JIS symbol

External Dimensions

Specifications

Coil data

Model Code

Operation

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.

JIS symbol

External Dimensions

Specifications

Coil data

Model Code

Operation

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.

JIS symbol

External Dimensions

Specifications

Coil data

Model Code

Operation

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.

Specification

Coil data

Model Code

External Dimensions

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.

MVW6D dual valve is a solenoid valve to operate the pneumatic clutch and brake for the press machine, in which a construction satisfying article-29 of Power Press Machine Structural
Standard has been adopted by regulations in Article 42 of the Labor Law of Industrial Safety and Health.
The valve is that of “parallel flow type” combining two units of normally open type and three port solenoid, which is a poppet seal construction of excellent durability

JIS symbol

For MVW6D dual valves, even if one of dual valves malfunctions, the other valve operates to exhaust air. The exhaust pressure (residual pressure) at this
time is as follows: 0.05MPa or less in case of supply pressure : 0.5MPa

External Dimensions

Specifications

Coil data

Model Code

Operation

• Kouei is Distributor/Agent of KONAN.
• Other items of KONAN.
• Request the quotation for KONAN.

Manufacturer: KURIMOTO

Model: RE-30

Features

Valve size 100 – 300mm (4″ – 12″)

As soon as the hydraulic pressure in the water main connected to a tank abnormally lowers due to the damage by disaster such as an earthquake and other trouble, the valve detects the pressure difference and shuts off water supply to the tank to change water flow and keep clean water in the tank.

Manufacturer: KURIMOTO

Model: BT-SH

Features

Valve size 300 – 2000mm (12″ – 80″)

It has a spherical disc and is used as turbine inlet valve of Hydro power station.
It is used for high head.

Manufacturer: KURIMOTO

Features

Valve size 400 – 1500mm (16″ – 60″)

When such an emergency should arise as an earthquake or earth-avalanche damaging pipelines or their deterioration in use, Kurimoto’s emergency shut-off valve would not only automatically, safely and quickly shut off the affected pipeline, thereby securing the valuable water supply, but preclude the secondary disaster from effluent.
The emergency shut-off valve comprises a valve body, locking device, self-closing device(weight), hydraulic shock absorber, actuator etc., and the valve body is fabricated in conformity with JIS-B-2064 Butterfly valve for water service. It has a valve closing system including a line abnomality detector, also provided with a control panel incorporating the system operation check function for normal operation.

Manufacturer: KURIMOTO

Model: AR-M1

Features

Valve size 75mm (3″)

This valve is installed on a pipeline to the purpose of air exhaust and suction.

Manufacturer: KURIMOTO

Model: BT

Features

Valve size 150 – 4000mm (6″ – 160″)

For many purposes,standard type,eccentric type,steady flow type,disc removal type,emergency shut-off type and so on.

Manufacturer: KURIMOTO

Model: SL-G

Features

Valve size 200 – 1900mm (8″ – 75″)

This is a sub-valve for waterutilization and discharge facilities of dam and is used for inspecting and repairing the main valve.

Manufacturer: KURIMOTO

Model: M-611

Features

M-611 Valve size 50 – 200mm (2″ – 8″)

This valve is a flangeless wafer type which is made entrirely of stainless steel.It is light and compact. It is a double structure.Furthermore,no coating for preventing rust is required

Manufacturer: KURIMOTO

Model: RA Series

Features

Valve size 50 – 1000mm (2″ – 40″)

This valve is operated by the water pressure of pipe line in which it installs.
No other power source is raquired.
It is designed to start repidly off to close at first stage, and to operate slower and slower to full close position, so that no water hammer occurs.
The valve is so reliable as maintenanoe free for a long time.
Available for wide range and many purposes.

Manufacturer: KURIMOTO

Model: FT-10

Features

Valve size 100 – 2400mm (4″ – 96″)

Under high pressure operating conditions,flow and pressure with ordinary valves generate vibration and noise due to cavitation. this can seriously damage both valve & piping.
With kurimoto’s Flotus you have a heavy duty compact control valve consisting of two disc with multiple orifices. Flotus control valves use the basic principle of the tapered inlet orifice. During operation there are even distributed jets of water which can be used to control flow and pressure.
The precise machining and exceptional smoothness of the opening act to suppress the affects of cavitation, such as noise vibration and line turbulence.

Manufacturer: KURIMOTO

Features

Valve size 400 – 3000mm (16″ – 120″)

This is used for circulating cooling water pipe line of power plant.

Manufacturer: KURIMOTO

Model: M-651& M-671

Features

Valve size 50 – 300mm (2″ – 12″)

The main parts made of stainless cast steel have good heat insulation and corrosion resistance and furthermore displaying an excellent sealing performance under a high pressure of 1.6MPa and 2MPa.

Manufacturer: KURIMOTO

Features

This valve is located in the bustle pipe of a blast furnace to blow off counter-flow gas to the atmosphere from the blast furnace when the furnace is at a stop.
The body and the disc are both made of cast steel for high temperature and constructed so as to be water-cooled, because the blast furnace gas of a high temperature flows through the valve.
The body is refractory-lined in its upsteam side interior to protect it from a high temperature.
Particular catalog is available.

Manufacturer: KURIMOTO

Model: SD-10

Features

Valve size 50 – 300mm (2″ – 12″)

The slider valve is “a light-weight and compact” water level-adjusting valve installed in a water tank,which eliminates such defects that water level-adjusting valve such as a globe valve type conventionally have been used,is “complicated in the structure,anxious in jamming of foreign materials,and further large in the whole dimensions”.
The slider valve is basically constituted of three parts of a valve case,a body unit such as valve dody,and a lever and a float.

Manufacturer: KURIMOTO

Features

Available with a closed type and an open type.
The movable seal ring is pressure-released or re-pressed by means of the springed oil thdraulic cylinder.

Manufacturer: KURIMOTO

Features

This is a butterfly type valve in which the valve disc moves almost in parallel with the seat surface near its fully closed position and rotates through 90 degrees when fully opened.

Manufacturer: KURIMOTO

Model: P-SLV

Features

Valve size 200 – 2000mm (8″ – 80″)

Straight inline type
Submerged discharge type
Angle inline type

Sleeve valves are provided with
1) A straight inline type,
2) A submerged discharge type,
3) An angle inline type.
Operating principle is based on throttling pressure across multiple openings especially sized, tapered, and positioned around a circular valve port.
The valve opening characteristics are normally linear throughout the valve stroke but can be characterized for special applications if required.
Control of the valve may be manual, motor operated, or hydraulically actuated with incoming fluid or oil used as the control medium.

Manufacturer: KURIMOTO

Features

Valve size 700 – 1900mm (28″ – 75″)

This valve is of water-cooled construction to pass and shut off a hot blast of 1000 – 1400°C,and has a refractory lining to the interior of its body.

Manufacturer: KURIMOTO

Features

Valve size 200 – 4000mm (8″ – 160″)

For many purposes,standard type,eccentric type,steady flow type,disc removal type,emergency shutt-off type and so on.

Manufacturer: KURIMOTO

Model: M-620

Features

M-620 Valve size 250,300mm (10″ and 12″)

This valve is a flangeless wafer type which is made entrirely of stainless steel.It is light and compact. It is a double structure.Furthermore,no coating for preventing rust is required

Manufacturer: KURIMOTO

Model: SE-1/SF-1

Features

Valve size 50-500mm(2″-20″)

The smooth unobstructed waterway, it provides minimum head loss through the valve.
There are no pockets to collect debris.
When compressed to a drop-tight shut-off, this valve is designed all compression – no wedging or sliding, so that no sliding or shear on the resilient seating surface would cause seat failure and leakage.
It has a protective coating of fusionbouded epoxy resin inside and outside, therefore, corrosion protection of all ferrous surfaces is maximized.