Features

• This humidity cabinet is designed to store mortar samples at constant temperature and humidity prior to curing in water or physical test.
• Both the temperature and humidity value are input by user easily and option to switch on or off the recording chart for future reference.
• The cabinet has two layers of insulation, that is the main outer door and inner transparent door to ensure the temperature and humidity remain consistent for the duration of test.
• Its main water tank has a sensor to alert the user in case the water level runs low.

Specification

Power supply : 220 ~ 240 VAC, Single phase, 50 Hz
Internal dimension (mm) : 540 Width x 540 Depth x 1100 Height
External dimension (mm) : 740 Width x 950 Depth x 1870 Height
Temperature range : 15 ~ 30c
Humidity range : 60 ~ 99 %RH
Weight : 300 kg

Model Available

CUT 150/25EN         1500 / 250kN Twin Frame Computer Automatic Test Machine

CUT 200/25EN       2000 / 250kN Twin Frame Computer Automatic Test Machine

CUT 250/25EN       2500 / 250kN Twin Frame Computer Automatic Test Machine

CUT 399/25EN       3000 / 250kN Twin Frame Computer Automatic Test Machine

Features

These computer control automatic Twin Frame machines are designed to test accordance to above relevant standard. The load rate are control by computer according to specify and automatically stop when the maximum load are achieve. Test result and specimen information are automatic calculate in Mpa (N/mm₂) density (kg/m³) and printed or stored in database which can be access at anytime.

These Twin Frame machines are designed to test concrete and cement strength on one automatic computer control console and it can accept concrete sample size 200mm, 150mm, 100mm, 50mm, cube and cylinder 15cm x 30cm (H), and cement sample 40 x 40 x 160 prism. Machine meet BS 12390 Annex A, B, and BS EN 196-1

Specification

• Optional digital top pan balance 12kg x 1gm to connect to Computer

• Calibrated meet to BS EN 12390, ASTM E4, BS 1610

• Test 200, 150, 100, 70.7, 50 and 40mm cube, cylinder specimen up to 150mm and 100mm diameter and 40 x 40 x 160mm prism specimen

• Meet BS 1881 part 115, EN 12390 Annex A (Force Transfer) and ASTM C 109 EN 196-1

• Concrete Compression Test 0-2000, 2500, 3000kN x 0.1kN per resolution

• Cement Compression Test 0-250, 300kN, 500kN x 0.01kN per resolution

Available Model:

ADS 200/25EN Automatic Twin Frame 2000/250kN Concrete/Cement Compression Test Machine

ADS 250/25EN Automatic Twin Frame 2500/250kN Concrete/Cement Compression Test Machine

ADS 300/25EN Automatic Twin Frame 3000/250kN Concrete/Cement Compression Test Machine

Standard: B.S. 1881, BSEN 12390 Annex A or B, EN-196-1, ASTM E4, BS 4550, ASTM C-109

Features

These automatic compression test machine with control console unit are designed to test the concrete and cement in one automatic control accordance to the above relevant standard. The 250kN or 300kN cement test frame can be fixed to any of the unit test digital concrete test machine by using the second channel of the same digital readout unit which is supplied as standard.

General Specification

• Specimen to be test 150, 100, 70.7, 50mm and 40mm cube sample and 150mm and 100mm diameter cylinder and 40 x 40 x 160mm prism sample.

• Concrete measurement range from 50 to 2000kN, 2500kN, 3000kN or 4000kN cement measurement range from 2 to 250 or 300kN

• Compression/flexural fig. for testing 40 x 40 x 160mm prism specimen are supplied as optional

• Concrete range: 0-400kN x 0.1kN, 400-2000kN, 2500kN, 3000kN, or 4000kN x 1kN

Features

These twin frame machines test concrete with a DHR (2-channel) digital readout. They feature a servo motor and a variable electronic speed control unit. In corporated with fast piston (ram) approach, system and supplied with standard distance pieces to test 150, 100, 70.7, 50mm and 40mm cube specimen and 40 x 40 x 160mm specimen with optional compression flexural jig.
Standard: B.S. 1881, B.S EN 12390 Annex A or B, B.S EN 196-1, ASTM E-4, B.S 4550 ASTM C-109

Model available:

AD 200/25 EN        Semi-auto Twin frame 2000/250kN concrete/cement Compression Test Machine
The AD 250/25 EN is a semi-automatic twin-frame concrete/cement compression test machine with a capacity of 2500/250 kN.
AD 300/25 EN        Semi-auto Twin frame 3000/250kN concrete/cement Compression Test Machine

General Specification

Concrete range: 0-400 kN x 0.1kN, 400-1500, 2000, 2500, 3000 or 4000kN x 1kN

Cement range: 0-250kN, 300kN x 0.01kN

Measurement range (concrete): From 50 to 1500, 2000, 2500, 3000 or 4000kN

Measurement range (cement): From 2 to 250, 300kN

Features

The CUT 25/10ENT-3 tests cement specimens, including 40x40x160mm prisms, 75mm, 70.7mm, and 50mm cubes, briquettes, and small cores. It offers compression, flexural, and tensile tests, with loading rates and parameters automatically controlled by a computer. The computer can directly print the test results. This machine complies with BS EN 196-1, BS 4550, ASTM C109, ASTM C190, ASTM C307 standards, and BS EN 12390-4:2000 Class 1.0 calibration, providing a convenient and multi-purpose solution.

General Specification

Fully automatic computer control operation
Calibration accuracy to BS EN 12390-4 Class 1.0, ASTM E4 and ISO 376
Large computer display screen with XY graph for real time load (kN) versus time (sec) display.
Conform to BS EN 196-1, BS 4550, ASTM C109, ASTM C 190 and ASTM C307
Compression Range: 0-250kN x 0.01kN
Compression measurement range from: 2 to 250kN x 0.01kN per increment
Flexural / tensile measurement range from: 0.5kN to 10kN x 0.001kN per increment
Acceptable test specimens: 40 x 40 x 160mm prism, 75mm, 70.7mm, 50mm cubes, briquette and small cores.

Standard: BS EN 196-1, BS EN 12390 Annex B, ASTM C 109, BS 4550

Model Available

CUT 25/10EN: 250kN/10kN Computerised Automatic Twin Frame Cement Compression/Flexural Test Machine.

CUT 25/EN: 250kN Computerised Automatic Single Frame Cement Compression Test Machine Automatic.

General Specifications

Standard: BS EN 196-1, BS 4550, ASTM C-109, BS EN 12390 Class 1

ADS 25/10EN AUTOMATED 250/10kN (TWIN FRAME) CEMENT / MORTAR TEST MACHINE EN 196-1

The Automatic Compression / Flexural Machine is designed to test mortar and cement specimens according to EN 196-1 requirements. The loading rate are automatically control by microprocessor technology 250kN is for Compression, 10kN is for Flexural Test.

• Fully Automatic Test with microprocessor control

• Measurement unite kN, lbf selectable

• Calibration Accuracy to EN 12390 Class 1.0, ASTM E4 and also ISO 370

• Meet EN 196-1, BS 3892, ASTM C 109 and BS 4550

• Large Digital Display

• Flexural range: 0-10kN x 0.001kN

• Compression Range: 0-50kN x 0.01kN, 50-250kN x 0.1kN

• Flexural Measurement Range: from 0.5 to 10kN

• Compression Measurement Range: from 2 to 250kN

*ADS 25/EN: automatic 250kn (single frame) cement compression test machine as above specification, but without flexural load frame

Features

EN 1 Compression Jig, EN 196-1

This jig is designed for testing of 40 x 40 x 160mm cement prism after breaking in Flexure and also can be adapted with 50mm platen to test 50mm mortar cement cube specimen. This jig can be fitted to all Unit Test Compression Test Machine

EN 1 Flexural Jig, EN 196-1

The flexural Jig is designed for testing of 40.1 x 40 x 160mm cement prism, the frame are fitted with roller beaters accordance to EN 196-1

AD 25/10EN Semi-Auto 250kN / 10kN Twin Frame (Compression / Flexural)

Cement Compression Test Machine are designed to test compression and bending (flexural) strength of mortar or cement specimen accordance to standard requirement.

The load rate are manually control by electronic Variable Speed by Servo motor pump unit (silent Type) and a load Spacing bar Indicator (kN/s) are display in order to guard the loading rate accurate to the standard.

General Specification

• 250kN Capacity for Compression

• 10kN Capacity for flexural (bending)

• Manually Operated electronic Variable Speed Control (Silent Type)

• Measurement unit, kN, lbf selectable

• Meet EN 196-1, EN 12390 Annex B, 1 Class 1, ASTM C 109

• Large digital display LCD

• Compression Range: 0-50kN x 0.01 kN, 50-250kN x 0.1kN

• Flexural Range: 0-10kN x 0.001kN

• Measurement Range (Compression): from 2 to 250kN

• Measurement Range (Flexural): from 0.5 to 10kN

Specifications:

*AD 25/EN semi-auto single frame cement compression test (press) machine, with DHR large digital display, but without flexural load frame

*UT 250/10EN: Motorised 250kN Twin Gauge Compression Test (press) Machine c/w 2 nos 300mm dia. load gauge 0-250kN x 0.5kN per division and 0-10kN x 0.02kN per division.

*UT 250/ EN: Motorised 250kN Compression Test (press) Machine c/w 300mm dia. load gauge 0-250kN x 0.5kN per division.

Features

DIGITAL READOUT DHR

The DHR digital readout is microprocessor control instrument which is fitted as a standard to all the Unit Test Machines. The load is displayed in kN / lbs /kgf, which can be enlarged 4 times larger in the LCD display for better clear view.

DIGITAL SPECIFICATION

• Dual Range 2 Channel Compression and Flexural Mode 0-400kN x 0.1kN, 400-2000kN x 1kN for Compression Channel, 0-100kN x 0.01kN for Flexural Channel

• Force unit suitable either kN, kgf or lbf

• Sample size selectable

• Cube, or Non Standard Cylinder, Non Standard Cube or Beam Block

• Date, time, sample ref., stress (N/mm₂), test number, sample size, failure load (kN), pace rate can be viewed on the display and also can download to computer or printer by using RS 232 cable on serial port

• Test result can best stored up to 200 before load to computer or printer

• In kN mode reading. 0.1kN increment up to 400kN and 1kN increment up to 1500, 2000, 2500, 3000, 4000, or 5000kN

• Large 125 x 75mm screen LCD Display

• Pace rate selection from 0.1 to 5kN/S

• Calibration through pass code

• Maximum load hold and reset auto calculation in N/mm₂ (Mpa);p.s.i or kg/cm²

• Accuracy: Better than +1% over the calibrated range

AD 150/EL, AD 2000/EL, AD250/EL DHR Digital Readout Machine (4 column or Slab Frame)

These machines are designed to allow testing of cylinder up to 320mm long x 160mm diameter and cube 150, 100mm square specimen. The mortar Cube (ASTM C109) 50mm also can be tested by using optional Compression Jig attachment fitted to all range of Unit Test’s Compression Test Machine.

GENERAL SPECIFICATION

Features

1. The Unit Test Digital Readout Compression Test Machine has a similar feature as the gauges model UT version.

The different is that it has a DHR 2000 digital readout head that could connected on to  computer or serial printer with a RS 232 cable for result print out or computer storage in database optionally. The DHR digital readout could also be fixed to any of our range of testing machine, including the flexural test machine.

The integral digital load pacer with a visual error brand Display enables the operator to maintain an accurate loading rate on the specimen. Optional Cement / Mortar Testing Frame 250kN or Flexural Test Frame 100kN Capacity can be fixed to all the AD or ADS digital readout Compression Test Machine by using second channel of the digital readout. All machine supplied with standard distance piece up to test 15cm cube.

2. Motorised Hydraulic Power Pack with Rapid Approach Pump

There are two type of hydraulic power pack either mechanical lever control type or semi-auto electronic servo motor type (silent type) same as automatic version pump unit. All the power packs are standard fitted with rapid approach pump system to allow test specimen fast contact to the machine’s top platen.

3. Capacity 1500, 2000, 2500, 3000, 4000, 5000kN

• Available in Rigid Welded (slab) or 4 column Frame

• Designed for laboratory use.

• On screen +/- display for loading rate and setting all the specimen requirement in the test.

• Password protected keypad for Calibration.

• Port for computer or printer.

• Machine Frame standard B.S. EN 12390 Annex A – Force Transfer Optional

• Calibration accuracy to B.S. EN 12390 Class 1, ASTM E4, AS 2193 Grade A

• Silent efficient semi-automatic power pack or level control type

• Suitable for main laboratory or central laboratory use

Model Availablef

• F/300 Unit Test 300kN digital Hydraulic Bending (Flexural) Test machine with DHR 2000 digital readout.

• F/600 Unit Test 600kN digital Hydraulic Bending (Flexural) Test machine with DHR 2000 digital readout.

• A/300 Unit Test 300kN Automatic digital Hydraulic Bending (Flexural) Test machine with Autocon 2000 digital readout.

• A/600 Unit Test 600kN Automatic digital Hydraulic Bending (Flexural) Test machine with Autocon 2000 digital readout.

• T/300 Unit Test 300kN Motorised Hydraulic Bending (Flexural) Test machine with 2nos 300mm dia. Load gauge 10-100 x 0.2kN and 30-300kN x 1kN.

• T/600 Unit Test 600kN Motorised Hydraulic Bending (Flexural) Test machine with c/w 2 no 300mm dia. Load gauge 10-100 x 0.2kN and 60-600kN x 2kN.

Features

• Lower bearer can be adjustable from 200 to 750mm separation.

• Maximum specimen 200 x 550 x 800mm (H x W x L)

• Maximum vertical clearance from upper bearer to lower bearer 210mm

• Ram travel 150mm

• Stable fabrication frame ensure rigidity during testing

• Test on flagstone, kerbs and beam up to 200mm square section can be test.

• Hydraulic pressure supplied by either power pack or from a digital Compression Test Machine power pack

• Upper bearer can be adjustable single or double point loading

• Standard BS 1881, ASTM

Automatic flexural test machine 100 kN capacity with Autocon 2000 digital readout

Features

UNIT TEST flexural test machines are designed for breaking test of beams, tiles, kerbs and other rectangular or square specimens. Its upper supporting rollers can be easily removed by users for single point or double point loading. The bottom supporting rollers can be easily moved apart for the required distance. When requesting for a quotation, kindly mention types of specimen to be tested and provide us with the test standard so that we can supply the flexural machine with the correct specifications.

• Distance between lower supporting rollers are adjustable from 200 to 750 mm apart
• Maximum specimen size acceptable is 200 x 550 x 800 mm (H xWx L)
• Maximum vertical clearance from upper to lower supporting rollers is 2’10 mm
• Maximum ram travel is 150 mm
• Stable fabrication frame ensure rigidity during testing
• Test on flagstone, kerbs and beams of up to 200 mm square section
• Hydraulic pressure supplied by motorised or automatic power pack
• Upper supporting rollers are removeable for single or double point loading
• Comply to BS EN 12390-5, ASTM C78, ASTM C293

Features

Autocon Digital Console

The automatic console is providing control for the main Compression Frame and the optional Flexural frame. LCD display has an Auto cut off system which provide longer life spend for the display.

All parameters such as pace rate, sample size, time, date, etc. are entered by using the touch sensitive keypad and function key. The calibration and engineering data are protected by pass code an test result can be viewed and stored up to 300 numbers test which can be connected to optional printer or P.C by using RS 232 cable. LCD can be enlarged 4 times larger for better clear view.

Unit Test Autocon is displayed in kN, kgf or lbs and associated in mm or inches unit. The measuring system and hydraulic pump are control by microprocessor and keypad data entry. The auto rapid approach system is provided in the test and load control is based on Servo motor which is more accurate and reliable control of loading rate to the specimen.

The automatic console microprocessor system is provided in the full automatic control system for all the Unit Test Machine on 1000kN, 1200kN, 1500kN, 2000kN, 2500kN, 3000kN, and 4000kN and 5000kN capacity.

Fully Automatic Autocon Digital Specifications

1) 5 stage fine time test

2) 3 channel digital readout:

Compression mode

• Low range 0-400 x 0.1kN

• High range 400-2000, 2500, 3000 x 1kN

   High range 400-4000, 5000 x 1kN

Flexural mode

• Flexural range 0-100 x 0.01kN or 0-250kN x 0.01kN

3) Displays calculated density (kg/m)

4) Large graphics LCD Display Screen: 100mm x 150mm in kN units

5) Calibrated through keypads (password protected)

6) Pace rate setting facility from 0.1 to 15.0kN per sec.

7) Digital pace rate indicator for manual control

8) Real time clock and calendar

9) Specimen test number with automatic increment

10) Automated close control of the selected pace rate

11) -x-y Graphic display Force against Time (s)

      -x-y Graphic display Force against deformation (optional) for elastic modulus test

12) Part for hook up to computer and printer

13) Screen display failure load (kN) and stress (Mpa) in engineering units, test number, pace rate (kN/s), Specimen size (mm), date and time

14) Automatic closure daylight, zeroing and taring during pretest platen movement.

15) Rapid throughout of concrete test

16) Complete test can be carried out from the push of a button.

17) Manual over-ride for the operator control

18) Test result can be viewed, stored up to 300 test before requiring downloading to computer

19) Print out result

20) Selection of sample type and size

21) Metric (kN) or imperial (lbs)  and (kgf) selection

22) Auto release when sample failure

23) Power: 240V, 50Hz, 1pH

Features

These types of test machine are specially designed for site and Lab. Application for testing 15 cubes or 30cm x 15cm dia. cylinder specimen.

The main features are light weight, compact, rigid and easy to move and handle.

The machines are built-in with fast approach pumps system and fine load speed control level knob.

• Available in 1500, 2000, 2500 and 3000kN Single or Twin Gauge
• Also available in rigid welded frame and 4 column frame
• Specifically designed for easy mobility
• Simple operation to minimize running cost
• Precise spherical cap for optimum results
• Motorised hydraulic power pack operation with Ram rapid approach system
• Single/Twin load gauge 300mm diameter with maximum red pointer.
• Accuracy within +/- 1% error
• Meet standard of BS EN 12390 Annex A, BS 1881-115A, AS1012. (Optional)
• Calibration accuracy to BS EN 12390 Class 1.0, ASTM E4, AS2193 Grade A