Installation height standard	2-2.5m
Measurement guideline range	50 square meters
Power supply	Power supply by AC adapter
Size	W392 x D292 x H42 mm
Weight	Approximately 1.42 kg (panel monitor body only)
Set	CO2 panel monitor, AC adapter, tapping screws x 4, anchors x 4, instruction manual / warranty
Correction function (calibration function)	If the correction function is used continuously for 5 to 7 days with the power turned on, accurate automatic correction (calibration) will be executed. * Although it depends on the product, it is a function that considers the minimum measured value of carbon dioxide for 5 to 7 days as 400PPM and corrects it step by step. * The reason why 400PPM is the standard is that the World Meteorological Organization (WMO) has announced that the average weekly CO2 concentration in the world is 400PPM, so 400PPM is the standard value.

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-C2 Carbon Dioxide (CO2) Panel Monitor first appeared on Kouei Japan Trading | Get Quotation.

Sanwa Supply CHE-C1 Carbon Dioxide (CO2) Measuring Instrument (With Temperature / Humidity Meter)

kvt part2 — Tue, 23 Jun 2020 02:31:38 +0000

Product Made in Japan
Manufacturer: Sanwa Supply
Model: CHE-C1

Notify the timing of ventilation with sound and light

CO2 carbon dioxide measuring instrument (with temperature/humidity meter)

It is a CO2 carbon dioxide measuring instrument that measures and displays CO2 (carbon dioxide), temperature, and humidity.
You can watch the air environment such as the living room/children’s room in the home, office/meeting room of the company, and public facilities such as the library, hotel room, farm greenhouse, and car.
When the concentration of CO2 (carbon dioxide) becomes high, you will be notified by sound and light, so you can know the timing of ventilation immediately.

Measures CO2 (carbon dioxide), temperature and humidity

It is a measuring instrument that detects CO2 (carbon dioxide) and displays a numerical value on the display. Since temperature and humidity can also be measured, it is possible to grasp the indoor environment.

Measures CO2 (carbon dioxide), temperature and humidity

When the CO2 concentration status becomes high, you will be notified by sound and light.

When the CO2 concentration becomes higher than a certain level, you will be notified by the LED of the main unit and an alert. Since you will be notified by sound and light, you can immediately grasp the change in CO2 concentration.

Light and sound change depending on the value of carbon dioxide concentration

The standard for indoor carbon dioxide concentration is 1000ppm or less, which is recommended by the Ministry of Health, Labor and Welfare.
This product changes the LED color and alarm sound in the range of 400 to 1000ppm, 1000ppm to 2000ppm, and 2000ppm.

Recommended for schools, stores and medical facilities

It notifies you of the timing of ventilation with sound and light, so it is recommended for places that require regular ventilation, such as schools and medical facilities.

Show battery level icon

The battery level icon is displayed so that you can check the charging timing. Charging is easy with the included Type-C-USB A cable.
AC adapter is sold separately.

Can be temporarily fixed to the wall

This product is a desktop installation type, but it can also be temporarily fixed to the wall using screws or the like.

Features of CHE-C1

It is a CO2 carbon dioxide measuring instrument that measures and displays CO2 (carbon dioxide), temperature, and humidity.

We monitor the air environment such as living rooms/children’s rooms in the home, offices/conference rooms in the office, and public facilities such as libraries, hotel rooms, farm greenhouses, and cars.

When the concentration of CO2 (carbon dioxide) becomes high, it will notify you by sound and light.

It can also run on the built-in battery.

Since the battery level icon is displayed, you can see the guideline for charging.

Charging can be done easily with a USB charging cable.
The AC adapter is not included, so please prepare it separately.

The NDIR sensor method recommended by the Ministry of Health, Labor and Welfare is adopted

Specifications

Correction function Automatic calibration method 1. Turn on the power and leave it outdoors for 20 minutes. 2. Press and hold the “Up arrow ▲, Down arrow …” button on the back side at the same time for 3 seconds or longer, and check that the “Dididi …” sound is heard. 3. 3. Enter auto-calibration mode and the monitor will continue to display for 150 seconds. At that time, please do not operate the product. Four. The countdown starts from the 150 display on the monitor and returns to the original display when completed.
Measurement range and measurement items	CO2 / 400-6000ppm, temperature / -20-50 ℃, humidity / 1-99% RH (no condensation)
Resolution	CO2 / 1ppm, temperature / 0.1 ℃, humidity / 1% RH
Accuracy	CO2 / ± 50ppm + 5% of reading (400-5000ppm), temperature / ± 1.5 ℃, humidity / 0% -80% RH ± 5% RH Others ± 10% RH
LED alarm (CO2)	Green (400-1000ppm), yellow (1000-2000ppm), red (2000ppm-)
Buzzer alarm (CO2)	None (400-1000ppm), once / every 2 seconds (1000-2000ppm), 2 times / every 1 second (2000ppm-)
CO2 sensor type	Non-dispersive infrared (NDIR) gas sensor
Data update	Within 1s
Power supply	3.7V Lithium Ion Battery (Built-in) 2000mAh
Charging port	USB Type-C (for DC5V 1A)
Usage time	8 hours (when using built-in battery), charging time 4 hours
Usage environment	-10 to 50 ° C, 85% RH or less (no condensation) * The temperature measurement display of the main unit is -20 to 50 ° C, but the usage environment including other parts is -10 to 50 ° C.
Storage environment	-20 to 60 ° C, 90% RH or less (no condensation)
Size	W91.8 × D36 × H97.8mm
Weight	About 198g
Set	Main unit, USB charging cable 1m (USB Type-C-USB A), instruction manual (warranty)

Other items of Sanwa Supply

Request the quotation for Sanwa Supply

The post Sanwa Supply CHE-C1 Carbon Dioxide (CO2) Measuring Instrument (With Temperature / Humidity Meter) first appeared on Kouei Japan Trading | Get Quotation.