Features

The material used is SUS316L and SUS316.
The connection part is a fully welded structure that guarantees a helium leak rate of less than 1.3×10^-10 Pa·m³/sec.
Production of electrolytic polishing specifications is also possible.
Lightweight and compact for easy handling.
The set pressure can be changed.

Specification

※Repeatability precision: The error in the action value with respect to the setting when operated repeatedly.
※Maximum operating pressure: The upper limit of the pressure at which the device can operate normally. If pressure above the maximum operating pressure is applied, it may cause malfunction, so please be careful.

Description

Appearance

Code color

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka

Features

• The low-pressure line filter (TLF series) uses a Teflon membrane element, which allows for the uniformity of aperture and captures small particles with high efficiency.
• The low-pressure line filter (TLF series) is standardly polished on the inside, enabling the supply of gas with higher purity.
• The high-pressure line filter (SHF series) is also capable of interior polishing.
• The high-pressure line filter (SHF series) can also be custom-made in large sizes.
• Including helium leak tests, a full inspection is conducted before shipment.
• Compact and lightweight, it allows for a reduction in piping space.

Specifications

TLF Series

Body: SUS316L
Element: Teflon membrane
Filter filtration level: 0.01μm
Standard maximum flow rate:
10L/min (nor) (at inlet pressure of 0.1MPa)
25L/min (nor) (at inlet pressure of 0.3MPa)
External leak rate: less than 1.3×10^-10 Pa·m³/sec
Maximum operating pressure: 0.97MPa

SHF Series

Body: SUS316
Element: SUS316
Filter filtration level: 2μm
Standard maximum flow rate:

20m³/h (nor) (at inlet pressure of 1MPa)
40m³/h (nor) (at inlet pressure of 2MPa)
External leak rate: less than 1.3×10^-10 Pa·m³/sec
Maximum operating pressure: 15MPa

Lineup

Low-Pressure Line Filter

High-Pressure Line Filter

Appearance

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka

Features

Ultra-high purity gas peripheral equipment that can support the megabit to gigabit era.
Manufactured in a clean environment under strict quality control.
All products undergo shipping inspection including He leak test.
It is also possible to manufacture products with electrolytic polishing specifications. (Ra0.25μm)
This is a highly reliable pressure gauge that is also used in S-TORR and TORR regulators.

Specifications

Materials Used

Contact Gas Parts
Bourdon tube: SUS316L
Stock: SUS316L / Ni-Cr-Mo alloy
Non-gas contact part
Case: SUS304
Others: SUS304, A1070P

Accuracy

Equivalent to JIS 1.6 grade (JIS B7505)
External overnight amount: 1.3×10-11Pa・m3/sec or less (9/16-18UNF specifications)
1.3×10-Pa・m2/sec or less (NPT1/4 specification)
Operating temperature: -5~40°C

Description

Appearance

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka

Features

The TORR series has earned high trust through a long track record and is synonymous with “semiconductor gas pressure regulators.”
Assembly is carried out in a class 1000 cleanroom with 0.3μm filtration.
A filter is built into the flow path of the primary chamber to reduce internal leaks.
All units are subjected to a helium leak test and shipment inspection.
It is possible to produce electrolytically polished models (Surface roughness of the gas contact metal part is Ra0.25μm).
The TORR-H series is capable of high-pressure control on the secondary side (up to 15MPa).

Specifications

Materials Used (TORR-H)

Gas Contact Parts:
Main body: SUS316L
Piston: SUS316
Filter: SUS316
Pressure gauge: SUS316L
Fittings: SUS316
Other gas contact parts: SUS316, fluororesin, fluororubber

Non-Gas Contact Parts:
Cap: C3604
Pressure adjustment handle: S45C

Performance

Maximum inlet pressure: 20MPa
Maximum outlet pressure: 15MPa
Maximum flow rate: 800L/min (normal conditions; when P1=13MPa, P2=12MPa, N2 GAS)
Operating temperature range: -5 to 40℃
Weight: 2.0kg
Built-in filter filtration level: 2μm
|Inlet/outlet port diameter: 1/4″
External leak rate: 1.3×10^-7 Pa·m³/sec or less

Flow Rate Characteristics Chart

Appearance

Description

Selection Caution

※1: Electrolytic polishing models cannot be chosen.
※ 2: If there is no primary side pressure gauge, the symbol for each use pressure is as follows.

※ 3: If there is no secondary side pressure gauge, the symbol for each use pressure is as follows.

※4: Only fitting type S (Swagelok) can be selected.
※5: Other shapes will use different symbols.
※ 6: If using italicized fittings, the structure will basically be welded connections. For other types of fittings, the structure will basically be threaded connections.
※7: Only fitting types S (Swagelok) and F (Fine Lock) can be selected.
※8: If the W (welded connection) is chosen for the ② structure, W2R, W2L, and BHE cannot be chosen.

⚠️Warning: In order to use the product correctly, please be sure to read the “Instruction Manual” carefully before use.

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka

Kouei is Distributor/Agent of Nissan Tanaka
Other items of Nissan Tanaka
Request the quotation for Nissan Tanaka

Thông số kĩ thuật

Thông Tin Kĩ Thuật

Thông Tin Kĩ Thuật Nissan Tanaka K Type

Thông Tin Kĩ Thuật

• Loại tay cầm đòn bẩy
• Loại có van

Lượng oxy có thể điều chỉnh. Ngoài ra, chúng tôi đã áp dụng một tay cầm dễ sử dụng với góc tăng 5 độ.
Lý tưởng để cắt nhiều loại tấm có độ dày từ 6 đến 100 mm

Thông Số Kĩ Thuật

Thông Tin Kĩ Thuật

Thông Tin Kĩ Thuật

Setsudan được sử dụng trong môi trường công nghiệp cho các công việc như tháo dỡ, chế tạo và tháo dỡ các cấu trúc kim loại.

Thông Tin Kĩ Thuật

Thông Tin Kĩ Thuật

Thông Số Kĩ Thuật

Thông Tin Kĩ Thuật

Thông Tin Kĩ Thuật

Thông Tin Kĩ Thuật

Specification

Thông Số Kĩ Thuật

Thông Số Kĩ Thuật

Tính Năng

Model sản phẩm ST-800/ST-1000 là máy in chữ và đường thẳng tốc độ cao cho các tấm phẳng có kích thước lớn. Có thể dùng để đánh dấu trong công nghiệp đống tàu và xây dựng cầu đường sử dụng các vật liệu ở tốc độ cao để in các hướng dẫn công việc và thông số vật liệu.

Thông Số Kĩ Thuật

Thông số kĩ thuật của KT Series

Máy cắt theo đường bất kì và đường tròn

Máy cắt tiện dụng loại tự động

Nhà sản xuất: NISSAN TANAKA CORPORATION

Nhà sản xuất: NISSAN TANAKA CORPORATION

Model: 03

Nhà sản xuất: NISSAN TANAKA CORPORATION

Nhà sản xuất: NISSAN TANAKA CORPORATION

Nhà sản xuất: NISSAN TANAKA

Máy cắt theo đường thẳng

Thiết bị dẫn cắt

Máy cắt cạnh

Nhà sản xuất: NISSAN TANAKA CORPORATION

Model: Scarfing 1000E