Air Knocker | Kouei Japan Trading | Get Quotation

EXEN RKD60PA Relay Knocker (Direct Type)

kvtpart — Sun, 09 Mar 2025 15:09:24 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKD60PA

Direct type hammer ring equipment for widespread applications

It has been used in this way

01. Food factory RKD used when removing chocolate from formwork in chocolate factory
02. Elimination of wall adhesion of tumble dryers
03. Excess paint removal for powder coating
04. Prevention of wall surface adhesion for heating furnaces, knocking off welding sputtering, and prevention of workpiece adhesion on the mesh in the drying furnace
05. Used for engraving
06. Moisture drop of the base
Features
The air-type relay knocker series (direct type) is a unique device in which the piston directly and forced the hopper wall surface etc. with the force of compressed air, and the impact eliminates the adhesion and blockage prevention of powders. In addition, since it can be used only by air supply, it is excellent in safety and economy, and can be used with peace of mind without hindrance to powders with the property of sticking when centrilytic force is given. In the case of the vibe type, it is a type that strikes the fixed position knocker base attached, but it can hit what comes moving, move the knocker itself to hit, and the application will spread with one idea. In addition, it can be used in the same way as vibe type.
Dimensions, installation and operation panel

Product dimension diagram
High strength adoption improves durability

The blow force can be varied by adjusting the supply air pressure.
Relay piping of multiple simultaneous use is possible.

Oil-free, drive-free and eco-friendly

Simple construction and high durability

Large knocker to eliminate blockages

Knocker mounting method
Operating principle of relay knocker

1. Compressed air flowing into the knocker is first supplied to the valve chamber, and the umbrella valve is pushed down and stored in the storage chamber.
2. When the three-way valve is activated to exhaust the air in the valve room, compressed air in the storage chamber moves the umbrella valve up.
3. When the umbrella valve moves, compressed air in the storage chamber pushes the piston down and hits the base surface.
Its impact force eliminates adhesion and blockage of powders.

Specification

Model	Pressure used (MPa)	Strike cycle (times/min)	Air consumption (L/time (ANR))	Strike Energy (N/m)	Impact force		Mass (kg)
Model	Pressure used (MPa)	Strike cycle (times/min)	Air consumption (L/time (ANR))	Strike Energy (N/m)	(kg/m/s)	Equivalent Hammer (pounds)	Mass (kg)
RKD30PA	0.3 ～ 0.7	1～60	0.05～0.13	5.5～13.1	1.2～1.8	1 or less	2.1
RKD40PA			0.15～0.37	9.22～22.3	2.6～4.0	1～1.5	5.6
RKD60PA			0.33～0.77	20.6～49.0	6.9～10.6	1.5～3	13.1
RKD80PA			0.60～1.40	45.1～109	15.2～23.7	3～8	18.4
RKD100PA			0.98～2.28	82.4～201	30.0～46.9	6～15	35.5
RKD120P		1～6	3.32～6.64	131～321	52.0～84.0	Twice the equivalent of 100PA	52.6

Product dimension table

Model	φA	φC	D	φE	F	G	H	I	φJ	φK	ST	L	M	O	Use Tube diameter
RKD30PA	66	70	8	15.0	38	Rp1/8	95	(25)	9.0	55	17	50	100	Rp1/4	φ8Xφ6
RKD40PA	86	95	12	23.5	55		140		13.0	70	25	75	150	Rp1/4
RKD60PA	115	138	14	35.0	65		183		15.0	110	35	90	200	Rp3/8
RKD80PA	146	148	16	47.5	60	Rp1/4	222	(28)	17.0	120	40		200	Rp1/2
RKD100PA	175	208	20	54.5	50		270		21.0	170	50		250	Rp3/4
RKD120P	220	235	21	68	43		326		17.5	198	47		300	2-Rp3/4

Installation method

Tightening torque table Unit: N/ m

Nut size		*M6	M8	M10	M12	M14	M16	M20
Tightening torque	Bottom nut	*4.8	10.8	20.6	35.3	56.9	84.3	167
Tightening torque	Top nut	*4.8	7.6	14.4	24.7	39.8	59.0	117

* When fixing the main body with the included bolts, spring washers, and hard lock nuts, please protect the tightening torque. If the tightening torque is weak, the nut may loosen due to the impact during operation.
※ For fall prevention, suspend and fix the main body with the attached fall prevention wire and shackle. Be sure to prevent loosening of the screw with wire, etc. on the screw part of the shackle.

The post EXEN RKD60PA Relay Knocker (Direct Type) first appeared on Kouei Japan Trading | Get Quotation.

Koganei Large Flow Series Air Operated Valve F-AVP500, 750

kvt part2 — Mon, 28 Dec 2020 13:48:01 +0000

Manufacturer: KOGANEI CORPORATION

Features

This compact series lineup supports precise control of small chemical flows, and it now delivers even greater variety to meet diverse application needs. In addition, the expanded lineup increases flexibility, which allows users to select the most suitable configuration with ease. Moreover, the system supports a wide range of piping specifications and valve functions, so it adapts smoothly to different process requirements. Furthermore, the lineup includes advanced options such as automatic flow adjustment, which improves control accuracy and enhances overall process efficiency.

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]		Orifice mm (Cv)	Port size
	Media	Atmosphere	A→B	B→A		Main	Operating port
F-AVP500	5～60 [41～140]	0～50 [32～122]	0～0.5 (0～5.1) [0～73]	0～0.3 (0～3.1) [0～44]	12Nozzle (2.5)	Outer dia. 1/2″ tube	Rc1/8
F-AVP750	5～60 [41～140] 5～100 [41～212]^{Note 1}				20Nozzle (7.0)	Outer dia. 3/4″ tube

The post Koganei Large Flow Series Air Operated Valve F-AVP500, 750 first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN35×60 ZTN Series JEC and JEM certified products

kvt part2 — Fri, 25 Dec 2020 13:01:50 +0000

Made in Japan
Manufacturer: Urakawa
Model: ZTN35×60

Features

JIS-C6436, JEC2200 and JEM1310 single-phase compliant products

“ZTN Series

Compliant with JIS-C6436 and JEC-2200 Standards”

Specifications

No.	Output Capacity (VA)	Model	Insulation Class	External Dimensions (mm)
No.	Output Capacity (VA)	Model	Insulation Class	A	B	C	D	E	F	G	H	Weight (kg)
1	100VA	ZTN32×40	E	120	88	79	64	101	83	4-5 x 13	Table 1	2.55
2	130VA	ZTN32×45	E	125	88	84	69	101	83	4-5 x 13	“	2.9
3	150VA	ZTN32×50	E	130	88	89	74	101	83	4-5 x 13	“	3.25
4	180VA	ZTN32×55	E	135	88	94	79	101	83	4-5 x 13	“	3.5
5	200VA	ZTN35×50	E	135	95	87	71	111	72	4-7 x 11	“	3.9
6	250VA	ZTN35×60	E	140	95	97	81	111	72	4-7 x 11	“	4.55
7	300VA	ZTN38×55	E	140	102	105	87	115	80	4-7 x 18	“	4.95
8	350VA	ZTN38×60	E	140	102	110	92	115	80	4-7 x 18	“	5.4
9	400VA	ZTN44×55	E	140	118	102	82	139	93	4-7 x 11	“	7
10	500VA	ZTN44×60	E	145	118	107	87	139	93	4-7 x 11	“	7.5
11	600VA	ZTN44×80	E	150	118	127	107	139	93	4-7 x 11	“	9.6
12	700VA	ZTN50×66	E	155	128	126	99	150	106	4-7 x 27	“	11
13	1KVA	ZTN50×92	E	155	128	152	125	150	106	4-7 x 27	“	14
14	1.2KVA	ZTN60×62	E	155	152	140	116	180	120	4-7 x 24	“	14.5
15	1.5KVA	ZTN60×77	H	200	152	155	131	180	120	4-7 x 24	“	17
16	1.8KVA	ZTN60×92	H	200	152	170	146	180	120	4-7 x 24	“	20.5

“※ Output capacity up to 1 kVA complies with JIS-C6436, and output capacity from 1.2 kVA complies with JEC-2200 standards.
Note: Dimension A represents the maximum external dimensions of the coil and terminal block and does not include the dimensions of the wiring section.”

Table 1

Current Capacity (A)	Terminal Block Height Dimensions (mm)
15A	38
20A	38
30A	38
50A	43.5
75A	44
100A	49
150A	49

Note: The terminal block is manufactured by King Seidenki Corporation and corresponds to the DFU series.

“Example Circuit”

“The current value for each model is calculated as:
Output capacity ÷ Output voltage (100V).”

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN35×60 ZTN Series JEC and JEM certified products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTC40B×85-09A02003 ZTC Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 14:20:26 +0000

Made in Japan
Manufacturer: Urakawa
Model: ZTC40B×85-09A02003

Features

EN61558-2-4 Certification No. R50171301 Class I Three-phase Certified Product

Specifications

No.	Item	Specification
1	Standard	EN61558-2-4 Class I
2	Input Voltage	380V～460V
	Number of Taps	0, 1, 2, 3, 4
3	Output Voltage	200V～220V
	Number of Taps	0, 1, 2
4	Frequency	50/60Hz
5	Insulation	Class H
6	Connection	Types
		Y – Y
		Y – Δ
		Δ – Y
		Δ – Δ
		Y with Yn – Y with Yn
		Y with Yn – Y
		Y – Y with Yn
		Δ – Y with Yn
		Y with Yn – Δ

EN61558-2-4 Class I Three-Phase Certified Product

No.	Capacity (kVA)	Output Current (A)	Model	Insulation Class	External Dimensions (mm) (Reference Values)											Weight
					A	B	C	C1	C2	D	E	F	G1	G2	H	kg
1	1.04	3	ZTC40B×48-09A02000	H	355	200	200	100	100	101	350	320	4-⌀10 x 20	⌀10	X	19
2	1.39	4	ZTC40B×59-09A02001	H	355	200	210	105	105	112	350	320	4-⌀10 x 20	⌀10	X	23
3	1.73	5	ZTC40B×70-09A02002	H	355	200	220	110	110	130	350	320	4-⌀10 x 20	⌀10	X	27
4	2.6	7.5	ZTC40B×85-09A02003	H	355	200	240	120	120	145	350	320	4-⌀10 x 20	⌀10	X	33
5	3.46	10	ZTC50H×65-09A02004	H	335	250	195	80	115	120	330	150		⌀10	X	44
6	4.33	12.5	ZTC50H×68-09A02005	H	335	250	200	85	115	123	330	150		⌀10	X	46
7	5.2	15	ZTC50H×91-09A02006	H	335	250	225	95	130	146	330	150		⌀10	X	54
8	6.93	20	ZTC50H×110-09A02007	H	385	270	255	115	140	165	330	150		⌀10	X	31
9	9.35	27	ZTC60A×95-09A02008	H	385	270	275	125	150	135	380	300	4-⌀12 x 15		X	76
10	12.5	36	ZTC80×67-09A02009	H	485	370	255	110	145	137	480	360	4-⌀12 x 15		X	105
11	15.6	45	ZTC80×85-09A02010	H	485	370	290	130	160	155	480	360	4-⌀12 x 15		X	117
12	18.7	54	ZTC80×100-09A02011	H	485	370	310	135	175	170	480	360	4-⌀12 x 15		X	135
13	22.5	65	ZTC80×115-09A02012	H	485	370	345	145	200	185	480	360	4-⌀12 x 15		X	153
14	26	75	ZTC80×118-09A02013	H	485	370	360	150	210	188	480	360	4-⌀12 x 15		X	162
15	29.4	85	ZTC80×133-09A02014	H	485	370	405	230	175	203	480	360	4-⌀12 x 15		X	182
16	32.9	95	ZTC80×160-09A02015	H	485	370	465	265	200	230	480	360	4-⌀12 x 15		X	203
17	38.1	110	ZTC100×100-09A02016	H	585	460	390	140	250	200	580	360	4-⌀12 x 15		X	223

Note:

Terminal block height relationship:

Current Value 15A 20A 30A 50A 75A 100A 150A

Height H (mm) 37 37.0 42.5 43.0 48.0 48.0 48.0
※ The terminal block arrangement is available in configurations Diagram A and Diagram B.
Diagram A

Current Value	15A	20A	30A	50A	75A	100A	150A
Height H (mm)	37	37.0	42.5	43.0	48.0	48.0	48.0

Mounting Hole Details 1

Diagram B
Mounting Hole Details 2

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V.

When the middle tap is set to 4,
the input voltage (V) can be selected from 5 options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

(Example) Selecting 460V, 440V, 415V, 400V, and 380V.

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage
460V	200V	460V	200V	440V	200V	440V	200V	440V	200V	440V	200V
440V			208V	415V		415V	208V	415V	208V
415V			220V	400V		400V	220V
400V		440V	200V	440V	208V
380V			208V	415V
460V	208V		220V	400V
440V		415V	200V	440V	220V
415V			208V	415V
400V			220V	400V
380V		400V	200V
460V	220V		208V
440V			220V
415V		380V	200V
400V			208V
380V			220V

The post Urakawa ZTC40B×85-09A02003 ZTC Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTC40B×70-09A02002 ZTC Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 14:20:24 +0000

Made in Japan
Manufacturer: Urakawa
Model: ZTC40B×70-09A02002

Features

EN61558-2-4 Certification No. R50171301 Class I Three-phase Certified Product

Specifications

No.	Item	Specification
1	Standard	EN61558-2-4 Class I
2	Input Voltage	380V～460V
	Number of Taps	0, 1, 2, 3, 4
3	Output Voltage	200V～220V
	Number of Taps	0, 1, 2
4	Frequency	50/60Hz
5	Insulation	Class H
6	Connection	Types
		Y – Y
		Y – Δ
		Δ – Y
		Δ – Δ
		Y with Yn – Y with Yn
		Y with Yn – Y
		Y – Y with Yn
		Δ – Y with Yn
		Y with Yn – Δ

EN61558-2-4 Class I Three-Phase Certified Product

No.	Capacity (kVA)	Output Current (A)	Model	Insulation Class	External Dimensions (mm) (Reference Values)											Weight
					A	B	C	C1	C2	D	E	F	G1	G2	H	kg
1	1.04	3	ZTC40B×48-09A02000	H	355	200	200	100	100	101	350	320	4-⌀10 x 20	⌀10	X	19
2	1.39	4	ZTC40B×59-09A02001	H	355	200	210	105	105	112	350	320	4-⌀10 x 20	⌀10	X	23
3	1.73	5	ZTC40B×70-09A02002	H	355	200	220	110	110	130	350	320	4-⌀10 x 20	⌀10	X	27
4	2.6	7.5	ZTC40B×85-09A02003	H	355	200	240	120	120	145	350	320	4-⌀10 x 20	⌀10	X	33
5	3.46	10	ZTC50H×65-09A02004	H	335	250	195	80	115	120	330	150		⌀10	X	44
6	4.33	12.5	ZTC50H×68-09A02005	H	335	250	200	85	115	123	330	150		⌀10	X	46
7	5.2	15	ZTC50H×91-09A02006	H	335	250	225	95	130	146	330	150		⌀10	X	54
8	6.93	20	ZTC50H×110-09A02007	H	385	270	255	115	140	165	330	150		⌀10	X	31
9	9.35	27	ZTC60A×95-09A02008	H	385	270	275	125	150	135	380	300	4-⌀12 x 15		X	76
10	12.5	36	ZTC80×67-09A02009	H	485	370	255	110	145	137	480	360	4-⌀12 x 15		X	105
11	15.6	45	ZTC80×85-09A02010	H	485	370	290	130	160	155	480	360	4-⌀12 x 15		X	117
12	18.7	54	ZTC80×100-09A02011	H	485	370	310	135	175	170	480	360	4-⌀12 x 15		X	135
13	22.5	65	ZTC80×115-09A02012	H	485	370	345	145	200	185	480	360	4-⌀12 x 15		X	153
14	26	75	ZTC80×118-09A02013	H	485	370	360	150	210	188	480	360	4-⌀12 x 15		X	162
15	29.4	85	ZTC80×133-09A02014	H	485	370	405	230	175	203	480	360	4-⌀12 x 15		X	182
16	32.9	95	ZTC80×160-09A02015	H	485	370	465	265	200	230	480	360	4-⌀12 x 15		X	203
17	38.1	110	ZTC100×100-09A02016	H	585	460	390	140	250	200	580	360	4-⌀12 x 15		X	223

Note:

Terminal block height relationship:

Current Value 15A 20A 30A 50A 75A 100A 150A

Height H (mm) 37 37.0 42.5 43.0 48.0 48.0 48.0
※ The terminal block arrangement is available in configurations Diagram A and Diagram B.
Diagram A

Current Value	15A	20A	30A	50A	75A	100A	150A
Height H (mm)	37	37.0	42.5	43.0	48.0	48.0	48.0

Mounting Hole Details 1

Diagram B
Mounting Hole Details 2

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V.

When the middle tap is set to 4,
the input voltage (V) can be selected from 5 options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

(Example) Selecting 460V, 440V, 415V, 400V, and 380V.

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage
460V	200V	460V	200V	440V	200V	440V	200V	440V	200V	440V	200V
440V			208V	415V		415V	208V	415V	208V
415V			220V	400V		400V	220V
400V		440V	200V	440V	208V
380V			208V	415V
460V	208V		220V	400V
440V		415V	200V	440V	220V
415V			208V	415V
400V			220V	400V
380V		400V	200V
460V	220V		208V
440V			220V
415V		380V	200V
400V			208V
380V			220V

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTC40B×70-09A02002 ZTC Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTC40B×59-09A02001 ZTC Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 14:19:47 +0000

Made in Japan
Manufacturer: Urakawa
Model: ZTC40B×59-09A02001

Features

EN61558-2-4 Certification No. R50171301 Class I Three-phase Certified Product

Specifications

No.	Item	Specification
1	Standard	EN61558-2-4 Class I
2	Input Voltage	380V～460V
	Number of Taps	0, 1, 2, 3, 4
3	Output Voltage	200V～220V
	Number of Taps	0, 1, 2
4	Frequency	50/60Hz
5	Insulation	Class H
6	Connection	Types
		Y – Y
		Y – Δ
		Δ – Y
		Δ – Δ
		Y with Yn – Y with Yn
		Y with Yn – Y
		Y – Y with Yn
		Δ – Y with Yn
		Y with Yn – Δ

EN61558-2-4 Class I Three-Phase Certified Product

No.	Capacity (kVA)	Output Current (A)	Model	Insulation Class	External Dimensions (mm) (Reference Values)											Weight
					A	B	C	C1	C2	D	E	F	G1	G2	H	kg
1	1.04	3	ZTC40B×48-09A02000	H	355	200	200	100	100	101	350	320	4-⌀10 x 20	⌀10	X	19
2	1.39	4	ZTC40B×59-09A02001	H	355	200	210	105	105	112	350	320	4-⌀10 x 20	⌀10	X	23
3	1.73	5	ZTC40B×70-09A02002	H	355	200	220	110	110	130	350	320	4-⌀10 x 20	⌀10	X	27
4	2.6	7.5	ZTC40B×85-09A02003	H	355	200	240	120	120	145	350	320	4-⌀10 x 20	⌀10	X	33
5	3.46	10	ZTC50H×65-09A02004	H	335	250	195	80	115	120	330	150		⌀10	X	44
6	4.33	12.5	ZTC50H×68-09A02005	H	335	250	200	85	115	123	330	150		⌀10	X	46
7	5.2	15	ZTC50H×91-09A02006	H	335	250	225	95	130	146	330	150		⌀10	X	54
8	6.93	20	ZTC50H×110-09A02007	H	385	270	255	115	140	165	330	150		⌀10	X	31
9	9.35	27	ZTC60A×95-09A02008	H	385	270	275	125	150	135	380	300	4-⌀12 x 15		X	76
10	12.5	36	ZTC80×67-09A02009	H	485	370	255	110	145	137	480	360	4-⌀12 x 15		X	105
11	15.6	45	ZTC80×85-09A02010	H	485	370	290	130	160	155	480	360	4-⌀12 x 15		X	117
12	18.7	54	ZTC80×100-09A02011	H	485	370	310	135	175	170	480	360	4-⌀12 x 15		X	135
13	22.5	65	ZTC80×115-09A02012	H	485	370	345	145	200	185	480	360	4-⌀12 x 15		X	153
14	26	75	ZTC80×118-09A02013	H	485	370	360	150	210	188	480	360	4-⌀12 x 15		X	162
15	29.4	85	ZTC80×133-09A02014	H	485	370	405	230	175	203	480	360	4-⌀12 x 15		X	182
16	32.9	95	ZTC80×160-09A02015	H	485	370	465	265	200	230	480	360	4-⌀12 x 15		X	203
17	38.1	110	ZTC100×100-09A02016	H	585	460	390	140	250	200	580	360	4-⌀12 x 15		X	223

Note:

Terminal block height relationship:

Current Value 15A 20A 30A 50A 75A 100A 150A

Height H (mm) 37 37.0 42.5 43.0 48.0 48.0 48.0
※ The terminal block arrangement is available in configurations Diagram A and Diagram B.
Diagram A

Current Value	15A	20A	30A	50A	75A	100A	150A
Height H (mm)	37	37.0	42.5	43.0	48.0	48.0	48.0

Mounting Hole Details 1

Diagram B
Mounting Hole Details 2

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V.

When the middle tap is set to 4,
the input voltage (V) can be selected from 5 options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

(Example) Selecting 460V, 440V, 415V, 400V, and 380V.

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage
460V	200V	460V	200V	440V	200V	440V	200V	440V	200V	440V	200V
440V			208V	415V		415V	208V	415V	208V
415V			220V	400V		400V	220V
400V		440V	200V	440V	208V
380V			208V	415V
460V	208V		220V	400V
440V		415V	200V	440V	220V
415V			208V	415V
400V			220V	400V
380V		400V	200V
460V	220V		208V
440V			220V
415V		380V	200V
400V			208V
380V			220V

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTC40B×59-09A02001 ZTC Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTC40B×48-09A02000 ZTC Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 07:16:37 +0000

Manufacturer: Urakawa
Model: ZTC40B×48-09A02000

Features

EN61558-2-4 Certification No. R50171301 Class I Three-phase Certified Product

Specifications

No.	Item	Specification
1	Standard	EN61558-2-4 Class I
2	Input Voltage	380V～460V
	Number of Taps	0, 1, 2, 3, 4
3	Output Voltage	200V～220V
	Number of Taps	0, 1, 2
4	Frequency	50/60Hz
5	Insulation	Class H
6	Connection	Types
		Y – Y
		Y – Δ
		Δ – Y
		Δ – Δ
		Y with Yn – Y with Yn
		Y with Yn – Y
		Y – Y with Yn
		Δ – Y with Yn
		Y with Yn – Δ

EN61558-2-4 Class I Three-Phase Certified Product

No.	Capacity (kVA)	Output Current (A)	Model	Insulation Class	External Dimensions (mm) (Reference Values)											Weight
					A	B	C	C1	C2	D	E	F	G1	G2	H	kg
1	1.04	3	ZTC40B×48-09A02000	H	355	200	200	100	100	101	350	320	4-⌀10 x 20	⌀10	X	19
2	1.39	4	ZTC40B×59-09A02001	H	355	200	210	105	105	112	350	320	4-⌀10 x 20	⌀10	X	23
3	1.73	5	ZTC40B×70-09A02002	H	355	200	220	110	110	130	350	320	4-⌀10 x 20	⌀10	X	27
4	2.6	7.5	ZTC40B×85-09A02003	H	355	200	240	120	120	145	350	320	4-⌀10 x 20	⌀10	X	33
5	3.46	10	ZTC50H×65-09A02004	H	335	250	195	80	115	120	330	150		⌀10	X	44
6	4.33	12.5	ZTC50H×68-09A02005	H	335	250	200	85	115	123	330	150		⌀10	X	46
7	5.2	15	ZTC50H×91-09A02006	H	335	250	225	95	130	146	330	150		⌀10	X	54
8	6.93	20	ZTC50H×110-09A02007	H	385	270	255	115	140	165	330	150		⌀10	X	31
9	9.35	27	ZTC60A×95-09A02008	H	385	270	275	125	150	135	380	300	4-⌀12 x 15		X	76
10	12.5	36	ZTC80×67-09A02009	H	485	370	255	110	145	137	480	360	4-⌀12 x 15		X	105
11	15.6	45	ZTC80×85-09A02010	H	485	370	290	130	160	155	480	360	4-⌀12 x 15		X	117
12	18.7	54	ZTC80×100-09A02011	H	485	370	310	135	175	170	480	360	4-⌀12 x 15		X	135
13	22.5	65	ZTC80×115-09A02012	H	485	370	345	145	200	185	480	360	4-⌀12 x 15		X	153
14	26	75	ZTC80×118-09A02013	H	485	370	360	150	210	188	480	360	4-⌀12 x 15		X	162
15	29.4	85	ZTC80×133-09A02014	H	485	370	405	230	175	203	480	360	4-⌀12 x 15		X	182
16	32.9	95	ZTC80×160-09A02015	H	485	370	465	265	200	230	480	360	4-⌀12 x 15		X	203
17	38.1	110	ZTC100×100-09A02016	H	585	460	390	140	250	200	580	360	4-⌀12 x 15		X	223

Note:

Terminal block height relationship:

Current Value 15A 20A 30A 50A 75A 100A 150A

Height H (mm) 37 37.0 42.5 43.0 48.0 48.0 48.0
※ The terminal block arrangement is available in configurations Diagram A and Diagram B.
Diagram A

Current Value	15A	20A	30A	50A	75A	100A	150A
Height H (mm)	37	37.0	42.5	43.0	48.0	48.0	48.0

Mounting Hole Details 1

Diagram B
Mounting Hole Details 2

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V

When the middle tap is set to 0,
the input voltage (V) can be selected from the following options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

W
380V
W
400V
W
380V

You can choose one option.
(Example) Selecting 415V.

When the middle tap is set to 4,
the input voltage (V) can be selected from 5 options:
360 / 380 / 400 / 415 / 420 / 440 / 460 / 480

(Example) Selecting 460V, 440V, 415V, 400V, and 380V.

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage	Input Voltage	Output Voltage
460V	200V	460V	200V	440V	200V	440V	200V	440V	200V	440V	200V
440V			208V	415V		415V	208V	415V	208V
415V			220V	400V		400V	220V
400V		440V	200V	440V	208V
380V			208V	415V
460V	208V		220V	400V
440V		415V	200V	440V	220V
415V			208V	415V
400V			220V	400V
380V		400V	200V
460V	220V		208V
440V			220V
415V		380V	200V
400V			208V
380V			220V

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTC40B×48-09A02000 ZTC Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTE80×225-09A10012 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 06:19:02 +0000

Manufacturer: Urakawa
Model: ZTE80×225-09A10012

Features

EN61558-2-4 Class I Single-Phase Standard Product

Specifications

Capacity (kVA)	Model	Insulation Class	External Dimensions (mm)							Weight
			A	B	C	D	F	G	H	Kg
2	ZTE160×105-09A10002	H	220	195	167	145	138	4-⌀10 x 11	“	27
3	ZTE160×120-09A10004	H	245	195	182	60	138	4-⌀10 x 11	“	33
5	ZTE60A×135-09A10008	H	270	290	215	185	140	4-⌀12 x 15	“	53
7.5	ZTE70×144-09A10009	H	320	280	234	204	160	4-⌀12 x 15	“	64
10	ZTE70×165-09A10010	H	395	280	255	225	160	4-⌀12 x 15	“	77
15	ZTE80×175-09A10011	H	420	320	250	225	170	4-⌀10	“	104
20	ZTE80×225-09A10012	H	520	320	305	275	170	4-⌀10	“	132

Circuit Example

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38
20A	38
30A	38
50A	43
75A	44
100A	49
150A	49
200A	56

The terminal block corresponds to the DFU series manufactured by Mibu Electric Works Co., Ltd.

The current value is the output capacity of each model divided by the output voltage (105V).
External Dimension Diagram

Mounting Hole Details 1

Mounting Hole Details 2

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTE80×225-09A10012 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTE80×175-09A10011 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 06:18:59 +0000

Manufacturer: Urakawa
Model: ZTE80×175-09A10011

Features

EN61558-2-4 Class I Single-Phase Standard Product

Specifications

Capacity (kVA)	Model	Insulation Class	External Dimensions (mm)							Weight
			A	B	C	D	F	G	H	Kg
2	ZTE160×105-09A10002	H	220	195	167	145	138	4-⌀10 x 11	“	27
3	ZTE160×120-09A10004	H	245	195	182	60	138	4-⌀10 x 11	“	33
5	ZTE60A×135-09A10008	H	270	290	215	185	140	4-⌀12 x 15	“	53
7.5	ZTE70×144-09A10009	H	320	280	234	204	160	4-⌀12 x 15	“	64
10	ZTE70×165-09A10010	H	395	280	255	225	160	4-⌀12 x 15	“	77
15	ZTE80×175-09A10011	H	420	320	250	225	170	4-⌀10	“	104
20	ZTE80×225-09A10012	H	520	320	305	275	170	4-⌀10	“	132

Circuit Example

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38
20A	38
30A	38
50A	43
75A	44
100A	49
150A	49
200A	56

The terminal block corresponds to the DFU series manufactured by Mibu Electric Works Co., Ltd.

The current value is the output capacity of each model divided by the output voltage (105V).
External Dimension Diagram

Mounting Hole Details 1

Mounting Hole Details 2

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTE80×175-09A10011 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTE70×165-09A10010 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 06:18:58 +0000

Manufacturer: Urakawa
Model: ZTE70×165-09A10010

Features

EN61558-2-4 Class I Single-Phase Standard Product

Specifications

Capacity (kVA)	Model	Insulation Class	External Dimensions (mm)							Weight
			A	B	C	D	F	G	H	Kg
2	ZTE160×105-09A10002	H	220	195	167	145	138	4-⌀10 x 11	“	27
3	ZTE160×120-09A10004	H	245	195	182	60	138	4-⌀10 x 11	“	33
5	ZTE60A×135-09A10008	H	270	290	215	185	140	4-⌀12 x 15	“	53
7.5	ZTE70×144-09A10009	H	320	280	234	204	160	4-⌀12 x 15	“	64
10	ZTE70×165-09A10010	H	395	280	255	225	160	4-⌀12 x 15	“	77
15	ZTE80×175-09A10011	H	420	320	250	225	170	4-⌀10	“	104
20	ZTE80×225-09A10012	H	520	320	305	275	170	4-⌀10	“	132

Circuit Example

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38
20A	38
30A	38
50A	43
75A	44
100A	49
150A	49
200A	56

The terminal block corresponds to the DFU series manufactured by Mibu Electric Works Co., Ltd.

The current value is the output capacity of each model divided by the output voltage (105V).
External Dimension Diagram

Mounting Hole Details 1

Mounting Hole Details 2

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTE70×165-09A10010 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTE160×120-09A10004 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 06:18:04 +0000

Manufacturer: Urakawa
Model: ZTE160×120-09A10004

Features

EN61558-2-4 Class I Single-Phase Standard Product

Specifications

Capacity (kVA)	Model	Insulation Class	External Dimensions (mm)							Weight
			A	B	C	D	F	G	H	Kg
2	ZTE160×105-09A10002	H	220	195	167	145	138	4-⌀10 x 11	“	27
3	ZTE160×120-09A10004	H	245	195	182	60	138	4-⌀10 x 11	“	33
5	ZTE60A×135-09A10008	H	270	290	215	185	140	4-⌀12 x 15	“	53
7.5	ZTE70×144-09A10009	H	320	280	234	204	160	4-⌀12 x 15	“	64
10	ZTE70×165-09A10010	H	395	280	255	225	160	4-⌀12 x 15	“	77
15	ZTE80×175-09A10011	H	420	320	250	225	170	4-⌀10	“	104
20	ZTE80×225-09A10012	H	520	320	305	275	170	4-⌀10	“	132

Circuit Example

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38
20A	38
30A	38
50A	43
75A	44
100A	49
150A	49
200A	56

The terminal block corresponds to the DFU series manufactured by Mibu Electric Works Co., Ltd.

The current value is the output capacity of each model divided by the output voltage (105V).
External Dimension Diagram

Mounting Hole Details 1

Mounting Hole Details 2

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTE160×120-09A10004 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTE160×105-09A10002 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:52:52 +0000

Manufacturer: Urakawa
Model: ZTE160×105-09A10002

Features

EN61558-2-4 Class I Single-Phase Standard Product

Specifications

Capacity (kVA)	Model	Insulation Class	External Dimensions (mm)							Weight
			A	B	C	D	F	G	H	Kg
2	ZTE160×105-09A10002	H	220	195	167	145	138	4-⌀10 x 11	“	27
3	ZTE160×120-09A10004	H	245	195	182	60	138	4-⌀10 x 11	“	33
5	ZTE60A×135-09A10008	H	270	290	215	185	140	4-⌀12 x 15	“	53
7.5	ZTE70×144-09A10009	H	320	280	234	204	160	4-⌀12 x 15	“	64
10	ZTE70×165-09A10010	H	395	280	255	225	160	4-⌀12 x 15	“	77
15	ZTE80×175-09A10011	H	420	320	250	225	170	4-⌀10	“	104
20	ZTE80×225-09A10012	H	520	320	305	275	170	4-⌀10	“	132

Circuit Example

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38
20A	38
30A	38
50A	43
75A	44
100A	49
150A	49
200A	56

The terminal block corresponds to the DFU series manufactured by Mibu Electric Works Co., Ltd.

The current value is the output capacity of each model divided by the output voltage (105V).
External Dimension Diagram

Mounting Hole Details 1

Mounting Hole Details 2

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTE160×105-09A10002 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN60×92-60061 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:47:22 +0000

Manufacturer:Urakawa
Model: ZTN60×92-60061

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN60×92-60061 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN60×77-60060 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:47:19 +0000

Manufacturer:Urakawa
Model: ZTN60×77-60060

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN60×77-60060 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN60×62-60059 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:47:16 +0000

Manufacturer:Urakawa
Model: ZTN60×62-60059

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN60×62-60059 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN50×92-60058 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:41:11 +0000

Manufacturer:Urakawa
Model: ZTN50×92-60058

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN50×92-60058 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN50×66-60057 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:41:09 +0000

Manufacturer:Urakawa
Model: ZTN50×66-60057

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN50×66-60057 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN44×80-60056 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:41:03 +0000

Manufacturer:Urakawa
Model: ZTN44×80-60056

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN44×80-60056 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN44×60-60055 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:41:01 +0000

Manufacturer:Urakawa
Model: ZTN44×60-60055

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

The post Urakawa ZTN44×60-60055 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN44×55-60054 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:40:58 +0000

Manufacturer:Urakawa
Model: ZTN44×55-60054

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN44×55-60054 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN38×60-60053 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:40:56 +0000

Manufacturer:Urakawa
Model: ZTN38×60-60053

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN38×60-60053 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN38×55-60052 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:35:17 +0000

Manufacturer:Urakawa
Model: ZTN38×55-60052

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN38×55-60052 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN35×60-60051 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:35:14 +0000

Manufacturer:Urakawa
Model: ZTN35×60-60051

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN35×60-60051 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN35×50-60050 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:35:12 +0000

Manufacturer:Urakawa
Model: ZTN35×50-60050

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN35×50-60050 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Urakawa ZTN32×55-60049 ZTN, ZTE Series EN, UL Certified Products

kvt part2 — Thu, 24 Dec 2020 05:35:05 +0000

Manufacturer:Urakawa
Model: ZTN32×55-60049

Features

EN61558-2-4 Class I Single-phase Certified Product Certification No. 9950849

Specifications

No.	Capacity (VA)	Model	Insulation Class	External Dimensions (mm)								Weight
				A	B	C	D	E	F	G	H	Kg
1	100	ZTN32×50-60048	E	120	88	89	74	101	83	4-5 x 13		3.2
2	150	ZTN32×55-60049	E	130	88	94	79	101	83	4-5 x 13	“	3.5
3	180	ZTN35×50-60050	E	130	95	87	72	110	72	4-7 x 11	“	3.9
4	200	ZTN35×60-60051	E	140	95	97	82	110	72	4-7 x 11	“	4.55
5	300	ZTN38×55-60052	E	135	102	1005	87	115	80	4-7 x 18	“	4.95
6	350	ZTN38×60-60053	E	140	102	110	92	115	80	4-7 x 18	“	5.5
7	400	ZTN44×55-60054	E	140	118	102	82	139	93	4-7 x 11	“	6.9
8	450	ZTN44×60-60055	E	145	118	107	87	139	93	4-7 x 11	“	7.5
9	550	ZTN44×80-60056	E	170	118	127	107	139	93	4-7 x 11	“	9.6
10	650	ZTN50×66-60057	E	155	128	126	99	150	106	4-7 x 27	“	10.5
11	800	ZTN50×92-60058	E	180	128	153	125	150	106	4-7 x 27	“	13.5
12	1000	ZTN60×62-60059	E	155	152	140	116	180	120	4-7 x 24	“	14.5
13	1200	ZTN60×77-60060	E	170	152	155	131	180	120	4-7 x 24	“	17
14	1500	ZTN60×92-60061	E	200	152	170	146	180	120	4-7 x 24	“	20.5

Note: Dimension “A” represents the maximum external dimensions of the coil and terminal block, excluding the dimensions of the wiring section.

Table 1

Current Capacity (A)	Terminal Block Height (mm)
15A	38.0
20A	38.0
30A	38.0
50A	43.5
75A	44.0
100A	49.0
150A	49.0

Note: The terminal block corresponds to the DFU series manufactured by Ohse Electric Works Co., Ltd.

Details of Mounting Holes

EN Standard Certified Product Circuit

The current value is the output capacity of each model divided by the output voltage (100V).

Kouei is Distributor/Agent of Urakawa.
Other items of Urakawa
Request the quotation for Urakawa.

The post Urakawa ZTN32×55-60049 ZTN, ZTE Series EN, UL Certified Products first appeared on Kouei Japan Trading | Get Quotation.

Cosmos Bead Screw-Type Stirring Rod

kvt part2 — Mon, 21 Dec 2020 04:25:19 +0000

Manufacturer: Cosmos Bead
Model: Screw-Type Stirring Rod

Specifications

code	Diameter (φ mm)	Standard (mm)
1652-01	45	8φ × 500
1652-02	60	8φ × 500
1652-03	75	8φ × 500

The post Cosmos Bead Screw-Type Stirring Rod first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKD120P Air Knocker (Direct Type)

kvtpart — Sun, 20 Dec 2020 02:48:59 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKD120P

Direct-type hammer ring equipment for widespread applications

It has been used in this way

01. Food factory RKD used when removing chocolate from formwork in a chocolate factory.

02. Elimination of wall adhesion of tumble dryers

03. Excess paint removal for powder coating

04. Prevention of wall surface adhesion for heating furnaces, knocking off welding sputtering, and prevention of workpiece adhesion on the mesh in the drying furnace

05. Used for engraving

06. Moisture drop of the base

Features

The air-type relay knocker series (direct type) is a unique device in which the piston directly forces the hopper wall surface etc. with the force of compressed air, and the impact eliminates the adhesion and blockage prevention of powders. In addition, since it can be used only by air supply, it is excellent in safety and economy and can be used with peace of mind without hindrance to powders with the property of sticking when centralistic force is given. The case of the vibe type, it is a type that strikes the fixed position knocker base attached, but it can hit what comes moving, move the knocker itself to hit, and the application will spread with one idea. In addition, it can be used in the same way as the vibe type.

Dimensions, installation and operation panel

Product dimension diagram

High-strength adoption improves durability

The blow force can be varied by adjusting the supply air pressure.

Relay piping of multiple simultaneous use is possible.

Oil-free, drive-free and eco-friendly

Simple construction and high durability

Large knocker to eliminate blockages

Knocker mounting method

Operating principle of relay knocker

1. Compressed air flowing into the knocker is first supplied to the valve chamber, and the umbrella valve is pushed down and stored in the storage chamber.
2. When the three-way valve is activated to exhaust the air in the valve room, compressed air in the storage chamber moves the umbrella valve up.
3. When the umbrella valve moves, compressed air in the storage chamber pushes the piston down and hits the base surface.
Its impact force eliminates adhesion and blockage of powders.

Specification

Model	Pressure used (MPa)	Strike cycle (times/min)	Air consumption (L/time (ANR))	Strike Energy (N/m)	Impact force		Mass (kg)
Model	Pressure used (MPa)	Strike cycle (times/min)	Air consumption (L/time (ANR))	Strike Energy (N/m)	(kg/m/s)	Equivalent Hammer (pounds)	Mass (kg)
RKD30PA	0.3 ～ 0.7	1～60	0.05～0.13	5.5～13.1	1.2～1.8	1 or less	2.1
RKD40PA			0.15～0.37	9.22～22.3	2.6～4.0	1～1.5	5.6
RKD60PA			0.33～0.77	20.6～49.0	6.9～10.6	1.5～3	13.1
RKD80PA			0.60～1.40	45.1～109	15.2～23.7	3～8	18.4
RKD100PA			0.98～2.28	82.4～201	30.0～46.9	6～15	35.5
RKD120P		1～6	3.32～6.64	131～321	52.0～84.0	Twice the equivalent of 100PA	52.

Product

Model	φA	φC	D	φE	F	G	H	I	φJ	φK	ST	L	M	O	Use Tube diameter
RKD30PA	66	70	8	15.0	38	Rp1/8	95	(25)	9.0	55	17	50	100	Rp1/4	φ8Xφ6
RKD40PA	86	95	12	23.5	55		140		13.0	70	25	75	150	Rp1/4
RKD60PA	115	138	14	35.0	65		183		15.0	110	35	90	200	Rp3/8
RKD80PA	146	148	16	47.5	60	Rp1/4	222	(28)	17.0	120	40		200	Rp1/2
RKD100PA	175	208	20	54.5	50		270		21.0	170	50		250	Rp3/4
RKD120P	220	235	21	68	43		326		17.5	198	47		300	2-Rp3/4

Installation method

Tightening torque table Unit: N/ m

Nut size		*M6	M8	M10	M12	M14	M16	M20
Tightening torque	Bottom nut	*4.8	10.8	20.6	35.3	56.9	84.3	167
Tightening torque	Top nut	*4.8	7.6	14.4	24.7	39.8	59.0	117

The post EXEN RKD120P Air Knocker (Direct Type) first appeared on Kouei Japan Trading | Get Quotation.

EXEN EKE5000 Air Knocker Control Panel For Indoor/Outdoor Use

kvtpart — Sat, 19 Dec 2020 02:04:06 +0000

Products Made In Japan
Manufacturer: EXEN
Model: EKE5000

Knocker control panel supporting three input voltages!

This product is used for the following applications:

01Used when the timer operation for the number RKVs to be controlled is required for hopper in the environmental recycling plant
02Prevention of blockage in dust hopper for dust collector in waste treatment plant

Features

EKE5000 model is a control panel for indoor and outdoor use that can controls the operation interval of air knocker, Mini Mini Blaster, and soft disk blaster and that can operate two lines of A and B with the solenoid valve included.　（IP code 44 draining waterproof) The input power voltage is 100ＶAC to 240ＶAC. （Input power voltage of 24VDC can be supported: built-to-order product) The timer can be set in wide range of time from 1 second to 99 hours, and the timer display employing LED is easily viewable. In addition to the timer control, the control of the number of times of operations is also possible.

Input power voltage range (100VAC to 240VAC) expanding applications

The product can be adapted to almost all fields because one control panel supports the input power with single-phase 100VAC to 240VAC voltage. The output voltage is the same as the input voltage. (The product supporting the input of 24VDC is a built-to-order product.)

Bright and clear timer display

The timer is displayed in bright and clear LED display, which allows the setting time to be checked even in a dark site.

Easy timer setup

The timer is set by opening the cover and then flipping the switches of second, minute, and hour with a finger to easily set second, minute, and hour to 0.5, 1 to 99 seconds, 1 to 99 minutes, and 1 to 99 hours, respectively.

Number of times of operations can be set

After the interval time of operation is set, the number of times of operations can also be set easily. The setting number is 1 to 99, and infinite. It is convenient that the remaining number of times from start to end is also displayed.

Selection of “Standard” and “Alternation” modes

When using the knockers divided into two lines by use of the port solenoid valve, select “Alternation” mode to perform the alternating operation of two lines of A and B. （the same as the function of knocker control panel HKE series) If only A line is used with the timer setting time long, select “Standard” mode. The product is factory-set to “Alternation” mode.

Simultaneous use of multiple knockers

The number of knockers that can be used (RKV, RKD, and RKVS, under standard piping) by EKE5000 model. 15: 10 sets, 20PA and 30PA: 8 sets, 60PA: 6 sets, 80 and 100PA: 4 sets (simultaneous control per line) (When the relay piping is used, up to 10 knockers can be used per line regardless of model)

IP code 44

With a structure complying with IP code IP44 draining waterproof and dustproof, EKE5000 model can be used both indoors and outdoors. It can be installed to any site where there is a large amount of dust or outdoors.

Operation triggered by signal from external equipment

The use of external contact (a-contact) of terminal block in control panel allows the knocker to start striking upon receiving the hopper opening-closing valve signal or the conveyance line signal, which is convenient to remote operation during automatic control.

Convenient combination of setup of infinite number of times and external signal

After the operation interval time is set in timer setup, if the number of times of operations is set to infinite, the knocker continues operation while external signal is received.

Easy test run

Before the timer is set, it is possible to check whether the relay knocker or blaster installed operates correctly, by setting the power switch on the panel to “Setup” and then pressing “Enter” key.

EKE5000 model: precautions for wiring

“2” and “3” of terminal block are used when the control panel is controlled externally. Use the control panel with a switch is connected between “2” and “3” of terminal block.

Specification

EKE5000

Model	Protection Class	Input Voltage (V)	Timer’s Set Time	Stroke Cycle	Working Pressure (MPa)	Number Of The Units Can Be Operated	Approx dimensions (LXWXH)(mm)	Weight （kg)
EKE5000	IP44	Single Phase AC100-240	On Setting 0.5sec	1-99. Infinity	0.3-0.7	15 10 Units. 20・30PA 8 Units. 40・60PA 6 Units. 80・100 PA 4 Units. (Per 1 System)	450x390x219	13.7
EKE5000	IP44	Single Phase AC100-240	Off Setting 1sec-pphrs	1-99. Infinity	0.3-0.7		450x390x219	13.7

（Imperial System）

Model	Protection Class	Input Voltage (V)	Timer’s Set Time	Stroke Cycle	Working Pressure (PSI)	Number Of The Units Can Be Operated	Approx dimensions (LXWXH)(inch)	Weight （lb)
EKE5000	IP44	Single Phase AC100-240	On Setting 0.5sec	1-99. Infinity	44-102	15 10 Units. 20・30PA 8 Units. 40・60PA 6 Units. 80・100 PA 4 Units. (Per 1 System)	17-1/32 x 15-1/64 x 8-5/8	30.20
EKE5000	IP44	Single Phase AC100-240	Off Setting 1sec-pphrs	1-99. Infinity	44-102		17-1/32 x 15-1/64 x 8-5/8	30.20

Dimensions, installation, control panel

Product dimensional drawings

EKE5000（Parentheses inch display）

The post EXEN EKE5000 Air Knocker Control Panel For Indoor/Outdoor Use first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS20F Stainless Steel Knocker (Ferrule Type)

kvtpart — Sat, 19 Dec 2020 01:34:54 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS20F

Easy attachment/detachment! Sanitary support ferrule clamp type knocker

This product is used for the following applications:

01Installation for preventing clogging in the SUS hopper in the pharmaceutical factory
02Prevention of adhesion of ceramic material in the hopper

Features

The stainless steel knocker, a sister product of high-performance Air Knocker series, is an air knocker with stainless steel body that prevents adhesion and blockage of powder in hopper or tank. The stainless knocker is suitable for pharmaceutical, food, and chemical industries or other sites where corrosion resistance and safety are required.
This ferrule clamp type knocker can be manually attached or detached to or from the small container or chute that meets the sanitary specification and that is often rinsed in water or is cleaned. It is a stainless steel knocker suitable for the field where the container is frequently rinsed in water.
）The unique operating principle of this product is that the force of compressed air causes the piston to energetically strike the base surface, which eliminates the adhesion or blockage of powder. Also, the stainless knocker operates on only the supply air, which is excellent in safety and economics. Like air knocker series, the stainless steel knocker has an adjustable impact force by the supply air and the relay piping function. (RKVS15 does not support the relay piping.)
Stainless knocker excellent in corrosion resistance adopts stainless steel material which is hard to rust, such as body, standard base and mounting bolt. It is ideal for installation in the food, chemical and pharmaceutical industries and on sites where corrosion resistance sanitary properties are required.

Easy attachment and detachment

Changing the fixation method for the stainless steel knocker from the conventional bolt type to the ferrule clamp type allows the body to be easily detached from the container, which enables the daily cleaning in a short period of time.

Stainless steel body excellent in corrosion resistance

The stainless steel knocker consists of the body, standard base, mounting bolts and others, all of which are made of stainless steel material. It is suitable to install a site in food, chemical, and pharmaceutical industries and a site where corrosion resistance and sanitation are required.

Small and lightweight providing wide range of applications

The body of stainless steel knocker RKVS15-F type is of very small size, 34mm in external diameter, 110mm in total height, and 430g in weight. It can be installed to a small powder container or a chute section that never been able to be installed, and can facilitate the prevention of blockage every corners of facilities.

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

Small size models of RKVS15 and RKVS20 employ the directionally-adjustable push one joint that can be easily removed. As a tube mounted to the models, small-diameter tube is employed for easy routing, instead of the tube with an external diameter of 8mm for the conventional models. (An external diameter of 4mm for RKVS15, and 6mm for RKVS20)
The kits for which RKVS15 and RKVS20 can be used in the conventional controller with a discharge opening diameter of 8mm are attached respectively.

Adjustable impact force

In the air stainless steel knocker series, just changing the pressure of supply air allows the impact force to be changed by the special mushroom valve (patented). The air pressure is increased if the blockage cannot be eliminated, and is decreased if the impact force is too strong. Moreover, the adjustment of pressure is effective in reducing noise. Even if wrong selection of model results in excessive or poor capability during installation work, such a problem may be solved by adjusting the impact force. Thus, the adjustable impact force mechanism is appreciated in the field.

*The blue portion in the center is “mushroom valve”
RKV30PA

Relay piping allowing multiple units to be used simultaneously

Air relay knocker is equipped with relay piping function (patented) in which one control panel can operate more than one unit simultaneously. In the similar way, one controller or the control panel dedicated to knocker can use more than one unit. Thus, the introduction of relay piping will decrease the facility cost because the number of control panels in overall facilities can be reduced.
*For the combination of flow aid system, also refer to “The combination of flow aid system”

*Automatic control can be performed by attaching a solenoid valve (AG43-02-4-02G) before AOC-1B (air supply side).
*RKVS15 type does not support the relay piping.

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2. When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air knocker, also refer to “The operating principle of flow aid system”

The image is RKVS30

Simple structure and high durability

The stainless steel knocker series have durability supported by high design basis and have a simple structure, which provides almost maintenance-free performance and requires no additional spare parts. In long-term delivery record of this air stainless steel knocker series, customers have appreciated its maintenance-free performance with almost no failure.

Exhaust filter included as standard equipment

The stainless steel knocker is equipped with the stainless steel filter at the exhaust port that removes the dust that may be mixed in the exhaust air.

Outdoor exhaust by extending the exhaust piping

Because the stainless steel knocker is oil free, it can be used in a clean room. If exhaust air becomes a problem in the field, the exhaust air can be discharged outside of the clean room through an extended tube because the exhaust hole of body is tapped. If the extended tube cannot be used, the dedicated filter is available. (Exhaust extension parts and filter are optional)

Various types of dedicated controllers for knockers are available

The dedicated control panel is available for operation of air knocker series and stainless steel knocker series. The control panels include the air operation controller AOC-1B type that can start operation readily without electric power, the timer control panel for solenoid valve control KSE1 type that controls the interval between impacts and the number of impacts, and the control panel HKE series, or the control panel EKE5000 with free input voltage specification from 100 to 240VAC. In addition, the fully air controlled control panel HKA5000A for explosion-proof area is available. （Option）

From left, AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

Stainless Steel Knocker (Ferrule type) Specifications

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15-F	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.94
RKVS20F	0.3-0.7	1-60	0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.9

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15-F	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	2.1
RKVS20F	44-102	1-60	0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	2.0

*The weight of bese is included.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	B	ΦC	D	E	F	G	H
RKVS20F	57	(122)	21.7	(47)	(91)	(100)	1/8	1/8

(Imperial System)

Model	ΦA	B	ΦC	D	E	F	G	H
RKVS20F	2.2	(4.8)	0.9	(1.9)	(3.6)	(3.9)	1/8	1/8

The post EXEN RKVS20F Stainless Steel Knocker (Ferrule Type) first appeared on Kouei Japan Trading | Get Quotation.

EXEN HKA5000A Control Panel (Air Knocker / Mini Blaster)

kvtpart — Sat, 19 Dec 2020 00:39:36 +0000

Products Made In Japan
Manufacturer: EXEN
Model: HKA5000A

Control panel with no power supply and with explosion-proof specification

This product is used for the following applications:

01Used for controlling knocker and Mini Blaster in the explosion-proof area in iron-making plant
02Used for controlling knocker in the resin pellet production line (explosion-proof area) in petrochemical plant

Features

This product is an operation panel that allows the operation and operation interval to be controlled with only air supply without power supply. This product can be used in the field with no power supply or in an explosion-proof area. For the combination of flow aid system, also refer to “Flow aid equipment combination”.

Adoption of air controlled method without power supply

The timer for controlling the operation interval and the control component (OR element) for switching the manual/automatic operation are pneumatically controlled without power supply. (Note that the operation interval is up to 180s)

Compliance with IP code 54

The product can be used indoors and outdoors including the field under adverse conditions (e.g., a great amount of dust).

Suitable for control in explosion-proof area

If the knocker is used in a special area where a dust explosion or a firing accident may occur, N2 (nitrogen) is used to prevent explosion accidents.

Manual/Automatic mode selectable

Manual/Automatic operation can be selected with the selection switch.

Multiple units can be used (HKA type)

Specification

HKA5000A

Model	Protection class	Power Supply	Timer’s Set Time	Working Pressure (MPa)	Number of the units can be operated	Weight (Kg)
HKA5000A	Drip watertight-type dustproof-structure protection level IP 44	Air control	ON timer: 10～180sec OFF timer: 0.1～30sec	0.3～0.7	RKVS15 10 Units RKV/S20P 8 Units RKV/D/S 30PA 8 Units RKV/D/S 40PA 6 Units RKV/D/S 60PA 6 Units RKV/D80PA 4 Units RKV/D100PA 4 Units	12.0

(Imperial System)

Model	Protection class	Power Supply	Timer’s Set Time	Working Pressure (PSI)	Number of the units can be operated	Weight (lb)
HKA5000A	IP44	Air control	ON timer: 10～180sec OFF timer: 0.1～30sec	43.5～101.5	RKVS15 10 Units RKV/S20P 8 Units RKV/D/S 30PA 8 Units RKV/D/S 40PA 6 Units RKV/D/S 60PA 6 Units RKV/D80PA 4 Units RKV/D100PA 4 Units	26.4

*Contact EXEN for manufacturing of special control panels other than above.

Dimensions, installation, control panel

Product dimensional drawings

The post EXEN HKA5000A Control Panel (Air Knocker / Mini Blaster) first appeared on Kouei Japan Trading | Get Quotation.

EXEN AOC-1B Control Panel (Air Knocker / Mini Blaster)

kvtpart — Sat, 19 Dec 2020 00:00:25 +0000

Products Made In Japan
Manufacturer: EXEN
Model: AOC-1B

Control panel allowing the number of impacts to be set only by pneumatic control

This product is used for the following applications:

01OPECON is used if RKV is less frequently used in the grain forage silo in aggregate plant
02Prevention of blockage in the recycle fuel (capsule of compressed wood) supply hopper
03Prevention of blockage in the glass cullet storage hopper

Features

OPECON (AOC-1B) air operation controller is the simplest control panel that allows the number of ON/OFF impacts of the relay knocker and Mini Blaster to be set only by pneumatic control, without electric connection and electric timer device.

Operable only by air supply

OPECON (AOC-1B) air operation control is a control panel that can be operated only by air supply. One-time operation of the manual valve in this equipment allows the relay knocker and Mini Blaster to be operated continuously without electric timer.

The simplest control panel

Pneumatic Operation Controller (Opecon AOC-1B) is a control panel that is convenient for easy continuous run by manual operation if, for example, takes time before electric work. It is an inexpensive and simple control panel that allows the air knocker to be operated only by pneumatic control.

Easy setting of time interval between impacts

The time interval between actuation of Air Operation Controller (AOC-1B) can be set with the control knob of the number of times for Air Operation Controller while knocker or blaster is actuated. Because the adjustment can be made during operation, the actuation time can be changed while the operation sound is heard.

One control panel (AOC-1B) can operate up to three knockers

Although one control panel can drive one air knocker in the conventional piping, it can drive up to three air knockers via relay piping. Thus, several air knockers mounted on the same hopper can be driven by one control panel, which reduces the expenses.
*For the combination of flow aid system, also refer to “Flow aid equipment combination”.

Indoor/outdoor use type with safe structure

OPECON (AOC-1B) can be used safely in any work environment regardless of indoors or outdoors.

Specification

AOC-1B

Model	Installation Scope	Power Supply (MSI)	Working Pressure (MPa)	Working Fluid Temperature (℃)	Working Times Per/min.	Approx. Dimension (LXWXH)(mm)	Weight (kg)
								AOC-1B	Indoor,Outdoor	Air Control	0.3-0.7	5-50	12-60	171X67X200	1.4

（Imperial System）

Model	Installation Scope	Power Supply (MSI)	Working Pressure (PSI)	Working Fluid Temperature (°F)	Working Times Per/min.	Approx. Dimension (LXWXH)(Inch)	Weight (ib)
								AOC-1B	Indoor,Outdoor	Air Control	44-102	41-122	12-60	(6-47/64 x 2-41/64 x 8-17/64)	3.1

*There may be a variation in the number of actuations because this product is pneumatically controlled.

Dimensions, installation, control panel

Product dimensional drawings

The post EXEN AOC-1B Control Panel (Air Knocker / Mini Blaster) first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS15-F Stainless Steel Knocker (Ferrule Type)

kvtpart — Fri, 18 Dec 2020 23:25:15 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS15-F

Easy attachment/detachment! Sanitary support ferrule clamp type knocker

This product is used for the following applications:

01Installation for preventing clogging in the SUS hopper in the pharmaceutical factory
02Prevention of adhesion of ceramic material in the hopper

Features

Easy attachment and detachment

Stainless steel body excellent in corrosion resistance

Small and lightweight providing wide range of applications

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

Adjustable impact force

*The blue portion in the center is “mushroom valve”
RKV30PA

Relay piping allowing multiple units to be used simultaneously

*Automatic control can be performed by attaching a solenoid valve (AG43-02-4-02G) before AOC-1B (air supply side).
*RKVS15 type does not support the relay piping.

Operating principle of Air knocker

The image is RKVS30

Simple structure and high durability

Exhaust filter included as standard equipment

The stainless steel knocker is equipped with the stainless steel filter at the exhaust port that removes the dust that may be mixed in the exhaust air.

Outdoor exhaust by extending the exhaust piping

Various types of dedicated controllers for knockers are available

From left, AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

Stainless Steel Knocker (Ferrule type) Specifications

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15-F	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.94
RKVS20F	0.3-0.7	1-60	0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.9

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15-F	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	2.1
RKVS20F	44-102	1-60	0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	2.0

*The weight of bese is included.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	B	ΦC	D	E	F	G	H
RKVS15-F	34	(151)	21.7	(26)	(91)	(100)	1/8	1/8

(Imperial System)

Model	ΦA	B	ΦC	D	E	F	G	H
RKVS15-F	1.3	(5.9)	0.9	(1.0)	(3.6)	(3.9)	1/8	1/8

The post EXEN RKVS15-F Stainless Steel Knocker (Ferrule Type) first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS60 Stainless Steel Knocker

kvtpart — Fri, 18 Dec 2020 07:30:24 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS60

Recommendation for food, medical, and chemical industries. Automatic hammering equipment for blockage prevention

This product is used for the following applications:

01• In the factory of drinking water manufacture: RKVS installed to prevent the clogging of tea leaves in SUS trough
02Elimination of adhesion on wall surface in the coffee bean roasting machine
03Elimination of ratholing in resin pellet hopper
01Improvement of ejection of film materials
02Elimination of salt clogging
03Elimination of sugar clogging

Features

Stainless steel body excellent in corrosion resistance

Adjustable impact force

*The blue portion in the center is “mushroom valve”

Relay piping allowing multiple units to be used simultaneously

Air knocker is equipped with relay piping function (patented) in which one control panel can operate more than one unit simultaneously. In the similar way, one controller or the control panel dedicated to knocker can use more than one unit. Thus, the introduction of relay piping will decrease the facility cost because the number of control panels in overall facilities can be reduced.
*For the combination of flow aid system, also refer to “The combination of flow aid system”

*Automatic control can be performed by attaching a solenoid valve (AG43-02-4-02G) before AOC-1B (air supply side).
*N2 tube size
RKVS30・40・60：Φ8XΦ6
*RKVS15 type does not support the relay piping.

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2.When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air relay knocker, also refer to “The operating principle of flow aid system”

RKVS30

Reduction in size and weight providing wide range of applications

The body of stainless steel knocker RKVS15 type is of very small size, 34mm in external diameter, 110mm in total height, and 430g in weight. It can be installed to a small powder container or a chute section that never been able to be installed, and can facilitate the prevention of blockage every corners of facilities.

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

※RKV20 / Opecon / Push one joint

Simple structure and high durability

Installable depending on the container condition (RKVS15 type)

The air stainless steel knocker RKVS15 type can be installed with one bolt (M10). Therefore, it can be installed on your idea such as installation with the dedicated stay bracket, with no knocker mounting stay provided on the container or with no soldering of container.

Support for attachment of exhaust filter and extension of exhaust position

Various types of dedicated controllers for knockers are available

From left、AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

RKVS

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.43
RKVS20			0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.8
RKVS30			0.05-0.13	5.5-13.1	1.2-1.8	Below1.0	1.6
RKVS40			0.15-0.37	9.2-22.3	2.6-4.0	1.0-1.5	4.2
RKVS60			0.33-0.77	20.6-49.0	6.9-10.6	1.5-3.0	10.4

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	0.9
RKVS20			0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	1.8
RKVS30			0.002-0.005	4.1-9.7	8.7-13.0	Below1.0	3.5
RKVS40			0.005-0.013	6.8-16.4	18.8-28.9	1.0-1.5	9.3
RKVS60			0.012-0.027	15.2-36.1	49.9-76.7	1.5-3.0	22.9

*The dimensions of stainless steel knocker are the same as those of relay knocker.
*The weight includes that of base.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube size
RKVS60	115	138	14	Rp1/8	183	(25)	14.5	110	15	80	125	76	Rp3/8	(196)	Φ8XΦ6

(Imperial System)

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube size
RKVS60	4.5	5.4	0.6	Rp1/8	7.2	(1.0)	0.6	4.3	0.6	3.1	4.9	3.0	Rp3/8	(7.7)	Φ8XΦ6 mm

Installation method

Tightening torque table(mm) 　Unit: N·m

The post EXEN RKVS60 Stainless Steel Knocker first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS40 Stainless Steel Knocker

kvtpart — Fri, 18 Dec 2020 07:05:29 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS40

Recommendation for food, medical, and chemical industries. Automatic hammering equipment for blockage prevention

This product is used for the following applications:

01• In the factory of drinking water manufacture: RKVS installed to prevent the clogging of tea leaves in SUS trough
02Elimination of adhesion on wall surface in the coffee bean roasting machine
03Elimination of ratholing in resin pellet hopper
01Improvement of ejection of film materials
02Elimination of salt clogging
03Elimination of sugar clogging

Features

Stainless steel body excellent in corrosion resistance

Adjustable impact force

*The blue portion in the center is “mushroom valve”

Relay piping allowing multiple units to be used simultaneously

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2.When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air relay knocker, also refer to “The operating principle of flow aid system”

RKVS30

Reduction in size and weight providing wide range of applications

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

※RKV20 / Opecon / Push one joint

Simple structure and high durability

Installable depending on the container condition (RKVS15 type)

Support for attachment of exhaust filter and extension of exhaust position

Various types of dedicated controllers for knockers are available

From left、AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

RKVS

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.43
RKVS20			0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.8
RKVS30			0.05-0.13	5.5-13.1	1.2-1.8	Below1.0	1.6
RKVS40			0.15-0.37	9.2-22.3	2.6-4.0	1.0-1.5	4.2
RKVS60			0.33-0.77	20.6-49.0	6.9-10.6	1.5-3.0	10.4

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	0.9
RKVS20			0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	1.8
RKVS30			0.002-0.005	4.1-9.7	8.7-13.0	Below1.0	3.5
RKVS40			0.005-0.013	6.8-16.4	18.8-28.9	1.0-1.5	9.3
RKVS60			0.012-0.027	15.2-36.1	49.9-76.7	1.5-3.0	22.9

*The dimensions of stainless steel knocker are the same as those of relay knocker.
*The weight includes that of base.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	57	57	6.5	Rp1/8	70	(26)	6.5	44	6	28	–	22	Rp1/8	–	Φ6XΦ4
RKVS30	66	70	8		95	(25)	8.5	55	8	35		27	Rp1/4		Φ8XΦ6
RKVS40	86	95	12		140	(25)	12.5	70	13	60		34	Rp1/4		Φ8XΦ6

(Imperial System)

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	2.2	2.2	0.3	Rp1/8	2.8	(1.0)	0.3	1.7	0.2	1.1	–	0.9	Rp1/8	–	Φ6XΦ4 mm
RKVS30	2.6	2.8	0.3		3.7	(1.0)	0.3	2.2	0.3	1.4		1.1	Rp1/4		Φ8XΦ6 mm
RKVS40	3.4	3.7	0.5		5.5	(1.0)	0.5	2.8	0.5	2.4		1.3	Rp1/4		Φ8XΦ6 mm

Product dimensional drawings

The post EXEN RKVS40 Stainless Steel Knocker first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS30 Stainless Steel Knocker

kvtpart — Fri, 18 Dec 2020 06:00:26 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS30

Recommendation for food, medical, and chemical industries. Automatic hammering equipment for blockage prevention

This product is used for the following applications:

01• In the factory of drinking water manufacture: RKVS installed to prevent the clogging of tea leaves in SUS trough
02Elimination of adhesion on wall surface in the coffee bean roasting machine
03Elimination of ratholing in resin pellet hopper
01Improvement of ejection of film materials
02Elimination of salt clogging
03Elimination of sugar clogging

Features

Stainless steel body excellent in corrosion resistance

Adjustable impact force

*The blue portion in the center is “mushroom valve”

Relay piping allowing multiple units to be used simultaneously

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2.When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air relay knocker, also refer to “The operating principle of flow aid system”

RKVS30

Reduction in size and weight providing wide range of applications

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

※RKV20 / Opecon / Push one joint

Simple structure and high durability

Installable depending on the container condition (RKVS15 type)

Support for attachment of exhaust filter and extension of exhaust position

Various types of dedicated controllers for knockers are available

From left、AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

RKVS

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.43
RKVS20			0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.8
RKVS30			0.05-0.13	5.5-13.1	1.2-1.8	Below1.0	1.6
RKVS40			0.15-0.37	9.2-22.3	2.6-4.0	1.0-1.5	4.2
RKVS60			0.33-0.77	20.6-49.0	6.9-10.6	1.5-3.0	10.4

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	0.9
RKVS20			0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	1.8
RKVS30			0.002-0.005	4.1-9.7	8.7-13.0	Below1.0	3.5
RKVS40			0.005-0.013	6.8-16.4	18.8-28.9	1.0-1.5	9.3
RKVS60			0.012-0.027	15.2-36.1	49.9-76.7	1.5-3.0	22.9

*The dimensions of stainless steel knocker are the same as those of relay knocker.
*The weight includes that of base.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	57	57	6.5	Rp1/8	70	(26)	6.5	44	6	28	–	22	Rp1/8	–	Φ6XΦ4
RKVS30	66	70	8		95	(25)	8.5	55	8	35		27	Rp1/4		Φ8XΦ6
RKVS40	86	95	12		140	(25)	12.5	70	13	60		34	Rp1/4		Φ8XΦ6

(Imperial System)

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	2.2	2.2	0.3	Rp1/8	2.8	(1.0)	0.3	1.7	0.2	1.1	–	0.9	Rp1/8	–	Φ6XΦ4 mm
RKVS30	2.6	2.8	0.3		3.7	(1.0)	0.3	2.2	0.3	1.4		1.1	Rp1/4		Φ8XΦ6 mm
RKVS40	3.4	3.7	0.5		5.5	(1.0)	0.5	2.8	0.5	2.4		1.3	Rp1/4		Φ8XΦ6 mm

Product dimensional drawings

The post EXEN RKVS30 Stainless Steel Knocker first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS20 Stainless Steel Knocker

kvtpart — Fri, 18 Dec 2020 04:58:09 +0000

Products Made In Japan
Manufacturer: EXEN
Model: RKVS20

Recommendation for food, medical, and chemical industries. Automatic hammering equipment for blockage prevention

This product is used for the following applications:

01• In the factory of drinking water manufacture: RKVS installed to prevent the clogging of tea leaves in SUS trough
02Elimination of adhesion on wall surface in the coffee bean roasting machine
03Elimination of ratholing in resin pellet hopper
01Improvement of ejection of film materials
02Elimination of salt clogging
03Elimination of sugar clogging

Features

Stainless steel body excellent in corrosion resistance

Adjustable impact force

*The blue portion in the center is “mushroom valve”

Relay piping allowing multiple units to be used simultaneously

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2.When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air relay knocker, also refer to “The operating principle of flow aid system”

RKVS30

Reduction in size and weight providing wide range of applications

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

※RKV20 / Opecon / Push one joint

Simple structure and high durability

Installable depending on the container condition (RKVS15 type)

Support for attachment of exhaust filter and extension of exhaust position

Various types of dedicated controllers for knockers are available

From left、AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

RKVS

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.43
RKVS20			0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.8
RKVS30			0.05-0.13	5.5-13.1	1.2-1.8	Below1.0	1.6
RKVS40			0.15-0.37	9.2-22.3	2.6-4.0	1.0-1.5	4.2
RKVS60			0.33-0.77	20.6-49.0	6.9-10.6	1.5-3.0	10.4

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	0.9
RKVS20			0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	1.8
RKVS30			0.002-0.005	4.1-9.7	8.7-13.0	Below1.0	3.5
RKVS40			0.005-0.013	6.8-16.4	18.8-28.9	1.0-1.5	9.3
RKVS60			0.012-0.027	15.2-36.1	49.9-76.7	1.5-3.0	22.9

*The dimensions of stainless steel knocker are the same as those of relay knocker.
*The weight includes that of base.

Dimensions, installation, control panel

Product dimensional table

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	57	57	6.5	Rp1/8	70	(26)	6.5	44	6	28	–	22	Rp1/8	–	Φ6XΦ4
RKVS30	66	70	8		95	(25)	8.5	55	8	35		27	Rp1/4		Φ8XΦ6
RKVS40	86	95	12		140	(25)	12.5	70	13	60		34	Rp1/4		Φ8XΦ6

(Imperial System)

Model	ΦA	ΦC	D	G	H	I	ΦJ	ΦK	L	M	M´	ΦN	O	P	Tube Size
RKVS20	2.2	2.2	0.3	Rp1/8	2.8	(1.0)	0.3	1.7	0.2	1.1	–	0.9	Rp1/8	–	Φ6XΦ4 mm
RKVS30	2.6	2.8	0.3		3.7	(1.0)	0.3	2.2	0.3	1.4		1.1	Rp1/4		Φ8XΦ6 mm
RKVS40	3.4	3.7	0.5		5.5	(1.0)	0.5	2.8	0.5	2.4		1.3	Rp1/4		Φ8XΦ6 mm

Product dimensional drawings

The post EXEN RKVS20 Stainless Steel Knocker first appeared on Kouei Japan Trading | Get Quotation.

EXEN RKVS15 Stainless Steel Knocker

kvtpart — Fri, 18 Dec 2020 00:45:15 +0000

Products Made In Japan
Manufacturer: EXEN
Model: UT612

Recommendation for food, medical, and chemical industries. Automatic hammering equipment for blockage prevention

This product is used for the following applications:

01• In the factory of drinking water manufacture: RKVS installed to prevent the clogging of tea leaves in SUS trough
02Elimination of adhesion on wall surface in the coffee bean roasting machine
03Elimination of ratholing in resin pellet hopper
01Improvement of ejection of film materials
02Elimination of salt clogging
03Elimination of sugar clogging

Features

Stainless steel body excellent in corrosion resistance

Adjustable impact force

*The blue portion in the center is “mushroom valve”

Relay piping allowing multiple units to be used simultaneously

Operating principle of Air knocker

1.The compressed air flowed into the knocker is first supplied to the valve chamber to depress the mushroom valve and then is stored in the accumulator.
2.When the three-way valve is actuated to exhaust the air from the valve chamber, the compressed air in the accumulator moves the mushroom valve upward.
3.When the mushroom valve moves, the compressed air in the accumulator depresses the piston energetically, which strikes the base surface. That impact force eliminates the adhesion or blockage of powder.
*For the operating principle of air relay knocker, also refer to “The operating principle of flow aid system”

RKVS30

Reduction in size and weight providing wide range of applications

Adoption of directionally-adjustable and removable push one joint (only for RKVS20 or lower)

※RKV20 / Opecon / Push one joint

Simple structure and high durability

Installable depending on the container condition (RKVS15 type)

Support for attachment of exhaust filter and extension of exhaust position

Various types of dedicated controllers for knockers are available

From left、AOC-1B／KSE1／HKE1100A／HKE5100／EKE5000／HKA5000A

Specification

RKVS

Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	Impulsive Force		Weight (kg)
Model	Working Pressure (MPa)	Stroke Cycle (time/min)	Air Consumption (L/time)(ANR)	Stroke Energy (N・m)	(kg・m/s)	Hammer pound (lb)	Weight (kg)
RKVS15	0.3-0.7	1-60	0.03-0.06	2.7-5.9	0.3-0.5	Mini Hammer	0.43
RKVS20			0.04-0.10	4.3-8.3	0.6-0.8	Below0.6	0.8
RKVS30			0.05-0.13	5.5-13.1	1.2-1.8	Below1.0	1.6
RKVS40			0.15-0.37	9.2-22.3	2.6-4.0	1.0-1.5	4.2
RKVS60			0.33-0.77	20.6-49.0	6.9-10.6	1.5-3.0	10.4

(Imperial System)

Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	Impulsive Force		Weight (lb)
Model	Working Pressure (PSI)	Stroke Cycle (time/min)	Air Consumption (cf/time)	Stroke Energy (lbf・ft)	ft・lbf/s	Converts into Hammer pound (lb)	Weight (lb)
RKVS15	44-102	1-60	0.001-0.002	2.0-4.4	2.2-3.6	Mini Hammer	0.9
RKVS20			0.001-0.004	3.2-6.1	4.3-5.8	Below0.6	1.8
RKVS30			0.002-0.005	4.1-9.7	8.7-13.0	Below1.0	3.5
RKVS40			0.005-0.013	6.8-16.4	18.8-28.9	1.0-1.5	9.3
RKVS60			0.012-0.027	15.2-36.1	49.9-76.7	1.5-3.0	22.9

*The dimensions of stainless steel knocker are the same as those of relay knocker.
*The weight includes that of base.

Dimensions, installation, control panel

Product dimensional drawings

Product dimensional table

Model	ΦA	G	H	Ｉ	O	Tube size
RKVS15	34	Rp1/8	86	(24)	Rp1/8	Φ4XΦ2

(Imperial System)

Model	ΦA	G	H	Ｉ	O	Tube size
RKVS15	1.3	Rp1/8	3.4	(0.9)	Rp1/8	Φ4XΦ2 mm

The post EXEN RKVS15 Stainless Steel Knocker first appeared on Kouei Japan Trading | Get Quotation.

Seiwa E19-CP-2SA Magnetic Field probe EMC Products

kvt part2 — Fri, 30 Oct 2020 14:58:22 +0000

Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: E19-CP-2SA

Feature

• Available for specification of the noise source.
• IEC61967-6 compliant.
• Shielded loop coil structure.
• Available for NEC Engineering’s EMC visualize system.

Specification

Example of noise visualization measurementExample of connecting measuring equipment

Kouei is Distributor/Agent of Seiwa.
Other items of Seiwa.
Request the quotation for Seiwa.

The post Seiwa E19-CP-2SA Magnetic Field probe EMC Products first appeared on Kouei Japan Trading | Get Quotation.

Seiwa Thermal Barrier Sheet ( Mirror Star) EMC Products

kvt part2 — Fri, 30 Oct 2020 14:49:26 +0000

Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: Thermal Barrier Sheet ( Mirror Star)

Patent-Pending Technology

To reduce the internal temperature rise caused by solar radiation

Feature

• Easy to stick and Reworkable.
• This product does not use glue, so the adhesive surface is not contaminated.
• High solar reflectance and high weather resistance
• Using Thermal Barrier Paint made in Seiwa : E18X-S150 series
• Can be cheaper than installing with Thermal Barrier Paints.
• Made from eco-friendly acrylic resin and PET.

Applications

Outdoor control panels
communication repeaters
power storage devices, etc.

Specification

Characteristic

Kouei is Distributor/Agent of Seiwa.
Other items of Seiwa.
Request the quotation for Seiwa.

The post Seiwa Thermal Barrier Sheet ( Mirror Star) EMC Products first appeared on Kouei Japan Trading | Get Quotation.

Seiwa E18X-D100 Electromagnetic Wave Control Sheet EMC Products

kvt part2 — Fri, 30 Oct 2020 14:42:24 +0000

Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: E18X-D100

Product Outline and Features

• It has excellent heat shielding and insulation performance.
• It is applicable to use outside because high weatherability and adhesion.

Heat Shielding Performance

Kouei is Distributor/Agent of Seiwa.
Other items of Seiwa.
Request the quotation for Seiwa.

The post Seiwa E18X-D100 Electromagnetic Wave Control Sheet EMC Products first appeared on Kouei Japan Trading | Get Quotation.

Seiwa E18X-SD150 Electromagnetic Wave Control Sheet EMC Products

kvt part2 — Fri, 30 Oct 2020 14:08:56 +0000

Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: E18X-SD150

Product Outline and Features

• It has excellent heat shielding and insulation performance.
• It is applicable to use outside because high weatherability and adhesion.

Heat Shielding Performance

Kouei is Distributor/Agent of Seiwa.
Other items of Seiwa.
Request the quotation for Seiwa.

The post Seiwa E18X-SD150 Electromagnetic Wave Control Sheet EMC Products first appeared on Kouei Japan Trading | Get Quotation.

Seiwa E18X-S150 Electromagnetic Wave Control Sheet EMC Products

kvt part2 — Fri, 30 Oct 2020 14:08:54 +0000

Made in Japan
Manufacturer: SEIWA ELECTRIC MFG.CO.,LTD
Model: E18X-S150

Product Outline and Features

• It has excellent heat shielding and insulation performance.
• It is applicable to use outside because high weatherability and adhesion.

Heat Shielding Performance

Kouei is Distributor/Agent of Seiwa.
Other items of Seiwa.
Request the quotation for Seiwa.

The post Seiwa E18X-S150 Electromagnetic Wave Control Sheet EMC Products first appeared on Kouei Japan Trading | Get Quotation.

Air Knocker | Kouei Japan Trading | Get Quotation

EXEN RKD60PA Relay Knocker (Direct Type)

It has been used in this way

Features

Dimensions, installation and operation panel

Product dimension diagram

High strength adoption improves durability

Operating principle of relay knocker

Specification

Product dimension table

Installation method

Koganei Large Flow Series Air Operated Valve F-AVP500, 750

Features

Specifications

Urakawa ZTN35×60 ZTN Series JEC and JEM certified products

Features

Specifications

Table 1

“Example Circuit”

Urakawa ZTC40B×85-09A02003 ZTC Series EN, UL Certified Products

Features

Specifications

EN61558-2-4 Class I Three-Phase Certified Product

Diagram A

Diagram B

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Urakawa ZTC40B×70-09A02002 ZTC Series EN, UL Certified Products

Features

Specifications

EN61558-2-4 Class I Three-Phase Certified Product

Diagram A

Diagram B

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Urakawa ZTC40B×59-09A02001 ZTC Series EN, UL Certified Products

Features

Specifications

EN61558-2-4 Class I Three-Phase Certified Product

Diagram A

Diagram B

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Urakawa ZTC40B×48-09A02000 ZTC Series EN, UL Certified Products

Features

Specifications

EN61558-2-4 Class I Three-Phase Certified Product

Diagram A

Diagram B

EN61558-2-4 Class I Certified Product Circuit Diagram and Voltage Combination Examples

EN61558-2-4 Class I Certified Product Input-Output Voltage Combination Examples

Urakawa ZTE80×225-09A10012 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

Circuit Example

Urakawa ZTE80×175-09A10011 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

Circuit Example

Urakawa ZTE70×165-09A10010 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

Circuit Example

Urakawa ZTE160×120-09A10004 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

Circuit Example

Urakawa ZTE160×105-09A10002 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

Circuit Example

Urakawa ZTN60×92-60061 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

EN Standard Certified Product Circuit

Urakawa ZTN60×77-60060 ZTN, ZTE Series EN, UL Certified Products

Features

Specifications

EN Standard Certified Product Circuit

Urakawa ZTN60×62-60059 ZTN, ZTE Series EN, UL Certified Products