Howa Model 1500 Rifle

Howa Machinery has been exporting sporting rifles for more than five decades since its first unit shipped in 1967. Our Howa Model 1500 sporting rifle has continually led the pack in terms of quality and design evolution.
We invite sport shooters from around the world to try our rifles to feel the difference for themselves.

Manufacturing

We presented the Howa Golden Bear bolt action rifle at the Chicago Shot Show in 1967. Currently we manufacture Howa Model 1500 Rifle and they are used in many countries around the world including US market.
We will continue to aim at becoming a globally recognized rifle manufacturer taking advantage of skills and experiences which have been cultivated for more than 50years.

COLD HAMMER FORGED BARREL

The better dimensional accuracy and surface quality can be expected.
Cold hammer forging machine enables to manufacture high quality barrels stably.

ONE-PIECE MACHINED RECEIVER AND BOLT

Contributing to a cleaner, more comfortable, people-friendly environment

In today’s era of modern amenities everyone demands a clean and comfortable environment. At the same time, given rapid changes in our environment, requirements for the maintenance and beautification of living spaces continue to grow ever more diverse. Howa Machinery is responding to these needs with its lineup of street sweepers essential for maintaining expressways, national routes and residential streets for vehicle safety and comfort as well as with power sweepers and scrubbers for cleaning factories, public facilities and leisure facilities. We stand more committed than ever to contributing further to society through the excellent products and services we provide that are underpinned by our extensive experience and technological prowess in the field.

Street sweepers

Street sweepers are specially designed vehicles that clean dirt, garbage and other small debris from expressways, general roads, factory sites and quarries. We offer brush, dry-type vacuum/brush and vacuum recirculating type street sweepers.

Industrial sweepers

Power sweepers clean dirt, garbage and other small debris both indoors and outdoors at factories, warehouses, and parking structures. We offer a lineup of brush and blower-type power sweepers that offer great cleaning performance.

Scrubbers

Scrubbers clean floors inside factories, warehouses and buildings. Scrubbers polish floors and collect dirty water using a squeegee.

Inline X-Ray Tomography Testing System XL-330i

A high-speed, compact and low-cost X-ray tomography testing system specially designed for inline testing of BGA chips mounted on high-density double sided circuit boards.

PSG-200α Punching Machine

Offers a high hit rate of 30 holes/second thanks to its piezoelectric actuator drive.
Linear servo motor delivers high-speed and high-precision operations.
Has reduced idling time (simplified pin and dye replacement).
Super-quite operations.

CSG-280α Cutting Machine

A low-price model with a single-blade design.
A CCD camera enables high-precision image processing.
Helps reduce setup time (simplified machining program preparation / cutter holder installation).

PLM Series Stacking Machine

Alignment with a CCD camera and achieves high-precision laminated layers of less than ±5µm through pin lamination.

HIKARI Series HDE110S Simultaneous Double Exposure System for PCB Internal Layers

A high-throughput and high-resolution automated exposure system designed to meet high productivity standards.

HIKARI Series FE205C Vertical-Type Double Sided Exposure System

An automatic exposure system designed with a vertical structure that offers high-precision and high-quality exposures.

HIKARI Series ASRE110S Automatic Exposure System for Solder Resists

An automatic exposure system offering high precision as well as high reliability in light of tack-dry issues associated with solder resist.

Hydraulic Mini Cylinder with Cushion TM (10MPa)

Uses a cushion that can accommodate all inner diameters.
Features a newly designed cushion valve that makes it easier to adjust the cushion.
It is possible to select from a compact contact or non-contact type switch.

Low Pressure Hydraulic Cylinder TL (3.5MPa)

Switch comes standard.A U-packing is used as the standard piston seal.

Hydraulic Cylinder TH (14MPa)

Uses a high-performance cushion to reduce shock during stoppages.
Features a newly designed cushion valve that makes it easier to adjust the cushion.
Features a standard new switch that has many variations and is more easily maintained.

Hydraulic Rotary Actuator RTB (10MPa)

A hydraulic rotary actuator with rack and pinion type.
Features a very simple structure that is highly reliable and requires fewer repairs.
Can be used in various applications, including as a rotating table, feed unit and reverse feed unit.
Offers a standard rotating angle of 250°. Customized rotating angles can also be accommodated.

Hydraulic Rotary Actuator RTD (3.5MPa)

A hydraulic rotary actuator with rack and pinion type.
It is possible to install a sensor switch.
Offers a standard rotating angle of 90° and 180°. Customized rotating angles can also be accommodated.

Pneumatic Rotary Actuator RTC (0.7MPa)

A pneumatic rotary actuator with rack and pinion type.

Offers a standard rotating angle of 250°. Customized rotating angles can also be accommodated.

HH0JD Hydraulic Jig Cylinder

Pneumatic Clamp Cylinder with Sensor JA Series (0.8MPa)

Compact “Frog Clamp™” Cylinders JLF5H Series (7MPa)

MRV Flat Rodless

ORV Eco Rodless

C1TA Through-Hole Rotating Hydraulic Cylinder (with safety device)

Lightweight and thin with a large through-hole.
Features a built-in check valve for safety.
Offers an optional coolant collector and detecting ring for checking operations.

HH31C Through-Hole Rotating Hydraulic Cylinder

A compact hollow rotating cylinder is capable of ideal high speeds when combined with the small-diameter hollow power chuck.

HH4C Rotating Hydraulic Cylinder

A standard lightweight standard rotating hydraulic cylinder capable of high speeds.
The direction of the drain port in relation to the supply port of hydraulic oil can be changed as needed, enabling simpler piping.

HH4CB Rotating Hydraulic Cylinder with Safety Device

The HH4C rotating hydraulic cylinder has a built-in check valve for safety.

HH61C Rotating Hydraulic Cylinder with Coolant Connection

Features a built-in rotary joint that can be used to check the seating and spindle coolant.
Offers a dog plate, proximity switch and many other options for checking operations.

HH62C Rotating Hydraulic Cylinder with Safety Device and Coolant Connection

The HH61C rotating hydraulic cylinder has a built-in check valve for safety.

C1FB Rotating Hydraulic Cylinder with Safety Device

An optional rotary joint is available. The rotary joint has one or two paths, enabling a flow of air for checking the seating or coolant. Two types of rotary joint mounting are available, one that moves with the piston and the one that is fixed to the cylinder body.
An optional bracket is available for a proximity switch to check operations.
Features a built-in check valve for safety.

C1SA Short Type Rotating Hydraulic Cylinder

The cylinder length is designed to be short to reduce space taken up by an NC lathe.
Features a built-in check valve for safety.
Has a proximity switch for checking operations.

C1SB Short Type Rotating Hydraulic Cylinder with Coolant Connection

The C1SB is simply the C1SA Rotating Hydraulic Cylinder with a built-in rotary joint that is used to check the seating or spindle coolant. Even with the built-in rotary joint, the thickness from the mounting surface remains unchanged.

HH11C Rotating Hydraulic Cylinder with Stroke Control

Features a built-in limit switch and dog in the distributor part to detect piston movements, facilitating the checking of work piece clamping and the chuck opening/closing state. The design and installation are simplified because a separate limit switch or dog does not need to be added.

HH56C Rotating Hydraulic Cylinder

Used mainly with the H056M combination chuck.

H06C Rotating Air Cylinder with Coolant Connection

Features a built-in rotary joint that can be used to check the seating and spindle coolant.
Offers a dog mounting groove for checking operations.

H05CH Rotating Pneumatic Cylinder

A standard lightweight rotating pneumatic cylinder is capable of high speeds.

H05CHB Rotating Pneumatic Cylinder with Safety Device

The H05CH rotating pneumatic cylinder has a built-in check valve for safety.

H01MA Wedge Hook Type 3-Jaw Power Chuck

Our standard chuck model boasts a solid track record.
Offers a long life and great cost performance.

H3KS Wedge Hook Type 3-Jaw Power Chuck

Our newest standard chuck offers a long life and great cost performance.
Compared to the H01MA, the H3KS features significantly improved grip strength and maximum rotating speed.

H022M Wedge Hook Type 3-Jaw Long Jaw Stroke Power Chuck

Features a long jaw stroke that is more than twice the length of the H01MA.
Can clamp over work pieces with uneven surfaces and with a large range of chucking diameters.

H037M Wedge Hook Type 3-Jaw Large Through-Hole Power Chuck

Features a large through-hole that can accommodate high speeds and powerful clamp forces.
Ideal for clamping parts of work pieces inserted into the through-hole, confirming the seating, or making modifications, such as main spindle coolant specifications.
Can clamp on bar work supplied from the rear side of the main spindle.

H3KT Wedge Hook Type 3-Jaw Through-Hole Power Chuck

Features a large through-hole that can accommodate high speeds and powerful clamp forces.
Our new standard chuck is compatible with other companies’ products.

H3KB Wedge Hook Type 3-Jaw Large Through-Hole Power Chuck

Features a large through-hole that can accommodate high speeds and powerful clamp forces.
Our new standard chuck is compatible with other companies’ products.

H032M Crank Type 3-Jaw Long Jaw Stroke Power Chuck

Features an ultra long jaw stroke.
Can clamp over large uneven work pieces that the H022M cannot.

H018M Quick Change Through-Hole Power Chuck

It is easy to change or move the jaw by using the special wrench to make a half turn.
Ideal for clamping many different types of work pieces.

H011MC 3-Jaw Draw Down Power Chuck

Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.
Offers a long life and great cost performance.

H3DS 3-Jaw Sealed Type Draw Down Power Chuck

A fully sealed type drawn-down power chuck that extends lubrication intervals and prevents coolant infiltration.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces
This chuck is specially designed for clamping outer diameters. It cannot clamp inner diameters.

H3EF High Speed Type 3-Jaw Draw Down Power Chuck

Offers high clamp precision and double the maximum speed of the HO11MC.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.
Comes standard with a flow channel.

H013M I.D. Draw Down Power Chuck

A draw-down power chuck specially designed for clamping inner diameters.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.

H021MB 3-Jaw Power Change Chuck

Can switch to a lower clamp force without having to redo the grip because of its dual-pressure design.
Can clamp easily warped work pieces with high precision using lower clamp pressure.

H3PS 3-Jaw Sealed Type Power Change Chuck

A fully sealed type power change chuck that extends lubrication intervals and prevents coolant infiltration.
Can switch to a lower clamp force without having to redo the grip because of its two-pressure design.
Can clamp easily warped work pieces with high precision using lower clamp pressure.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.

H063M 3-Jaw Swing Lock Power Chuck (heavy rough machining)

Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.
Can clamp the taper part up to 20°, so that processes such as cutting a draft angle from casting are omitted.
Jaws equalize, which makes it possible to handle casted or forged work pieces with irregular surfaces.
It is possible to clamp outer and inner diameters simply by changing the configuration.

H3US Sealed Type Swing Lock Power Chuck

Offers a 30% increase in clamping force compared to conventional models. It is possible to downsize the chuck because the same cylinder offers the same clamping force as a chuck that is one size larger.
Greater clamping force enables even higher maximum speed.

H05M 3-Jaw Compensating Power Chuck

An internal floating cam makes it possible to clamp on the standard center hole even when the outer diameter of a work piece is not centered.
Its serration jaw ensures compatibility with a wide range of work piece diameters.

H055M Swing Jaw Type 3-Jaw Compensating Power Chuck

An internal floating cam makes it possible to clamp on the standard center hole even when the outer diameter of a work piece is not centered. Ideal for shaft machining work that requires double centering.
Uses a crank lever configuration to draw in and clamp work pieces.

H3YS Swing Jaw Sealed Type 3-Jaw Compensating Power Chuck

An internal floating cam makes it possible to clamp on the standard center hole even when the outer diameter of a work piece is not centered. Ideal for shaft machining work that requires double centering.
Uses a crank lever mechanism to draw in and clamp work pieces.
Features a fully sealed structure that extends lubrication intervals and prevents coolant infiltration.

H056M Combination Chuck (Reverse-Free Chuck)

A combination chuck includes a face driver.
Can greatly reduce setup time because machining can be carried out without reversing the work piece.

H024M Wedge Hook Type 2-Jaw Long Jaw Stroke Power Chuck

A 2-jaw long jaw stroke chuck ideal for clamping irregularly shaped work pieces.
Can clamp over the draft angle of flanges and casting work pieces.

H034M Wedge Type 2-Jaw Through-Hole Power Chuck

A 2-jaw hollow chuck ideal for clamping irregularly shaped work pieces.
Features a large through-hole that can accommodate high speeds and powerful clamp forces.
Can clamp part of a work piece inserted into the through-hole and can clamp irregularly shaped bar work piece supplied from the rear side of the main spindle.

H014M 2-Jaw Draw Down Power Chuck

A 2-jaw draw down chuck ideal for clamping irregularly shaped work pieces.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.
Ideal for irregularly shaped work pieces with difficult longitudinal dimensions and tolerances.

H064M 2-Jaw Swing Lock Chuck

A 2-jaw swing lock chuck ideal for clamping irregularly shaped work pieces.
Clamps work pieces against the chuck’s edge face, preventing uplifting of work pieces.
Can clamp the taper part up to 20°, so that processes such as cutting a draft angle from casting are omitted.
Jaws equalize, which makes it possible to handle casted or forged work pieces with irregular surfaces.
It is possible to clamp outer and inner diameters simply by changing the configuration.

H023M Wedge Hook Type 2- & 3-Jaw Hollow Chuck

Can clamp both cylindrical work pieces and irregularly shaped work pieces.
Can switch between a 2-jaw or a 3-jaw based on the work piece.

H012D Light Weight Stationary Chuck

A stationary pneumatic chuck used on boring and milling lathes.
The unit is designed to be installed below the mounting surface to prevent dust.

H010D / 24D / 37D Stationary Chuck

Stationery chucks are combined with a standard chuck added dust seal to prevent dust and a stationary cylinder.
These chucks can be combined with just about any other standard chuck, even those not mentioned here.

Standard Soft Blank Jaw / Standard Jaw Nut / Standard Hardened Jaw

• A jaw nut is not included with the soft blank jaw or hardened jaw. Please let your sales representative know when you require one.
  The leading edge of the soft blank jaw will need to be removed as necessary to fulfill the installation space requirements for each individual chuck.
  Please contact your sales representative if you require specially designed soft blank jaws or hardened jaws.

MKN-115VT High Spindle Speed Type

Offers ultra-compact, high-speed and high-precision machining of small parts such as the base plate of hard disk drive (HDD) and others.

MKN-135VT Wide Stroke Type

An ultra-high speed, wide-stroke-type machining center that can machine small parts in a number of ways with high precision.

MKN-350VT/370VT

Inline type machining center for aluminum parts used in automobiles and motorcycles. Compared to the #40 Machining Center, this model can significantly reduce a production line’s initial and running costs.

MKN-355VCJ

A fully evolved machining center with jig changer that can challenge the extremes of machining. Its wide range of machining capabilities makes it possible to handle even large automotive parts.

MKN-TS335VT

#30 Vertical Twin Spindle Machining Center
High productivity by Twin Spindle.

MKN-335VT

Delivers maximum performance in high-precision machining of small parts. Traverse type enables high productivity.

MKN-335VCJ

The undisputed machine in high-precision machining of small parts. Mounted with a jig changer that can enhance the productivity.

MBN-350Hα Standard Type

Offers the same high-value-added machining of the #40 Machining Center in the body of a #30 Machining Center.

MBN-350VCT1K #30 Standard Type

The #30 Standard Type Machining Center achieves a high utilization rate because it reduces failures caused by grinding swarf.

MBN-460VQ1 Quill Type

A global standard machining center achieves a high utilization rate because it reduces failures caused by grinding swarf. Its vertical configuration enables it to accommodate standard gantries for safe and secure operations.

MBN-450HQ2 Quill Type

A global standard machining center achieves a high utilization rate because it reduces failures caused by grinding swarf and can accommodate a variety of feeding methods.

MBN-450Hα High Performance Type

Reduces non-cutting time and can be used in multiple locations, either on an inline or stand-alone basis. Features an increased number of tools in a magazine to accommodate multiple high-productivity processes and can flexibly meet the needs of divided or integrated processes.

Maximum spindle speed	10,000 min-1
Travel distance	X:500 mm Y:500 mm Z:630 mm
Spindle taper	7/24 taper No. 40
Numerical control device (NC)	FANUC 31i-MA

MBN-455HN Heavy Machining Type

Offers a balance between higher speed and heavier machining than the conventional #40 Machining Center. Similar to the MBN-450H, the MBN-455HN can easily be incorporated into a line to boost productivity and accommodate heavier machining and larger loads.

Maximum spindle speed	12,000 min-1
Travel distance	X:550 mm Y:450 mm Z:500 mm
Spindle taper	7/24 taper No. 40
Numerical control device (NC)	FANUC 31i-MA