Tachometer | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Fri, 26 Jan 2024 04:17:41 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.5 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png Tachometer | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 Line Seiki TM-7 Series Digital Tachometer (Hand-held Type) https://koueitrading.com/global/product/line-seiki-tm-7-series-digital-tachometer-hand-held-type/ Sat, 26 Jun 2021 02:44:35 +0000 https://koueitrading.com/global/?post_type=product&p=16043 Product Made in Japan Manufacturer : Line Seiki Model : TM-7 Series Description The TM-7000/7010/7010E series is a hand-held Non-Contact Tachometer. Non-contact measurement performance has improved through the adoption of laser technology. The highly visible laser makes measurement adjustment easy. Contact measurement is available with contact adaptor TM-7013. It measures rotational and linear speeds of […]

The post Line Seiki TM-7 Series Digital Tachometer (Hand-held Type) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer : Line Seiki
Model : TM-7 Series

Description

  • The TM-7000/7010/7010E series is a hand-held Non-Contact Tachometer.
  • Non-contact measurement performance has improved through the adoption of laser technology.
  • The highly visible laser makes measurement adjustment easy.
  • Contact measurement is available with contact adaptor TM-7013.
  • It measures rotational and linear speeds of up to 99999.9 rpm.
  • TM-7010/7010E can convert measured value instantly to different units of measurements (RPM, RPS, m/min, cm/s, inch/s, ft/min and yd/min).
  • Up to 25 measured values can be stored in internal memory.
  • The TM-7020 is a hand-held contact only tachometer.
  • It measures rotational speeds of up to 6000 rpm.

Model

TM-7000 TM-7000 main unit
Reflective tape, 10 pcs.
AAA alkaline battery, 4 pcs.
Instruction manual
TM-7010 TM-7010 main unit
TM-7010E TM-7010E main unit
TM-7000K TM-7000 main unit
+
Contact adaptor
Reflective tape, 10 pcs.
Rubber tip, 3 pcs.
Surface speed wheel (1/10 m) 1 pc.
AAA alkaline battery, 4 pcs.
Instruction manual
+
Carrying Case
TM-7010K TM-7010 main unit
+
Contact adaptor
TM-7010EK TM-7010E main unit
+
Contact adaptor
TM-7013 Contact adaptor Rubber tip, 3 pcs.
Surface speed wheel (1/10 m), 1 pc.
TM-7020 TM-7020 Main Unit,Rubber Tip, 3 pcs.
Surface Speed Wheel (1/10m), 1 pc.AAAAlkaline Battery, 4 pcs..
Instruction manual
TM-7020K TM-7020 Main Unit,Rubber Tip, 3 pcs.
Surface Speed Wheel (1/10m), 1 pc.AAAAlkaline Battery, 4 pcs..
Instruction manual + Carrying Case

Components

Specification

Model TM-7000 TM-7010 / TM-7010E TM-7020
Measuring Range (Non-contact) 6.0 – 99999.9 r/min 6.0 – 99999.9 r/min
0.10 – 1666.66 r/sec		 Prescale
Mode0.1 –
99999.9/min
0.01 –
9999.99/sec		 –
Measuring Range
(TM-7000/
TM7010/
TM-7010E
with contact adaptor)		 6.0 – 15000.0 r/min 6.0 – 15000.0 r/min
0.10 – 250.00 r/sec
0.60 – 1500.00 m/min
1.00 – 2500.00 cm/sec
0.65 – 1640.41 y/min
0.10 – 1666.66 r/sec
0.39 – 984.25 in/sec
1.9 – 4921.25 f/min		 1.0 – 6000.0 r/min
Resolution 0.1 r/min 0.1 r/min・f/min, others 0.01 0.1 r/min
Accuracy ±0.01% ±1digit ±0.01% ±1digit(r/min・m/min)
±0.05% ±1digit
(Other units including conversion accuracy)		 ±0.01% ±1digit
Sampling Time 1.0 – 10.0 seconds (1.0 – 2.0 seconds, with contact adaptor) 1.0 – 2.0 seconds
Display Measurement Display : 6 digits, 7 segment LCD ( except TM-7020 )
Low-battery:  mark Laser On: mark
On target:  mark Contact Measurement: mark
Display unit : /min Display unit : /min, /sec, m/min
cm/sec, y/min *, in/sec *, f/min *
Memory display : MEM1 – 25, MAX, MIN
Prescale Mode Indicator: PS		 Display unit : /min
Prescale Range – 0.001 – 999.999 –
Auto Power-off After 3 minutes from last measurement or key operation
Data Hold Time Measurement data: until the next data is defined
– Memory data: same as battery life –
Measuring Method Non-contact measurement: using the main unit
(with reflective tape)
Contact type measurement: using contact adaptor
(with rubber tip or surface speed wheel)		 Contact type measurement :
using the main unit
(with rubber tip or
surface speed wheel)
Optical System
(Except TM-7020)		 Light Source: Laser, Class 2
Operating Range: 50 – 1000 mm, ±40degrees
Wavelength: 650 nm, CW
Power Output: Max. 1mW
Power Supply 4pcs. of AAA alkaline battery
Battery Life with
continuous
measurement		 approx. 30hours approx.15hours approx. 30hours
Backlight – Blue(Auto-Backlight Off after
10 seconds of inactivity)		 –
Temperature Operating Temp. 5 – 40°C Storage Temp. -10 – +60°C(Non-Freezing)
Operating Humidity 35 – 85%RH (Non-Condensing)
Dimensyon/Weight
(Battery Included)		 125(H) x 58(W) x 27.4(D)mm / 140g 144(H) x 58(W) x 36(D)mm / 170g

* These measuring units are only available in TM-7010E

Option

Code Description
ZTM051 Reflective Tape, 10 pcs.
ZTM004-SET Rubber Tip, 3 pcs.
ZM4052 Surface Speed Wheel (1/10 m), 1 pc.
ZM4053 Surface speed wheel (1/10 y), 1 pc.
C-7000 Carrying Case (TM-7000 / 7010 / 7010E)
C-7020 Carrying Case (TM-7020)

Application

Maintenance in factory and building

The hand-held tachometer can be effectively used for monitoring the rotation speed of generators, conveyors, fans, motors, and a wide range of other machinery and equipment, making it an incredibly versatile tool for various applications.

Other items of Line Seiki
Request the quotation for Line Seiki

The post Line Seiki TM-7 Series Digital Tachometer (Hand-held Type) first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki F90 Series Rate Indicators / Controllers https://koueitrading.com/global/product/line-seiki-f90-series-rate-indicators-controllers/ Fri, 26 Jun 2020 02:44:48 +0000 https://koueitrading.com/global/?post_type=product&p=16045 Product Made in Japan Manufacturer: Line Seiki Model: F90 Series Description The F90 Series is a panel-mounted Rate Indicator/Controller featuring a 6-digit red LED display with a digit size of 14.22×7.8mm, ensuring ease of reading even in dimly lit environments. This Controller type is fully programmable through the front panel keys, offering user-friendly customization. The […]

The post Line Seiki F90 Series Rate Indicators / Controllers first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: F90 Series

Description

The F90 Series is a panel-mounted Rate Indicator/Controller featuring a 6-digit red LED display with a digit size of 14.22×7.8mm, ensuring ease of reading even in dimly lit environments. This Controller type is fully programmable through the front panel keys, offering user-friendly customization.

The panel size is DIN 48×96, with a panel cut-out size measuring 45x92mm. The controller model provides three output types: Upper/Lower Limit output, Analog output, and BCD output.

Additional features include a Prescale function, multi-decimal point position adjustment, and a Key Lock function. The built-in memory ensures that the unit retains the last measured value, even in the event of an accidental power supply interruption.

Specification

Model F90-101 F90-103 F90-201 F90-203
Type MONITOR TYPE UPPER / LOWER LIMIT PRESET TYPE
Output Option – Analog – Analog
Display Red LED 14.22 x 7.8mm Measuring Display: Red LED 10.5 x 5.5mm

Preset Display: Green LED 8.0 x 4.0 mm
Number of Digits 6
Display Range 0.0001 – 999999
Decimal Point Position 4th decimal point position max.
Scale Range 0.11 – 20KHz (1pulse / revolution : 6.6667 – 120000rpm)
Preset Level – Upper / Lower Limit
Measuring Method 1/TAU standard sampling : X’tal 2MHz ±50ppm
Measuring Accuracy ±0.008% reading ±1 digit (multiplier = 1.0000, divider = 1, -5 – +50°C )
Sampling Time 0.5 – 10 seconds (sampling time is changed automatically by pulse interval)
Up-date Time Every sampling or 1 – 99seconds (maximum)
Input Signal Contact inpu t: sink current 2mA

Open collector input sink current : 2mA L : 0 – 1.9V

Voltage input : input impedance 3KΩ L : 0 – 1.9V H : 3.5 – 30V (P-P3.5V min.)

Magnetic sensor input : input impedance 3KΩ L : -0.6 – -17V H : 0.6 – 17V
Input Frequency Contact input 0.11 – 25Hz minimum pulse width 20msec

Open collector or Voltage input 0.11H – 20KHz minimum pulse width 25msec

Magnetic sensor input 0.11 – 20KHz minimum pulse width 25msec

(L: -0.6Vmax. / H : 0.6Vmin)
Prescale Multiplier: 0.0001 – 100

Divider: 1/1 – 1/9999 (can be used at the same time)
Overflow At every sampling, when the measured data is over 6 digits, “—–” is displayed
Memory Prescale value, upper/lower limit value and up date-time are retained for 10 yrs. by E²PROM (rewrite 10000 times)
Keylock Prescale value, upper/lower limit value (exclude monitor type) and up date-time are inhibited to be changed.

Contact input, Open collector input (sink current 7mA L : 2Vmax)
Output Inhibition – Upper / Lower Limit output inhibition

Contact input, Open Collector input

(sink current 7mA L : 2Vmax)
Upper / Lower Output – Type 1C relay contact (AC250V/0.5A or DC30V/2A)
BCD Output Parallel open collector negative logic output

Each output 30VDC/20mA/50mW max.

Output saturation voltage 0.75V (typ)/20mA

Half pitch 36P connector : JAE TX20A-36R-D2LT-A1L

Adapter Plug : JAE TX20A-36PH1-D2P1 1m cable
Analog Output Frequency voltage converter method

Voltage Output : 0.1 – 10V (1KΩ min.) ±0.5%FS

Current Output : 4.16 – 20mA (500W max.) ±0.5%FS Output Ripple : 20mVp-p max.

3 Ranges: 20 – 200Hz, 200 – 2KHz, 200 – 20KHz selectable by dip-switches (Select voltage or current output).
Sensor Supply
Power Source		 12VDC ±10% 100mA max. (Analog output is 50mA maximum)
Power Supply 100 – 240VAC -15% +10% (85 – 264VAC) 50/60Hz
Power Consumption Approximately 6VA
Operating Temperature -5 – +50°C (Non-freezing)
Operating Humidity 45 – 85%RH (Non-condensing)
Weight Approximately 280g

Front Panel Parts

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki F90 Series Rate Indicators / Controllers first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki TM-5 Series Hand Tachometer https://koueitrading.com/global/product/line-seiki-tm-5-series-hand-tachometer/ Fri, 26 Jun 2020 02:44:41 +0000 https://koueitrading.com/global/?post_type=product&p=16044 Product Made in Japan Manufacturer: Line Seiki Model: TM-5 Series Description The TM-5000/5010 series represents a versatile hand-held Tachometer, offering both Non-Contact and Contact measurement capabilities. It effectively measures rotational and linear speeds, accommodating readings of up to 99,999.9 rpm. What sets it apart is its ability to instantly convert measured values into various units […]

The post Line Seiki TM-5 Series Hand Tachometer first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: TM-5 Series

Description

The TM-5000/5010 series represents a versatile hand-held Tachometer, offering both Non-Contact and Contact measurement capabilities. It effectively measures rotational and linear speeds, accommodating readings of up to 99,999.9 rpm. What sets it apart is its ability to instantly convert measured values into various units of measurement, including RPM, RPS, m/min, cm/s, inch/s, ft/min, and yd/min.

The device boasts an internal memory that can store up to 8 measured values, enhancing convenience and data retention. To enable measurements in hard-to-reach areas, a Remote Sensor is included, further extending its usability.

Being portable and user-friendly, the TM-5000/5010 series requires no specialized skills to operate. It is available in a Kit type, which includes everything necessary to get you started.

Furthermore, it complies with CE and RoHS standards, emphasizing its commitment to quality and safety.

Model

Specification

Model TM-5000 TM-5010
Measuring Range 6.0 – 99999.9r/min
6.0 – 99999.9 r/min
0.10 – 1666.66 r/s
0.60 – 9999.99 m/min
1.00 – 16666.6 cm/s
* 0.39 – 6561.65 inch/s
1.9 – 32808.3 f/min
0.65 – 10936.1 y/min
Resolution 0.1r/min 0.1rpm, fpm, others 0.01
Accuracy ±0.01% ±1digit r/min, m/min (for other units, the conversion accuracy is ±0.05% ±1digit)
Sampling Time . 1.0 – 10.0seconds
Display Display : 6digits, 7segment LCD

Battery alarm :  mark

Reflective light : ((( mark
Display unit : r/min Display unit : r/min, r/s, m/min, cm/s
*[ inch/s, f/min, y/min ]Memory display : MAX, MIN, MEM1 – 8
Auto Power-off . After 3 mins. from the last measurement or key operation.
Data Hold Time Measurement data: until the next data is defined.
– Memory data: same as battery life
Measuring Method Non-contact measurement using the main unit or with remote sensor (use with reflective tape)

Contact measurement using the in-contact adaptor (use with rubber tip, surface speed wheel)
Measuring Distance 50 – 300mm (using reflective tape)
Power Supply 4pcs. of AAA alkaline battery (a continuous measurement of 20hrs.)
Operating Temp. 5 – 40°C(Non-freezing)
Storage Temp. -10 – +60°C(Non-freezing)
StorageHumidity 35 – 85%RH(Non-condensing)
Dimension/
Wight		 122(H) x 58(46)(W) x 28(D)mm / approx. 130g (including batteries)

* These measuring units are only available in the TM-5010E model.

Accessories

Application

Maintenance in the factory and building

The hand-held tachometer can be used for monitoring the rotation speed of generators, conveyors, fans, motors and so on.

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki TM-5 Series Hand Tachometer first appeared on Kouei Japan Trading | Get Quotation.]]> Line Seiki TM-7010K Laser Type/ Digital Hand Tachometer Kit (Multi Function Type) https://koueitrading.com/global/product/line-seiki-tm-7010k-laser-type-digital-hand-tachometer-kit-multi-function-type/ Thu, 28 May 2020 06:32:27 +0000 https://koueitrading.com/global/?post_type=product&p=15393 Product Made in Japan Manufacturer: Line Seiki Model: TM-7010K Applications Maintenance in factory and building: The handheld tachometer can be used for monitoring rotation speed of generators, conveyors, fans, motors, and so on. Features With the adoption of laser technology non-contact measurement, the performance has improved: · Highly visible laser makes measurement adjustments easy. · […]

The post Line Seiki TM-7010K Laser Type/ Digital Hand Tachometer Kit (Multi Function Type) first appeared on Kouei Japan Trading | Get Quotation.]]> Product Made in Japan
Manufacturer: Line Seiki
Model: TM-7010K

Applications

Maintenance in factory and building: The handheld tachometer can be used for monitoring rotation speed of generators, conveyors, fans, motors, and so on.

Features

With the adoption of laser technology non-contact measurement, the performance has improved:
· Highly visible laser makes measurement adjustments easy.
· Measuring distance up to 1 m from a reflective target.
· 6.0 – 99999.9 rev/min measuring range and 0.1 rev/min Resolution
Multifunctional model:
· Prescale measurement
· 25 items and MIN/MAX memory
· Multi-unit selection
Contact measurement with Contact adaptor:
· Rotational Speed measurement and Linear / Surface Speed measurement

Description

Model
TM – 7010K TM-7010 main unit + Contact adaptor

Reflective tape, 10 pcs. Rubber tip, 3 pcs. Surface speed wheel (1/10 m) 1 pc. AAA alkaline battery, 4 pcs. Instruction manual + Carrying Case

Specification (Main Unit)

Model

 TM-7010
Measuring Range (Non-contact)

6.0 – 99999.9 r/min
0.10 – 1666.66 r/sec

Measuring Range

6.0 – 15000.0 r/min
0.10 – 250.00 r/sec
0.60 – 1500.00 m/min
1.00 – 2500.00 cm/sec
0.65 – 1640.41 y/min
0.10 – 1666.66 r/sec
0.39 – 984.25 in/sec
1.9 – 4921.25 f/min

Resolution

 0.1 r/min・f/min, others 0.01
Accuracy

±0.01% ± 1digit (r/min・m/min)
±0.05% ±1digit
(Other units including conversion accuracy)

Sampling Time

 1.0 – 10.0 seconds (1.0 – 2.0 seconds, with contact adaptor)
Display

Measurement Display : 6 digits, 7 segment LCD ( )
Low-battery:  mark Laser On: mark
On target:  mark Contact Measurement: mark

Display unit : /min, /sec, m/min cm/sec
Memory display : MEM1 – 25, MAX, MIN
Prescale Mode Indicator: PS
Prescale Range

0.001 – 999.999

Auto Power-off

 After 3 minutes from last measurement or key operation
Data Hold Time

Measurement data: until the next data is defined

Memory data: same as battery life
Measuring Method

Non-contact measurement: using the main unit (with reflective tape)
Contact type measurement: using contact adaptor (with rubber tip or surface speed wheel)

Optical System

 Light Source: Laser, Class 2
Operating Range: 50 – 1000 mm, ±40degrees
Wavelength: 650 nm, CW
Power Output: Max. 1mW
Power Supply

4pcs. of AAA alkaline battery

Battery Life with continuous measurement

 approx.15hours
Backlight

Blue (Auto-Backlight Off after10 seconds of inactivity)

Temperature

 Operating Temp. 5 – 40°C Storage Temp. -10 – +60°C (Non-Freezing)
Operating Humidity

35 – 85%RH (Non-Condensing)

Dimension / Weight (Battery Included)

125 (H) x 58 (W) x 27.4 (D) mm / 140g

Dimension (Main Unit)

1. Photoelectric part

2. Displays and indicators:

  • 2a. Measurement display
  • 2b. Prescale setting indicator
  • 2c. Unit display
  • 2d. Low-battery indicator
  • 2e. Contact measurement indicator
  • 2f. Memory number & MAX-MIN display
  • 2g. Laser On indicator
  • 2h. On target indicator

3. Measurement button

4. Key switches

  • 4a. Enter key
  • 4b. Memory Call key
  • 4c. Clear key
  • 4d. Linear/Surface Speed key (Unit Selection key)
  • 4e. Rotational Speed key (Unit Selection key)
  • 4f. Measurement mode key

Other items of Line Seiki

Request the quotation for Line Seiki

The post Line Seiki TM-7010K Laser Type/ Digital Hand Tachometer Kit (Multi Function Type) first appeared on Kouei Japan Trading | Get Quotation.]]>