Vibration motor | Kouei Japan Trading | Get Quotation https://koueitrading.com/global Purchase tools and equipments made in Japan Sat, 16 Aug 2025 07:00:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.7.5 https://koueitrading.com/global/wp-content/uploads/2018/01/cropped-KoueiVietnam-logo-32x32.png Vibration motor | Kouei Japan Trading | Get Quotation https://koueitrading.com/global 32 32 EXEN ADV50VA-6M High Frequency Internal Vibrator Automatic Drive System https://koueitrading.com/global/product/exen-adv50va-6m-high-frequency-internal-vibrator-automatic-drive-system/ Fri, 11 Dec 2020 07:03:26 +0000 https://koueitrading.com/global/?post_type=product&p=23364 Products Made In Japan Manufacturer: EXEN Model: ADV50VA-6M Features Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply. The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV). There is one […]

The post EXEN ADV50VA-6M High Frequency Internal Vibrator Automatic Drive System first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: ADV50VA-6M

Features

Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply.
The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV).
There is one model with its box being an ADS.
There are two models with their vibrators being 40 mm in diameter with ADV 40 VA (6M) and 50 mm in diameter with ADV 50 VA (6M) for architectural and civil engineering purposes.
The vibrating body of the vibrator vibrates while in contact with freshly mixed concrete. This relieves the worker of the trouble of turning on and off the switch, thereby saving labor. Moreover, the vibrator does not run idle, which used to occur when moving to another concreting point or waiting for another batch of concrete to be poured. This makes it hard for the vibrating body of the vibrator automatic operation system to heat up. It is thus energy-saving and efficient.

It vibrates when it senses freshly mixed concrete and is easy to operate

The ADS begins to vibrate when its vibrating body enters into contact with freshly mixed concrete and stops vibrating when its vibrating unit is pulled out of the concrete.
This simplifies switch operation and makes it hard for the vibrating body of this internal vibrator to heat up and easy to operate in concreting.

Compatible with your existing high-frequency power supply

The high-frequency power for the ADS automatic operation system can be supplied with the 48 V series power supply inverter series or generator series that you may already have.

Composition of the automatic operation system (ADS)

The composition of the automatic operation system is used as connected to the box (ADS) that senses the contact of the ADV with concrete between the high-frequency power supply and the special-purpose high-frequency internal vibrator (ADV).
The system vibrates while the ADV is in contact with concrete and stops vibrating when pulled out.

High frequency internal vibrator automatic drive system ADS series

Auto/manual operation switchover Ａ

To set the ADS special-purpose vibrator (ADV) to manual mode (by turning on and off the switch at hand), you can install an optional conversion cord (4P-EP30) to the vibrator and connect it directly to a high-frequency power supply.
Use it should your ADS malfunction or when you need to check your ADV for failure.

High frequency internal vibrator automatic drive system ADS series

Connectable directly to the HC/HAG series by using a conversion cord assembly

 

Safe automatic operation

The voltage sensitivity of the automatic operation system is set to low, which is unlikely to cause electric shocks.
This enables safe concreting.

Energy-saving, efficient vibrator oriented toward a next generation

The automatic operation system (ADS) starts or stops when it senses the contact of the vibrating body of the vibrator with freshly mixed concrete.
The vibrating unit therefore does not run idle, which used to be seen with conventional vibrators, when concrete is poured. The vibrating body does not readily heat up, thereby refraining from wasting energy. As a result, concreting can be efficiently performed, resulting in conserving energy on worksites.
When you pull the vibrator out of the freshly mixed concrete, the vibrating body stops vibrating the moment the vibrating body leaves the concrete. When, therefore, pulling it out, you will stop feeling the vibration in your hand holding the hose, resulting in reduced fatigue and safer concreting.

Test run for automatic operation

Before concreting, be sure to check that the automatic operation system (ADS) runs problem-free.
*You can do this check with the vibrator (ADV) turned off.

１）Checking the vibrator
After installing the automatic operation system (ADS), turn on the high-frequency power.
Check that the ADS power lamp (green) goes on, then put the sensor clip of the ADS in contact with the vibrating unit of the vibrator (ADV).
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can do the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

２）On-site check before concreting
Install the automatic operation system (ADS), then turn on the high-frequency power.
Check that the ADS power lamp (green) is on, then install the sensor clip of the ASD on an electrically conductive rebar or cord mold close to the concreting site.
After that, put the vibrating body of the vibrator in contact with a rebar or cord on the site of concreting.
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can run the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

High frequency internal vibrator automatic drive system ADS series

Test run procedure

 

High frequency internal vibrator automatic drive system ADS series

Safe work! Ensure that every time you leave, turn off the power and switch

Basically, if the vibrator is not in a state to sense the sensor, it does not begin to run automatically. For an intermission or otherwise, to avoid malfunctioning, when you leave the vibrator, always ensure that you turn off the intermediate switch of the ADV vibrator and the inverter power of the power supply.

Specification

Model Output
(W)		 Voltage
(V)		 Current
(A)		 Frequency
(Hz)		 Total length
(mm)		 Head length
(dia×length)
(mm)		 Hose length
(dia×length)
(mm)		 Weight
(kg)
ADV40VA 250 48 5.5 200/240 6484 43×330 33X6000 12.7
ADV50VA 400 9.0 6534 52×380 36X6000 15.6

（Imperial System）

Model Output
(W)		 Voltage
(V)		 Current
(A)		 Frequency
(Hz)		 Total length
(ft)		 Head length
(dia×length)
(in×ft)		 Hose length
(dia×length)
(in×ft)		 Weight
(lb)
ADV40VA 250 48 5.5 200/240 21’3″ 19/16″X1’1″ 1.3X19’7″ 28.0
ADV50VA 400 9.0 21’4″ 2.0″X1’2″ 1.4X19’7″ 34.4

*Product masses include that of the external cord(15m)
*For “Selecting extension cables” and “Number of high-frequency vibrators that can be used simultaneously,” see the relevant page.

Dimensions, installation, control panel

Model Total length
(mm)		 Head length
(dia× length)
(mm)		 Hose length
(dia× length)
(mm)
ADV40VA 6484 43×330 33X6000
ADV50VA 6534 52×380 36X6000

（Imperial System）

Model Total length
(ft)		 Head length
(dia× length)
(in×ft)		 Hose length
(dia× length)
(in×ft)
ADV40VA 21’3″ 19/16″X1’1″ 1.3X19’7″
ADV50VA 21’4″ 2.0″X1’2″ 1.4X19’7″
The post EXEN ADV50VA-6M High Frequency Internal Vibrator Automatic Drive System first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN HKM75LFSA High-frequency Vibration Motors https://koueitrading.com/global/product/exen-hkm75lfsa-high-frequency-vibration-motors/ Fri, 11 Dec 2020 04:48:08 +0000 https://koueitrading.com/global/?post_type=product&p=23357 Products Made In Japan Manufacturer: EXEN Model: HKM75LFSA Powerful transmission of vibration by single-touch fixing This product is used for the following applications: Manufacturing of secondary concrete products Secondary concreting for tunnels Features High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for […]

The post EXEN HKM75LFSA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: HKM75LFSA

Powerful transmission of vibration by single-touch fixing

This product is used for the following applications:

  • Manufacturing of secondary concrete products
  • Secondary concreting for tunnels

  • Features

    High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for not only in box culverts and concrete segments but L-shaped retaining walls, PC plates, and other large concrete products as well. These are also applicable to pouring a secondary layer for tunnels, subway works, shield works, and other projects.

    Transmitting powerful vibration by single-touch fixing

    Fixed with a single bolt that is easy to detach and reattach, these machines transmit vibration stably and pour concrete in a resonance-free and silent manner.

    (1) Insert the hook of the vibration motor into the hook base assembly fixed in a mold or something similar.
    (2) Lift the motor by using the hook as the support.
    (3) Let the motor-fixing bolt into the bolt ditch and fasten the flange nut with a ratchet.

    High-frequency vibration motors / hook base type HKM series

    Hermetic structure

    Highly airtight, these machines can provide steam curing as installed on a mold. They prevent a decline in insulation and increase ease of operation.

    Adjusting centrifugal force achieves silent concreting

    The weights (fanlike eccentric weights) installed on both sides of the vibration motor can be adjusted in angle to adjust centrifugal force.
    With simple adjustment and a high-frequency inverter, these units produce a centrifugal force that matches the input of freshly mixed concrete, achieving silent concreting.

    High-frequency vibration motors / hook base type HKM series

    Using an inverter converts frequency

    Equipped with a series of high-frequency inverters (with volume control), these products can be set to a desired frequency setting according to the product dimensions and mold shape.
    Setting the high-frequency vibration motor to a desired frequency and a desired centrifugal force provides different vibrations for concreting and finishing, and provides silent concreting that avoids resonance with molds.

    A sharable hook base

    The mounting hook base is shared for HKM55LFA (SA) and HKM75LFA (SA).
    When you need to move molds or vary vibration in a factory, you can install the same hook base for them.

    Specification

    HKM-LFA(SA)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (kN)    		 Weight
    (kg)
    HKM55LFA 550 48 12.5 No 50～120 8.8 16.5
    HKM55LFSA Yes 17.5
    HKM75LFA 750 17.0 No 11.6 21.3
    HKM75LFSA Yes 22.3

    (Imperial System)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (lbf)    		 Weight
    (lb)
    HKM55LFA 550 48 12.5 No 50～120 1978 36.4
    HKM55LFSA Yes 38.6
    HKM75LFA 750 17.0 No 2608 46.9
    HKM75LFSA Yes 49.1

    *Product masses include that of the cable (1.7Kg) and the intermediate switches (0.9Kg).

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model H L W
    HKM55LFA 240 218 213
    HKM55LFSA
    HKM75LFA 305 213 218
    HKM75LFSA

    (Imperial System)

    Model H L W
    HKM55LFA 8.4 9.4 8.6
    HKM55LFSA
    HKM75LFA 8.6 1’0″ 8.4
    HKM75LFSA

    Product dimensional drawings

The post EXEN HKM75LFSA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN ADV40VA-6M High Frequency Internal Vibrator Automatic Drive System https://koueitrading.com/global/product/exen-adv40va-6m-high-frequency-internal-vibrator-automatic-drive-system/ Fri, 11 Dec 2020 02:42:21 +0000 https://koueitrading.com/global/?post_type=product&p=23361 Products Made In Japan Manufacturer: EXEN Model: ADV40VA-6M Features Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply. The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV). There is one […]

The post EXEN ADV40VA-6M High Frequency Internal Vibrator Automatic Drive System first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: ADV40VA-6M

Features

Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply.
The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV).
There is one model with its box being an ADS.
There are two models with their vibrators being 40 mm in diameter with ADV 40 VA (6M) and 50 mm in diameter with ADV 50 VA (6M) for architectural and civil engineering purposes.
The vibrating body of the vibrator vibrates while in contact with freshly mixed concrete. This relieves the worker of the trouble of turning on and off the switch, thereby saving labor. Moreover, the vibrator does not run idle, which used to occur when moving to another concreting point or waiting for another batch of concrete to be poured. This makes it hard for the vibrating body of the vibrator automatic operation system to heat up. It is thus energy-saving and efficient.

It vibrates when it senses freshly mixed concrete and is easy to operate

The ADS begins to vibrate when its vibrating body enters into contact with freshly mixed concrete and stops vibrating when its vibrating unit is pulled out of the concrete.
This simplifies switch operation and makes it hard for the vibrating body of this internal vibrator to heat up and easy to operate in concreting.

Compatible with your existing high-frequency power supply

The high-frequency power for the ADS automatic operation system can be supplied with the 48 V series power supply inverter series or generator series that you may already have.

Composition of the automatic operation system (ADS)

The composition of the automatic operation system is used as connected to the box (ADS) that senses the contact of the ADV with concrete between the high-frequency power supply and the special-purpose high-frequency internal vibrator (ADV).
The system vibrates while the ADV is in contact with concrete and stops vibrating when pulled out.

High frequency internal vibrator automatic drive system ADS series

Auto/manual operation switchover Ａ

To set the ADS special-purpose vibrator (ADV) to manual mode (by turning on and off the switch at hand), you can install an optional conversion cord (4P-EP30) to the vibrator and connect it directly to a high-frequency power supply.
Use it should your ADS malfunction or when you need to check your ADV for failure.

High frequency internal vibrator automatic drive system ADS series

Connectable directly to the HC/HAG series by using a conversion cord assembly

 

Safe automatic operation

The voltage sensitivity of the automatic operation system is set to low, which is unlikely to cause electric shocks.
This enables safe concreting.

Energy-saving, efficient vibrator oriented toward a next generation

The automatic operation system (ADS) starts or stops when it senses the contact of the vibrating body of the vibrator with freshly mixed concrete.
The vibrating unit therefore does not run idle, which used to be seen with conventional vibrators, when concrete is poured. The vibrating body does not readily heat up, thereby refraining from wasting energy. As a result, concreting can be efficiently performed, resulting in conserving energy on worksites.
When you pull the vibrator out of the freshly mixed concrete, the vibrating body stops vibrating the moment the vibrating body leaves the concrete. When, therefore, pulling it out, you will stop feeling the vibration in your hand holding the hose, resulting in reduced fatigue and safer concreting.

Test run for automatic operation

Before concreting, be sure to check that the automatic operation system (ADS) runs problem-free.
*You can do this check with the vibrator (ADV) turned off.

１）Checking the vibrator
After installing the automatic operation system (ADS), turn on the high-frequency power.
Check that the ADS power lamp (green) goes on, then put the sensor clip of the ADS in contact with the vibrating unit of the vibrator (ADV).
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can do the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

２）On-site check before concreting
Install the automatic operation system (ADS), then turn on the high-frequency power.
Check that the ADS power lamp (green) is on, then install the sensor clip of the ASD on an electrically conductive rebar or cord mold close to the concreting site.
After that, put the vibrating body of the vibrator in contact with a rebar or cord on the site of concreting.
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can run the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

High frequency internal vibrator automatic drive system ADS series

Test run procedure

 

High frequency internal vibrator automatic drive system ADS series

Safe work! Ensure that every time you leave, turn off the power and switch

Basically, if the vibrator is not in a state to sense the sensor, it does not begin to run automatically. For an intermission or otherwise, to avoid malfunctioning, when you leave the vibrator, always ensure that you turn off the intermediate switch of the ADV vibrator and the inverter power of the power supply.

Specification

Model Output
(W)		 Voltage
(V)		 Current
(A)		 Frequency
(Hz)		 Total length
(mm)		 Head length
(dia×length)
(mm)		 Hose length
(dia×length)
(mm)		 Weight
(kg)
ADV40VA 250 48 5.5 200/240 6484 43×330 33X6000 12.7
ADV50VA 400 9.0 6534 52×380 36X6000 15.6

（Imperial System）

Model Output
(W)		 Voltage
(V)		 Current
(A)		 Frequency
(Hz)		 Total length
(ft)		 Head length
(dia×length)
(in×ft)		 Hose length
(dia×length)
(in×ft)		 Weight
(lb)
ADV40VA 250 48 5.5 200/240 21’3″ 19/16″X1’1″ 1.3X19’7″ 28.0
ADV50VA 400 9.0 21’4″ 2.0″X1’2″ 1.4X19’7″ 34.4

*Product masses include that of the external cord(15m)
*For “Selecting extension cables” and “Number of high-frequency vibrators that can be used simultaneously,” see the relevant page.

Dimensions, installation, control panel

Model Total length
(mm)		 Head length
(dia× length)
(mm)		 Hose length
(dia× length)
(mm)
ADV40VA 6484 43×330 33X6000
ADV50VA 6534 52×380 36X6000

（Imperial System）

Model Total length
(ft)		 Head length
(dia× length)
(in×ft)		 Hose length
(dia× length)
(in×ft)
ADV40VA 21’3″ 19/16″X1’1″ 1.3X19’7″
ADV50VA 21’4″ 2.0″X1’2″ 1.4X19’7″
The post EXEN ADV40VA-6M High Frequency Internal Vibrator Automatic Drive System first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN HKM75LFA High-frequency Vibration Motors https://koueitrading.com/global/product/exen-hkm75lfa-high-frequency-vibration-motors/ Fri, 11 Dec 2020 01:44:18 +0000 https://koueitrading.com/global/?post_type=product&p=23355 Products Made In Japan Manufacturer: EXEN Model: HKM75LFA Powerful transmission of vibration by single-touch fixing This product is used for the following applications: Manufacturing of secondary concrete products Secondary concreting for tunnels Features High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for […]

The post EXEN HKM75LFA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: HKM75LFA

Powerful transmission of vibration by single-touch fixing

This product is used for the following applications:

  • Manufacturing of secondary concrete products
  • Secondary concreting for tunnels

  • Features

    High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for not only in box culverts and concrete segments but L-shaped retaining walls, PC plates, and other large concrete products as well. These are also applicable to pouring a secondary layer for tunnels, subway works, shield works, and other projects.

    Transmitting powerful vibration by single-touch fixing

    Fixed with a single bolt that is easy to detach and reattach, these machines transmit vibration stably and pour concrete in a resonance-free and silent manner.

    (1) Insert the hook of the vibration motor into the hook base assembly fixed in a mold or something similar.
    (2) Lift the motor by using the hook as the support.
    (3) Let the motor-fixing bolt into the bolt ditch and fasten the flange nut with a ratchet.

    High-frequency vibration motors / hook base type HKM series

    Hermetic structure

    Highly airtight, these machines can provide steam curing as installed on a mold. They prevent a decline in insulation and increase ease of operation.

    Adjusting centrifugal force achieves silent concreting

    The weights (fanlike eccentric weights) installed on both sides of the vibration motor can be adjusted in angle to adjust centrifugal force.
    With simple adjustment and a high-frequency inverter, these units produce a centrifugal force that matches the input of freshly mixed concrete, achieving silent concreting.

    High-frequency vibration motors / hook base type HKM series

    Using an inverter converts frequency

    Equipped with a series of high-frequency inverters (with volume control), these products can be set to a desired frequency setting according to the product dimensions and mold shape.
    Setting the high-frequency vibration motor to a desired frequency and a desired centrifugal force provides different vibrations for concreting and finishing, and provides silent concreting that avoids resonance with molds.

    A sharable hook base

    The mounting hook base is shared for HKM55LFA (SA) and HKM75LFA (SA).
    When you need to move molds or vary vibration in a factory, you can install the same hook base for them.

    Specification

    HKM-LFA(SA)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (kN)    		 Weight
    (kg)
    HKM55LFA 550 48 12.5 No 50～120 8.8 16.5
    HKM55LFSA Yes 17.5
    HKM75LFA 750 17.0 No 11.6 21.3
    HKM75LFSA Yes 22.3

    (Imperial System)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (lbf)    		 Weight
    (lb)
    HKM55LFA 550 48 12.5 No 50～120 1978 36.4
    HKM55LFSA Yes 38.6
    HKM75LFA 750 17.0 No 2608 46.9
    HKM75LFSA Yes 49.1

    *Product masses include that of the cable (1.7Kg) and the intermediate switches (0.9Kg).

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model H L W
    HKM55LFA 240 218 213
    HKM55LFSA
    HKM75LFA 305 213 218
    HKM75LFSA

    (Imperial System)

    Model H L W
    HKM55LFA 8.4 9.4 8.6
    HKM55LFSA
    HKM75LFA 8.6 1’0″ 8.4
    HKM75LFSA

    Product dimensional drawings

The post EXEN HKM75LFA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN ADS Automatic Operation Electric Distribution Box https://koueitrading.com/global/product/exen-ads-automatic-operation-electric-distribution-box/ Fri, 11 Dec 2020 00:59:57 +0000 https://koueitrading.com/global/?post_type=product&p=23359 Products Made In Japan Manufacturer: EXEN Model: ADS Features Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply. The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV). There is one […]

The post EXEN ADS Automatic Operation Electric Distribution Box first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: ADS

Features

Exen has developed an Automatic Drive System (ADS), a system for automatically running a vibrator by using your own high-frequency vibrator power supply.
The system for automatic operation consists of a box for processing startup stop signals (ADS) and a signal-sensing vibrator (ADV).
There is one model with its box being an ADS.
There are two models with their vibrators being 40 mm in diameter with ADV 40 VA (6M) and 50 mm in diameter with ADV 50 VA (6M) for architectural and civil engineering purposes.
The vibrating body of the vibrator vibrates while in contact with freshly mixed concrete. This relieves the worker of the trouble of turning on and off the switch, thereby saving labor. Moreover, the vibrator does not run idle, which used to occur when moving to another concreting point or waiting for another batch of concrete to be poured. This makes it hard for the vibrating body of the vibrator automatic operation system to heat up. It is thus energy-saving and efficient.

It vibrates when it senses freshly mixed concrete and is easy to operate

The ADS begins to vibrate when its vibrating body enters into contact with freshly mixed concrete and stops vibrating when its vibrating unit is pulled out of the concrete.
This simplifies switch operation and makes it hard for the vibrating body of this internal vibrator to heat up and easy to operate in concreting.

Compatible with your existing high-frequency power supply

The high-frequency power for the ADS automatic operation system can be supplied with the 48 V series power supply inverter series or generator series that you may already have.

Composition of the automatic operation system (ADS)

The composition of the automatic operation system is used as connected to the box (ADS) that senses the contact of the ADV with concrete between the high-frequency power supply and the special-purpose high-frequency internal vibrator (ADV).
The system vibrates while the ADV is in contact with concrete and stops vibrating when pulled out.

High frequency internal vibrator automatic drive system ADS series

Auto/manual operation switchover Ａ

To set the ADS special-purpose vibrator (ADV) to manual mode (by turning on and off the switch at hand), you can install an optional conversion cord (4P-EP30) to the vibrator and connect it directly to a high-frequency power supply.
Use it should your ADS malfunction or when you need to check your ADV for failure.

High frequency internal vibrator automatic drive system ADS series

Connectable directly to the HC/HAG series by using a conversion cord assembly

 

Safe automatic operation

The voltage sensitivity of the automatic operation system is set to low, which is unlikely to cause electric shocks.
This enables safe concreting.

Energy-saving, efficient vibrator oriented toward a next generation

The automatic operation system (ADS) starts or stops when it senses the contact of the vibrating body of the vibrator with freshly mixed concrete.
The vibrating unit therefore does not run idle, which used to be seen with conventional vibrators, when concrete is poured. The vibrating body does not readily heat up, thereby refraining from wasting energy. As a result, concreting can be efficiently performed, resulting in conserving energy on worksites.
When you pull the vibrator out of the freshly mixed concrete, the vibrating body stops vibrating the moment the vibrating body leaves the concrete. When, therefore, pulling it out, you will stop feeling the vibration in your hand holding the hose, resulting in reduced fatigue and safer concreting.

Test run for automatic operation

Before concreting, be sure to check that the automatic operation system (ADS) runs problem-free.
*You can do this check with the vibrator (ADV) turned off.

１）Checking the vibrator
After installing the automatic operation system (ADS), turn on the high-frequency power.
Check that the ADS power lamp (green) goes on, then put the sensor clip of the ADS in contact with the vibrating unit of the vibrator (ADV).
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can do the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

２）On-site check before concreting
Install the automatic operation system (ADS), then turn on the high-frequency power.
Check that the ADS power lamp (green) is on, then install the sensor clip of the ASD on an electrically conductive rebar or cord mold close to the concreting site.
After that, put the vibrating body of the vibrator in contact with a rebar or cord on the site of concreting.
If, when in contact, the ADS output lamp is on in red, then it can be automatically run.
*At that time, you can run the check with the vibrator (ADV) power off. If it is on, you can also check the vibration status of the vibrator.

High frequency internal vibrator automatic drive system ADS series

Test run procedure

 

High frequency internal vibrator automatic drive system ADS series

Safe work! Ensure that every time you leave, turn off the power and switch

Basically, if the vibrator is not in a state to sense the sensor, it does not begin to run automatically. For an intermission or otherwise, to avoid malfunctioning, when you leave the vibrator, always ensure that you turn off the intermediate switch of the ADV vibrator and the inverter power of the power supply.

Specification

Model Input Voltage
(V)		 Output current
(A)		 Nos.of output
socket outlet		 Weight
(kg)
ADS 48 3 2 6.75

（Imperial System）

Model Input Voltage
(V)		 Output current
(A)		 Nos.of output
socket outlet		 Weight
(lb)
ADS 48 3 2 14.9

Dimensions, installation, control panel

Product dimensional drawings

The post EXEN ADS Automatic Operation Electric Distribution Box first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN HKM55LFSA High-frequency Vibration Motors https://koueitrading.com/global/product/exen-hkm55lfsa-high-frequency-vibration-motors/ Fri, 11 Dec 2020 00:37:30 +0000 https://koueitrading.com/global/?post_type=product&p=23353 Products Made In Japan Manufacturer: EXEN Model: HKM55LFSA Powerful transmission of vibration by single-touch fixing This product is used for the following applications: Manufacturing of secondary concrete products Secondary concreting for tunnels Features High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for […]

The post EXEN HKM55LFSA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: HKM55LFSA

Powerful transmission of vibration by single-touch fixing

This product is used for the following applications:

  • Manufacturing of secondary concrete products
  • Secondary concreting for tunnels

  • Features

    High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for not only in box culverts and concrete segments but L-shaped retaining walls, PC plates, and other large concrete products as well. These are also applicable to pouring a secondary layer for tunnels, subway works, shield works, and other projects.

    Transmitting powerful vibration by single-touch fixing

    Fixed with a single bolt that is easy to detach and reattach, these machines transmit vibration stably and pour concrete in a resonance-free and silent manner.

    (1) Insert the hook of the vibration motor into the hook base assembly fixed in a mold or something similar.
    (2) Lift the motor by using the hook as the support.
    (3) Let the motor-fixing bolt into the bolt ditch and fasten the flange nut with a ratchet.

    High-frequency vibration motors / hook base type HKM series

    Hermetic structure

    Highly airtight, these machines can provide steam curing as installed on a mold. They prevent a decline in insulation and increase ease of operation.

    Adjusting centrifugal force achieves silent concreting

    The weights (fanlike eccentric weights) installed on both sides of the vibration motor can be adjusted in angle to adjust centrifugal force.
    With simple adjustment and a high-frequency inverter, these units produce a centrifugal force that matches the input of freshly mixed concrete, achieving silent concreting.

    High-frequency vibration motors / hook base type HKM series

    Using an inverter converts frequency

    Equipped with a series of high-frequency inverters (with volume control), these products can be set to a desired frequency setting according to the product dimensions and mold shape.
    Setting the high-frequency vibration motor to a desired frequency and a desired centrifugal force provides different vibrations for concreting and finishing, and provides silent concreting that avoids resonance with molds.

    A sharable hook base

    The mounting hook base is shared for HKM55LFA (SA) and HKM75LFA (SA).
    When you need to move molds or vary vibration in a factory, you can install the same hook base for them.

    Specification

    HKM-LFA(SA)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (kN)    		 Weight
    (kg)
    HKM55LFA 550 48 12.5 No 50～120 8.8 16.5
    HKM55LFSA Yes 17.5
    HKM75LFA 750 17.0 No 11.6 21.3
    HKM75LFSA Yes 22.3

    (Imperial System)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (lbf)    		 Weight
    (lb)
    HKM55LFA 550 48 12.5 No 50～120 1978 36.4
    HKM55LFSA Yes 38.6
    HKM75LFA 750 17.0 No 2608 46.9
    HKM75LFSA Yes 49.1

    *Product masses include that of the cable (1.7Kg) and the intermediate switches (0.9Kg).

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model H L W
    HKM55LFA 240 218 213
    HKM55LFSA
    HKM75LFA 305 213 218
    HKM75LFSA

    (Imperial System)

    Model H L W
    HKM55LFA 8.4 9.4 8.6
    HKM55LFSA
    HKM75LFA 8.6 1’0″ 8.4
    HKM75LFSA

    Product dimensional drawings

The post EXEN HKM55LFSA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN HKM55LFA High-frequency Vibration Motors https://koueitrading.com/global/product/exen-hkm55lfa-high-frequency-vibration-motors/ Thu, 10 Dec 2020 04:16:31 +0000 https://koueitrading.com/global/?post_type=product&p=23306 Products Made In Japan Manufacturer: EXEN Model: HKM55LFA Powerful transmission of vibration by single-touch fixing This product is used for the following applications: Manufacturing of secondary concrete products Secondary concreting for tunnels Features High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for […]

The post EXEN HKM55LFA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: HKM55LFA

Powerful transmission of vibration by single-touch fixing

This product is used for the following applications:

  • Manufacturing of secondary concrete products
  • Secondary concreting for tunnels

  • Features

    High-frequency vibration motors, although small and lightweight, produce powerful vibration at high rpm rates and display their full performance in concreting for not only in box culverts and concrete segments but L-shaped retaining walls, PC plates, and other large concrete products as well. These are also applicable to pouring a secondary layer for tunnels, subway works, shield works, and other projects.

    Transmitting powerful vibration by single-touch fixing

    Fixed with a single bolt that is easy to detach and reattach, these machines transmit vibration stably and pour concrete in a resonance-free and silent manner.

    (1) Insert the hook of the vibration motor into the hook base assembly fixed in a mold or something similar.
    (2) Lift the motor by using the hook as the support.
    (3) Let the motor-fixing bolt into the bolt ditch and fasten the flange nut with a ratchet.

    High-frequency vibration motors / hook base type HKM series

    Hermetic structure

    Highly airtight, these machines can provide steam curing as installed on a mold. They prevent a decline in insulation and increase ease of operation.

    Adjusting centrifugal force achieves silent concreting

    The weights (fanlike eccentric weights) installed on both sides of the vibration motor can be adjusted in angle to adjust centrifugal force.
    With simple adjustment and a high-frequency inverter, these units produce a centrifugal force that matches the input of freshly mixed concrete, achieving silent concreting.

    High-frequency vibration motors / hook base type HKM series

    Using an inverter converts frequency

    Equipped with a series of high-frequency inverters (with volume control), these products can be set to a desired frequency setting according to the product dimensions and mold shape.
    Setting the high-frequency vibration motor to a desired frequency and a desired centrifugal force provides different vibrations for concreting and finishing, and provides silent concreting that avoids resonance with molds.

    A sharable hook base

    The mounting hook base is shared for HKM55LFA (SA) and HKM75LFA (SA).
    When you need to move molds or vary vibration in a factory, you can install the same hook base for them.

    Specification

    HKM-LFA(SA)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (kN)    		 Weight
    (kg)
    HKM55LFA 550 48 12.5 No 50～120 8.8 16.5
    HKM55LFSA Yes 17.5
    HKM75LFA 750 17.0 No 11.6 21.3
    HKM75LFSA Yes 22.3

    (Imperial System)

    Model Input
    (W)    		 Voltage
    (V)    		 Current
    (A)    		 Cord switch Frequency
    （Hz)    		 Centifugal force
    (lbf)    		 Weight
    (lb)
    HKM55LFA 550 48 12.5 No 50～120 1978 36.4
    HKM55LFSA Yes 38.6
    HKM75LFA 750 17.0 No 2608 46.9
    HKM75LFSA Yes 49.1

    *Product masses include that of the cable (1.7Kg) and the intermediate switches (0.9Kg).

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model H L W
    HKM55LFA 240 218 213
    HKM55LFSA
    HKM75LFA 305 213 218
    HKM75LFSA

    (Imperial System)

    Model H L W
    HKM55LFA 8.4 9.4 8.6
    HKM55LFSA
    HKM75LFA 8.6 1’0″ 8.4
    HKM75LFSA

    Product dimensional drawings

The post EXEN HKM55LFA High-frequency Vibration Motors first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN Vibration Motor EKM-2P Series (2pole Single-phase 100V) https://koueitrading.com/global/product/vibration-motor-ekm-2p-series-2pole-single-phase-100v/ Wed, 09 Dec 2020 05:37:23 +0000 https://koueitrading.com/global/?post_type=product&p=23063 Products Made In Japan Manufacturer: EXEN Model:EKM1S-2P Water washing OK! Vibration motor in size of canned coffee. Easily-used 100V type This product is used for the following applications: 01.Installation to a small hopper in the food plant, to prevent blockage of raw material 02.Prevention of clogging at the ejection section in food additive conveyance (screw […]

The post EXEN Vibration Motor EKM-2P Series (2pole Single-phase 100V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model:EKM1S-2P

Water washing OK! Vibration motor in size of canned coffee. Easily-used 100V type

This product is used for the following applications:

  • 01.Installation to a small hopper in the food plant, to prevent blockage of raw material
  • 02.Prevention of clogging at the ejection section in food additive conveyance (screw feeder)
  • 03.Used (for arrangement of parts) in the vehicle production line

  • Features

    Water-washable EKM1S-2P type with all stainless steel body for preventing adhesion or clogging in a small container or chute in response to the demand of further miniaturization of vibration motor for food, chemical, and pharmaceutical industries. The product body is 110mm in total length and 1.8kg in weight, the smallest size in the series, which is expected to be applied to a small container in each industry.
    (Installation is possible with two M6 bolts.) Vibration motor generates a centrifugal force vibration by rotation of eccentric weights at both ends of rotor shaft. 2P series are mainly used for mounting directly to the powder container to prevent the adhesion or blockage or to eliminate the clogging by alleviating compaction, or fused as a table vibration equipment for filling. The product has a totally-enclosed drip-proof structure, and can be installed in any direction and angle. It is low in maintenance cost and is of high durability.

    Operable at 100V household power

    With single-phase 100VAC, the product can be installed easily for preventing the blockage in the tank, hopper, and chute for powder, and improving the clogging of product in the production line.

    Vibration motor EKM-2P series (2pole Single-phase 100V) EKM1S-2P type

    Compact and full oil-free

    EKM1S-2P type is a compact, full oil-free, and electric-driven vibration motor. It can be used in various fields as a modern version of energy-saving type because air supply is not required.

    Vibration motor EKM-2P series (2pole Single-phase 100V) EKM1S-2P type

    Stainless steel body excellent in corrosion resistance

    All components of the vibration motor EKM1S-2P type, including body and side cover, are made of stainless steel casting. It is suitable to install a site in food and chemical industries and a site where corrosion resistance is required.

    Water washing is possible

    With the structure with IP code 66 as well as all stainless steel materials, the vibration motor supports water washing complying with sanitary specifications.
    Description of IP code 66
    Having a totally-enclosed drip-proof structure equivalent of IP code 66, the product can be used safely outdoors.
    Display of IP code
    IP (International Protection code) means Ingress Protection of electric equipment and cabinet for solid foreign object and water defined in the IEC standards 529.
    IP6 (first code) 6 (second code)
    The first code 6 means the protection for human body and solid foreign object. The degree of protection is no internal ingress of dust.
    The second code 6 means the protection against ingress of water. The degree of protection is that no harmful influence is exerted from ocean waves or direct jet flow of water from any direction.

    Support for fall prevention wire

    The vibration motor optionally comes with the attaching portion for fall prevention wire to prevent the vibration motor from falling if a mounting bolt is removed or damaged.

    Vibration motor EKM-2P series (2pole Single-phase 100V) EKM1S-2P type

    Usable in wide range of applications

    The vibration motor is generally used for preventing the blockage of powder. Furthermore, it can be installed the equipment that requires vibration in vibration conveyance, vibrational diffusion, and vibration compaction by applying the usage.

    Specification

    EKM1S-2P

    Model Output
    (W)    		 Voltage
    (V)    		 Input
    Frequency
    (Hz)    		 Current
    (A)    		 Frequency
    (Hz)    		 Centrifuga Force
    (kN)    		 Set bolt
    (mm)    		 Weight
    (kg)
    50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
    EKM1S-2P 10 100
    Single phase    		 50/60 0.26 0.21 46.5 56.9 0.05 0.07 6 1.8

    （Imperial System）

    Model Output
    (W)    		 Voltage
    (V)    		 Input
    Frequency
    (Hz)    		 Current
    (A)    		 Frequency
    (VPM)    		 Centrifuga Force
    (lbf)    		 Set bolt
    (Inch)(mm)    		 Weight
    (lb)
    50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
    EKM1S-2P 10 100
    1-phase    		 50/60 0.26 0.21 2790 3414 11.24 15.74 1/4
    6    		 4.0

    *The weight of cable 1M is included.
    *The centrifugal is fixed because the angle of weight cannot be adjusted.
    *Japanese specification only.

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model L1 L2 L ΦC
    EKM1S-2P 61 49 110 9.2

    （Imperial System）

    Model L1 L2 L C
    EKM1S-2P 2-13/32 1-59/64 4-21/64 23/64
The post EXEN Vibration Motor EKM-2P Series (2pole Single-phase 100V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN Vibration Motor EKM-2P Series (2 Pole Single-phase 200V) https://koueitrading.com/global/product/exen-vibration-motor-ekm-2p-series-2pole-single-phase-200v/ Wed, 09 Dec 2020 02:42:36 +0000 https://koueitrading.com/global/?post_type=product&p=23065 Products Made In Japan Manufacturer: EXEN Model: EKM1.1-2P Water washing OK! Vibration motor in size of canned coffee This product is used for the following applications: 01Installation to a small hopper that requires periodic cleaning in the food-processing plant 02Prevention of blockage of recycling raw materials in public bath 03Prevention of adhesion on wall surface […]

The post EXEN Vibration Motor EKM-2P Series (2 Pole Single-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EKM1.1-2P

Water washing OK! Vibration motor in size of canned coffee

This product is used for the following applications:

  • 01Installation to a small hopper that requires periodic cleaning in the food-processing plant
  • 02Prevention of blockage of recycling raw materials in public bath
  • 03Prevention of adhesion on wall surface in the ceramic pigment hopper
  • 04Vibration for amusement (movie)

  • Features

    Water-washable EKM1.1-2P type with all stainless steel body for preventing adhesion or clogging in a small container or chute in response to the demand of further miniaturization of vibration motor for food, chemical, and pharmaceutical industries. The product body is 128mm in total length and 2.0kg in weight, the smallest size in the series, which is expected to be applied to a small container in each industry.
    (Installation is possible with two M6 bolts.) Vibration motor generates a centrifugal force vibration by rotation of eccentric weights at both ends of rotor shaft. 2P series are mainly used for mounting directly to the powder container to prevent the adhesion or blockage or to eliminate the clogging by alleviating compaction, or fused as a table vibration equipment for filling. EKM1.1-2P of three-phase and 200V is a vibration motor that can be used in wide applications by, for example, combining it with inverter to select the appropriate vibration for workpiece.

    Compact and full oil-free

    EKM1.1-2P type is a compact, full oil-free, and electric-driven vibration motor. It can be used in various fields as a modern version of energy-saving type because air supply is not required.

    Vibration motor EKM-2P series (2pole Three-phase 200V) EKM1.1-2P type

    Stainless steel body excellent in corrosion resistance

    All components of the vibration motor EKM1.1-2P type, including body and side cover, are made of stainless steel casting. It is suitable to install a site in food and chemical industries and a site where corrosion resistance is required.

    Water washing is possible

    With the structure with IP code 66 as well as all stainless steel materials, the vibration motor supports water washing complying with sanitary specifications.
    Description of IP code 66
    Having a totally-enclosed drip-proof structure equivalent of IP code 66, the product can be used safely outdoors.
    Display of IP code
    IP (International Protection code) means Ingress Protection of electric equipment and cabinet for solid foreign object and water defined in the IEC standards 529.
    IP6 (first code) 6 (second code)
    The first code 6 means the protection for human body and solid foreign object. The degree of protection is no internal ingress of dust.
    The second code 6 means the protection against ingress of water. The degree of protection is that no harmful influence is exerted from ocean waves or direct jet flow of water from any direction.

    Reduction in size and weight providing wide range of applications

    EKM1.1-2P type is a product in wider range of applications on your idea. Because its compact body can be installed with two bolts, EKM1.1-2P can be installed to a small powder container, and a chute section or a small area that never been able to be installed, which prevents the blockage at every corners of facilities

    Vibration motor EKM-2P series (2pole Three-phase 200V) EKM1.1-2P type

    Support for fall prevention wire

    The vibration motor optionally comes with the attaching portion for fall prevention wire to prevent the vibration motor from falling if a mounting bolt is removed or damaged.

    Vibration motor EKM-2P series (2pole Three-phase 200V) EKM1.1-2P type

    Adjustable frequency

    The frequency can be adjusted by using the general-purpose inverter of three-phase 200V output. Set an appropriate frequency depending on the application and purpose of vibration.

    Usable in wide range of applications

    The vibration motor is generally used for preventing the blockage of powder. Furthermore, it can be installed the equipment that requires vibration in vibration conveyance, vibrational diffusion, and vibration compaction by applying the usage.

    Specification

    Model Output
    (W)    		 Voltage
    (V)    		 Input
    Frequency
    (Hz)    		 Current
    (A)    		 Frequency
    (Hz)    		 Centrifuga Force
    (kN)    		 Set bolt
    (mm)    		 Weight
    (kg)
    50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
    EKM1.1-2P 11 200
    3-phases    		 50/60 0.12 0.11 46.5 56.7 0.07 0.11 6 2.0

    （Imperial System）

    Model Output
    (W)    		 Voltage
    (V)    		 Input
    Frequency
    (Hz)    		 Current
    (A)    		 Frequency
    (VPM)    		 Centrifuga Force
    (lbf)    		 Set bolt
    (Inch)
    (mm)    		 Weight
    (lb)
    50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
    EKM1.1-2P 11 200
    3-phases    		 50/60 0.12 0.11 2790 3402 15.74 24.73 1/4
    6    		 4.4

    *The weight of cable 1M is included.
    *The centrifugal is fixed because the angle of weight cannot be adjusted.
    *Japanese specification only.

    Dimensions, installation, control panel

    Product dimensional drawings

    Product dimensional table

    Model L1 L2 L φC
    EKM1.1-2P 70 58 128 9.9

    （Imperial System）

    Model L1 L2 L φC
    EKM1.1-2P 2-3/4 2-9/32 5-3/64 25/64
The post EXEN Vibration Motor EKM-2P Series (2 Pole Single-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVUR 10-Series Vibration Motor (6-pole 3-phase 200V) https://koueitrading.com/global/product/exen-evur-series-vibration-motor-6-pole-3-phase-200v/ Wed, 09 Dec 2020 00:40:26 +0000 https://koueitrading.com/global/?post_type=product&p=23032 Products Made In Japan Manufacturer: EXEN Model: EVUR 10-Series   A new model of 6-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens.   Features   It is widely used for transportation and sorting equipment by utilizing strong vibration.   Ideal as a drive source […]

The post EXEN EVUR 10-Series Vibration Motor (6-pole 3-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVUR 10-Series

 

A new model of 6-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens.

 

Features

 

It is widely used for transportation and sorting equipment by utilizing strong vibration.

 

Ideal as a drive source for various vibration devices

This motor has a large amplitude and is suitable as a drive source for transportation and sorting equipment.

 

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

 

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced. EVSI 10-310 – EVSI 10-550

 

Dimensions, installation, control panel

 

 

 

Specification

 

Model Output
（W）		 Voltage
（V）		 Input Frequency
（Hz）		 Current(A） Frequency（Hz） Centrifugal Force
（kN）		 Cable Length
(m)		 Weight
（kg）
50Hz 60Hz 50Hz 60Hz
EVSI 10-310 220 200 50/60 1.50 1.37 15.5 18.7 3.15 2 27.0
EVSI 10-550 240 1.62 1.42 14.5 18.4 5.02 33.0
EVSI 10-1110 550 3.65 3.89 14.8 17.6 11.1 56.0
EVUR 10-1110 4.30 3.60 14.3 18.0 64.0
EVUR 10-1400 690 4.90 4.50 13.6 16.9 14.0 78.0
EVUR 10-1610 830 5.02 4.20 15.4 18.8 16.1 N/A 93.0
EVUR 10-2610 1590 8.70 7.75 16.0 19.3 25.5 130
EVUR 10-3810 1930 13.7 10.4 15.7 37.5 188
EVUR 10-4700 2600 18.8 17.0 15.5 18.6 46.1 204
EVUR 10-5200 2890 15.8 14.8 15.7 18.7 51.1 238
EVSI 10-6600 4150 23.0 17.5 16.2 19.5 66.7 285
EVSI 10-10000 6300 27.0 25.5 16.6 20.0 95.1 381
EVSI 10-11200 109 405
EVSI 10-15000 9000 400 19.0 18.1 139 643
EVSI 10-17500 11000 24.5 23.3 170 705

*Over 750 W vibration motor does not include a cable.

 

Product dimensional table

Model E F G C H L N M P φd
EVUR 10-1110 240 140 22 116 246 568 200 300 4 26
EVUR10-1400
EVUR 10-1610 260 150 132.5 271 617 210 320
EVUR 10-2610 310 170 28 155 329 666 240 380 33
EVUR 10-3810 350 220 33 166 361 734 300 430 38
EVUR 10-4700 796

The post EXEN EVUR 10-Series Vibration Motor (6-pole 3-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSI Series Vibration Motor (6-pole 3-phase 200V) https://koueitrading.com/global/product/exen-evsi-series-vibration-motor-6-pole-3-phase-200v/ Tue, 08 Dec 2020 23:21:22 +0000 https://koueitrading.com/global/?post_type=product&p=23024 Products Made In Japan Manufacturer: EXEN Model: EVSI 10-Series A new model of 6-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens. Features It is widely used for transportation and sorting equipment by utilizing strong vibration. Ideal as a drive source for various vibration devices […]

The post EXEN EVSI Series Vibration Motor (6-pole 3-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSI 10-Series

A new model of 6-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens.

Features

It is widely used for transportation and sorting equipment by utilizing strong vibration.

Ideal as a drive source for various vibration devices

This motor has a large amplitude and is suitable as a drive source for transportation and sorting equipment.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced. EVSI 10-310 – EVSI 10-550

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz （kN）
EVSI 10-310 220 200 50/60 1.5 1.37 15.5 18.7 3.15
EVSI 10-550 240 1.62 1.42 14.5 18.4 5.02
EVSI 10-1110 550 3.65 3.89 14.8 17.6 11.1
EVUR 10-1110 4.3 3.6 14.3 18
EVUR 10-1400 690 4.9 4.5 13.6 16.9 14
EVUR 10-1610 830 5.02 4.2 15.4 18.8 16.1
EVUR 10-2610 1590 8.7 7.75 16 19.3 25.5
EVUR 10-3810 1930 13.7 10.4 15.7 37.5
EVUR 10-4700 2600 18.8 17 15.5 18.6 46.1
EVUR 10-5200 2890 15.8 14.8 15.7 18.7 51.1
EVSI 10-6600 4150 23 17.5 16.2 19.5 66.7
EVSI 10-10000 6300 27 25.5 16.6 20 95.1
EVSI 10-11200 109
EVSI 10-15000 9000 400 19 18.1 139
EVSI 10-17500 11000 24.5 23.3 170
Model Cable Length Weight
(m) （kg）
EVSI 10-310 2 27
EVSI 10-550 33
EVSI 10-1110 56
EVUR 10-1110 64
EVUR 10-1400 78
EVUR 10-1610 N/A 93
EVUR 10-2610 130
EVUR 10-3810 188
EVUR 10-4700 204
EVUR 10-5200 238
EVSI 10-6600 285
EVSI 10-10000 381
EVSI 10-11200 405
EVSI 10-15000 643
EVSI 10-17500 705

*Over 750 W vibration motor does not include a cable.

Dimensions, installation, control panel

Product dimensional table

Model E F G C H L N M P φd
EVSI 10-550 170 120 42 104.5 224 435 162 205 4 17
EVSI 10-1110 190 140 45 116 244 574 190 230
EVSI 10-6600 380 125 35 215 437 750 320 460 6 39
EVSI 10-10000 862
EVSI 10-11200 912
EVSI 10-15000 480 140 41 268 526 960 510 570 8 45
EVSI 10-17500 1040

The post EXEN EVSI Series Vibration Motor (6-pole 3-phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN Vibration Motor EVUR-075 Series (8-Pole 3-Phase 200V) https://koueitrading.com/global/product/exen-vibration-motor-evur-075-series-8-pole-3-phase-200v/ Tue, 08 Dec 2020 01:53:42 +0000 https://koueitrading.com/global/?post_type=product&p=23040 Products Made In Japan Manufacturer: EXEN Model: EVSI-075 Series A new model of 8-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens. Features It is widely used for transportation and sorting equipment by utilizing strong vibration. Ideal as a drive source for various vibration devices […]

The post EXEN Vibration Motor EVUR-075 Series (8-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSI-075 Series

A new model of 8-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens.

Features

It is widely used for transportation and sorting equipment by utilizing strong vibration.

Ideal as a drive source for various vibration devices

This motor has a large amplitude and is suitable as a drive source for transportation and sorting equipment.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz （kN）
EVUR 075-2110 1060 200 50/60 8.2 8.17 12.1 14.5 14.4
EVUR 075-3110 1460 10.8 10.3 12 21.1
EVUR 075-5300 2960 19 16.3 11.6 14 36
EVSI 075-10000 5300 26.4 25.2 12.5 15 76.4
EVSI 075-12000 5700 28 27.4 85.2
EVSI 075-14000 7640 400 21 19.9 111
EVSI 075-17000 8940 22 20.9 132
EVSI 075-22000 11000 26.5 25.2 177
EVSI 075-30000 17000 34 32.4 207
Model Cable Length Weight
(m) （kg）
EVUR 075-2110 N/A 130
EVUR 075-3110 188
EVUR 075-5300 268
EVSI 075-10000 438
EVSI 075-12000 540
EVSI 075-14000 702
EVSI 075-17000 755
EVSI 075-22000 1015
EVSI 075-30000 1125

*Over 750 W vibration motor does not include a cable.

Dimensions, installation, control panel

Product dimensional table

Model E F G C H L N M P φd
EVUR 075-2110 310 170 28 155 329 666 240 380 4 33
EVUR 075-3110 350 220 33 166 361 734 300 430 38

The post EXEN Vibration Motor EVUR-075 Series (8-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN Vibration Motor EVSI-075 Series (8-Pole 3-Phase 200V) https://koueitrading.com/global/product/exen-vibration-motor-evsi-075-series-8-pole-3-phase-200v/ Tue, 08 Dec 2020 01:46:11 +0000 https://koueitrading.com/global/?post_type=product&p=23035 Products Made In Japan Manufacturer: EXEN Model: EVSI-075 Series A new model of 8-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens. Features It is widely used for transportation and sorting equipment by utilizing strong vibration. Ideal as a drive source for various vibration devices […]

The post EXEN Vibration Motor EVSI-075 Series (8-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSI-075 Series

A new model of 8-pole vibration motor that can be used in a wide range of applications from vibration feeders to vibration screens.

Features

It is widely used for transportation and sorting equipment by utilizing strong vibration.

Ideal as a drive source for various vibration devices

This motor has a large amplitude and is suitable as a drive source for transportation and sorting equipment.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz （kN）
EVUR 075-2110 1060 200 50/60 8.2 8.17 12.1 14.5 14.4
EVUR 075-3110 1460 10.8 10.3 12 21.1
EVUR 075-5300 2960 19 16.3 11.6 14 36
EVSI 075-10000 5300 26.4 25.2 12.5 15 76.4
EVSI 075-12000 5700 28 27.4 85.2
EVSI 075-14000 7640 400 21 19.9 111
EVSI 075-17000 8940 22 20.9 132
EVSI 075-22000 11000 26.5 25.2 177
EVSI 075-30000 17000 34 32.4 207
Model Cable Length Weight
(m) （kg）
EVUR 075-2110 N/A 130
EVUR 075-3110 188
EVUR 075-5300 268
EVSI 075-10000 438
EVSI 075-12000 540
EVSI 075-14000 702
EVSI 075-17000 755
EVSI 075-22000 1015
EVSI 075-30000 1125

*Over 750 W vibration motor does not include a cable.

Dimensions, installation, control panel

Product dimensional table

Model E F G C H L N M P φd
EVSI 075-14000 480 140 41 268 526 1040 510 570 8 45
EVSI 075-17000 1120

The post EXEN Vibration Motor EVSI-075 Series (8-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSS 3-500 Vibration Motor Stainless Steel Series https://koueitrading.com/global/product/exen-evss-3-500-vibration-motor-stainless-steel-series/ Mon, 07 Dec 2020 06:39:15 +0000 https://koueitrading.com/global/?post_type=product&p=22864 Products Made In Japan Manufacturer: EXEN Model: EVSS 3-500 Features This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper […]

The post EXEN EVSS 3-500 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSS 3-500

Features

This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

All metal parts on the outer surface are made of stainless steel.

The outer surface is made of stainless steel, which is most suitable for environments where rust due to water or steam is generated and for sites where corrosion should be prevented.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSS 3-100 – EVSS 3-500

*1 Order made product. For the lead time, please contact.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EVSS 3-100 130 200 50/60 0.7 0.67 48.2 57.2 1.19 1.71
EVSS 3-200 47.2 56.8 2.07 1.97
EVSS 3-300 180 1.2 1.14 48.5 58.1 2.98 2.75
EVSS 3-500 330 1.6 1.51 47.5 55.4 4.93 4.69
Model Cable Length Weight
(m) （kg）
EVSS 3-100 2 8.4
EVSS 3-200 8.9
EVSS 3-300 13.1
EVSS 3-500 16.5

*Over 750 W vibration motor total weight does not include cable weight.

Dimensions, installation, control panel

The post EXEN EVSS 3-500 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSI 15-80 Vibration Motor (4-Pole 3-Phase 200V) https://koueitrading.com/global/product/exen-evsi-15-80-vibration-motor-4-pole-3-phase-200v/ Mon, 07 Dec 2020 06:14:27 +0000 https://koueitrading.com/global/?post_type=product&p=22829 Products Made In Japan Manufacturer: EXEN Model: EVSI 15-80 Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EVSI 15-80 Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSI 15-80

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EVSI 15-80 35 200 50/60 0.42 0.4 20.8 27.2 0.76 0.7
Model Cable Length Weight
（kg）
EVSI 15-80 2m 6.6

Dimensions, installation, control panel

The post EXEN EVSI 15-80 Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN KM10S-2PD Vibration Motor DC24V / AC100V https://koueitrading.com/global/product/exen-km10s-2pd-vibration-motor-dc24v-ac100v/ Mon, 07 Dec 2020 05:40:37 +0000 https://koueitrading.com/global/?post_type=product&p=22827 Products Made In Japan Manufacturer: EXEN Model: KM10S-2PD Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Vibration motor operates with DC 24V or single-phase AC 100V Allows operation with a single-phase AC100V or DC24V battery in an environment […]

The post EXEN KM10S-2PD Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: KM10S-2PD

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Vibration motor operates with DC 24V or single-phase AC 100V

Allows operation with a single-phase AC100V or DC24V battery in an environment where commercial power (3-phase AC200V) cannot be used.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Output Voltage Input Frequency Current(Ａ) Frequency（Hz） Centrifugal Force（kN） Condenser
（Ｗ） （Ｖ） (Hz) 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz (μF)
KM3S-2PD 30 100 50/60 0.6 0.85 47.9 56.8 0.5 0.72 6.5
KM10S-2PD 100 1.5 1.7 46.4 55.8 1.1 1.58 12
Model Cable Length Weight
(m) （kg）
KM3S-2PD 2 5.3
KM10S-2PD 10

Dimensions, installation, control panel

The post EXEN KM10S-2PD Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSS 3-300 Vibration Motor Stainless Steel Series https://koueitrading.com/global/product/exen-evss-3-300-vibration-motor-stainless-steel-series/ Mon, 07 Dec 2020 05:37:14 +0000 https://koueitrading.com/global/?post_type=product&p=22861 Products Made In Japan Manufacturer: EXEN Model: EVSS 3-300 Features This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper […]

The post EXEN EVSS 3-300 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSS 3-300

Features

This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

All metal parts on the outer surface are made of stainless steel.

The outer surface is made of stainless steel, which is most suitable for environments where rust due to water or steam is generated and for sites where corrosion should be prevented.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSS 3-100 – EVSS 3-500

*1 Order made product. For the lead time, please contact.

Specification

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EVSS 3-100 130 200 50/60 0.7 0.67 48.2 57.2 1.19 1.71
EVSS 3-200 47.2 56.8 2.07 1.97
EVSS 3-300 180 1.2 1.14 48.5 58.1 2.98 2.75
EVSS 3-500 330 1.6 1.51 47.5 55.4 4.93 4.69
Model Cable Length Weight
(m) （kg）
EVSS 3-100 2 8.4
EVSS 3-200 8.9
EVSS 3-300 13.1
EVSS 3-500 16.5

*Over 750 W vibration motor total weight does not include cable weight.

Dimensions, installation, control panel

The post EXEN EVSS 3-300 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSS 3-200 Vibration Motor Stainless Steel Series https://koueitrading.com/global/product/exen-evss-3-200-vibration-motor-stainless-steel-series/ Mon, 07 Dec 2020 05:35:56 +0000 https://koueitrading.com/global/?post_type=product&p=22859 Products Made In Japan Manufacturer: EXEN Model: EVSS 3-200 Features This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper […]

The post EXEN EVSS 3-200 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSS 3-200

Features

This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

All metal parts on the outer surface are made of stainless steel.

The outer surface is made of stainless steel, which is most suitable for environments where rust due to water or steam is generated and for sites where corrosion should be prevented.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSS 3-100 – EVSS 3-500

*1 Order made product. For the lead time, please contact.

Specification

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EVSS 3-100 130 200 50/60 0.7 0.67 48.2 57.2 1.19 1.71
EVSS 3-200 47.2 56.8 2.07 1.97
EVSS 3-300 180 1.2 1.14 48.5 58.1 2.98 2.75
EVSS 3-500 330 1.6 1.51 47.5 55.4 4.93 4.69
Model Cable Length Weight
(m) （kg）
EVSS 3-100 2 8.4
EVSS 3-200 8.9
EVSS 3-300 13.1
EVSS 3-500 16.5

*Over 750 W vibration motor total weight does not include cable weight.

Dimensions, installation, control panel

The post EXEN EVSS 3-200 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSS 3-100 Vibration Motor Stainless Steel Series https://koueitrading.com/global/product/exen-evss-3-100-vibration-motor/ Mon, 07 Dec 2020 04:24:28 +0000 https://koueitrading.com/global/?post_type=product&p=22856 Products Made In Japan Manufacturer: EXEN Model: EVSS 3-100 Features This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper […]

The post EXEN EVSS 3-100 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSS 3-100

Features

This vibration motor is ideal for the fields such as food, pharmaceutical and chemical industries where rust and corrosion due to water and steam must be eliminated. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

All metal parts on the outer surface are made of stainless steel.

The outer surface is made of stainless steel, which is most suitable for environments where rust due to water or steam is generated and for sites where corrosion should be prevented.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSS 3-100 – EVSS 3-500

*1 Order made product. For the lead time, please contact.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EVSS 3-100 130 200 50/60 0.7 0.67 48.2 57.2 1.19 1.71
EVSS 3-200 47.2 56.8 2.07 1.97
EVSS 3-300 180 1.2 1.14 48.5 58.1 2.98 2.75
EVSS 3-500 330 1.6 1.51 47.5 55.4 4.93 4.69
Model Cable Length Weight
(m) （kg）
EVSS 3-100 2 8.4
EVSS 3-200 8.9
EVSS 3-300 13.1
EVSS 3-500 16.5

*Over 750 W vibration motor total weight does not include cable weight.

Dimensions, installation, control panel

The post EXEN EVSS 3-100 Vibration Motor Stainless Steel Series first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSI Series Vibration Motor (4-Pole 3-Phase 200V) https://koueitrading.com/global/product/exen-evsi-series-vibration-motor-4-pole-3-phase-200v/ Mon, 07 Dec 2020 03:14:34 +0000 https://koueitrading.com/global/?post_type=product&p=22850 Products Made In Japan Manufacturer: EXEN Model: EVSI Series Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EVSI Series Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSI Series

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz （kN）
EVSI 15-200 90 200 50/60 0.93 0.8 22.3 26.9 2.09
EVSI 15-400 220 1.25 1.26 22.7 27 4.04
EVSI 15-550 1.54 1.42 21.4 26 5.42
EVSI 15-700 380 1.93 2.3 22.4 25.4 7.06
EVSI 15-900 2.68 2.37 20.2 24.8 8.83
EVSI 15-1100 400 2.37 2.09 22.7 27.7 10.3
EVSI 15-1410 740 3.5 2.76 22.7 28.1 13.9
EVUR 15-1410 2.9 2.89 23.1 27.5
EVSI 15-1710 830 4.08 4.65 27.3 17.6
EVUR 15-1710 4.8 23.2 27.7
EVUR 15-2410 1340 7.86 7.1 23.8 28.7 23.7
EVUR 15-3810 1780 10.6 9.7 23.9 28.8 37.7
EVUR 15-5010 2950 12 11.5 25 30 49.1
EVUR 15-7000 4980 23.2 21.2 23.9 28.7 64.1
EVSI 15-9500 6000 24.4 24.1 25 30 82.6
EVSI 15-11500 8600 400 17.5 16.7 25 30 112
Model Cable Length Weight
（kg）
EVSI 15-200 2m 12.1
EVSI 15-400 19.5
EVSI 15-550 21.2
EVSI 15-700 26.7
EVSI 15-900 29.5
EVSI 15-1100 33.5
EVSI 15-1410 42
EVUR 15-1410 53
EVSI 15-1710 N/A 48
EVUR 15-1710 57
EVUR 15-2410 81
EVUR 15-3810 119
EVUR 15-5010 161
EVUR 15-7000 208
EVSI 15-9500 317
EVSI 15-11500 433

*Over 750 W vibration motor does not include a cable.

Dimensions, installation, control panel

Model E F G C H L N M P φd
EVSI 15-400 140 105 30 82.5 203 344 146 167 4 13
EVSI 15-550 386
EVSI 15-700 170 120 45 93.5 211 394 160 205 17
EVSI 15-900
EVSI 15-1100 42 104.5 224 435 162
EVSI 15-1410 190 140 45 116 448 190 230
The post EXEN EVSI Series Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVUR Series Vibration Motor (4-Pole 3-Phase 200V) https://koueitrading.com/global/product/exen-evur-series-vibration-motor-4-pole-3-phase-200v/ Mon, 07 Dec 2020 02:17:57 +0000 https://koueitrading.com/global/?post_type=product&p=22853 Products Made In Japan Manufacturer: EXEN Model: EVUR Series Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EVUR Series Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVUR Series

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz （kN）
EVSI 15-200 90 200 50/60 0.93 0.8 22.3 26.9 2.09
EVSI 15-400 220 1.25 1.26 22.7 27 4.04
EVSI 15-550 1.54 1.42 21.4 26 5.42
EVSI 15-700 380 1.93 2.3 22.4 25.4 7.06
EVSI 15-900 2.68 2.37 20.2 24.8 8.83
EVSI 15-1100 400 2.37 2.09 22.7 27.7 10.3
EVSI 15-1410 740 3.5 2.76 22.7 28.1 13.9
EVUR 15-1410 2.9 2.89 23.1 27.5
EVSI 15-1710 830 4.08 4.65 27.3 17.6
EVUR 15-1710 4.8 23.2 27.7
EVUR 15-2410 1340 7.86 7.1 23.8 28.7 23.7
EVUR 15-3810 1780 10.6 9.7 23.9 28.8 37.7
EVUR 15-5010 2950 12 11.5 25 30 49.1
EVUR 15-7000 4980 23.2 21.2 23.9 28.7 64.1
EVSI 15-9500 6000 24.4 24.1 25 30 82.6
EVSI 15-11500 8600 400 17.5 16.7 25 30 112
Model Cable Length Weight
（kg）
EVSI 15-200 2m 12.1
EVSI 15-400 19.5
EVSI 15-550 21.2
EVSI 15-700 26.7
EVSI 15-900 29.5
EVSI 15-1100 33.5
EVSI 15-1410 42
EVUR 15-1410 53
EVSI 15-1710 N/A 48
EVUR 15-1710 57
EVUR 15-2410 81
EVUR 15-3810 119
EVUR 15-5010 161
EVUR 15-7000 208
EVSI 15-9500 317
EVSI 15-11500 433

*Over 750 W vibration motor does not include a cable.

Dimensions, installation, control panel

Model E F G C H L N M P φd
EVUR 15-2410 260 150 22 132.5 271 537 210 320 4 26
EVUR 15-3810 310 170 28 155 329 584 240 380 33
EVUR 15-5010 350 220 33 166 361 630 300 430 38

The post EXEN EVUR Series Vibration Motor (4-Pole 3-Phase 200V) first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVCC 3-200 Vibration Motor DC24V / AC100V https://koueitrading.com/global/product/exen-evcc-3-200-vibration-motor-dc24v-ac100v/ Mon, 07 Dec 2020 02:14:23 +0000 https://koueitrading.com/global/?post_type=product&p=22819 Products Made In Japan Manufacturer: EXEN Model: EVCC 3-200 Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Vibration motor operates with DC 24V or single-phase AC 100V Allows operation with a single-phase AC100V or DC24V battery in an […]

The post EXEN EVCC 3-200 Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVCC 3-200

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Vibration motor operates with DC 24V or single-phase AC 100V

Allows operation with a single-phase AC100V or DC24V battery in an environment where commercial power (3-phase AC200V) cannot be used.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Voltage
(V）		 Output
（W）		 Current
(A）		 Input Frequency
（Hz）		 Centrifugal Force
（kN）		 Cable Length
(m)		 Weight
(kg）
EVCC 3-100 DC24 116 4.0 50 1.19 2 6.1
EVCC 3-200 116 2.07 6.3

*This product has polarity. Connect the brown wire to the plus (+) side.
*This product takes about 5 seconds from turning on the power to starting operation.

Dimensions, installation, control panel

 

 

 

The post EXEN EVCC 3-200 Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN KM3S-2PD Vibration Motor DC24V / AC100V https://koueitrading.com/global/product/exen-km3s-2pd-vibration-motor-dc24v-ac100v/ Mon, 07 Dec 2020 00:50:23 +0000 https://koueitrading.com/global/?post_type=product&p=22824 Products Made In Japan Manufacturer: EXEN Model: KM3S-2PD Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Vibration motor operates with DC 24V or single-phase AC 100V Allows operation with a single-phase AC100V or DC24V battery in an environment […]

The post EXEN KM3S-2PD Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: KM3S-2PD

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Vibration motor operates with DC 24V or single-phase AC 100V

Allows operation with a single-phase AC100V or DC24V battery in an environment where commercial power (3-phase AC200V) cannot be used.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Output Voltage Input Frequency Current(Ａ) Frequency（Hz） Centrifugal Force（kN） Condenser
（Ｗ） （Ｖ） (Hz) 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz (μF)
KM3S-2PD 30 100 50/60 0.6 0.85 47.9 56.8 0.5 0.72 6.5
KM10S-2PD 100 1.5 1.7 46.4 55.8 1.1 1.58 12
Model Cable Length Weight
(m) （kg）
KM3S-2PD 2 5.3
KM10S-2PD 10

Dimensions, installation, control panel

The post EXEN KM3S-2PD Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EKM1S-2P Vibration Motor DC24V / AC100V https://koueitrading.com/global/product/exen-ekm1s-2p-vibration-motor-dc24v-ac100v/ Mon, 07 Dec 2020 00:15:07 +0000 https://koueitrading.com/global/?post_type=product&p=22821 Products Made In Japan Manufacturer: EXEN Model: EKM1S-2P Features   Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Vibration motor operates with DC 24V or single-phase AC 100V Allows operation with a single-phase AC100V or DC24V battery in an […]

The post EXEN EKM1S-2P Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EKM1S-2P

Features

 

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Vibration motor operates with DC 24V or single-phase AC 100V

Allows operation with a single-phase AC100V or DC24V battery in an environment where commercial power (3-phase AC200V) cannot be used.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

 

Specification

 

Model Output
（W）		 Voltage
（V）		 Input Frequency
（Hz）		 Current
（A）		 Frequency
（Hz）		 Centrifugal Force
（kN）		 Condenser
(μF)		 Cable Length
(m)		 Weight
（kg）
EKM1S-2P 10 1φ 100 50 0.26 46.5 0.05 2.5
（250V）		 1m 1.8
60 0.21 56.9 0.07

*Total weight includes cable weight.
*The centrifugal force is fixed because the eccentric weight angle cannot be adjusted.

Dimensions, installation, control panel

The post EXEN EKM1S-2P Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVCC 3-100 Vibration Motor DC24V / AC100V https://koueitrading.com/global/product/exen-evcc-3-100-vibration-motor-dc24v-ac100v/ Sun, 06 Dec 2020 23:35:17 +0000 https://koueitrading.com/global/?post_type=product&p=22816 Products Made In Japan Manufacturer: EXEN Model: EVCC 3-100 Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Vibration motor operates with DC 24V or single-phase AC 100V Allows operation with a single-phase AC100V or DC24V battery in an […]

The post EXEN EVCC 3-100 Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVCC 3-100

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Vibration motor operates with DC 24V or single-phase AC 100V

Allows operation with a single-phase AC100V or DC24V battery in an environment where commercial power (3-phase AC200V) cannot be used.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.

Specification

Model Voltage
(V）		 Output
（W）		 Current
(A）		 Input Frequency
（Hz）		 Centrifugal Force
（kN）		 Cable Length
(m)		 Weight
(kg）
EVCC 3-100 DC24 116 4.0 50 1.19 2 6.1
EVCC 3-200 116 2.07 6.3

*This product has polarity. Connect the brown wire to the plus (+) side.
*This product takes about 5 seconds from turning on the power to starting operation.

Dimensions, installation, control panel

 

 

 

The post EXEN EVCC 3-100 Vibration Motor DC24V / AC100V first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSS Series Vibration Motor https://koueitrading.com/global/product/exen-evss-series-vibration-motor/ Sat, 05 Dec 2020 02:46:47 +0000 https://koueitrading.com/global/?post_type=product&p=22749 Products Made In Japan Manufacturer: EXEN Model: EVSS 3-100, EVSS 3-200, EVSS 3-300, EVSS 3-500   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of […]

The post EXEN EVSS Series Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EVSS 3-100, EVSS 3-200, EVSS 3-300, EVSS 3-500

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model E F G C H L N M P φd
EVSS 3-300 125 90 14 73 176 255 122 152 4 13
EVSS 3-500 140 105 15 82.5 200 284 137 167

The post EXEN EVSS Series Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EV 3-65 Vibration Motor https://koueitrading.com/global/product/exen-ev-3-65-vibration-motor/ Sat, 05 Dec 2020 02:42:00 +0000 https://koueitrading.com/global/?post_type=product&p=22746 Products Made In Japan Manufacturer: EXEN Model:EV 3-65   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EV 3-65 Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model:EV 3-65

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model Output Voltage Input Frequency Current(A） Frequency（Hz） Centrifugal Force（kN）
（W） （V） （Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
EV 3-65 90 200 50/60 0.54 0.51 49 58.2 0.63 0.91

Cable Length (m): 2

Weight (kg): 4.7

The post EXEN EV 3-65 Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EKM1.1-2P Vibration Motor https://koueitrading.com/global/product/exen-ekm1-1-2p-vibration-motor/ Sat, 05 Dec 2020 02:38:22 +0000 https://koueitrading.com/global/?post_type=product&p=22741 Products Made In Japan Manufacturer: EXEN Model: EKM1.1-2P   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EKM1.1-2P Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EKM1.1-2P

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model Output Voltage Input Frequency Current Frequency Centrifugal Force Condenser
（W） （V） （Hz） （A） （Hz） （kN） (μF)
EKM1.1-2P 11 3φ 200 50 0.12 46.5 0.07 –
60 0.11 56.7 0.11
EKM1S-2P 10 1φ 100 50 0.26 46.5 0.05 2.5
（250V）

Cable Length (m): 2

Weight (kg): 1.8

The post EXEN EKM1.1-2P Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN KM3S-2PD Vibration Motor https://koueitrading.com/global/product/exen-km3s-2pd-vibration-motor/ Sat, 05 Dec 2020 02:28:25 +0000 https://koueitrading.com/global/?post_type=product&p=22733 Products Made In Japan Manufacturer: EXEN Model: KM3S-2PD   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN KM3S-2PD Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: KM3S-2PD

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Cable Length (m): 2

Weight (kg): 5.3

 

The post EXEN KM3S-2PD Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EVSI Series Vibration Motor https://koueitrading.com/global/product/exen-evsi-series-vibration-motor/ Sat, 05 Dec 2020 02:19:24 +0000 https://koueitrading.com/global/?post_type=product&p=22728 Products Made In Japan Manufacturer: EXEN Model:EVSI 3-100, EVSI 3-200, EVSI 3-300, EVSI 3-500, EVSI 3-700, EVSI 3-800, EVSI 3-1100, EVSI 3-1600, EVSI 3-2310, EVSI 3-3200, EVSI 3-4000 Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong […]

The post EXEN EVSI Series Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model:EVSI 3-100, EVSI 3-200, EVSI 3-300, EVSI 3-500, EVSI 3-700, EVSI 3-800, EVSI 3-1100, EVSI 3-1600, EVSI 3-2310, EVSI 3-3200, EVSI 3-4000

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model E F G C H L N M P φd
EVSI 3-500 140 105 30 82.5 203 288 146 167 4 13
EVSI 3-700
EVSI 3-800 170 120 45 93.5 211 308 174 205 17
EVSI 3-1100 42 104.5 224 435 162
EVSI 3-1600 190 140 45 116 244 430 190 230
EVSI 3-2310 49 104 230 465 180
EVSI 3-3200 255 155 91 130 290 560 210 310 25

 

 

The post EXEN EVSI Series Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN KM2.8-2PB Vibration Motor https://koueitrading.com/global/product/exen-km2-8-2pb-vibration-motor/ Sat, 05 Dec 2020 01:30:09 +0000 https://koueitrading.com/global/?post_type=product&p=22738 Products Made In Japan Manufacturer: EXEN Model: KM2.8-2PB   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN KM2.8-2PB Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: KM2.8-2PB

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model Output Voltage Input Current（A） Frequency（Hz） Centrifugal Force
(Ｗ) (V） Frequency （kN）
(Hz） 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
KM2.8-2PB 28 200 50/60 0.25 0.21 45.5 54.4 0.25 0.36

Cable Length (m): 1

Weight (kg): 2.9

The post EXEN KM2.8-2PB Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN EKM1S-2P Vibration Motor https://koueitrading.com/global/product/exen-ekm1s-2p-vibration-motor/ Sat, 05 Dec 2020 00:36:54 +0000 https://koueitrading.com/global/?post_type=product&p=22742 Products Made In Japan Manufacturer: EXEN Model: EKM1S-2P   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN EKM1S-2P Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: EKM1S-2P

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Model Output Voltage Input Frequency Current Frequency Centrifugal Force Condenser
（W） （V） （Hz） （A） （Hz） （kN） (μF)
EKM1S-2P 10 1φ 100 50 0.26 46.5 0.05 2.5
（250V）
Model Cable Length Weight
(m) （kg）
EKM1S-2P 1m 1.8
The post EXEN EKM1S-2P Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> EXEN KM10S-2PD Vibration Motor https://koueitrading.com/global/product/exen-km10s-2pd-vibration-motor/ Sat, 05 Dec 2020 00:23:37 +0000 https://koueitrading.com/global/?post_type=product&p=22734 Products Made In Japan Manufacturer: EXEN Model: KM10S-2PD   Features Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. Generates strong vibration The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes […]

The post EXEN KM10S-2PD Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]> Products Made In Japan
Manufacturer: EXEN
Model: KM10S-2PD

 

Features

Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment.

Generates strong vibration

The rotation of the eccentric weights attached to both ends of the rotor shaft inside the motor causes strong centrifugal vibration. Utilizing strong vibration, it is widely used for eliminating clogging and adhesion inside powder and bulk container (hopper and tank) and for filling equipment. The most suitable one can be selected from various models according to the application.

Designed for water resistant structure

It is possible to use it in an environment where it is exposed to dust or water due to the design of a fully enclosed drip-proof structure with protection class IP66.

Molded stator

By fixing the motor stator to the mold, the risk of wire breakage due to vibration is reduced.EVSI 3-100 – EVSI 3-2310，EVSS 3-100 – EVSS 3-500，EV3-65

Multiple motor mounting holes

By providing multiple mounting holes on the main unit, installation in a narrow space is possible.EVSI 3-100 – EVSI 3-300，EV3-65

Specification

Product dimensional table

Cable Length (m) :2m

Weight: 10.0 kg

The post EXEN KM10S-2PD Vibration Motor first appeared on Kouei Japan Trading | Get Quotation.]]>