Overview

Used for various jobs, at various sites

How to use

For VK-10:

Obtain 3 metal pipes (for legs or for gas pipe) of 48.6mm diameter and approximately 3mm thick.

Insert the pipes into the joints and firmly tighten the bolts.

Keep the pipes upright and firmly tie the legs together with ropes between them.

For VK-20:

Get 3 wood poles or metal pipes (approximately 4mm thick).

Insert the tips of the pipes so they hit the joint backs and firmly tighten using U bolts.

After completing steps 1 and 2, decide the position of legs and stand up the structure.

Firmly tie the legs together with rope between them.

Example

Leg data

Specifications

Precautions during use

Features

• Can be adjusted to 9 types of rail widths.
• Extremely easy work-site installation.
• Uses high-quality sealed ball bearings.
• Compatible with I-beam and H-beam rails.
• Easily travels over minor rail surface irregularities.

Great for laterally transporting freight!

Specifications

Adjusting the Trolley for the Rail Size

Measure the rail width. Locate the rail width in the row corresponding to the trolley size to find the washer combination category (A to I) for
that trolley size. Then refer to the illustration corresponding to the washer combination category for the number of washers and washer
placement needed to adjust the trolley size. (See the separate table for 10-ton trolleys.)

Structure

Vital chain block VP5 series

Specifications

Vital chain block VL5 series

Specifications

Structure

Vital chain block VP5 series

Specifications

Load Chain : With special alloy load chain.

Structure

Instructions for use

1.Depress the retaining pawl all the way down and pull the grip ring towards you.
2.The chain can be adjusted up and down by hand.
3.To terminate the idling, set the change lever in the down( )position.(See diagram below).
Then, depressing the retaining pawl as far as possible, push the grip ring gently so as to let the pawl engage the outer edge of the retaining plate.
Next, grip the grip ring and handle with a single hand and push them while turning them counterclockwise.
The retaining pawl returns to its original position.

Specifications

Hoists with the life in other lengths are also available.

・Please note that the specifications on this leaflet may be modified for improvements without notice.

Structure

Overview

• Loading a truck, centering building material at a construction site.
• Setting up or moving machinery and other heavy objects.
• Laying down drain pipes and hume pipes.
• Working in narrow spaces as in shipyards and mines.

Features

• Automatic switching to free pulley mode.
• Easy maintenance.
• Plated chain.
• Locked chain release mechanism.
• Knobbed hook.

Specifications

Structure

Overview

• All Vital Nice Levers use optimum,high quality material for the chain, hook, press and other sections, and are manufactured using the lates processing technologies.
• We carefully check each and every product before shipping.

Feature

1.Automatic Free Pulley Snapback.
2.Completely Sealed Break Unit.
3.The Switching Unit Is Sealed inside the Lever Section.
4.Steel Plates on the Chain Ends.
The chain ends have symmetrical pear-shaped steel plates that resist bending even when overloaded, preventing dangerous chain slippage.
5.Sealed Body.
6.Easy Catch Hook.

Specifications

Structure