Description

Hydro-Transporter are ideal for moving cabinets, safes, boxes or machines.

They are easy and safe in use. One transporter consists of 2 transport units and two belts to connect.

The transport units are attached on the sides of the load and connected with the standard belt.

After pumping up the movable part of the transporter on both sides the load is lifted and ready for moving

Both transport units are easy to transport together.

Scope of delivery: 2 transport units, 2 connecting belts (5m)

Steering can be done by the top link bars on each unit, connected with the big wheels equipped with ball bearings.

The linkage guarantees that the wheels are always in parallel direction.

High lifting height: 180 mm

The load capacity specifications refer to a maximum speed of 2 km/h.

Specification

Specification

Specification

Specification

Specification

Specification

Specification

Specification

Specification

Specification

Description

The JUWAthan® castor design features a steel core around which the coating is molded.

Manufacturers press two precision ball bearings into this steel core.””A special polyurethane-based compound coats an aluminum core in this design

“”Based on the JUWAthan®plus castor, developers created the JUWAthan® Professional series castor.”

The side-by-side double castor system provides higher load capacity (2×2 ball bearings) and offers greatly reduced rolling resistance.

The load capacity specifications refer to a maximum speed of 2 km/h.

Specification

Description

Set of forklift clamps with tie-down straps for binding and securing.

Secure valuable and unstable loads against slipping.

Each set includes 2 screw type fork clamps, 2 eye type fork clamps and 2 tie-down straps.

Simply place on forklift forks, secure with lashing chain and go.

Easy maneuverability.

Simply attach the screw type fork clamps to the forks behind the load.

More safety for movement of top heavy loads.

Slide eye type fork clamps onto the tips of the forks and strap load in between for safe transport.

Specification

Manufacturer: Jung

Model: JLT Series: JLT 3, JLT 15

Description

Forklift turntable for maneuvering heavy loads with a forklift truck.

Thrust bearing supported turntable with anti-slip load pad.

Simply place on forklift forks, secure with lashing chain and go.

Easy maneuverability. Simply attach the screw type fork clamps to the forks behind the load.

More safety for movement of top heavy loads.

Slide eye type fork clamps onto the tips of the forks and strap load in between for safe transport.

Simply place on the forklift forks and go.

Reversed side equipped with anti-slip pads.

Capable of moving loads forward and in reverse.

Usable as steerable support for 3 tons or 15 metric tons.

Specification

Manufacturer: Jung

Model: JRH 3

Description

Forklifts hitch for pushing and pulling loads. Includes lashing chain to secure to forklift truck.

Suitable for all JUNG trolleys outfitted with a towing eye. 3 metric tons traction force

Simply place on forklift forks, secure with lashing chain and go.

Easy maneuverability Capable of moving loads forward and in reverse.

Specification

Description

Unrivalled: Small and lightweight trolleys at super high capacity.

Steerable transport trolleys with pivoting cassettes for a better load distribution at all castors and the floor.

All transport trolleys are ready for use: the steerable transport trolley is fitted with a ball bearing supported turntable and a handlebar.

The adjustable-width transport trolley consists of two transport units and connecting bars.

The double castor design results in dramatically easier steering due to reduced friction forces in curves.

The much lower friction resistance also causes the castors on the rear axis to follow in a true to track course.

The load capacity specifications refer to a maximum speed of 2 km/h.

Specification

Description

From JLB 20 up, pivoting cassettes and axles within the frame assure even pressure distribution across all castors and across the floor.

No need for complex and expensive hydraulic compensation system.

The double castor design results in dramatically easier steering due to reduced friction forces in curves.

The much lower friction resistance also causes the trolleys on the rear axis to follow in a true to track course.

All transport trolleys are ready for use: The steerable transport trolley is fitted with a ball bearing supported turntable and a handlebar (as shown in picture).

The adjustable-width transport trolley consists of two transport units and connecting bar.

The load capacity specifications refer to a maximum speed of 2 km/h.

Specification

DESCRIPTION

Stroke max. 50 mm. The load can be moved in the extended state.

Practical, with battery and handy remote control. The remote control can be switched from two-handed to one-handed operation (flexible left/right).

The one handed operation allows to move the trolley exactly straight ahead.

High running time (at full load under ideal conditions) by directdriven motor.

Low charging time. JLA-e 5/12 G = 3-4 h; JLA-e 15/30 G = 5-7 h;

Alternatively high-speed charger = 2,5-3,5 h. Available as accessory.

Spare a towing vehicle 360° maneuverable.

Infinitely variable speed. Very compact dimensions. Compatible with series G (p.
58-59). Transport trolleys are not included.

LiFePo4 battery technology

Specification

Description

Practical, with battery and handy remote control! The remote control can be switched from two-handed to one-handed operation (flexible left/right).

The one-handed operation allows to move the trolley exactly straight ahead. Spare a towing vehicle. Very compact dimensions.

Low charging time.Alternatively high-speed charger = 2,5-3,5 h. Available as accessory.

Batteries are interchangeable. High running time (at full load under ideal conditions) by directdriven motor. 360°maneuverable.

Infinitely variable speed. Compatible with series G (p. 58-59) and series H (p. 60-61). Transport trolleys are not included LiFePo4 battery technology. A cable remote control is available on request.

Specification

Description

Set 2 includes:
JLA-p 15/30 G includes control unit

Hose cart complete with hose reel

30 m air supply hose with Ø 19 mm

1 Liter oil for pneumatic motors

400 ml chain spray (not overseas)

Set 3 additionally includes:

Transport trolley JFB 15 G (see page 58)

Specification

Description

Ecofriendly, uses only compressed air. Spare a towing vehicle.

Low maintenance propulsion system.

No need to charge any batteries. 360° maneuverable.

Compatible with G-series transport trolleys (page 58-59).

All hoses are detachable for compact and easy transport.

Quick set up. Connect air supply hose and go.

Requires standard shop air connection with 8 bar (116 psi) and air volume of 1500 L ⁄ min (25 L ⁄ s) or (53 SCFM).

Infinitely variable speed and direction.

Model JLA-p 15 / 30 G includes the trolley and remote control unit.

Two air motors are independently controllable by two joysticks.

Maneuverability: Forward, reverse, in place turning.

Higher capacities available on request.

Specification

Description

Safe transport of ISO-containers and special containers up to 36 metric tons.

Containers can be moved with extremely low installation height.

Assembled in two parts for easy handling and storage.

Compatible with all ISO containers.

Lockable twistlock version to ISO dimension 2.26 m (not adjustable).

Optionally a trapezium drawbar can be adapted.

The dimension of the traverse is within the container contour.

The load is firmly connected to the chassis and can be completely loaded.

Installation height of the crossbar: 80 mm.

Specification

*Load must rest on the crossbar as a surface load

DESCRIPTION

“Twistlock” version for outdoor transport for use on pavement includes turntables fitted with “Twistlock” to secure containers to transport trolleys. Including 2-parts connecting bars fixed length 2.26 m and pulling handle with towing eye.

Safe transport of containers.

Containers can be moved with extremely low installation height.

Lock-to-hold mechanism between the trolley and the containers (Twistlock).

Compatible with all ISO-containers.

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Safe transport of containers

Containers can be moved with extremely low installation height.

Form-fitting-hold between the trolley and the containers (Weldon Cone System).

Compatible with all ISO-containers. The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Big castors Ø 140 mm x width 59 mm provide optimal rolling characteristics on uneven surfaces and rough pavements.

Safely overcomes small ledges, cracks in the concrete and countersunk rail tracks.
Custom solutions available.

Multi-purpose use: also usable as two single trolleys, each with half of the combined load capacity. No additional accessories needed. Comes with two towing bars.

The load capacity specifications refer to a maximum speed of 2 km/h.

Specification

DESCRIPTION

Tandem transport trolley for loads with no leading or trailing edge center support.

The double castors design results in dramatically easier steering due to reduced friction forces in curves.

The much lower friction resistance also causes the castors on the rear axis follow in a true to track course.

Non-marking support wheels. Ready for use: delivery includes 2 steering units, 2 towing bars and 1 set of connecting rods.

Multi-purpose use: also usable as two single trolleys, each with half of the combined load capacity. No additional accessories needed.

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Pivoting roller cassettes within the frame (except for JLB 16 S) assure even pressure distribution across all castors and across the floor.

Very low height at only 125 mm, with high capacity and low own weight.

Slim castor design (60 mm fitting length) results in easier steering due to reduced friction forces also in curves.

The load capacity specifications refer to a maximum speed of 2 km/h.

All transport trolleys are ready for use: the steerable transport trolley is fitted with a ball bearing supported turntable and a handlebar (as shown in picture).

The adjustable-width transport trolley consists of two transport units and connecting bars.

SPECIFICATION

DESCRIPTION

Combines leading swiveling castors with trailing rigid castors.

Swiveling lead-castors make steering easier by up to 80%.

Ergonomic: Reduces handling effort for user.

Better directional stability on long straight-line paths with trailing rigid castors.

Trolleys can be used as steerable, adjustable or tandem trolley. Low installation height. Low weight.

Extreme maneuverable with thrust bearing supported, antislip turntable. Ideal for transporting loads on slalom paths including 90 trueto-course straightline, turning and sideways maneuvering.

Floor protective, non-marking coating.

Each trolley can be used for either steerable or straight-line movements.

An additional pulling handle for steering of rear-trailing trolleys for tighter turning radius is included in the set

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATON

DESCRIPTION

JKB 10 G/JKB 14 G have same height as transport trolleys series G.

Connecting bars as standard2000 mm, can be offered up to 3 m length.

High load capacity at low weight.

Bearing supported swiveling castors allow 360° maneuverability.

All products are also available in a set of two with price advantage.

In addition, all the trolleys have a platform center hole to allow attachement to the load.

Unrivalled: The narrow castors reduce rolling and turning resistance to a minimum.
Pulling handle and connecting bars available as accessories (see pages 66-67).

For choosing the adequate revolving trolley we recommend a load of two-third of the maximum capacity.

This will be the most advantageous compromise between payload, ergonomics and handling of the devices.

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Optional connecting bars can be fixed without tools by clamping down on adapter.

High load capacity at low weight. Bearing supported swiveling castors allow 360° maneuverability. Mix and match revolving trolleys with transport trolleys: JKB 2 to JKB 8 have same height as transport trolleys series K.

All products are also available in a set of two with price advantage.

In addition, all the trolleys have a platform center hole to allow attachement to the load.

Using the slots in the platform, the trolleys JKB 4 – 8 can be affixed to the load with standard lashing belts.

Pulling handle and connecting bars available as accessories (see pages 66-67).

Unrivalled: The narrow castors reduce rolling and turning resistance to a minimum.

For choosing the adequate revolving trolley we recommend a load of two-third of the maximum capacity. This will be the most advantageous compromise between payload, ergonomics and handling of the devices.

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

The double castor design results in dramatically easier steering due to reduced friction forces in curves.
The much lower friction resistance also causes the trolleys on the rear axis to follow a true-to-track course. Non-marking support wheels.
Higher capacity with professional castors, at the same dimension as series K trolleys.
The series K handlebars are now also available with a removable handle, which is also available as a re-fitting set.
Because of the professional castors you need 30% less power for steering.
All transport trolleys are ready for use: the steerable transport trolley is fitted with a ball-bearing supported turntable and a handlebar.
The adjustable-width transport trolley consists of two transport units and a connecting bar.
The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Equipped with highest quality castors as standard.

Reduced weight due to advanced construction of load cassettes.

Non-marking support wheels. The K-series towing bars are also available with a removable handle. The removable handle is also available as a re-fitting set.

All transport trolleys are ready for use: The steerable transport trolley is fitted with a ball bearing supported turntable and a handlebar.

The adjustable-width transport trolley consists of tw transport units and connecting bar.

The load capacity specifications refer to a maximum speed of 2 km/h.

SPECIFICATION

DESCRIPTION

Sturdy construction, yet lightweight and easy to handle.

Pressure limiting valve provides safety against overloading.

Optimally compatible with our hydraulic jacks.

JPL 15 with adjustable working pressure.

Pumps are equipped with integrated quick-lift for faster working

Specification

DESCRIPTION

Quick connectors with drip free rapid closure valves.

One oil circuit capable of supplying two or four hydraulic jacks.

Easily controllable: JPE 30- NVR with precision lowering regulator.

Sturdy two stage electric pumps available in different versions.

Easy handling. Includes transport cart for easy and safe transport.

Also available as 110 V, 50 Hz.

Maximum safety during operation due to cable remote control.

SPECIFICATION

DESCRIPTION

Synchronized lifting and lowering of multiple jacks. For loads with decentralized center of gravity. Simple and safe.

Easy operation via push button (remote control).

All slave-cylinders equipped with 520 bar safety pressure valves. Controls monitor pressure switches with LED indicator preventing any possible overloading.

Clear and simple control unit, adjustable to control all or individual jacks. Also configurable for using three-point lifting system.

The complete system is mobile and conveniently mounted on a cart.

Retracting of the hydraulic jacks also without load (JH 15 – 20 G plus EX).

Load independent, maintains constant lifting speed.

Controllable lowering speed. Electrical pump JPE 30 and VScontrol unit for driving individual lifting devices.

Oil volume in the system JD 40 E+ VS is sufficient for up to 4 pcs. JH 10 G plus / JH 10 G plus EX / JHS 10. Larger jacks can be operated, but you need to lift twice to reach the full stroke.

The cylinders in the pressure block are outfitted with spring returns to retract the pistons automatically.

Specification

The post Jung JD Series Hydraulic Pressure Block first appeared on Kouei Japan Trading | Get Quotation.]]> https://koueitrading.com/global/product/jung-jhs-series-hydraulic-jack-sets/ Sat, 14 Nov 2020 07:49:24 +0000 https://koueitrading.com/global/?post_type=product&p=90701 Made in Germany Manufacturer: Jung Model:  JHS Series: JSET 5/2, JSET 10/2,JSET 10/3 JSET 20/3,JHS 5, JHS 10, JSET 10/3 KU, JSET 20/3 KU, JHS 10 KU Description 180° revolving housing, this allows the jack to be placed with long or with short feet to the load, if there is no space available under it. […]

Description

Slide shoe design inside the guiding track prevents twisting of the piston inside the lifting cylinder.

This guarantees better force distribution, less friction and reduced wear compared to conventional jacks (see pict. 2). JH 15/JH 20 G plus serial outfitted with fast stroke. Also available with spring return.

Reduced maintenance costs due to easy change slide shoes and removable pump unit.

Extremely lightweight with high performance due to the use of highquality material and innovative design.

Continuous adjustment to the load due to swiveling safety toe.

Secure stability in every situation even in lifted position (see picture 3).

Die-forged steel toe provides impact resistance.Safe operation due to ergonomic lowering screw.

Specification

Description

Integrated spring return retracts piston automatically (see picture 1) on JH 15 up to JH 30 G plus Ex.

Slide shoe design inside the guiding track prevents twisting of the piston inside the lifting cylinder. This guarantees better force distribution, less friction and reduced wear compared toconventional jacks (see pict. 2).

Reduced maintenance costs due to removable stroke unit and easy to change slide shoes.

Extremely lightweight with high performance due to the use of high-quality material and innovative design.

Continuous adjustment to the load due to swiveling safety toe.

Secure stableness in every situation even in lifted position (see picture 3).

Specification