Features

• This seal-less gear pump is environment-friendly and suitable where safety is top priority.
• The magnet-type shaft seal completely seals with no liquid leakage.
• Liquid of 0.1 L/min – 600 L/min can be pumped. It requires no seal maintenance, saves cost, and can handle from low to high-viscosity liquids. We offer a wide range of materials to suit your specifications, and the pump is widely used for such materials as gasoline, bioethanol, liquids containing hazardous substances, and isocyanate.

Specifications

Features

• We have developed a gear pump with a jacket throughout the case, shaft bearing, and shaft seal.
• This full jacket type allows heating and cooling, and has a double mechanical seal shaft seal.
• It is ideal for liquids with high melting point or that easily harden, etc.

Features

• We have developed this outer shaft bearing OH-G gear pump made into a V belt engine drive.
  Because it is equipped with a wheeled platform, the pump can easily be moved such as in an emergency.

Features

• We have developed a pump capable of transporting minute amounts of highly viscous liquid (75000 mPa•s).
  Capacity: 0.08 to 0.185 L/min
  Self-priming capability: -0.095 MPa
  The case and mechanical seal sections are equipped with a jacket, and a double mechanical seal is used.

Features

• This pump is for transporting special liquids at a flow rate of 2.5 to 15 L/h.
  The shaft seal is our own original double mechanical seal.
  The pump is equipped with a seal pot, pressure gauge and liquid level indicator, making it easy to manage the sealing liquid.

Features

• This is a seal-less gear pump for minute quantities, and its heating or cooling jacket is removable as it is in a cartridge form.

Features

• This pump is for transporting low-viscosity oil in explosion-proof areas.
  The electric motor is used as an air motor as a precaution against explosion.

Specifications

• 12B x 300 m³/Hr (5000 L/min) x 0.8 MPa x 730 min^-1 x 160 kW

Features

• This is the gear pump for vacuuming in high temperature status.
• It controls the flow rate by using the inverter shift transmission and prevents the cavitation at high viscosity.
• The pump case and mechanical seal sections are equipped with a jacket to control the temperature of the pump.

Specifications

• Resin liquid x temperature max 300 °C x viscosity 5000 to 10 mPa•s
  Flow rate: 2 to 4.5 L/min

Features

• This line pump maintains a high pressure so that the fluid containing gas does not evaporate in the line during transportation.
• The pump is a seal-less type which is impenetrable, strong and hermetic as a pressure vessel.

Specifications

• suction side pressure 4.3 MPa, discharge side pressure 5.0 MPa,
  Total pressure 0.7 MPa
  230 L/min x 1150 min^-1 x 7.5 kW
  An integrated safety valve is equipped.

Features

• Direct-acting flange type with a jacket.
• Made of SUS only.

Features

• Completely sealed flange type for vacuum lines

Features

• Pilot flange type. An independent safety valve for high pressure.
  Consult us if a jacket is needed.

Features

• Direct-acting flange type.
  For 3/4B or higher, a jacket can be provided.

Features

• Direct-acting threaded type.

Specifications

Features

• The shaft seal is a Teflon oil seal, so the gear pump helps prevent hardening of the solution in the outer shaft bearing OH type. It is widely used for resins, etc.

Features

The shaft seal is a gland packing type.

Specifications

Features

• The shaft seal is a single mechanical seal. It is a versatile, high-performance gear pump of the outer shaft bearing type.
• It is suitable for high-pressure transportation of liquids without lubrication, or liquids that are abrasive or corrosive.
• The pump is widely used for such materials as waste oil/waste liquids, liquids containing slurry, chemical extinguisher undiluted solution, and flocculants.

Specifications

Features

• This gear pump is for transporting special resin.
• The pump, speed reducer, and motor are connected with Metastream Couplings, and API Plan 53A is used for the pump’s mechanical seal.

Specifications

• 6B × 350 L/min × 1.34 MPa × 213min^-1 × 30 kW

Features

• This gear pump has a Teflon oil seal type shaft seal, which is ideal for liquids that easily harden such as thermal hardening liquid, photo-curing liquid, varnish, paint, or resin.
• The seal section combines ceramic with a Teflon oil seal for preventing solidification.
• It is easy to maintain, and the Teflon oil seal is always available for immediate delivery.

Features

• We have developed a fully jacketed gear pump that can heat the entire pump.
  Considering thermal expansion at high temperature, the drive system uses a universal joint.
  It is ideal for transporting highly viscous liquids.
  Specifications: viscosity up to 2000000 mPa•s, temperature 200 °C

Features

• The shaft seal is our original double bellows mechanical seal, which offers outstanding sealing performance and suction ability for suction from drums or vacuum suction.
• The set with mechanical seal is always available for immediate delivery.
• It is widely used for various kinds of chemicals, solvents, or paints.

Features

• We have developed a pump approved for high-pressure gas, with seal-less system for the shaft seal.
• It can handle pressures of up to approximately 10 MPa.

Features

• This pump is ideal for extracting a highly viscous liquid with a larger bore on the suction side.
  (S = 6B, D = 2 1/2B)
  Temperature management is easy because both the case and mechanical seal sections are equipped with a jacket.
  The shaft seal features our proprietary double mechanical seal.

Features

• We have developed a seal-less gear pump MC counter shaft V belt drive.

Features

• We have developed a compact, seal-less MC gear pump.
• This is an environment-friendly gear pump without leakage and requiring no seal maintenance.
• It can also handle a capacity of as low as 0.1 L/min.

Features

• The shaft seal is a gland packing.

Features

• We have developed a large engine drive digestive fluid pump.
  Engine power: 70 kW
  Various drive systems are available; contact us for details.

Features

• This is a transverse mounted, non-wetted outer shaft bearing (ball bearing) gear pump.
  The liquid enters from the upper flange, and is discharged from the lower flange.

Features

• This is a turret-shaped, V belt drive gear pump.
  A pump is mounted on the upper stage of the turret-shaped base, and a motor on the lower stage.

Features

• The shaft seal is a single mechanical seal, both the inside mechanical seal type (HP-EM, KH-M) and outside mechanical seal type (HP-M, KH-KM).
• The plain metal design allows high-pressure, long-term continuous operation. For resistance to corrosion and abrasion, it is possible to combine various kinds of materials, and to choose jackets or built-in safety valves. We can custom-make product to match your specifications.

Features

• We have developed a large-capacity gear pump with a jacketed case and shaft seal.
  The drive system is a counter shaft V belt drive.

Features

• We have developed the KR-(S) geared motor direct drive.

Specifications

• 8 A x 60 L/Hr x 0.1 MPa x 180 min^-1 x 90 W x 100 V

Features

• We have developed a pump for transporting high-temperature special resin liquids.
  The shaft seal is a Teflon oil seal, and is equipped with piping for flushing.

Features

• This is designed with sufficient maintenance space for the pump.

Features

Reduction gears are located between the pump and motor to reduce the rotation speed.

Features

• The shaft seal is a single mechanical seal with a built-in safety valve.
• It is a heavy-duty compact gear pump that can withstand demanding, high-pressure operation for many hours, and is ideal for transporting various oils such as kerosene, heavy oil A to C, fuel oil, or lubricant oil.

Specifications

Features

• This gear pump is for vacuuming a lubricant.
• Although it is a large type with a caliber of 6B, the pump body and the motor are installed on and under the channel base to reduce the installation space.
• It is turret-shaped with V-belt drive.

Specifications

• 6B x 1250 L/min x 0.5 MPa x 22 kW

Features

• We have developed the MC-J coupling direct drive gear pump; this seal-less type has no leakage from the shaft seal and is equipped with a case jacket.
• It is ideal for heating or cooling liquids with high viscosity/high melting point, liquids that harden upon contact with air, or hazardous fluids (that must not be leaked outside).

Features

• This gear pump is for transporting large quantities of asphalt at 200°C.
  The drive shaft is the lower shaft type, and the fluid flows from right to left as the shaft rotates clockwise (left to right) seen from the motor side.

Specifications

• 5B x 50 m³/Hr x 0.4 MPa x 18.5 kW

Features

• This double bellows mechanical seal gear pump comes with a case jacket and built-in safety valve.
• It is highly effective for transporting liquids requiring temperature management, even under harsh suction conditions.
  The base is a steel plate that also acts as a drain pan.

Features

• This is driven by a motor with a stepless speed change device.
• The capacity can be freely controlled by changing the rotation speed (1:4 or 1:10) according to the transportation of lubricant oil, etc.