Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Urethane Former
This is the former made by a special polymer that has high peelability and durability The shape of the former specially designed to prevent edge chipping.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Metal Former
It is a durable Metal Former.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases efficiency of operation.

・Considering post-process: Anchor designed to be embedded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to a competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Free Former (Rubber)
When removing the form by sliding to cross direction, the bolt prevents the form to remove. The D-Lift Free Former let the bolt remove that enable the form removal by sliding

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases efficiency of operation.

・Considering post-process: Anchor designed to be embedded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to a competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Rubber Former
By fixing standard rubber former and D-Lift Anchor with form panel to create hemispherical shaped hollow on the concrete surface which enable them to coupling with D-Lift Coupler. D-Lift Former consist of element, butterfly bolt and nut.

Specification

Unit: mm

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Anchor
Applying high durability material and shape that enable to avoid the head of anchor to stick out from concrete surface. We have product line up of the rated load from 1.3tons up to 22tons.

Specification

Unit: mm

Mounting Methods

Product overview and features

● D-Lift System overview:

D-Lift system had developed by our partner company, HALFEN-DEHA in Germany that the technology to secure the safeness and speed up of the production and handling of concrete products which consist of below 3 points.

1. Anchor Embed into concrete product

2. Former Attaching anchor with mold

3. Coupler To Lift concrete product

We cover the suspended load from 1.3 tons to a maximum of 22tons. The customer is able to select a size based on product weight, production and building methods and conditions, etc. By using basic and optional parts will allow all types of construction methods.
● D-Lift System product features
・Wide range of suspended load: Covering by 7series from 1.3tons to 22tons.

・Safety, Certain, Easy: Simple form factor which considered carefully will secure safety during the lifting operation. Attaching and detaching of the sling is easy that increases effi ciency of operation.

・Considering post-process: Anchor designed to be embeded below a surface of the product. Also, the shape of the anchor is a nailhead that prevents concrete that filled in the dent made by the former to fall out by the anchor head to catch them by the nailhead.

・Competitive price: The anchor shape is simple and productivity to make them is very high that leads to competitive price of the product.

・Long time experience: The products has been used globally for long time and compatible with all suspending methods. Technical supports also available.

● D-Lift Coupler
The coupler part securely hold the head of D-Lift Anchor embedded into a concrete product. The ring part has flexibility so that it can be compatible with all of the lifting angles. Please do the regular inspection for repeated use.

Specification

Unit: mm

Mounting Methods

Product overview and features

● System developed for the transport of concrete products.

● There is no anchor projection on the surface of concrete, so that it is able to set at the narrow place. Also can be used with thin type concrete. Product line up includes a wide variety of anchors.

● A series can be applicable to a wide range of loads so that it is no need to own many lifting products.

● Easy handling help to increase a work efficiency. Lifting angle can be chosen freely and the safety has considered at suffi cient level.

● When locating concrete products at the stockyard, please use a lift seal to prevent waterfall into the head of the lifting anchor, also to prevent freezing.

■ Components for the System

● Ring Clutch: Dedicated jig for lifting (5 types as per loads)

● Lift Anchor: Embedded Anchor, 0.7 to 26tons

● Recess Former: Jig used with form panel to connect anchor(5types as per loads)

● Former Bolt: Bolt for connecting recess former. (w/One-touch-type)

● Former Plate: Jig for connecting recess former (for form panel, for demolding)

Mounting Methods  

Example of Use

Lifting Anchor System specification table

Ring Clutch

(Unit：㎜)

Standard of installation parts

(Unit：㎜)

＊1.25ton series has no b type, 26.0tons series: a type=M16, b type=M12

Lifting Anchor specifi cation table（Material: SM490A）

Product Features

Since the length is 23-35mm which is short, good for hanging light weight product, fixation of connectable plates.

Reduce the production cost by mass producton.

Specification

Unit: mm

Order will be available per case pack quantity

o: Standard inventory

*: Made to order product

How to apply

Product Features

• The product made by hy purity alumina ceramics that will not get rush
• Released the series from M12 to M24 for after the slab work
• Will not rust even with the bad condition, and also will not make contact corrosion when touching with the arrangement of bars.

Application

Mounting a rack of the information box, scaffold for PC bridge constraction work

Example of use:

Specification

Unit: mm

Construction specification

Unit: mm

 Resin name: GL-450 (NIHON DECOLUXE CO.,LTD)

How to apply

Product Features

• Stainless steel provides high-level dust resistance and durability.
• The shape of hook part provides strong tensile strength and prevents corotation.
• Material: SUS304 J3

Application

The pace of exposed at outside, cable boxes

Specification

Unit: mm

Stock: Stock available. Qty: Quantity per carton

o: Standard inventory

How to apply

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400 / SUS304）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product Features

• By adding special formed anchor plate at the edge of the insert, it adds up the fixed level to concrete
• Line up includes metric and Whitworth screw thread.
• Easy to install into form panel
• Material: SUSXM7 (M20 is SUS304)

Specification

Unit: mm

Stock: Stock available. Qty: Quantity per carton

*: Order made product

o: Standard inventory

How to apply

Product Features

• By adding special formed anchor plate at the edge of the insert, it adds up the fixed level to concrete
• Line up includes metric and Whitworth screw thread.
• Easy to install into form panel

Specification

Unit: mm

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

PF Jig

How to apply

Product Features

• By adding special formed anchor plate at the edge of the insert, it adds up the fixed level to concrete
• Length of the joint bar needs to be 10 times longer than the reinforcing rod diameter

Application

Specification

Unit: mm

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

How to apply

Product Features

By adding special formed anchor plate at the edge of the insert, it adds up the fixed level to concrete

Application

It is recommended for thin concrete

Specification

Unit: mm 

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

How to use

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400 / SUS304）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product Features

• The attachment with PQ insert with the is easy, by only single button press.
• Easy to remove mold from concrete brock
• Please use PQ jig for the mold
• The form factor of bottom parts will give a rong fix level to concrete
• Line up includes metric and Whitworth screw thread

Specification

Unit: mm 

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

PQ jig specification

How to apply

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400 / SUS304）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product Features

• It is no need to cover the thread hole by mortar, can be cover by the plug instead.
• Line up includes metric and Whitworth screw thread.

Application

When it requires waterproof to thread hole. When they need to hide the thread hole or require the good appearance of the concrete surface.

Specification

Unit: mm

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

How to apply

Product Features

• The insert has a plastic cover in order to classify the insert by applications.
• By setting PT jig on form panel, one person can handle all from inside of form panel by oneself.
• The form factor of bottom parts will give strong fix level to concrete.
• Line up includes metric screw thread and Whitworth.

Specification

Unit: mm 

Stock: Stock available. Qty: Quantity per carton

Surface treatment: M thread / Chromate, W thread / Uni-chromate

How to apply

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400 / SUS304）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product Features

• The insert has a plastic cover in order to classify the insert by applications.
• By setting PT jig on form panel, one person can handle all from inside of form panel by oneself.
• The form factor of bottom parts will give strong fix level to concrete.
• Line up includes metric screw thread and Whitworth.

Specification

Unit: mm

How to apply

Product Features

• The insert has a plastic cover in order to classify the insert by applications.
• The insert attaches to form panel via double-coated adhesive tape so no need to put holes for jig on form panels. Which is quite effective for when it needs to change locations.
• The form factor of bottom parts will give strong fix level to concrete.
• Line up includes metric screw thread and Whitworth.

Application

Specification

Unit: mm

How to apply

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400 / SUS304）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product name (Shape)	Specification (mm)		①Bolt		②Insert		③Concrete’s tensile strength			Remark
	thread	length	tracting (kN)	Shearing (kN)	trac ting (kN)	Shea ring (kN)	Fc=12 (N)	Fc= 30 (N)	Fc =60 (N)
P Insert	M6	30	4.72	2.71	26.46	15.2	2.65	4.19	5.92	Bolt: SS400
	M8	30	8.6	4.94	22.58	12.97	2.65	4.19	5.92
	M10	20	13.63	7.83	17.55	10.08	1.32	2.08	2.95
		30					2.65	4.19	5.92
	M12	40	19.81	11.38	17.55	17.48	4.41	6.98	9.87
		80					15.54	24.57	34.75
	M16	35	36.89	21.19	50.80	29.18	3.89	6.16	8.71
		50					7.21	11.4	16.12
		75					14.77	23.36	33.04
		100					24.9	39.37	55.68
	M20	100	57.57	33.07	108.52	62.34	25.95	41.03	58.03
PT Insert	M6	45	4.72	2.71	26.46	15.2	5.41	8.55	12.1
	M8	45	8.6	4.94	22.58	12.97	5.41	8.55	12.1
	M10	45	13.63	7.83	17.55	10.08	5.41	8.55	12.1
	M12	64	19.81	11.38	30.43	17.48	10.3	16.29	23.04
	M16	75	36.89	21.19	50.80	29.18	14.77	23.36	33.04
		95					22.67	35.84	50.69
PK Insert	W3/8	35	11.53	6.62	19.64	11.28	3.46	5.48	7.75
	W1/2	55	20.53	11.79	29.7	17.06	7.82	12.36	17.49
	W5/8	80	33.81	19.42	53.88	30.95	16.59	26.24	37.11
	M12	55	13.81	11.38	30.43	17.48	7.82	12.36	17.49
	M16	80	36.89	21.19	50.8	29.18	16.59	26.24	37.11
PQ Insert	M10	40	13.63	7.83	17.55	10.08	4.38	6.93	9.81
	M12	40	19.81	11.38	30.43	17.48	4.41	6.98	9.87
		50					6.58	10.41	14.72
	M16	45	36.89	21.19	50.80	29.18	6	9.49	13.42
		60					9.93	15.7	22.2
FCI Insert	M10	43	11.89	6.84	–	–	5.28	8.35	11.81	Bolt: SUS304
	M12	60	17.28	9.94	–	–	9.58	15.15	21.43
	M16	65	32.18	18.52	–	–	12.53	19.81	28.02
		75					16	25.31	35.79
		85					19.89	31.45	44.48
	M20	100	50.22	28.91	–	–	27.57	43.59	61.65
	M22	110	62.11	35.75	–	–	32.73	51.75	73.19
	M24	120	72.36	41.65	–	–	39.38	62.26	88.05
SUS-IP Insert	M6	30	4.12	2.37	19.7	11.37	2.57	4.07	5.75
	M8	30	7.5	4.31	16.81	9.7	2.57	4.07	5.75
	M10	30	11.89	6.84	13.07	7.54	2.57	4.07	5.75
		50					6.41	10.14	14.35
	M12	40	17.28	9.94	22.66	13.07	4.31	6.83	9.65
		50					6.46	10.22	14.46
		80					15.36	24.29	34.75
	M16	50	32.18	18.52	39.04	22.53	6.59	10.42	14.74
		75					13.9	21.98	31.09
		100					23.77	37.59	53.16

Product Features

• The product has strong characteristic at the form of bottom part of insert which provide strong fix level to concrete
• Line up includes metric screw thread and Whitworth screw thread.
• Material: SWRCH

Application

Specification

Unit: mm

How to apply

Product Features

● Due to the production on order, anchor parts has flexibility to choose a deformed bar or round steel bar, and also be able to appoint shape and length as well.

● Has been widelly used such as demolding of PC slab,  lifting etc,

● High nut parts have electro galvanizing for its standard specification.

Application

Specification

(Unit：mm)

Mounting Methods

Product Features

● Can be used when need insert for same location at both sides of wall.

● Single insert has two threads that secure acculate dimentions, and no need to use angle etc to set inserts as it could fi x with jig with other end of thread, which provide high work efficiency

Application

Insert for party wall of housing

Specification

(Unit：mm)

Stock：Stock available, Qty：Quantity per carton

Mounting Methods

Product Features

● Can be used when need insert for same location at both sides of wall.

● Single insert has two threads that secure acculate dimentions, and no need to use angle etc to set inserts as it could fi x with jig with other end of thread, which provide high work efficiency

Application

Insert for party wall of housing

Specification

(Unit：mm)

Stock：Stock available, Qty：Quantity per carton

Mounting Methods

Product Features

●It is inside threaded with a pin hole at its end for jointing reinforcing bars so as to prevent stripping and spread load evenly inside the concrete.

●When the countersunk plate is thin, joint reinforcing bars are used to carry some load, thus the inserts are not heavily-loaded.

●The length of joint bar need to be 10times longer than diameter of the joint bar. (It is recommended to be more than 20times longer.)

●Please use the bar of maximum diameter for pin hole.

●Material：SUS304

Application

Stripping of precast concrete plates, tumbling of heavy-duty concrete units, construction.

Specification

(Unit：mm)

Stock：Stock available, Qty：Quantity per carton

Mounting Method

Product Features

● Deformed bar with inside threaded, and has D-shaped hook to add the cohesiveness with concrete.

● Thread size is available for each size of joint bars for the concrete joint.

● Material：SUS304

Application

Suspending heavy products,stripping and jointing concrete’s gaps

Specification

(Unit：mm)

Stock：Stock available, Qty：Quantity per carton

Mounting Method

Product Features

●Deformed bar with inside threaded, and has suffi ent cohesiveness with concrete.
● Material：SUS304

Application

Suspending scaffolds,jointing parts, lifting, construction, stripping and jointing concrete’s gaps.

Specification

(Unit：mm)

Stock：Stock available, Qty：Quantity per carton

Mounting Methods

Product Features

● It is made with inside threaded deformed bar, and can be used and can be used as a level-adjusting insert for fl at plates.

●Due to its thorough-threaded, it has a longer eff ective threaded area than other inserts.

●Material: SD345（SD295A）

Application

Level-adjusting fl at plates, jointing sheet products.

Specification

(Unit：mm)

Qty：Quantity per carton

Mounting Methods

Product Made in Japan
Manufacturer: Japan Life

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Product Features

● It is inside threaded with a pin hole at its end for jointing reinforcing bars so as to prevent stripping and spread load evenly inside the concrete.

● When the countersunk plate is thin, joint reinforcing bars are used to carry some load, thus the inserts are not heavily-loaded.

● The length of joint bar need to be 10times longer than diameter of the joint bar. (It is recommended to be more than 20times longer.)

● Please use the bar of maximum diameter for pin hole

●Material：SD295A (SD345)

Application

Stripping of precast concrete plates, tumbling of heavy-duty concrete units, construction.

Specification

(Unit：mm)

Qty：Quantity per carton
Surface treatment：M thread/Chromate W thread/Uni-chromate

Mounting Methods

Selection of JL Inserts

At the selection of JL Inserts,please consider below factors and apply the minimum values.

① The bolt (Subject to SS400）
② The Insert
③ Concrete’s tensile strength

Please apply minimum values of ①②③ and fully consider the safety factors.

Concrete’s tensile strength in the chart is base on HANDBOOK of VARIOUS SYNTHE TIC CONSTRUCTIONDESIGN of Archtecural Institute of Japan.
Tensile strength = φ1× ×π×le(le+d)×0.313209（FC = N/mm2）
φ1＝ 0.6（short-term load）

Unit: kN

Product Features

● It is made with inside threaded deformed bar, with a Y hook at its bottom to increase cohesiveness with concrete.

● Various kind of threading are available to match the dimensions of reinforcing bars used for jointing concretes’s gaps.

● Material：SD295A (SD345)

Application

Lifting heavy duty products, jointing construction of concrete, stripping.

Specification

(Unit：mm)

Qty：Quantity per carton
Surface treatment：M thread/Chromate W thread/Uni-chromate

Mounting Methods

Product Features

● Deformed bar with inside threaded, and has suffien cohesiveness with concrete.
● Material：SD345 (SD295A)

Application

Suspending scaffolds, jointing parts, lifting, construction, stripping, and jointing concrete’s gaps

Specification

(Unit：mm)

Qty：Quantity per carton
Surface treatment：M thread/Chromate W thread/Uni-chromate

Mounting Methods

You can use it by pushing in and rotate it 90 ° to finish fixing.
This is a very convenient item because it takes less time than the screw type.
The inserts can be easily attached to and removed from the formwork, saving labor and time.

Using Example

How to use

* How to attach the hanger.

Push the hanger to the bottom of the insert, and if the blue part of the bar is visible in the shackle, hold the handle and turn 90 degrees to the right.

Rotate. Please confirm that the lock is applied.

Then, slightly turn the resin nut to the right. The insertion position of the jig is fixed.

Please note that if you tighten it too much, it may not be possible to reverse it.

* How to remove the hanger.

Reverse procedure, turn the resin nut to the left to loosen, push the handle and rotate 90 degrees to the left to unlock,

Remove the hanger.

Product details

Maximum lifting load (2 points hanging)

* The total length can be adjusted with the slide cap.

You can use it easily by pushing in and rotate 90 ° to finish inserting.
One-touch Insert for hanging is a very convenient item since it help you to save time and effort.

Using Example

How to use

* For mounting on the formwork.

Drive it into the frame mounting jig with a plastic hammer.

* How to attach the hanging insert.

Push and rotate it 90 degrees to the right, and check that it is locked.

* How to remove the hanging insert.

Push it inward to unlock, rotate 90 degrees to the left, and pull it up.

Maximum lifting load

* Since the diagonal suspension of LKP-95 has not been verified, it is calculated based on the value of LKP-55 / 75.

* SSKP can also be used by setting a special road tack after construction.

The workability of inserting and removing inserts has been dramatically improved! !

Features

• With only one hand, you can attached the insert to the formwork.
• Compared with other conventional inserts, the dropouts during placement of insert with S cap are dramatically reduced.
• No need to remove bolts when removing from the formwork.
• There is no need to prepare and install a protective cap.
• The position of the insert with S cap is almost flush.

Models

SFB/SFBH S Cap for FB/FBH Insert

SFT/SF2 S Cap for FT/F2 Insert

SFD/SFDH S Cap for FD/FDH Insert

SFD/SFDH S Cap for FD/FDH Insert (D Type)

SFDC S Cap for FDC Insert

T Driver for S Cap

S cap formwork mounting jig, jig hole filling.

Using Example

How to use

1. Attach S cap with Insert

2. Place the Insert

3. The head automatically break when remove the form work.

Size Table

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

* Custom sizes are also available, sizes not shown in the table, dacro treatment, and stainless steel inserts. Please contact us.

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

* Custom not shown in the table, dacro treatment, and stainless steel inserts are also available. Please contact us.

Product Detail

Product Detail