Kansai Electric Heat Corp | Kouei Japan Trading | Get Quotation

Kansai Electric Heat Corp B-Type Series T.S.K Hot-air Generator

kvt part2 — Wed, 25 Feb 2026 09:17:51 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: B-Type Series

Features

Continuous use max. hot-air temp. 300ﾟC (350ﾟC when the auto-temp controller TRT is used.)
Heatproof blower for the hot-air can be circulated is equipped to the all type. (Energy saving !)
(Hot-air circulation temp. TSK-17B : 140ﾟC, TSK-22B – 132B : 230ﾟC)
Each sensor for the safety circuit is built. (Electronic safety circuit is adopted.)
(High reliability thermocouple is adopted to the each safety circuit.)
Each blowerless type (only heater) is prepared.
Safety circuit power supply lamp with the buzzer is equipped.

Specification

Model	Type	Power	Heater capacity	Continuous use max. temp.	Motor capacity	Max. air volume (m3/min) 50/60Hz	Max. static pressure (kPa) 50/60Hz	Category
TSK-17B	3200-3-008Y	3-phase 200V 50/60Hz	3kW	300ﾟC	80W	2.6/3.1	0.67/0.95	Standard
	3200-5-008Y		5kW
TSK-22B	3380~440-3-013YA-LB	3-phase 380V, 400V, 415V, 440V 50/60Hz	3kW		130W	4.6/4.6	0.85/1.20	Standard
	3380~440-5-013YA-LB		5kW
TSK-32B	3380~440-7.5-013YA-LB		7.5kW
TSK-42B	3380~440-8-025Y-LB		8kW		250W	7.2/7.5	1.10/1.52	Standard
TSK-52B	3380~440-10-025Y-LB		10kW
	3380~440-15-025Y-LB		15kW
TSK-62B	3380~440-15-075Y-LB	3-phase 380V, 400V, 415V 50/60Hz, 440V 60Hz	15kW		750W	15.7/11.6	1.75/2.40	Standard
TSK-72B	3380~440-20-075Y-LB		20kW
TSK-82B	3380~440-30-1.5Y-LB		30kW		1.5kW	24.1/23.3	2.00/2.83	Standard
TSK-92B	3380~440-35-2.2Y-LB		35kW		2.2kW	34.8/29.1	2.8/3.9	Standard
TSK-102B	3380~440-45-2.2Y-LB		45kW
TSK-122B	3380~440-60-3.7Y-LB		60kW		3.7kW	49/37	3.5/5.1	Order
TSK-132B	3380~440-80-5.5Y-LB		80kW		5.5kW	60/45	4.1/6.0	Order

Model	Type	Power	Heater capacity	Continuous use max. temp.	Motor capacity	Max. air volume (m3/min) 50/60Hz	Max. static pressure (kPa) 50/60Hz	Category
TSK-42BS	3380~440-8-075SY-LB	3-phase 380V, 400V, 415V 50/60Hz, 440V 60Hz	8kW	300ﾟC	750W	11.5/11.6	1.75/2.40	Standard
TSK-52BS	3380~440-10-075SY-LB		10kW
TSK-52BS	3380~440-15-075SY-LB		15kW
TSK-62BS	3380~440-15-1.5SY-LB		15kW		1.5kW	20.9/23.2	1.95/2.72	Standard
TSK-72BS	3380~440-20-1.5SY-LB		20kW		1.5kW	20.9/23.2	1.95/2.72	Standard
TSK-82BS	3380~440-30-2.2SY-LB		30kW		2.2kW	30.6/29.0	2.7/／3.80	Standard

Model	Type	Power	Heater capacity	Continuous use max. temp.	Matching air volume (m3/min)	Pressure loss (at matching air volume)	Resisting pressure	Category
TSK-22BF	3380~440-3	3-phase 230V, 380V, 400V, 415V, 440V 50/60Hz	3kW	300ﾟC	6	1.0kPa	19.6kPa	Standard
	3380~440-5		5kW
TSK-32BF	3380~440-7.5		7.5kW
TSK-42BF	3380~440-8		8kW		10	0.6kPa		Standard
TSK-52BF	3380~440-10		10kW
	3380~440-15		15kW
TSK-62BF	3380~440-15		15kW		20	1.5kPa	9.8kPa	Standard
TSK-72BF	3380~440-20		20kW
TSK-82BF	3380~440-30		30kW		30	1.0kPa		Standard
TSK-92BF	3380~440-35		35kW		40	0.85kPa		Standard
TSK-102BF	3380~440-45		45kW

The post Kansai Electric Heat Corp B-Type Series T.S.K Hot-air Generator first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp HEPA-Filter Unit Resisting Pressure

kvt part2 — Sun, 29 Nov 2020 05:06:21 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: HEPA

Specification

Model	Processing	Connection
	air volume	bore
FU-110U	4m3/min	65A
		Female type
		ferrule
FU-200U	8m3/min	100A
		Female type
		ferrule

The post Kansai Electric Heat Corp HEPA-Filter Unit Resisting Pressure first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp HEPA-filter Box With The Heat Insulator

kvt part2 — Sun, 29 Nov 2020 05:02:55 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model:HEPA-filter

Specification

Model	Processing	Connection
Model	air volume	bore
3FU-4	4m3/min	φ75mm
3FU-8	8m3/min	φ75mm
3FU-13.5	13.5m3/min	φ100mm
3FU-17	17m3/min	φ125mm
3FU-31	31m3/min	φ150mm

The post Kansai Electric Heat Corp HEPA-filter Box With The Heat Insulator first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp TVC-filter

kvt part2 — Sun, 29 Nov 2020 04:59:05 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: TVC-filter

Specification

Model	Processing	Connection
Model	air volume	bore
TVC1-K	2m3/min	φ50～75mm
TVC2-K	5m3/min	φ50～75mm
TVC3-K	8m3/min	φ50～100mm
TVC4-K	13m3/min	φ50～150mm

The post Kansai Electric Heat Corp TVC-filter first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp CR-Filter Horizontal Type And Vertical Type

kvt part2 — Sun, 29 Nov 2020 04:58:14 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: CR-filter

Specification

Model	Processing	Connection
Model	air volume	bore
CR-12AS	2m3/min	φ65mm
CR-17AS	3.5m3/min	φ75mm
CR-22AS	6m3/min	φ75mm
CR-41AS	8m3/min	φ100mm
CR-55AS	15m3/min	φ125mm
CR-61AS	20m3/min	φ125mm
CR-81AS	30m3/min	φ150mm
CR-91AS	40m3/min	φ200mm
CR-130AS	60m3/min	φ250mm

Model	Processing	Connection
Model	air volume	bore
CR-22AV	6m3/min	φ75mm
CR-41AV	8m3/min	φ100mm
CR-55AV	15m3/min	φ125mm
CR-61AV	20m3/min	φ125mm
CR-81AV	30m3/min	φ150mm
CR-91AV	40m3/min	φ200mm
CR-130AV	60m3/min	φ250mm

The post Kansai Electric Heat Corp CR-Filter Horizontal Type And Vertical Type first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp DF Demister filter and Throwaway filter

kvt part2 — Sun, 29 Nov 2020 04:50:30 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: DF

Specification

Model	Processing air volume	Connection bore	Throwaway
Model	Processing air volume	Connection bore	filter
DF-S12S	2m3/min	φ65mm	F-12P
DF-S17S	3.5m3/min	φ75mm	F-17P
DF-S22S	6m3/min	φ75mm	F-22P
DF-S41S	8m3/min	φ100mm	F-41P
DF-S55S	15m3/min	φ125mm	F-55P
DF-S81S	30m3/min	φ150mm	F-81P
DF-S91S	40m3/min	φ200mm	－
DF-S130S	60m3/min	φ250mm	－

The post Kansai Electric Heat Corp DF Demister filter and Throwaway filter first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp FW-Filter For The One-Way

kvt part2 — Sun, 29 Nov 2020 04:45:36 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: FW-Filter

Specification

This is the filter for rough dusts of the throwaway type. This is easily attached to the inlet of the hot-air generator and the inlet of fresh air.

Model	Processing	Connection
Model	air volume	bore
FW 75	6m3/min	φ75mm
FW100	8m3/min	φ100mm
FW125	15m3/min	φ125mm
FW150	30m3/min	φ150mm

The post Kansai Electric Heat Corp FW-Filter For The One-Way first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp T.S.K Mixing fan

kvt part2 — Sun, 29 Nov 2020 04:36:01 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: T.S.K

Features

Moisture removal rate is 47% in the case that mixing fan is not used to the drying oven.

Up to 87% by installing the TSK mixing fan (Our ratio).

Temp. distribution inside the oven is plus minus 7ﾟC in the case that mixing fan is not used to the drying oven.

To plus minus 1ﾟC by installing the TSK mixing fan (Our ratio).

Specification

T.S.K Mixing fan Supecification

Model	YK50	YK100	YK250	YK400
Power	3-phase 200V / 200V, 220V 50/60Hz
Rated current	0.32/0.29A 50/60Hz	0.68/0.63A 50/60Hz	1.27/1.17A 50/60Hz	1.95/1.71A 50/60Hz
Output	50W	130W	250W	400W
Effective area inside the oven	0.8/1.0m³ 50/60Hz	1.2/1.5m³ 50/60Hz	1.6/2.0m³ 50/60Hz	4.0m³ 50/60Hz
Effective height inside the oven	0.8/1.0m 50/60Hz	1.2/1.5m 50/60Hz	1.6/2.0m 50/60Hz	2.5m 50/60Hz
Continuation use temp. inside the oven	210ﾟC
Mixing air volume　50/60Hz	1.9/2.2m³/min	3.8/4.4m³/min	6.2/7.3.m³/min	15m³/min
Discharge air-speed　50/60Hz	21/24m/s	33/38m/s	33/39m/s	26.5m/s

The post Kansai Electric Heat Corp T.S.K Mixing fan first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp HEX-HJ Platinum Catalytic Oxidation-Type Deodorization Device

kvt part2 — Sun, 29 Nov 2020 04:32:26 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: HEX-HJ

Specification

Model	HEX-HJ
Specification	Many pipes type heat exchanger
Max. use temp.	500C
Max. use air volume	1.5Nm3/min
Heat radiation side pressure loss	0.07kPa at max. air volume
Heat receiving side pressure loss	0.13kPa at max. air volume
Heat radiation resisting pressure	Less than 2.96kPa
Heat receiving resisting pressure	Less than 2.96kPA
Bore of Outlet and Inlet	φ75

The post Kansai Electric Heat Corp HEX-HJ Platinum Catalytic Oxidation-Type Deodorization Device first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp HJ-15 Platinum Catalytic Oxidation-Type Deodorization Device

kvt part2 — Sun, 29 Nov 2020 04:23:19 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: HJ-15

Features

The HJ-15 deodorization device has a semi-permanent lifespan thanks to its platinum honeycomb catalyst (catalyst life > 5 years). It offers high safety and cost-efficiency with its compact size (less than 1/10th of direct combustion) and lower processing temperature (about 300°C).

The heater circuit automatically turns off if the oxidation reaction temperature exceeds 500°C, triggering a warning buzzer and a normally closed contact output from the built-in service terminal if it surpasses 550°C.

Specification

Platinum catalytic oxidation-type deodorization device
Model	HJ-15
Type	3200-8.5C-013YA-LB-HJ	3200-8.5C-025Y-LB-HJ
Power	3-phase 380V, 400V, 415V 440V 50/60Hz
Heater capacity	8.5kW
Processing temp.	300ﾟC – 350ﾟC (Recommendation temp.)
Bore of Outlet ･ Inlet	φ75mm pipe	φ75mm pipe ･ φ100mm pipe
Processing air volume	1.5Nm3/min (SV45000hr-1)
Max. static pressure	1.2kPa	1.52kPa
Suction air temp. of the blower	0ﾟC – less than +230ﾟC
Blower type ･ Motor capacity	YU-130M ･ 130W	YU-250M ･ 200W
Inlet demister filter	DF-22S	DF-41S

The post Kansai Electric Heat Corp HJ-15 Platinum Catalytic Oxidation-Type Deodorization Device first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp SUS High-Blow Nozzle

kvt part2 — Sun, 29 Nov 2020 04:13:28 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SUS

Specification

Model	50SUS	65SUS	75SUS	100SUS	125SUS
Bore of the inlet	φ50	φ65	φ75	φ100	φ125
Adjustment range of slit width	0.5 – 1.5mm	1.0 – 2.0mm	1.0 – 2.mm	1.0 – 3.0mm	1.0 – 4.0mm
Adjustment range of slit width	0.5 – 1.5mm	1.0 – 2.0mm	1.0 – 2.mm	1.0 – 3.0mm	1.0 – 4.0mm
Manufacturable	･200mm – 1000mm	･300mm – 1900mm	･300mm – 1900mm	500mm – 2400mm	500mm – 2400mm
slit length	at slit width 0.5 – 1.0mm	at slit width 0.5 – 1.0mm	at slit width 0.5 – 1.0mm
		･300mm – 1000mm	･300mm – 1500mm
		at slit width 1.1 – 2.0mm	at slit width 1.1 – 2.0mm
Efficient use air-speed	･25m/s – 120m/s	･25m/s – 120m/s	･50m/s – 150m/s	･50m/s – 150m/s	･25m/s – 150m/s
	at slit width 1.0mm	at slit width 1.0mm	at slit width 1.0mm	at slit width 1.0mm	at slit width 1.0mm
	･25m/s – 100m/s	･25m/s – 100m/s	･25m/s – 80m/s	･25m/s – 80m/s	･25m/s – 100m/s
	at slit width 1.5mm	at slit width 2.0mm	at slit width 2.0mm	at slit width 2.0mm	at slit width 2.0mm
				･25m/s – 50m/s	･50m/s – 100m/s
				at slit width 3.0mm	at slit width 3.0mm
					･50m/s – 75m/s
					at slit width 4.0mm
Heatproof temp.	Less than 350C
Resisting pressure	Less than 49kPa
Accuracy rating	Disorder of the air-speed of the right and left is less than plus minus 5%

The post Kansai Electric Heat Corp SUS High-Blow Nozzle first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp TSK-PN nozzle

kvt part2 — Sun, 29 Nov 2020 03:37:26 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: TSK-PN

Specification

Common Specification
Resisting Pressure	49kPa
Max. Use Temp.	200°C
Material	Aluminum4
Accuracy Rating	Disorder of the air-speed of the right and left is less than ±3.5%
Fixed Metal Fittings	Equipped by default to all types

Option: You can install each piping part with the mentioned flange from the option catalog by placing the flange at the inlet

Model	Bore of the inlet	Slit width	Max. use discharge air-speed	Manufacturable length
50PN	φ50	1.0mm	120m/s	100mm – 1000mm
		1.5mm	90m/s	100mm – 1000mm
		2.0mm	60m/s	100mm – 1000mm
65PN	φ65	1.0mm	100m/s	300mm – 1500mm
		1.5mm	75m/s	300mm – 1500mm
		2.0mm	50m/s	300mm – 1500mm
75PN	φ75	1.0mm	120m/s	500mm – 1500mm
		1.5mm	90m/s	500mm – 1500mm
		2.0mm	60m/s	500mm – 1500mm

The post Kansai Electric Heat Corp TSK-PN nozzle first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Pen-nozzle General type

kvt part2 — Sun, 29 Nov 2020 03:19:29 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Pen-nozzle

Features

Feature	Description
Air-Speed	The discharge slit achieves a strong airspeed of 200 to 400 m/s within a 100mm distance using minimal compressed air
Material and Efficiency	Constructed solely from stainless steel, it guarantees high efficiency and suppresses resonance sound from the pen-nozzle.
Functionality	Can be used as an air amplifier, with compression air supplied from the compressor.
Heatproof Temperature	Heatproof up to 350°C.

Specification

Model	PEN50	PEN75	PEN100	PEN125	PEN150	PEN200	PEN250	PEN300
Slit width	0.2mm
Form of inlet	R 1/4 (8A) Screw for pipes					R3/8 (10A) Screw for pipes
Slit length	50mm	75mm	100mm	125mm	150mm	200mm	250mm	300mm
Oblique slit
Model	PEN50B	PEN75B	PEN100B	PEN125B	PEN150B	PEN200B	PEN250B	PEN300B
Slit width	0.2mm
Form of inlet	R 1/4 (8A) Screw for pipes					R3/8 (10A) Screw for pipes
Slit length	50mm	75mm	100mm	125mm	150mm	200mm	250mm	300mm

The post Kansai Electric Heat Corp Pen-nozzle General type first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Blow-nozzle General type

kvt part2 — Sun, 29 Nov 2020 03:13:06 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Blow-nozzle

Specification

[ Common specification ]	[ Structure ]
･ Resisting pressure : 49kPa ･ Max. use temp. : 350ﾟC ･ Material : SUS304 ･ Accuracy rating : Disorder of the air- speed of the right and left is less than plus minus 3.5% ･ Fixed metal fittings is equipped by default to all type

Model	Bore of the inlet	Slit width	Max. use discharge air-speed	Manufacturable length
25DS	φ25	1.0mm	100m/s	100mm – 300mm
		1.0mm	65m/s	100mm – 400mm
		1.5mm	65m/s	100mm – 300mm
		1.5mm	45m/s	100mm – 400mm
38DS	φ38	1.0mm	100m/s	300mm – 600mm
		1.0mm	65m/s	300mm – 1000mm
		1.5mm	65m/s	300mm – 600mm
		1.5mm	45m/s	300mm – 1000mm
50DS	φ50	1.0mm	100m/s	600mm – 1000mm
		1.0mm	65m/s	600mm – 1500mm
		1.5mm	65m/s	600mm – 1000mm
		1.5mm	45m/s	600mm – 1500mm
		2.0mm	50m/s	600mm – 1000mm
		2.0mm	35m/s	600mm – 1500mm

The post Kansai Electric Heat Corp Blow-nozzle General type first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp High-Blow Nozzle

kvt part2 — Sun, 29 Nov 2020 02:09:53 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: High-Blow

Features

Air knife coater,Even surface treatment
Defroster, Air-curtain,
Rinse washing

Specification

Matching fluid : Air, Steam, Water (Order)

The system’s accuracy rating is particularly impressive, as it maintains a minimal air-speed discrepancy between the right and left sides, with a variance of less than ±3%.

In terms of heat resistance, the design is optimized to effectively withstand temperatures up to, but not exceeding, 230°C.

The system has a resisting pressure of 2 kgf/cm².

The slit features hard alumite treatment according to JIS6030 standards on aluminum.

Silicon heatproof packing is used for the chamber’s material.

Model	Bore of the inlet	Adjustment range of slit width	Basis air volume par 1-inlet	Max. area of the slit par 1-inlet	Manufacturable length
15AL	R1/2	0.5mm – 2.0mm	0.8m3/min	205mm2	100mm – 600mm
25AL	R1	0.5mm – 2.0mm	2.3m3/min	510mm2	200mm – 1000mm
40AL	R11/2	1.0mm – 3.0mm	4.8m3/min	1230mm2	200mm – 1500mm
50AL	R2	1.0mm – 5.0mm	7.6m3/min	1950mm2	300mm – 2000mm

Variation of the air inlet
Model	Quantity of the air inlet	Type	Reference photograph
15AL 25AL 40AL 50AL	Side 1 inlet	S1
	Side 2 inlets	S2
	Upper 1 inlet	U1
	Upper 2 inlets	U2
25AL 40AL 50AL	Upper 3 inlets	U3
40AL 50AL	Upper 4 inlets	U4
15AL 25AL 40AL 50AL	Front 1 inlet	F1
15AL 25AL 40AL 50AL	Front 2 inlets	F2
25AL 40AL 50AL	Front 3 inlets	F3
40AL 50AL	Front 4 inlets	F4

The post Kansai Electric Heat Corp High-Blow Nozzle first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp SHW Series Air Heater

kvt part2 — Sun, 29 Nov 2020 01:53:06 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SHW Series

Specification

Model	Heater Capacity (kW)	Max. Use Hot-Air Temp. (°C)	Resisting Pressure (MPa)
SHW-130	130	1000	0.49
SHW-600	600	1000	0.97
SHW-730	730	727	4.89
SHW-850	850	850	0.97

The post Kansai Electric Heat Corp SHW Series Air Heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Pen Heater Multiple Type

kvt part2 — Sun, 29 Nov 2020 01:39:31 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Pen Heater

Specification

Max. Use Hot-Air Temp. (°C)	Connection Type	Pen Heater	Auto-Temp. Controller
750	Five Connection Type	PH22(1200-08K) * 5pcs	TRC202 * 5pcs

The post Kansai Electric Heat Corp Pen Heater Multiple Type first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Super Heater Multiple Type

kvt part2 — Sun, 29 Nov 2020 01:12:08 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Super Heater

Specification

Max. Use Hot-Air Temp. (°C)	Connection Type	Super Heater	Auto-Temp. Controller
500	Five Connection Type	SH71(3200-20K-40A) * 5pcs	TCU20K * 5pcs
500	Two Connection Type	SH71(3200-20K-40A) * 2pcs	TCU20K * 2pcs

The post Kansai Electric Heat Corp Super Heater Multiple Type first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp XS-3B-3MPa Hot-Air

kvt part2 — Sat, 28 Nov 2020 09:00:10 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: XS-3B-3MPa

Specification

Specification	Value
Heater Capacity	3-phase 200V 5kW
Max. Use Hot-Air Temp.	350°C
Resisting Pressure	3MPa
Max. Usable Air Volume	0.5 Nm³/min
Characteristic	With the sensor for managing the outlet temp. With the overheat prevention sensor

The post Kansai Electric Heat Corp XS-3B-3MPa Hot-Air first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp 2BLH3-0.88MPA Hot-Air

kvt part2 — Sat, 28 Nov 2020 08:51:36 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: 2BLH3-0.88MPA

Specification

Specification	Value
Heater Capacity	3-phase 440V 30kW
Max. Use Hot-Air Temp.	80°C
Resisting Pressure	0.88MPa
Max. Usable Air Volume	12 Nm³/min
Characteristics	With Auto-temp. controller TCU-20K

The post Kansai Electric Heat Corp 2BLH3-0.88MPA Hot-Air first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp SHW-480 Hot-Air

kvt part2 — Sat, 28 Nov 2020 08:42:33 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SHW-480

Specification

Specification	Value
Heater Capacity	3-phase 400V 480kW
Max. Use Hot-Air Temp.	850°C
Resisting Pressure	0.49MPa
Max. Usable Air Volume	20 Nm³/min
Characteristic	Change function of the heater output
	Hot-start function (Preheat operation)

The post Kansai Electric Heat Corp SHW-480 Hot-Air first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp 6BL4-110-0.4MPa Hot-Air

kvt part2 — Sat, 28 Nov 2020 08:36:58 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: 6BL4-110-0.4MPa

Specification

Specification	Value
Heater Capacity	3-phase 200V 110kW
Max. Use Hot-Air Temp.	400°C (Suction temp. 220°C)
Resisting Pressure	0.35MPa
Max. Usable Air Volume	10 – 50 Nm³/min

The post Kansai Electric Heat Corp 6BL4-110-0.4MPa Hot-Air first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp SHW-2000 Hot-Air

kvt part2 — Sat, 28 Nov 2020 08:28:21 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SHW-2000

Features

This was delivered to JAXA as the air heater for the combustion testing of the fan-shaped partial model of the annular burner inside the research and development project for the environmental alliance type small size airplane.

Specification

Specification	Value
Heater Capacity	3-phase 420V 2000kW
Max. Use Hot-Air Temp.	1000K (727°C)
Resisting Pressure	5MPa
Max. Usable Air Volume	186 Nm³/min

The post Kansai Electric Heat Corp SHW-2000 Hot-Air first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp X-MS Series Electric Hot-Air Mold Dryer

kvt part2 — Sat, 28 Nov 2020 07:39:42 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: X-MS Series

Specification

The function now includes an energy conservation auto-drying feature for all types.

Consequently, the timer efficiently regulates both the continuous blow and hot-air operations until the completion of the mold drying process.

Model	X-3MS	X-4MS	X-5MS
Power 50/60Hz	3-phase 380V, 400V, 415V, 440V
Heater capacity	30kW	45kW	60kW
Max. air volume	20.3m3/min	26.0m3/min	33m3/min
Max. static pressure	4.25kPa	5.10kPa	8.90kPa
Auto-temp. control range	Normal – +350ﾟC　High efficiency digital temp. controller
Air volume control method	Inverter, Variable type of 50% – 100% by the volume
Standard equipment	Inlet filter, 90ﾟ downward elbow, Flange for the hose		Multi-branch head 90ﾟ elbow φ100 TS-hose 4-pcs. Flange side the mold 4-pcs. High-torque band 8-pcs.

The post Kansai Electric Heat Corp X-MS Series Electric Hot-Air Mold Dryer first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Unit Heater, Duct Heater

kvt part2 — Sat, 28 Nov 2020 07:20:37 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Unit Heater, Duct Heater

Features

Equipped with a large air volume pressure ventilation fan

Built-in overheat protector

With wind direction guide

Specification

Specifications

Model	Power supply	Heater Vol	Heater line	Adaptive air volume at pressure loss of 0.3 kPa
ＤＨ－１Ｌ	3PHASE ２００Ｖ	５ｋＷ	1	７m3／min
ＤＨ－２		５ｋＷ	1	１７m3／min
ＤＨ－２Ｌ		１０ｋＷ	1	１４m3／min
ＤＨ－４		１０ｋＷ	1	３４m3／min
ＤＨ－４Ｌ		１５ｋＷ	1	２８m3／min
ＤＨ－８		２０ｋＷ	２（１０ｋＷ×２）	６８m3／min
ＤＨ－１２		３０ｋＷ	２（１５ｋＷ×２）	１０２m3／min
ＤＨ－１８		４５ｋＷ	３（１５ｋＷ×３）	１５３m3／min
ＤＨ－２４		４５ｋＷ	３（１５ｋＷ×３）	２０４m3／min

Model	Power supply	Heater Vol	Blower output	Blower Air vol.	Outlet tempΔＴ
UHPF-25-TC	3 phase ２００Ｖ　50/60Hz	５kW	２５Ｗ	１９/２２m3/min	16/1４℃
UHPF-40-TC		１０kW	２００Ｗ	５５/５９m3/min	8.5/8.1℃
ＵＨＰＦ－２５		５kW	２５Ｗ	１９/２２m3/min	16/1４℃
ＵＨＰＦ－４０		１０kW	２００Ｗ	５５/５９m3/min	8.5/8.1℃

model	POWER	Heater Vol.	Heater Line	Adapted air volume at pressure loss of 0.3 kPa	Pressure resistance
model	SUPPLY	Heater Vol.	Heater Line	Adapted air volume at pressure loss of 0.3 kPa	Pressure resistance
ＤＨ－１ＬＨ	3 PHASE	５ｋＷ	1	７m3／min	２４．５ｋＰａ ※Other specifications conform to the duct heater standard type.
ＤＨ－２Ｈ		５ｋＷ	1	１７m3／min
ＤＨ－２ＬＨ		１０ｋＷ	1	１４m3／min
ＤＨ－４Ｈ	２００Ｖ	１０ｋＷ	1	３４m3／min
ＤＨ－４ＬＨ		１５ｋＷ	1	２８m3／min
ＤＨ－８Ｈ		２０ｋＷ	２（１０ｋＷ×２）	６８m3／min
ＤＨ－１２Ｈ		３０ｋＷ	２（１５ｋＷ×２）	１０２m3／min
ＤＨ－１８Ｈ		４５ｋＷ	３（１５ｋＷ×３）	１５３m3／min
ＤＨ－２４Ｈ		４５ｋＷ	３（１５ｋＷ×３）	２０４m3／min

The post Kansai Electric Heat Corp Unit Heater, Duct Heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp SL-Series Electric heater

kvt part2 — Sat, 28 Nov 2020 07:06:15 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: SL-Series

Specification
Model	Sl-3T	SL-4T	SL-6T
Power	3-phase 220･230･380V	3-phase 220･230･240･380･400･415･440･460･480V
Heater capacity	4KW	5kW	6kW
Max. hot-air temp.	500ﾟC
Suction air-temp.	Less than 70ﾟC
Resisting pressure	490kPa
Max. Usable air volume	2.5m³/min
Pressure loss (at 2m³/min)	2.8kPA	3.3kPa	3.8kPa
Matching Auto-temp. controller	TR32A

The post Kansai Electric Heat Corp SL-Series Electric heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp XS-Series Electric heater

kvt part2 — Sat, 28 Nov 2020 06:56:13 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: XS-Series

Model	XS-2A	XS-2B	XS-2C
Power	Single-phase 200V	Single-phase 200･230V	Single-phase 220･230･240V
Heater capacity	1.5KW	2.4kW	3.8kW
Max. hot-air temp.	250ﾟC	300ﾟC
(When using TRC202.)	(300ﾟC)	(350ﾟC)
Suction air-temp.	Less than 140ﾟC
Resisting pressure	58.8kPa
Max. Usable air volume	3m3/min
Pressure loss (at 2m3/min)	0.2kPA	0.3kPa	0.5kPa
Matching Auto-temp. controller	TRC202-2A	TRC202-2B	TRC202-2C

Model	XS-3A	XS-3B	XS-3C
Power	3-phase 220･230･240V	3-phase 220･230･240･380･400･415･440･460･480V
Heater capacity	3KW	5kW	10kW
Max. hot-air temp.	350ﾟC
(When using TR32A,52A.)	(450ﾟC)
Suction air-temp.	200ﾟC
(When using TR32A,52A.)	(300ﾟC)
Resisting pressure	58.8kPa
Max. Usable air volume	6m3/min
Pressure loss (at 2m3/min)	0.4kPA	0.5kPa	0.6kPa
Matching Auto-temp. controller	TR32A	TR52A

Model	XS-4A	XS-4B	XS-4C
Power	3-phase 220･230･240･380V	3-phase 220･230･240･380･400･415･440･460(Only XS-4B)･480V
Heater capacity	4KW	8kW	12kW
Max. hot-air temp.	350ﾟC
(When using TRC501.)	(450ﾟC)
Suction air-temp.	200ﾟC
(When using TRC501.)	(230ﾟC)
Resisting pressure	39.2kPa
Max. Usable air volume	6m3/min
Pressure loss (at 2m3/min)	0.4kPA	0.5kPa	0.55kPa
Matching Auto-temp. controller	TRC501-XS4

The post Kansai Electric Heat Corp XS-Series Electric heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Block Heater

kvt part2 — Sat, 28 Nov 2020 06:47:04 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Block Heater

Specification	Continuation usable max. hot-air temp.	Material of main touching gas dept.	Resisting pressure	Overheat prevention sensor
S-type	350ﾟC	Ulster steel	About 4.9kPa	Thermostat
W-type	500ﾟC	SUS304	About 4.9kPa	K-type thermocouple

Specification

S-type	W-type	Power	Heater capacity	Matching gas capacity at pressure loss 0.98kPa	Controller type
–	4BW2	Please designate.	30kW	50m³/min	TRT101AK
–	4BW3		45kW	43m³/min	TC4B3
4BS4	4BW4		60kW	39m³/min	TC4B4
4BS5	4BW5		75kW	36m³/min	TC4B5
4BS6	4BW6		90kW	33m³/min	TC4B6
8BS2	8BW2		40kW	100m³/min	TC8B2
8BS3	8BW3		60kW	86m³/min	TC8B3
8BS4	8BW4		80kW	78m³/min	TC8B4
8BS5	8BW5		100kW	72m³/min	TC8B5
8BS6	8BW6		120kW	66m³/min	TC8B6
12BS3	12BW3		90kW	137m³/min	TC12B3
12BS4	12BW4		120kW	123m³/min	TC12B4
12BS5	12BW5		150kW	112m³/min	TC12B5
12BS6	12BW6		180kW	104m³/min	TC12B6
24BS3	24BW3		135kW	274m³/min	TC24B3
24BS4	24BW4		180kW	246m³/min	TC24B4
24BS5	24BW5		225kW	224m³/min	TC24B5
24BS6	24BW6		270kW	208m³/min	TC24B6
24BS7	24BW7		315kW	194m³/min	TC24B7
24BS8	24BW8		360kW	183m³/min	TC24B8
24BS9	24BW9		405kW	174m³/min	TC24B9

The post Kansai Electric Heat Corp Block Heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Super Heater

kvt part2 — Sat, 28 Nov 2020 06:45:04 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Super Heater

Super heater specification

Model	SH41		SH51		SH61		SH71
Type	32200~440	32200~440	32200~440	32200~440	32200~440	32200~440	32200~440	32200~440
	-3K-*	-4K-*	-6K-*	-8K-*	-10K-*	-12K-*	-15K-40A	-20K-40A
Power	3-phase 220V･380V・400V・440V 50/60Hz
Heater capacity	3kW	4kW	6kW	8kW	10kW	12kW	15kW	20kW
Max. hot-air temp.	700ﾟC		800ﾟC		800ﾟC		700ﾟC
Max. usable air volume	2.5m3/min		2.2m3/min		2.0m3/min		4.0m3/min
Min. usable air volume	0.20Nm3/min	0.27Nm3/min	0.32Nm3/min	0.42Nm3/min	0.55Nm3/min	0.65Nm3/min	1.00Nm3/min	1.37Nm3/min
Resisting pressure	Inlet attachment 40A : 490kPA, FD38･FD50 : 30kPa						490kPa
Weight	4.7kg		5.4kg		6.8kg		16kg

This is the max. hot-air temp. when the control unit TCU-series is used.
Max. hot-air temp. of the all type is 500ﾟC when the control unit TCU-series is not used.

*Model*	*FH30*	*FH40*	*FH50*	*FH60*
Type	3380~440-30	3380~440-40	3380~440-50	3380~440-60
Power	3-phase 380V･400V / 400V･440V 50/60Hz
Matching Super heater	SH41 – SH71
Outlet bore	40A Socket Rp1¹/₂			50A Socket Rp 2
Motor max. output	0.28/0.42kW 50/60Hz	0.55/0.85kW 50/60Hz	1.3/1.9kW 50/60Hz	2.3kW/3.4kW 50/60Hz
Max. air volume	1.3/1.3m³/min 50/60Hz	2.0/2.5m³/min 50/60Hz	2.9/3.5m³/min 50/60Hz	4.0/4.9m³/min 50/60Hz
Max. static pressure	9.3/12.4kPa 50/60Hz	10.4/14.0kPa 50/60Hz	14.6/17.4kPa 50/60Hz	19.8/24.5kPa 50/60Hz
Blower model	VFZ301A-4Z	VFZ401A-4Z	VFZ501A-4Z	VFZ601A-4Z
Noise	50/60dB 50/60Hz	64/67dB 50/60Hz	69/72dB 50/60Hz	68/72dB 50/60Hz
Filter model	CR-12AF 1pc.		CR-17AF 1pc.	CR-12AF 1pc.
Power cord (3m)	2PNCT　4-core 1.25㎜²		2PNCT　4-core 2㎜²	2PNCT　4-core 3.5㎜²
Weight	25kg	33kg	46kg	68kg
Price	JPY 379,720	JPY 395,010	JPY 508,640	JPY 595,320

Model	TCU8K				TCU12K		TCU20K
Type	3220~440 -3K	3220~440 -4K	3220~440 -6K	3220~440 -8K	3220~440 -10K	3220~440 -12K	3220~440 -15K	3220~440 -20K
Power	3-phase 220V･380V・400V・440V 50/60Hz
Heater control capacity	Less than 3-phase 8kW				Less than 3-phase 12kW		Less than 3-phase 20kW
Matching super heater	SH41		SH51		SH61		SH71
Function	Outlet hot-air temp. control, Hot-start temp. control, Overheat prevention function, Inlet temp. abnormal, External input signal, Each safety circuit
Heater core (3m)	2PNCT 4-core 3.5mm²						2PNCT 4-core 5.5mm² + 3-core 5.5mm²
Sensor cord (3m)	4-pairs 　VX-G　0.3mm²　Compensating wire
Weight	14kg						19kg
Price	JPY 438,350				JPY 463,650		JPY 554,400

The post Kansai Electric Heat Corp Super Heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Pen Heater

kvt part2 — Sat, 28 Nov 2020 06:14:43 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Pen Heater

Features

This is the clean heater that the self emission dust quantity was restrained to about class 10,000.
* Light, elongate, and slim form.
* High accuracy temp. can be controlled by Multi-controller.
* For the compressor air.
* Max. hot-air temp. 750ﾟC (PH22 800W)

Specification

Model	PH12	PH22
Type	1200-04K	1200-06K	1200-08K
Power	Single-phase 200V　50/60Hz
Heater capacity	400W	600W	800W
Max. hot-air temp.	600ﾟC	700ﾟC	750ﾟC
A-sensor / B-sensor	A-sensor : For detecting the hot-air /
A-sensor / B-sensor	B-sensor : For detecting the hot-start operation and overheat temp.
Min. usable air volume	10NL/min * Please use less than 400ﾟC.
Max. usable air volume	250L/min
Resisting pressure	0.5MPa (Max.)
Matching Multi-controller	TRC202-P04	TRC202-P06	TRC202-P08

Model	TRC202-P04	TRC202-P06	TRC202-P08
Power 50/60Hz	Single-phase AC100V – Single-phase AC200V･220V
Matching	PH12(1200-04K)	PH22(1200-06K)	PH22(1200-08K)
Pen heater
Hot-air temp. control range	Normal – 600ﾟC	Normal – 650ﾟC	Normal – 700ﾟC
Hot-start temp.	Normal + α – 250ﾟC
Control range
Overheat temp.	550ﾟC	650ﾟC	700ﾟC
Control range

The post Kansai Electric Heat Corp Pen Heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Spot heater

kvt part2 — Sat, 28 Nov 2020 04:53:52 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Spot heater

Features

Satisfactory temperature control is achievable through the incorporation of both A-sensor (for detecting outlet hot air) and B-sensor (for detecting hot start and overheat temperatures).

Utilizing the Multi-controller TRC202 extends the lifespan of the heater element and enables long-term, stable usage of high-temperature hot air at 800°C.

Hot-start operation for intermittent operation is possible by using with Multi-controller TRC202.

The hot-start operation instantly releases up to 500°C hot air by energizing the heater when there’s no initial airflow

Specification

Model	SH02		SH22			SH31
Type	1100-07K	1200-055K	1200-06K	1200-08K	1200-1.2K	1200-2K	1200-3K
Power 50/60Hz	Single-phase 100V	Single-phase 200V
Heater capacity	700W	550W	600W	800W	1200W	2000W	3000W
Max. hot-air temp.	800ﾟC (When Multi-controller TRC202 is used.)
Hot-start temp.	Less than 500ﾟC (When Multi-controller TRC202 is used.)
Max. usable air volume	120L/min		400L/min			1050L/min
Min. usable air volume	5L/min		15L/min			60L/min
Resisting pressure	Less then 490kPa
Weight	260g		560g			1.1kg
Delivery	Immediate delivery – 3 weeks

Model	TRC202
Power 50/60Hz	Single-phase 100V,
Power 50/60Hz	or Single-phase 200V
Heater control capacity	Single-phase 2kW(at 100V)
Heater control capacity	Single-phase 4kW(at 200V)
Max. load current	20A (Heater load)
Instructions accuracy	800ﾟC plus-minus 0.2%FS
Control method	Phase control (Control action : PID action)
Weight	1kg
Function	Heater On/OFF by the external signal Change of a/the mode of operation by the external signal Hot-start operation / Normal operation Abnormal signal, Output of operation situation Temp. alarm Auto-tuning

The post Kansai Electric Heat Corp Spot heater first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp Shrink Nozzle

kvt part2 — Sat, 28 Nov 2020 04:43:43 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: Shrink nozzle

Features

Shrink tunnel oven can be executed easily and cheaply by connecting to Portable dryer PD-12.
Ideal hot-air to shrink packing (250ﾟC – 350ﾟC) can be discharged by the shrink nozzle. (At using PD-12 2500W)

Specification

Type	L type		W type		H type
Type	Long type that width and height were restrained		Width type		Type that the height was secured
Model	L360	L300	W200	W150	H300	H250
Inside effective measure	L : 360	L : 300	L : 200	L 125	L : 120	L : 120
	W : 70	W : 100	W : 200	W : 150	W : 120	W : 120
	H : 70	H : 70	H : 70	H : 200	H : 300	H : 250
Supply inlet form	Supply inlet for Portable dryer PD-12
Accessories	Fixation metal fittings 4 pcs.

The post Kansai Electric Heat Corp Shrink Nozzle first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp PD-12 Portable Dryer

kvt part2 — Sat, 28 Nov 2020 03:53:37 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: PD-12

Features

Auto-cooling operation function (New equipment) Digital temp. display

features a digital air volume display (%), an input-output service terminal (an industry first!), and a temperature alarm output function. It also comes with an inlet filter, overheat prevention sensor, and built-in temperature fuse.

You can install the unit at any angle using the handle. It will also stop automatically after cooling if you turn off the operation switch while it’s operating in a downward position, thanks to its auto-cooling feature based on the inside temperature when the operation stops.

Specification

Model	PD-12
Type	PD1100-1.4	PD1200-2.5	PD1230-2.5	PD1200-3.2	PD1230-3.2
Power	Single-phase 100V	Single-phase 200V	Single- phase 230V	Single-phase 200V	Single-phase 230V
Heater capacity	1400W	2500W		3200W
Auto-temp. control range	Normal temp. – 650ﾟC　* When the discharge angle is more downward than level, Normal temp. – 450ﾟC
Accessories	Flange adapter PDF65, Discharge nozzle PDN70
Max. air volume	520L/min	450L/min
Max. static pressure	0.44kPa
Power cord	2-core * 2mm2 * 4m	3-core : 2m2 : 4m
	Soft cable (High flexible type)
Weight	2.4㎏	2.6㎏

The post Kansai Electric Heat Corp PD-12 Portable Dryer first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp HAS-Series Multi-Dryer

kvt part2 — Sat, 28 Nov 2020 02:58:17 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: HAS-Series

Features

Connector-mounted external sensor function. Eqipped with external operation function

Abnormal Output function. Timer operation function(Time is displayed)

Specification

MODEL	ＨＡＳ－１７Ｔ		ＨＡＳ－２７Ｔ	ＨＡＳ－３７Ｔ	ＨＡＳ－４７Ｔ
TYPE	1100-1.4C-007X	1200-1.7C-007X	1200-2.8C-007X	1200-3.7C-006X	1200-5C-013X
POWER SUPPLY　50/60Hz	SINGLE PHASE100V	SINGLE PHASE 200V
HEATER VOL（CURRENT VALUE）	1.4kW（14A）	1.7kW（8.5A）	2.8kW（14A）	3.7kW（18.5A）	5kW（25A）
CONTINUOUS USE HOT-AIR TEMP.	AMBIENT TEMP～200℃			AT～300℃	AT～200℃
OUTLET BORE	φ50mm（SUS PIPE）			φ65mm（SUS PIPE）	φ75mm（SUS PIPE）
MAX AIR VOL.　50/60Hz	1.4m³/min			2.6m³/min	4.4m³/min
MAX AIR STATIC PRESSURE　50/60Hz	1800Pa			1700Pa
MOTOR VOL.（CURRENT VALUE）	74.4W（DC24V 3.1A）			64.8W（DC24V 5.4A）	130W（DC24V 10.8A）
NOISE　50/60Hz	57dB			60dB	61dB
POWER SUPPLY CABLE	2CORE×2mm²×5m SOFT CABLE	3CORE×2mm²×5m　SOFT CABLE		3CORE×3.5mm²×5m
WEIGHT	5.8kg±5%	6.0kg±5%	6.8kg±5%	11kg±5%	14kg±5%
CAP／OUTLET	WF4215／－	WF5320／WK1320			－/－
FILTER	With suction port filter and 5 spare filters (stored in silencer cover)
ACCESORIES	HANGING BRACKET （Please purchase a commercially available shoulder belt.）				－

OLD MODEL	HAS-15T		HAS-25T	HAS-35・36T	HAS-42

MODEL	ＨＡＳ－３７ＴＦ	ＨＡＳ－４７ＴＦ	MODEL	ＨＡＳ－１２	ＨＡＳ－２２
TYPE	1200-3.7C-006XF	1200-5C-013XF	TYPE	－	－
POWER SUPPLY　50/60Hz	SINGLE PHASE 200V		POWER SUPPLY　50/60Hz	SINGLE PHASE100V	SINGLE PHASE 200V/200V･220V
HEATER VOL.（CURRENT VALUE）	3.7kW（18.5A）	5kW（25A）	HEATER VOL（CURRENT VALUE）	1.4kW（14A）	2.8kW（14A）
CONTINUOUS USE HOT-AIR TEMP	AT～300℃	AT～200℃	CONTINUOUS USE HOT-AIR TEMP	AT～300℃	AT～300℃
OUTLET BORE	φ65mm（SUS PIPE）	φ75mm（SUS PIPE）	OUTLET BORE	φ50mm（SUS PIPE）
MAX AIR VOL　50/60Hz	2.2m³/min	3.7m³/min	MAX AIR VOL　50/60Hz	1.0/1.2m³/min	1.2/1.5m³/min
MAX AIR STATIC PRESSURE　50/60Hz	1700Pa		MAX AIR STATIC PRESSURE　50/60Hz	130/200Pa	200/290Pa
MOTOR VOL.（CURRENT VALUE）	64.8W（DC24V 5.4A）	130W（DC24V 10.8A）	MOTOR VOL.（CURRENT VALUE）	12W（0.29A/0.37A）	21W（0.25A/0.30A）
NOISE　50/60Hz	58dB	59dB	NOISE　50/60Hz	46/49dB	47/50dB
POWER SUPPLY CABLE	3CORE×3.5mm²×5m　SOFTCABLE		POWER SUPPLY CABLE	2CORE×2mm²×5m	3CORE×2mm²×5m
WEIGHT	12.5kg±5%	15kg±5%	WEIGHT	5.9kg±5%	7.3kg±5%
CAP／OUTLET	－	－	CAP／OUTLET	WF4215/－	WF5320/WK1320
FILTER	HIGH-PERFORMANCE FILTER		FILTER	SPARE FILTER　1SHEET

OLD MODEL	HAS-35F･36TF	－	OLD MODEL	HAS-11	HAS-21

The post Kansai Electric Heat Corp HAS-Series Multi-Dryer first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp KD Series T.S.K Hot-air Generator

kvt part2 — Sat, 28 Nov 2020 02:21:36 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: KD Series

Features

Continuous use max. hot-air temp. 350ﾟC

Discharge pressure is more than 12kPa.

An air volume control inverter is part of its equipment.

Hot-air circulation of 160ﾟC can be correspond at all type. (Energy saving !)

They have equipped all types with a demi-filter and an input-output service terminal.

They have constructed a safety circuit for each one, and each safety circuit employs a high-reliability thermocouple.

Specification

Model	Type	Power	Heater	Continuous use max. temp.	Motor capacity	Max. air volume	Max. static presuure
		50/60Hz	capacity			(m3/min)	(kPa)
KD-24H3	3200-3C-1.5HY-LB	3-phase 200V	3kW	350ﾟC	1.5kW	7.1	12.1
	3200-5C-1.5HY-LB	plus minus 10%	5kW
	3200-7.5C-1.5HY-LB		7.5kW
KD-56H3	3200-9C-2.2HY-LB		9kW		2.2kW	10	13.5
	3200-12.5C-2.2HY-LB		12.5kW
KD-72H3	3200-15C-3.7HY-LB		15kW		3.7kW	18	13.5
	3200-20C-3.7HY-LB		20kW
KD-82H2	3200-20C-5.5HY-LB		20kW		5.5kW	27.8	13.2
	3200-30C-5.5HY-LB		30kW
KD-82H3	3200-20C-7.5HY-LB		20kW		7.5kW	28.5	18.4
	3200-30C-7.5HY-LB		30kW
KD-82H5	3200-320C-11HY-L		30kW		11kW	24	24

The post Kansai Electric Heat Corp KD Series T.S.K Hot-air Generator first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat P-Type Series Hot-Air Generator

kvt part2 — Sat, 28 Nov 2020 01:46:59 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: P-Type Series: TSK-24P, TSK-24PS, TSK-56P, TSK-56PS, TSK-72P

Features

Continuous use max. hot-air temp. 350ﾟC
It includes an air volume control inverter
Includes an air volume control inverter
A demi-filter for all types, and only TSK-72P has the Demand function
They have constructed each safety circuit, and each safety circuit utilizes a high-reliability thermocouple

Specification

Model	Type	Power	Heater capacity	Inlet Outlet Bore	Max. air volume m³／min	Max. static pressure kPa	Motor capacity
TSK-24P	3200-3C-04PY-LB	3-phase 200V plus minus 10%	3kW	φ75	4.5	3.4	400W
	3200-5C-04PY-LB		5kW
	3200-7.5C-04PY-LB		7.5kW
TSK-24PS	3200-3C-1.5PY-LB		3kW		10.2	5.9	1.5kW
	3200-5C-1.5PY-LB		5kW
	3200-7.5C-1.5PY-LB		7.5kW
TSK-56P	3200-9C-1.5PY-LB		9kW	φ125	16.5	5.9	1.5kW
	3200-12.5C-1.5PY-LB		12.5W
TSK-56PS	3200-9C-2.2PY-LB		9kW		20.1	6.5	2.2kW
	3200-12.5C-2.2PY-LB		7.5kW
TSK-72P	3200-15C-2.2PY-LB		15kW		20.3	6.5	2.2kW
	3200-20C-2.2PY-LB		20kW

The post Kansai Electric Heat P-Type Series Hot-Air Generator first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp H-Type Series T.S.K Hot-air Generator

kvt part2 — Fri, 27 Nov 2020 09:44:57 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: H-Type Series

Features

Various features adorn the high-pressure blower.
Input-output service terminals are available on all types of this blower.
We install safety circuits in each type of blower, and we use high-reliability thermocouples in these safety circuits.
This blower has achieved a noise reduction of about 5dB
You have the option to install an inverter for this blower.

Specification

Model	Type	Power	Heater	Continuous use	Motor capacity	Max. air volume	Max. static pressure
		50/60Hz	capacity	max. temp.	(kW)	(m3/min)	(kPa)
					50/60Hz	50/60Hz	50/60Hz
TSK-22H4	3200-3C-X4-L	3-phase	3kW	350ﾟC	0.55/0.85	1.9/2.2	10.1/13.8
TSK-22H4	3200-5C-X4-L	200V/	5kW		0.55/0.85	1.9/2.2	10.1/13.8
TSK-32H5	3200-7.5C-X5-L	200V･220V	7.5kW		1.3/1.9	2.9/3.3	15.0/17.3
TSK-52H6	3200-10C-X6-L	–	10kW		2.3/3.4	4.1/4.9	19.8/24.1
TSK-53H7	3200-12C-X7-L	–	12kW		3.3/5.0	5.4/6.1	17.5/22.9
TSK-62H8	3200-15C-X8-L	–	15kW		5.0/7.0	8.0/9.3	23.8/26.5
TSK-72H9	3200-20C-X9-L	–	20kW		7.0/11.0	10.1/12.1	24.8/25.0

The post Kansai Electric Heat Corp H-Type Series T.S.K Hot-air Generator first appeared on Kouei Japan Trading | Get Quotation.

Kansai Electric Heat Corp C-Type Series T.S.K Hot-air Generator

kvt part2 — Fri, 27 Nov 2020 08:53:07 +0000

Made in Japan
Manufacturer: Kansai Electric Heat Corp
Model: C-Type Series

Features

Hot-air operations are sustainable at temperatures up to 350°C.

All models boast an inverter-controlled air volume to improve energy efficiency;Additionally, they are equipped with a heatproof blower for hot-air circulation. The maximum circulation temperatures vary by model: 140°C for TSK-18, 230°C for TSK-23 to TSK-132, and 260°C for TSK-50HT.

All models include input-output service terminals and incorporate safety circuits with high-precision thermocouples for enhanced reliability.

The system supports remote control functionality and directional adjustment.

Specification

Model	Type	Power	Heater capacity	Continuous use max. temp.	Motor capacity	Max. air volume (m3/min)	Max. static pressure (kPa)	Category
TSK-18	3200-2C-008Y	3-phase 200V 50/60Hz	2kW	350ﾟC	80W	3.5	0.95	Standard
	3200-3.5C-008Y		3.5kW					Standard
	3200-5C-008Y		5kW					Standard
TSK-23	3380~480-3C-013YA-LB	3-phase 380V, 400V, 415V, 440V, 480V 50/60Hz	3kW		130W	5.3	1.2	Standard
	3380~480-5C-013YA-LB		5kW					Standard
TSK-33	3380~480-7.5C-013YA-LB		7.5kW					Standard
TSK-42	3380~480-8C-025Y-LB		8kW		250W	7.7	1.52	Standard
TSK-52	3380~480-10C-025Y-LB		10kW					Standard
TSK-56	3380~480-9C-04Y-LB		9kW		400W	15.5	1.5	Standard
	3380~480-12.5C-04Y-LB		12.5kW
TSK-62	3380~480-15C-075Y-LB		15kW		750W	15	2.45	Standard
TSK-72	3380~480-20C-075Y-LB		20kW					Standard
TSK-82	3380~480-30C-1.5Y-LB		30kW		1.5kW	24.8	2.83	Standard
TSK-92	3380~480-35C-2.2Y-LB		35kW		2.2kW	38.3	4	Standard
TSK-102	3380~480-45C-2.2Y-LB		45kW					Standard
TSK-122	3380~480-60C-3.7Y-LB		60kW		3.7kW	51	5.1	Order
	3380~480-80C-3.7Y-LB		80kW
TSK-132	3380~480-60C-5.5Y-LB		60kW		5.5kW	62	6
	3380~480-80C-5.5Y-LB		80kW

The post Kansai Electric Heat Corp C-Type Series T.S.K Hot-air Generator first appeared on Kouei Japan Trading | Get Quotation.