Fukuda Seiko | KOUEI | Nhận báo giá

Fukuda Seiko TRD Khuôn Cắt- Trimming Dies

Fukuda Seiko EMCS Mũi Siêu Khoan Trục Ngắn – Super Drill Stub

Fukuda Seiko EMCR Mũi Siêu Khoan Thông Thường EMC – EMC Super Drill Regular

Fukuda Seiko SLD Mũi Khoan Chuôi Trụ Cho Mâm Cặp Mũi Khoan Cacbua – Straight Shank Drill for Carbide Drill Chuck

Fukuda Seiko STD Mũi Khoan Chuôi Côn Lưỡi Vonfam Cacbua – Tungsten Carbide Taper Shank Drills

Fukuda Seiko TD Mũi Khoan Chuôi Côn Lưỡi Vonfram Cacbua – Taper Shank Drill With Tungsten Carbide Blade

Fukuda Seiko SSD Mũi Khoan Cacbua Rắn Chuôi Trụ – Solid Carbide Tip Straight Shank Drill

Fukuda Seiko SD Mũi Khoan Chuôi Trụ Lưỡi Cacbua – Carbide Blade Straight Shank Drill

Fukuda Seiko SHM Mũi Khoan Chuôi Trụ 3S Loại H – 3S Straight Shank Drill H Type

Fukuda Seiko SSM Mũi Khoan Chuôi Trụ 3S Loại S – 3S Straight Shank Drill S Type

Fukuda Seiko SRM Mũi Khoan Chuôi Trụ 3S Loại R – 3S Straight Shank Drill R Type

Fukuda Seiko CR-MT Mũi Doa Tâm (Chuôi Côn) – Center Reamer (Taper Shank)

Fukuda Seiko CR Mũi Doa Tâm – Center Reamer

Fukuda Seiko MR Mũi Doa Máy – Machine Reamer

Fukuda Seiko WAC Dao Cắt Góc Đôi – Double Angle Cutter

Fukuda Seiko AC-LH Dao Phay Góc Đơn (Lưỡi Bên Trái) – Single Angle Cutter (Left Blade)

Fukuda Seiko AC-RH Dao Phay Góc Đơn (Lưỡi Bên Phải) – Single Angle Cutter (Right Blade)

Fukuda Seiko SSC Dao Cắt Cạnh Lưỡi So Le – Staggered-blade Side Cutter

Fukuda Seiko SC Dao Cắt Cạnh Lưỡi Tiêu Chuẩn – Standard Blade Side Cutter

Fukuda Seiko 3C Dao Cắt Lỗ Đối Diện Gắn Trên Bề Mặt Cho Bulông Lục Giác MC) – 3C Mill (Surface Mounting Counterbore Cutter For Hexagon Socket Bolt MC)

Fukuda Seiko DSS Dao Phay Chìm Cho Bulông Đầu Chìm Có Mũi Khoan – Submerged Milling Cutter For Countersunk Head Screws With Drill

Fukuda Seiko DCS Dao Phay Chìm Cho Bulông Đầu Chìm Có Mũi Khoan – Submerged Milling Cutter For Countersunk Head Screws With Drill

Fukuda Seiko DCB Dao Phay Chìm Có Khoan (Đối Với Bulông Lục Giác) – Submerged Milling Cutter With Drill (For Hexagon Socket Head Bolts)

Fukuda Seiko MS-CB Dao Phay Chìm Cho Bulông Đầu Chìm – Submerged Milling Cutter For Small Countersunk Screws

Fukuda Seiko EP-CB Dao Phay Chìm Cho Chốt Ép Đùn – Submerged Milling Cutter For Extruded Pins

Fukuda Seiko LS-CB Dao Phay Chìm Chuôi Dài (Tiêu Chuẩn JIS) – Long Shank Submerged Milling Cutter (JIS Standard)

Fukuda Seiko CBT Dao Phay Chìm (Đối Với Bu Lông Đầu Lục Giác) Chuôi Côn – Submerged Milling Cutter (For Hexagon Socket Head Bolts) Taper Shank

Fukuda Seiko CB Dao Phay Chìm (Đối Với Bu Lông Đầu Lục Giác) – Submerged Milling Cutter (For Hexagon Socket Head Bolts)

Fukuda Seiko CC Dao Phay Vát Mép Không Phát Ra Tiếng Ồn – Chatterless Chamfering Milling cutter

Fukuda Seiko SPC Dao Cắt Dạng Ô Có Tay Cầm – Umbrella-Shaped Cutter With Handle

Fukuda Seiko SWC Dao Cắt Góc W Có Tay Cầm – W Angle Cutter With Handle

Fukuda Seiko SAC Dao Cắt Góc Có Tay Cầm – Angle Cutter With Handle

Fukuda Seiko TSE Dao Phay Rãnh Chữ T – T-slot End Mill

Fukuda Seiko LS-STC Dao Cắt Rãnh Chữ T Lưỡi So Le Chuôi Dài – Long Shank Staggered Blade T-Slot Cutter

Fukuda Seiko STC Dao Cắt Rãnh Chữ T Lưỡi So Le – Staggered Blade T-Slot Cutter

Fukuda Seiko LS-TC Dao Cắt Rãnh Chữ T Chuôi Dài – Long Shank T-Slot Cutter

Fukuda Seiko TC Dao Cắt Rãnh Chữ T Lưỡi Thông Thường – Regular Blade T-slot Cutter

Fukuda Seiko KCST Dao Cắt Rãnh Với Lưỡi Bên – Side Blade Key Sheet Cutter

Fukuda Seiko KC Dao Cắt Rãnh – Key Sheet Cutter

Fukuda Seiko SL-BS-L Dao Phay Rãnh Dài, 2 Me – Long Slotting End Mill, 2-Flute (BS Shank)

Fukuda Seiko SL-MT Dao Phay Rãnh, 2 Me – Slotting End Mill, 2-Flute (MT shank)

Fukuda Seiko SL-BS Dao Phay Rãnh, 2 Me – Slotting End Mill, 2-Flute (BS shank)

Mô tả

Thông số và bản vẽ kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

Mô tả

Bản vẽ kỹ thuật

Thông số kỹ thuật

kvtpart — Mon, 20 Apr 2020 04:48:02 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: TRD

Hình vuông, hình tròn và hình bầu dục cũng có sẵn.. Số lượng sản xuất tối thiểu là 10 cái.
Chất liệu: SKH55
(Khuôn cắt)
(Mũi khuôn)

■ Trimming dies

Model number	Bolt size	Outer diameter (φD)	Thickness (L)	Opposite side dimension (flat diameter) (H)	CVD
1S	M6	30	19	9.8	TiC or CNO5
2S	M8	35	23	12.75
3S	M10	42	23	16.75
4S	M12	45	28	18.65
5S	M14			21.65
6S	M16			23.65
7S	M16	60	40	23.65
8S	M18			26.65
9S	M20			29.65
10S	M22			31.6
11S	M22	70	50	31.6
12S	M24	70	50	35.6

■ Nib dice

Model number	Bolt size	Outer diameter (φD)	Thickness (L)	Opposite side dimension (flat diameter) (H)	CVD
1N-16	M16	42	15	23.65	TiC or CNO5
1N-18	M18			26.65
2N-20	M20	45		29.65
2N-22	M22			31.6
3N-22		56	20
3N-24	M24			35.6

■ Nib case

Model number	Outer diameter (φD)	Thickness (L)	Seat diameter (φd)	Nib die model number	Bolt size
1C	60	34	42	1N-16,18	M16, M18
2C	60	35	45	2N-20,22	M20, M22
3C	70	45	56	3N-22,24	M22, M24

■Inset-type trimming dies

Model number	Combination nib dies	Case	Bolt size	Opposite side dimension (flat diameter) (H)	CVD
1 AST	1N-16	1C	M16	23.65	TiC or CNO5
2AST	1N-18	1C	M18	26.65
3AST	2N-20	2C	M20	29.65
4AST	2N-22	2C	M22	31.6
5AST	3N-22	3C	M22	31.6
6AST	3N-24	3C	M24	35.6

The post Fukuda Seiko TRD Khuôn Cắt- Trimming Dies first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 04:33:23 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: EMCS

Sử dụng HSS dạng bột Co8%, mũi khoan này có độ tin cậy cao với chuôi dao phay ngón cứng không bị sứt mẻ và gãy trong các điều kiện cắt tương tự như điều kiện cắt của mũi khoan cacbua, với hiệu suất cao, tuổi thọ cao và độ chính xác cao.
Chất liệu: Co8% bột thép tốc độ cao
Dung sai đường kính lưỡi dao:

( D ≤ 3) 0 đến -0,01
(3 < D ≤ 6) 0 đến -0,012
(6 < D ≤ 10) 0 đến -0,015
(10 < D ≤ 18) 0 đến -0,018
(18 < D ≤ 20) 0 ~-0,021

Góc chì: Xoay phải 30°

■ EMC Super Drill Stub (Blade diameter 2 to 8.5)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
2.0	12	44	3
2.1
2.2	13	45
2.3
2.4	14	46
2.5
2.6
2.7	16	48
2.8
2.9
3.0
3.1	18	50	4
3.2
3.3
3.4	20	52
3.5
3.6
3.7
3.8	22	54
3.9
4.0
4.1		66	6

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
4.2	22	66	6
4.3	24	68
4.4
4.5
4.6
4.7
4.8	26	70
4.9
5.0
5.1
5.2
5.3
5.4	28	72
5.5
5.6
5.7
5.8
5.9
6.0
6.1	31	75	8
6.2
6.3

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
6.4	31	75	8
6.5
6.6
6.7
6.8	34	78
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6	37	81
7.7
7.8
7.9
8.0
8.1		87	10
8.2
8.3
8.4
8.5

■ EMC Super Drill Stub (Blade diameter 8.6 to 20.0)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
8.6	40	90	10
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6	43	93
9.7
9.8
9.9
10.0
10.1		100	12
10.2
10.3
10.4
10.5
10.6
10.7	47	104

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
10.8	47	104	12
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0	51	108
12.1
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
13.0	51	108	12
13.5	54	114	16
14.0
14.5	56	116
15.0
15.5	58	118
16.0
16.5	60	125	20
17.0
17.5	62	127
18.0
18.5	64	129
19.0
19.5	66	131
20.0

The post Fukuda Seiko EMCS Mũi Siêu Khoan Trục Ngắn – Super Drill Stub first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 04:23:35 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: EMCR

Sử dụng HSS dạng bột Co8%, mũi khoan này có độ tin cậy cao với chuôi dao phay ngón cứng không bị sứt mẻ và gãy trong các điều kiện cắt tương tự như điều kiện cắt của mũi khoan cacbua, với hiệu suất cao, tuổi thọ cao và độ chính xác cao.
Chất liệu: Co8% bột thép tốc độ cao
Dung sai đường kính lưỡi dao:

( D ≤ 3) 0 đến -0,01
(3 < D ≤ 6) 0 đến -0,012
(6 < D ≤ 10) 0 đến -0,015
(10 < D ≤ 18) 0 đến -0,018
(18 < D ≤ 20) 0 ~-0,021

Góc nghiêng me: Xoay phải 30°

■EMC Super Drill Regular (Blade diameter 2 to 8.5)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
2.0	24	56	3
2.1
2.2	25
2.3
2.4	30	61
2.5
2.6
2.7	33	64
2.8
2.9
3.0
3.1	36	68	4
3.2
3.3
3.4	39	71
3.5
3.6
3.7
3.8	43	75
3.9
4.0
4.1		85	6

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
4.2	43	85	6
4.3	47	89
4.4
4.5
4.6
4.7
4.8	52	94
4.9
5.0
5.1
5.2
5.3
5.4	57	99
5.5
5.6
5.7
5.8
5.9
6.0
6.1	63	107	8
6.2
6.3

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
6.4	63	107	8
6.5
6.6
6.7
6.8	69	113
6.9
7.0
7.1
7.2
7.3
7.4
7.5
7.6	75	119
7.7
7.8
7.9
8.0
8.1		125	10
8.2
8.3
8.4
8.5

■EMC Super Drill Regular (Blade diameter 8.6 to 20.0)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
8.6	81	131	10
8.7
8.8
8.9
9.0
9.1
9.2
9.3
9.4
9.5
9.6	87	137
9.7
9.8
9.9
10.0
10.1		144	12
10.2
10.3
10.4
10.5
10.6
10.7	94	151

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
10.8	94	151	12
10.9
11.0
11.1
11.2
11.3
11.4
11.5
11.6
11.7
11.8
11.9
12.0
12.1	101	158
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (φd)
13.0	101	158	12
13.5	105	165	16
14.0
14.5	110	170
15.0
15.5	115	175
16.0
16.5		180	20
17.0
17.5	120	185
18.0
18.5	125	190
19.0
19.5
20.0

The post Fukuda Seiko EMCR Mũi Siêu Khoan Thông Thường EMC – EMC Super Drill Regular first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 04:15:26 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SLD

Lưỡi cắt sử dụng loại lưỡi cắt cacbua (G2) cho tuổi thọ cao. Chiều dài lưỡi, chiều dài chuôi và chiều dài tổng thể đều được tiêu chuẩn hóa, giúp giảm thời gian và công sức cần thiết khi thay đổi kích thước mũi khoan.
Chất liệu: G2 (loại hàn)
Dung sai đường kính lưỡi dao: 0 đến -0,03
Góc nghiêng me: Xoay phải 20°

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank diameter (φd)
14	70	150	12
14.5
15
15.5
16
16.5
17			16
17.5
18
18.5
19
19.5
20

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank diameter (φd)
20.5	70	150	16
21			20
21.5
22
22.5
23
23.5
24
24.5
25
25.5
26

The post Fukuda Seiko SLD Mũi Khoan Chuôi Trụ Cho Mâm Cặp Mũi Khoan Cacbua – Straight Shank Drill for Carbide Drill Chuck first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 04:08:46 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: STD

Mũi cacbua hàn phù hợp nhất để khoan hợp kim nhôm, gang, v.v.
Chất liệu: G2 (loại hàn)
Dung sai đường kính lưỡi dao:

(D≤10,5) 0 đến -0,022
(10,5 (18,5

Góc dẫn: Xoắn phải 28ﾟ～30ﾟ
Vát mỏng: ×

Blade diameter (φD)	Groove length (𝓵)	Chip length (𝓵1)	Overall length (L)	Shank (MT)
6	75	25	150	MT1
6.5
7
7.5
8	85	27	170
8.5
9
9.5
10	100	30	185
10.5
11
11.5
12	115	32	200
12.5
13
13.5
14
14.5	125	34	225	MT2
15
15.5
16

Blade diameter (φD)	Groove length (𝓵)	Chip length (𝓵1)	Overall length (L)	Shank (MT)
16.5	145	35	240	MT2
17
17.5
18
18.5	150	37	250
19
19.5
20
20.5
21
21.5	160	39	265
22
22.5
23
23.5	165	44	285	MT3
24
24.5
25

The post Fukuda Seiko STD Mũi Khoan Chuôi Côn Lưỡi Vonfam Cacbua – Tungsten Carbide Taper Shank Drills first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 03:56:38 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: TD

Loại hàn tiết kiệm. Mũi khoan gang và kim loại màu với các tính năng cacbua xi măng rất tốt và chu kỳ mài lại rộng duy trì hiệu quả kinh tế cao.
Chất liệu: G2 (loại hàn)
Dung sai đường kính lưỡi dao:

(D≤18) 0 đến -0,03
(18 (29

Góc nghiêng me: Xoay phải 20°

■ Carbide tip taper shank drill (blade diameter 6 to 15.7)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
6	30	110	MT1
6.5	40	120
7
7.5
8
8.5	50	130
9	50	130
9.5	60	140
10	60	140
10.1	70	150
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
11
11.1
11.2
11.3

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
11.4	70	150	MT1
11.5
11.6
11.7
11.8
11.9
12
12.1	80	160
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9
13
13.1
13.2
13.3
13.4
13.5

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
13.6	80	160	MT1
13.7
13.8
13.9
14
14.1	100	200	MT2
14.2
14.3
14.4
14.5
14.6
14.7
14.8
14.9
15
15.1
15.2
15.3
15.4
15.5
15.6
15.7

■ Carbide tip taper shank drill (blade diameter 15.8 to 22.3)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
15.8	100	200	MT2
15.9
16
16.1
16.2
16.3
16.4
16.5
16.6
16.7
16.8
16.9
17
17.1
17.2
17.3
17.4
17.5
17.6
17.7
17.8
17.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
18	100	200	MT2
18.1	110	210
18.2
18.3
18.4
18.5
18.6
18.7
18.8
18.9
19
19.1
19.2
19.3
19.4
19.5
19.6
19.7
19.8
19.9
20
20.1

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
20.2	110	210	MT2
20.3
20.4
20.5
20.6
20.7
20.8
20.9
21
21.1	120	220
21.2
21.3
21.4
21.5
21.6
21.7
21.8
21.9
22
22.1
22.2
22.3

■ Carbide tip taper shank drill (blade diameter 22.4 to 28.9)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
22.4	120	220	MT2
22.5
22.6
22.7
22.8
22.9
23
23.1	130	250	MT3
23.2
23.3
23.4
23.5
23.6
23.7
23.8
23.9
24
24.1	140	260
24.2
24.3
24.4
24.5

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
24.6	140	260	MT3
24.7
24.8
24.9
25
25.1
25.2
25.3
25.4
25.5
25.6
25.7
25.8
25.9
26
26.1
26.2
26.3
26.4
26.5
26.6
26.7

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
26.8	140	260	MT3
26.9
27
27.1
27.2
27.3
27.4
27.5
27.6
27.7
27.8
27.9
28
28.1
28.2
28.3
28.4
28.5
28.6
28.7
28.8
28.9

■ Carbide tip taper shank drill (blade diameter 29 to 60)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
29	140	260	MT3
29.1	150	270
29.2
29.3
29.4
29.5
29.6
29.7
29.8
29.9
30
30.1
30.2
30.3
30.4
30.5
30.6
30.7
30.8
30.9
31

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
31.5	150	270	MT3
32	150	270	MT3
32.5	180	330	MT4
33
33.5
34
34.5
35
35.5	190	340
36
36.5
37
37.5
38
38.5
39
39.5
40
40.5	200	350
41	200	350

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)	Shank (MT)
41.5	200	350	MT4
42
42.5
43
43.5
44
44.5
45
45.5	210	360
46
46.5
47
47.5
48
48.5
49
49.5
50
55		399	MT5
60	222	412	MT5

The post Fukuda Seiko TD Mũi Khoan Chuôi Côn Lưỡi Vonfram Cacbua – Taper Shank Drill With Tungsten Carbide Blade first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 03:26:16 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SSD

Mũi cacbua hàn phù hợp nhất để khoan hợp kim nhôm, gang, v.v.
Chất liệu: G2 (loại hàn)
Dung sai đường kính lưỡi dao:

(D≤10,5) 0 đến -0,022
(10,5 (18,5

Góc dẫn: Xoắn phải 28ﾟ～30ﾟ
Vát mỏng: ×

Blade diameter (φD)	Groove length (𝓵)	Chip length (𝓵1)	Overall length (L)	Shank diameter (φd)
6	60	25	115	8
6.5
7
7.5
8	65	27	130
8.5				10
9
9.5
10	70	30	140
10.5
11				12
11.5
12	75	32	150
12.5
13
13.5
14
14.5	80	34	160	16
15
15.5
16

Blade diameter (φD)	Groove length (𝓵)	Chip length (𝓵1)	Overall length (L)	Shank diameter (φd)
16.5	100	35	180	16
17
17.5
18				20
18.5	120	37	200
19
19.5
20
20.5
21
21.5	140	39	220
22
22.5				25
23
23.5	160	44	240
24
24.5
25

The post Fukuda Seiko SSD Mũi Khoan Cacbua Rắn Chuôi Trụ – Solid Carbide Tip Straight Shank Drill first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 03:15:43 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SD

Loại hàn tiết kiệm. Mũi khoan gang và kim loại màu với các tính năng cacbua xi măng rất tốt và chu kỳ mài lại rộng rãi duy trì hiệu quả kinh tế cao. Chuôi dao giống như đường kính lưỡi dao.
Chất liệu: G2 (loại hàn)
Dung sai đường kính lưỡi dao: 0 đến -0,03
Góc chì: Xoay phải 20°
Đường kính thân: cùng đường kính với đường kính lưỡi dao

■ Carbide blade straight shank drill (blade diameter 3 to 8.9)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
3	43	75
3.1
3.2
3.3
3.4
3.5	47	80
3.6
3.7
3.8
3.9
4	55	88
4.1
4.2
4.3
4.4
4.5	57	92
4.6
4.7
4.8
4.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
5	60	95
5.1
5.2
5.3
5.4
5.5	63	100
5.6
5.7
5.8
5.9
6	67	105
6.1
6.2
6.3
6.4
6.5	70	108
6.6
6.7
6.8
6.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
7	75	112
7.1
7.2
7.3
7.4
7.5	77	115
7.6
7.7
7.8
7.9
8	80	118
8.1
8.2
8.3
8.4
8.5	83	122
8.6
8.7
8.8
8.9

■ Carbide blade straight shank drill (blade diameter 9 to 13)

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
9	85	125
9.1
9.2
9.3
9.4
9.5	90	130
9.6
9.7
9.8
9.9
10	95	135
10.1
10.2
10.3
10.4

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
10.5	100	140
10.6
10.7
10.8
10.9
11	103	145
11.1
11.2
11.3
11.4
11.5	105	150
11.6
11.7
11.8
11.9

Blade diameter (φD)	Groove length (𝓵)	Overall length (L)
12	105	155
12.1
12.2
12.3
12.4
12.5
12.6
12.7
12.8
12.9
13

The post Fukuda Seiko SD Mũi Khoan Chuôi Trụ Lưỡi Cacbua – Carbide Blade Straight Shank Drill first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 03:08:14 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SHM

Đối với bu lông phẳng và nhỏ. Sản phẩm này chỉ được xử lý bởi các nhà phân phối được chỉ định. Không sử dụng sản phẩm này nếu có lỗ khoan trước.
Chất liệu: HSSS
Dung sai đường kính: 0 đến -0,04
Góc xoắn đường kính lớn: 34ﾟ～38ﾟ
Dung sai đường kính thân: h8

Call mark	Tip diameter (Dc1)	Second stage diameter (Dc2)	Step length (𝓵1)	Groove length (𝓵)	Overall length (L)	Shank diameter (Ds)
M3	3.4	5.9	13	25	65	6
M4	4.5	7.4	18	35	75	6
M5	5.5	9.4	22	40	85	8
M6	6.6	11	25	45	90	8
M8	9	14.5	28	55	100	12

The post Fukuda Seiko SHM Mũi Khoan Chuôi Trụ 3S Loại H – 3S Straight Shank Drill H Type first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 03:01:29 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SSM

Đối với bu lông chìm nhỏ. Sản phẩm này chỉ được xử lý bởi các nhà phân phối được chỉ định. Không sử dụng sản phẩm này nếu có lỗ ở đáy vít.
Chất liệu: HSSS
Dung sai đường kính: 0 đến -0,04
Góc xoắn đường kính lớn: 34ﾟ～38ﾟ
Dung sai đường kính thân: h8

Call mark	Tip diameter (Dc1)	Second step diameter (Dc2)	Step length (𝓵1)	Groove length (𝓵)	Overall length (L)	Shank diameter (Ds)	List price (excluding tax)
M3	3.4	6.4	13	25	65	6	3,600
M4	4.5	8.4	18	30	70	6	3,900
M5	5.5	10.4	22	35	80	8	4,800
M6	6.6	12.5	25	40	85	10	5,600
M8	9	16.5	28	45	90	12	7,600
M10	11	21	36	50	95		12,700
M12	14	25	39.5	75	120		15,500

The post Fukuda Seiko SSM Mũi Khoan Chuôi Trụ 3S Loại S – 3S Straight Shank Drill S Type first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 02:52:25 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SRM

Đối với bu lông đầu lục giác (bu lông nắp). Sản phẩm này chỉ được xử lý bởi các nhà phân phối được chỉ định. Không sử dụng sản phẩm này nếu có một lỗ ở dưới cùng của bu-lông.
Chất liệu: HSSS
Dung sai đường kính: 0 đến -0,04
Góc xoắn đường kính lớn: 34ﾟ～38ﾟ
Dung sai đường kính thân: h8

■ 3S straight shank drill R type (Order number M3 to M18)

Call mark	Tip diameter (Dc1)	Second step diameter (Dc2)	Step length (𝓵1)	Groove length (𝓵)	Overall length (L)	Shank diameter (Ds)
M3	3.4	6.5	13	25	65	6
M4	4.5	8	18	35	75	6
M5	5.5	9.5	22	40	85	8
M6	6.6	11	25	45	90	8
M8	9	14	28	55	100	12
M10	11	17.5	30	60	110
M12	14	20	32	65	115
M14	16	23	35	75	125
M16	18	26	40	85	135
M18	20	29	45	95	145

■ 3S straight shank drill R type (order code inch size)

Call mark	Tip diameter (Dc1)	Second step diameter (Dc2)	Step length (𝓵1)	Groove length (𝓵)	Overall length (L)	Shank diameter (Ds)
1/4″	6.9	11	25	45	90	8
5/16″	8.9	14	28	55	100	12
3/8″	10.5	15	30	60	110
1/2″	14.7	20	32	65	115
5/8″	17.9	26	40	85	135

The post Fukuda Seiko SRM Mũi Khoan Chuôi Trụ 3S Loại R – 3S Straight Shank Drill R Type first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 02:42:29 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: CR-MT

Dao doa dùng để gia công tinh hoặc vát mép lỗ tâm. Giảm tiếng kêu với số lượng me dao lẻ.
Chất liệu: HSS (SKH51)
Dung sai đường kính lớn: +0,3 đến +0,5
Dung sai góc: ±15′

■ Center reamer (tapered shank) (angle 60°)

Designation (φD×θ)	Large diameter (φD)	Small diameter (φD1)	Cutting edge (𝓵)	Outer diameter length (𝓵1)	chief (𝓵2)	Neck diameter (φD2)	Overall length (L)	Shank (MT)	Number of teeth (N)
40×60ﾟ	40	6	29.44	13.5	10	25	133	MT2	9
50×60ﾟ	50	7	37.24	15.8	12	25	145		9
60×60ﾟ	60	10	43.3	16.7	15	30	155		11
80×60ﾟ	80		60.62	18.4		40	193	MT3	13
100×60ﾟ	100		77.94	24.1		40	216	MT3	15

■ Center reamer (tapered shank) (angle 90°)

Designation (φD×θ)	Large diameter (φD)	Small diameter (φD1)	Cutting edge (𝓵)	Outer diameter length (𝓵1)	chief (𝓵2)	Neck diameter (φD2)	Overall length (L)	Shank (MT)	Number of teeth (N)
40×90ﾟ	40	6	17	14	10	25	121	MT2	9
50×90ﾟ	50	7	21.5	16.5	12	25	130		9
60×90ﾟ	60	10	25	16.5	15	30	136.5		11
80×90ﾟ	80		35	19		40	168	MT3	13
100×90ﾟ	100		45	24		40	183	MT3	15

The post Fukuda Seiko CR-MT Mũi Doa Tâm (Chuôi Côn) – Center Reamer (Taper Shank) first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 02:17:05 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: CR

Mũi doa để gia công tinh hoặc vát mép lỗ tâm. Số me cắt lẻ giúp giảm tiếng kêu.
Chất liệu: HSS (SKH51)
Dung sai đường kính lớn: +0,2 đến +0,6
Dung sai góc: ±15′

■ Center reamer (Angle 60°)

Designation (φD×θ)	Large diameter (φD)	Small diameter (φD1)	Outer diameter length (𝓵1)	Cutting edge (𝓵)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)	Shape
6×60ﾟ	6	Tongari Center	13	5.2	43	6	5	Figure 1
8×60ﾟ	8		18	6.93	48		5
10×60ﾟ	10		18	8.66	48		7
12×60ﾟ	12		25	10.39	55	8
16×60ﾟ	16			13.86		10
20×60ﾟ	20			17.32		10
25×60ﾟ	25		35	31.65	70	12	9
30×60ﾟ	30		38	25.98	73
35×60ﾟ	35		43	30.31	80
40×60ﾟ	40		45	34.64	85
45×60ﾟ	45		48	38.97	88
50×60ﾟ	50		57	43.3	100
60×60ﾟ	60	10	61	43.3	111	16	11	Figure 2

■ Center reamer (angle 90°)

Designation (φD×θ)	Large diameter (φD)	Small diameter (φD1)	Outer diameter length (𝓵1)	Cutting edge (𝓵)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)	Shape
6×90ﾟ	6	Tongari Center	11	3	41	6	5	Figure 1
8×90ﾟ	8		15	4	45		5
10×90ﾟ	10		15	5	45		7
12×90ﾟ	12		20	6	50	8
16×90ﾟ	16			8		10
20×90ﾟ	20			10		10
25×90ﾟ	25		25	12.5	60	12	9
30×90ﾟ	30		30	15	65
35×90ﾟ	35			17.5	67
40×90ﾟ	40			20	70
45×90ﾟ	45		33	22.5	73
50×90ﾟ	50		37	25	80
60×90ﾟ	60	10	45	25	100	16	11	Figure 2

■ Center reamer (angle 120°)

Designation (φD×θ)	Large diameter (φD)	Small diameter (φD1)	Outer diameter length (𝓵1)	Cutting edge (𝓵)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)	Shape
6×120ﾟ	6	Tongari Center	10	1.73	41	6	5	Figure 1
8×120ﾟ	8		13	2.31	45		5
10×120ﾟ	10		13	2.89	45		7
12×120ﾟ	12		15	3.46	50	8
16×120ﾟ	16		15	4.62		10
20×120ﾟ	20		20	5.77		10
25×120ﾟ	25		20	7.22	60	12	9
30×120ﾟ	30		25	8.66	65
35×120ﾟ	35			10.10	67
40×120ﾟ	40			11.55	70
45×120ﾟ	45		30	12.99	73
50×120ﾟ	50		30	14.43	80

The post Fukuda Seiko CR Mũi Doa Tâm – Center Reamer first appeared on KOUEI | Nhận báo giá.

kvtpart — Mon, 20 Apr 2020 01:53:38 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: MR

Kích thước φ3 đến 5,5 được sản xuất theo đơn đặt hàng. Theo yêu cầu, lưỡi xoắn ốc cũng có sẵn theo đơn đặt hàng riêng.
Chất liệu: HSS (SKH51)
Số me:

(3 đến 12) 6
(13 đến 25) 8
(26 đến 39) 10
(40 đến 50) 12

Dung sai đường kính lưỡi dao:

(D≦3)+0,002～+0,007
(3＜D≦6)+0,004～+0,009
(6＜D≦10)+0,006～+0,012
(10＜D≦18)+0,007～+0,015
(18＜D ≦30)+0,008～+0,017
(30＜D≦50)+0,009～+0,020

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (MT)
6	50	130	MT1
7	55	140
8	60	150
9	70	160
10	70	160
11	75	170
12	75	170
13	80	180
14	85	190
15	90	210	MT2
16	95	215
17	100	220
18	105	225
19	105	225
20	110	230
21	120	240
22	120	240
23	130	250
24		270	MT3
25		270	MT3

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (MT)
26	140	280	MT3
27
28
29
30	150	290
31
32	160	300
33
34		325	MT4
35
36	165	330
37
38
39
40
42	170	335
44
45
46	175	340
48	180	350
50		385	MT5

The post Fukuda Seiko MR Mũi Doa Máy – Machine Reamer first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 07:26:04 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: WAC

Dao phay góc có các cạnh cắt góc bằng nhau ở cả hai mặt.
Chất liệu: HSS (SKH51)
Dung sai góc: ±15′
Dung sai đường kính lưỡi cắt: 0 đến +1.0
Dung sai chiều rộng lưỡi: ± 0,2

■ Double angle cutter (angle 30°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
30°	70	6	25.4	20
		8
		10
	75	4		22
		6
		8
		10
	100	6		28
		8
		10
		13
		15

■ Double angle cutter (angle 35°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
35°	70	10	25.4	20
	75	10		22
		13
	100	6		28
		8
		10
		15

■ Double angle cutter (angle 40°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
40°	70	10	25.4	20
		13
	75	6		22
	100	6		28
		8
		10
		15

■ Double angle cutter (angle 45°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	70	10	25.4	20
		13
	75	4		22
		6
		8
		10
		13
		15
		18

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
	125	10		32
		15
		20
		25

■ Double angle cutter (angle 50°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
50°	70	13	25.4	20
	75	8		22
		10
		13
		18
		20
	100	8		28
		10
		15
		20
	125	10		32
	125	20		32

■ Double angle cutter (angle 55°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
55°	70	13	25.4	20
	75	8		22
		10
		13
		18
		20
	100	8		28
		10
		15
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 60°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	70	10	25.4	20
	70	13		20
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
	125	10		32
		15
		20
		25
		30
	150	13		36
		15
		20

■ Double angle cutter (angle 65°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
65°	70	13	25.4	20
	75	13		22
		15
		18
	100	6		28
		8
		10
		15
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 70°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
70°	70	13	25.4	20
	75	13		22
		15
		18
		20
	100	6		28
		8
		10
		15
	125	10		32
		15
		20

■ Double angle cutter (angle 75°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
75°	70	13	25.4	20
	75	13		22
		15
		18
		20
	100	6		28
		8
		10
		15
		18
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 80°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
80°	75	10	25.4	20
		13
		15
		18
		20
	100	4		28
		6
		8
		10
		15
		18
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 90°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
90°	70	6	25.4	20
		8
		10
		13
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
90°	100	4	25.4	28
		6
		8
		10
		15
		18
		20
		25
		30
		40
		50
	125	10		32
		15
		20
		25
		30
	150	15		36
		20
		25
		30

■ Double angle cutter (angle 100°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
100°	70	13	25.4	20
	75	6		22
		8
		10
		13
		15
		18
	100	6		28
		8
		10
		15
		18
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 110°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
110°	70	13	25.4	20
	75	6		22
		8
		13
		15
		18
	100	10		28
		20
	125	10		32
		15
		20

■ Double angle cutter (angle 120°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
120°	70	10	25.4	20
	75	4		22
		6
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
120°	100	4	25.4	28
		6
		8
		10
		15
		18
		20
		25
		30
	125	10		32
		15
		20
		25
	150	15		36
		20
		25
		30

The post Fukuda Seiko WAC Dao Cắt Góc Đôi – Double Angle Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 07:14:16 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: AC-LH

Dao phay góc có lưỡi cắt góc chỉ ở một bên.
Chất liệu: HSS (SKH51)
Dung sai góc: ±15′
Dung sai đường kính lưỡi cắt: 0 đến +1.0
Dung sai chiều rộng lưỡi: ± 0,2

■ Single angle cutter (left blade) (angle 30°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
30°	70	4	25.4	20
		5
		6
		8
		10
	75	5		22
		6
		8
		9
		10
	100	4		28
		6
		8
		10
		13
		15

■ Single angle cutter (left blade) (angle 35°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
35°	70	8	25.4	20
		10
		13
	75	6		22
		8
		10
		13
	100	6		28
		8
		10
		15

■ Single angle cutter (left blade) (angle 40°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
40°	70	6	25.4	20
		8
		10
		13
	75	6		22
		8
		10
		13
	100	6		28
		8
		10
		15

■ Single angle cutter (left blade) (angle 45°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	70	4	25.4	20
		6
		8
		10
		11
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
	125	10		32
		13
		15
		20
		25
		30
	150	15		36
		20
		25
		30

■ Single angle cutter (left blade) (angle 50°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
50°	70	10	25.4	20
		13
		15
	75	6		22
		8
		10
		13
		15
		18

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
50°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
	125	10		32
		13
		15
		20
		25
		30

■ Single angle cutter (left blade) (angle 55°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
55°	70	10	25.4	20
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
55°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
	125	10		32
		13
		15
		20

■ Single angle cutter (left blade) (angle 60°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	70	10	25.4	20
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
		40
	125	10		32
		13
		15
		20
		25
		30
	150	15		36
		20
		25
		30

■ Single angle cutter (left blade) (angle 65°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
65°	70	13	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

■ Single angle cutter (left blade) (angle 70°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
70°	70	13	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

■ Single angle cutter (left blade) (angle 75°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
75°	70	13	25.4	20
		15
	75	13		22
		15
		18
		20
	100	6		28
		8
		10
		15
		18
		20
	125	10		32
		15
		20

■ Single angle cutter (left blade) (angle 80°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
80°	70	20	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

The post Fukuda Seiko AC-LH Dao Phay Góc Đơn (Lưỡi Bên Trái) – Single Angle Cutter (Left Blade) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 06:55:58 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: AC-RH

Dao phay góc có lưỡi cắt góc chỉ ở một bên.
Chất liệu: HSS (SKH51)
Dung sai góc: ±15′
Dung sai đường kính lưỡi cắt: 0 đến +1.0
Dung sai chiều rộng lưỡi: ± 0,2

■ Single angle cutter (right blade) (angle 30°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
30°	70	4	25.4	20
		5
		6
		8
		10
	75	5		22
		6
		8
		10
	100	4		28
		5
		6
		8
		9
		10
		13

■ Single angle cutter (right blade) (angle 35°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
35°	70	8	25.4	20
		10
		13
	75	6		22
		8
		10
		13
	100	6		28
		8
		10
		15

■ Single angle cutter (right blade) (angle 40°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
40°	70	6	25.4	20
		8
		10
		13
	75	6		22
		8
		10
		13
	100	6		28
		8
		10
		15

■ Single angle cutter (right blade) (angle 45°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	70	4	25.4	20
		6
		8
		10
		11
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
45°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
	125	10		32
		13
		15
		20
		25
		30
	150	15		36
		20
		25
		30

■ Single angle cutter (right blade) (angle 50°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
50°	70	10	25.4	20
		13
		15
	75	6		22
		8
		10
		13
		15
		18

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
50°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
	125	10		32
		13
		15
		20
		25
		30

■ Single angle cutter (right blade) (angle 55°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
55°	70	10	25.4	20
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
55°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
	125	10		32
		13
		15
		20

■ Single angle cutter (right blade) (angle 60°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	70	10	25.4	20
		13
		15
	75	4		22
		6
		8
		10
		13
		15
		18
		20
		25

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
60°	100	4	25.4	28
		6
		8
		10
		13
		15
		18
		20
		25
		30
		40
		50
	125	10		32
		13
		15
		20
		25
		30
	150	15		36
		20
		25
		30

■ Single angle cutter (right blade) (angle 65°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
65°	70	13	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

■ Single angle cutter (right blade) (angle 70°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
70°	70	13	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

■ Single angle cutter (right blade) (angle 75°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
75°	70	13	25.4	20
		15
	75	13		22
		15
		18
		20
	100	6		28
		8
		10
		15
		18
		20
	125	10		32
		15
		20

■ Single angle cutter (right blade) (angle 80°)

Angle (θ)	Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)
80°	70	20	25.4	20
	75	13		22
		15
		18
	100	8		28
		10
		15
		18
		20

The post Fukuda Seiko AC-RH Dao Phay Góc Đơn (Lưỡi Bên Phải) – Single Angle Cutter (Right Blade) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 06:43:03 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SSC

Dao cắt cạnh lưỡi so le có số lượng lưỡi dao cắt giảm phù hợp để cắt mạnh mẽ, các lưỡi dao được xoắn xen kẽ ở bên trái và bên phải, phù hợp để tạo rãnh sâu.
Chất liệu: HSS-Co (SKH55)
Dung sai đường kính lưỡi dao: 0 đến +0,5
Dung sai chiều rộng lưỡi dao:

( 3 đến 7) 0 đến +0,05
( 7,5 đến 11) 0 đến +0,06
(11,5 đến 30) 0 đến +0,07

■ Staggered blade side cutter (blade diameter 75 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	3	25.4	16	10.5
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	11.5
	12

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	12.5	25.4	16	10.5
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25
	26
	27
	28
	30

■ Staggered blade side cutter (blade diameter 100 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	3	25.4	18	14
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	11.5
	12

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	12.5	25.4	18	14
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25
	26
	27
	28
	30

■ Staggered blade side cutter (blade diameter 100 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	3	31.75	18	14
	3.5
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	15	25.4	18	14
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 125 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	3	25.4	22	16
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	11.5
	12

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	12.5	25.4	22	16
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25
	26
	27
	28
	29
	30

■ Staggered blade side cutter (blade diameter 125 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	3	31.75	22	16
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	15	25.4	22	16
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 150 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	3	25.4	24	18
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	12

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	12.5	25.4	24	18
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	23
	24
	25
	26
	27
	28
	30

■ Staggered blade side cutter (blade diameter 150 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	3	31.75	24	18
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	12	31.75	24	18
	12.5
	13
	14
	15
	16
	17
	18
	19
	20
	21
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 175 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	4	25.4	26	20
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	16	25.4	26	20
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 175 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	4	31.75	26	20
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	16	31.75	26	20
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 200 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	4	25.4	28	22
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	15	25.4	28	22
	16
	17
	18
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade diameter 200 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	4	31.75	28	22
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	15	31.75	28	22
	16
	17
	18
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade side cutter (blade width inch size)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	1/4″	25.4	16	10.5
	3/8″
	1/2″
100	1/4″	25.4	18	14
	3/8″
	1/2″
	1/4″	31.75
	1/2″
125	1/4″	25.4	22	16
	3/8″
	1/2″
	1/2″	31.75
150	1/4″	25.4	24	18
	3/8″
	1/2″
175	1/2″	25.4	26	20
	1/2″	31.75

The post Fukuda Seiko SSC Dao Cắt Cạnh Lưỡi So Le – Staggered-blade Side Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 06:28:21 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SC

Có các lưỡi cắt ở ngoại vi và các cạnh, và được sử dụng cho các mục đích chung như tạo rãnh, cắt bước, cắt cạnh và xác định chiều rộng.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến +0,5
Dung sai chiều rộng lưỡi dao:

( 3 đến 7) 0 đến +0,05
( 7,5 đến 11) 0 đến +0,06
(11,5 đến 30) 0 đến +0,07

■ Regular blade side cutter (blade diameter 50 x hole diameter 15.875)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
50	3	15.875	18	6
	4
	5
	6
	7
	8
	9
	10
	12
	15

■ Regular blade side cutter (blade diameter 60 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
60	3	25.4	20	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15
	16

■ Regular blade side cutter (blade diameter 65 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
65	3	25.4	20	8.5
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15

■ Regular blade side cutter (blade diameter 75 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	3	25.4	22	10.5
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	10

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	11	25.4	22	10.5
	12
	13
	14
	15
	16
	17
	18
	19
	20
	22
	23
	24
	25

■ Regular blade side cutter (blade diameter 80 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
80	3	25.4	24	11
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15

■ Regular blade side cutter (blade diameter 90 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
90	3	25.4	24	12
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15

■ Regular blade side cutter (blade diameter 100 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	3	25.4	28	14
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	12

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	13	25.4	26	14
	14
	15
	16
	17
	18
	19
	20
	22
	23
	24
	25
	26
	28
	29
	30

■ Regular blade side cutter (blade diameter 100 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
100	3	31.75	28	14
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13		26
	14
	15
	16
	18
	20

■ Regular blade side cutter (blade diameter 125 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	3	25.4	30	17.5
	3.5
	4
	4.5
	5
	5.5
	6
	7
	7.5
	8
	8.5
	9
	9.5
	10
	10.5
	11
	12
	12.5

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	13	25.4	28	17.5
	14
	15
	16
	17
	18
	19
	20
	22
	23
	24
	25
	26
	28
	29
	30

■ Regular blade side cutter (blade diameter 125 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
125	3	31.75	30	17.5
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13		28
	14
	15
	16
	18
	20

■ Regular blade side cutter (blade diameter 150 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	4	25.4	34	18
	5
	6
	7
	8
	9
	10
	10.5
	11
	12
	12.5

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	13	25.4	32	18
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Regular blade side cutter (blade diameter 150 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
150	4	31.75	34	18
	5
	6
	7
	8
	9
	10
	11
	12
	13		32
	14
	15
	16
	18
	20

■ Regular blade side cutter (blade diameter 175 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	6	25.4	36	22.5
	7
	8
	9
	10
	11
	12
	14		34
	15
	16
	18
	20
	22
	24
	25
	26
	28
	30

■ Regular blade side cutter (blade diameter 175 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
175	6	31.75	36	22.5
	8
	10
	12
	15		34
	16
	18
	20

■ Regular blade side cutter (blade diameter 200 x hole diameter 25.4)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	6	25.4	38	25
	7
	8
	9
	10
	11
	12
	14		36
	15
	16
	18
	20
	22
	24
	25
	26
	28
	30

■ Regular blade side cutter (blade diameter 200 x hole diameter 31.75)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
200	6	31.75	38	25
	8
	10
	12
	15		36
	16
	18
	20

■ Regular blade side cutter (blade width inch size)

Blade diameter (φD)	Blade width (L)	Hole diameter (φd)	Number of teeth (NT)	Side blade (H)
75	1/8″	25.4	22	10.5
	1/4″
	5/16″
	3/8″
	1/2″
100	1/8″		28	14
	3/16″
	1/4″
	5/16″
	3/8″
	1/2″
125	1/4″		30	17.5
	1/2″

The post Fukuda Seiko SC Dao Cắt Cạnh Lưỡi Tiêu Chuẩn – Standard Blade Side Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 03:41:31 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: 3C

Máy phay 3C có thể thực hiện mài tâm, khoét lỗ và vát mép trong một quy trình duy nhất, không chỉ trên các bề mặt phẳng mà còn trên các bề mặt dốc và cong mà các mũi khoan thông thường khó tiếp cận.
Chất liệu: HSS-Co (SKH56)
Số me dao: 2

Name	Tip Diameter (φD1)	Counter boring diameter (φD2)	Surface diameter (φD3)	C side	𝓵1	𝓵2	𝓵3	Overall length (L)	Shank diameter (φd)
3	4	6	8	1	1.15	3.5	6	70	6
4	4.5	7.5	9.5		1.3	4.5	8	75	8
5	6	9	11		1.73	5.5	10	90	10
6	7.2	10.5	13	1.25	2.08	6.5	12	100	12
8	10.2	13.5	16	1.25	2.94	8.5	12	110	12
10	12.2	17	19	1	3.52	10.5	15	115	16
12	14.2	19	21	1	4.1	12.5	15	120	20
14	16.2	24.5	28	1.75	4.68	14.5	20	125	25
16	18.2	26.5	30	1.75	5.25	16.5	20	130	25

The post Fukuda Seiko 3C Dao Cắt Lỗ Đối Diện Gắn Trên Bề Mặt Cho Bulông Lục Giác MC) – 3C Mill (Surface Mounting Counterbore Cutter For Hexagon Socket Bolt MC) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 03:33:17 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: DSS

Có thể đồng thời khoan và gia công lỗ chìm. Dao phay để gia công đầu vít chìm. (Không sử dụng sản phẩm này nếu có lỗ khoan trước.)
Chất liệu: HSS (SKH51)
Số me dao: 2
Dung sai đường kính mũi khoan: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng ren: Xoắn phải 25°

Name	Drill diameter (φD1)	Drill length (𝓵)	Blade diameter (φD)	Overall length (L)	Shank diameter (φd)
4	3.3	15	9.5	55	6
5	4.2	15	12	61	8
6	5	20	14	71	10
8	6.8	22	18.5	76	10

The post Fukuda Seiko DSS Dao Phay Chìm Cho Bulông Đầu Chìm Có Mũi Khoan – Submerged Milling Cutter For Countersunk Head Screws With Drill first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 03:14:02 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: DCS

Khoan và lỗ chìm có thể được xử lý cùng một lúc. Dao phay để gia công vít đầu chìm. (Nếu có lỗ thí điểm, vui lòng không sử dụng sản phẩm này.)
Chất liệu: HSS (SKH51)
Số me dao: 2
Dung sai đường kính mũi khoan: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng me: Xoắn phải 25°

Name	Drill diameter (φD1)	Drill length (𝓵)	Blade diameter (φD)	Overall length (L)	Shank diameter (φd)
3	3.5	10	7.5	44	6
4	4.5	15	9.5	55	6
5	5.5	15	12	61	8
6	6.5	20	14	71	10
8	8.5	22	18.5	76	10

The post Fukuda Seiko DCS Dao Phay Chìm Cho Bulông Đầu Chìm Có Mũi Khoan – Submerged Milling Cutter For Countersunk Head Screws With Drill first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 03:05:42 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: DCB

Khoan và xử lý lỗ chìm có thể được thực hiện đồng thời. (Không sử dụng sản phẩm này nếu có lỗ khoan trước.)
Chất liệu: HSS (SKH51)
Số me dao: 2
Dung sai đường kính mũi khoan: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng me: Xoắn phải 25ﾟ

Name	Drill diameter (φD1)	Drill length (𝓵)	Blade diameter (φD)	Overall length (L)	Shank diameter (φd)
3	3.5	15	5.9	50	6
4	4.5	15	7.4	55	6
5	5.5	20	8.9	63	8
6	6.5	25	10.4	70	8
8	8.5	30	13.4	79	10
10	10.6	35	16.8	87	12
12	12.7		18.8	92
14	15		24	98

The post Fukuda Seiko DCB Dao Phay Chìm Có Khoan (Đối Với Bulông Lục Giác) – Submerged Milling Cutter With Drill (For Hexagon Socket Head Bolts) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 02:53:36 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: MS-CB

Dao phay để gia công vít đầu chìm.
Chất liệu: HSS (SKH51)
Số me dao: 4
Dung sai của đường kính bên trong được đề xuất: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng me: Xoắn phải 12ﾟ

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
3	3.2	4	7.5	6	38	6
4	4.2	5	9.5	8	45	6
5	5.2	7	12	10	53	8
6	6.2	8	14	12	60	10
8	8.2	10	18.5	14	69	10

The post Fukuda Seiko MS-CB Dao Phay Chìm Cho Bulông Đầu Chìm – Submerged Milling Cutter For Small Countersunk Screws first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 02:31:33 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: EP-CB

Được sử dụng cho các lỗ chìm của chân đùn cho khuôn nhựa.
Chất liệu: HSS-Co (SKH56)
Số lưỡi dao: 4
Dung sai lỗ khoan đề xuất (danh nghĩa):

( 2～ 2.5 )-0.014～-0.024
( 3～ 5 )-0.020～-0.032
( 6～ 9 )-0.025～-0.040
( 10～16 )-0.032～-0.050

Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng (danh nghĩa): Xoắn phải

( 2～ 3.5 ) 15ﾟ
( 4～16 ) 25ﾟ

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
2	2	3	6	8	50	6
2.5	2.5
3	3
3.5	3.5	4	8	10
4	4
4.5	4.5	5	9	12	65
5	5
6	6	6	10	15	70	8
7	7	6	11
8	8	8	13	18	80	10
9	9		14
10	10	10	15	20	90
12	12		17
14	14	12	19	25	100	12
16	16	13	21

The post Fukuda Seiko EP-CB Dao Phay Chìm Cho Chốt Ép Đùn – Submerged Milling Cutter For Extruded Pins first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 02:16:39 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: LS-CB

Dao phay gia công lỗ chìm tiêu chuẩn JIS. Thân dài cho phép xử lý sâu.
Chất liệu: HSS-Co (SKH56)
Số lưỡi dao: 4
Dung sai lỗ khoan đề xuất (danh nghĩa):

(3 to 5)-0.020 to -0.038
(6 to 8)-0.025 to -0.047
(10 to 16)-0.032 to -0.059
(18 to 30)-0.043 to -0.073
(1/4″ to 3/8″ )-0.025～-0.047
( 1/2″ )-0.032～-0.059

Dung sai đường kính lưỡi dao (danh nghĩa):

(　3 ～　5　)+0.042～+0.078
(　6 ～　8　)+0.050～+0.093
( 10 )+0.060～+0.103
( 12 ～ 14　)+0.073～+0.125
( 16 ～ 18　)+0.088～+0.140
( 20 ～ 24　)+0.112～+0.174
( 30 )+0.136～+0.198
(1/4″～5/16″)+0.050～+0.093
( 3/8″ )+0.060～+0.130
( 1/2″ )+0.073～+0.125

Góc nghiêng me: Xoắn phải 25°

■ Long shank sinking milling cutter (JIS standard)

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
3	3.2	4	6.5	14	110	6
4	4.3	5	8	14	120	6
5	5.3	7	9.5	18		8
6	6.4	8	11	18		8
8	8.4	10	14	22		10
10	10.5	12	17.5	25	160	12
12	13	14	20	25	160
14	15	16	23	30	180
16	17	18	26	35	180	16
18	19	20	29	35	200
20	21	20	32	40
22	23	24	35
24	25	25	39		220	20
30	31.5	30	48		220	20

■ Long shank sinking milling cutter (JIS standard) (inch size)

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
1/4″	6.7	8	12	18	120	8
5/16″	8.5	10	14	22	120	10
3/8″	10	12	16	25	160	12
1/2″	14	14	21	25	160	12

The post Fukuda Seiko LS-CB Dao Phay Chìm Chuôi Dài (Tiêu Chuẩn JIS) – Long Shank Submerged Milling Cutter (JIS Standard) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 02:05:46 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: CBT

Dao phay để gia công lỗ chìm cho bu lông đầu lục giác. Kích thước danh nghĩa giống như kích thước của bu lông có lỗ bán sẵn trên thị trường.
Chất liệu: HSS (SKH51)
Số me dao: 4
Dung sai của đường kính bên trong được đề xuất: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng me: Xoắn phải 25ﾟ

■ Sinking milling cutter (for hexagon socket head bolts) taper shank

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (MT)
10	10.3	12	16.8	16	101.5	MT1
12	12.4	14	18.8	18	106.5
14	14.4	16	24	20	110.5
16	16.5	18	26	22	130.5	MT2
18	18.5	20	28	24	134.5
20	21	22	30	26	138.5
22	23	24	32	28	142.5
24	25	26	36	32	170	MT3
30	31.5	32	45	38	182
36	37.5	39	53	44	196
42	44	45	59	52	210
45	47	48	64	55	243	MT4
48	50	51	67	58	249	MT4

■ Sinking milling cutter (for hexagon socket head bolts) taper shank (inch size)

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (MT)
3/8″	9.8	12	15	16	101.5	MT1
1/2″	13.2	14	20	18	106.5	MT1
5/8″	16.5	18	26	22	130.5	MT2
3/4″	20	22	29	26	138.5
7/8″	23	24	32	28	142.5
1″	26.5	26	37	32	170	MT3
1.1/4″	33	32	49	42	187
1.1/2″	40	39	57	50	202
1.3/4″	46	48	64	56	244	MT4
2″	53	51	70	62	253	MT4

The post Fukuda Seiko CBT Dao Phay Chìm (Đối Với Bu Lông Đầu Lục Giác) Chuôi Côn – Submerged Milling Cutter (For Hexagon Socket Head Bolts) Taper Shank first appeared on KOUEI | Nhận báo giá.

kvtpart — Sun, 19 Apr 2020 01:38:15 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: CB

Dao phay để gia công lỗ chìm cho bu lông đầu lục giác. Kích thước danh nghĩa giống như kích thước của bu lông có lỗ bán sẵn trên thị trường.
Chất liệu: HSS (SKH51)
Số me dao: 4
Dung sai của đường kính bên trong được đề xuất: 0 đến -0,05
Dung sai đường kính lưỡi dao: 0 đến +0,2
Góc nghiêng me: Xoắn phải 25°

■ Sinking milling cutter (for hexagon socket head bolts)

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
3	3.2	4	5.9	6	38	6
4	4.2	5	7.4	8	45
5	5.2	7	8.9	10	53
6	6.2	8	10.4	12	60	8
8	8.2	10	13.4	14	69	10
10	10.3	12	16.8	16	76	12
12	12.3	14	18.8	18	85
14	14.3	16	24	20	90
16	16.3	18	26	22	100

■ Sinking milling cutter (for hexagon socket head bolts) (inch size)

Name	Guide diameter (φD1)	Guide Chief (𝓵1)	Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank diameter (φd)
1/8″	3.4	4	6.2	6	38	6
3/16″	4.96	7	8.7	10	53	6
1/4″	6.55	8	11	12	60	8
5/16″	8.25	10	14	14	69	10
3/8″	9.8	12	15	16	76	12
1/2″	13.2	14	20	18	85
5/8″	16.5	18	26	22	100

The post Fukuda Seiko CB Dao Phay Chìm (Đối Với Bu Lông Đầu Lục Giác) – Submerged Milling Cutter (For Hexagon Socket Head Bolts) first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 09:42:55 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: CC

Gồm sáu me giúp cải thiện công suất cắt, hiệu suất cắt tuyệt vời mà không bị kêu, chạy phương ngang khi phay và giảm đáng kể tiếng ồn kim loại khó chịu trong quá trình gia công. Lý tưởng để gia công vát mép chìm và vát chữ C trên thép hợp kim, thép carbon, nhôm, thép không gỉ, v.v. Dễ dàng mài lại. Sử dụng với các trung tâm gia công, máy phay, máy khoan, v.v.
Chất liệu: HSS-Co (SKH56)
Số me dao: 6

■ Chatterless chamfering milling cutter (angle 60°)

Angle (θ)	Large diameter (φD)	Small diameter (φd1)	Overall length (L)	Outer diameter length (𝓵)	Blade length	Shank diameter (φd)
60°	6	1.5	60	15	3.9	6
	8	2			5.2	6
	10	2.5			6.5	8
	12	3		18	7.79	8
	15	3.7	70	20	9.79	10
	16	4		20	10.39
	18	4.5		24	11.69
	20	5	80	28	12.99
	22	5.5		30	14.29	12
	25	6.2		34	16.28
	30	7.5	90	39	19.49
	35	8.7	90	45	22.78
	40	10	100	48	25.98
	45	11.2	110	51	29.27
	50	12.5	120	54	32.48

■ Chatterless chamfering milling cutter (angle 90°)

Angle (θ)	Large diameter (φD)	Small diameter (φd1)	Overall length (L)	Outer diameter length (𝓵)	Blade length	Shank diameter (φd)
90°	6	1.5	60	15	2.25	6
	8	2			3	6
	10	2.5			3.75	8
	12	3		18	4.5	8
	15	3.7	70	20	5.65	10
	16	4		20	6
	18	4.5		24	6.75
	20	5	80	28	7.5
	22	5.5		30	8.25	12
	25	6.2		34	9.4
	30	7.5	90	39	11.25
	35	8.7	90	45	13.15
	40	10	100	48	15
	45	11.2	110	51	16.9
	50	12.5	120	54	18.75

■ Chatterless chamfering milling cutter (angle 120°)

Angle (θ)	Large diameter (φD)	Small diameter (φd1)	Overall length (L)	Outer diameter length (𝓵)	Blade length	Shank diameter (φd)
120°	6	1.5	60	15	1.3	6
	8	2			1.73	6
	10	2.5			2.17	8
	12	3		18	2.6	8
	15	3.7	70	20	3.26	10
	16	4		20	3.46
	18	4.5		24	3.9
	20	5	80	28	4.33
	22	5.5		30	4.76	12
	25	6.2		34	5.43
	30	7.5	90	39	6.5
	35	8.7	90	45	7.59
	40	10	100	48	8.66
	45	11.2	110	51	9.76
	50	12.5	120	54	10.83

The post Fukuda Seiko CC Dao Phay Vát Mép Không Phát Ra Tiếng Ồn – Chatterless Chamfering Milling cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 09:32:31 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SPC

Dao phay cho rãnh chữ V
Chất liệu: HSS (SKH51)
Dung sai đường kính lớn: 0 đến +0,5
Dung sai góc: ±15′

■Umbrella type cutter with handle (angle 60° both angles)

Angle (θ)	Small diameter (φd1)	Blade length (𝓵)	Large diameter (φD)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60°	6	11	15	59	8	8
	8	13.5	20	64	10
	10	16	25	68	12
	12	18.5	30	76	16	10
	14	23	35	82	16
	16	26	40	90	25
	18	28	45	96	25	12
	20	31	50	105	32
	24	36	60	115
	26	40	65	130		14
	28	42	70	140
	30	45	75	150
	32	48	80	160

■Umbrella type cutter with handle (angle 90° both angles)

Angle (θ)	Small diameter (φd1)	Blade length (𝓵)	Large diameter (φD)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90°	6	8	15	59	8	8
	8	9	20	64	10
	10	10.5	25	68	12
	12	12	30	76	16	10
	14	15	35	82	16
	16	17	40	90	25
	18	19	45	96	25	12
	20	20	50	105	32
	24	23	60	115
	26	26	65	115		14
	28	27	70	125
	30	29	75	130
	32	30	80	140

The post Fukuda Seiko SPC Dao Cắt Dạng Ô Có Tay Cầm – Umbrella-Shaped Cutter With Handle first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 09:24:08 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SWC

Dao phay cho rãnh chữ V.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến +1
Dung sai góc: ±15′

■ W angle cutter with handle (angle 60°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60°	15	4	8	17	70	10	10
	20	5	8		80	12
	25	6	10		80	12
	30	8	14	18	85	16	12
	35	10	14	18	90	16	12
	40	12	16	20	95	20	14
	45	16	16	20	100	20	14
	50	18	18	22	110	25	16
	60	20	20	24	120	25	18

■ W angle cutter with handle (angle 90°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90°	10	3	4	10	55	6	8
	15	4	8	17	70	10	10
	20	5	8		80	12
	25	6	10		80	12
	30	8	14	18	85	16	12
	35	10	14	18	90	16	12
	40	12	16	20	95	20	14
	45	16	16	20	100	20	14
	50	18	18	22	110	25	16
	60	20	20	24	120	25	18

■ W angle cutter with handle (angle 120°)

angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
120°	10	3	4	10	55	6	8
	15	5	8	17	70	10	10
	20	5	8		80	12
	25	6	10		80	12
	30	8	14	18	85	16	12
	35	10	14	18	90	16	12
	40	12	16	20	95	20	14
	45	16	16	20	100	20	14
	50	18	18	22	110	25	16
	60	20	20	24	120	25	18

The post Fukuda Seiko SWC Dao Cắt Góc W Có Tay Cầm – W Angle Cutter With Handle first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 09:09:05 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SAC

Dao phay cho các rãnh đuôi én.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến +0,5
Dung sai góc: ±15′

■ Angle cutter with handle (angle 30°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30°	10	2	3	7	50	8	6
	12	2.3	4	9.7	52	8	6
	15	2.6	6	8.4	59	10	8
	20	3.8	7	10.2	64	10
	25	4.6	9	13.4	68	12
	30	5.2	12	16.8	76	16	10
	35	6.4	13	20.6	82	16
	40	7	16	23	90	20
	45	8.4	16	26.6	96	20
	50	9.3	18	30.7	105	25	12
	55	10	20	32.9	110
	60	11.6	20	35.4	115

■ Angle cutter with handle (angle 45°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45°	10	3	4	8	50	8	6
	12	3.5	5	8.5	52	8	6
	15	4	7	10	59	10	8
	20	6	8	13	64	10
	25	7.5	10	15.5	68	12
	30	8	14	18	76	16	10
	35	10	15	22	82	16
	40	11	18	24	90	20
	45	13.5	18	27.5	96	20
	50	15	20	30	105	25	12
	55	16.5	22	33.5	110
	60	19	22	36	115
	65	20.5	24	39.5	130		14
	70	23	24	42	140		16
	75	23.5	28	46.5	150	32	18
	80	25	30	55	160	32	20
	90	27.5	35	52.5	160	42
	100	30	40	55	170	42

■ Angle cutter with handle (angle 50°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50°	10	3.5	4	8.5	50	8	6
	12	4.2	5	7.8	52	8	6
	15	4.8	7	9.2	59	10	8
	20	7.1	8	11.9	64	10
	25	9	10	14	68	12
	30	9.5	14	16.5	76	16	10
	35	12	15	20	82	16
	40	13.1	18	21.9	90	20
	45	16	18	25	96	20
	50	17.8	20	27.2	105	25	12
	55	19.6	22	30.4	110
	60	22.6	22	32.4	115

■ Angle cutter with handle (angle 60°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60°	10	5.2	4	7.8	50	8	6
	12	6	5	6	52	8	6
	15	6.9	7	7.1	59	10	8
	20	10.4	8	8.6	64	10
	25	13	10	10	68	12
	30	13.8	14	12.2	76	16	Ten
	35	17.3	15	14.7	82	16
	40	19	18	16	90	20
	45	23.4	18	17.6	96	20
	50	26	20	19	105	twenty five	12
	55	28.6	twenty two	21.4	110
	60	32.9	twenty two	22.1	115
	65	32.9	27	27.1	130	32	14
	70	36.4	28	28.6	140		16
	75	39	30	31	150		18
	80	43.3	30	36.7	160		20
	90	43.3	40	36.7	160	42
	100	52	40	33	170	42

■ Angle cutter with handle (angle 70°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70°	10	5.5	4	7.5	50	8	6
	12	6	5	6	52	8	6
	15	7	7	7	59	10	8
	20	10	8	9	64	10
	25	13	10	10	68	12
	30	16	14	10	76	16	10
	35	20	15	12	82	16
	40	23	18	12	90	20
	45	26	18	15	96	20
	50	30	20	15	105	25	12
	55	32	22	18	110
	60	35	22	20	115

■ Angle cutter with handle (angle 75°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75°	10	5.5	4	7.5	50	8	6
	12	6	5	6	52	8	6
	15	7	7	7	59	10	8
	20	11	8	8	64	10
	25	13	10	10	68	12
	30	16	14	10	76	16	10
	35	20	15	12	82	16
	40	23	18	12	90	20
	45	26	18	15	96	20
	50	30	20	15	105	25	12
	55	32	22	18	110
	60	35	22	20	115

■ Angle cutter with handle (angle 80°)

Angle (θ)	Blade diameter (φD)	Blade length (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
80°	10	5.5	4	7.5	50	8	6
	12	6	5	6	52	8	6
	15	8	7	6	59	10	8
	20	12	8	7	64	10
	25	13	10	10	68	12
	30	16	14	10	76	16	Ten
	35	20	15	12	82	16
	40	23	18	12	90	20
	45	26	18	15	96	20
	50	30	20	15	105	25	12
	55	32	22	18	110
	60	35	22	20	115

The post Fukuda Seiko SAC Dao Cắt Góc Có Tay Cầm – Angle Cutter With Handle first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 08:08:32 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: TSE

Gia công nhôm từ cắt nặng.
Lưỡi cắt lệch tâm.
Túi chip lớn.
Các cạnh cắt lẻ, độ lệch tâm rất nhỏ.
Chất liệu: HSS-Co (SKH56)
Số me dao: 5
Dung sai đường kính lưỡi dao: 0 đến +0,05
Dung sai chiều rộng lưỡi dao: 0 đến +0,1
Góc nghiêng me: Xoay phải 30°

■ T-slot end mill (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
15	5	6	20	115	16
	6
	7
	8
	10

■ T-slot end mill (blade diameter 16)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
16	5	7	20	115	16
	6
	7
	8
	10

■ T-slot end mill (blade diameter 18)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
18	5	8	22	120	16
	6
	7
	8
	10

■ T-slot end mill (blade diameter 19)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
19	5	9	22	120	16
	6
	7
	8
	10

■ T-slot end mill (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
20	5	9	22	120	16
	6
	7
	8
	10

■ T-slot end mill (blade diameter 22)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
22	5	9.5	22	120	16
	6
	7
	8
	10
	12

■ T-slot end mill (blade diameter 24)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
24	5	10	24	125	16
	6
	7
	8
	10
	12

■ T-slot end mill (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
25	5	11	24	125	16
	6
	7
	8
	10
	12
	15

■ T-slot end mill (blade diameter 26)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
26	5	11	24	125	16
	6
	7
	8
	10
	12
	15

■ T-slot end mill (blade diameter 28)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
28	5	11	24	125	16
	6
	7
	8
	10
	12
	15

■ T-slot end mill (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
30	5	13	26	125	20
	6
	7
	8
	10
	12
	15

■ T-slot end mill (blade diameter 32)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
32	7	15	28	130	20
	8
	10
	12
	15
	16
	18
	20

■ T-slot end mill (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
35	7	17	28	130	20
	8
	10
	12
	15
	16
	18
	20

■ T-slot end mill (blade diameter 38)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
38	7	18	34	135	25
	8
	10
	12
	15
	16
	18
	20

■ T-slot end mill (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
40	7	19	34	135	25
	8
	10
	12
	15
	16
	18
	20

■ T-slot end mill (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
45	8	20	38	140	25
	10
	12
	15
	16
	18
	20
	22
	25

■ T-slot end mill (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
50	8	20	40	145	25
	10
	12
	15
	16
	18
	20
	22
	25
	30

■ T-slot end mill (blade diameter 55)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
55	10	20	42	155	25
	12
	15
	16
	18
	20
	22
	25
	30

■ T-slot end mill (blade diameter 60)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)
60	10	23	45	170	25
	12
	15
	16
	18
	20
	22
	25
	30

The post Fukuda Seiko TSE Dao Phay Rãnh Chữ T – T-slot End Mill first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 07:32:24 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: LS-STC

Hiệu suất cắt rất tốt với các góc xoắn trái và phải xen kẽ. Để cắt hiệu quả và cắt mạnh mẽ các vật liệu có khả năng gia công kém. Chuôi dài giúp khắc sâu dễ dàng.
Chất liệu: HSS-Co (SKH56)
Dung sai đường kính lưỡi dao:

(D≤16) -0,05 đến -0,16
(16 (30 (45

Dung sai chiều rộng lưỡi dao: 0 đến +0,1
Góc xoắn phải và trái: (𝓵 ≦20) 15ﾟ, (𝓵 ≧21) 12ﾟ

■ Long shank houndstooth T-slot cutter (blade diameter 10)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
10	3	4	15	130	10	6
	4
	5
	6
	7
	8

■ Long shank houndstooth T-slot cutter (blade diameter 12)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
12	3	5	15	130	10	6
	4
	5
	6
	7
	8

■ Long shank houndstooth T-slot cutter (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
15	3	6	20	135	12	6
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank houndstooth T-slot cutter (blade diameter 16)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
16	3	7	20	135	12	6
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank houndstooth T-slot cutter (blade diameter 18)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
18	3	8	22	150	12	6
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15

■ Long shank houndstooth T-slot cutter (blade diameter 19)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
19	3	8	22	150	12	6
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank staggered blade T-slot cutter (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
20	3	9	22	150	16	6
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank staggered blade T-slot cutter (blade diameter 22)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
22	3	9.5	22	150	16	6
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank staggered blade T-slot cutter (blade diameter 24)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
24	3	11	24	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12

■ Long shank staggered blade T-slot cutter (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
25	3	11	24	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Long shank houndstooth T-slot cutter (blade diameter 28)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
28	3	12	25	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15
	16

■ Long shank staggered blade T-slot cutter (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	3	13	26	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	14
	15
	16

■ Long shank houndstooth T-slot cutter (blade diameter 32)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
32	3	15	28	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Long shank staggered blade T-slot cutter (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	3	15	28	150	16	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Long shank houndstooth T-slot cutter (blade diameter 38)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
38	3	18	34	180	20	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Long shank staggered blade T-slot cutter (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	3	19	34	180	20	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Long shank staggered blade T-slot cutter (blade diameter 42)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
42	3	20	38	200	25	8
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	18
	19
	20

■ Long shank staggered blade T-slot cutter (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	3	20	38	200	25	10
	4
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20

■ Long shank staggered blade T-slot cutter (blade diameter 48)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
48	3	20	40	200	25	10
	4
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20

■ Long shank staggered blade T-slot cutter (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	3	20	40	200	25	10
	4
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20

■ Long shank staggered blade T-slot cutter (blade diameter 55)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
55	3	20	45	200	25	12
	4
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20
	25

■ Long shank staggered blade T-slot cutter (blade diameter 60)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60	3	23	50	200	25	12
	4
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20
	22
	24
	25

■ Long shank staggered blade T-slot cutter (blade diameter 65)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
65	5	23	50	220	25	14
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20
	22
	24
	25

■ Long shank houndstooth T-slot cutter (blade diameter 70)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70	5	23	50	220	25	14
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20
	22
	24
	25

■ Long shank staggered blade T-slot cutter (blade diameter 75)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75	5	30	50	230	32	16
	6
	7
	8
	9
	10
	12
	14
	15
	16
	18
	20
	22
	24
	25

Double side blade length

■ Length of both side blades

Blade diameter	A.	B.
10	2.5	2
12	2.5	2
15	3.5	3
16	3.5	3
18	4	3.5
19
20
22	4.5	4
24	5
25	5
28	5.5	4.5
30	6	5
32	6.5	5.5

Blade diameter	A.	B.
35	7	6
38	7.5	6.5
40	8	7
42	8.5	7.5
45	9	8
48	9.5	8.5
50	10	9
55	11	9.5
60		11
65
70
75

The post Fukuda Seiko LS-STC Dao Cắt Rãnh Chữ T Lưỡi So Le Chuôi Dài – Long Shank Staggered Blade T-Slot Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 06:59:02 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: STC

Các cạnh cắt ở ngoại vi và các mặt được sử dụng để cắt rãnh. Hiệu suất cắt rất tốt với các góc xoắn trái và phải xen kẽ. Để cắt hiệu quả và cắt mạnh mẽ các vật liệu có khả năng gia công kém.
Chất liệu: HSS-Co (SKH56)
Dung sai đường kính lưỡi dao:

(D≤16)-0,05 đến -0,16
(16 (30 (45

Dung sai chiều rộng lưỡi dao: 0 đến +0,1
Góc xoắn phải và trái: (𝓵 ≦20) 15ﾟ, (𝓵 ≧21) 12ﾟ

■ Staggered blade T-slot cutter (blade diameter 10)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
10	2	4	15	110	10	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10

■ Staggered blade T-slot cutter (blade diameter 12)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
12	2	5	15	110	10	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	12
	13
	14

■ Staggered blade T-slot cutter (blade diameter 13)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
13	2	5	15	110	10	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	12

■ Staggered blade T-slot cutter (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
15	2	6	20	115	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14

■ Staggered blade T-slot cutter (blade diameter 16)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
16	2	7	20	115	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 18)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
18	2	8	22	120	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 19)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
19	2	9	22	120	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
20	2	9	22	120	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 22)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
22	2	9.5	22	120	16	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 24)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
24	2	10	24	125	16	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ Staggered blade T-slot cutter (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
25	2	11	24	125	16	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	18
	20

■ Staggered blade T-slot cutter (blade diameter 26)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
26	2	11	24	125	16	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	18
	20

■ Staggered blade T-slot cutter (blade diameter 28)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
28	2	11	24	125	16	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16
	18
	20

■ Staggered blade T-slot cutter (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	2	13	26	125	20	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	10	13	26	125	20	8
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Staggered blade T-slot cutter (blade diameter 32)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
32	2.5	15	28	130	20	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
32	10	15	28	130	20	8
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ Staggered blade T-slot cutter (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	2.5	17	28	130	20	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	12	17	28	130	20	8
	13
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25

■ Staggered blade T-slot cutter (blade diameter 36)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
36	2.5	17	28	130	20	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
36	12	17	28	130	20	8
	13
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25

■ Staggered blade T-slot cutter (blade diameter 38)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
38	2.5	18	34	135	25	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
38	12	18	34	135	25	8
	13
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25

■ Staggered blade T-slot cutter (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	2.5	19	34	135	25	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	13	19	34	135	25	8
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 42)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
42	2.5	19	34	135	25	8
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
42	13	19	34	135	25	8
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	2.5	20	38	140	25	10
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	13	20	38	140	25	10
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 48)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
48	2.5	20	40	145	25	10
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
48	13	20	40	145	25	10
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	2.5	20	40	145	25	10
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	13	20	40	145	25	10
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 55)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
55	2.5	20	42	155	25	12
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
55	13	20	42	155	25	12
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 60)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60	2.5	23	45	170	25	12
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60	13	23	45	170	25	12
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 65)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
65	3	23	50	170	25	14
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
65	14	23	50	170	25	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 70)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70	3	23	50	170	25	14
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70	14	23	50	170	25	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 75)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75	3	30	50	200	32	16
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75	14	30	50	200	32	16
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 80)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
80	3	30	50	210	32	16
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
80	15	30	50	210	32	16
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 90)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90	3	30	50	220	32	18
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90	15	30	50	220	32	18
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ Staggered blade T-slot cutter (blade diameter 100)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
100	3	30	50	230	32	18
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
100	15	30	50	230	32	18
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

The post Fukuda Seiko STC Dao Cắt Rãnh Chữ T Lưỡi So Le – Staggered Blade T-Slot Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 06:45:24 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: LS-TC

Các lưỡi cắt ở ngoại vi và các mặt được sử dụng để cắt rãnh, v.v. Chuôi dài tạo điều kiện để cắt sâu.
Chất liệu: HSS-Co (SKH56)
Dung sai đường kính lưỡi dao:

(D≤16) -0,05 đến -0,16
(16 (30 (45

Dung sai chiều rộng lưỡi dao: 0 đến +0,1

■ Long shank T-slot cutter (blade diameter 10)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
10	2	4	15	130	10	8
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	10

■ Long shank T-slot cutter (blade diameter 12)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
12	2	5	15	130	10	8
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8

■ Long shank T-slot cutter (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
15	2	6	20	135	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12

■ Long shank T-slot cutter (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
20	2	9	22	150	16	10
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12

■ Long shank T-slot cutter (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
25	2	11	24	150	16	10
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12

■ Long shank T-slot cutter (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	2	13	26	150	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12
	14
	15

■ Long shank T-slot cutter (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	2	15	28	150	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12
	14
	15

■ Long shank T-slot cutter (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	2	19	34	180	20	12
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16

■ Long shank T-slot cutter (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	2	20	38	200	25	14
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16

■ Long shank T-slot cutter (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	2	20	40	200	25	14
	2.5
	3
	3.5
	4
	4.5
	5
	6
	7
	8
	9
	10
	12
	14
	15
	16

Double side blade length

■ Length of both side blades

Blade diameter	A.	B.
10	2	1.5
12	2.5	1.5
15	3	2.5
20	3.5	3
25	4.5	3.5
30	6	4
35	7.5	5.5
40	8	6
45	8.5	7
50	10	8.5

The post Fukuda Seiko LS-TC Dao Cắt Rãnh Chữ T Chuôi Dài – Long Shank T-Slot Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 03:07:56 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: TC

Có các cạnh cắt ở ngoại vi và các bên,
Được sử dụng để tạo rãnh, v.v.
Thiết kế chuôi dài hơn.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao:

(D≤16)-0,05 đến -0,16
(16 (30 (45

Dung sai chiều rộng lưỡi dao: 0 đến +0,1

■ T-slot cutter (blade diameter 8)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
8	2	3.5	15	65	10	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

■ T-slot cutter (blade diameter 9)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
9	2	3.5	15	65	10	6
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

■ T-slot cutter (blade diameter 10)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
10	2	4	15	65	10	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10

■ T-slot cutter (blade diameter 12)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
12	2	5	15	65	10	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10

■ T-slot cutter (blade diameter 13)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
13	2	6	18	75	10	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10

■ T-slot cutter (blade diameter 14)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
14	2	6	20	75	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10

■ T-slot cutter (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
15	2	6	20	80	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

■ T-slot cutter (blade diameter 16)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
16	2	7	20	80	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 18)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
18	2	8.5	20	80	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 19)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
19	2	8.5	20	80	12	8
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
20	2	9	22	90	12	10
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 22)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
22	2	9.5	22	90	12	10
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 24)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
24	2	11	24	100	12	10
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13
	14
	15
	16

■ T-slot cutter (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
25	2	11	24	100	12	10
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
25	9	11	24	100	12	10
	10
	11
	12
	13
	14
	15
	16
	18
	20

■ T-slot cutter (blade diameter 26)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
26	2	11	24	100	12	10
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
26	9	11	24	100	12	10
	10
	11
	12
	13
	14
	15
	16
	18
	20

■ T-slot cutter (blade diameter 28)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
28	2	11	24	100	12	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
28	9	11	24	100	12	12
	Ten
	11
	12
	13
	14
	15
	16
	18
	20

■ T-slot cutter (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	2	13	24	100	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
30	9	13	24	100	16	12
	10
	11
	12
	13
	14
	15
	16
	18
	19
	20

■ T-slot cutter (blade diameter 32)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
32	2	13	24	105	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
32	10	13	24	105	16	12
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ T-slot cutter (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	2	14	24	105	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
35	10	14	24	105	16	12
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ T-slot cutter (blade diameter 36)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
36	2	14	24	105	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
36	10	14	24	105	16	12
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ T-slot cutter (blade diameter 38)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
38	2	14	24	105	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
38	10	14	24	105	16	12
	11
	12
	13
	14
	15
	16
	17
	18
	19
	20

■ T-slot cutter (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	2	15	24	110	16	12
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
40	13	15	24	110	16	12
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 42)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
42	2	15	24	110	16	14
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
42	13	15	24	110	16	14
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	2	15	24	110	16	14
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
45	13	15	24	110	16	14
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 48)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
48	2	18	30	110	20	14
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
48	13	18	30	110	20	14
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief ( 𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	2	18	30	130	20	14
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
50	13	18	30	130	20	14
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 55)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
55	2	20	40	130	25	14
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
55	13	20	40	130	25	14
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 60)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60	2	23	50	170	25	16
	2.5
	3
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
60	13	23	50	170	25	16
	14
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 65)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
65	3	23	50	170	25	16
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
65	14	23	50	170	25	16
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 70)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70	3	23	50	170	25	16
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
70	14	23	50	170	25	16
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 75)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75	3	30	50	200	32	16
	3.5
	4
	4.5
	5
	5.5
	6
	7
	8
	9
	10
	11
	12
	13

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
75	14	30	50	200	32	16
	15
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 80)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
80	3	30	50	210	32	20
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
80	15	30	50	210	32	20
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 90)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90	3	30	50	220	32	22
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
90	15	30	50	220	32	22
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

■ T-slot cutter (blade diameter 100)

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
100	3	30	50	230	32	26
	4
	5
	6
	7
	8
	9
	10
	11
	12
	13
	14

Blade diameter (φD)	Blade width (𝓵)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Shank diameter (φd)	Number of teeth (N)
100	15	30	50	230	32	26
	16
	17
	18
	19
	20
	22
	24
	25
	26
	28
	30

Double side blade length

■ Length of both side blades

Blade diameter	A.	B.
8	2	1.5
9
10
12	2.5
13		2
14
15	3	2.5
16
18
19	3.5	3
20
22	4
24	4.5	3.5
25
26	5	4
28	5.5
30	6	5

Blade diameter	A.	B.
32	6.5	5
35	7.5	5.5
36	7.5	6
38	8	7
40		6
42		6
45	8.5	7
48	9.5	8
50	10	8.5
55	11	9.5
60		9
65		11
70
75
80	12	12
90	13	13
100	14	14

The post Fukuda Seiko TC Dao Cắt Rãnh Chữ T Lưỡi Thông Thường – Regular Blade T-slot Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 02:48:20 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: KCST

Dao cắt rãnh với lưỡi bên.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao:

(D≦16)+0,18～+0,3
(16＜D≦26)+0,21～+0,35
(26＜D≦40)+0,26～+0,43

Dung sai chiều rộng mũi dao: -0,014 đến -0,028

■ Key sheet cutter with side blade (blade diameter 8)

■ Key sheet cutter with side blade (blade diameter 10)

■ Key sheet cutter with side blade (blade diameter 12)

■ Key sheet cutter with side blade (blade diameter 14)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)
14	1	10	4.5	8.5	55	10
	1.2
	1.5
	1.6

■ Key sheet cutter with side blade (blade diameter 15)

■ Key sheet cutter with side blade (blade diameter 16)

■ Key sheet cutter with side blade (blade diameter 18)

■ Key sheet cutter with side blade (blade diameter 20)

■ Key sheet cutter with side blade (blade diameter 22)

■ Key sheet cutter with side blade (blade diameter 25)

■ Key sheet cutter with side blade (blade diameter 26)

■ Key sheet cutter with side blade (blade diameter 28)

■ Key sheet cutter with side blade (blade diameter 30)

■ Key sheet cutter with side blade (blade diameter 35)

■ Key sheet cutter with side blade (blade diameter 40)

The post Fukuda Seiko KCST Dao Cắt Rãnh Với Lưỡi Bên – Side Blade Key Sheet Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Sat, 18 Apr 2020 01:29:02 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: KC

Chủ yếu được sử dụng để gia công các rãnh then hình bán nguyệt, nhưng cũng được sử dụng để tạo rãnh nông đòi hỏi độ chính xác. Nó có một cạnh cắt ở ngoại vi và một độ dốc nhẹ ở bên cạnh để giảm lực cản ma sát.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao:

(D≦16)+0.18～+0.3
(16＜D≦26)+0.21～+0.35
(26＜D≦45)+0.26～+0.43
(45＜D≦70)+0.3 ～+0.5

Dung sai chiều rộng mũi dao:

(𝓵 < 4) -0.014 to -0.028
(4 ≤ 𝓵 < 7) -0.02 to -0.038
(7 ≤ 𝓵 ≤ 12) -0.025 to -0.047

■ Key sheet cutter (blade diameter 6)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
6	0.5	6	3	6	50	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.5
	3						Figure 2
	4
	5

■ Key sheet cutter (blade diameter 7)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
7	0.5	6	3	6	50	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.5
	3						Figure 2

■ Key sheet cutter (blade diameter 8)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
8	0.5	8	3.5	6	50	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
8	2.1	8	3.5	6	50	8	Figure 1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6

■ Key sheet cutter (blade diameter 10)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
10	0.5	8	4.2	7	50	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
10	2.1	8	4.2	7	50	8	Figure 1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5

■ Key sheet cutter (blade diameter 12)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
12	0.5	10	4.4	8	50	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	shape
12	2.3	10	4.4	8	50	8	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8

■ Key sheet cutter (blade diameter 13)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
13	0.5	10	4.5	8	55	8	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
13	2.3	10	4.5	8	55	8	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8

■ Key sheet cutter (blade diameter 14)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
14	0.5	10	4.5	8.5	55	10	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
14	2.3	10	4.5	8.5	55	10	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8

■ Key sheet cutter (blade diameter 15)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
15	0.5	12	4.7	9	55	Ten	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
15	2.3	12	4.7	9	55	10	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8

■ Key sheet cutter (blade diameter 16)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
16	0.5	12	5	9	55	10	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
16	2.3	12	5	9	55	10	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	10

■ Key sheet cutter (blade diameter 18)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
18	0.5	12	7	9.5	55	12	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
18	2.3	12	7	9.5	55	12	Figure 1
	2.4
	2.5
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8

■ Key sheet cutter (blade diameter 19)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
19	0.5	12	7.5	10	55	12	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
19	2.5	12	7.5	10	55	12	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 20)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
20	0.5	12	7.5	10	60	12	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
20	2.5	12	7.5	10	60	12	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 22)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
22	0.5	12	8	10	60	12	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
22	2.5	12	8	10	60	12	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 24)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
24	0.5	12	9	11	60	14	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
24	2.5	12	9	11	60	14	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 25)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
25	0.5	12	9	12	60	14	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
25	2.5	12	9	12	60	14	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 26)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
26	0.5	12	9	12	60	14	Figure 1
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
26	2.5	12	9	12	60	14	Figure 1
	2.6
	2.7
	2.8
	2.9
	3						Figure 2
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 28)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
28	0.5	12	10	12	65	14	Figure 3
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
28	2.5	12	10	12	65	14	Figure 3
	2.6
	2.7
	2.8
	2.9
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 30)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
30	0.5	12	10	12	65	14	Figure 3
	0.6
	0.7
	0.8
	0.9
	1
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
30	2.5	12	10	12	65	14	Figure 3
	2.6
	2.7
	2.8
	2.9
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	12

■ Key sheet cutter (blade diameter 32)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
32	1	12	10	12	65	14	Figure 3
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
32	2.8	12	10	12	65	14	Figure 3
	2.9						Figure 3
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	12

■ Key sheet cutter (blade diameter 35)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
35	1	12	10	15	70	16	Figure 3
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
35	2.8	12	10	15	70	16	Figure 3
	2.9						Figure 3
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	12

■ Key sheet cutter (blade diameter 38)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
38	1	12	10.5	16	70	16	Figure 3
	1.5
	2
	2.5
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	12

■ Key sheet cutter (blade diameter 40)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
40	1	12	10.5	16	70	16	Figure 3
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
40	2.8	12	10.5	16	70	16	Figure 3
	2.9						Figure 3
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	11
	12

■ Key sheet cutter (blade diameter 45)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
45	1	12	11.5	18	80	16	Figure 3
	1.1
	1.2
	1.3
	1.4
	1.5
	1.6
	1.7
	1.8
	1.9
	2
	2.1
	2.2
	2.3
	2.4
	2.5
	2.6
	2.7

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
45	2.8	12	11.5	18	80	16	Figure 3
	2.9						Figure 3
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10
	12

■ Key sheet cutter (blade diameter 50)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
50	1	16	15	20	80	16	Figure 3
	1.5
	2
	2.5
	3						Figure 4
	3.5
	4
	4.5
	5
	5.5
	6
	6.5
	7
	7.5
	8
	8.5
	9
	9.5
	10

■ Key sheet cutter (blade diameter 55)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
55	1	20	15	20	80	16	Figure 3
	1.5
	2
	2.5						Figure 4
	3

■ Key sheet cutter (blade diameter 60)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
60	1	20	16	20	90	18	Figure 3
	1.5
	2
	2.5						Figure 4
	3

■ Key sheet cutter (blade diameter 65)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
65	1.5	20	16	20	90	18	Figure 3
	2
	2.5						Figure 4
	3

■ Key sheet cutter (blade diameter 70)

Blade diameter (φD)	Blade width (𝓵)	Shank diameter (φd)	Neck diameter (φd1)	Chief (𝓵1)	Overall length (L)	Number of teeth (N)	Shape
70	1.5	20	16	20	100	18	Figure 3
	2
	2.5						Figure 4
	3

The post Fukuda Seiko KC Dao Cắt Rãnh – Key Sheet Cutter first appeared on KOUEI | Nhận báo giá.

kvtpart — Fri, 17 Apr 2020 09:38:05 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SL-BS-L

Dao phay thẳng với chuôi côn BS5. Chiều dài lưỡi dao dài.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến -0,05

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
3	30	85	BS5
4	30	85
4	40	95
5	30	85
	40	95
	50	105
6	30	85
	40	95
	50	105
	60	115
	80	135
7	30	85
	40	95
	50	105
	60	115
	80	135

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
8	30	85	BS5
	40	95
	50	105
	60	115
	80	135
9	30	85
	40	95
	50	105
	60	115
	80	135
10	30	85
	40	95
	50	105
	60	115
	80	135

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
11	30	85	BS5
	40	95
	50	105
	60	115
12	30	85
	40	95
	50	105
	60	115
	80	135
13	40	95
	50	105
	60	115
14	40	105
	50	105
	60	115
15	40	105
	50	105
	60	115

The post Fukuda Seiko SL-BS-L Dao Phay Rãnh Dài, 2 Me – Long Slotting End Mill, 2-Flute (BS Shank) first appeared on KOUEI | Nhận báo giá.

kvtpart — Fri, 17 Apr 2020 09:32:43 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SL-MT

Dao phay thẳng với chuôi côn MT1.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến -0,05

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (MT)
3	12	84	MT1
4	14	86
5	16	88
6	18	90
7
8
9	20	92
10	20	92
11	22	93
12	24	94
13
14
15

The post Fukuda Seiko SL-MT Dao Phay Rãnh, 2 Me – Slotting End Mill, 2-Flute (MT shank) first appeared on KOUEI | Nhận báo giá.

kvtpart — Fri, 17 Apr 2020 09:22:57 +0000

Xuất xứ: Nhật Bản
Nhà sản xuất: Fukuda Seiko
Model: SL-BS

Dao phay thẳng với chuôi côn BS5.
Chất liệu: HSS (SKH51)
Dung sai đường kính lưỡi dao: 0 đến -0,05

Blade diameter
(φD)

Blade width
(𝓵)

Shank diameter
(φd)

Neck diameter
(φd1)

Chief
(𝓵1)

Overall length
(L)

Number of teeth
(N)

■Slotting end mill (blade diameter 3 to 15)

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
3	12	67	BS5
3.5	14	69
4	14	69
4.5	16	71
5	16	71
5.5	18	73
6
6.5
7
7.5
8

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
8.5	20	75	BS5
9
9.5
10
10.5	22	76
11	22	76
11.5	24	77
12
12.5
13
13.5
14
14.5
15

■ Slotting end mill (inch size)

Blade diameter (φD)	Blade length (𝓵)	Overall length (L)	Shank (BS)
1/8″	12	67	BS5
3/16″	16	71
1/4″	18	73
5/16″	18	73
3/8″	20	75
7/16″	22	76
1/2″	24	77
9/16″	24	77

The post Fukuda Seiko SL-BS Dao Phay Rãnh, 2 Me – Slotting End Mill, 2-Flute (BS shank) first appeared on KOUEI | Nhận báo giá.