Features

Edge Finder (Steel Type)
Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.

Features

Used in the spindle of a machine such as a mill to accurately locate the centre of a workpiece.

Specification

Features

A device used to fixate items on the table to facilitate measurements.

This small clamp holds an item to be tested under testing devices such as coordinate measuring machine, projector, microscope etc. The V groove on the plate is designed to grip round or irregularly-shaped objects in place. The holding force can be easily adjusted by operating the springs.

Specification

Features

This Multi Sine Bar can be set to any angle by combining the necessary block gauges in reference to a conversion table. Suitable for both use at work and general inspection. Ensured high accuracy on squareness, parallelism, and distance between roller centres.

Features

A tool for precisely setting up angles.
Combination of simply-designed V blocks and angle plates allows rapid and easy angle setting, leading to substantially improved operational efficiency.

Specification

Features

Triangle gauge for interior angle use
Precisely ground angle for convenient set-ups in tooling, production and inspection.

Specification

Features

Used for angle inspection
This 12-piece set can form angles from 15′ to 115°45′. It has undergone a grinding process to ensure highly precise measurement.

Features

Superior in operability; it exerts powerful clamping forces for positively holding even multiple workpieces.

･ Incorporating a new slide type mechanism, it exerts powerful clamping forces in both the horizontal and downward directions, positively fixating the workpiece in place.
· Clamping and unclamping can be easily controlled by tightening and loosening the single bolt.
· Full processing of the workpiece surface is possible thanks to the flatness of the clamp top.
· Allows the workpiece to be loaded with a space given between the workpiece bottom and the table top, permitting an operation involving through-hole machining to be made in a single setup.

Features

Excellent performance in situations of vigorous movement.

Maintains a steady clamping force even without a base support despite any alterations of the height of workpiece. Its superior clamping ability and its simple and straight-forward mechanism result in a significantly shortened operation time.

Features

Very small magnetic stand permits use with dial indicators and test indicators in very confined area, yet with a highly durable locking mechanism.

Specifications

A large-size vernier caliber for finding out the inside dimensions of a structure. Best used in construction site, shipbuilding, civil engineering work etc.

Features

Measuring the inside dimension becomes easy with this Inside Vernier Caliper. Specially designed to withstand harsh weather conditions at outdoor work, its stainless-steel body with carbide tips on both sides make it free of rusting and allow highly precise measurement. We provide a wide range of sizes to accomodate your needs.

Specifications

Extension Bar（1m standard auxiliary pipe）

By attaching this extension bar will increase the measurement capacity by 1m.

Example of use

Features

For measuring the diameter or the size of wire, rolled sheet steel etc. with Standard type, US type and Japanese type.

Specifications

SWG：Standard Wire Gauge

Features

Used to check convex or concave quickly and easily

Precisely copy curved shapes and surfaces.
Ideal use in situations such as tile and carpet laying, surface duplication of molds and automative sheet metal etc. Widely used in factories, construction site, carpenter work, DIY home decoration.

Specifications

Example of use

Model: TDG-20

Features

Used for checking the tire tread depth.
Its compact size allows efficient check during the machining process.

Specifications

Model: 50M

Features

Used for depth measurement of holes, slots etc.
Its compact size allows efficient check during the machining process.

Specifications

Features

Measurement of bead biuld-up during general welding work

An essential tool for various check during welding.

Specifications

Measurement Range : 20mm (7/8″)
Distance between roots : 1.5 – 10mm (1/16 – 1/2″)
Angle of bevel groove : 0 – 85°
General Angle : 0 – 50°

Example of use

Features

This gauge is used for inspection of the drill point angle (118°) during the sharpening process.
In addition to the standard 118° blade angle plate, five additional angle plates can also be used (60°, 120°, 130°, 140° and 160°).

Specifications

Example of use

Features

Used by inspectors, toolmakers, and die-sinkers for checking angles.
This gauge consists of 18 leaves with angles ranging from 1° to 45°. All numbers refer to a complimentary angle.

Specifications

Example of use

Features

Measure the size of a chamfer on a workpiece.
It has a compact design to be easily portable for on-site jobs.

Specifications

Example of use

Features

S model and L model are for the use of small and large pitch respectively.
The pressure angle of these gauges are 14 1/2° and 20°

Specifications

Module Pitch

Diametral Pitch

Features

A handy gauge for use in grinding and setting screw cutting tools.
The angle of lathe center and screw cutting tool can be precisely measured.

Specifications

Example of use

Features

Used in lathe work for checking the angles when grinding the profiles of screw-cutting tool bits and centers.
The side cut allows a right-angle inspection on the cutting tool and the machine.

Specifications

Example of use

Features

A standard for grinding and setting tools when cutting trapezoidal screw threads ( Acme thread)

The depth of threads are the same

Specifications

Features

Measure the pitch of 30°(Metric) and 29°(Inch) trapezoidal screw thread (Acme threads).
Made of stainless steel, the gauge set for 29° thread angle consists of 16 blades and the 30° angle 12 blades, with each sizing 90mm long. Gear tooth sizes range from 30-40mm.

Specifications

Features

Used to measure the pitch of a screw thread.

The number on each leaf represents the pitch size.
Metric indicates the distance between each pair of screw thread, while Whitworth and Unified direct to the number of threads per inch (25.4mm)

Specifications

Features

Radius Gauges for big size works

Specifications

Features

Radius Gauges for big size works

Specifications

Features

Highly precise, quenched products.

With high precision is manufactured and sold as a standard products, then please make a inquiry if you need.

Specifications

Features

Used for checking internal and external radius on each leaf or the concave and concave radii of a curved surface.

Toolmakers and Inspectors can measure the radii of the edges and corners of works.

Each leaves stamped with sizes. High precision is guaranteed

Specifications

Features

Used for checking the convex and concave radii of tool patterns and other machining jobs.

Each leaves stamped with sizes. High precision is guaranteed

Specifications

Features

Used for checking internal an external radii of tool patterns and other machining jobs. Individual gauges can be used separately. Each gauge is marked with its radius and 5 different gauge surfaces for both convex and concave radii. High precision is guaranteed

Specifications