Daikoken Heat Co. | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Sat, 17 Jan 2026 05:23:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.5 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png Daikoken Heat Co. | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 Daikoken Heat Two-side blowing nozzle BowNozzle https://koueitrading.com/global/product/daikoken-heat-two-side-blowing-nozzle-bownozzle/ Fri, 25 Dec 2020 00:13:43 +0000 https://koueitrading.com/global/?post_type=product&p=180290 Manufacturer: Daikoken Heat Co., Ltd. Features  With the development of the bow nozzle, it is now possible to arrange nozzles in an ideal position as shown above for processing flat materials (such as film, metal plates, resin sheets, paper, glass, printed materials, etc.) in operations such as water removal, drying, and heating. Model Spray width […]

The post Daikoken Heat Two-side blowing nozzle BowNozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features 

  • With the development of the bow nozzle, it is now possible to arrange nozzles in an ideal position as shown above for processing flat materials (such as film, metal plates, resin sheets, paper, glass, printed materials, etc.) in operations such as water removal, drying, and heating.
Model Spray width Outlet type Inlet
BOW-100 100 mm Multi-slot type φ50, φ65
BOW-200 200 mm Multi-slot type φ75

Specifications

BOW-100 Dimensions

 

BOW-200 Dimensions

The post Daikoken Heat Two-side blowing nozzle BowNozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat S-1 Series Hot Air Generation Heater https://koueitrading.com/global/product/daikoken-heat-s-1-series-hot-air-generation-heater-2/ Thu, 24 Dec 2020 00:59:11 +0000 https://koueitrading.com/global/?post_type=product&p=180289 Manufacturer: Daikoken Heat Co., Ltd. Model: S-1 Series Features By connecting to high-pressure air such as from a compressor, stable hot air can be obtained from room temperature up to 800°C. Model Lineup S-1-800 S-1-1000 S-1-1600 S-1-2000 Construction / Materials Casing: SUS304 Internal structure: Heat-resistant Ni-Cr wire, ceramic Allowable operating pressure: Max. 0.2 MPa (2 […]

The post Daikoken Heat S-1 Series Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: S-1 Series

Features

  • By connecting to high-pressure air such as from a compressor, stable hot air can be obtained from room temperature up to 800°C.

Model Lineup

  • S-1-800
  • S-1-1000
  • S-1-1600
  • S-1-2000

Construction / Materials

  • Casing: SUS304
  • Internal structure: Heat-resistant Ni-Cr wire, ceramic
  • Allowable operating pressure: Max. 0.2 MPa (2 kg/cm²)

Specifications

Item S-1-800 S-1-1000 S-1-1600 S-1-2000
Heater capacity 800 W 1 kW 1.6 kW 2 kW
Power supply Single-phase 100 V Single-phase 100 V Single-phase 200 V Single-phase 200 V
Continuous operating temperature range Normal to 800°C (max inlet air temperature 40°C)
Minimum required air flow (NL/min) 45 57 90 114
Air inlet / outlet port Inlet: PS 1/4″ (female) / Outlet: PT 1/4″ (male)
Temperature sensor port PS 1/8″ (female)
Reference weight (g) 450 570 600 760
Recommended temperature controller TCN5-Z
The post Daikoken Heat S-1 Series Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat LH series Heater for hot air generation https://koueitrading.com/global/product/daikoken-heat-lh-series-heater-for-hot-air-generation-lh-series/ Thu, 24 Dec 2020 00:51:25 +0000 https://koueitrading.com/global/?post_type=product&p=180288 Manufacturer: Daikoken Heat Co., Ltd. Model: LH series Features Easy maintenance during heater replacement Suitable for use with high-flow and low-flow fluids Heating of flammable gases can also be performed under oxygen-free conditions Model Types Standard Specification (Pressure resistance: 0.5 MPa) LH-4 (3 kW) LH-5 (4 kW) LH-6 (5 kW) LH-7 (6 kW) LH-8 (7 […]

The post Daikoken Heat LH series Heater for hot air generation first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: LH series

Features

  • Easy maintenance during heater replacement
  • Suitable for use with high-flow and low-flow fluids
  • Heating of flammable gases can also be performed under oxygen-free conditions

Model Types

Standard Specification (Pressure resistance: 0.5 MPa)

  • LH-4 (3 kW)
  • LH-5 (4 kW)
  • LH-6 (5 kW)
  • LH-7 (6 kW)
  • LH-8 (7 kW)
  • LH-9 (8 kW)
  • LH-10 (9 kW)
  • LH-11 (10 kW)
  • LH-12 (12 kW)
  • LH-13 (15 kW)
  • LH-14 (20 kW)
  • LH-15 (25 kW)

High-Pressure Specification (Pressure resistance: 1.0 MPa)

  • LH-4-1MPa (3 kW)
  • LH-5-1MPa (4 kW)
  • LH-6-1MPa (5 kW)
  • LH-7-1MPa (6 kW)
  • LH-8-1MPa (7 kW)
  • LH-9-1MPa (8 kW)
  • LH-10-1MPa (9 kW)
  • LH-11-1MPa (10 kW)
  • LH-12-1MPa (12 kW)
  • LH-13-1MPa (15 kW)
  • LH-14-1MPa (20 kW)
  • LH-15-1MPa (25 kW)

Power Supply / Voltage:

  • 3-phase, 200 V

Maximum Inlet Fluid Temperature:

  • 40°C

Operating Temperature:

  • Maximum: 500°C
  • Normal: 300°C

Main Body Material:

  • SUS304

Heater Element:

  • SUS321

Specifications

 

 

The post Daikoken Heat LH series Heater for hot air generation first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat DIS series for high-pressure blowers https://koueitrading.com/global/product/daikoken-heat-dis-series-for-high-pressure-blowers/ Fri, 18 Dec 2020 02:15:19 +0000 https://koueitrading.com/global/?post_type=product&p=177877 Manufacturer: Daikoken Heat Co., Ltd. Model: DIS series Features The internal air passage in the jet-nozzle section narrows in a special tapered shape, so the air passing through the nozzle is discharged while accelerating. Because the accelerated air has a low rate of velocity drop, it can deliver strong airflow to distant points.Especially effective when […]

The post Daikoken Heat DIS series for high-pressure blowers first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: DIS series

Features

  • The internal air passage in the jet-nozzle section narrows in a special tapered shape, so the air passing through the nozzle is discharged while accelerating.
  • Because the accelerated air has a low rate of velocity drop, it can deliver strong airflow to distant points.
    Especially effective when strong air blowing is required, or when there is a distance between the workpiece and the nozzle outlet.
The post Daikoken Heat DIS series for high-pressure blowers first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat DIX series for compressors https://koueitrading.com/global/product/daikoken-heat-dix-series-for-compressors/ Fri, 18 Dec 2020 02:12:06 +0000 https://koueitrading.com/global/?post_type=product&p=177876 Manufacturer: Daikoken Heat Co., Ltd. Model: DIX series Features  

The post Daikoken Heat DIX series for compressors first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: DIX series

Features

 

The post Daikoken Heat DIX series for compressors first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat HAX Series Hot Air Nozzle https://koueitrading.com/global/product/daikoken-heat-hax-series-hot-air-nozzle/ Fri, 18 Dec 2020 01:59:17 +0000 https://koueitrading.com/global/?post_type=product&p=177875 Manufacturer: Daikoken Heat Co., Ltd. Model: HAX Series Features This series is available in a standard type with a maximum hot-air temperature of 200°C, and an R type with a maximum of 500°C. Because the heater is a cartridge type, even if you want to change the heater capacity later, you can easily replace it […]

The post Daikoken Heat HAX Series Hot Air Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: HAX Series

Features

  • This series is available in a standard type with a maximum hot-air temperature of 200°C, and an R type with a maximum of 500°C.
  • Because the heater is a cartridge type, even if you want to change the heater capacity later, you can easily replace it with a one-touch swap.
  • The main body material is SUS304, and the heating element uses nichrome wire or Kanthal wire. Thanks to the special internal design, it provides a high heat-exchange efficiency and offers excellent durability even when used at high temperatures.

Specifications

Standard type (MAX. 200°C)

Model Slit length (mm) Slit width (mm) Heater capacity (kW) Power supply
HAX-200 200 0.2 0.8 Single-phase 100 V
HAX-250 250 0.2 1.0 Single-phase 100 V
HAX-300 300 0.2 1.0 Single-phase 100 V
HAX-350 350 0.2 1.6 Single-phase 200 V
HAX-400 400 0.2 2.0 Single-phase 200 V

 

High-temperature R type (MAX. 500°C)

Model Slit length (mm) Slit width (mm) Heater capacity (kW) Power supply
HAX-200R 201 0.15 0.8 Single-phase 100 V
HAX-260R 261 0.15 1.0 Single-phase 100 V
HAX-300R 301 0.15 1.0 Single-phase 100 V
HAX-360R 361 0.15 1.6 Single-phase 200 V
HAX-400R 401 0.15 2.0 Single-phase 200 V
The post Daikoken Heat HAX Series Hot Air Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SQ Series Flat Injection https://koueitrading.com/global/product/daikoken-heat-sq-series-flat-injection/ Fri, 18 Dec 2020 01:51:13 +0000 https://koueitrading.com/global/?post_type=product&p=177874 Manufacturer: Daikoken Heat Co., Ltd. Model: PGO-91&91G Features It is a surface (sheet) jet nozzle in which many small-diameter outlet holes are arranged in rows at equal intervals on the discharge surface. From each hole, you can obtain a uniform air velocity, and also hot air with an even (uniform) temperature.

The post Daikoken Heat SQ Series Flat Injection first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: PGO-91&91G

Features

  • It is a surface (sheet) jet nozzle in which many small-diameter outlet holes are arranged in rows at equal intervals on the discharge surface.
  • From each hole, you can obtain a uniform air velocity, and also hot air with an even (uniform) temperature.

The post Daikoken Heat SQ Series Flat Injection first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Bow Two-side blowing nozzle Nozzle https://koueitrading.com/global/product/daikoken-heat-bow-two-side-blowing-nozzle-nozzle/ Fri, 18 Dec 2020 00:45:33 +0000 https://koueitrading.com/global/?post_type=product&p=178089 Manufacturer: Daikoken Heat Co., Ltd. Model: Bow Features This series offers nozzles for high-pressure applications in two sizes: 100 mm and 200 mm widths. Nozzle Types BOW-100: 100 mm width BOW-200: 200 mm width

The post Daikoken Heat Bow Two-side blowing nozzle Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: Bow

Features

  • This series offers nozzles for high-pressure applications in two sizes: 100 mm and 200 mm widths.

Nozzle Types

  • BOW-100: 100 mm width

  • BOW-200: 200 mm width

The post Daikoken Heat Bow Two-side blowing nozzle Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat LDN to LDLX series High-precision lip-type https://koueitrading.com/global/product/daikoken-heat-ldn-to-ldlx-series-high-precision-lip-type/ Fri, 18 Dec 2020 00:34:54 +0000 https://koueitrading.com/global/?post_type=product&p=178088 Manufacturer: Daikoken Heat Co., Ltd. Model: LDN to LDLX series This is a nozzle with a lip attached to one side of the square flow distribution. It can be used in other gases and liquids with high viscosity, and the shape can be stabilized. Specifications Nozzle Model Slotted Length Slotted Width Inlet Connection LDN-100 100 […]

The post Daikoken Heat LDN to LDLX series High-precision lip-type first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: LDN to LDLX series

  • This is a nozzle with a lip attached to one side of the square flow distribution.
  • It can be used in other gases and liquids with high viscosity, and the shape can be stabilized.

Specifications

Nozzle Model Slotted Length Slotted Width Inlet Connection
LDN-100 100 mm 0.3 mm PT1 (External) Multiple Installations Allowed
LDN-150 150 mm 0.6 mm PT1 (External) Multiple Installations Allowed
LDN-200 200 mm 0.8 mm PT1 (External) Multiple Installations Allowed
LDM-250 250 mm 0.6 mm PT1 ¼ (External) Multiple Installations Allowed
LDM-300 300 mm 0.6 mm PT1 ¼ (External) Multiple Installations Allowed
LDM-350 350 mm 0.6 mm PT1 ¼ (External) Multiple Installations Allowed
LDM-400 400 mm 0.6 mm PT1 ¼ (External) Multiple Installations Allowed
LDM-500 500 mm 0.6 mm PT1 ¼ (External) Multiple Installations Allowed
LDL-500 500 mm 0.6 mm PS1 ½ (Internal), φ50 Hose Connection, Multiple Installations Allowed
LDL-600 600 mm 0.8 mm PS1 ½ (Internal), φ50 Hose Connection, Multiple Installations Allowed
LDL-700 700 mm 1 mm PS1 ½ (Internal), φ50 Hose Connection, Multiple Installations Allowed
LDL-800 800 mm 1 mm PS1 ½ (Internal), φ50 Hose Connection, Multiple Installations Allowed
LDLX-800 800 mm 0.6 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed
LDLX-900 900 mm 0.6 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed
LDLX-1000 1000 mm 0.8 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed
LDLX-1100 1100 mm 0.8 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed
LDLX-1200 1200 mm 1 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed
LDLX-1300 1300 mm 1 mm PT2 (External), PS2, φ65 Hose Connection, Multiple Installations Allowed

The post Daikoken Heat LDN to LDLX series High-precision lip-type first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat T Series Compressor Use – High Pressure Slotted Nozzle https://koueitrading.com/global/product/daikoken-heat-t-series-compressor-use-high-pressure-slotted-nozzle/ Fri, 18 Dec 2020 00:18:49 +0000 https://koueitrading.com/global/?post_type=product&p=178087 Manufacturer: Daikoken Heat Co., Ltd. Model: T Series Features Even when used at high temperatures, the slotted nozzle reduces clogging, making it suitable for environments where nozzle clogging is a concern. Specifications Compressor Use: 0.2 × 21 slotted, 20 mm pitch continuous High Pressure Nozzle: 0.8 × 21 slotted, 20 mm pitch continuous

The post Daikoken Heat T Series Compressor Use – High Pressure Slotted Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: T Series

Features

  • Even when used at high temperatures, the slotted nozzle reduces clogging, making it suitable for environments where nozzle clogging is a concern.

Specifications

  • Compressor Use: 0.2 × 21 slotted, 20 mm pitch continuous

  • High Pressure Nozzle: 0.8 × 21 slotted, 20 mm pitch continuous

The post Daikoken Heat T Series Compressor Use – High Pressure Slotted Nozzle first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat B Series High Pressure Nozzle – Multi-hole Type https://koueitrading.com/global/product/daikoken-heat-b-series-high-pressure-nozzle-multi-hole-type/ Fri, 18 Dec 2020 00:15:52 +0000 https://koueitrading.com/global/?post_type=product&p=178086 Manufacturer: Daikoken Heat Co., Ltd. Model: B Series Features Effective when there are irregular depressions or concavities on the surface, as it creates a stronger air blast in the center of the circular holes compared to slotted types, with less surrounding air swirl and longer reach of the wind.

The post Daikoken Heat B Series High Pressure Nozzle – Multi-hole Type first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: B Series

Features

  • Effective when there are irregular depressions or concavities on the surface, as it creates a stronger air blast in the center of the circular holes compared to slotted types, with less surrounding air swirl and longer reach of the wind.

The post Daikoken Heat B Series High Pressure Nozzle – Multi-hole Type first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat RCP & RCI series for rapid drying https://koueitrading.com/global/product/daikoken-heat-rcp-rci-series-for-rapid-drying/ Fri, 18 Dec 2020 00:10:55 +0000 https://koueitrading.com/global/?post_type=product&p=178090 Manufacturer: Daikoken Heat Co., Ltd. Model: RCP & RCI series Features These series are designed based on the unique principles and extensive knowledge of the company. They feature ideal nozzles and suction capacities, efficiently directing the flow of heated air. By placing the nozzles in the tank section as shown in the diagram on the […]

The post Daikoken Heat RCP & RCI series for rapid drying first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: RCP & RCI series

Features

  • These series are designed based on the unique principles and extensive knowledge of the company.
  • They feature ideal nozzles and suction capacities, efficiently directing the flow of heated air. By placing the nozzles in the tank section as shown in the diagram on the left, higher drying efficiency and heat processing can be achieved.

Specifications

RCP Series Nozzles

Nozzle Model Slotted Length Slotted Width Air Flow Rate
RCP-1 100 mm 200 mm φ50, φ65, φ75
RCP-2 100 mm 2400 mm φ50, φ65, φ75
RCP-3 2400 mm 2400 mm φ50, φ65, φ75

 

RCI Series Nozzles

Nozzle Model Slotted Length Slotted Width Air Flow Rate
RCI-1 100 mm 200 mm φ50, φ65, φ75
RCI-2 100 mm 2400 mm φ50, φ65, φ75
RCI-3 2400 mm 2400 mm φ50, φ65, φ75

The post Daikoken Heat RCP & RCI series for rapid drying first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat TCNS Series Automatic Temperature Controller https://koueitrading.com/global/product/daikoken-heat-tcns-series-automatic-temperature-controller/ Thu, 17 Dec 2020 00:55:04 +0000 https://koueitrading.com/global/?post_type=product&p=177637 Manufacturer: Daikoken Heat Co., Ltd. Model: TCNS Series Features All models use a high-precision PID regulator meter with an accuracy of +-0.3% FS (+1 digital) All models have alarm output terminals for upper/lower temperature setting. NFB standard equipment (TCNS-2 type only circuit protector) With delay timer for cooling operation (TCA/TC type only) With thermal protector […]

The post Daikoken Heat TCNS Series Automatic Temperature Controller first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: TCNS Series

Features

  • All models use a high-precision PID regulator meter with an accuracy of +-0.3% FS (+1 digital)
  • All models have alarm output terminals for upper/lower temperature setting.
  • NFB standard equipment (TCNS-2 type only circuit protector)
  • With delay timer for cooling operation (TCA/TC type only)
  • With thermal protector for blower protection (TCA/TC type only)
  • BOX iron (powder coated finish) (made of TCNS-2 type aluminum)
The post Daikoken Heat TCNS Series Automatic Temperature Controller first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat PGO-91&91G Wave Nozzle Pattagan https://koueitrading.com/global/product/daikoken-heat-pgo-9191g-wave-nozzle-pattagan/ Thu, 17 Dec 2020 00:18:21 +0000 https://koueitrading.com/global/?post_type=product&p=177641 Manufacturer: Daikoken Heat Co., Ltd. Model: PGO-91&91G Features Material Body cover: Polyacetal injection tube: Polyurethane thread part: SUS304

The post Daikoken Heat PGO-91&91G Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: PGO-91&91G

Features

  • Material
    Body cover: Polyacetal
    injection tube: Polyurethane
    thread part: SUS304
The post Daikoken Heat PGO-91&91G Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SPG-25&25G Rotary Wave Nozzle Pattagan https://koueitrading.com/global/product/daikoken-heat-spg-2525g-rotary-wave-nozzle-pattagan/ Thu, 17 Dec 2020 00:11:23 +0000 https://koueitrading.com/global/?post_type=product&p=177639 Manufacturer: Daikoken Heat Co., Ltd. Model: SPG-25&25G Features The air jet of the nozzle tube from the back of the cover rotates at high speed By rotating, intermittent shock waves are spread over a wide area It can drain and dedust more effectively than traditional air guns The rotation of the nozzle tube nozzle allows […]

The post Daikoken Heat SPG-25&25G Rotary Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SPG-25&25G

Features

  • The air jet of the nozzle tube from the back of the cover rotates at high speed
  • By rotating, intermittent shock waves are spread over a wide area
  • It can drain and dedust more effectively than traditional air guns
  • The rotation of the nozzle tube nozzle allows the flow rate to remain the same, reducing processing time and saving air consumption.

The post Daikoken Heat SPG-25&25G Rotary Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SPG-40& 40G Rotary Wave Nozzle Pattagan https://koueitrading.com/global/product/daikoken-heat-spg-40-40g-rotary-wave-nozzle-pattagan/ Thu, 17 Dec 2020 00:03:33 +0000 https://koueitrading.com/global/?post_type=product&p=177638 Manufacturer: Daikoken Heat Co., Ltd. Model: SPG-40& 40G Features The air jet of the nozzle tube from the back of the cover rotates at high speed By rotating, intermittent shock waves are spread over a wide area It can drain and dedust more effectively than traditional air guns The rotation of the nozzle tube nozzle […]

The post Daikoken Heat SPG-40& 40G Rotary Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SPG-40& 40G

Features

  • The air jet of the nozzle tube from the back of the cover rotates at high speed
  • By rotating, intermittent shock waves are spread over a wide area
  • It can drain and dedust more effectively than traditional air guns
  • The rotation of the nozzle tube nozzle allows the flow rate to remain the same, reducing processing time and saving air consumption.

The post Daikoken Heat SPG-40& 40G Rotary Wave Nozzle Pattagan first appeared on Kouei Japan Trading | Get Quotation.]]> Daito Kogyo Gear shafts made of resin https://koueitrading.com/global/product/daito-kogyo-gear-shafts-made-of-resin/ Wed, 16 Dec 2020 00:54:38 +0000 https://koueitrading.com/global/?post_type=product&p=177272 Manufacturer: Daito Kogyo Co., Ltd. Features We have developed a gear shaft appropriate for transporting liquid containing water. Traditionally, gear pumps are not good at handling water, but we have made it possible by using a special resin. This gear shaft can endure the high loads commonly found with gear pumps. It can also handle […]

The post Daito Kogyo Gear shafts made of resin first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daito Kogyo Co., Ltd.

Features

  • We have developed a gear shaft appropriate for transporting liquid containing water.
    Traditionally, gear pumps are not good at handling water, but we have made it possible by using a special resin.
    This gear shaft can endure the high loads commonly found with gear pumps. It can also handle corrosive liquids.
The post Daito Kogyo Gear shafts made of resin first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FH Series Fan Heater (Seeds Heater) https://koueitrading.com/global/product/daikoken-heat-fh-series-fan-heater-seeds-heater/ Tue, 15 Dec 2020 00:35:38 +0000 https://koueitrading.com/global/?post_type=product&p=176265 Manufacturer: Daikoken Heat Co., Ltd. Model: FH Series Features Inlet fan filter included Full-circular fan cover Safety two-pole thermal fuse included Heating surface insulation included

The post Daikoken Heat FH Series Fan Heater (Seeds Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FH Series

Features

  • Inlet fan filter included
  • Full-circular fan cover
  • Safety two-pole thermal fuse included
  • Heating surface insulation included

The post Daikoken Heat FH Series Fan Heater (Seeds Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SH Series Horizontal Hot Air Generation Heater (Seeds Heater) https://koueitrading.com/global/product/daikoken-heat-sh-series-horizontal-hot-air-generation-heater-seeds-heater/ Mon, 14 Dec 2020 00:54:51 +0000 https://koueitrading.com/global/?post_type=product&p=176242 Manufacturer: Daikoken Heat Co., Ltd. Model: SH Series Features This series uses a heater designed to emit low-temperature exhaust heat by utilizing a heat exchanger with high heat exchange efficiency. It is designed to be more compact and stable than previous products, achieving more efficient heat air circulation. The connection part is made of stainless […]

The post Daikoken Heat SH Series Horizontal Hot Air Generation Heater (Seeds Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SH Series

Features

  • This series uses a heater designed to emit low-temperature exhaust heat by utilizing a heat exchanger with high heat exchange efficiency.
  • It is designed to be more compact and stable than previous products, achieving more efficient heat air circulation.
  • The connection part is made of stainless steel (SUS), and the use of gas ensures that the heater produces clean heat with low pressure loss compared to other types of heaters.

Models:

  • SH-1-300 (0.3 kW)
  • SH-1-500 (0.5 kW)
  • SH-1-800 (0.8 kW)
  • SH-2-1000 (1 kW)
  • SH-2-1600 (1.6 kW)
  • SH-2-2000 (2 kW)

Materials:

  • Main casing: SUS304
  • Exhaust part connection: SUS321

Specifications:

  • Maximum air intake temperature: 220°C
  • Main body pressure resistance: 30 kPa
Model Type SH-1-300 SH-1-500 SH-1-800 SH-2-1000 SH-2-1600 SH-2-2000
Heater Capacity (KW) 0.3 0.5 0.8 1 1.6 2
Power Supply Voltage Single Phase-100V Single Phase-100V Single Phase-100V Single Phase-200V Single Phase-200V Single Phase-200V
Maximum Continuous Use Temperature 260°C 280°C 300°C 300°C 300°C 300°C
Minimum Usable Airflow (Nm³/min) 0.05 0.83 0.134 0.167 0.268 0.355
Inlet & Outlet Diameter φ50 (Standard Specification) φ50 (Standard Specification) φ50 (Standard Specification) φ50 (Standard Specification) φ50 (Standard Specification) φ50 (Standard Specification)
Reference Weight (g) 1000 1200 1500 2000 2500 2900
Recommended Temperature Controller TCNS-2 TCNS-2 TCNS-2 TCNS-2 TCNS-2 TCNS-2
The post Daikoken Heat SH Series Horizontal Hot Air Generation Heater (Seeds Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FP-S Series Air Filter High Temperature Specification Double Side Piping Connection https://koueitrading.com/global/product/daikoken-heat-fp-s-series-air-filter-high-temperature-specification-double-side-piping-connection/ Mon, 14 Dec 2020 00:50:55 +0000 https://koueitrading.com/global/?post_type=product&p=176143 Manufacturer: Daikoken Heat Co., Ltd. Model: FP-S Series Features Pre-filter unit FP-S type (maximum operating temperature 240°C) This is a pre-filter unit that is mainly used by connecting to the middle of piping. The product has a unique rectification structure to evenly distribute air to the containment filter. In addition, if you purchase an additional […]

The post Daikoken Heat FP-S Series Air Filter High Temperature Specification Double Side Piping Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FP-S Series

Features

  • Pre-filter unit FP-S type (maximum operating temperature 240°C)
  • This is a pre-filter unit that is mainly used by connecting to the middle of piping.
  • The product has a unique rectification structure to evenly distribute air to the containment filter.
  • In addition, if you purchase an additional HEPA filter and external casing and packing, you can also use it as a HEPA filter unit with our model number FS type.
  • Setting pre-filter
  • material→ aromatic polyamide (cannot be washed and reused, operating temperature up to 240°C) 2 spare filters included
  • Performance→ 30~40μm dust target (*1)
  • Casing material→SUS304
  • The main body withstand pressure → about 10KPa (*2)

Model A B C D E F G H (Dead Hole) J (Entrance and Exit Diameter) Treated airflow
FP-S-200 260 280 90 55 30 190 220 4-Φ7L15 Φ50～75 2.4m3/min.
FP-S-300 360 380 190 55 30 190 220 4-Φ7L15 Φ50～125 5.4m3/min.
FP-S-500 600 620 350 75 50 320 380 4-Φ9L18 Φ75～175 15.0m3/min.
FP-S-600 710 730 400 105 50 350 410 4-Φ9L18 Φ100～200 22.3m3/min.
The post Daikoken Heat FP-S Series Air Filter High Temperature Specification Double Side Piping Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FP Series Filter Double Pipe Connection https://koueitrading.com/global/product/daikoken-heat-fp-series-filter-double-pipe-connection/ Mon, 14 Dec 2020 00:42:06 +0000 https://koueitrading.com/global/?post_type=product&p=176141 Manufacturer: Daikoken Heat Co., Ltd. Model: FP Series Features Pre-filter unit FP type (maximum operating temperature 80°C) This is a pre-filter unit that is mainly used by connecting to the middle of piping. The product has a unique rectification structure to evenly distribute air to the containment filter. In addition, if you purchase an additional […]

The post Daikoken Heat FP Series Filter Double Pipe Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FP Series

Features

  • Pre-filter unit FP type (maximum operating temperature 80°C)
  • This is a pre-filter unit that is mainly used by connecting to the middle of piping.
  • The product has a unique rectification structure to evenly distribute air to the containment filter.
  • In addition, if you purchase an additional HEPA filter and external casing packing, it can also be used as a HEPA filter unit with our model number FN type.
  • Setting pre-filter
  • material→ Polyester/Polykral (washable and reusable, operating temperature up to 80°C) 2 spare filters included
  • Performance→30~40μm dust target
  • Casing material→SUS304
  • The main body withstand pressure → about 30KPa

Model A B C D E F G H (Dead Hole) J (Entrance and Exit Diameter) Treated airflow
FP-200 260 280 90 55 30 190 220 4-Φ7L15 Φ50～75 2.4m3/min.
FP-300 360 380 190 55 30 190 220 4-Φ7L15 Φ50～125 5.4m3/min.
FP-500 600 620 350 75 50 320 380 4-Φ9L18 Φ75～175 15.0m3/min.
FP-600 710 730 400 105 50 350 410 4-Φ9L18 Φ100～200 22.3m3/min.
The post Daikoken Heat FP Series Filter Double Pipe Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SHL Series Large Hot Air Generation Heater https://koueitrading.com/global/product/daikoken-heat-shl-series-large-hot-air-generation-heater/ Mon, 14 Dec 2020 00:40:06 +0000 https://koueitrading.com/global/?post_type=product&p=176240 Manufacturer: Daikoken Heat Co., Ltd. Model: SHL Series Features For a large-capacity heater, it is extremely small. As a result, the radiant heat loss taken away by the space in the heater case is small, and a high heat exchange rate is achieved. If you want to flow a large amount of air, we also […]

The post Daikoken Heat SHL Series Large Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SHL Series

Features

  • For a large-capacity heater, it is extremely small. As a result, the radiant heat loss taken away by the space in the heater case is small, and a high heat exchange rate is achieved.
  • If you want to flow a large amount of air, we also handle low pressure drop specifications.

Specifications of Hot Air Generation Heater SHL Series

Model Capacity (KW) Current (A) Termination method (delta type)
SHL-10
(40KW)		 40KW 115.5 3333W×
12 – 1 line
SHL-10
(44KW)		 44KW 127.1 3666W×
12 – 1 line
SHL-10
(50KW)		 50KW 144.4 3333W×
15 – 1 line
SHL-10
(55KW)		 55KW 158.8 3666W×
15 – 1 line
SHL-10-2C
(80KW)		 80KW 231.0 3333W×
12 – 2 lines
SHL-10-2C
(88KW)		 88KW 254.1 3666W×
12 – 2 lines
SHL-10-2C
(100KW)		 100KW 288.7 3333W×
15 Lines-2 Lines
SHL-10-2C
(110KW)		 110KW 317.6 3666W×
15 Lines-2 Lines
Model Minimum airflow (Nm3/min) Blowing and discharging diameter Reference weight
SHL-10
(40KW)		 6.71 φ100, φ125, φ150
φ175, φ200, φ250		 45
SHL-10
(44KW)		 7.39
SHL-10
(50KW)		 8.39
SHL-10
(55KW)		 9.23
SHL-10-2C
(80KW)		 13.42 φ150・φ175
φ200・φ250		 96
SHL-10-2C
(88KW)		 14.78
SHL-10-2C
(100KW)		 16.78
SHL-10-2C
(110KW)		 18.46
The post Daikoken Heat SHL Series Large Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat S-1 Series Hot Air Generation Heater https://koueitrading.com/global/product/daikoken-heat-s-1-series-hot-air-generation-heater/ Mon, 14 Dec 2020 00:31:46 +0000 https://koueitrading.com/global/?post_type=product&p=176247 Manufacturer: Daikoken Heat Co., Ltd. Model: S-1 Series Features For compressed air and other high-pressure air, it is connected to maintain a stable temperature up to 800°C. Model Types: S-1-800 S-1-1000 S-1-1600 S-1-2000 Specifications Model Type S-1-800 S-1-1000 S-1-1600 S-1-2000 Heater Capacity (W) 800 1000 1600 2000 Power Supply Voltage Single Phase 100V Single Phase […]

The post Daikoken Heat S-1 Series Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: S-1 Series

Features

  • For compressed air and other high-pressure air, it is connected to maintain a stable temperature up to 800°C.

Model Types:

  • S-1-800
  • S-1-1000
  • S-1-1600
  • S-1-2000

Specifications

Model Type S-1-800 S-1-1000 S-1-1600 S-1-2000
Heater Capacity (W) 800 1000 1600 2000
Power Supply Voltage Single Phase 100V Single Phase 100V Single Phase 100V Single Phase 100V
Maximum Continuous Use Temperature Up to 800°C Up to 800°C Up to 800°C Up to 800°C
Minimum Usable Airflow (L/min) 45 57 90 114
Inlet & Outlet Diameter Inlet: PS1/4″ (Internal), Outlet: PT1/4″ (External) Inlet: PS1/4″ (Internal), Outlet: PT1/4″ (External) Inlet: PS1/4″ (Internal), Outlet: PT1/4″ (External) Inlet: PS1/4″ (Internal), Outlet: PT1/4″ (External)
Temperature Sensor Inlet PS1/8″ (Internal) PS1/8″ (Internal) PS1/8″ (Internal) PS1/8″ (Internal)
Reference Weight (g) 450 570 600 760
Recommended Temperature Controller TCNS-2 TCNS-2 TCNS-2 TCNS-2
Materials Main Casing: SUS304, Internal Construction: High-temperature Ni-Cr wire, Glass Ceramic Heater Main Casing: SUS304, Internal Construction: High-temperature Ni-Cr wire, Glass Ceramic Heater Main Casing: SUS304, Internal Construction: High-temperature Ni-Cr wire, Glass Ceramic Heater Main Casing: SUS304, Internal Construction: High-temperature Ni-Cr wire, Glass Ceramic Heater
The post Daikoken Heat S-1 Series Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SHBR Series Horizontal Standing Branch Heater https://koueitrading.com/global/product/daikoken-heat-shbr-series-horizontal-standing-branch-heater/ Mon, 14 Dec 2020 00:30:50 +0000 https://koueitrading.com/global/?post_type=product&p=176233 Manufacturer: Daikoken Heat Co., Ltd. Model: SHBR Series Specifications The standard SH series is arranged to handle products with capacities from 4 kW to 55 kW. For the exhaust vent, the standard models have a 50mm, 65mm, 75mm, or 100mm diameter that can be selected up to a 4-minute range. Model Types: SHBR-3 (4/5 kW) […]

The post Daikoken Heat SHBR Series Horizontal Standing Branch Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SHBR Series

Specifications

  • The standard SH series is arranged to handle products with capacities from 4 kW to 55 kW.
  • For the exhaust vent, the standard models have a 50mm, 65mm, 75mm, or 100mm diameter that can be selected up to a 4-minute range.

Model Types:

  • SHBR-3 (4/5 kW)
  • SHBR-4 (6/7.5 kW)
  • SHBR-5 (8/10 kW)
  • SHBR-6 (12/15 kW)
  • SHBR-7 (15/18 kW)
  • SHBR-8 (20/24/25/30 kW)
  • SHBR-9 (30/33 kW)

Exhaust part type with 4 outlets

  • The specifications of the exhaust part, such as the size of the exhaust vent, the number of outlets, and the type of heater, vary depending on the model, so please inquire for details.
  • For details about the shape, size, performance, and specifications of the brand heater, refer to pages P7 to P9 of the catalog (SH model).
The post Daikoken Heat SHBR Series Horizontal Standing Branch Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FAS Series Compact Heater https://koueitrading.com/global/product/daikoken-heat-fas-series-compact-heater/ Mon, 14 Dec 2020 00:22:45 +0000 https://koueitrading.com/global/?post_type=product&p=176246 Manufacturer: Daikoken Heat Co., Ltd. Model: FAS Series Features Can operate steadily at high temperatures up to 800°C. Due to its small size, it can be installed in direct injection locations, minimizing heat loss from the piping. Uses a special tungsten wire that ensures long life and stable high-temperature operation. Equipped with a CA sensor […]

The post Daikoken Heat FAS Series Compact Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FAS Series

Features

  • Can operate steadily at high temperatures up to 800°C.
  • Due to its small size, it can be installed in direct injection locations, minimizing heat loss from the piping.
  • Uses a special tungsten wire that ensures long life and stable high-temperature operation.
  • Equipped with a CA sensor for internal temperature control, offering more accurate and safer temperature regulation compared to previous models.
  • FAS-350 (350W, 100V)
  • FAS-650 (650W, 100V)

Specifications

Model Type FAS-350 FAS-650
Heater Capacity (W) 350 650
Minimum Usable Airflow (L/min) 20 38
Reference Weight (g) 104 150
Recommended Temperature Controller TCNS-2 TCNS-2
Power Supply Voltage Single Phase – 100V Single Phase – 100V
Maximum Continuous Use Temperature 800°C 800°C
Maximum Air Intake Temperature 40°C 40°C
Maximum Usable Air Pressure 0.2 MPa (2 kg/cm²) 0.2 MPa (2 kg/cm²)
Main Casing Material SUS304 SUS304
Heater Element SUS321 SUS321

 

The post Daikoken Heat FAS Series Compact Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat SH Series Horizontal Hot Air Generation Heater https://koueitrading.com/global/product/daikoken-heat-sh-series-horizontal-hot-air-generation-heater/ Mon, 14 Dec 2020 00:19:01 +0000 https://koueitrading.com/global/?post_type=product&p=176223 Manufacturer: Daikoken Heat Co., Ltd. Model: SH Series Features This is a multi-purpose electric hot air generation heater designed to achieve a high heat exchange rate. Although it is a stainless steel heater, we have achieved a low price through mass production. Since there are many types, they can be freely selected, connected, and have […]

The post Daikoken Heat SH Series Horizontal Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SH Series

Features

  • This is a multi-purpose electric hot air generation heater designed to achieve a high heat exchange rate.
  • Although it is a stainless steel heater, we have achieved a low price through mass production.
    Since there are many types, they can be freely selected, connected, and have a long service life and continuous operation.

Specifications

Power supply Material
: Body: Casing		 Material
: Heating Body Heating Gas Section		 Double insulation structure Overheating protection
200V3 Phase SUS304 SUS321 Standard Specifications Standard Specifications
Model Heater capacity Minimum airflow that can be
specified		 Spit out Automatic
temperature controller to fit
SH-3 4kw 0.59 m3/min φ50～φ100 ＴＣ-6
5kw 0.73 m3/min
SH-4 6kw 0.88 m3/min φ50～φ150
7.5kw 1.1 m3/min TC-12
SH-5 8kw 1.17 m3/min φ50～φ100
10kw 1.47 m3/min
SH-6 12kw 1.76 m3/min φ50～φ150
15kw 2.2 m3/min TC-20
SH-7 15kw 2.35 m3/min φ75～φ150
18kw 2.8 m3/min
SH-8 20kw 3.13 m3/min φ100～φ250
24kw 3.76 m3/min TC-33
25kw 4.2 m3/min
30kw 5.03 m3/min
SH-9 30kw 5.03 m3/min φ75～φ150
33kw 5.54 m3/min

 

Model Heater
body pressure		 Maximum temperature for continuous use Continuous maximum temperature of inhaled gas Insulation
SH-3 30kpa
(6000mmAq)		 320℃ 250℃ BodyThree-sided
ceramic insulation
SH-4
SH-5
SH-6
SH-7 30kpa
SH-8
SH-9

 

The post Daikoken Heat SH Series Horizontal Hot Air Generation Heater first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat L00 Series Hot Air Generation Heater (Seed Heater) https://koueitrading.com/global/product/daikoken-heat-l00-series-hot-air-generation-heater-seed-heater/ Mon, 14 Dec 2020 00:10:29 +0000 https://koueitrading.com/global/?post_type=product&p=176244 Manufacturer: Daikoken Heat Co., Ltd. Model: L00 Series Features The device is designed to be used with small amounts of air or gas (1 L/min to 300 L/min) at 0.3 MPa or lower, which makes it suitable for use in clean heating environments. The air inlet, heat exhaust, and 1/4-inch internal gas pipe are designed […]

The post Daikoken Heat L00 Series Hot Air Generation Heater (Seed Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: L00 Series

Features

  • The device is designed to be used with small amounts of air or gas (1 L/min to 300 L/min) at 0.3 MPa or lower, which makes it suitable for use in clean heating environments.
  • The air inlet, heat exhaust, and 1/4-inch internal gas pipe are designed to easily connect to the pipe, allowing easy installation.
  • The heater element is shaped into a coil guide and processed to enhance performance, making the heater more efficient in producing heat within the device.

Model Type:

  • L-00-100W
  • L-01-200W
  • L-02-300W
  • L-03-400W
  • L-04-500W
  • L-05-600W

Specifications:

  • Power Supply Voltage: Single Phase – 100V
  • Maximum Continuous Use Temperature: 300°C
  • Maximum Air Intake Pressure: 40°C
  • Air Pressure: 0.3 MPa (3 kg/cm²)

Materials:

  • Main Casing: SUS304
  • Heater Element: SUS321

Table of Specifications

Model Type L-00-100W L-01-200W L-02-300W L-03-400W L-04-500W L-05-600W
Heater Capacity (W) 100 200 300 400 500 600
Maximum Airflow (L/min) 15.6 31.3 47 62.5 78.9 94.4
Reference Weight (g) 300 300 400 500 600 700
Recommended Temperature Controller TCNS-2 TCNS-2 TCNS-2 TCNS-2 TCNS-2 TCNS-2

 

The post Daikoken Heat L00 Series Hot Air Generation Heater (Seed Heater) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FD Series Air Filter Blower Inlet Connection https://koueitrading.com/global/product/daikoken-heat-fd-series-air-filter-blower-inlet-connection/ Mon, 14 Dec 2020 00:03:31 +0000 https://koueitrading.com/global/?post_type=product&p=176142 Manufacturer: Daikoken Heat Co., Ltd. Model: FD Series Features Pre-filter unit type FD (suction maximum temperature 40°C) This filter unit is mainly used by connecting to the suction side of the blower (blower). By expanding the suction area, the suction flow speed can be reduced and the suction noise of the blower can be reduced. […]

The post Daikoken Heat FD Series Air Filter Blower Inlet Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FD Series

Features

  • Pre-filter unit type FD (suction maximum temperature 40°C)
  • This filter unit is mainly used by connecting to the suction side of the blower (blower).
  • By expanding the suction area, the suction flow speed can be reduced and the suction noise of the blower can be reduced.
  • The connection is standard with a hose mouth. Depending on the application, specifications with dampers and flanges can also be manufactured.
  • If the connection is made of a damper specification, it is possible to easily adjust the suction air volume.
  • Set filter material→ Polyester/Polykral (washable and reusable) 2 spare filters included Set filter
  • performance→ 30~40μm dust
  • Casing material →SUS304

Model A D E F G H J K L (Stop Hole) Treated airflow
FD-200 200 132 110 150 205 267 180 200 4-Φ6 2.4m3/min.
FD-250 250 157 140 200 255 317 220 250 4-Φ8.5 3.8m3/min.
FD-300 300 182 170 250 305 367 270 300 4-Φ8.5 5.4m3/min.
FD-400 400 252 120 320 405 455 320 360 6-Φ11 9.6m3/min.
FD-500 500 302 170 420 505 555 440 480 6-Φ11 15.0m3/min.

 

Standard Specification (Hose Spout)

Pipe Diameter (C) Φ50 Φ65 Φ75 Φ100 Φ125 Φ150 Φ175
B 60 60 60 60 60 60 60

 

When the connection is made to a damper specification

Pipe Diameter (C) Φ50 Φ65 Φ75 Φ100 Φ125 Φ150 Φ175
B 90 90 90 220 220 220 220
The post Daikoken Heat FD Series Air Filter Blower Inlet Connection first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat FS Series Air Filter High Temperature Type Pipe Connection on Both Sides https://koueitrading.com/global/product/daikoken-heat-fs-series-air-filter-high-temperature-type-pipe-connection-on-both-sides/ Sun, 13 Dec 2020 15:40:44 +0000 https://koueitrading.com/global/?post_type=product&p=176087 Manufacturer: Daikoken Heat Co., Ltd. Model: FS Series Features This is a high-temperature HEPA filter unit that is connected to the middle of the pipe. A high-temperature pre-filter and a HEPA filter are set inside the unit (at the rated treatment airflow), and the powder collection efficiency of 0.3 μm is 99.97%. In addition, the […]

The post Daikoken Heat FS Series Air Filter High Temperature Type Pipe Connection on Both Sides first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FS Series

Features

  • This is a high-temperature HEPA filter unit that is connected to the middle of the pipe. A high-temperature pre-filter and a HEPA filter are set inside the
    unit (at the rated treatment airflow), and the powder collection efficiency of 0.3 μm is 99.97%.
    In addition, the product has a unique rectification structure to evenly distribute air to the entire containment filter.
    Setting pre-filter
    Material→ Aromatic polyamide (cannot be washed and reused, up to 240°C) 2 spare filters included
    Performance→ 30~40μm dust target (*Note 1)
    Setting Hepa filter
    Material→ glass paper (operating temperature 25) Up to 0°C)
    Performance →0.3~0.4μm dust target (*Note 2)
    Casing material→SUS304
    Body pressure → about 10Kpa (*3)

Model A B C D E F G H (Dead Hole) J (Entrance and Exit Diameter) Treated airflow
FS-200 260 280 90 55 30 487 517 4-Φ7L15 Φ50～75 3.0m3/min.
FS-300 360 380 190 55 30 487 517 4-Φ7L15 Φ50～125 8.5m3/min.
FS-500 600 620 350 75 50 617 677 4-Φ9L18 Φ75～175 26.5m3/min.
FS-600 710 730 400 105 50 647 707 4-Φ9L18 Φ100～200 41.0m3/min.
The post Daikoken Heat FS Series Air Filter High Temperature Type Pipe Connection on Both Sides first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat HEPA Air Filter Both Sides Piping Connection FN Series https://koueitrading.com/global/product/daikoken-heat-hepa-air-filter-both-sides-piping-connection-fn-series/ Sun, 13 Dec 2020 15:26:34 +0000 https://koueitrading.com/global/?post_type=product&p=176085 Manufacturer: Daikoken Heat Co., Ltd. Model: FN Series Features This HEPA filter unit is used by connecting to the middle of the pipe. A pre-filter and a HEPA filter are set inside the unit (at the rated treatment airflow), and the powder collection efficiency of 0.3 μm is 99.97%. In addition, the product has a […]

The post Daikoken Heat HEPA Air Filter Both Sides Piping Connection FN Series first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: FN Series

Features

  • This HEPA filter unit is used by connecting to the middle of the pipe.
    A pre-filter and a HEPA filter are set inside the unit (at the rated treatment airflow), and the powder collection efficiency of 0.3 μm is 99.97%.
    In addition, the product has a unique rectification structure to evenly distribute air to the containment filter.
    Setting pre-filter
    Material→ Polyester/Polykral (washable and reusable, operating temperature up to 80°C) 2 spare filters included
    Performance→ 30~40μm dust target (*Note 1)
    Setting Hepa filter
    Material→ glass paper ( Operating temperature up to 60°C)
    Performance →0.3~0.4μm dust target (*2)
    Casing material→SUS304
    Body pressure →about 30Kpa (*3)

Model A B C D E F G H (Dead Hole) J (Entrance and Exit Diameter) Treated airflow
FN-200 260 280 90 55 30 487 517 4-Φ7L15 Φ50～75 2.0m3/min.
FN-300 360 380 190 55 30 487 517 4-Φ7L15 Φ50～125 6.0m3/min.
FN-500 600 620 350 75 50 617 677 4-Φ9L18 Φ75～175 19.0m3/min.
FN-600 710 730 400 105 50 647 707 4-Φ9L18 Φ100～200 29.5m3/min.
The post Daikoken Heat HEPA Air Filter Both Sides Piping Connection FN Series first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Heat-Resistant Silicone Duct Hose (2 meters) https://koueitrading.com/global/product/daikoken-heat-heat-resistant-silicone-duct-hose-2-meters/ Sun, 13 Dec 2020 15:15:10 +0000 https://koueitrading.com/global/?post_type=product&p=176074 Manufacturer: Daikoken Heat Co., Ltd. Features Maximum Temperature: 200°C Made of glass fiber-reinforced silicone rubber, this flexible duct hose can withstand high temperatures up to 200°C, making it suitable for various high-temperature industrial applications.

The post Daikoken Heat Heat-Resistant Silicone Duct Hose (2 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • Maximum Temperature: 200°C
  • Made of glass fiber-reinforced silicone rubber, this flexible duct hose can withstand high temperatures up to 200°C, making it suitable for various high-temperature industrial applications.
The post Daikoken Heat Heat-Resistant Silicone Duct Hose (2 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Heat-Resistant Hose – FV Type (5 meters) https://koueitrading.com/global/product/daikoken-heat-heat-resistant-hose-fv-type-5-meters/ Sun, 13 Dec 2020 15:12:30 +0000 https://koueitrading.com/global/?post_type=product&p=176071 Manufacturer: Daikoken Heat Co., Ltd. Features Maximum Temperature: 250°C Specially designed with glass-reinforced stainless steel (SUS304). It is flexible, resistant to high temperatures (up to 250°C), and ideal for use with heat-sensitive equipment in various industries.

The post Daikoken Heat Heat-Resistant Hose – FV Type (5 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • Maximum Temperature: 250°C
  • Specially designed with glass-reinforced stainless steel (SUS304). It is flexible, resistant to high temperatures (up to 250°C), and ideal for use with heat-sensitive equipment in various industries.
The post Daikoken Heat Heat-Resistant Hose – FV Type (5 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Aluminum Flexible Hose (4 meters) https://koueitrading.com/global/product/daikoken-heat-aluminum-flexible-hose-4-meters/ Sun, 13 Dec 2020 15:10:25 +0000 https://koueitrading.com/global/?post_type=product&p=176073 Manufacturer: Daikoken Heat Co., Ltd. Features Maximum Temperature: 200°C Made of aluminum, suitable for flexible applications and can be used in a variety of temperature conditions. It is resistant to cutting and is ideal for use with mechanical tools.

The post Daikoken Heat Aluminum Flexible Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • Maximum Temperature: 200°C
  • Made of aluminum, suitable for flexible applications and can be used in a variety of temperature conditions. It is resistant to cutting and is ideal for use with mechanical tools.
The post Daikoken Heat Aluminum Flexible Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Stainless Steel Flexible Hose (4 meters) https://koueitrading.com/global/product/daikoken-heat-stainless-steel-flexible-hose-4-meters/ Sun, 13 Dec 2020 15:06:31 +0000 https://koueitrading.com/global/?post_type=product&p=176017 Manufacturer: Daikoken Heat Co., Ltd. Features Maximum Temperature: 600°C Features: Made from SUS304 stainless steel. It is highly resistant to high temperatures, and its structure can withstand heat and external forces. It is resistant to high temperatures but not suitable for use in extreme cold conditions.

The post Daikoken Heat Stainless Steel Flexible Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • Maximum Temperature: 600°C
  • Features: Made from SUS304 stainless steel. It is highly resistant to high temperatures, and its structure can withstand heat and external forces.
  • It is resistant to high temperatures but not suitable for use in extreme cold conditions.
The post Daikoken Heat Stainless Steel Flexible Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Abrasion-Resistant GL Type Hose (4 meters) https://koueitrading.com/global/product/daikoken-heat-abrasion-resistant-gl-type-hose-4-meters/ Sun, 13 Dec 2020 15:03:49 +0000 https://koueitrading.com/global/?post_type=product&p=176015 Manufacturer: Daikoken Heat Co., Ltd. Features Maximum Temperature: 100°C This hose is designed for conveying air in environments with high mechanical wear. It can also be used in outdoor environments at temperatures up to 100°C, making it suitable for use in environments with higher abrasion.

The post Daikoken Heat Abrasion-Resistant GL Type Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • Maximum Temperature: 100°C
  • This hose is designed for conveying air in environments with high mechanical wear. It can also be used in outdoor environments at temperatures up to 100°C, making it suitable for use in environments with higher abrasion.
The post Daikoken Heat Abrasion-Resistant GL Type Hose (4 meters) first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken MT Series (TBN-T) Heat https://koueitrading.com/global/product/daikoken-mt-series-tbn-t-heat/ Sun, 13 Dec 2020 01:36:12 +0000 https://koueitrading.com/global/?post_type=product&p=175998 Manufacturer: Daikoken Heat Co., Ltd. Model: MT Series Features Medium Pressure Turbofan MT Series (TBN-T) Inlet Temperature ~250°C Specifications Model Voltage (V) Maximum Power (KW) Maximum static pressure (Kpa) Maximum airflow (m3/min) Suction and discharge diameter (φmm) MT1(TBN2.5T) 200V3 Phase 0.13/0.18 0.88/1.18 4.5/5.0 75/70 MT2(TBN3T) 200V3 Phase 0.22/0.32 1.18/1.57 6/7 75/75 MT3(TBN4T) 200V3 Phase 0.40/0.40 […]

The post Daikoken MT Series (TBN-T) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: MT Series

Features

  • Medium Pressure Turbofan MT Series (TBN-T) Inlet Temperature ~250°C

Specifications

Model Voltage
(V)		 Maximum Power
(KW)		 Maximum static pressure
(Kpa)		 Maximum airflow
(m3/min)		 Suction and discharge
diameter (φmm)
MT1(TBN2.5T) 200V3 Phase 0.13/0.18 0.88/1.18 4.5/5.0 75/70
MT2(TBN3T) 200V3 Phase 0.22/0.32 1.18/1.57 6/7 75/75
MT3(TBN4T) 200V3 Phase 0.40/0.40 1.37/1.96 10/12 100/100
MT4(TBN5T) 200V3 Phase 0.75/0.75 1.67/2.35 18/20 125/125
MT5(TBN6T) 200V3 Phase 1.5/1.5 2.16/3.14 28/32 150/150
The post Daikoken MT Series (TBN-T) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken P Series (TN-T) Heat https://koueitrading.com/global/product/daikoken-p-series-tn-t-heat/ Sun, 13 Dec 2020 01:35:14 +0000 https://koueitrading.com/global/?post_type=product&p=176001 Manufacturer: Daikoken Heat Co., Ltd. Model: P Series Features Plate Fan P Series (TN-T) Suction Temperature ~250°C Model Voltage (V) Maximum Power (KW) High Static Pressure (Kpa) Maximum airflow (m3/min) Suction and discharge diameter (φmm) P1(TN2T) 200V3 Phase 0.11/0.14 0.63/0.88 4.0/5.0 75/55 P2(TN2.5) 200V3 Phase 0.12/0.17 0.59/0.88 6/7 90/70 P3(TN3) 200V3 Phase 0.18/0.25 0.81/1.18 6.5/8.0 […]

The post Daikoken P Series (TN-T) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: P Series

Features

  • Plate Fan P Series (TN-T) Suction Temperature ~250°C
Model Voltage
(V)		 Maximum Power
(KW)		 High Static Pressure
(Kpa)		 Maximum airflow
(m3/min)		 Suction and discharge
diameter (φmm)
P1(TN2T) 200V3 Phase 0.11/0.14 0.63/0.88 4.0/5.0 75/55
P2(TN2.5) 200V3 Phase 0.12/0.17 0.59/0.88 6/7 90/70
P3(TN3) 200V3 Phase 0.18/0.25 0.81/1.18 6.5/8.0 100/75
P4(TN4) 200V3 Phase 0.20/0.29 0.81/1.17 7.5/9.0 100/100
P5(TN5) 200V3 Phase 0.40/0.40 1.18/1.67 15.0/17.0 125/125
P6(TN6) 200V3 Phase 0.75/0.75 1.42/2.06 23/28 150/150
P7(TN6TB) 200V3 Phase 1.5/1.5 1.91/2.75 30/35 150/150
The post Daikoken P Series (TN-T) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat BR Series Multi-branch Pipe Horizontal Type https://koueitrading.com/global/product/daikoken-heat-br-series-multi-branch-pipe-horizontal-type/ Sun, 13 Dec 2020 01:18:12 +0000 https://koueitrading.com/global/?post_type=product&p=175886 Manufacturer: Daikoken Heat Co., Ltd. Model: BR Series. Features Distributes air from blowers in various directions using a multi-branch pipe. Inlet and outlet equipped with dampers to adjust flow rate. Dampers can be installed on the air inlet side to control airflow at the outlet. Features a three-branch pipe to regulate airflow distribution. Made from […]

The post Daikoken Heat BR Series Multi-branch Pipe Horizontal Type first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: BR Series.

Features

  • Distributes air from blowers in various directions using a multi-branch pipe.
  • Inlet and outlet equipped with dampers to adjust flow rate.
  • Dampers can be installed on the air inlet side to control airflow at the outlet.
  • Features a three-branch pipe to regulate airflow distribution.
  • Made from SUS304.
  • Suitable for both horizontal and vertical installations.
  • Easy integration into existing systems.

Specifications

 

X (Number of Branches) D F G M LM IJ N (Stop Hole)
φ50 x 2-3 branches 50 100 120 100 200 170 4-φ7L15
φ65 x 2-3 branches 50 100 120 100 200 170 4-φ7L15
φ75 x 2 branches 50 100 120 100 200 170 4-φ7L15
φ50 x 4-5 branches 50 200 220 100 200 170 4-φ7L15
φ65 x 4branches 50 200 220 100 200 170 4-φ7L15
φ75 x 3-4 branches 50 200 220 100 200 170 4-φ7L15
φ100 x 2-3 branches 50 200 220 100 200 170 4-φ7L15
φ125 x 2 branches 50 200 220 100 200 170 4-φ7L15
φ50 x 6-8 branches 60 330 360 160 320 280 4-φ9L18
φ65 x 6-8 branches 60 330 360 160 320 280 4-φ9L18
φ75 x 5-6 branches 60 330 360 160 320 280 4-φ9L18
φ100 x 4 branches 60 330 360 160 320 280 4-φ9L18
φ125 x 3-4 branches 60 330 360 160 320 280 4-φ9L18
φ50 x 9-10 branches 80 440 480 240 400 380 4-φ9L18
φ65 x 8-10 branches 80 440 480 240 440 380 4-φ9L18
φ75 x 7-9 branches 80 440 480 240 440 380 4-φ9L18
φ100 x 5-7 branches 80 440 480 240 440 380 4-φ9L18
φ125 x 5 branches 80 440 480 240 440 380 4-φ9L18
φ75 x 10 branches 100 650 700 280 560 500 4-φ11L20
φ100 x 8-10 branches 100 650 700 280 560 500 4-φ11L20
φ125 x 6-8 branches 100 650 700 280 560 500 4-φ11L20
Connection Inlet Side (X) A B H
φ50 40 80 90
φ65 45 90 90
φ75 50 100 90
φ100 70 140 220
φ125 85 170 220
Connection Inlet Side (Y) C
φ50 80
φ65 80
φ75 90
φ100 120
φ125 150
φ150 180
φ175 210
φ200 240

 

The post Daikoken Heat BR Series Multi-branch Pipe Horizontal Type first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Hose connector for connection https://koueitrading.com/global/product/daikoken-heat-hose-connector-for-connection/ Sun, 13 Dec 2020 00:53:53 +0000 https://koueitrading.com/global/?post_type=product&p=176010 Manufacturer: Daikoken Heat Co., Ltd. Features This product is designed to match various sizes of hose joints, including PT threads and standard flange sizes, to adapt to different conditions such as high pressure or temperature. It is convenient for low-pressure hose and duct connections. Material: SUS304 Specifications

The post Daikoken Heat Hose connector for connection first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • This product is designed to match various sizes of hose joints, including PT threads and standard flange sizes, to adapt to different conditions such as high pressure or temperature.
  • It is convenient for low-pressure hose and duct connections.

  • Material: SUS304

Specifications

The post Daikoken Heat Hose connector for connection first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken Heat Right-Angle Connectiontriangle Elbow https://koueitrading.com/global/product/daikoken-heat-right-angle-connectiontriangle-elbow/ Sun, 13 Dec 2020 00:49:40 +0000 https://koueitrading.com/global/?post_type=product&p=176012 Manufacturer: Daikoken Heat Co., Ltd. Features This component is designed to adapt to various sizes of 90° elbows, PT threads, and other conditions like dampers. It allows for smooth integration with low-pressure hoses and ducts, making it convenient for hose and duct connections.

The post Daikoken Heat Right-Angle Connectiontriangle Elbow first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.

Features

  • This component is designed to adapt to various sizes of 90° elbows, PT threads, and other conditions like dampers.
  • It allows for smooth integration with low-pressure hoses and ducts, making it convenient for hose and duct connections.

The post Daikoken Heat Right-Angle Connectiontriangle Elbow first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken HP Series (VFZ-A) Heat https://koueitrading.com/global/product/daikoken-hp-series-vfz-a-heat/ Sun, 13 Dec 2020 00:38:44 +0000 https://koueitrading.com/global/?post_type=product&p=175993 Manufacturer: Daikoken Heat Co., Ltd. Model: HP Series Features Model Voltage (V) Maximum Power (KW) Maximum static pressure (Kpa) Maximum airflow (m3/min) Suction and discharge Caliber (φmm) HP4(VFZ401Ａ) 200V3 Phase 0.55/0.85 10.4/14.1 2.0/2.5 50,PT1.1/2 HP5(VFZ501Ａ) 200V3 Phase 1.3/1.9 14.7/19.6 3.4/4.0 50,PT1.1/2 HP6(VFZ601Ａ) 200V3 Phase 2.3/3.4 21.1/27.5 4.2/5.5 63,PT2 HP7(VFZ701Ａ) 200V3 Phase 3.3/5.0 21.6/28.4 6.2/7.2 PS2 […]

The post Daikoken HP Series (VFZ-A) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: HP Series

Features

Model Voltage
(V)		 Maximum Power
(KW)		 Maximum static pressure
(Kpa)		 Maximum airflow
(m3/min)		 Suction and discharge
Caliber (φmm)
HP4(VFZ401Ａ) 200V3 Phase 0.55/0.85 10.4/14.1 2.0/2.5 50,PT1.1/2
HP5(VFZ501Ａ) 200V3 Phase 1.3/1.9 14.7/19.6 3.4/4.0 50,PT1.1/2
HP6(VFZ601Ａ) 200V3 Phase 2.3/3.4 21.1/27.5 4.2/5.5 63,PT2
HP7(VFZ701Ａ) 200V3 Phase 3.3/5.0 21.6/28.4 6.2/7.2 PS2
HP8(VFZ801Ａ) 200V3 Phase 5.5/7.5 25.5/33.3 8.70/10.3 PS2.1/2
HP9(VFZ901A) 200V3 Phase 11/15 25.5/31.4 13.0/15.5 PS3

 

The post Daikoken HP Series (VFZ-A) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Daikoken SHP Series (VFZ-AN) Heat https://koueitrading.com/global/product/daikoken-heat-high-pressure-blower-low-noise-type-shp-series-vfz-an-inlet-temperature-40c/ Sun, 13 Dec 2020 00:38:16 +0000 https://koueitrading.com/global/?post_type=product&p=175994 Manufacturer: Daikoken Heat Co., Ltd. Model: SHP Series Features High Pressure Blower Low Noise Type Inlet Temperature ~40°C Model Voltage (V) Maximum Power (KW) Maximum static pressure (Kpa) Maximum airflow (m3/min) Suction and discharge diameter (φmm) SHP4(VFZ401ＡN) 200V3 Phase 0.55/0.85 10.4/14.1 2.0/2.5 50,PT1.1/2 SHP5(VFZ501ＡN) 200V3 Phase 1.3/1.9 14.7/19.6 3.4/4.0 50,PT1.1/2 SHP6(VFZ601AN) 200V3 Phase 2.3/3.4 21.1/27.5 […]

The post Daikoken SHP Series (VFZ-AN) Heat first appeared on Kouei Japan Trading | Get Quotation.]]> Manufacturer: Daikoken Heat Co., Ltd.
Model: SHP Series

Features

High Pressure Blower Low Noise Type Inlet Temperature ~40°C

Model Voltage
(V)		 Maximum Power
(KW)		 Maximum static pressure
(Kpa)		 Maximum airflow
(m3/min)		 Suction and discharge
diameter (φmm)
SHP4(VFZ401ＡN) 200V3 Phase 0.55/0.85 10.4/14.1 2.0/2.5 50,PT1.1/2
SHP5(VFZ501ＡN) 200V3 Phase 1.3/1.9 14.7/19.6 3.4/4.0 50,PT1.1/2
SHP6(VFZ601AN) 200V3 Phase 2.3/3.4 21.1/27.5 4.2/5.5 63,PT2
SHP7(VFZ708ＡN) 200V3 Phase 3.3/5.0 21.6/28.4 6.2/7.2 PS2
SHP8(VFZ808ＡN) 200V3 Phase 5.5/7.5 25.5/33.3 8.70/10.3 PS2.1/2
SHP9(VFZ908ＡN) 200V3 Phase 11/15 25.5/31.4 13.0/15.5 PS3
The post Daikoken SHP Series (VFZ-AN) Heat first appeared on Kouei Japan Trading | Get Quotation.]]>