Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/fsfsdfm.pdf

Features

The joint kit is extremely easy to handle, and replacement of the joint kit requires only 8 bolts to be installed or removed. Therefore, it is a very easy-to-maintain universal joint.
Compared to the drive shaft type, the shaft diameter can be larger while the outer diameter is more compact.

Main uses

Construction machinery, machine tools, molding machines, rolling mills, levelers, slitters, agricultural machinery, pumps and other industrial machinery.

Specifications and Dimension

• [Note] For FS, FSD, and FM, the grease nipple protrudes from the periphery of the cross section for the 85 and 100 models in common.
• *Keyway dimensions A and B vary depending on the hole diameter, so please inquire in each case.
• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/05/smshfshdsht_f.pdf

Features

We can process according to shaft diameter and length.
Key dimensions and shaft length dimensions can be produced according to customer specifications.

Specifications and Dimension

• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Features

The rubber cover is made of nitrile butadiene rubber (NBR), which has excellent oil and wear resistance. The cover has a bulge in the center to allow smooth rotation even at an angle of approximately 30° to 40°, and is easy to install and remove to prevent dust from entering. By spreading sufficient molybdenum disulfide grease or other lubricant over the central bulge, lubrication-free operation is possible.

Specifications and Dimension

Specifications (* indicates that it takes additional time to process.)                                                                 (Unit: mm)

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/fsfsdfm.pdf

Features

Extremely easy to handle, the joint kit can be replaced by simply installing and removing only 8 bolts, making this universal joint easy to maintain.

Main uses

Construction machinery, machine tools, molding machines, rolling mills, levelers, slitters, agricultural machinery, pumps and other industrial machinery.

Specifications and Dimension

• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/fsfsdfm.pdf

Features

The shaft diameter is large and can be used without lubrication. The joint kit is bolted in place, making replacement very easy.

Main uses

Construction machinery, machine tools, molding machines, rolling mills, levelers, slitters, agricultural machinery, pumps and other industrial machinery.

Specifications and Dimension

• [Note] For FS, FSD, and FM, the grease nipple protrudes from the periphery of the cross section for the 85 and 100 models in common.
• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/sm-1.pdf

Features

Small flange outer diameter, high torque and high performance.
High speed rotation and long time lubrication-free use.
Extremely smooth power transmission.

Main uses

Rolling mills, printing machines, wire drawing machines, construction machinery, agricultural machinery, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/fh_f.pdf

Features

We can manufacture any type of machined shapes such as spline holes, facing keys, etc., according to shaft diameter and length.
Please specify the machining dimensions for production and quotation.

Specifications and Dimension

• Mounting keys (G × K) on the flange end face are optional.
  *Keyway dimensions (S × T) conform to JIS B1301-1976.
  B1 (flange thickness) and m can be manufactured according to customer specifications.
  We recommend m = φd × 2%.
  Custom-made and special-order specifications are also available. （We can also accept a wide range of requests for joint design (material change, dimensional change, etc.). The values in the table above are standard specifications.
  For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Features

Long-time lubrication-free use at high speed rotation.
Extremely smooth power transmission.

Main uses

Rolling mills, printing machines, wire drawing machines, construction machinery, agricultural machinery, etc.

Specifications and Dimension

We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
Allowable rotational speed varies depending on usage conditions.
The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/sht-1.pdf

Features

Long-time lubrication-free use at high speed rotation.
Extremely smooth power transmission.

Main uses

Rolling mills, printing presses, wire drawing machines, construction machinery, agricultural machinery, etc.
Drive shaft type with SHF and SHD type flange yoke.

Specifications and Dimension

• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The figures in the table above are standard specifications.
  The overall lengths shown are the shortest dimensions possible for standard production. Please specify the overall length when making a production or quotation.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/fh.pdf

Features

This is a heavy-duty joint that confirms Sanyu’s technical capabilities.

Main uses

Large rolling mills, wire drawing machines, construction machinery, traveling cranes, multilevel parking garages, transport equipment, ships, vehicles, etc.
*Specifications of the joint itself can be changed to match the existing flange.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/lcs.pdf

Features

Standard type with bearings.
Continuous high-speed rotation is possible.
LCS-35 and above are equipped with grease nipple.

Main uses

Milling machines, alignment machines, multi-axis drilling machines, various automatic machines, specialized machines, wire drawing machines, rolling machines, straightening machines, roll forming machines, slitter presses, various cranes, construction machinery, conveyors, spinning machines, food machinery, sewing machines, woodworking machinery, automatic packaging machines, vending machines, agricultural machinery, medical equipment, lawn mowers, bookbinding machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/05/ldc.pdf

Features

Standard type with bearings.
Continuous high-speed rotation is possible.
LDC-35 and above are equipped with grease nipple.

Main uses

Milling machines, alignment machines, multi-axis drilling machines, various automatic machines, specialized machines, wire drawing machines, rolling machines, straightening machines, roll forming machines, slitter presses, various cranes, construction machinery, conveyors, spinning machines, food machinery, sewing machines, woodworking machinery, automatic packaging machines, vending machines, agricultural machinery, medical equipment, lawn mowers, bookbinding machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/sus.pdf

Features

This stainless steel joint has excellent corrosion resistance and can withstand the use of chemicals.

Main uses

Pollution control equipment, chemical metering pumps, valves, measuring instruments, food machinery, scientific machinery, vacuum pumps, nuclear equipment, water treatment equipment.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/khs.pdf

Features

The KHS type super joint is a joint developed by our company. Instead of the pin joint method of conventional joints, a full roller bearing is used to minimize contact, friction, etc. at the bearing portion.
Continuous high-speed rotation is possible without feeding.
Nine types of inner diameters from φ10mm to φ30mm are available.

Main uses

Milling machines, Aluminum milling machines, Multi-spindle drilling machines, Various automatic machines, Special-purpose machines, Wire drawing machines, Rolling machines, Straightening machines, Roll forming machines, Slitter presses, Cranes, Construction machinery, Conveyors, Spinning machines, Food machinery, Sewing machines, Woodworking machinery, Automatic packaging machines, Vending machines, Agricultural machinery, Medical equipment, Lawn mowers, Bookbinding machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/lc.pdf

Features

Standard type with bearings.
Continuous high-speed rotation is possible.
LC-35 and above are equipped with grease nipple.

Main uses

Milling machines, alignment machines, multi-axis drilling machines, various automatic machines, specialized machines, wire drawing machines, rolling machines, straightening machines, roll forming machines, slitter presses, various cranes, construction machinery, conveyors, spinning machines, food machinery, sewing machines, woodworking machinery, automatic packaging machines, vending machines, agricultural machinery, medical equipment, lawn mowers, bookbinding machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/05/sud.pdf

Features

This stainless steel joint has excellent corrosion resistance and can withstand the use of chemicals.

Main uses

Pollution control equipment, chemical metering pumps, valves, measuring instruments, food machinery, physical and chemical machinery, vacuum pumps, nuclear equipment, water treatment equipment.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/kh.pdf

Features

The KH type super joint is a joint developed by our company. Instead of the pin-coupling method of conventional joints, it uses a full-color bearing to minimize contact, friction, etc. at the bearing portion.
It is suitable for continuous high-speed rotation with little torque fluctuation due to its non-feeding system.
Nine types are available from φ10 mm to φ30 mm bore diameters.

Main uses

Milling machines, Aluminum milling machines, Multi-spindle drilling machines, Various automatic machines, Special-purpose machines, Wire drawing machines, Rolling machines, Straightening machines, Roll forming machines, Slitter presses, Cranes, Construction machinery, Conveyors, Spinning machines, Food machinery, Sewing machines, Woodworking machinery, Automatic packaging machines, Vending machines, Agricultural machinery, Medical equipment, Lawn mowers, Bookbinding machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/su.pdf

Features

This stainless steel joint has excellent corrosion resistance and can withstand the use of chemicals.

Main uses

Pollution control equipment, chemical metering pumps, valves, measuring instruments, food machinery, scientific machinery, vacuum pumps, nuclear equipment, water treatment equipment.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/ls.pdf

Features

It can be extended and retracted back and forth, left and right, and can be used in a wide range of applications while in motion.

Main uses

Other industrial machinery such as levelers, slitters, forming machines, wire drawing machines, printing machines, rolling machines, etc.

Specifications and Dimension

• We also accept custom-made and special-order specifications. （We can also provide custom-made products (change of material, change of dimensions, etc.). The values in the table above are standard specifications.
  The overall length L in the table is the dimension of the standard production range. When making a production or quotation, please specify the overall length with the shortest length within the MIN and MAX ranges.
  When using old JIS keys, please indicate so. If no indication is given, the product will be manufactured with the new JIS key indicated.
  For safety reasons, please do not change the specifications or disassemble the product. If you have no choice but to do so, please contact us.
  Allowable rotational speed varies depending on usage conditions.
  The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
  Specifications and dimensions are subject to change without notice.
  Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/l.pdf

Features

16 types of inner diameters from φ6mm to φ60mm.
Since the yoke body is not hardened, additional machining can be performed at the delivery site.

Main uses

Various automatic machines, specialized machines, printing machines, paper machines, blowers, rolling machines, levelers, slitters, wire drawing machines, forming machines, conveyors, valve controls, and other industrial machinery.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/ld.pdf

Features

16 types of inner diameters from φ6mm to φ60mm.
Since the yoke body is not hardened, additional machining can be performed at the delivery site.

Main uses

Various automatic machines, specialized machines, printing machines, paper machines, blowers, rolling machines, levelers, slitters, wire drawing machines, forming machines, conveyors, valve controls, and other industrial machinery.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/kd.pdf

Features

19 types of inner diameters from φ6mm to φ100mm.
Since the yoke body is not hardened, additional machining can be performed at the delivery site.
No intermediate shaft is required to connect two K-type yokes, allowing installation in narrower spaces.

Main uses

Various automatic machines, specialized machines, printing machines, paper machines, blowers, rolling machines, levelers, slitters, wire drawing machines, forming machines, conveyors, valve controls, and other industrial machinery.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.

Catalouge: http://www.sanyutec.co.jp/wp/wp-content/uploads/2016/04/k.pdf

Features

19 types of inner diameters from φ6mm to φ100mm.
Since the yoke body is not hardened, additional machining can be performed at the delivery site.

Main uses

Various automatic machines, specialized machines, printing machines, paper machines, blowers, rolling machines, levelers, slitters, wire drawing machines, forming machines, conveyors, valve controls, and other industrial machinery.

Specifications and Dimension

• We also accept custom-made and special-order specifications. (Change of material, change of dimensions, etc.) We can meet a wide range of requests for joint design. The values in the table above are standard specifications.
• For safety reasons, please do not change specifications or disassemble the product. If you have no choice but to do so, please contact us.
• Allowable rotational speed varies depending on usage conditions.
• The allowable angle can be wider than indicated, but it may adversely affect the transmission efficiency and life of the product.
• Specifications and dimensions are subject to change without notice.
• Keyway dimensions A x B conform to JISB1301-1976.