Tokyo Ko-on Denpa | Kouei Japan Trading | Get Quotation

Tokyo Ko-on Denpa TYPE-E Series Variable Potentiometer

kvt part2 — Mon, 02 Mar 2026 04:47:33 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE-E Series

Features

Au-plated contact materials (Low contact resistance). Φ30mm body.
3 types attenuation circuits.
Used a highly precise resistor. Rear terminal.

Specifications

Electrical Specifications

Electrical specifications

TYPE-E Series

Attenuation

BTS-50dB: 0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 37, 42, 50, cut-off
Other: Please see product list.

Attenuation accuracy

Attenuation step	Error in step	Max. Attenuation
0.5dB or less	Less than ±0.05	Less than ±0.1
1 – 2dB	Less than ±0.1	Less than ±0.2
3dB or more	Less than ±0.2	Less than ±0.4

Accuracy of impedance

±2% (Impedance 600ohm), ±5% (Other impedance)

Cut off [15kHz]

Cut-off	Max. Attenuation	Impedance
80dB Min.	50dB	600ohm
70dB Min.	50dB	7kohm
58dB Min.	20dB	7kohm

Voltage proof

1 Min. at AC500V

Insulation resistance

50Mohm or more at DC500V

Input level

Max. 0.3W

Rotational life

30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

Mechanical Specifications

Mechanical specifications	TYPE-E Series
Operating angle	[ (Step angle) x (Number of steps) ] degrees ±2 degrees
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3 to 5mm) or Hexagonal nut (M9)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	TYPE-E Series
Temperature range	-10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE-E Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa Dust Cover for Profader

kvt part2 — Thu, 13 Aug 2020 06:41:53 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: Dust Cover

Features

Applications	Use by attaching it to the fader body or to the back of the panel.
Features	Materials: Felt fabric Double-sided tape (Product already attached).
Size	t=0.3~0.5
Order No.	For 100mm faders : DUSTCOVER100MM 60mm faders : DUSTCOVER60MM 45mm faders : DUSTCOVER45MM
Note	The cover and control-bar rub against each other, resulting in a slight change in operating-force and feel. Purchase Unit : 250 pcs When cleaning, do not use cleaning solutions. Dust should be removed with a brush or similar tool.

The post Tokyo Ko-on Denpa Dust Cover for Profader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP-1, CP-2 KNOB for Profader

kvt part2 — Thu, 13 Aug 2020 06:34:09 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP-1, CP-2

Features

CP-1

Applications	Exclusive use of the “TKD PROFADER”
Features	Materials: ABS Use metallic plating (Conductive Type)
Standard Type color	Red, Black, White, Ivory, Orange, Yellow, Green, Blue, Sky blue, Grey, Brown
Conductive Type color	Gold, Silver, Bronze
Size	CP-1: 16W x 9H x 25D

CP-2

Applications	Exclusive use of the “TKD PROFADER”
Features	Materials: ABS Use metallic plating (Conductive Type)
Standard Type color	Red, Black, White, Ivory, Orange, Yellow, Green, Blue, Sky blue, Grey, Brown
Conductive Type color	Gold, Silver, Bronze
Size	11W x 9H x 25D

Specifications

Specification	CP
Base Materials	ABS
Color	Brown, Red, Orange, Yellow, Green, Blue, Light blue, Gray, White, Ivory-white
Conductivity Materials	Base materials: ABS (color black)
Conductivity Finish	Plating
Conductivity Color	Gold, Silver, Bronze

General Specifications

Specification	CP
Temperature Range	-20 to +80 degrees C
Relative Humidity	90%RH (No condensation)

Dimensions

The post Tokyo Ko-on Denpa CP-1, CP-2 KNOB for Profader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa DRB-KIT 11.11k Assembly Kit

kvt part2 — Thu, 13 Aug 2020 06:21:33 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: DRB-KIT 11.11k

Features

Features	This is assembly kit.
Total resistance	11.11kohm (1ohm x10, 10ohm x10, 100ohm x10, 1kohm x10)
Use resistor	SW1 (1/4W 1kΩ ±0.1% 25ppm/degs.C x10) SW2 (1/4W 100Ω ±1% 100ppm/degs.C x10) SW3 (1/4W 10Ω ±1% 100ppm/degs.C x10) SW4 (1/4W 1Ω ±1% 100ppm/degs.C x10)
Use rotary switch	RBP25-1-1-11-15KC (SONG HUEI ELECTRIC CO.,LTD) Operating angle : 300degrees ±2degrees Step angle : 30degrees ±1degrees Contact resistance : 50mohm or less

Dimensions

The post Tokyo Ko-on Denpa DRB-KIT 11.11k Assembly Kit first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa TYPE 36R-KIT Assembly Kit

kvt part2 — Thu, 13 Aug 2020 06:06:30 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE 36R-KIT

Features

Features	0.5W metal film resistor used.
Frequency range	DC – 20kHz
Circuit	Potentiometer
Total resistance	10kohm, 50kohm, 100kohm
Max Power Rating	0.5W
Size	dia.36 x **mm (Please see datasheet)

Specifications

Electrical Specifications

Specification	36R-KIT Series
Circuit Method	Potentiometer
Attenuation	0, 2, 4, 6,… (2dB step) …, 30, 33, 36, 40, 45, 50, 60, Cut off
Attenuation Accuracy	±0.5dB
Max Attenuation	60dB ± 0.5dB
Cut off	80dB Min.
Matching Accuracy	0.5dB or less (0dB – 60dB)
Number of Circuits	Max 4
Total Resistance	10kohm, 50kohm, 100kohm ±3%
Insertion Loss	0.3dB or less
Input Level	Max. 0.5W
Frequency Range	DC – 20kHz
Voltage Proof	1 Min. at AC250V
Insulation Resistance	100M ohm or more at DC500V
Rotational Life	30,000 Cycles Min. (18cyles/min, Attenuation accuracy: ±1dB or less)

Mechanical Specifications

Specification	36R-KIT Series
Operating Angle	330 degrees ±2 degrees
Step Angle	15 degrees ±1 degrees
Strength of Nut-attached	50Ncm
Attached Parts	Hexagonal nut (M9)
Stopper Strength	50Ncm
Push-pull Strength	50N

Other Specifications

Specification	36R-KIT Series
Temperature Range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative Humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE 36R-KIT Assembly Kit first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa Correctohm-CM Series Axial Type Resistor

kvt part2 — Thu, 13 Aug 2020 02:50:41 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CM Series

Electrical specifications

Product Type	Rated Power [W] 70°C	Highest Usable Voltage [V]	Extreme Highest Overload Voltage [V]	Applicable Temperature Range [°C]
CM1/8	0.125	150	300	-55 ~ 155
CM1/4	0.25	250	500
CM1/2	0.5	350	700
CM1	1.0	500	1000
CM2	2.0	500	1000

General specifications

Storage temperature range	-10 to +50 degrees C
Relative humidity	85%RH (No condensation)

Dimensions

Product Type	D [mm]	L [mm]	d [mm]	L1 [mm]	C [mm]
CM1/8	1.6±0.2	3.7±0.2	0.4±0.05	27±2	4.5 or less
CM1/4	2.3±0.2	6.3±0.5	0.6±0.05	27±2	7.5 or less
CM1/2	3.6±0.5	9.0±0.5	0.6±0.05	27±2	10.5 or less
CM1	4.8±0.4	14.2±0.8	1.0±0.05	27±2	16.0 or less
CM2	8.0±0.5	17.5±1.0	1.0±0.05	27±2	19.5 or less

The post Tokyo Ko-on Denpa Correctohm-CM Series Axial Type Resistor first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa Correctohm-RN14 Series Axial Type Resistor

kvt part2 — Thu, 13 Aug 2020 02:37:01 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: RN14 Series

Electrical specifications

Product Type	Rated Power [W] 70°C	Highest Usable Voltage [V] 70°C	Extreme Highest Overload Voltage [V]	Applicable Temperature Range [°C]
RN14 2B	0.25	250	500	-55 ~ 155
RN14 2E	0.5	300	700	-55 ~ 155

General specifications

Storage temperature range	-10 to +50 degrees C
Relative humidity	85%RH (No condensation)

Dimensions

Product Type	D [mm]	L [mm]	d [mm]	L1 [mm]	C [mm]
RN14 2B	2.3±0.2	6.3±0.5	0.6±0.05	27±2	7.5 or less
RN14 2E	3.6±0.5	9.0±0.5	0.6±0.05	27±2	10.5 or less

The post Tokyo Ko-on Denpa Correctohm-RN14 Series Axial Type Resistor first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa Correctohm-SRN Series Axial Type Resistor

kvt part2 — Thu, 13 Aug 2020 02:24:22 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: Correctohm-SRN Series

Electrical specifications

Product Type	Rated Power [W] 70°C	Highest Usable Voltage [V] 70°C	Extreme Highest Overload Voltage [V]	Applicable Temperature Range [°C]
SRN55	0.1	200	400	-25 ~ 125
SRN60	0.125	250	500
SRN65	0.25	300	600
SRN70	0.5	350	700

General specifications

Storage temperature range	-10 to +50 degrees C
Relative humidity	85%RH (No condensation)

Dimensions

The post Tokyo Ko-on Denpa Correctohm-SRN Series Axial Type Resistor first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa Correctohm-RN Series Axial Type Resistor

kvt part2 — Thu, 13 Aug 2020 01:59:39 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: Correctohm-RN Series

Electrical specifications

Product Type	Rated Power [W]		Highest Usable Voltage [V]		Extreme Highest Overload Voltage [V]	Applicable Temperature Range [°C]
Product Type	125°C	70°C	125°C	70°C	Extreme Highest Overload Voltage [V]	Applicable Temperature Range [°C]
RN50	0.05	0.1	200	200	400	-55 ~ 175
RN55	0.1	0.125	200	250	400
RN60	0.125	0.25	250	300	500
RN65	0.25	0.5	300	350	600
RN70	0.5	0.75	350	400	700
RN75	1	1.5	500	600	1000

General specifications

Storage temperature range	-10 to +50 degrees C
Relative humidity	85%RH (No condensation)

The post Tokyo Ko-on Denpa Correctohm-RN Series Axial Type Resistor first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa RR16G Series Rotary Switch

kvt part2 — Thu, 13 Aug 2020 01:27:26 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: RR16G Series
Product: Rotary Switch

Features

Au-plated contacts

Applications

Various audio equipment, Communication facilities

Specifications

	Electrical Specifications – RR16G
Max rating	AC 100V 300mA. DC 100V 150mA
Contact resistance	15mohm or less
Voltage proof	1 Min. at AC250V
Insulation resistance	100Mohm or more at DC500V
Rotational life (No-load)	30,000 Cycles Min. (18 cycles/min, Contact resistance: Less than 100mohm)
Production range	Number of wafers		1		2		3		4		5
	Number of Poles		1	2	2	4	3	6	4	8	5	10
	Number of contacts per pole	15 degrees	23	11	23	11	23	11	23	11	23	11
	Number of contacts per pole	30 degrees	11	6	11	6	11	6	11	6	11	6

	Mechanical Specifications – RR16G
Indexing angle	15 degrees, 30 degrees
Rotational torque	2~6 Ncm (Varies by number of circuits)
Strength of Screw-Attached	30 Ncm
Attached Parts	M2 x 3mm or M2.3 x 4mm
Stopper strength	50 Ncm
Push-pull strength	50 N

	General Specifications – RR16G
Temperature range	-10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa RR16G Series Rotary Switch first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa 2R6-A, 4R6-A Rotary Switch

kvt part2 — Thu, 13 Aug 2020 01:01:29 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: 2R6-A, 4R6-A

Features

Solid-Ag contacts
Excellent stability

Specifications

Contact resistance	5mohm or less
Switching method	Non-Shorting / Shorting
Number of Wafers	1 (2R6), 2 (4R6)
Number of Poles	2 (2R6), 4 (4R6)
Number of contact Per Poles	6 (max)
Max Rating	AC100V 1A, DC70V 1A
Indexing angle	30 degrees

Dimensions

2R6-A (Non-Shorting)

2R6-AM (Shorting)
4R6-A (Non-Shorting)

4R6-AM (Shorting)

The post Tokyo Ko-on Denpa 2R6-A, 4R6-A Rotary Switch first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP600 Series Variable Attenuator

kvt part2 — Sun, 09 Aug 2020 08:44:34 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP600 Series

Features

Conductive plastic resistor element used (Low rotational noise). 16mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 6

Specifications

Electrical Specifications

Parameter	Details
Products	CP601-*
Attenuation Direction [Load: high]	CCW (Large attenuation & cut-off) → CW (Small attenuation)
Degrees (CCW to CW)	300, 285, 270, 255, 240, 225, 210, 195, 180, 165, 150, 135, 120, 105, 90, 75, 60, 45, 30, 15, 0
Attenuation [dB]	Cut-off, 50, 42, 37, 33, 30, 28, 26, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0
Circuit Method	Ladder circuit
Total Resistance (1-C)	5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ
Total Resistance Tolerance	±20%
Attenuation Accuracy [Load: high]	0 – 10 dB: ±1.0 dB, 10 – 30 dB: ±2.0 dB
Matching Accuracy [Load: high]	0 – 10 dB: 0.6 dB, 10 – 30 dB: 1.0 dB
Insertion Loss	0.5 dB or less
Cut-Off [15kHz]	85 dB Min.
Voltage Proof	1 Min. at AC500V
Insulation Resistance	50 MΩ or more at DC500V
Max Rating	0.1 W
Maximum Input Voltage	DC30V or less
Sliding Noise Level	47 mV or less (by JIS C 6443)
Rotational Life	100,000 Cycles Min. (18 cycles/min, Sliding noise level: Less than 100 mV)

Electrical specificationsCP600 Series
* [Load: high] The output side load should be used with high impedance (20 times or more than the total resistance value).

Mechanical Specifications

Parameter	Details
Mechanical Specifications	CP600 Series
Operating Angle	300 degrees ±5 degrees
Rotational Torque	0.1 to 1.2 Ncm (varies depending on the number of circuits)
Strength (Nut-Attached)	50 Ncm
Attached Parts	Hexagonal nut (M8)
Stopper Strength	50 Ncm
Push-Pull Strength	50 N

General Specifications

Parameter	Details
General Specifications	CP600 Series
Temperature Range	-10°C to +70°C (Operating), -15°C to +75°C (Storage)
Relative Humidity	90% RH (No condensation)

The post Tokyo Ko-on Denpa CP600 Series Variable Attenuator first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP2511 Series Variable Attenuator

kvt part2 — Sun, 09 Aug 2020 08:29:08 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP2511 Series

Features

Conductive plastic resistor element used (Low rotational noise). 25mm square body.
315 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 8

Specifications

Electrical Specifications

Electrical specifications

CP2511 Series

Products

*CP2511*-*

Attenuation direction [Load: high]

CCW (Large attenuation & cut off) – CW (Small attenuation)

Degrees (CCW to CW)

Degrees	315	300	285	270	255	240	225	210	195	180	165	150	135	120	105	90	75	60	45	30	15	0
Attenuation [dB]	Cut-off	50	42	37	34	32	30	28	26	24	22	20	18	16	14	12	10	8	6	4	2	0

Circuit method

Ladder circuit

Total resistance (1-C)

5kohm, 10kohm, 50kohm, 100kohm

Total resistance tolerance

±20%

Attenuation accuracy [Load: high]

0 – 10dB: ±1.0dB
– 30dB: ±2.0dB
– 42dB: ±3.0dB

Matching accuracy [Load: High]

0 – 10dB: 1.0dB
– 30dB: 1.5dB
– 42dB: 2.5dB

Insertion loss

0.5dB or less

Cut off [15kHz]

85dB Min.

Voltage proof

1 Min. at AC500V

Insulation resistance

50Mohm or more at DC500V

Max rating

0.1W

Maximum input voltage

DC30V or less

Sliding noise level

47mV or less (by JIS C 6443)

Rotational life

100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

* [Load: high] The output side load should be used with high impedance (20 times or more than the total resistance value).

Mechanical Specifications

Mechanical specifications	CP2511 Series
Operating angle	315 degrees ±5 degrees
Rotational torque	0.1 to 1.5Ncm (Different by number of circuit)
Strength Nut-Attached	50Ncm
Attached parts	Hexagonal nut (M9)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	CP2511 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa CP2511 Series Variable Attenuator first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP2500 Series Variable Attenuator

kvt part2 — Sun, 09 Aug 2020 07:16:51 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP2500 Series
Product: Variable Attenuator

Features

Conductive plastic resistor element used (Low rotational noise). 25mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 8

Specifications

Electrical Specifications

Parameter	Details
Electrical Specifications	CP2500 Series
Products	CP2500-*
Attenuation Direction [Load: high]	CCW (Large attenuation & cut-off) → CW (Small attenuation)
Degrees (CCW to CW)	300, 285, 270, 255, 240, 225, 210, 195, 180, 165, 150, 135, 120, 105, 90, 75, 60, 45, 30, 15, 0
Attenuation [dB]	Cut-off, 58, 48, 42, 37, 33, 30, 27, 24, 22, 20, 18, 16, 14, 12, 10, 8, 6, 4, 2, 0
Circuit Method	Ladder circuit
Total Resistance (1-C)	5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ
Total Resistance Tolerance	±20%
Attenuation Accuracy [Load: high]	0 – 10 dB: ±1.0 dB, 10 – 30 dB: ±2.0 dB, 30 – 42 dB: ±3.0 dB
Matching Accuracy	0 – 10 dB: 1.0 dB, 10 – 30 dB: 1.5 dB, 30 – 42 dB: 2.5 dB
Insertion Loss	0.5 dB or less
Cut-Off [15kHz]	85 dB Min.
Voltage Proof	1 Min. at AC500V
Insulation Resistance	50 MΩ or more at DC500V
Max Rating	0.1 W
Maximum Input Voltage	DC30V or less
Sliding Noise Level	47 mV or less (by JIS C 6443)
Rotational Life	100,000 Cycles Min. (18 cycles/min, Sliding noise level: Less than 100 mV)

* [Load: high] The output side load should be used with high impedance (20 times or more than the total resistance value).

Mechanical Specifications

Parameter	Details
Mechanical Specifications	CP2500 Series
Operating Angle	300 degrees ±5 degrees
Rotational Torque	0.1 to 1.5 Ncm (varies depending on the number of circuits)
Strength (Nut-Attached)	50 Ncm
Attached Parts	Hexagonal nut (M9)
Stopper Strength	50 Ncm
Push-Pull Strength	50 N

General Specifications

Parameter	Details
General Specifications	CP2500 Series
Temperature Range	-10°C to +70°C (Operating), -15°C to +75°C (Storage)
Relative Humidity	90% RH (No condensation)

The post Tokyo Ko-on Denpa CP2500 Series Variable Attenuator first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa TYPE P2550, P2560 Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 06:41:24 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE P2550, P2560

Features

Au-plated contact materials (Low contact resistance).
22 or 21positions (0dB – Cut off or Max.attenuation).
Used a highly precise resistor. 25mm square (Body) Rear terminal

Specifications

Electrical Specifications

Electrical specifications	TYPE P2550/P2560 Series
Products	P2551-*	P2552-*	P253-	P254-	P255-	P256-	P257-	P258-
Attenuation [Load: High]	BTS-50dB		2dB x20		1dB x20		0.5dB x20
Circuit method	Potentiometer circuit
Total resistance (1-C)	1kohm, 7kohm, 10kohm, 100kohm
Total resistance tolerance	±3%
Attenuation accuracy [Load: High]	±0.3dB
Max attenuation [Load: High]	50dB ±0.6dB		40dB ±0.6dB		20dB ±0.6dB		10dB ±0.6dB
Cut off [15kHz]	80dB Min.	–	80dB Min.	–	80dB Min.	–	80dB Min.	–
Insertion loss	0.3dB or less
Frequency range (DC to Max)	DC to 20kHz
Voltage proof	1 Min. at AC500V
Insulation resistance	100Mohm or more at DC500V
Input level	Max. 0.1W
Rotational life	30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

* BTS-50dB: 0, 2, 4, …(2dB step)… , 30, 32, 34, 37, 42, 50, Cut off

* [Load: high] The output side load should be used with high impedance (20 times or more than the total resistance value).

Mechanical Specifications

Mechanical specifications	TYPE P2550/P2560 Series
Operating angle	With cut off: 315 degrees ±2 degrees	Without cut off: 300 degrees ±2 degrees
Step angle	15 degrees
Strength Nut-Attached	50Ncm
Attached parts	Hexagonal nut (M9)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	TYPE P2550/P2560 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE P2550, P2560 Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa TYPE P2510, P2520 Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 06:32:10 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE P2510, P2520

Features

Au-plated contact materials (Low contact resistance).
22 or 21positions (0dB – Cut off or Max.attenuation).
Used a highly precise resistor. 25mm square (Body)

Specifications

Electrical Specifications

Electrical speciications	TYPE P2510/P2520 Series
Products	P2511-*	P2512-	3-*	4-	5-	6-*	P257-	8-
Attenuation [Load: High]	BTS-50dB	2dB x20	1dB x20	0.5dB x20
Circuit method	Potentiometer circuit
Total resistance (1-C)	1kohm, 7kohm, 10kohm, 100kohm
Total resistance tolerance	±3%
Attenuation accuracy [Load: High]	±0.3dB
Max attenuation [Load: High]	50dB ±0.6dB	40dB ±0.5dB	20dB ±0.5dB	10dB ±0.5dB	–
Cut off [15kHz]	80dB Min.	–	80dB Min.	–	80dB Min.	–	80dB Min.	–
Matching accuracy [Load: High]	0.5dB or less
Insertion loss	0.3dB or less
Frequency range (DC to Max)	DC to 20kHz
Voltage proof	1 Min. at AC500V
Insulation resistance	100Mohm or more at DC500V
Input level	Max. 0.1W
Rotational life	30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

* BTS-50dB 0, 2, 4, …(2dB step)… , 30, 32, 34, 37, 42, 50, Cut off
* [Load: high] The output side load should use with high impedance (20 times or more than the total resistance value).

Mechanical Specifications

Mechanical specifications	TYPE P2510/P2520 Series
Operating angle	With cut off: 315 degrees ±2 degrees	Without cut off: 300 degrees ±2 degrees
Step angle	15 degrees
Strength Nut-Attached	50Ncm
Attached parts	Hexagonal nut (M9)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	TYPE P2510/P2520 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE P2510, P2520 Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa TYPE HR23S Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 06:27:20 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE HR23S
Product: Variable Potentiometer

Features Of TYPE HR23S

Au-plated contact materials (Low contact resistance).31positions (0dB – Cut off).
Used a highly precise resistor. 23.5mm square

Specifications

Electrical Specifications

Electrical specifications

TYPE HR23S Series

Products

HR23S-*31R-*-*

Attenuation [Load: High]

CCW (Large attenuation & cut off) – CW (Small attenuation)

Degrees (CCW to CW)	Attenuation [dB]
300 degrees	Cut-off, 50, 46, 43, 40, 37.5, 35, 32.5, 30, …(2dB step)…, 20, …(1.5dB step)…, 11, …(1dB step)…, 1, 0

Circuit method

Potentiometer circuit

Total resistance (1-C)

10kohm, 100kohm

Total resistance tolerance

±3%

Attenuation accuracy [Load: High]

±0.3dB

Max attenuation [Load: High]

50dB ±0.5dB

Cut off [15kHz]

80dB Min.

Matching accuracy [Load: High]

0.5dB or less (0dB to 50dB)

Insertion loss

0.3dB or less

Frequency range (DC to Max)

DC to 20kHz

Voltage proof

1 Min. at AC100V

Insulation resistance

100Mohm or more at DC500V

Input level

Max. 0.1W

Rotational life

30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

Mechanical Specifications

Mechanical specifications	HR23S Series
Operating angle	300 degrees ±2 degrees
Step angle	10 degrees
Strength Nut-Attached	50Ncm
Attached parts	M2.6 screw (Length: Panel thickness + 4mm)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	HR23S Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE HR23S Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa TYPE-D Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 03:52:56 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: TYPE-D Series

Features

Au-plated contact materials (Low contact resistance). Φ36mm body.
4 types attenuation circuits. Used a highly precise resistor.

Specifications

Electrical Specifications

Electrical specifications

TYPE-D Series

Attenuation

BTS-50dB	0, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 37, 42, 50, cut-off
Other	Please see product list.

Attenuation accuracy

Attenuation step	Error in step	Max. Attenuation
0.5dB or less.	Less than ±0.05	Less than ±0.1
1 – 2dB	Less than ±0.1	Less than ±0.2
3dB or more	Less than ±0.2	Less than ±0.4

Accuracy of impedance

±2% (Impedance 600ohm), ±5% (Other impedance)

Cut off [15kHz]

Cut-off	Max. Attenuation	Impedance
80dB Min.	50dB	600ohm
70dB Min.	50dB	7kohm
58dB Min.	20dB	7kohm

Voltage proof

1 Min. at AC500V

Insulation resistance

50Mohm or more at DC500V

Input level

Max. 0.3W

Rotational life

30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

Mechanical Specifications

Mechanical specifications	TYPE-D Series
Operating angle	[ (Step angle) x (Number of steps) ] degrees ±2 degrees
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3 to 5mm) or Hexagonal nut (M9)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	TYPE-D Series
Temperature range	-10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa TYPE-D Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa P65C Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 02:43:47 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: P65C Series

Features

Au-plated contact materials (Low contact resistance). 41positions (0dB – Cut off).
Used a highly precise resistor. 2 type click torque.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)

P65C Series

Products

*P65C*-G-*

Attenuation [Load: High] BTS-65dB

CCW (Large attenuation & cut off) – CW (Small attenuation)

Degrees (CCW to CW)	320 degrees	312 to 8 degrees (8 degrees step)	0 degrees
Attenuation [dB]	Cut-off	65, 58, 53, 48.5, 45, 42, 39.5, …(2dB step)…, 31.5, …(1.5dB step)…, 24, …(1dB step)…, 1	0

Circuit method

Potentiometer circuit

Total resistance (1-C)

1kohm, 10kohm, 50kohm, 100kohm, 250kohm

Total resistance tolerance

±5%

Attenuation accuracy [Load: High]

±0.3dB

Max attenuation [Load: High]

65dB ±1.0dB

Cut off [15kHz]

80dB Min.

Matching accuracy [Load: High]

0.5dB or less (0dB to 65dB)

Insertion loss

0.3dB or less

Frequency range (DC to Max)

Total resistance	1kohm	10kohm, 50kohm	100kohm	250kohm
Max	100kHz	50kHz	20kHz	15kHz

Voltage proof

1 Min. at AC500V

Insulation resistance

100Mohm or more at DC500V

Input level

Max. 0.3W

Rotational life

30,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)

Mechanical Specifications

Mechanical specifications	P65C Series
Operating angle	320 degrees ±2 degrees
Step angle	8 degrees
Operating force	P65C: 0.1 – 1.5 Ncm (Non-stepper type) P65CS: 8 – 10 Ncm (Stepper type) P65CLS: 0.5 – 1.5 Ncm (Soft Stepper type)
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3 to 5mm)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	P65C Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa P65C Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP600 Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 02:24:58 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP600 Series

Features

Conductive plastic resistor element used (Low rotational noise). 16mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 6

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	CP600 Series
Products	CP601-A*	CP601-B*	CP601-C*
Circuit method	Potentiometer circuit
Total resistance (1-C)	5kohm, 10kohm, 50kohm, 100kohm
Total resistance tolerance	±20%
Taper tolerance (150 degs)	10 – 25%	40 – 60%	10 – 25%
Residual resistance	Terminal 2 to C: 1% or 100ohm Terminal 1 to 2: 1%	1 to 2: 1% or 100ohm Terminal 2 to C: 1% or 100ohm	Terminal 1 to 2: 1% or 100ohm 2 to C: 1%
Matching accuracy (150 degs)	3dB Max.
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.1W (Taper-B), 0.05W (Other taper)
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications

Mechanical specifications	CP600 Series
Operating angle	300 degrees ±5 degrees
Rotational torque	0.1 to 1.2Ncm (Different by number of circuit)
Strength Nut-Attached	50Ncm
Attached parts	Hexagonal nut (M8)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	CP600 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa CP600 Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CP2500 Series Variable Potentiometer

kvt part2 — Sun, 09 Aug 2020 02:12:13 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CP2500 Series

Features

Conductive plastic resistor element used (Low rotational noise). 25mm square body.
300 degree operating angle. Highly dustproof.
Maximum number of interlocking circuits: 8

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	CP2500 Series
Products	CP2508-A*	CP2500-B*	CP2500-C*
Circuit method	Potentiometer circuit
Total resistance (1-C)	5kohm, 10kohm, 50kohm, 100kohm
Total resistance tolerance	±20%
Taper tolerance (150 degs)	10 – 25%	40 – 60%	10 – 25%
Residual resistance	Terminal 2 to C: 1% or 100ohm Terminal 1 to 2: 1%	1 to 2: 1% or 100ohm Terminal 2 to C: 1% or 100ohm	Terminal 1 to 2: 1% or 100ohm 2 to C: 1%
Matching accuracy (150 degs)	3dB Max.
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.1W (Taper-B), 0.05W (Other taper)
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications

Mechanical specifications	CP2500 Series
Operating angle	300 degrees ±5 degrees
Rotational torque	0.1 to 1.5Ncm (Different by number of circuit)
Strength Nut-Attached	50Ncm
Attached parts	Hexagonal nut (M9x0.75)
Stopper strength	50Ncm
Push-pull strength	50N

General Specifications

General specifications	CP2500 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa CP2500 Series Variable Potentiometer first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa VP-502A Series T-Bar Controller

kvt part2 — Sun, 09 Aug 2020 02:01:14 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: VP-502A Series

Features

Conductive plastic resistor element used (Low slide noise). 20mm control-bar.
Slide switch (at both ends ON) is optional.

Specifications

Electrical Specifications

Electrical specifications	VP-502A Series
Products	VP-502A-*
Number of circuits / Type of output laws	1 Linear taper
Circuit method	Potentiometer circuit
Total resistance (1-C)	5kohm, 10kohm
Total resistance tolerance	±20%
Linearity	±5%
Residual resistance (1-2), (2-C)	30ohm or less
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.1W
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	DC30V 50mA
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications

Mechanical specifications	VP502A Series
Operating angle	60 degrees ±1 degree
Operating force	0.3 to 0.5N
Stopper strength	50N
Push-pull strength	50N

General Specifications

General specifications	VP502A Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa VP-502A Series T-Bar Controller first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa VP-1002A Series T-Bar Controller

kvt part2 — Sun, 09 Aug 2020 01:55:38 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: VP-1002A Series

Features

Conductive plastic resistor element used (Low slide noise). 50mm control-bar.
Slide switch (at both ends ON) is optional.

Specifications

Electrical Specifications

Electrical specifications	VP-1002A Series
Products	VP-1002A-*
Number of circuits / Type of output laws	1 Linear taper
Circuit method	Potentiometer circuit
Total resistance (1-C)	5kohm, 10kohm
Total resistance tolerance	±20%
Linearity	±5%
Residual resistance (1-2), (2-C)	30ohm or less
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.1W
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	DC30V 50mA
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications

Mechanical specifications	VP1002A Series
Operating angle	60 degrees ±1 degrees
Operating force	0.3 to 0.5N
Stopper strength	50N
Push-pull strength	50N

General Specifications

General specifications	VP1002A Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa VP-1002A Series T-Bar Controller first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa 45LT-R2 Series Input, Cross Fader

kvt part2 — Fri, 07 Aug 2020 08:55:09 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: 45LT-R2 Series

Features

Direct print resistor element used (Special surface treatment).
Equipped with a torque adjustment mechanism with good feel.
Horizontal style control-bar design.
Durable system which adopted the shaft of the high quality.
Connector terminal style.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	45LT-R2 Series
Products	45LT-R2-CN0-B*
Number of circuits / Type of output laws	1 Linear taper
Circuit method	Potentiometer circuit
Total resistance (1-2), (6-4)	10kohm, 50kohm
Total resistance tolerance	±20%
Absolute linearity	±5%
Residual resistance (1-3), (1-4)	60ohm or less
Voltage proof	1 Min. at AC100V
Insulation resistance	50Mohm or more at DC250V
Max rating	0.1W
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	AC125V 3A, DC30V 2A (OMRON D2F-F)
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Connector (4pin)	B4B-EH (EH Series: J.S.T.MFG.CO.,LTD.)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	45LT-R2 Series
Travel (Stroke) length	44mm ±0.5mm
Operating force	0 to 0.1N 0 to 0.5N (Torque adjustment screw)
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	50N
Push-pull strength	50N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	45LT-R2 Series
Temperature range	-10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa 45LT-R2 Series Input, Cross Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CFX-45L Series Input, Cross Fader

kvt part2 — Fri, 07 Aug 2020 08:28:29 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CFX-45L Series

Features

Conductive plastic resistor element used (Low slide noise).
Horizontal style control-bar design (Protection against dust).
Durable system which adopted the shaft of the high quality.
2-type terminal style.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	CFX-45L Series
Products	CFX-45L-B
Number of circuits / Type of output laws	2 Linear taper x2
Circuit method	Potentiometer circuit
Total resistance (1-2), (6-4)	10kohm, 50kohm
Total resistance tolerance	±20%
Absolute linearity	±5%
Residual resistance (1-3), (2-3), (6-5), (5-4)	5ohm or less
Voltage proof	1 Min. at AC100V
Insulation resistance	50Mohm or more at DC250V
Max rating	0.1W
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	AC125V 3A, DC30V 2A (OMRON D2F-F)
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Connector (6pin)	S6B-EH (EH Series: J.S.T.MFG.CO.,LTD.)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	CFX-45L Series
Travel (Stroke) length	45mm ±0.5mm
Operating force	0 to 0.2N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	40N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	CFX-45L Series
Temperature range	-10 to +60 degrees C (Operating), -15 to +65 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa CFX-45L Series Input, Cross Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa FA-9100 Series Manual Control Fader

kvt part2 — Fri, 07 Aug 2020 07:17:14 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: FA-9100 Series

Features

Au-plated contact materials.
Horizontal style control-bar design (Protection against dust).
Durable system which adopted the shaft of the high quality.
For accurate adjustment (51positions). For reproducible necessary operation.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	FA-9100 Series
Products	FA-910-
Number of circuits	2 (Standard)
Circuit method	Potentiometer circuit
Total resistance (1-2), (7-6)	10kohm
Total resistance tolerance	±3%
Attenuation [Load: high]	0, 1, 2, 3, …(1dB step)…, 40, 42, 44, 46, 48, 50, 55, 60, 65, 70, cut off
Attenuation accuracy [Load: high]	0~20dB: ±0.2dB ~30dB: ±0.4dB ~40dB: ±0.6dB
Matching accuracy	0~20dB: 0.5dB ~30dB: 0.7dB ~40dB: 1.0dB
Insertion loss	0.5dB or less
Cut off (15kHz)	90dB Min.
Voltage proof	1 Min. at AC100V
Insulation resistance	50Mohm or more at DC250V
Max rating	0.1W
Maximum input voltage	DC20V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	200,000 Cycles Min. (18cycles/min, Insertion loss: 1dB or less)
Connector (7pin)	B7B-EH (JST)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	FA-9100 Series
Travel (Stroke) length	100mm ±0.5mm
Operating force	0.1 to 0.3N (Standard), 0.2 to 0.4N (High operating force)
Mechanical clicks	Without
Strength Nut-Attached	100Ncm
Attached parts	M3 screw / 4-40UNC screw (Length: Panel thickness + 3mm)
Stopper strength	40N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	FA-9100 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa FA-9100 Series Manual Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa LSVA Series Manual Control Fader

kvt part2 — Fri, 07 Aug 2020 07:10:36 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: LSVA Series

Features

Direct print resistor element used (Special surface treatment).
Vertical style control-bar design. PCB Terminal style.

Specifications

Electrical Specifications (Initial Value)

Residual voltage (1-2), (2-3)20mV or less-
Electrical specifications (initial value)	LSVA Series
Products	LSVA-****-B	2LSVA-****-B	LSVA-****-	2LSVA-****-
Number of circuits / Type of output laws	1 Linear taper	2 Linear taper x2	1 Audio taper	2 Audio taper x2
Circuit method	Potentiometer circuit		Ladder circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)		–
Residual resistance (1-2), (2-3)	50ohm or less		–
Attenuation accuracy [Load: high]	–		0 – 20dB: ±3.0dB
Matching accuracy	–		–	0 – 20dB: 3.0dB
Insertion loss	–		0.5dB or less
Cut off [15kHz]	–		95dB Min.
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC250V
Max rating	0.2W (Linear taper), 0.1W (Other taper)
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	LSVA-1100 Series	LSVA-6100 Series	LSVA-4500 Series
Travel (Stroke) length	100mm ±0.5mm	60mm ±0.5mm	45mm ±0.5mm
Operating force	0 to 0.1N (Standard) 0.1 to 0.4N (High operating force)
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	30N
Push-pull strength	30N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	LSVA Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa LSVA Series Manual Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa LSVH Series Manual Control Fader

kvt part2 — Fri, 07 Aug 2020 06:59:48 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: LSVH Series
Product: Manual Control Fader

Features

Direct print resistor element used (Special surface treatment).
Horizontal style control-bar design (Protection against dust).
PCB Terminal style.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	LSVH Series
Products	LSVH-***-B	2LSVH-***-B	LSVH-***-	2LSVH-***-
Number of circuits / Type of output laws	1 Linear taper	2 Linear taper x2	1 Audio taper	2 Audio taper x2
Circuit method	Potentiometer circuit		Ladder circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)		–
Residual voltage (1-2), (2-3)	20mV or less		–
Residual resistance (1-2), (2-3)	50ohm or less		–
Attenuation accuracy [Load: high]	–		0 – 20dB: ±3.0dB
Matching accuracy	–		–	0 – 20dB: 3.0dB
Insertion loss	–		0.5dB or less
Cut off [15kHz]	–		95dB Min.
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC250V
Max rating	0.2W (Linear taper), 0.1W (Other taper)
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	LSVH-1100 Series	LSVH-6100 Series
Travel (Stroke) length	100mm ±0.5mm	60mm ±0.5mm
Operating force	0 to 0.1N (Standard) 0.1 to 0.4N (High operating force)
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	30N
Push-pull strength	30N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	LSVH Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa LSVH Series Manual Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CPA-9200 Series Manual Control Fader

kvt part2 — Fri, 07 Aug 2020 06:55:59 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CPA-9200 Series

Features

Conductive plastic resistor element used (Low slide noise). Best touch.
Horizontal style control-bar design (Protection against dust).
Durable system which adopted the shaft of the high quality. 2 types of output laws.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	CPA-9200 Series
Products	CPA-920-B	2CPA-920-B	CPA-920-	2CPA-920-
Number of circuits / Type of output laws	1 Linear taper	2 Linear taper x2	1 Audio taper	2 Audio taper x2
Circuit method	Potentiometer circuit		Ladder circuit
Total resistance (1-C)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)		–
Residual voltage (1-2), (2-3)	10mV or less		–
Residual resistance (1-2), (2-3)	30ohm or less		–
Attenuation accuracy [Load: high]	–		0 – 20dB: ±1.0dB (10dB: ±0.5dB) – 40dB: ±2.0dB
Matching accuracy	–		–	0 – 15dB: 0.5dB – 30dB: 1.0dB – 40dB: 2.0dB
Insertion loss	–		0.5dB or less
Cut off [15kHz]	–		100dB Min.
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.2W (Linear taper), 0.1W (Other taper)
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	AC125V 3A, DC30V 2A (OMRON D2F-F)
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	CPA-9200 Series
Travel (Stroke) length	104mm ±0.5mm
Operating force	0.1 to 0.25N (Standard) 0.2 to 0.4N (High operating force / Center click) 0.6 to 0.9N (Extra high operating force) * Please see Note.
Strength Nut-Attached	100Ncm
Attached parts	M3 screw / 4-40UNC screw (Length: Panel thickness + 3mm)
Stopper strength	50N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	CPA-9200 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa CPA-9200 Series Manual Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa CPA-9100 Series Manual Control Fader

kvt part2 — Fri, 07 Aug 2020 06:51:23 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: CPA-9100 Series
Product: Manual Control Fader

Features

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	CPA-9100 Series
Products	CPA-910-B	2CPA-910-B	CPA-910-	2CPA-910-	CPA-910-AP	2CPA-910-AP
Number of circuits / Type of output laws	1 Linear taper	2 Linear taper x2	1 Audio taper	2 Audio taper x2	1 AP taper	2 AP taper x2
Circuit method	Potentiometer circuit		Ladder circuit
Total resistance (1-C)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)		–
Residual voltage (1-2), (2-3)	10mV or less		–
Residual resistance (1-2), (2-3)	30ohm or less		–
Attenuation accuracy [Load: high]	–		0 – 20dB: ±1.0dB (10dB: ±0.5dB) – 40dB: ±2.0dB
Matching accuracy	–		–	0 – 15dB: 0.5dB – 30dB: 1.0dB – 40dB: 2.0dB	–	0 – 15dB: 0.5dB – 30dB: 1.0dB – 40dB: 2.0dB
Insertion loss	–		0.5dB or less (Audio taper, AP taper)
Cut off [15kHz]	–		100dB Min. (Audio taper, AP taper)
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.2W (Linear taper), 0.1W (Other taper)
Maximum input voltage	DC30V or less
Rated Resistive Load – Switch	AC125V 3A, DC30V 2A (OMRON D2F-F)
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	CPA-9100 Series
Travel (Stroke) length	100mm ±0.5mm
Operating force	0.1 to 0.25N (Standard) 0.2 to 0.4N (High operating force / Center click) 0.6 to 0.9N (Extra high operating force) * Please see Note.
Strength Nut-Attached	100Ncm
Attached parts	M3 screw / 4-40UNC screw (Length: Panel thickness + 3mm)
Stopper strength	50N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	CPA-9100 Series
Temperature range	-10 to +70 degrees C (Operating), -15 to +75 degrees C (Storage)
Relative humidity	90%RH (No condensation)

The post Tokyo Ko-on Denpa CPA-9100 Series Manual Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa MLA Series Motorized Control Fader

kvt part2 — Fri, 07 Aug 2020 06:47:04 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: MLA Series

Features

Direct print resistor element used (Special surface treatment).
Vertical style control-bar design.
PCB Terminal style.
All models include a touch sense track.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	MLA Series
Products	MLA-1100-B*-M8V	MLA-6100-B*-M8V
Number of circuits / Type of output laws	1 Linear taper
Circuit method	Potentiometer circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)
Residual voltage (1-2), (2-3)	20mV or less
Residual resistance (1-2), (2-3)	50ohm or less (Reference values)
Touch sense track contact resistance	30ohm or less (Between terminal T and Control-bar.)
Voltage proof	1 Min. at AC100V
Insulation resistance	50Mohm or more at DC100V
Max rating	0.2W
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Drive motor data	DC8V Iron cored motor : Input voltage: DC5V – 11.5V (Nominal DC8V), Stall current: 0.5A or less [FF-050SB-09250 : MABUCHI MOTOR Co., Ltd.]

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	MLA-1100 Series	MLA-6100 Series
Travel (Stroke) length	100mm ±0.5mm	60mm ±0.5mm
Operating force	0.1 to 0.4N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3~5mm)
Stopper strength	30N
Push-pull strength	30N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	MLA Series
Temperature range	0 to +50 degrees C (Operating), -10 to +60 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa MLA Series Motorized Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa LMA5 Series Motorized Control Fader

kvt part2 — Fri, 07 Aug 2020 06:41:17 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: LMA5 Series
Product: Motorized Control Fader

Features

Direct print resistor element used (Special surface treatment).
Vertical style control-bar design.
PCB Terminal style.
All models include a touch sense track.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	LMA5 Series
Products	LMA5-11*-B-*	LMA5-61*-B-*
Number of circuits / Type of output law	1 Law: Linear taper
Circuit method (Output law)	Potentiometer circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)
Residual voltage (1-2), (2-3)	20mV or less
Residual resistance (1-2), (2-3)	50ohm or less (Reference values)
Touch sense track contact resistance	30ohm or less (Between terminal T and Control-bar.)
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC100V
Max rating	0.2W
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Drive motor data	DC8V Iron cored motor : Input voltage: DC5V – 11.5V (Nominal DC8V), Stall current: 0.5A or less [FF-050SB-09250 : MABUCHI MOTOR Co., Ltd.]

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	LMA5-1101 Series	LMA5-6101 Series
Travel (Stroke) length	100mm ±0.5mm	60mm ±0.5mm
Operating force	0.1 to 0.3N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3~5mm)
Stopper strength	30N
Push-pull strength	30N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	LMA5 Series
Temperature range	-10 to +50 degrees C (Operating), -15 to +60 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa LMA5 Series Motorized Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa LMH5 Series Motorized Control Fader

kvt part2 — Fri, 07 Aug 2020 06:36:00 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: LMH5 Series

Features

Direct print resistor element used (Special surface treatment).
Horizontal style control-bar design (Protection against dust).
PCB Terminal style.
All models include a touch sense track.

Specifications

Electrical Specifications (Initial Value)

Electrical specifications (initial value)	LMH5 Series
Products	LMH5-11*-B-*	LMH5-61*-B-*
Number of circuits / Type of output law	1 Law: Linear taper
Circuit method (Output law)	Potentiometer circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity	±5% (The travel is divided into 10 sections and 11 positions are measured.)
Residual voltage (1-2), (2-3)	20mV or less
Residual resistance (1-2), (2-3)	50ohm or less (Reference values)
Touch sense track contact resistance	30ohm or less (Between terminal T and Control-bar.)
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC100V
Max rating	0.2W
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Drive motor data	DC8V Iron cored motor : Input voltage: DC5V – 11.5V (Nominal DC8V), Stall current: 0.5A or less [FF-050SB-09250 : MABUCHI MOTOR Co., Ltd.]

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	LMH5-1101 Series	LMH5-6101 Series
Travel (Stroke) length	100mm ±0.5mm	60mm ±0.5mm
Operating force	0.1 to 0.3N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3~5mm)
Stopper strength	30N
Push-pull strength	30N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	LMH5 Series
Temperature range	-10 to +50 degrees C (Operating), -15 to +60 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa LMH5 Series Motorized Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa MF-9100 Series Motorized Control Fader

kvt part2 — Fri, 07 Aug 2020 06:28:28 +0000

Made in Japan
Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: MF-9100 Series

Features

Specifications

Electrical Specifications (Initial Value)

Products	MF-9100 Series
Products	MF-910-B-*	MF-910-A-*	MF-910-AP-*
Number of circuits / Type of output laws	1 Law1: Linear taper	2 Law1: Linear taper Law2: Audio taper	2 Law1: Linear taper Law2: AP taper
Circuit method (Output law1)	Potentiometer circuit
Circuit method (Output law2)	–	Ladder circuit
Total resistance (1-C), (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity (Linear taper)	±5% (The travel is divided into 10 sections and 11 positions are measured.)
Residual voltage (1-2), (2-3) (Linear taper)	10mV or less
Residual resistance (1-2), (2-3) (Linear taper)	30ohm or less (Reference values)
Touch sense track contact resistance	20ohm or less (Between terminal 4 and Control-bar.)
Attenuation accuracy [Load: high]	–	0 – 20dB: ±1.0dB (10dB: ±0.5dB) – 40dB: ±2.0dB (Audio taper, AP taper)
Insertion loss	–	0.5dB or less (Audio taper, AP taper)
Cut off [15kHz]	–	100dB Min. (Audio taper, AP taper)
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.2W (Linear taper), 0.1W (Other taper)
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Drive motor data	DC12V Coreless motor : Input voltage: DC12V, Stall current: 0.55A or less [12CL-3035 (Custom-made for TKD.) : Orbray Co., Ltd.] DC8V Iron cored motor : Input voltage: DC5V – 11.5V (Nominal DC8V), Stall current: 0.5A or less [FF-050SB-09250 : MABUCHI MOTOR Co., Ltd.]

Mechanical Specifications (Initial Value)

Mechanical specifications (Initial value)	MF-9100 Series
Travel (Stroke) length	100mm ±0.5mm
Operating force	0.1 to 0.3N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	40N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

General specifications	MF-9100 Series
Temperature range	-10 to +50 degrees C (Operating), -15 to +60 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa MF-9100 Series Motorized Control Fader first appeared on Kouei Japan Trading | Get Quotation.

Tokyo Ko-on Denpa MF-914 Series Motorized Control Fader

kvt part2 — Fri, 07 Aug 2020 03:06:25 +0000

Manufacturer: Tokyo Ko-on Denpa Co., Ltd.
Model: MF-914 Series
Product: Motorized Control Fader

Features

Specifications

Electrical Specifications (Initial Value)

Products	MF-914-B-
Number of circuits / Type of output laws	1 / Linear taper
Circuit method (Output law)	Potentiometer circuit
Total resistance (1-3)	10kohm, 5kohm
Total resistance tolerance	±20%
Absolute linearity (Linear taper)	±5% (10 sections, 11 positions measured)
Residual voltage (1-2), (2-3) (Linear taper)	10mV or less
Residual resistance (1-2), (2-3) (Linear taper)	30ohm or less (Reference values)
Touch sense track contact resistance	20ohm or less (Between terminal 4 and Control-bar)
Voltage proof	1 Min. at AC500V
Insulation resistance	50Mohm or more at DC500V
Max rating	0.2W
Maximum input voltage	DC30V or less
Sliding noise level	47mV or less (by JIS C 6443)
Sliding life	100,000 Cycles Min. (18cycles/min, Sliding noise level: Less than 100mV)
Drive motor data	DC12V Coreless motor : Input voltage: DC12V, Stall current: 0.55A or less [12CL-3035 (Custom-made for TKD.) : Orbray Co., Ltd.] DC8V Iron cored motor : Input voltage: DC5V – 11.5V (Nominal DC8V), Stall current: 0.5A or less [FF-050SB-09250 : MABUCHI MOTOR Co., Ltd.]

Mechanical Specifications (Initial Value)

Travel (Stroke) length	100mm ±0.5mm
Operating force	0.1 to 0.3N
Strength Nut-Attached	100Ncm
Attached parts	M3 screw (Length: Panel thickness + 3mm)
Stopper strength	40N
Push-pull strength	40N
Alignment to the center	±0.5mm (State not to pressure control-bar, Measurement position: Mounting surface)

General Specifications

Temperature range	-10 to +50 degrees C (Operating), -15 to +60 degrees C (Storage)
Relative humidity	80%RH (No condensation)

The post Tokyo Ko-on Denpa MF-914 Series Motorized Control Fader first appeared on Kouei Japan Trading | Get Quotation.