Unique, Reliable and Cost-effective Tools to measure surface cleanliness.

Features

■ Can be evaluated objectively

■ Quick measurement (approximately 2 seconds)

■ Easy data management (data can be exported to a PC)

■ Two convenient measurement methods (ISO judgment and pass/fail judgment)

■ Versatility regardless of the shape of the object to be inspected (applicable to curved surfaces)

WA CLEAN technology allows you to reduce your blasting costs and ensure the best coating performance through:

• Objective and repeatable cleanliness controls
• Reduction of re-blasting via immediate identification of process deviation
• Reduction of over-blasting via an accurate monitoring of the cleanliness level

Available in 2 versions:

WA Clean Heavy Duty: Industrial intensive usage / contractor	WA Clean for iOS: pocket version ideal for inspectors and supervisors

You can choose the measurement method and the results are easy to see”

Supports two types of measurement result display, ISO judgment and pass/fail judgment
Realized quality inspection that does not require craftsmanship

High-productivity grit for desanding operations

High Performance Grit is a steel grit specially designed to improve shot blasting performance in foundries and forges. It works faster and last longer. Its capacity for removing and cleaning sands, resins or scale is unequalled.

Features

• ■Reduced blasting time ～Improve process capability
• ■ Improving the whiteness of products – For customers who pursue higher quality
• ■Reduction of blasting total cost ~Reduction of blade wear in the machining process (casting), etc.

HPG is a soft high-carbon steel grit characterized by:

• The specific, elliptic shape of its grains
• A consistent and narrow size distribution
• A long working life
• A homogeneous and stable operating mix

HPG Technical datasheet

Premium product for descaling operations in wheel-blasting

STAINIUM® is specially developed for descaling applications when little roughness is required at the end of the process. Specially available in fine grades, STAINIUM® provides a more stable operating mix.

Features

■ Due to the effect of polyhedral particles, it is more abrasive than steel shot, and
it is possible to speed up the line and reduce the amount of projection.

■ The glossiness of the product increases and the whiteness improves.

■ Roughness can be kept low

CHARACTERISTICS

• CONDITIONED STAINIUM® is a new type of conditioned grit free from any sharp edge, with narrow original size grading.
• MIXED STAINIUM® is a special mix of shot and soft grit which is stabilizing in the machine as optimum operating mix.

STAINIUM® Technical datasheet

A special blasting material developed exclusively for surface preparation before painting for shipbuilding, steel bridges, etc.

This is a recycled material made by wind crushing oxidized slag obtained as a by-product from electric furnace steelworks. Slag in a melted state at around 1,500°C is blown by a high-pressure blower, rapidly cooled with mist, and made into spheres by the action of surface tension. Ceramic aggregates (coarse and fine aggregates) with various characteristics not found in natural aggregates.

Features

■Type H is thermosetting formaldehyde resin media.

■It is recommended for use in the aviation industry due to its excellent abrasive power.

■ Substrate thickness of at least 0.040 inch (1 mm) is covered, residual stress is unaffected. In the semiconductor industry, it is used to remove burrs and resin extrusions on epoxy packages, especially when type XH (melamine) is too abrasive.
■Type H complies with the MIL standard specifications, MIL-P-85891, Type II.

■It is fully polymerized and does not contain free formaldehyde.

■Anti-static processing is done.

Specifications

Physicochemical properties

Features

■ Obtained by melting a mixture of bauxite, coal and scrap iron in an electric furnace.

■ It has excellent hardness and toughness.
Abrasive products made from brown alumina (A) with special adhesives and coatings are suitable for polishing carbon steel, malleable cast iron, hardened bronze, etc.

(1) It is also used for other refractory materials, chemical fillers, precision castings, non-slip materials, and the like.

Specifications

Features

(1) Obtained by pulverizing alumina refined by the Bayer method.

(2) Compared to brown fused alumina, it has slightly higher hardness and slightly lower toughness.

■ White Alumina (WA), with special adhesion and coating, is used to make abrasives for polishing very hard steels such as high carbon steels, alloy steels and high speed steels.

■ Applications other than abrasives include precision casting sand, spray coating materials, catalyst materials, high-temperature ceramics, and super refractories.

Dummy ball is conductive media (balls) especially developed as a dummy for electroplating process of chip parts.

Features

• Much lower cost compared with steel (bearing) balls
• Stable and high quality maintained by uniform spherical shape and strictly selected size

Specifications

• Better electric current density and higher current of efficiency
• Higher efficiency of adhesion of plating and good plating quality

Features

(1) Cylinder type (SCW-C)

(2) Round type (SCW-R)

Steel grit is a polygonal particle made of special steel with sharp edges, and is used for surface treatment of paint and blasting for rust removal.
“IKK Steel Grit” can be selected from the following three types according to the application .

Specifications

Steel shot is spherical particles made of special steel and used for shot blasting and shot peening. “IKK Steel Shot” is a high-performance blasting material that enables customers to perform the world’s best blasting work .

Specifications

High hardness and resilience realized .through our unique production method

Shot peening

• Improving fatigue strength (gear, spring, cam)
• Preventing stress corrosion cracking (welded part)
• Improving frictional property (bearing, piston, cam)

Blast cleaning

Deburring/descaling small parts

Advantages

• Best suited for fine particle peening or double shot peening for more fatigue strength
• 1.3 to 1.7 times as long in its performance life as the conventional ones, to lower abrasive cost by 30%.