KITO | Kouei Japan Trading | Get Quotation

KITO CB Manual Hoists With Hook Suspension

kvtpart — Wed, 12 Mar 2025 06:51:05 +0000

Product Made in Japan
Manufacturer: KITO
Model: CB

Durable and reliable, this ultra-light hoist can be operated with minimum manual power.

Features

Lighter, smaller, and more efficient, these hoists are invaluable for lifting applications.
A high-class load chain with a breaking strength of 1000 N/mm2 (100 kgf/mm2) is key to reliable and safe operation.
The dry-type braking mechanism provides excellent performance.
Shock-resistant gear case and hand wheel cover
Double-pawl spring mechanism for extra reliability

Capacity	0.5 to 50 t
Standard Lift	2.5 m (0.5 to 1.5 t), 3.0 m (2 to 5 t), 3.5 m (7.5 to 50 t)
Operating Temperature	-40 to +60℃

Technical Characteristics

Gearcase and hand wheel cover are resistant to external shocks
Double enclosure to seal out rainwater and dust
Double-pawl spring mechanism for extra reliability
Secure and reliable mechanical brake
Easy-to-use hooks
Bearing mechanism increases mechanical efficiency
Load chain guide mechanism for smoother operation
Highly accurate and durable gears
Stopper prevents excessive lowering
High strength load chain

Specifications

※Major capacities example.

Code	Capacity (t)	Standard Lift (m)	Hand Chain Folded Length (m)	Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight) (kg)
CB005	0.5	2.5	2.5	5.0 × 1	10
CB010	1			6.3 × 1	11.5
CB015	1.5			7.1 × 1	14.5
CB020	2	3.0	3.0	8.0 × 1	20
CB030	3	3.0	3.0	7.1 × 2	24

Other capacities are available upon request.
Any lift of chain is available upon request.
As KITO chains are heat-treated, splicing of the load chain is prohibited.
When ordering, specify the lifting height.
Chain falls vary depending on the capacity of each hoist.

Dimensions (mm)※Major capacities example.

Code	Capacity (t)	Headroom: C	a	b	d
CB005	0.5	285	158	161	2500
CB010	1	295	162	161
CB015	1.5	350	171	182
CB020	2	375	182	202	3000
CB030	3	510	171	235	3100

Options

Overload Protection Device (OLL)

The hoist overload limiter protects the hoist mechanism from damage due to overloading. When the hoist is overloaded, the overload limiter is triggered and the lifting process stops.

Chain Container

In case the load chain on the no-load side hinders work when the load is raised, it can be kept in a chain container attached to the chain hoist. Both steel and canvas chain containers are available upon request.

The post KITO CB Manual Hoists With Hook Suspension first appeared on Kouei Japan Trading | Get Quotation.

KITO LB Lever Block

Admin — Wed, 12 Mar 2025 03:00:09 +0000

Product made in Japan

Manufacturer: KITO

Model: LB

The post KITO LB Lever Block first appeared on Kouei Japan Trading | Get Quotation.

KITO VAN LEUSDEN – Manual Chain Hoist

kvtpart — Mon, 10 May 2021 03:58:00 +0000

Maker: KITO VAN LEUSDEN

Origin: Netherland

500 KG – 50,000 KG LIFTING CAPACITY

The post KITO VAN LEUSDEN – Manual Chain Hoist first appeared on Kouei Japan Trading | Get Quotation.

KITO CX Manual Hoists

kvtpart — Fri, 12 Mar 2021 03:00:53 +0000

Product Made in Japan
Manufacturer: KITO
Model: CX

Ultra-compact hand chain hoists: extremely lightweight and portable

Features

Compact, lightweight and simple design
Integral aluminum body
Easily portable anywhere
Easy and smooth operation with minimal hand-pull force
Wide internal hook diameter expands the applicable range

Capacity	0.25 t, 0.5 t
Standard Lift	2.5 m
Operating Temperature	-40 to +60℃

Technical Characteristics

Integral aluminum body
Easy and smooth operation with minimal hand-pull force
Wide internal hook diameter expands the applicable range. top and bottom hooks
Easily portable anywhere
Nickel-plated super-strong load chain (breaking stress of 1000 n/㎟)
Hand chain
Equipped with overload limiter

Specifications & Dimensions

Specifications

※Major capacities example

Code	Capacity (kg) [t]	Standard Lift (m)	Standard Length of Hand Chain (Folded) (m)	Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight)* (kg)
CX003	250 [0.25]	2.5	2	3.2 × 1	2.4
CX005	500 [0.5]	2.5	2.5	4.3 × 1	4.5

* The Mass (Net Weight) is for the standard lift.

Dimensions (mm)

※Major capacities example

Code	a	b	Headroom: C	Length from the Top Hook: d
CX003	88	84	217	2100
CX005	103	102	260	2600

The post KITO CX Manual Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO ER2 Electric Chain Hoists

kvtpart — Fri, 12 Mar 2021 03:00:42 +0000

Product Made in Japan
Manufacturer: KITO
Model: ER2

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance

Features

Compact body – lightweight
Smooth and ergonomic operation
Reliable safety
Enhanced durability
Easier maintenance
Environmentally friendly

Capacity	125 kg to 20 t
Standard Lift	3 m
Use	Lifting Up/Down
Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)	Classification	M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM); H4 (ASME)
		Motor Insulation	Class B for 220-230V (50/60Hz), 380-440V (60Hz) Class F for 380-415V (50Hz), 380-440V (60Hz)
		Enclosure	Hoist Body – IP55, Push Button Control – IP65
Control Voltage	24V (110V for Specific Regions)	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Duty Rating	Single Speed – 60% ED （60 min.） Dual Speed – 40/20% ED （30/10 min.）	Operating Humidity	85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

360° VIEW

*The model shown may differ from the specifications of your country. Product features vary by market. Some product features may therefore differ from the model shown. Please contact your respective contact person for information specific to your market and country.

Compact Body – Lightweight

The compact aluminum die-cast body features exceptional rigidity and effective protection against dust and water. It has a simple structure and uses minimal parts, while the fine-tuned load-chain profile better exploits the lighter hoist body weight compared to the previous ER.

Smooth and Ergonomic Operation

1. Inverter – Smooth Transitional Speed
The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
* For non-standard speed ratios, please request them when placing order.2. Original Push Button Control
Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.3. Load Sheave-reduced Vibration
Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

1. Long-life Friction Clutch
The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.2. Durable Upper/Lower Limit Switch
The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

1. Thermal Protector
To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.2. Magnetic Brake – Failsafe Brake
KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
>10-year/ 2,000,000 cycle brake warranty
>No adjustment needed
>Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor
Frame Fins and Fan Cover

1. High-end Duty Rating
The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.2. Unique Motor Frame Fins and Fan Cover
A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and
Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

1. Suspension
The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.2. Easy Maintenance Control Panel
Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter
(Inside Inverter for Dual Speed)

This standard feature shows the cumulative hours of hoist operation and the number of lowering starts on the LCD of the CH meter, which allows the user to maintain the unit based on the frequency of use. By maintaining historical CH meter data, the inspection and replacement periods for gear oil, contactors, brakes and load chains can be efficiently controlled; allowing the equipment to be used with confidence.

Environmentally Friendly

1. No Hazardous Substances
Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.2. Energy Saving
Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.3. Low-noise
The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Dual Speed ‘Inverter’ with Hook Suspension

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

*Major capacities example. For more information, please refer to Product Catalog.

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Net Wt. (kg)
			Lifting Motor		50/60Hz
			Output (kW)）		High	Low
ER2-001IH	125kg	3	0.56	Preset	16.6	2.8	27
ER2-001IH	125kg		0.56	Adjustable	16.6	1.4	27
ER2-005IS	500kg		0.9	Preset	8.5	1.4	36
ER2-005IS	500kg		0.9	Adjustable	8.5	0.7	36
ER2-010IS	1		1.8	Preset	8.2	1.4	52
ER2-010IS	1		1.8	Adjustable	8.2	0.7	52
ER2-020IS	2		3.5	Preset	8.2	1.4	89
ER2-020IS	2			Adjustable	8.2	0.7	89
ER2-030IS	3			Preset	5.2	0.9	105
ER2-030IS	3			Adjustable	5.2	0.4	105

*The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

*Major capacities example. For more information, please refer to Product Catalog.

Code	Headroom: C	D	b	d（MFC）	e（MFC）
ER2-001IH	350	430	345	276 (305)	259
ER2-005IS	370	490	348	300 (325)	268
ER2-010IS	430	550	376	316 (332)	307
ER2-020IS	590	630	427	411 (426)	356
ER2-030IS	785	920	427	411 (426)	356

Figures in parentheses are data for mechanical brake with friction clutch.

Dual Speed 500V ‘Pole Change’ with Hook Suspension

The dual speed pole change delivers slowly.

Specifications

*Major capacities example. For more information, please refer to Product Catalog.

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)	Net Weight (kg)
Code	Capacity (t)	Std. Lift (m)	Output (kW)	50Hz	Net Weight (kg)
ER2-001HD	125kg	3	0.5/0.13	14.2/3.5	31
ER2-005SD	500kg		0.9/0.23	7.1/1.8	43
ER2-010SD	1		1.8/0.45	7.2/1.7	58
ER2-020SD	2		3.5/0.88	6.9/1.6	97
ER2-030SD	3		3.5/0.88	4.4/1.0	113

Dimensions (mm)

*Major capacities example. For more information, please refer to Product Catalog.

Code	Headroom: C	D	b（MFC）	d（MFC）	e
ER2-001HD	350	430	321(345)	219(305)	259
ER2-005SD	370	490	348	242(325)	291
ER2-010SD	430	550	376	291(332)	324
ER2-020SD	590	630	427	347(426)	390
ER2-030SD	785	920	427	347(426)	390

Figures in parentheses are data for mechanical brake with friction clutch.

Single Speed with Hook Suspension

The single speed delivers high speed and contributes operation efficiency.

Specifications

*Major capacities example. For more information, please refer to Product Catalog.

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (t)	Std. Lift (m)	Output (kW)	50Hz	60Hz	Net Weight (kg)
ER2-001H	125kg	3	0.56	14.1	16.9	27
ER2-005S	500kg		0.9	7.3	8.8	37
ER2-010S	1		1.8	7.1	8.5	54
ER2-020S	2		3.5	7.0	8.4	91
ER2-030S	3		3.5	4.4	5.3	107

Dimensions (mm)

*Major capacities example. For more information, please refer to Product Catalog.

Code	Headroom: C	D	b(MFC)	d (MFC)	e
ER2-001H	350	430	321 (345)	219 (305)	259
ER2-005S	370	490	348	242 (325)	268
ER2-010S	430	550	376	291 (332)	307
ER2-020S	590	630	427	347 (426)	356
ER2-030S	785	920	427	347 (426)	356

Figures in parentheses are data for mechanical brake with friction clutch.

Large Capacity with Hook Suspension

The large capacity model is suitable for using with the middle and large crane.

Specifications

*Major capacities example. For more information, please refer to Product Catalog

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (t)	Std. Lift (m)	Output (kW)）	50Hz	60Hz	Net Weight (kg)
ER2-100S	10	3	3.5×2	2.9	3.5	303
ER2-150S	15			1.9	2.3	404
ER2-200S	20			1.4	1.7	476

Dimensions (mm)

*Major capacities example. For more information, please refer to Product Catalog.

Code	Headroom: C	D	a	b	w	g
ER2-100S	1370	1210	798	849	956	80
ER2-150S	1595	1520		1022	1129	86
ER2-200S	1710	1600		1198	1305	102

Options

Self-Locking Hook

Flyer

Mechanical Brake with Friction Clutch

This unique KITO device combines the functions of a friction clutch and mechanical brake for capacities of 5 ton or less and requires additional components. (Request this when placing and ordering hoists.)

Overload Limiter

For additional security, an overload limiter (OLL) comes as a recommended option; preset to 115% of rated capacity. The OLL protects the hoist mechanism from damage under overload conditions. (The load can be lowered even after the OLL is triggered.) Adjustable setting: from 90-135% of rated capacity.

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch

Rated Capacity: 125 kg to 5 t (Inverter Only)

Limit Lock Function

1) Upper/Lower Levels Easily Set with Push Button Switches

Function: Capable of setting upper/lower limit stop positions for the bottom hook with the push button switch.
Number of configurable positions: 1 position each at the upper/lower limit
Position detection method: Encoder detection method
Stop control: Automatically decelerate to low-speed operation before a limit position.

2) High Speed in No-load

Function: Automatically increase to 1.5 times faster than high-speed lifting with a load equivalent to about 20% or lower of the rated capacity.
No-load high lifting speed: 1.5 times faster than the rated lifting speed (high speed)
Load detection method: Loading factor detection method (current value)
Response time: Within about 0.3 second (switching from “high lifting speed” to “no-load high lifting speed”)

Stepless Switch

Function: Seamless speed adjustment from high to low depending on how hard the push button is pressed.
Speed range: Up to a speed ratio of 1 (high speed): 1/6 (low speed)
Effective stroke: Approx. 6.5 mm
Detection method: Magnetic field detection by hall element.

The post KITO ER2 Electric Chain Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO High Speed CB

kvt part2 — Fri, 12 Mar 2021 03:00:34 +0000

Product Made in Japan
Manufacturer: KITO
Model: CB

Features

Succeeded in no-load high-speed operation
With originally developed automatic high/low-speed clutch technology, KITO has realized no-load seven times lifting speed.
This gear shows outstanding durability in continuous and long-term use though it is small size.
Operability in a loaded condition is as high as the standard specifications.
Relieved from past stress, a worker can smoothly prepare for his field work.

Specifications & Dimensions

Specifications

Code	Cap. (t)	Chain Pull to Lift Load*1 (N)	Chain O’hauled to Lift Load One Meter (m)		Load Chain Dia. x Chain Fall (mm)	Lifting Changeover Load*2 (t)
Code	Cap. (t)	Low Speed	High Speed	Low Speed	Load Chain Dia. x Chain Fall (mm)	Lifting Changeover Load*2 (t)
CB025	2.5	363	14	99	9.0 × 1	0.25 or less
CB050	5	372	28	198	9.0 × 2	0.5 or less
CB075	7.5	382	42	297	9.0 × 3	0.7 or less
CB100	10	392	56	396	9.0 × 4	0.9 or less
CB150	16	412	85	594	9.0 × 6	1.3 or less
CB200	20	392 × 2	56 × 2	396 × 2	9.0 × 8	1.8 or less
CB300	32	470 × 2	71 × 2	495 × 2	9.0 × 10	2.2 or less
CB400	40	480 × 2	99 × 2	693 × 2	9.0 × 14	2.9 or less
CB500	50	529 × 2	113 × 2	792 × 2	9.0 × 16	3.2 or less

Dimensions

Rated Load (W.L.L) (t)	C	a	b	d	e	f	g	s
2.5	420	237	233	3000	91	143	40	53
5	600		282	3600		194	46.5	63
7.5	770		373	4200		253	72.5	85
10	760		438	4200	111	308	72.5	85
15	1020	313	492	4700	119	337	80	100
20	1180	464	746	4800	232	373	81	110
30	1300	494	746	4800	247	373	103	125
40	1480	592	760	4900	296	380	96	145
50	1560	634	796	4900	317	398	100	165

The post KITO High Speed CB first appeared on Kouei Japan Trading | Get Quotation.

KITO CBSG/CBSP Manual Hoists With Manual Trolley

kvtpart — Fri, 12 Mar 2021 03:00:17 +0000

Product Made in Japan
Manufacturer: KITO
Model: CBSG/CBSP

Durable and reliable, this ultra-light hoist can be operated with minimum manual power.

Features

Lighter, smaller, and more efficient, these hoists are invaluable for lifting applications.
A high-class load chain with a breaking strength of 1000 N/mm² (100 kgf/mm²) is key to reliable and safe operation.
The dry-type braking mechanism provides excellent performance.
Shock-resistant gear case and hand wheel cover
Double-pawl spring mechanism for extra reliability

Capacity	0.5 to 20 t (Geared Type), 0.5 to 5 t (Plain Type)
Standard Lift	2.5 m (0.5 to 1.5 t), 3.0 m (2 to 5 t), 3.5 m (7.5 to 20 t)
Operating Temperature	-20 to +60℃ (With Geared/Plain Trolley)

Technical Characteristics

Gear Case and hand wheel cover are resistant to external shocks
Double enclosure to seal out rainwater and dust
Double-pawl spring mechanism for extra reliability
Secure and reliable mechanical brake
Easy-to-use hooks
Bearing mechanism increases mechanical efficiency
Load chain guide mechanism for smoother operation
Highly accurate and durable gears
Stopper prevents excessive lowering
High strength load chain
Bumpers (protective lugs) for TS series
Wide selection of beam widths
Ultra-light model
More durable track wheels
Special contour wheels
Pivot-mounted
Ball bearings

Specifications & Dimensions

With Geared Trolley

Specifications

※Major capacities example

Code	Cap. (t)	Standard Lift (m)	Flange Width Adjustability (mm)			Mass (Net Weight) (kg)
			Standard	Option
			Standard	W20*	W30*
CBSG005	0.5	2.5	58-127	128-203	204-305	23
CBSG010	1		58-127	128-203	204-305	24
CBSG015	1.5		82-153	–	154-305	32
CBSG020	2	3.0				37
CBSG030	3	3.0				48

CBSG means the CB series connected with the TS series geared trolley.
The data for the standard I-beam width and the minimum radius for a curve is the same data.
15 ton and over capacity trolleys have 8-wheel construction.
30 ton and over capacity versions are available by request.
In case of 7.5 ton and over capacity, trolley wheels for tapered flange are standard. Wheels for flat flanges are available as option. If you prefer wheels for flat flanges, please specify it in advance.
In case of only straight I-beam, 1 ton geared trolley can be used on 73 mm and less width beam and 2.5 and 3 ton geared trolley can be used on 89 mm and less.
* W20 and W30 mean 203 and 305 mm flange width adjustability as option.

Dimensions (mm)

※Major capacities example.

Code	Headroom: C	a’	b	d	f
CBSG005	305	309	236	2500	2300
CBSG010	305	309	236
CBSG015	365	385	280
CBSG020	380	385	280	3000	2800
CBSG030	535	398	324	3100	2800

With Plain Trolley

Specifications

※Major capacities example.

Code	Cap. (t)	Standard Lift (m)	Flange Width Adjustability (mm)			Mass (Net Weight) (kg)
			Standard	Option
			Standard	W20*	W30*
CBSP005	0.5	2.5	50-102	103-203	204-305	15
CBSP010	1		58-127	128-203	204-305	19
CBSP015	1.5		82-153	–	154-305	28
CBSP020	2	3.0				33
CBSP030	3	3.0				44

CBSP means the CB series connected with the TS series plain trolley.
The data for the standard I-beam width and the minimum radius for a curve is the same data.
In case of only straight I-beam, 0.5 ton plain trolley can be used on 57 mm and less width beam and 1 ton plain trolley can be used on 73 mm and less width beam and 2.5 and 3 ton plain trolley can be used on 89 mm and less.
* W20 and W30 mean 203 and 305 mm flange width adjustability as option.

Dimensions (mm)

※Major capacities example.

Code	Headroom: C	a’	b	d	f
CBSP005	295	204	182	2500	2300
CBSP010	305	249	236
CBSP015	365	300	280
CBSP020	380	300	280	3000	2800
CBSP030	535	320	324	3100	2800

Options

Overload Protection Device (OLL)

Chain Container

Trolleys for Curved Beams

Curve radiuses can be made smaller upon request by removing the protective lug. Please consult with your nearest KITO and KITO’s global partners for more details.

Rail Clamp Device

The rail clamp prevents manually-operated trolleys from moving independently. Activated via a hand chain, the trolley rail clamp is convenient when fixing a trolley in a preset position, such as a rolling and pitching ship or within a sloped tunnel.

About Trolley

Manual

Plain Trolley（TSP）

Designed to provide smooth and easy traversing.
Lugs provide protection from striking damage against rail stoppers, and from falling off the rail.
Wheel flange also prevent derailment.
Designed for light load manual applications.

Geared Trolley（TSG）

Designed to provide smooth and easy traversing.
Lugs provide protection from striking damage against rail stoppers, and from falling off the rail.
Wheel flange also prevent derailment.
Designed for precise positioning and traversing by using hand chain.

The post KITO CBSG/CBSP Manual Hoists With Manual Trolley first appeared on Kouei Japan Trading | Get Quotation.

KITO TWER2M Electric Chain Hoists – Application-oriented Models

kvtpart — Fri, 12 Mar 2021 03:00:17 +0000

Product Made in Japan
Manufacturer: KITO
Model: TWER2M

Optimal for lifting applications requiring two lifting points for a wide load or retaining a level lifting.

Features

The KITO Twin Hook electric chain hoist, which is equipped with a single motor and two hooks, is intended for lifting hooks horizontally, equally and safely. Ideal for lifting applications requiring two lifting points for a wide load or retaining a level lifting.

Specifications & Dimensions

Twin Hook Electric Chain Hoist

Specifications

※Major capacities example

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)
Code	Capacity (t)	Std. Lift (m)	Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz
TWER2M 003S	125kg + 125kg	3	0.56	9.2	11.0	0.4	20 (10)	24 (12)
TWER2M 005S	250kg + 250kg		0.9	7.3	8.8
TWER2M 010S	500kg + 500kg		1.8	7.1	8.5
TWER2M 020S	1 + 1		3.5	7.0	8.4
TWER2M 030S	1.5 + 1.5		3.5	4.4	5.3

The bracketed figures in Traversing Speed are low speed.
This product is designed for straight beams.
Specify a beam width at the time of quotation or order.
The following information will be provided upon your request:
1) Precise weight depending on length of the hook span
2) Availability of curve beams
3) Availability of a lift exceeding the maximum (8 m)

Dimensions (mm)

※Major capacities example

Code	Headroom: C		D	d	e	g
Code	With Trolley	Hook	D	d	e	g
TWER2M003S	535	525	620	242	271	27
TWER2M005S	535	525	620	242	268	27
TWER2M010S	615	620	710	291	307	31
TWER2M020S	800	830	790	347	356	39
TWER2M030S	970	995	920	347	356	44

Maximum hook span (S) is 4 m. Longer span is also available so contact KITO and KITO’s global partners.

The post KITO TWER2M Electric Chain Hoists – Application-oriented Models first appeared on Kouei Japan Trading | Get Quotation.

KITO FPAB Series Four Point Adjustable Beam

kvtpart — Sat, 04 Jul 2020 04:24:57 +0000

Product made in Japan
Manufacturer: KITO
Model: FPAB Series

Features:

Each of the four lifting points can be adjusted, making it ideal for lifting work with large loads where the center of gravity is unclear.
A single lifting/spreader beam can handle multiple loads of different lengths.

Options:

Extension of the lower part of the beam (inserting a chain between the high coupling and the hook).
(The chain length is in units of 0.5m up to a maximum of 2m. For lengths exceeding 2m, please contact us separately.)

Specifications

Reference Specifications

Order Symbol	Load Capacity (t)	S1min / S1max (m)		S2min / S2max (m)		C	i	a	b	m	f	g	h	Approx. Weight (kg)
Order Symbol	Load Capacity (t)	S1min (m)	S1max (m)	S2min (m)	S2max (m)	C	i	a	b	m	f	g	h	Approx. Weight (kg)
FPAB03022	3	1.0	2.2	0.6	1.5	798	32	76	118	32	26	34	20	285
FPAB05030	5	1.2	3.0	0.9	2.4	1026	50	100	163	32	30	45	24.5	633
FPAB10036	10	1.8	3.6	0.9	2.4	1306	50	100	173	50	40	51.5	34.5	1079

For spans not listed in the above table, please contact our company separately.

Since it comes with a swivel hook/HJK, the hook rotates.

The post KITO FPAB Series Four Point Adjustable Beam first appeared on Kouei Japan Trading | Get Quotation.

KITO ULSB Series Universal Lifting or Spreader Beam

kvtpart — Sat, 04 Jul 2020 03:36:44 +0000

Product made in Japan
Manufacturer: KITO
Model: ULSB Series

Features

The suspension points at the top and bottom of the spreader beam can be adjusted independently.
A single spreader beam can accommodate multiple loads of different lengths.

Options

Extension of the bottom of the spreader beam (inserting a chain between the high coupling and the hook).
(Chain lengths are available in 0.5m increments up to a maximum of 2m. Please contact us for lengths exceeding 2m.)

Order Symbol	Load Capacity (t)	Dimensions (mm)										Approx. Weight (kg)	Dimensions (mm)				Approx. Weight (kg)
		When equipped with shackles											When equipped with sling hooks/HTL
		C	Smax (m)	Smin (m)	H	Hs1	Hs2	L (m)	b (m)	bs1	bs2		C	f	g	h
UNVB00512	500kg	262	1.2	0.3	284	30	30	1.4	0.4	11	11	25	410	24.5	26	18	26
UNVB00518		262	1.8	0.9	284			2.0	0.6			35	410				36
UNVB00524		284	2.4	1.2	306			2.6	0.8			64	432				65
UNVB00530		284	3.0	1.5	306			3.2	1.0			78	432				79
UNVB01018	1	300	1.8	0.9	324	34	30	2.0	0.6	13	11	52	448	24.5	26	18	53
UNVB01024			2.4	1.2				2.6	0.8			67					68
UNVB01030			3.0	1.5				3.2	1.0			81					82
UNVB02018	2	383.5	1.8	0.9	412.5	40.5	34	2.0	0.6	16	13	79	567	30	31	21.8	80
UNVB02024			2.4	1.2				2.6	0.8			101					102
UNVB02030			3.0	1.5				3.2	1.0			123					124
UNVB03024	3	474	2.4	1.2	509	49.5	40.5	2.6	0.8	19	16	150	689	37.5	39	27.2	152
UNVB03030			3.0	1.5				3.2	1.0			182					184
UNVB03036			3.6	1.8				3.8	1.2			214					216
UNVB05024	5	558.5	2.4	1.2	599.5	50	49.5	2.6	0.8	22	19	197	825.5	47.5	46	34.5	201
UNVB05030			3.0	1.5				3.2	1.0			239					243
UNVB05036			3.6	1.8				3.8	1.2			280					284

◎ The order symbol is for “when equipped with shackles.” ◎ For spans not listed in the above table, please contact us separately.

The post KITO ULSB Series Universal Lifting or Spreader Beam first appeared on Kouei Japan Trading | Get Quotation.

KITO SDSB Series Standard Duty Spreader Beam

kvtpart — Sat, 04 Jul 2020 03:02:24 +0000

Product made in Japan
Manufacturer: KITO
Model: SDSB Series

Features

Ideal for lifting long objects.
Achieves stable and well-balanced lifting.
Lighter compared to the standard type.

Options

Change to single hook, swivel hook, or foundry hook.
Change to a span (S dimension) not listed in the table.
Extension of the bottom part of the beam (X dimension) (inserting a chain between the high coupling and the hook).
(The chain length is in units of 0.5m up to a maximum of 2m. If it exceeds 2m, please contact us separately.)

Dimensions

Models	Load Capacity (t)	Dimensions (mm)										Weight (kg)
Models	Load Capacity (t)	S	C	a	b	f	g	h	i	L	m	Weight (kg)
SDSB-000001	500KG	500	705	63	100	24.5	20	18	14	466	14	8
SDSB-000002		1000	915							676		11
SDSB-000003		1500	1175							935		14
SDSB-000004		2000	1430							1194		17
SDSB-000005	1	500	725	63	100		26	18	14	482	14	10
SDSB-000006		1000	935							692		13
SDSB-000007		1500	1195							951		16
SDSB-000008		2000	1450							1210		20
SDSB-000009		2500	1710							1496		23
SDSB-000010	2	500	750	71	110	30	31	21.8	17	472	17	15
SDSB-000011		1000	1045							764		20
SDSB-000012		1500	1270							990		24
SDSB-000013		2000	1495							1216		29
SDSB-000014		2500	1785							1508		34
SDSB-000015	3	1000	1115	80	125	30	31	21.8	21	806	21	21
SDSB-000016		2000	1635							1325		28
SDSB-000017		3000	2070							1760		36

The post KITO SDSB Series Standard Duty Spreader Beam first appeared on Kouei Japan Trading | Get Quotation.

KITO SDLB Series Standard Duty Lifting Beam

kvtpart — Sat, 04 Jul 2020 02:20:24 +0000

Product made in Japan
Manufacturer: KITO
Model: SDLB Series

Overhead Lifting Equipment

Standard Duty Lifting Beam

Features

Ideal for lifting long objects.
Optimal for operations in height-restricted work environments.

Options

Change to single hook, swivel hook, foundry hook, etc.
Addition of hooks (lifting points)
Change to the span without a bracket (S-type)

Specifications

Order Symbol	Load Capacity (t)	Dimensions (mm)											Weight
Order Symbol	Load Capacity (t)	S	C	a	b	f	g	h	i	L1	L2	m	(kg)
SDLB-000001	500KG	900	350	56	90	24.5	26	18	15	100	75	12	20
SDLB-000002		1600											30
SDLB-000003		2500											42
SDLB-000004		4000	375								100		83
SDLB-000005		4500	375								100		92
SDLB-000006		5000	400								125		143
SDLB-000007		6000	400								125		170
SDLB-000008	1	900	350	56	90	24.5	26	18	15	100	75	12	20
SDLB-000009		1200	350								75		24
SDLB-000010		1600	375								100		38
SDLB-000011		2300	375								100		51
SDLB-000012		4200	400								125		121
SDLB-000013		5000	425								1550		196
SDLB-000014		6000	425								1550		233
SDLB-000015	1.5	1000	385	63	100	24.5	26	18	22	110	100	16	33
SDLB-000016		1500	385								100		44
SDLB-000017		2800	410								125		94
SDLB-000018		4800	435								150		203
SDLB-000019		6000	465
SDLB-000020	2	1000	415	63	100	30	31	21.8	22	110	100	16	34
SDLB-000021		2000	440								125		72
SDLB-000022		3000	465								150		133
SDLB-000023		3500	465								150		151
SDLB-000024		4800	495								180		231
SDLB-000025		6000	515								200		322
SDLB-000026	2.5	900	440	71	110	30	31	21.8	27	120	100	19	35
SDLB-000027		1700	465								125		67
SDLB-000028		2800	490								150		129
SDLB-000029		3800	520								180		190
SDLB-000030		4900	540								200		269
SDLB-000031		6000	540								200		395
SDLB-000032	3	1000	465	71	120	30	31	21.8	27	120	125	19	46
SDLB-000033		2000	490								150		97
SDLB-000034		3000	520								180		154
SDLB-000035		4000	540								200		225
SDLB-000036		5000	540								200		333
SDLB-000037		6000	590								250		448
SDLB-000038	5	1000	540	80	125	37.5	39	27.2	34	135	150	25	66
SDLB-000039		2000	590								200		131
SDLB-000040		3000	590								200		218
SDLB-000041		4000	640								250		315
SDLB-000042		5000	690								300		422
SDLB-000043		6000	690								300		570

For spans not listed in the above table, please contact us separately.
Standard models come with a sling hook/HTL.

The post KITO SDLB Series Standard Duty Lifting Beam first appeared on Kouei Japan Trading | Get Quotation.

KITO VAN LEUSDEN – Standard Headroom Trolley Hoist Combination

kvtpart — Sun, 10 May 2020 03:27:30 +0000

Maker: KITO VAN LEUSDEN

Origin: Netherland

500 KG – 50,000 KG LIFTING CAPACITY

The post KITO VAN LEUSDEN – Standard Headroom Trolley Hoist Combination first appeared on Kouei Japan Trading | Get Quotation.

KITO ER2M Electric Chain Hoists

kvtpart — Thu, 12 Mar 2020 03:00:17 +0000

Product Made in Japan
Manufacturer: KITO
Model: ER2M

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance

Features

Compact body – lightweight
Smooth and ergonomic operation
Reliable safety
Enhanced durability
Easier maintenance
Environmentally friendly

Capacity	125 kg to 20 t
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)	Classification	M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM); H4 (ASME)
		Motor Insulation	Class B for 220-230V (50/60Hz), 380-440V (60Hz) Class F for 380-415V (50Hz), 380-440V (60Hz)
		Enclosure	Hoist Body – IP55, Push Button Control – IP65
Control Voltage	24V (110V for Specific Regions)	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Duty Rating	Single Speed – 60% ED （60 min.） Dual Speed – 40/20% ED （30/10 min.）	Operating Humidity	85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

Smooth and Ergonomic Operation

Inverter – Smooth Transitional Speed
The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
* For non-standard speed ratios, please request them when placing order.
Original Push Button Control
Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
Load Sheave-reduced Vibration
Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

Long-life Friction Clutch
The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
Durable Upper/Lower Limit Switch
The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

Thermal Protector
To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
Magnetic Brake – Failsafe Brake
KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
>10-year/ 2,000,000 cycle brake warranty
>No adjustment needed
>Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

High-end Duty Rating
The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
Unique Motor Frame Fins and Fan Cover
A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

Suspension
The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
Easy Maintenance Control Panel
Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

Environmentally Friendly

No Hazardous Substances
Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.
Energy Saving
Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.
Low-noise
The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Specifications & Dimensions

Dual Lifting Speed ‘Inverter’ – Single Traversing Speed with Motorized Trolley

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Trav. Motor	Traversing Speed (m/min)		Net Wt. (kg)
			Output (kW)		50/60Hz		Output (kW)	50Hz	60Hz
			Output (kW)		High	Low	Output (kW)	50Hz	60Hz
ER2M 001IH -S/L	125kg	3	0.56	Preset	16.6	2.8	0.4	20 (10)	24 (12)	58
ER2M 001IH -S/L	125kg		0.56	Adjust- able	16.6	1.4				58
ER2M 005IS -S/L	500kg		0.9	Preset	8.5	1.4				67
ER2M 005IS -S/L	500kg		0.9	Adjust- able	8.5	0.7				67
ER2M 010IS -S/L	1		1.8	Preset	8.2	1.4				82
ER2M 010IS -S/L	1		1.8	Adjust- able	8.2	0.7				82
ER2M 020IS -S/L	2		3.5	Preset	8.2	1.4				127
ER2M 020IS -S/L	2			Adjust- able	8.2	0.7				127
ER2M 030IS -S/L	3			Preset	5.2	0.9				153
ER2M 030IS -S/L	3			Adjust- able	5.2	0.4				153

The bracketed figures in Traversing Speed are low speed.
The minimum radius curve may depend on flange width.
For further information, contact KITO and KITO’s global partners.

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.\

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001IH-S/L	375	450	315	220	515	205
ER2M005IS-S/L	395	510
ER2M010IS-S/L	435	550
ER2M020IS-S/L	585	630	325	225	520	212
ER2M030IS-S/L	765	900	340	226	521	215

Dual Lifting Speed 500V ‘Pole Change’ – Single Traversing Speed with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Cap. (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Trav. Motor	Traversing Speed (m/min)	Net Wt. (kg)
Code	Cap. (t)	Standard Lift (m)	Output (kW)	50Hz	Output (kW)	50Hz	Net Wt. (kg)
ER2M001HD -S/L	125kg	3	0.5/0.13	14.2/3.5	0.4	20 (10)	62
ER2M005SD -S/L	500kg		0.9/0.23	7.1/1.8			74
ER2M010SD -S/L	1		1.8/0.45	7.2/1.7			88
ER2M020SD -S/L	2		3.5/0.88	6.9/1.6			135
ER2M030SD -S/L	3		3.5/0.88	4.4/1.0			161

The bracketed figures in Traversing Speed are low speed.
The minimum radius curve may depend on flange width.
For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001HD-S/L	375	450	315	268	515	205
ER2M005SD-S/L	395	510
ER2M010SD-S/L	435	550
ER2M020SD-S/L	585	630	325	273	520	212
ER2M030SD-S/L	765	900	340	274	521	215

Dual Lifting ‘Inverter’ – Dual Traversing Speed ‘Inverter’ with Motorized Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Trav. Motor	Traversing Speed* (m/min)		Net Wt. (kg)
			Output (kW)		50/60Hz		Output (kW)	50/60Hz
			Output (kW)		High	Low	Output (kW)	High	Low
ER2M 001IH -IS	125kg	3	0.56	Preset	16.6	2.8	0.4	Preset 24 ——- Adjust- able 24	Preset 4 ——- Adjust- able 2.4	59
ER2M 001IH -IS	125kg		0.56	Adjust- able	16.6	1.4				59
ER2M 005IS -IS	500kg		0.9	Preset	8.5	1.4				69
ER2M 005IS -IS	500kg		0.9	Adjust- able	8.5	0.7				69
ER2M 010IS -IS	1		1.8	Preset	8.2	1.4				84
ER2M 010IS -IS	1		1.8	Adjust- able	8.2	0.7				84
ER2M 020IS -IS	2		3.5	Preset	8.2	1.4				129
ER2M 020IS -IS	2			Adjust- able	8.2	0.7				129
ER2M 030IS -IS	3			Preset	5.2	0.9				155
ER2M 030IS -IS	3			Adjust- able	5.2	0.4				155

The minimum radius curve may depend on flange width.
For further information, contact KITO and KITO’s global partners.

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001IH-IS	375	450	315	220	515	205
ER2M005IS-IS	395	510
ER2M010IS-IS	435	550
ER2M020IS-IS	585	630	325	225	520	212
ER2M030IS-IS	765	900	340	226	521	215

Dual Lifting Speed 500V ‘Pole Change’ – Dual Traversing Speed 500V ‘Pole Change” with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Capacity (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)	Trav. Motor	Traversing Speed (m/min)	Net Weight (kg)
Code	Capacity (t)		Output (kW)	50Hz	Output (kW)	50Hz	Net Weight (kg)
ER2M001 HD-SD	125kg		3	0.5/0.13	14.2/3.5	0.32/0.08	20/5	66
ER2M005 SD-SD	500kg	0.9/0.23		7.1/1.8	77
ER2M010 SD-SD	1	1.8/0.45		7.2/1.7	92
ER2M020 SD-SD	2	3.5/0.88		6.9/1.6	138
ER2M030 SD-SD	3	3.5/0.88		4.4/1.0	0.64/0.16	164

The minimum radius curve may depend on flange width.
For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001HD-SD	375	450	315	268	515	205
ER2M005SD-SD	395	510
ER2M010SD-SD	435	550
ER2M020SD-SD	585	630	325	273	520	212
ER2M030SD-SD	765	900	340	274	521	215

Single Lifting Speed – Single Traversing Speed with Motorized Trolley

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)		Net Weight (kg)
Code	Cap. (t)	Std. Lift (m)	Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz	Net Weight (kg)
ER2M001H -S/L	125kg	3	0.56	14.1	16.9	0.4	20 (10)	24 (12)	58
ER2M005S -S/L	500kg		0.9	7.3	8.8				68
ER2M010S -S/L	1		1.8	7.1	8.5				84
ER2M020S -S/L	2		3.5	7.0	8.4				129
ER2M030S -S/L	3		3.5	4.4	5.3				155

The bracketed figures in Traversing Speed are low speed.
The minimum radius curve may depend on flange width.
For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	m
ER2M001H-S/L	375	450	315	220	515	205
ER2M005S-S/L	395	510
ER2M010S-S/L	435	550
ER2M020S-S/L	585	630	325	225	520	212
ER2M030S-S/L	765	900	340	226	521	215

Large Capacity with Motorized Trolley

The large capacity model is suitable for using with the middle and large crane.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)		Net Weight (kg)
Code	Cap. (t)	Std. Lift (m)	Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz	Net Weight (kg)
ER2M075 S-L	7.5	3	3.5	1.9	2.3	0.75	10	12	283
ER2M100 L-L	10		3.5	1.4	1.7	0.75			378
ER2M100 S-L	10		3.5 × 2	2.9	3.5	0.75 × 2			399
ER2M150 S-L	15			1.9	2.3				571
ER2M200 S-L	20			1.4	1.7				628

Trolley wheels for tapered I-beam are provided as standard.
The wheels for flat flange beam are also available so make a request in advance if necessary.
The minimum radius curve for 7.5 and 10 ton may depend on flange width.
For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	g	w
ER2M075S-L	1165	1230	500	284	61	672
ER2M100L-L	1180	1210			80	728
ER2M100S-L	1180	1020			80	956
ER2M150S-L	1310	1230	1020		86	1129
ER2M200S-L	1345	1230	1020		102	1305

Options

Mechanical Brake with Friction Clutch

Overload Limiter

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch

Rated Capacity: 125 kg to 5 t (Inverter Only)

Limit Lock Function
- 1) Upper/Lower Levels Easily Set with Push Button Switches
  - Function: Capable of setting upper/lower limit stop positions for the bottom hook with the push button switch.
  - Number of configurable positions: 1 position each at the upper/lower limit
  - Position detection method: Encoder detection method
  - Stop control: Automatically decelerate to low-speed operation before a limit position.
- 2) High Speed in No-load
  - Function: Automatically increase to 1.5 times faster than high-speed lifting with a load equivalent to about 20% or lower of the rated capacity.
  - No-load high lifting speed: 1.5 times faster than the rated lifting speed (high speed)
  - Load detection method: Loading factor detection method (current value)
  - Response time: Within about 0.3 second (switching from “high lifting speed” to “no-load high lifting speed”)
Stepless Switch
- Function: Seamless speed adjustment from high to low depending on how hard the push button is pressed.
- Speed range: Up to a speed ratio of 1 (high speed): 1/6 (low speed)
- Effective stroke: Approx. 6.5 mm
- Detection method: Magnetic field detection by hall element.

The post KITO ER2M Electric Chain Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO TD Electrical Supply Rail

kvtpart — Thu, 01 Nov 2018 01:40:12 +0000

Product Made in Japan
Manufacturer: KITO
Model: TD Rail

Easily Installable and Removable Electrical Supply Rail

Features

Lightweight, tough TD rail
Secure, simple rail joint
Accessories swiftly fitted and removed.
Installers: simplicity and flexibility

Material Used	Self-extinguishing Vinyl Chloride Resin (PVC)
Rated Voltage	750V

Technical Characteristics

Standard Specification

Voltage	750V	Applicable Standards	JIS C8373, EN60439-2, EN60204-32
Rated Current	4P/5P-60A, 4P-100A	Ambient Temperature	-20 to 55℃
Protection Grade	IP23	Ambient Humidity	90%RH or Less

Easy-to-USE, Simple KITO TD Rail

Lightweight, Tough TD Rail

The cell-shaped cross-sectional casing structure of the KITO TD rail helps secure high rigidity, while the lightweight, touch design allows up to a 5-pole conductor to pass through.

Secure, Simple Rail Joint

Our original special-purpose connection bolt is used on the KITO TD rail joints, allowing easy installation of the rail via firm tightening, even if no torque wrench is used. With a 2-step-structure head, this special-purpose connection bolt separates the 1st-step bolt head when a specified torque is attained, securely connecting the TD rail.

Accessories Swiftly Fitted and Removed

To facilitate fitting and maintenance, the main accessories have been designed for simpler, swifter, tool-free installation. The feeding box and covering flange are clipped on manually, but cannot be removed without the use of a tool, in accordance with regulations.

Innovation is our aesthetic

TD rail offers ergonomics without forgoing aesthetics. Elegant lines, harmonious colors, and coordinated elements result in a dynamic and smart end product, all combining to make this rail an aesthetically successful innovation.

Degree of Protection: High Performance

TD rail simplifies the user choice by offering a complete range of accessories, all ensuring protection of the line against rain (IP23), thanks to an integrated watertight system.

Users: Security and Reliability.

As well as complying with relevant standards and regulations, the TD rail also stands out for its hard-wearing qualities and ease of maintenance, thanks to the use of toll-free fitting of accessories.

Installers: Simplicity and Flexibility.

Thanks to its limited number of parts, the systematic use of easily removed connections, and rapidly fitted accessories (without tools), TD rail offers installers a system which is simple and quick to set up, whatever the location.

Specifications & Dimensions

TD Rail

Self-extinguishing vinyl chloride resin (PVC)
4P/5P-60A, 4P-100A
Rated voltage: 750V

Specifications

※Major capacities example

Code	Standard Length (m)	Poles-Rating	Mass (kg/m)
ME4604KT	4	4P-60A	1.8
ME4603KT	3
ME4602KT	2
ME4601KT	1

Covering Flange

Self-extinguishing plastic
Used to cover the joint of the TD rail.

Specifications

※Major capacities example

Code	Type	Mass (kg)
ME1000	common	0.2

End Cap

Self-extinguishing plastic
Mounted to the end of the TD rail.

Specifications

※Major capacities example

Code	Type	Mass (kg)
ME1400	common	0.3

End-line Feed Box

Self-extinguishing plastic
Used for supplying the electricity to the TD rail from the end.

Specifications

※Major capacities example

Code	Cable Connector	Applicable Cable 0.D (mm)	Mass (kg)	Dimensions (mm)
Code	Cable Connector	Applicable Cable 0.D (mm)	Mass (kg)	A	B
ME1200	M25	13～19	0.4	181	126
ME1230	M32	15～25		183	128
ME1250	M40	21～32		186	132

In-line Feed Box

Self-extinguishing plastic
Used for supplying the electricity to halfway the TD rail from the line.

Specifications

※Major capacities example

Code	Cable Connector	Applicable Cable 0.D (mm)	Poles	Mass (kg)	Dimensions (mm)
Code	Cable Connector	Applicable Cable 0.D (mm)	Poles	Mass (kg)	A
ME1300	M25	13～19	–	0.3	169
ME1330	M32	15～25	–	0.3	170
ME1332	M40	21～32	4P	1.5	–
ME1329	M40	21～32	5P	1.5	–

Trolley

Travels within the TD rail, and provided with a current-collecting brush for receiving the electricity.
The traveling speed should be 100 m/min. or less.

Specifications

※Major capacities example

Code	Cable Connector	Type	Poles-Rating	Mass (kg)
ME3043KT	M25	Single	4P-35A	0.6
ME4042KT		Double	4P-35A × 2	1.1
ME5040KT		Triple	4P-35A × 3	1.6
ME3051KT		Single	5P-35A	0.6
ME4050KT		Double	5P-35A × 2	1.1
ME5050KT		Triple	5P-35A × 3	1.6

Cleaning Trolley

Used for cleaning the conductor within the TD rail.

Specifications

※Major capacities example

Code	Poles	Mass (kg)
ME4514	4P	0.4
ME4525	5P	0.4

Sliding Hanger

Used for fixing the TD rail.

Specifications

※Major capacities example

Code	Type	Mass (kg)
ME1510	common	0.1

Fixed Hanger

Used for fixing the TD rail.

Specifications

※Major capacities example

Code	Type	Mass (kg)
ME1500	common	0.1

Carrier

Used for coupling the trolley and a mobile object (crane or/and hoist).

Specifications

※Major capacities example

Code	Type	Mass (kg)
ME1600	Single	0.6
ME1610	Double	1.1
ME1630	Triple	2.6

Fixing Bracket

Used for fixing the hanger onto shaped steel, and so on.

Specifications

※Major capacities example

Code	Length (L) (m)	A × B (mm)	Mass (kg)
ME1700	380	15 × 20	0.5
ME1750	500	15 × 20	0.6
ME1760	600	30 × 30	1.0
ME1780	850	30 × 30	1.2

Introduction Gate

Self-extinguishing vinyl chloride resin (PVC)
4P,5-60A, 4P-100A
Used for mounting/dismounting the trolley halfway the line.

Specifications

※Major capacities example

Code	Length (m)	Poles-Rating	Mass (kg)
ME4706KT	2	4P-60A	4.2
ME4756KT		5P-60A	4.4
ME4710KT		4P-100A	4.6

Options

Current-collecting Brush

Special-purpose current-collecting brush for the trolley
The current-collecting brush may be partly worn out.
Replace the current-collecting brush before it reaches the wear limit.

Cleaning Brush

Special cleaning brush for the cleaning trolley
The cleaning brush may be partly deformed or worn out.
Replace the cleaning brush when it is deformed or worn out.

Connection Bolts

Special connection bolts used for the TD rail
When the pre-existing connection bolts are removed while inspecting the TD rail or trolley, ensure they are replaced with new ones.

The post KITO TD Electrical Supply Rail first appeared on Kouei Japan Trading | Get Quotation.

KITO Lifting Magnet

kvtpart — Thu, 01 Nov 2018 01:26:50 +0000

Product Made in Japan
Manufacturer: KITO

Compact, Lightweight, Permanent-Magnet-Type Lifting Magnet

Features

Improved magnetic force per volume, provides efficient workability.
Four magnetic poles unfailingly attach to lifted loads.
12 options available in accordance with your requirements

Maximum Working Load	70 kg to 1000 kg (Flat Steel Excusive Use Types), 70 kg to 950 kg (Flat Steel/Round Steel Common Use types)
Objects Lifted	Steel plates, shape steel and round steel, and their procesed products

Technical Characteristics

Small Capacity 70 kg to Large Capacity 1600 kg Allows You to Lift Both Flat and Round Steel with One Unit

Four Magnetic Poles Unfailingly Attach to Lifted Loads

While a general lifting magnet has only two magnetic poles, Lifting Magnet has four magnetic poles.
This makes possible four bundles of magnetic force,
for efficient and unfailing attachment to lifted loads.
Flat steel/Round steel common use types have
V-shaped grooves in the bottom surfaces with larger open angles that enable magnetic force to flow efficeiently to curved surfaces of round steel.

Assures Safety by Using Permanent Magnets

Uses permanent magnets, unaffected by power supply failure.

Select From 12 Options

12 options are provided from which you can select in accordance with form (flat steel or round steel) and weight of lifted loads.

Easy Handling

Attracts and releases lifted loads easily by simple operation of a switch lever.

Specifications & Dimensions

Flat Steel Exclusive Use Types

These types are used exclusively for lifting flat steel.

Specifications

※Major capacities example

Code	Max. Working Load (kg)	Net Wt. (kg)	A1	C1	B1	D1
KRL7	70	4.2	102	86.5	154	123.5
KRL15	150	7	102	102	179	182
KRL30	300	14	154	127.5	179	180
KRL50	500	21	184	147.5	220	215
KRL80	800	35	242	158	265	270
KRL100	1000	44	263	158	309	300

Flat Steel/Round Steel Common Use Types

V-shaped grooves in the bottom surfaces with larger open angles enable lifting of round steel as well as flat steel.
The range of diameter of round steel to be lifted is φ80mm to φ600mm. (φ80mm to φ300mm for KRM7 and KRM12)

Specifications

※Major capacities example

Code	Max. Working Load (kg)		Net Wt. (kg)	A1	C1	B1	D1
Code	Flat Steel	Round Steel	Net Wt. (kg)	A1	C1	B1	D1
KRM7	70	50 (φ120)	5	102	96.5	154	123.5
KRM12	120	100 (φ160)	7	102	102	179	182
KRM25	250	200 (φ200)	15	154	147.5	179	180
KRM45	450	300 (φ200)	25	184	167.5	220	215
KRM75	750	500 (φ300)	40	242	178	265	270
KRM95	950	700 (φ300)	50	263	178	309	300

The post KITO Lifting Magnet first appeared on Kouei Japan Trading | Get Quotation.

KITO Chain Sling 100

kvtpart — Tue, 30 Oct 2018 07:58:16 +0000

Product Made in Japan
Manufacturer: KITO

Supporting ideal lifting work with outstanding quality

Features

KITO link chain grade 10 achieves the world’s strongest level.
Wide range of variations allow selection of the optimum combination for any application.
High product quality realizes safe and highly efficient work.
Advanced chain manufacturing technologies realize outstanding ultimate elongation.
Achievement of outstanding economic efficiency due to the high wear resistance.

Technical Characteristics

KITO’s Sling Chain is High Quality as same as Load Chain used with Hoits.

Advanced Chain Manufacturing Technologies Realize Outstanding Link Chains

[Ultimate Elongation]
KITO link chains have both a high breaking stress and toughness due to the advanced chain manufacturing technologies that are utilized. This is verified by the numerical value of 20% or more achieved for the ultimate elongation based on the JIS standards requirements.
[Bending Capacity]
Concerning the strength in the link bending directin, the use of advanced welding technologies gives the links sufficient absorbability as shown by the photograph (below) of the result of beding test, and no breakage or cracking occours. (However, this does not indicate that the product should be used until it reaches the condition shown in the photograph.)

Wide Range of Variations allow Selection of the Optimum Combination for Any Application

Standard link chains are provided in various diameters from φ6.0 mm to φ20.0 mm to support work lifting heavy and large-sized objects. The link chain and fitting combinations offer clevis-type products with exclusive retaining pins, and eye-type products which use Hicouplings.
Since a wide range of fittings are also available, it is possible to freely select from among single leg, double leg, triple leg, quadruple leg, and endless types to match the usage purpose.

“Adjustment of Length” can be made, which is not Possible when Using Wires

Chain sling can have their lengths adjusted in single link units to conduct load tilt adjustment or quickly change the sling length, which is not possible when using wires. Depending on the application, the shortening clutch (VWW) or grab hook (VGG, HGG) should be used.

When the load will not change for a certain period, use the shortening Clutch (VWW).
This has a chain dropout prevention function so that the chain will not drop out unexpectedly. Once the length has been set, work can be conducted repeatedly.When the load changes frequently, use the Grab Hook (VFF, HGG).
Because attaching and detaching is easy, length adjustment can be swiftly conducted even if the load changes.

Allows Use Even in Severe Working Environments

The KITO Chain Sling 100 [S5 Series] is actively utilized even in severe working environments. Nickel-plated chain specifications, which are resistant to rusting are recomended for environments that are greatly affected by rainwater, seawater, steam and chemicals. Please consult KITO when you intend to use products for special applications such as in acid or alkaline solutions.

Link Chain & Fittings

KITO link chain grade 10 achieves the world’s strongest level.

Specifications

※Major capacities example

Code	Chain Diameter d (mm)	W.L.L. (t)	Pitch p (mm)	Maximum Outside Width bw (mm)	Breaking Force (kN)
SV2060	6.0	1.1	18.0	22.2	56.5
SV2070	7.0	1.5	21.0	25.9	77
SV2080	8.0	2.0	24.0	29.6	101
SV2100	10.0	3.2	30.0	37.0	160
SV2130	13.0	5.2	39.0	48.1	268

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type)

When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
Each fitting has the chain pins and spring pins attached.
The weight of each fitting shown in catalogue includes the weights of the chain pins and spring pins.

Fittings (Clevis Type) – Clevis Master Link VE for single leg slings

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	m	t
VE2060	1.1	6	115	56	79	90	11.5
VE2070	1.5	7	131	63	91	100	14
VE2080	2.0	8	130.5	63	91	100	14
VE2100	3.2	10	146	71	105	110	17
VE2130	5.2	13	169.5	80	122	125	21

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Clevis Master Link VD for double leg slings, for triple and quadruple leg slings

Specifications

※Major capacities example

Using Single Connector VA or Dual Connector VB

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	D	T,Q	p	a	b	m	t
VD206	1.7	6	–	125	63	91	100	14
VD20706	2.4	7	6	140	71	105	110	17
VD20807	3.2	8	7	139.5	71	105	110	17
VD21008	5.1	10	8	159	80	122	125	21
VD21310	8.0	13	10	179.5	90	142	140	26

W.L.L.: Working Load Limit (t)
Chain Diameter D,TQ mean the number of sling legs. D: Double leg slings / TQ: Triple and quadruple leg slings

Fittings (Clevis Type) – Single Connector VA

Specifications

※Major capacities example

Code	Chain Diameter (mm)	Dimensions (mm)
Code	Chain Diameter (mm)	p	h	b	l	t
VA2060	6	39.5	38	22	69	7
VA2070	7	43	38	27	75.5	8
VA2080	8	50	44	27	84.5	10
VA2100	10	59	54	34	102	12.5
VA2130	13	80	66	42	132	16

Fittings (Clevis Type) – Dual Connector VB

Specifications

※Major capacities example

Code	Chain Diameter (mm)	Dimensions (mm)
Code	Chain Diameter (mm)	p	h	b	l	t
VB2060	6	39.5	38	48	70	7
VB2070	7	43	38	57	77	8
VB2080	8	50	44	57	86	10
VB2100	10	59	54	72	104	12.5
VB2130	13	80	66	90	134	16

Fittings (Clevis Type) – Sling Hook VSL(VSL3)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VSL3060	1.1	6	85	38	45	24.5	18
VSL3070	1.5	7	100	44	50	30	21.8
VSL3080	2.0	8	99.5	44	50	30	21.8
VSL3100	3.2	10	119	54	56	37.5	27.2
VSL3130	5.2	13	140	66	63	47.5	34.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Foundry Hook VF

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VF2060	1.1	6	100	32	53	26	21.5
VF2070	1.5	7	120.4	40	64	31	25.5
VF2080	2.0	8	120.4	40	64	31
VF2100	3.2	10	131	50	76	34
VF2130	5.2	13	165	58	89	44.5	40

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Grab Hook VG

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	m	s
VG2060	1.1	6	50.5	30	8	20.5
VG2070	1.5	7	65.5	37	10	27.5
VG2080	2.0	8	65	37	10	27.5
VG2100	3.2	10	80	45	13	36
VG2130	5.2	13	105.5	56	16	47

W.L.L.: Working Load Limit (t)
In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the above table.

Fittings (Clevis Type) – Shortening Clutch VW

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	m	r	l
VW2060	1.1	6	45	30	8	24	74
VW2070	1.5	7	56	35	8.6	27.5	92.5
VW2080	2.0	8	56	35	9.6	30.5	92.5
VW2100	3.2	10	78	47	12.5	38.5	125.5
VW2130	5.2	13	90	58	15	50.5	146.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Shackle VN

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	d
VN2060	1.1	6	65	26.5	50	43	14
VN2070	1.5	7	70.5	30.5	60	47.5	17
VN2080	2.0	8	70	30.5	60	47.5	17
VN2100	3.2	10	79.5	34	68	53	20
VN2130	5.2	13	99.5	43	85	67	25

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Single Connector VC

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	l	t
VC2060	1.1	6	50	18.5	45	77.5	13.5
VC2070	1.5	7	65	26.5	60	99.5	17
VC2080	2.0	8	64.5	26.5	60	99.5	17
VC2100	3.2	10	79	32.5	74	123	21.5
VC2130	5.2	13	99.5	42	94	154	26.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Endless Connector VR

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	l
VR2060	1.1	6	25.5	38	55
VR2070	1.5	7	31	44	67
VR2080	2.0	8	30	44	67
VR2100	3.2	10	39	54	86
VR2130	5.2	13	50	66	108

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Sling Hook (Small Hook) VSL(VSL2)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VSL2060	1.1	6	69	29.5	29.5	20.5	15
VSL2070	1.5	7	95	36	39	28	19
VSL2100	3.2	10	110	44.5	47	33	25
VSL2130	5.2	13	136	51	58	41	30
VSL2160	8.0	16	155	67	64	49	37.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type)

When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
The specifications of eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
In addition to using the eye-type components by assembling them as KITO Chain Sling 100 products, they can also be used for many other purposes.
Each fitting is not provided with a Hi-coupling HC. This should be ordered at the same time when placing the order for the fitting.

Fittings (Eye Type) – Master Link HM

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	S	D	p	a	d	t
HM20706	1.1	6	–	110	60	13	11
HM20706	1.7	7	6			13	11
HM20807	2.4	8	7			16	14
HM21008	3.2	10	8	135	75	18	15
HM21310	5.2	13	10	160	90	22	18.5
HM21613	8.0	16	13	180	100	26	22

W.L.L.: Working Load Limit (t)
Chain Diameter S,D mean the number of sling legs. S: Single leg slings / D: Double leg slings

Fittings (Eye Type) – Sling Hook HTL(HTL3)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HTL3060	1.1	6	100	23	11	45	24.5
HTL3080	1.5	7	120	27	13.5	50	30
HTL3080	2.0	8	120	27	13.5	50	30
HTL3100	3.2	10	140	32.5	17	56	37.5
HTL3130	5.2	13	171	38	21.5	63	47.5
HTL3160	8.0	16	200	46	26.5	75	60

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Self Locking Hook HJ

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HJ2060	1.1	6	109	19.5	11	34.5	20.5
HJ2080	1.5	7	135	24.5	12	43.5	25.5
HJ2080	2.0	8	135	24.5	12	43.5	25.5
HJ2100	3.2	10	168	32	16	56	30.5
HJ2130	5.2	13	205	38.5	20	69	39.5
HJ2160	8.0	16	251	48	27	80	49

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Swivel Hook HK

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	n
HK2060	1.1	6	158	35.5	14	26	34.5
HK2080	1.5	7	182				43.5
HK2080	2.0	8	182				43.5
HK2100	3.2	10	217	43.5	17.5	33	56
HK2130	5.2	13	271	48.5	22.5	43	69

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Foundry Hook HQ

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HQ2060	1.1	6	102.5	13.5	12.5	53	26
HQ2080	1.5	7	125	22.5	15	62	31.5
HQ2080	2.0	8	125	22.5	15	62	31.5
HQ2100	3.2	10	150	30	16.5	76	34
HQ2130	5.2	13	173	25.5	20.5	89	44.5
HQ2160	8.0	16	210	45	26	101	50.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Grab Hook HH

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	m	s
HH2060	1.1	6	51.5	12	10	8	20.5
HH2080	1.5	7	69	15.5	12.5	10	27
HH2080	2.0	8	69	15.5	12.5	10	27
HH2100	3.2	10	86.5	20.5	17.5	13	36
HH2130	5.2	13	110.5	23.5	19.5	16	47.5
HH2160	8.0	16	129	30	23	19	60.5

W.L.L.: Working Load Limit (t)
In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the above table.

Fittings (Eye Type) – Hi-coupling HC

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	d
HC3060	1.1	6	48	16.8	45	17.5	8
HC3070	1.5	7	55	19.4	51	19	9.4
HC3080	2.0	8	63	22	57	23	10.6
HC3100	3.2	10	75	26.5	70	27	13.1
HC3130	5.2	13	96	34	89	36	16.8

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Sling Hook (Small Hook) HTL(HTL2)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HTL2060	1.1	6	81	18.5	11.5	29.5	20.5
HTL2080	1.5	7	101	23.5	11	39	27
HTL2080	2.0	8	101	23.5	11	39	27
HTL2100	3.2	10	131	32.5	16	47	33
HTL2130	5.2	13	159	41.5	19	58	43
HTL2160	8.0	16	183	48	24.5	64.5	48.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Master Link with Sub Links HMS for triple and quadruple Leg slings

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	d
HMS2060	2.6	6	135	75	18
HMS2070	3.2	7	135	75	18
HMS2080	4.2	8	160	90	22
HMS2100	6.4	10	180	100	26
HMS2130	10.4	13	200	110	32

W.L.L.: Working Load Limit (t)
The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.

Fittings (Eye Type) – Large Master Link HL/HLD

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	S	D	p	a	d	t
HL020	1.1	6	–	225	112	17	13
	1.5	7	–
	1.7	–	6
	2.0	8	7
HL030	3.2	10	8			20	16
HL050	5.0	13	10			23	19.5

W.L.L.: Working Load Limit (t)
Chain Diameter S,D mean number of chain. S: Single sling / D: Double sling

Standard Sling Types

Standard Sling Types (Clevis Type SCP2)

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Clevis Type SCP2) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-VE-VE	S-VE-VSS	S-VE-VF	S-VE-VG*	S-VE-VC	S-VE-VN	S-VE-VW	S-VSS-VSS	S-VSS-VG*	S-VSS-VW	S-VW-VW
1.1	6 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.14
1.1	6 (× 1)	Weight	1.8	2.0	2.1	1.7	1.7	2.0	1.7	2.2	1.9	1.9	0.46
1.5	7 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.17
1.5	7 (× 1)	Weight	2.7	3.0	3.2	2.5	2.6	3.0	2.6	3.3	2.9	2.9	1.0
2.0	8 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.18
2.0	8 (× 1)	Weight	3.1	3.4	3.5	2.9	3.0	3.4	3.0	3.7	3.3	3.4	1.1
3.2	10 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.24
3.2	10 (× 1)	Weight	4.9	5.6	5.5	4.9	4.9	5.4	5.1	6.3	5.6	5.7	2.4
5.2	13 (× 1)	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	0.29
5.2	13 (× 1)	Weight	10.8	12.4	12.2	11.0	10.9	11.6	10.8	13.7	12.3	12.1	4.0

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Clevis Type SCP2) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-VD-VSS	D-VD-VF	D-VD-VC	D-VD-VN	D-VD-OO
1.7	6 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 (× 2)	Weight	3.9	4.2	3.4	3.9	3.0
2.4	7 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	7 (× 2)	Weight	5.9	6.2	5.1	5.8	4.3
3.2	8 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 (× 2)	Weight	6.7	6.9	5.8	6.6	5.1
5.1	10 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.1	10 (× 2)	Weight	11.1	11.1	10.0	11.0	8.3
8.0	13 (× 2)	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 (× 2)	Weight	24.1	24.3	21.7	23.1	18.5

Standard Sling Types (Clevis Type SCP2) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-VD-VSS	T-VD-VF	T-VD-VC	T-VD-VN
2.4	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.4	6 (× 3)	Weight	6.4	6.9	5.7	6.4
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.9	9.4	7.7	8.9
5.0	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
5.0	8 (× 3)	Weight	11.2	11.4	10.1	11.0
8.0	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
8.0	10 (× 3)	Weight	18.8	18.8	17.1	18.6
12.5	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
12.5	13 (× 3)	Weight	40.5	40.8	36.0	38.1

Standard Sling Types (Clevis Type SCP2) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-VD-VSS	Q-VD-VF	Q-VD-VC	Q-VD-VN	Q-VD-OO
2.4	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	6 (× 4)	Weight	8.2	8.7	7.1	8.1	6.2
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	11.5	12.0	9.8	11.3	8.0
5.0	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 (× 4)	Weight	14.3	14.4	12.6	13.9	10.8
8.0	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 (× 4)	Weight	24.0	23.6	21.3	23.3	18.0
12.5	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0	2.0
12.5	13 (× 4)	Weight	51.8	51.3	44.9	47.7	39.0

Standard Sling Types (Eye Type SCE2)

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HM-HM	S-HM-HTS	S-HM-HJ	S-HM-HK	S-HM-HQ	S-HM-HH*	S-HTS-HTS	S-HTS-HH
1.1	6 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
1.1	6 (× 1)	Weight	1.8	2.0	2.0	2.1	2.1	1.7	2.1	1.9
1.5	7 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
1.5	7 (× 1)	Weight	2.4	2.9	2.9	3.0	2.9	2.5	3.3	3.0
2.0	8 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
2.0	8 (× 1)	Weight	3.1	3.4	3.6	3.6	3.5	3.1	3.7	3.4
3.2	10 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
3.2	10 (× 1)	Weight	5.1	5.8	5.8	6.1	6.0	5.2	6.5	5.9
5.2	13 (× 1)	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
5.2	13 (× 1)	Weight	10.7	12.1	12.1	12.8	11.9	11.4	13.5	12.8

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Eye Type SCE2) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HM-HTS	D-HM-HJ	D-HM-HK	D-HM-HQ	D-HM-OO
1.7	6 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 (× 2)	Weight	3.6	3.7	3.8	3.9	2.7
2.4	7 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	7 (× 2)	Weight	5.6	5.7	5.9	5.6	3.9
3.2	8 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 (× 2)	Weight	6.6	6.8	7.0	6.8	5.1
5.1	10 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.1	10 (× 2)	Weight	11.1	11.3	11.6	11.5	8.2
8.0	13 (× 2)	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 (× 2)	Weight	23.5	23.5	24.3	23.1	17.7

Standard Sling Types (Eye Type SCE2) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HM-HTS	T-HM-HJ	T-HM-HK	T-HM-HQ
2.4	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.4	6 (× 3)	Weight	5.7	5.8	6.0	6.1
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.5	8.9	9.2	8.8
5.0	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
5.0	8 (× 3)	Weight	10.7	10.8	11.0	10.9
8.0	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
8.0	10 (× 3)	Weight	17.9	18.2	18.7	18.5
12.5	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
12.5	13 (× 3)	Weight	36.8	37.7	38.9	36.2

Standard Sling Types (Eye Type SCE2) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HM-HTS	Q-HM-HJ	Q-HM-HK	Q-HM-HQ	Q-HM-OO
2.4	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	6 (× 4)	Weight	7.3	7.4	7.7	7.8	5.5
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	10.9	11.4	11.8	11.3	7.7
5.0	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 (× 4)	Weight	13.4	13.6	13.9	13.7	10.2
8.0	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 (× 4)	Weight	22.4	22.8	23.5	23.2	16.3
12.5	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0	2.0
12.5	13 (× 4)	Weight	46.5	47.7	49.3	45.7	35.5

Standard Sling Types (Eye Type SCE2 (HMS)) Master Link HMS with Sub Links

Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2 (HMS)) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HMS-HTS	T-HMS-HJ	T-HMS-HK	T-HMS-HQ
2.6	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.6	6 (× 3)	Weight	6.0	6.1	6.3	6.4
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.5	8.9	9.1	8.7
4.2	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
4.2	8 (× 3)	Weight	10.5	10.9	11.1	10.8
6.4	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
6.4	10 (× 3)	Weight	17.2	17.5	18.0	17.8
10.4	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
10.4	13 (× 3)	Weight	35.6	36.5	37.7	35.0

Standard Sling Types (Eye Type SCE2 (HMS)) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HMS-HTS	Q-HMS-HJ	Q-HMS-HK	Q-HMS-HQ
2.6	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5
2.6	6 (× 4)	Weight	7.6	7.7	8.0	8.1
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	10.9	11.4	11.8	11.2
4.2	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5
4.2	8 (× 4)	Weight	13.3	13.7	14.0	13.6
6.4	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5
6.4	10 (× 4)	Weight	21.7	22.1	22.8	22.5
10.4	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0
10.4	13 (× 4)	Weight	45.3	46.5	48.1	44.5

Standard Sling Types (Eye Type SCE2 (HL/HLD)) Master Link HL/HLD

Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HL-HL	S-HL-HTS	S-HL-HJ	S-HL-HK	S-HL-HQ	S-HL-HH^※
1.1	6（×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
1.1	6（×1）	Weight	3.7	2.9	2.9	3.0	3.1	2.7
1.5	7 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
1.5	7 （×1）	Weight	4.1	3.7	3.8	3.9	3.8	3.3
2.0	8 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
2.0	8 （×1）	Weight	4.1	3.9	4.0	4.1	4.0	3.5
3.2	10 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
3.2	10 （×1）	Weight	6.1	6.2	6.3	6.5	6.4	5.6
5.0	13 （×1）	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0
5.0	13 （×1）	Weight	11.1	12.3	12.6	13.0	12.1	11.6

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HLD-HLD	S-HLD-HTS	S-HLD-HJ	S-HLD-HQ	S-HLD-HH
8.0	16 （×1）	Reach: L	2.5	2.5	2.5	2.5	2.5
8.0	16 （×1）	Weight	29.7	28.6	28.4	27.9	26.8
11.5	20 （×1）	Reach: L	3.0	3.0	–	3.0	3.0
11.5	20 （×1）	Weight	47.2	49.0	–	46.2	43.5

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HL-HTS	D-HL-HJ	D-HL-HK	D-HL-HQ	D-HL-OO
1.7	6 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 （×2）	Weight	4.7	4.6	4.8	4.9	3.7
2.0	7 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
2.0	7 （×2）	Weight	6.2	6.5	6.6	6.4	4.6
3.2	8 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 （×2）	Weight	7.0	7.2	7.4	7.2	5.5
5.0	10 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	10 （×2）	Weight	11.3	11.5	11.9	11.7	8.3

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HLD-HTS	D-HLD-HJ	D-HLD-HK	D-HLD-HQ	D-HLD-OO
8.0	13 （×2）	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 （×2）	Weight	30.3	30.3	31.1	29.9	24.5
11.5	16 （×2）	Reach: L	2.5	2.5	–	2.5	2.5
11.5	16 （×2）	Weight	55.6	55.2	–	54.2	44.9

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Triple Leg Sling

Specifications

※Major capacities example.

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HL-HTS	T-HL-HJ	T-HL-HK	T-HL-HQ
2.0	6 （×3）	Reach: L	1.5	1.5	1.5	1.5
2.0	6 （×3）	Weight	6.2	6.1	6.4	6.6
3.2	7 （×3）	Reach: L	1.5	1.5	1.5	1.5
3.2	7 （×3）	Weight	8.9	9.3	9.4	9.2
5.0	8 （×3）	Reach: L	1.5	1.5	1.5	1.5
5.0	8 （×3）	Weight	10.8	11.2	11.4	11.0

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HLD-HTS	T-HLD-HJ	T-HLD-HK	T-HLD-HQ
8.0	10 （×3）	Reach: L	1.5	1.5	1.5	1.5
8.0	10 （×3）	Weight	23.9	24.2	24.7	24.5
11.5	13 （×3）	Reach: L	2.0	2.0	2.0	2.0
11.5	13 （×3）	Weight	43.7	44.6	45.8	43.1

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HL-HTS	Q-HL-HJ	Q-HL-HK	Q-HL-HQ	Q-HL-OO
2.0	6 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
2.0	6 （×4）	Weight	7.7	7.6	7.9	8.2	5.8
3.2	7 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 （×4）	Weight	11.3	11.7	11.9	11.6	8.0
5.0	8 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 （×4）	Weight	13.4	13.9	14.2	13.7	10.3

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HLD-HTS	Q-HLD-HJ	Q-HLD-HK	Q-HLD-HQ	Q-HLD-OO
8.0	10 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 （×4）	Weight	28.0	28.4	29.1	28.8	21.9
11.5	13 （×4）	Reach: L	2.0	2.0	2.0	2.0	2.0
11.5	13 （×4）	Weight	52.9	54.1	55.7	52.1	41.9

The post KITO Chain Sling 100 first appeared on Kouei Japan Trading | Get Quotation.

KITO Low-head End Carriage

kvtpart — Tue, 30 Oct 2018 07:38:47 +0000

Product Made in Japan
Manufacturer: KITO

Ultimate Light-weight & Compact Size, Meticulous Dedicated Design

Features

To meet customer needs, we have enhanced performance while offering more standardized models.
The track wheel is now made of carbon steel, making it sturdier and longer-lasting.
Products are primer-coated, which allows customers to choose the desired top coat color.
Punch-mark on end carriages for easy centering and drilling for girders.

Capacity	1 to 5 t
Max. Span	6 to 15 m
Traveling Motor Output (kW × 2)	0.21/0.25 to 0.63/0.75 m/min (50/60 Hz)

Specifications & Dimensions

Motorized Low-head End Carriage

Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Square Rail (mm)	Max. Wheel Pressure (kN)
			L	S	H	SD
			10/ 12	20/ 24	30/ 36	20:5/ 24:6
EL010-12	1	12	0.21/ 0.25	0.21/ 0.25	0.34/0.4(B) 0.21/0.25(E,Z)	0.21:0.053/ 0.25:0.063	75・100・ 125・150	4.51
EL020-12	2				0.34/0.4(B) 0.21/0.25(E,Z)		100・125・150	9.31
EL030-12	3				0.34/0.4		100・125・150	10.5
EL050-12	5		0.63/ 0.75	0.63/ 0.75	0.63/0.75(E)	0.63:0.16/ 0.75:0.19(E,Z)	125・150	17.6

Capacity: Working Load Limit (t)
To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails or on the rail track.)
Use I-beam for the traveling rail.
When planning a girder or cart, contact KITO and KITO’s global partners.
E: 200V50Hz, 200-220V/60Hz
Z: 380-415V/50Hz, 440-460V/60Hz
B: 220v/50Hz, 208-230V/60Hz, 380V/50Hz, 380-460V/60Hz

Dimensions (mm)

※Major capacities example

Code	A	D	M	U	Y*
EO010-12	1840	1400	T+171	34	121
EO020-12			T+191	36	165
EL030-12			T+241	38	162
EL050-12	2200	1760	T+279	39	201

* The height from the track surface of the traveling rail to the top of the end carriage.

Urethane Wheel Motorized Low-head End Carriage

This end carriage employs durable urethane wheels developed by KITO and an idling gear in reinforced nylon resin and reduces noise and vibrations in travel. Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation maintenance time.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Square Rail (mm)	Max. Wheel Pressure*1 (kN)
			L	S	H	SD
			10/12	20/24	30/36	20:5/ 24:6
CEL010-9	1	9	0.21/ 0.25	0.21/ 0.25	0.34/0.4(B) 0.21/0.25(E,Z)	0.21:0.053/ 0.25:0.063	125・150	3.8
CEL020-9	2	9	0.34/ 0.4	0.34/ 0.4	0.63/0.75	0.34:0.084/ 0.4:0.1	125・150	6.7

Capacity.: Working Load Limit (t)
*1 Wheel pressure under the capacity beneath the end carriage with standard girder and maximum span to verify the endurance of the structure.
*2 In case of regular use of more than 80% of capacity or frequent operation at a particular position, select an end carriage to make the wheel pressure the same as or less than the recommended wheel pressure.
Use I-beam for the traveling rail.
When planning a girder or cart, contact KITO and KITO’s global partners.
E: 200V50Hz, 200-220V/60Hz
Z: 380-415V/50Hz, 440-460V/60Hz
B: 220v/50Hz, 208-230V/60Hz, 380V/50Hz, 380-460V/60Hz

Dimensions (mm)

※Major capacities example

Code	A	D	M	U	Y*
CEL010-9	1500	1060	T+171	34	121
CEL020-9	1500	1060	T+211	35	165

* The size with the standard speed (s) geared motor.

Geared Type Manual Low-head End Carriage

Both the track wheel and track wheel axle are designed for easy detaching thus reducing installation and maintenance time.

Specifications

※Major capacities example.

Code	Cap. (t)	Max. Span (m)	Applicable Traveling Rail (mm)	Max. Wheel Pressure (kN)
GL010-12	1	12	75・100・125・150	4.5
GL020-12	2		100・125・150	9.31
GL030-12	3		100・125・150	10.78
GL050-12	5		125・150	17.6

Capacity: Working Load Limit (t)
To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails track.)
Use I-beam for the traveling rail.
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	D	H	M	Y*
GL010-12	1840	1400	715	T+211	121
GL020-12			715	T+201	145
GL030-12			599.2	T+231	177
GL050-12			579	T+249	188

* The height from the track surface of the traveling rail to the top of the end carriage.

Plain Type Manual Low-head End Carriage (No Side Rollers)

The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 ton span 3 m and 1 ton span 6 m) and side rollers (1 ton span 9 m).

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Applicable Traveling Rail (mm)	Max. Wheel Pressure (kN)	Wheel Diameter (mm)
PL005-3	0.5	3	75・100	1.76	71
PL005-6	0.5	6	75・100・125	3.5	85
PL010-6	1	6	75・100・125	3.5	85

Capacity: Working Load Limit (t)
To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails track.)
Use I-beam for the traveling rail.
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	D	M	U	Y*
PL005-3	470	350	T+157	25	89
PL005-6	830	700	T+161	31	106
PL010-6	830	700	T+161	31	106

*The height from the track surface of the traveling rail to the top of the end carriage.

Plain Type Manual Low-head End Carriage (Side Rollers)

The hand pulling operation has become smoother and easier with a pressed metal wheel (0.5 ton span 3 m and 1 ton span 6 m) and side rollers (1 ton span 9 m).

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Applicable Traveling Rail (mm)	Max. Wheel Pressure (kN)	Wheel Diameter (mm)
PL010-9	0.5	9	75・100・125	3.92	95
PL010-9	1	9	75・100・125	3.92	95

Capacity: Working Load Limit (t)
To reinforce a connecting part of the rails with a plate on the rail web, make sure that the plate has a clearance for the end carriage. (Do not install the plate for 75 mm width rails track.)
Use I-beam for the traveling rail.
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	D	M	U	Y*
PL010-9	1150	650	T+174	26	95

* The height from the track surface of the traveling rail to the top of the end carriage.

The post KITO Low-head End Carriage first appeared on Kouei Japan Trading | Get Quotation.

KITO Overhead End Carriage

kvtpart — Tue, 30 Oct 2018 07:28:01 +0000

Product Made in Japan
Manufacturer: KITO

Ultimate Light-weight & Compact Size, Meticulous Dedicated Design

Features

To meet customer needs, we have enhanced performance while offering more standardized models.
The track wheel is now made of carbon steel, making it sturdier and longer-lasting.
Products are primer-coated, which allows customers to choose the desired top coat color.
Punch-mark on end carriages for easy centering and drilling for girders.

Capacity	1 to 20 t
Max. Span	3 to 27m
Traveling Motor Output (kW × 2)	0.21/0.25 to 1.25/1.5 x 2 m/min (50/60 Hz)

Specifications & Dimensions

Motorized Overhead End Carriage

Track wheel maintenance is easy because of the open frame construction. Travel is smooth because of a guide mechanism with side rollers.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Square Rail (mm)	Max. Wheel Pressure (kN)
			L	S	H	SD
			10/12	20/24	30/36	20:5/ 24:6
EO010-12*	1	12	0.21/ 0.25	0.21/ 0.25	0.21/ 0.25	0.21:0.053/ 0.25:0.063	□32・□40 □38・□45	9.31
EO020-12*	2				0.21/ 0.25		□32・□40 □38・□45	17.6
EO030-12*	3				0.34/ 0.4		□45・□50	20.6
EO050-9*	5	9			0.34/ 0.4		□50	31.4
EO075-12*	7.5	12	0.63/ 0.75	0.63/ 0.75	1.25/ 1.5	0.63:0.16/ 0.75:0.19	□55・□60	73.5
EO100-12*	10	12	0.63/ 0.75	0.63/ 0.75	1.25/ 1.5	0.63:0.16/ 0.75:0.19	□55・□60	73.5

Capacity: Working Load Limit (t)
* Geared motors installed in diagonal positions as shown in the left photo.

Dimensions (mm)

※Major capacities example

Code	A	B	D	F	Y
EO010-12*	1580	1400	900	15.5	171
EO020-12*				20.5	176
EO030-12*				20.5	176
EO050-9*	1490	1300	800	23.5	224
EO075-12*	1645	1405	900
EO100-12*	1645	1405	900

Urethane Wheel Motorized Overhead End Carriage

Durability has been improved with our own developed urethane wheels. The urethane wheels run directly over the top flange of the H-beam, thus reducing noise and vibration in travel. It is not necessary to install a light rail thus reducing installation costs and time. Travel is smooth because of a guide mechanism with side rollers.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Traveling Rail*1 (mm)	Max. Wheel Pressure*2 (kN)
			L	S	H	SD
			10/12	20/24	30/36	20:5/ 24:6
CEO010-9*3	1	9	0.21/ 0.25	0.21/ 0.25	0.21/ 0.25	0.21:0.053/ 0.25:0.063	100・125・150	7.8
CEO010-12*3	1	12	0.34/ 0.4	0.34/ 0.4	0.34/ 0.4	0.34:0.084/ 0.4:0.1	150・175・200	14.7
CEO020-12*3	2	12	0.34/ 0.4	0.34/ 0.4	0.34/ 0.4	0.34:0.084/ 0.4:0.1		14.7
CEO020-15	2	15	0.63/ 0.75	0.63/ 0.75	0.63/ 0.75	0.63:0.16/ 0.75:0.19		33.3
CEO030-15	3	15			0.63/ 0.75
CEO050-12*3	5	12			1.25/ 1.5
CEO075-12*3	7.5		1.25/ 1.5	1.25/ 1.5		–		61.7
CEO100-12*3	10		1.25/ 1.5	1.25/ 1.5		–		61.7

Capacity: Working Load Limit (t)
*1 Contact KITO and KITO’s global partners for sizes other than listed above.
*2 Wheel pressure under the capacity beneath the end carriage with standard girder and maximum span to verify endurance of the structure.
*3 Geared motors installed in diagonal positions as shown in the left photo.
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	B	D	F	Y
CEO010-9	1586	1307	800	32	188
CEO010-12	1696	1445	900
CEO020-12	1696	1445	900
CEO020-15	2082	1761	1000	39	239
CEO030-15	2082	1761	1000
CEO050-12	1852	1531	900
CEO075-12	2081	1766
CEO100-12	2081	1766

Motorized Overhead Double Girder End Carriage

Track wheel maintenance is easy because of the open frame construction. Travel is smooth because of a guide mechanism with side rollers.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Square Rail (mm)	Max. Wheel Pressure (kN)
			L	S	H	SD
			10/12	20/24	30/36	20:5/ 24:6
WEO030-21	3	21	0.34/ 0.4	0.34/ 0.4	0.63/ 0.75	0.34:0.084/ 0.4:0.1	□50	44.1
WEO050-15	5	15	0.34/ 0.4	0.34/ 0.4	0.63/ 0.75	0.34:0.084/ 0.4:0.1	□50	44.1
WEO050-21	5	21	0.63/ 0.75	0.63/ 0.75	1.25/ 1.5	0.63:0.16/ 0.75:0.19	□55・□60	73.5
WEO075-21	7.5	21
WEO100-15	10	15
WEO100-21	10	21			1.25/ 1.5 x 2			82.3

Capacity: Working Load Limit (t)
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	B	D	F	Y
WEO030-21	2845	2630	2195	23.5	224
WEO050-15	2845	2630	2195
WEO050-21	3095	2855	2390
WEO075-21	3098	2855	2395		274
WEO100-15	3098	2855	2395		274
WEO100-21	3288	3045	2540		324

Urethane Wheel Motorized Overhead Double Girder End Carriage

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Traveling Motor Output (kW x 2) 50/60 Hz (m/min)				Applicable Square Rail*1 (mm)	Max. Wheel Pressure*2 (kN)
			L	S	H	SD
			10/12	20/24	30/36	20:5/24:6
CWEO030-21	3	21	1.25/ 1.5	1.25/ 1.5	1.25/ 1.5	–	150・175・200	41.2
CWEO050-15	5	15	1.25/ 1.5	1.25/ 1.5	1.25/ 1.5		150・175・200
CWEO050-27	5	27	1.25/ 1.5 × 2	1.25/ 1.5 × 2	1.25/ 1.5 × 2		175・200
CWEO075-21	7.5	21				–
CWEO100-15	10	15
CWEO100-27	10	27					200・250	61.7
CWEO150-21	15	21					200・250	61.7

Capacity: Working Load Limit (t)
*1 Contact KITO and KITO’s global partners for sizes other than listed above.
*2 Wheel pressure under the capacity beneath the end carriage with standard girder and maximum span to verify endurance of the structure.
When planning a girder or cart, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	A	B	D	F	Y
CWEO030-21	3111	2796	2295	39	239
CWEO050-15	3111	2796	2295		239
CWEO050-27	3771	3456	2700		289
CWEO075-21
CWEO100-15
CWEO100-27	4412	4063	3220		426
CWEO150-21	4412	4063	3220	46	426

Geared Type Manual Overhead End Carriage

Pulling the hand chain makes both wheels move at the same time for balanced smooth traveling.

Specifications

※Major capacities example

Code	Cap. (t)	Max. Span (m)	Applicable Square Rail (mm)	Max. Wheel Pressure (kN)	Wheel Diameter (mm)
GO010-12	1	12	□32・□38 □40・□45	9.31	95
GO020-12	2		□32・□38 □40・□45	17.6	125
GO030-12	3		□40・□50	20.6	140
GO050-12	5		□50	44.1	210

Capacity: Working Load Limit (t)
When planning a girder or cart, contact your nearest KITO distributor.

Dimensions (mm)

※Major capacities example

Code	A	B	D	F	Y*
GO010-12	1580	1400	900	15.5	147
GO020-12					172
GO030-12					202
GO050-12	1590			18.5	205

* The height from the track surface of the traveling rail to the top of the end carriage.

The post KITO Overhead End Carriage first appeared on Kouei Japan Trading | Get Quotation.

KITO Low-head Cranes

kvtpart — Tue, 30 Oct 2018 07:14:03 +0000

Product Made in Japan
Manufacturer: KITO

Prioritizing every industrial workplace – KITO CRANES.

Features

The hoist is suspended from the traveling rail (I-beam) fixed to the building ceiling rafters.
Because the traveling rail location and span can be freely chosen, the crane can be designed to suit production line processes.
The detachable design for the track wheel and its axle reduces installation and maintenance time.
A dual-speed type, as well as a urethane wheel type, is available to reduce travel noise and vibration.

Specifications & Dimensions

Single Girder Low-head Traveling Cranes

The low-head crane is suspended from the traveling rail (I-beam) which is fixed to the ceiling rafters of the building.

Single Speed Crane: This crane employs geared motors specially designed by KITO to ensure smooth starts and stops. It is suited for general work.
Dual Speed Crane: This crane is capable of push button-controlled speed shift between low and high speed (reduction ratio of 4:1). It is suited for work requiring varied speed operation.
Manual Geared Type Crane: This manual geared type crane balances travel smoothly by synchronizing the driving wheels on both sides. With a relatively shorter travel distance, it is suited for low frequency work.
Manual Plain Type (Low-head Only): This is the simplest manual type of crane and lifting and traveling are operated by hand. It is suited for light work.

Urethane Wheel Type Low-head Traveling Crane (Single Girder)

There is a urethane wheel type crane that effectively reduces noise and vibration in travel. It is recommended for factories near residential areas, duplex office-homes and for operation at night. Running urethane wheels on the top flange of the H-beam reduces noise and vibration in travel with these cranes, it is not necessary to install a light rail thus reducing on installation costs and time.

Options

Control Boxes

This control box includes a built-in electromagnetic contactor and a transformer with a control voltage of 24V, with other control voltages optionally available. All models come equipped starndard with an emergency stop device.

Softrun Device

This device electrically controls the motor speed, allowing smooth acceleration in travel and minimizing load swing on start-up. Perfect for handling high inertia loads or operating long span cranes.

Cable Hangers

Hangers of various types are available depending on the purpose of use.

The post KITO Low-head Cranes first appeared on Kouei Japan Trading | Get Quotation.

KITO Overhead Cranes

kvtpart — Tue, 30 Oct 2018 07:10:24 +0000

Product Made in Japan
Manufacturer: KITO

Prioritizing every industrial workplace – KITO CRANES.

Features

This has a relatively large capacity and can utilize space below ceiling rafters, and so a wider lifting range is assured.
Guiding the path using side rollers ensures smooth travel, while the girders can be designed according to the rated load and span.
The shorter overall end carriage length and installation of the the geared motor in an optimum position allows the work space to be used more effectively.
A dual-speed type, as well as a urethane wheel type, is available to reduce travel noise and vibration.

Specifications & Dimensions

Single Girder Overhead Traveling Cranes

The single girder overhead crane can be installed on traveling rails on the brackets of building pillars.

Single Speed Crane: This crane employs geared motors specially designed by KITO to ensure smooth starts and stops. It is suited for general work.
Dual Speed Crane: This crane is capable of push button-controlled speed shift between low and high speed (reduction ratio of 4:1). It is suited for work requiring varied speed operation.
Manual Geared Type Crane: This manual geared type crane balances travel smoothly by synchronizing the driving wheels on both sides. With a relatively shorter travel distance, it is suited for low frequency work.

Double Girder Overhead Traveling Cranes

This double girder overhead crane can be installed on traveling rails on the brackets of building pillars. The double rail type trolley runs along parallel girders suitable for larger capacity cranes, and also can utilize space below ceiling rafters, and so a wider lifting rage assured.

Single Speed Crane: This crane employs geared motors specially designed by KITO to ensure smooth starts and stops. It is suited for general work.
Dual Speed Crane: This crane is capable of push button-controlled speed shift between low and high speed (reduction ratio of 4:1). It is suited for work requiring varied speed operation.

Urethane Wheel Type Overhead Traveling Crane (Single/Double Girder)

Options

Control Boxes

Softrun Device

This device electrically controls the motor speed, allowing smooth acceleration in travel and minimizing load swing on start-up. Perfect for handling high inertia loads or operating long span cranes.

Cable Hangers

Hangers of various types are available depending on the purpose of use.

The post KITO Overhead Cranes first appeared on Kouei Japan Trading | Get Quotation.

KITO Type K Wire Rope Hoists With Motorized Traversing Hoist / Suspended Hoist / Stationary Hoist /Push Button Control

kvtpart — Tue, 30 Oct 2018 07:00:24 +0000

Product Made in Japan
Manufacturer: KITO
Model: Type K

Higher quality for more efficient lifting work and saving on labor

Features

Wire hoist – Versatile, reliable and environment-user-friendly
Offers a diverse array of products so you can select the one best suited to your needs
Make your lifting work and labor more efficient, while streamlining operations.

Capacity	5 to 45 t
Use	Lifting Up/Down, Traversing Left/Right
Voltage	200V (50/60Hz), 220V (60Hz), 380V (50Hz), 415V (50Hz), 440V (60Hz)

Technical Characteristics

Standard Specification

Voltage	200V (50/60Hz), 220V (60Hz), 380V (50Hz), 415V (50Hz), 440V (60Hz)	Applicable Standard	JIS C 9620 Electric Hoist / Crane Structure Standard
Control Voltage	200V for 200V (50/60Hz), 220V (60Hz) 48V for 380V (50Hz), 415V (50Hz), 440V (60Hz)	Coating Color	Body: Dark Green (Equivalent to Munsell No. 10Y4/4) Hook Block: Munsell 7.5YR7/14 Push Button: Equivalent to Munsell 7.5YR7/13
Duty Cycle	30 min. (JIS C 9620)	Operating Temperature	-5 to 40℃ (-23 to 104℉)
Protective Construction	Simplified Outdoor Type (JIS C 0920, IP44)	Operating Humidity	90%RH or Less

High Frequency Use

Industry-leading frequency and lifting speed.

Specifications & Dimensions

Regular Motorized Traversing Hoist

This hoist traverses on the rail by motorized trolley. (Most universally used)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
KM050HH08	5	6.7/8	6.2-4/7.5-4	21/25	0.85-4/1.0-4
KM075HH08	7.5	5.8/7	8.3-4/10-4	12/15	0.85-4/1.0-4
KM100HH08	10	5/6	10-6/12-6		1.5-4/1.8-4
KM150HH08	15	5/6	17-6/20-6		0.85-4 ×2 /1.0-4 × 2
KM200HH12	20	4.2/5	17-6/20-6		1.5-4 ×2 /1.8-4 × 2

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
KM050HH08	646	830	410	8000	766
KM075HH08	669	1004	458		903
KM100HH08	719	959	493		988
KM150HH08	799	1085	558		1268
KM200HH12	999	1235	583	12000	1398

Low-head Motorized Traversing Hoist

At the upper limit, the headroom (the distance between the outer bottom of the rail and the hook center) is minimized. (Suitable for a place with low ceiling)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
KD050HH08	5	6.7/8	6.2-4/7.5-4	21/25	0.85-4/1.0-4
KD075HH08	7.5	5.8/7	8.3-4/10-4	12/15	0.85-4/1.0-4
KD100HH08	10	5/6	10-6/12-6	12/15	1.5-4/1.8-4

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
KD050HH08	646	830	518	8000	676
KD075HH08	669	1004	536		741
KD100HH08	719	959	619		873

Double Rail Motorized Traversing Hoist

The hoist traverses on the double rails of the overhead crane. (Stable running and often used for large capacity)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
KR050HH08	5	6.7/8	6.2-4/7.5-4	21/25	0.5-4/0.6-4
KR075HH08	7.5	5.8/7	8.3-4/10-4	15/18	0.85-4/1.0-4
KR100HH08	10	5/6	10-6/12-6		0.85-4/1.0-4
KR150HH08	15	5/6	17-6/20-6		1.5-4/1.8-4
KR200HH12	20	4.2/5	17-6/20-6		1.5-4/1.8-4

Dimensions (mm)

※Major capacities example

Code	A	B	C	P
KR050HH08	646	830	900	8000
KR075HH08	669	1004	950
KR100HH08	719	959	950
KR150HH08	799	1085	1000
KR200HH12	999	1235	1300	12000

Suspended Hoist

This hoist only lifts and lowers a load without traversing fixed to the ceiling.

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Approximate Mass (kg)
KK050H08	5	6.7/8	6.2-4/7.5-4	510
KK075H08	7.5	5.8/7	8.3-4/10-4	650
KK100H08	10	5/6	10-6/12-6	1000
KK150H08	15	5/6	17-6/20-6	1400
KK200H12	20	4.2/5	17-6/20-6	1900

This hoist only lifts and lowers a load without traversing fixed to the ceiling.

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
KK050H08	646	920	410	8000	546
KK075H08	669	1004	458		600
KK100H08	719	959	493		660
KK150H08	799	1085	558		845
KK200H12	999	1235	583	12000	935

Stationary Hoist

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Approximate Mass (kg)
KS050H08	5	6.7/8	6.2-4/7.5-4	510
KS075H08	7.5	5.8/7	8.3-4/10-4	650
KS100H08	10	5/6	10-6/12-6	1000
KS150H08	15	5/6	17-6/20-6	1400
KS200H12	20	4.2/5	17-6/20-6	1900

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
KS050H08	646	920	410	8000	90
KS075H08	669	1004	493		100
KS100H08	719	959	533		120
KS150H08	799	1085	633		130
KS200H12	999	1235	663	12000	140

The post KITO Type K Wire Rope Hoists With Motorized Traversing Hoist / Suspended Hoist / Stationary Hoist /Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO Type F Wire Rope Hoists With Motorized Traversing Hoist / Suspended Hoist / Push Button Control

kvtpart — Tue, 30 Oct 2018 06:47:54 +0000

Product Made in Japan
Manufacturer: KITO
Model: Type F

Higher quality for more efficient lifting work and saving on labor

Features

Wire hoist – Versatile, reliable and environment-user-friendly
Offers a diverse array of products so you can select the one best suited to your needs
Make your lifting work and labor more efficient, while streamlining operations.

Capacity	1 to 3 t
Use	Lifting Up/Down, Traversing Left/Right
Voltage	200V (50/60Hz), 220V (60Hz), 380V (50Hz), 415V (50Hz), 440V (60Hz)

Technical Characteristics

Standard Specification

Voltage	200V (50/60Hz), 220V (60Hz), 380V (50Hz), 415V (50Hz), 440V (60Hz)	Applicable Standard	JIS C 9620 Electric Hoist / Crane Structure Standard
Control Voltage	200V for 200V (50/60Hz), 220V (60Hz) 48V for 380V (50Hz), 415V (50Hz), 440V (60Hz)	Coating Color	Body: Dark Green (Equivalent to Munsell No. 10Y4/4) Hook Block: Munsell 7.5YR7/14 Push Button: Equivalent to Munsell 7.5YR7/13
Duty Cycle	30 min. (JIS C 9620)	Operating Temperature	-5 to 40℃ (-23 to 104℉)
Protective Construction	Simplified Outdoor Type (JIS C 0920, IP44)	Operating Humidity	90%RH or Less

Medium Frequency Use

A simple, economical, and high-performance hoist.
One-grade superiority provides the power and economy of a major hoist.4

Specifications & Dimensions

Regular Motorized Traversing Hoist

This hoist traverses on the rail by motorized trolley. (Most universally used)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
FM010HH06	1	6.7/8	1.2-4/1.4-4	21/25	0.22-4/0.26-4
FM020HH06	2	6/7.2	2.2-4/2.6-4		0.5-4/0.6-4
FM030HH06	3	6/7.2	3.2-4/3.9-4		0.5-4/0.6-4

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
FM010HH06	283	468	347	6000	535
FM020HH06	284	532	368		585
FM030HH06	343	565	393		649

Low-head Motorized Traversing Hoist

At the upper limit, the headroom (the distance between the outer bottom of the rail and the hook center) is minimized. (Suitable for a place with low ceiling)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
FD010HH06	1	6.7/8	1.2-4/1.4-4	21/25	0.22-4/0.26-4
FD020HH06	2	6/7.2	2.2-4/2.6-4		0.5-4/0.6-4
FD030HH06	3	6/7.2	3.2-4/3.9-4		0.5-4/0.6-4

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
FD010HH06	426	583	418	6000	495
FD020HH06	415	656	465		572
FD030HH06	437	695	478		619

Double Rail Motorized Traversing Hoist

The hoist traverses on the double rails of the overhead crane. (Stable running and often used for large capacity)

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Traversing Speed (m/min) 50/60Hz	Traversing Motor (kW-P) 50/50Hz
FR030HH06	3	6/7.2	3.2-4/3.9-4	21/25	0.5-4/0.6-4

Dimensions (mm)

※Major capacities example

Code	A	B	C	P
FR030HH06	437	695	650	6000

Suspended Hoist

This hoist only lifts and lowers a load without traversing fixed to the ceiling.

Specifications

※Major capacities example

Code	Capacity (t)	Lifting Speed (m/min) 50/60Hz	Lifting Motor (kW-P) 50/60Hz	Approximate Mass (kg)
FK010H06	1	6.7/8	1.2-4/1.4-4	120
FK020H06	2	6/7.2	2.2-4/2.6-4	170
FK030H06	3	6/7.2	3.2-4/3.9-4	260

Dimensions (mm)

※Major capacities example

Code	A	B	C	P	R
FK010H06	283	468	347	6000	363
FK020H06	284	532	368		388
FK030H06	343	565	393		457

The post KITO Type F Wire Rope Hoists With Motorized Traversing Hoist / Suspended Hoist / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO RYL Wire Rope Hoists With Motorized Traversing Hoist / Push Button Control

kvtpart — Tue, 30 Oct 2018 06:37:36 +0000

Product Made in Japan
Manufacturer: KITO
Model: RYL

Features

RY Series is equipped with technologies and know-how accumulated through KITO’s experience with electric chain hoists.
Minimizes the swing of a load with KITO’s “original inverter control”
Equipped with a proven pull rotor type motor brake to ensure a high level of safety
Adopts aluminum casing to reduce weight

Capacity	2.8 to 5 t
Use	Lifting Up/Down, Traversing Left/Right
Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)

Technical Characteristics

Standard Specification

Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)	Operation Method	Push Button Control (Floor Operation)
Intermittent Ratings	Lifting: 60%ED (High Speed: 40%, Low Speed: 20%) 360 Starts/hr	Enclosure	Hoist Body: IP44, Push Button Control: IP65
Control Voltage	DC 24V	Operating Temperature	-20～+40℃
Power Supply Method	Power Supply through Cabtyre Cable	Operating Humidity	90%RH or Less (No Condensation)

Equipped with Technologies and Know-how Accumulated through KITO’s Experience with Electric Chain Hoists.

Minimizes the Swing of a Load with KITO’s “Original Inverter Control”

Equipped with a Proven Pull Roter Type Motor Brake to Ensure a High Level of Safety

Adopts Aluminum Casing to Reduce Weight

Specifications & Dimensions

Low Headroom Type (RYL)

Lifting up/down and Traversing are equipped inverter as standard.

Specifications

※Major capacities example

Code	Capacity (t)	Std. Lift (m)	Lifting: Inverter Operation		Traversing: Inverter Operation
Code	Capacity (t)	Std. Lift (m)	Output (kW)	High and Low Speed with a Rated Load m/s (m/min)	Output (kW)	High and Low Speed m/s (m/min)
RYLA030ISIS06	3.0	6	3.5	0.083 to 0.014 (5.0 to 0.833)	0.25	0.33 to 0.056 (20 to 3.3)
RYLA030IHIS06		6	5.0	0.133 to 0.022 (8.0 to 1.333)
RYLA030ISIS09		9	3.5	0.083 to 0.014 (5.0 to 0.833)
RYLA030IHIS09		9	5.0	0.133 to 0.022 (8.0 to 1.333)
RYLA030ISIS12		12	3.5	0.083 to 0.014 (5.0 to 0.833)
RYLA030IHIS12		12	5.0	0.133 to 0.022 (8.0 to 1.333)
RYLB050ISIS09	5.0	9	5.0	0.083 to 0.014 (5.0 to 0.833)	0.4
RYLB050IHIS09		9	8.0	0.133 to 0.022 (8.0 to 1.333)
RYLB050ISIS12		12	5.0	0.083 to 0.014 (5.0 to 0.833)
RYLB050IHIS12		12	8.0	0.133 to 0.022 (8.0 to 1.333)

We are scheduling to release over 10 t. Please consult with KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code	Capacity (t)	Std. Lift (m)	Flange Width B (mm)	C	d	e	o	p
RYLA030ISIS06 RYLA030IHIS06	3.0	6	125 to 175	635	357	710	441	649 to 599
			176 to 350					773 to 599
			351 to 500					748 to 599
RYLA030ISIS09 RYLA030IHIS09		9	125 to 175			922		649 to 599
			176 to 350					773 to 599
			351 to 500					748 to 599
RYLA030ISIS12 RYLA030IHIS12		12	125 to 175			1134		649 to 599
			176 to 350					773 to 599
			351 to 500					748 to 599
RYLB050ISIS09 RYLB050IHIS09	5.0	9	125 to 175	650		922		649 to 599
			176 to 350					773 to 599
			351 to 500					748 to 599
RYLB050ISIS12 RYLB050IHIS12		12	125 to 175			1134		649 to 599
			176 to 350					773 to 599
			351 to 500					748 to 599

The post KITO RYL Wire Rope Hoists With Motorized Traversing Hoist / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO RES/RESM Electric Chain Hoists – Application-oriented Models

kvtpart — Thu, 25 Oct 2018 03:15:23 +0000

Product Made in Japan
Manufacturer: KITO
Model: RES/RESM

The RES series is recommended for use in explosive atmospheres featuring various ignitable gases and vapors, where special attention is required.

Features

The hoists have been authorized with type approval by the Ministry of Health, Labor and Welfare in Japan.
Explosion class and ignition temperature category for ambient gas or steam: ‘d2 G4’

Explosion- Protected Construction	Motor (for Lifting & Traversing), Control Box, Push Button Switch, Motor (for Traversing), Terminal Box
Cable Entry	Pressure-Proof Packing Construction, Rubber Insulated Flexible Cable (3RNCT)
Useful Place	Factory, Business Facility (Not Use at Mining)

Technical Characteristics

Standard Specification

Voltage	220V (50/60Hz), 220V (60Hz), 380V (50Hz), 400V (50Hz), 440V (50Hz), 415V (50Hz), 440V (60Hz), 3 Phase *Other voltages are available upon your request.	Motor Insulation	Class E
		Operation Method	Push Button Control (Floor Operation)
		Power Supply Method	Cable Power Supply System
		Operating Temperature	-20 to 40℃ (-4 to 104℉)
Control Voltage	48V	Operating Humidity	85%RH or Less

Specifications & Dimensions

With Hook Suspension

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	60Hz	Net Weight (kg)
RES005S	1/2	3	1.5	8.0	10.0	100
RES010S	1		1.5	6.9	8.3	100
RES020S	2		3.0	6.6	7.9	147
RES030S	3			4.3	5.2	165
RES050S	5			2.6	3.2	175

Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.

Dimensions (mm)

※Major capacities example

Code	Minimum Distance between Top and Bottom Hooks: C	D	d	e	f
RES005S	650	770	265	340	358
RES010S	590	770	265	340	358
RES020S	735	870	304	375	470
RES030S	895	935			470
RES050S	930	1040			482

In case of 7.5 ton and over capacities, trolley combined types are standard.
Dimensions of D show the data for the hoist with standard length of lift.
In case of 10 ton and over capacities, 2-hoist body construction is standard.

With Motorized Trolly

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Trav. Motor	Traversing Speed (m/min)		Standard I-Beam Width:B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	60Hz	Standard I-Beam Width:B (mm)
RESM005S-S	1/2	3	0.4	10 or 20	12 or 24	58-125
RESM010S-S	1					58-125
RESM020S-S	2					100-150
RESM030S-S	3		0.75			100-150
RESM050S-S	5		0.75			125-175

Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.
Data for lifting motor , lifting speed, load chain and test for RESM are the same data for RES.

Dimensions (mm)

※Major capacities example

Code	Minimum Distance between Top and Bottom Hooks: C	D	b	d	e
RESM005S-S	640	760	315	320	515
RESM010S-S	580	760	315	320
RESM020S-S	705	840	325	324
RESM030S-S	870	910	340	326	520
RESM050S-S	925	935	400	333	525

Dimensions of D show the data for the hoist with standard lift.

The post KITO RES/RESM Electric Chain Hoists – Application-oriented Models first appeared on Kouei Japan Trading | Get Quotation.

KITO SHER2M Electric Chain Hoists – Application-oriented Models

kvtpart — Thu, 25 Oct 2018 03:06:01 +0000

Product Made in Japan
Manufacturer: KITO
Model: SHER2M

Optimal for installations in buildings with low ceilings or to maximize effective lift

Features

The KITO ultra-low headroom electric chain hoist is uniquely designed to have a shorter headroom than standard ER2 configurations, with trolleys also optionally available. For special requirements such as rated capacities exceeding 10 ton, dual-speed or curve beams, please consult with KITO and KITO’s global partners.

Specifications & Dimensions

Ultra Low Headroom

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed (m/min)		Trav. Motor	Traversing Speed (m/min)		Flange Width: B (mm)
Code	Cap. (t)	Std. Lift (m)	Output (kW)	50Hz	60Hz	Output (kW)	50Hz	60Hz	Flange Width: B (mm)
SHER2M003S	250kg	3	0.56	9.1	11.0	0.4	20 (10)	24 (12)	75-125
SHER2M005S	500kg		0.9	7.3	8.8				75-125
SHER2M010S	1		1.8	7.1	8.5				100-125
SHER2M020S	2		3.5	5.7	6.8				125-150
SHER2M030S	3		3.5	3.5	4.2				125-150

The bracketed figures in Traversing Speed are low speed.
This product is designed for straight beams.
Specify a beam width at the time of quotation or order.
The following information will be provided upon your request:
1) Availability of curve beams
2) Availability of a flange width exceeding the maximum

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e	g
SHER2M003S	265	430	656 (616)	219	259	27
SHER2M005S	285	520	706 (666)	242	268	27
SHER2M010S	345	540	734 (694)	291	307	31
SHER2M020S	475	830	846 (823)	337	399	39
SHER2M030S	610	840	892 (884)	347	356	44

The brackted in Size “b” are for geared or plain trolley.
Size “D” is for a lift of 4 m.
This information which varies depending on the lift is provided upon your request.

The post KITO SHER2M Electric Chain Hoists – Application-oriented Models first appeared on Kouei Japan Trading | Get Quotation.

KITO ED/EDL/EDC/EDCL Electric Chain Hoists With Hook Suspension / Push Botton Control / Cylinder Control

kvtpart — Thu, 25 Oct 2018 02:53:03 +0000

Product Made in Japan
Manufacturer: KITO
Model: ED/EDL/EDC/EDCL

Compact, light, easy, and fast

Features

High-speed lifting/lowering
Compact design minimizes headroom
Powerful and high-performance
High-performance mechanical brake
Compact and lightweight. The 100 kg standard lift type weighs just 11.5 kg.

Capacity	60 to 480 kg (Push Button Control), 60 to 240 kg (Cylinder Control)
Standard Lift	3 m (Push Botton Control), 1.8 m (Cylinder Control)
Use	Lifting Up/Down
Voltage	1 Phase AC 120V or 240V
Ratings	Hoist-IP54, Push Button Control-IP65, Cylinder Control-IP44

Technical Characteristics

Standard Specification

Voltage	1 Phase AC 120V or 240V both for 50Hz and 60Hz	Operation Method	Push Button Control (Floor Operation) Cylinder Type
Motor Insulation	Class F	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Enclosure	IP54	Operating Humidity	85%RH or Less

Lightweight, high-speed, adaptable, and portable. The ED series is technologically advanced, easy to service, and high quality.

Compact Design

The die-cast aluminum body is lightweight, with low headroom, to fit confined spaces. Easy to install, move and store.

Dual-braking System

The dual-braking system includes both mechanical and regenerative brakes for added safety.

Heavy-duty Motor

With 300 to 600W, the unit offers above-average motor output for industrial applications, while a compact DC motor with AC current rectifier reduces weight, generates less heat and maintains duty cycles.

High-performance Friction Clutch

The friction clutch, built into the load brake, is designed to slip to prevent overwinding or overloading.

Upper Limit Switch

Prevents overwinding and sets a standard upper limit.

Abrasion-resistant, Case-hardened, and Plated Chain

Made from heat-treated alloy steel for high, uniform strength and corrosion resistance.

Heat-treated Gearing

The deep-groove ball and needle bearings are immersed in an oil bath resulting in smooth, quiet operation.

Speed Flexibility (Dual Speed / Cylinder Control Model)

The low speed can be adjusted from 0 to 100% of maximum speed by setting a screw inside the push button switch.

In-line Handgrip (Cylinder Control Model)

Allows one-handed operation and gives the operator a free hand to easily position the load.

High/Low Speeds (Cylinder Control Model)

The easy-touch rocker switch above the handgrip allows the user to swiftly change between low and high-speed control, while the finger-turn knobs allow custom speed setting from 0–100%.

Removable Bottom Hook (Cylinder Control Model)

Allows insertion of various below-the-hook material handling devices.

Specifications & Dimensions

Single Speed with Hook Suspension, Standard Voltage

The single speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	High	Low	Net Weight (kg)
ED06S	60	3	2.5	300	21	–	11.5
ED10S	100				13
ED18S	180				8
ED16S	160			600	20		15.5
ED24S	240			600	13.5		15.5

Power supply cable 2 ㎟ × 3 conductors × 5 m with grounding wire.
The lifting speed is the average of the lifting/lowering speed under the rated load. The speed will vary in a load or voltage.
Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
ED06S	315	187	184 (177)*	205	340
ED10S
ED18S
ED16S	330	205	223	219	362
ED24S	330	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Single Speed with Hook Suspension, Low Voltage Control 30V

The single speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	High	Low	Net Weight (kg)
EDL06S	60	3	2.5	300	21	–	12
EDL10S	100				13
EDL18S	180				8
EDL16S	160			600	20		16
EDL24S	240			600	13.5		16

Power supply cable 2 ㎟ × 3 conductors × 5 m with grounding wire.
The lifting speed is the average of the lifting/lowering speed under the rated load. The speed will vary in a load or voltage.
Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
EDL06S	315	187	184 (177)*	205	340
EDL10S
EDL18S
EDL16S	330	205	223	219	362
EDL24S	330	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Dual Speed with Hook Suspension, Standard Voltage

The dual speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (t)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	High	Low	Net Weight (kg)
ED06ST	60	3	2.5	300	21	4	12
ED10ST	100				13	3
ED18ST	180				8	3
ED16ST	160			600	20	4	16
ED24ST	240			600	13.5	3	16

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
ED06ST	315	187	184 (177)*	205	340
ED10ST
ED18ST
ED16ST	330	205	223	219	362
ED24ST	330	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Dual Speed with Hook Suspension, Low Voltage Control 30V

The dual speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (kg)	Standard Lift (m)	Push Button Code:L (m)	Motor Output (W)	High	Low	Net Weight (kg)
EDL06ST	60	3	2.5	300	21	4	12.5
EDL10ST	100				13	3
EDL18ST	180				8	3
EDL16ST	160			600	20	4	16.5
EDL24ST	240			600	13.5	3	16.5

Power supply cable 2 ㎟ × 3 conductors × 5 m with grounding wire.
The lifting speed is the average of the lifting/lowering speed under the rated load. The speed will vary in a load or voltage.
Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
EDL06ST	315	187	184 (177)*	205	340
EDL10ST
EDL18ST
EDL16ST	330	205	223	219	362
EDL24ST	330	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Cylinder Control, Dual Speed with Hook Suspension, Standard Voltage

The dual speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (kg)	Standard Lift (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (kg)	Standard Lift (m)	Motor Output (W)	High	Low	Net Weight (kg)
EDC06SD	60	1.8	300	21	4	14.5
EDC10SD	100			13	3
EDC18SD	180			8	3
EDC16SD	160		600	20	4	18.5
EDC24SD	240		600	13.5	3	18.5

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
EDC06SD	945	187	184 (177)*	205	340
EDC10SD
EDC18SD
EDC16SD	960	205	223	219	362
EDC24SD	960	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Cylinder Control, Dual Speed with Hook Suspension, Low Voltage Control 30V

The dual speed delivers high speed and contribute operation efficiency.

Specifications

※Major capacities example

Code	Capacity (kg)	Standard Lift (m)	Motor Output (W)	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (kg)	Standard Lift (m)	Motor Output (W)	High	Low	Net Weight (kg)
EDCL06SD	60	1.8	300	21	4	15
EDCL10SD	100			13	3
EDCL18SD	180			8	3
EDCL16SD	160		600	20	4	19
EDCL24SD	240		600	13.5	3	19

Power supply cable 2 ㎟ × 3 conductors × 5 m with grounding wire.
The lifting speed is the average of the lifting/lowering speed under the rated load. The speed will vary in a load or voltage.
Capacity indicates maximum load (working load limit) which a hoist is designed to support in general service.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	d	e	f	k
EDCL06SD	945	187	184 (177)*	205	340
EDCL10SD
EDCL18SD
EDCL16SD	960	205	223	219	362
EDCL24SD	960	205	223	219	362

In case of with mini trolley, dimensions “C” and “K” are shorter by 45 mm.

* Figures in parentheses show the data for 240V (max).

Options

Chain Spring

Recommended when using the upper limit switch.

Mini Trolley TMH25 for 60 to 240 kg

Fits ED models up to 240 kg capacity.

Trolley for Max. 480 kg

For ED 480 kg capacity use the TSP005 trolley or TSG005 trolley

The post KITO ED/EDL/EDC/EDCL Electric Chain Hoists With Hook Suspension / Push Botton Control / Cylinder Control first appeared on Kouei Japan Trading | Get Quotation.

KITO EQSG Electric Chain Hoists With Geared Trolley / Push Button Control

kvtpart — Thu, 25 Oct 2018 02:43:23 +0000

Product Made in Japan
Manufacturer: KITO
Model: EQSG

Ultimate lightweight and compact size, meticulous and dedicated design

Features

Integrated body protecting the high-performance and highly functional unit
The combination of idea and technology materialize in a lightweight size.
– Meticulous inverter-dedicated design
A dual-safety mechanism prevents accidents from excessive loads.
– Equipped with a friction clutch and electronic overload limiter.
Smooth and ergonomic operation
Shuts off motor current during excessive lifting/lowering to prevent accidents.
Meticulous long-life design
Suitable for severe environments and working conditions – Simple design with Grade M6 – High-end duty rating with unique motor frame fins and fan cover
World-class KITO original chain – Superstrong nickel-plated load chain
Visual indication of maintenance timing
Shuts off the motor circuit in case of emergency.
Higher inspector work efficiency – Easier maintenance
Environmentally friendly

Capacity	125 kg to 1 t (Dual Speed Only)
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-460V (50/60Hz)

Technical Characteristics

Standard Specification

Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)	Classification	1 t: M5 (ISO/JIS), 2 m (FEM), H4 (ASME)
Control Voltage	DC24V	Classification	125 to 500 kg: M6 (ISO/JIS), 3 m (FEM), H4 (ASME)
Duty Rating	40/20% ED	Operation Method	Push Button Control (Floor Operation)
Motor Insulation	Class B	Operating Temperature	-20 to 40 ℃ (-4 to 104℉)
Enclosure	Hoist Body: IP55, Push Button Control: IP65	Operating Humidity	85%RH or Less

Safe and Durable Structure with Easier Maintenance

The Integrated Body Protects the High Performance Capabilities and Functions of the Hoist

Outstanding rigidity, effectively dustproof and waterproof, and suitable for severe environments and working conditions
No-load high-speed function
Simply structure and integrated body with few component parts
Dustproof and jetproof body (IP55)

The Combination of Idea and Technology Materialize in a Lightweight Size – Meticulous Inverter-dedicated Design

Fully miniaturized mechanical parts incorporating inverter-based smooth start and stop
Transformer-free structure based on inverter DC power
Thermal protector-free structure based on the electronic thermal system

A Dual-safety Mechanism Prevents Accidents from Excessive Loads – Equipped with a Friction Clutch and Electronic Overload Limiter

The friction clutch prevents the hoist body and load chain from breaking in the event of an abnormal load, e.g. overload and lifting anchored objects.
The electronic overload limiter detects overload with the inverter and stops operation immediately.

Smooth and Ergonomic Operation

A No-load high-speed function comes as standard, allowing a hoisting speed 1.3 times faster during no-load operation. When the no-load condition is detected by the inverter, this function is activated automatically to switch to high-speed operation; easily and safely boosting work efficiency. This function is easily activated (ON/OFF) with the push button control.

Shuts Off Motor Current during Excessive Lifting/Lowering to Prevent Accidents

The upper-lower limit switch prevents damage to the hoist body and load chain during excessive lifting/lowering.
The simple structure of the upper-lower limit switch reduces dead space

Meticulous Long-life Design – Suitable for Severe Environments and Working Conditions – Simple Design with Grade M6 – High-end Duty Rating with Unique Fan-cooled Motor

The EQ achieves M6 (ISO)/3 m (FEM) class (refer to “Hoist Classifications” section), with a duty cycle of 40/20% ED. Supporting use in the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high frequency or long-lift operations. The gearbox is lubricated in an oil bath for improved resistance to wear and tear and enhanced cooling, while a unique fan-cooled motor, featuring frame fins and a fan cover, have been configured in a purpose-built design; resulting in a far quieter motor unit and enhanced fan cooling capabilities.

World-class KITO Original Chain – Superstrong Nickel-plated Load Chain

Highly enhanced fatigue and wear resistance due to ingenious technology
Special alloy steel quenched chain: exceptionally strong, durable and accurate

Visual Indication of Maintenance Timing

Capable of showing the number of starts and cumulative hours of operation for the hoist in the data display, allowing maintenance and inspection according to the frequency of use
Capable of controlling inspection and replacement timings for component parts, etc., to suggest a maintenance plan for safe operation

Shutting Off the Motor Circuit in Case of Emergency

Capable of shutting off the motor circuit at hand by pressing the emergency stop button
Originally designed easy-to-operate push button switch based on ergonomics
24V DC operating voltage for higher safety

Higher Inspector Work Efficiency – Easier Maintenance

Easily remove suspension eyes by installing a connecting shaft at the upper part of the body
Centralized inverter control minimizes the number of electric parts and equipment and replacement parts.

Environmentally Friendly

Free of 15 environmentally hazardous substances specified by KITO, including six European RoHS directive substances
Low-noise during operation and braking due to a 4-pole motor and pull-rotor brake

Specifications & Dimensions

Dual Speed ‘Inverter’ with Geared Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Flange Width: B (mm)	Net Weight (kg)
			Lifting Motor	50/60Hz			Flange Width: B (mm)
			Output (kW)	High	Low	No Load High Speed	Standard
EQSG001IS	125kg	3	0.5	17.0	2.8	22.1	58-127	44
EQSG003IS	250kg		0.5	10.0	1.7	13.0		45
EQSG005IS	500kg		0.75	7.6	1.3	9.9		47
EQSG010IS	1		1.5	7.0	1.2	9.2		56

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	e	m
EQSG001IS	425	515	236	338	56
EQSG003IS	425
EQSG005IS	440
EQSG010IS	490	565

The post KITO EQSG Electric Chain Hoists With Geared Trolley / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO EQSP Electric Chain Hoists With Plain Trolley / Push Button Control

kvtpart — Thu, 25 Oct 2018 02:36:54 +0000

Product Made in Japan
Manufacturer: KITO
Model: EQSP

Ultimate lightweight and compact size, meticulous and dedicated design.

Features

Integrated body protecting the high-performance and highly functional unit
The combination of idea and technology materialize in a lightweight size.
– Meticulous inverter-dedicated design
A dual-safety mechanism prevents accidents from excessive loads.
– Equipped with a friction clutch and electronic overload limiter.
Smooth and ergonomic operation
Shuts off motor current during excessive lifting/lowering to prevent accidents.
Meticulous long-life design
Suitable for severe environments and working conditions – Simple design with Grade M6 – High-end duty rating with unique motor frame fins and fan cover
World-class KITO original chain – Superstrong nickel-plated load chain
Visual indication of maintenance timing
Shuts off the motor circuit in case of emergency.
Higher inspector work efficiency – Easier maintenance
Environmentally friendly

Capacity	125 kg to 1 t (Dual Speed Only)
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-460V (50/60Hz)

Technical Characteristics

Standard Specification

Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)	Classification	1 t: M5 (ISO/JIS), 2 m (FEM), H4 (ASME)
Control Voltage	DC24V	Classification	125 to 500 kg: M6 (ISO/JIS), 3 m (FEM), H4 (ASME)
Duty Rating	40/20% ED	Operation Method	Push Button Control (Floor Operation)
Motor Insulation	Class B	Operating Temperature	-20 to 40 ℃ (-4 to 104℉)
Enclosure	Hoist Body: IP55, Push Button Control: IP65	Operating Humidity	85%RH or Less

The Integrated Body Protects the High Performance Capabilities and Functions of the Hoist

Outstanding rigidity, effectively dustproof and waterproof, and suitable for severe environments and working conditions
No-load high-speed function
Simply structure and integrated body with few component parts
Dustproof and jetproof body (IP55)

The Combination of Idea and Technology Materialize in a Lightweight Size – Meticulous Inverter-dedicated Design

Fully miniaturized mechanical parts incorporating inverter-based smooth start and stop
Transformer-free structure based on inverter DC power
Thermal protector-free structure based on the electronic thermal system

A Dual-safety Mechanism Prevents Accidents from Excessive Loads – Equipped with a Friction Clutch and Electronic Overload Limiter

The friction clutch prevents the hoist body and load chain from breaking in the event of an abnormal load, e.g. overload and lifting anchored objects.
The electronic overload limiter detects overload with the inverter and stops operation immediately.

Smooth and Ergonomic Operation

Shuts Off Motor Current during Excessive Lifting/Lowering to Prevent Accidents

The upper-lower limit switch prevents damage to the hoist body and load chain during excessive lifting/lowering.
The simple structure of the upper-lower limit switch reduces dead space

Meticulous Long-life Design – Suitable for Severe Environments and Working Conditions – Simple Design with Grade M6 – High-end Duty Rating with Unique Fan-cooled Motor

World-class KITO Original Chain – Superstrong Nickel-plated Load Chain

Highly enhanced fatigue and wear resistance due to ingenious technology
Special alloy steel quenched chain: exceptionally strong, durable and accurate

Visual Indication of Maintenance Timing

Capable of showing the number of starts and cumulative hours of operation for the hoist in the data display, allowing maintenance and inspection according to the frequency of use
Capable of controlling inspection and replacement timings for component parts, etc., to suggest a maintenance plan for safe operation

Shutting Off the Motor Circuit in Case of Emergency

Capable of shutting off the motor circuit at hand by pressing the emergency stop button
Originally designed easy-to-operate push button switch based on ergonomics
24V DC operating voltage for higher safety

Higher Inspector Work Efficiency – Easier Maintenance

Easily remove suspension eyes by installing a connecting shaft at the upper part of the body
Centralized inverter control minimizes the number of electric parts and equipment and replacement parts.

Environmentally Friendly

Free of 15 environmentally hazardous substances specified by KITO, including six European RoHS directive substances
Low-noise during operation and braking due to a 4-pole motor and pull-rotor brake

Specifications & Dimensions

Dual Speed ‘Inverter’ with Plain Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Flange Width: B (mm)	Net Weight (kg)
			Lifting Motor	50/60Hz			Flange Width: B (mm)
			Output (kW)	High	Low	No Load High Speed	Standard
EQSP001IS	125kg	3	0.5	17.0	2.8	22.1	50-102	34
EQSP003IS	250kg		0.5	10.0	1.7	13.0		34
EQSP005IS	500kg		0.75	7.6	1.3	9.9		36
EQSP010IS	1		1.5	7.0	1.2	9.2	58-127	49

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	e	m
EQSP001IS	415	505	182	46	47.5
EQSP003IS	415
EQSP005IS	430
EQSP010IS	490	565	236	56	56

The post KITO EQSP Electric Chain Hoists With Plain Trolley / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO EQM Electric Chain Hoists With Motorized Trolley / Push Button Control

kvtpart — Thu, 25 Oct 2018 02:25:27 +0000

Product Made in Japan
Manufacturer: KITO
Model: EQM

Ultimate lightweight and compact size, meticulous and dedicated design.

Features

Integrated body protecting the high-performance and highly functional unit
The combination of idea and technology materialize in a lightweight size.
– Meticulous inverter-dedicated design
A dual-safety mechanism prevents accidents from excessive loads.
– Equipped with a friction clutch and electronic overload limiter.
Smooth and ergonomic operation
Shuts off motor current during excessive lifting/lowering to prevent accidents.
Meticulous long-life design
Suitable for severe environments and working conditions – Simple design with Grade M6 – High-end duty rating with unique motor frame fins and fan cover
World-class KITO original chain – Superstrong nickel-plated load chain
Visual indication of maintenance timing
Shuts off the motor circuit in case of emergency.
Higher inspector work efficiency – Easier maintenance
Environmentally friendly

Capacity	125 kg to 1 t (Dual Speed Only)
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-460V (50/60Hz)

Technical Characteristics

Standard Specification

Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)	Classification	1 t: M5 (ISO/JIS), 2 m (FEM), H4 (ASME)
Control Voltage	DC24V	Classification	125 to 500 kg: M6 (ISO/JIS), 3 m (FEM), H4 (ASME)
Duty Rating	40/20% ED	Operation Method	Push Button Control (Floor Operation)
Motor Insulation	Class B	Operating Temperature	-20 to 40 ℃ (-4 to 104℉)
Enclosure	Hoist Body: IP55, Push Button Control: IP65	Operating Humidity	85%RH or Less

Safe and Durable Structure with Easier Maintenance

The Integrated Body Protects the High Performance Capabilities and Functions of the Hoist

Outstanding rigidity, effectively dustproof and waterproof, and suitable for severe environments and working conditions
No-load high-speed function
Simply structure and integrated body with few component parts
Dustproof and jetproof body (IP55)

The Combination of Idea and Technology Materialize in a Lightweight Size – Meticulous Inverter-dedicated Design

Fully miniaturized mechanical parts incorporating inverter-based smooth start and stop
Transformer-free structure based on inverter DC power
Thermal protector-free structure based on the electronic thermal system

A Dual-safety Mechanism Prevents Accidents from Excessive Loads – Equipped with a Friction Clutch and Electronic Overload Limiter

The friction clutch prevents the hoist body and load chain from breaking in the event of an abnormal load, e.g. overload and lifting anchored objects.
The electronic overload limiter detects overload with the inverter and stops operation immediately.

Smooth and Ergonomic Operation

Shuts Off Motor Current during Excessive Lifting/Lowering to Prevent Accidents

The upper-lower limit switch prevents damage to the hoist body and load chain during excessive lifting/lowering.
The simple structure of the upper-lower limit switch reduces dead space

Meticulous Long-life Design – Suitable for Severe Environments and Working Conditions – Simple Design with Grade M6 – High-end Duty Rating with Unique Fan-cooled Motor

World-class KITO Original Chain – Superstrong Nickel-plated Load Chain

Highly enhanced fatigue and wear resistance due to ingenious technology
Special alloy steel quenched chain: exceptionally strong, durable and accurate

Visual Indication of Maintenance Timing

Capable of showing the number of starts and cumulative hours of operation for the hoist in the data display, allowing maintenance and inspection according to the frequency of use
Capable of controlling inspection and replacement timings for component parts, etc., to suggest a maintenance plan for safe operation

Shutting Off the Motor Circuit in Case of Emergency

Capable of shutting off the motor circuit at hand by pressing the emergency stop button
Originally designed easy-to-operate push button switch based on ergonomics
24V DC operating voltage for higher safety

Higher Inspector Work Efficiency – Easier Maintenance

Easily remove suspension eyes by installing a connecting shaft at the upper part of the body
Centralized inverter control minimizes the number of electric parts and equipment and replacement parts.

Environmentally Friendly

Free of 15 environmentally hazardous substances specified by KITO, including six European RoHS directive substances
Low-noise during operation and braking due to a 4-pole motor and pull-rotor brake

SPECIFICATIONS & DIMENSIONS

Dual Speed ‘Inverter’ with Motorized Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Trav. Motor	Traversing Speed* (m/min)
			Lifting Motor	50/60Hz			Trav. Motor	50/60Hz
			Output (kW)	High	Low	No Load High Speed	Output (kW)	High	Low
EQM001IS-IS	125kg	3	0.5	17.0	2.8	22.1	0.4	24	4
EQM003IS-IS	250kg		0.5	10.0	1.7	13.0
EQM005IS-IS	500kg		0.75	7.6	1.3	9.9
EQM010IS-IS	1		1.5	7.0	1.2	9.2

The minimum radius curve may depend on flange width. For further information, contact KITO and KITO’s global partners.

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low and the traversing speeds are adjustable from 2.4 to 24.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e
EQM001IS-IS	420	515	315	220	515
EQM003IS-IS	420
EQM005IS-IS	440
EQM010IS-IS	490	565

The post KITO EQM Electric Chain Hoists With Motorized Trolley / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO EQ Electric Chain Hoists With Suspension Eye / Push Button Control

kvtpart — Thu, 25 Oct 2018 02:14:22 +0000

Product Made in Japan
Manufacturer: KITO
Model: EQ

Ultimate lightweight and compact size, meticulous and dedicated design

Features

Integrated body protecting the high-performance and highly functional unit
The combination of idea and technology materialize in a lightweight size.
– Meticulous inverter-dedicated design
A dual-safety mechanism prevents accidents from excessive loads.
– Equipped with a friction clutch and electronic overload limiter.
Smooth and ergonomic operation
Shuts off motor current during excessive lifting/lowering to prevent accidents.
Meticulous long-life design
Suitable for severe environments and working conditions – Simple design with Grade M6 – High-end duty rating with unique motor frame fins and fan cover
World-class KITO original chain – Superstrong nickel-plated load chain
Visual indication of maintenance timing
Shuts off the motor circuit in case of emergency.
Higher inspector work efficiency – Easier maintenance
Environmentally friendly

Capacity	125 kg to 1 t (Dual Speed Only)
Standard Lift	3 m
Use	Lifting Up/Down
Voltage	220-230V (50/60Hz), 380-460V (50/60Hz)

Technical Characteristics

Standard Specification

Voltage	200-230V (50/60Hz), 380-460V (50/60Hz)	Classification	1 t: M5 (ISO/JIS), 2 m (FEM), H4 (ASME)
Control Voltage	DC24V	Classification	125 to 500 kg: M6 (ISO/JIS), 3 m (FEM), H4 (ASME)
Duty Rating	40/20% ED	Operation Method	Push Button Control (Floor Operation)
Motor Insulation	Class B	Operating Temperature	-20 to 40 ℃ (-4 to 104℉)
Enclosure	Hoist Body: IP55, Push Button Control: IP65	Operating Humidity	85%RH or Less

Safe and Durable Structure with Easier Maintenance

The Integrated Body Protects the High Performance Capabilities and Functions of the Hoist

Outstanding rigidity, effectively dustproof and waterproof, and suitable for severe environments and working conditions
No-load high-speed function
Simply structure and integrated body with few component parts
Dustproof and jetproof body (IP55)

The Combination of Idea and Technology Materialize in a Lightweight Size – Meticulous Inverter-dedicated Design

Fully miniaturized mechanical parts incorporating inverter-based smooth start and stop
Transformer-free structure based on inverter DC power
Thermal protector-free structure based on the electronic thermal system

A Dual-safety Mechanism Prevents Accidents from Excessive Loads – Equipped with a Friction Clutch and Electronic Overload Limiter

The friction clutch prevents the hoist body and load chain from breaking in the event of an abnormal load, e.g. overload and lifting anchored objects.
The electronic overload limiter detects overload with the inverter and stops operation immediately.

Smooth and Ergonomic Operation

Shuts Off Motor Current during Excessive Lifting/Lowering to Prevent Accidents

The upper-lower limit switch prevents damage to the hoist body and load chain during excessive lifting/lowering.
The simple structure of the upper-lower limit switch reduces dead space

Meticulous Long-life Design – Suitable for Severe Environments and Working Conditions – Simple Design with Grade M6 – High-end Duty Rating with Unique Fan-cooled Motor

World-class KITO Original Chain – Superstrong Nickel-plated Load Chain

Highly enhanced fatigue and wear resistance due to ingenious technology
Special alloy steel quenched chain: exceptionally strong, durable and accurate

Visual Indication of Maintenance Timing

Capable of showing the number of starts and cumulative hours of operation for the hoist in the data display, allowing maintenance and inspection according to the frequency of use
Capable of controlling inspection and replacement timings for component parts, etc., to suggest a maintenance plan for safe operation

Shutting Off the Motor Circuit in Case of Emergency

Capable of shutting off the motor circuit at hand by pressing the emergency stop button
Originally designed easy-to-operate push button switch based on ergonomics
24V DC operating voltage for higher safety

Higher Inspector Work Efficiency – Easier Maintenance

Easily remove suspension eyes by installing a connecting shaft at the upper part of the body
Centralized inverter control minimizes the number of electric parts and equipment and replacement parts.

Environmentally Friendly

Free of 15 environmentally hazardous substances specified by KITO, including six European RoHS directive substances
Low-noise during operation and braking due to a 4-pole motor and pull-rotor brake

Specifications & Dimensions

Dual Speed ‘Inverter’ with Suspension Eye

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed* (m/min)
			Lifting Motor	50/60Hz
			Output (kW)	High	Low	No Load High Speed
EQ001IS	125kg	3	0.5	17.0	2.8	22.1
EQ003IS	250kg		0.5	10.0	1.7	13.0
EQ005IS	500kg		0.75	7.6	1.3	9.9
EQ010IS	1		1.5	7.0	1.2	9.2

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	d	e
EQ001IS	395	485	367	230	187
EQ003IS	395
EQ005IS	410
EQ010IS	465	535	403	245	188

The post KITO EQ Electric Chain Hoists With Suspension Eye / Push Button Control first appeared on Kouei Japan Trading | Get Quotation.

KITO CDER2 Electric Chain Hoists

kvtpart — Thu, 25 Oct 2018 02:06:27 +0000

Product Made in Japan
Manufacturer: KITO
Model: CDER2

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance

Features

Compact body – lightweight
Smooth and ergonomic operation
Reliable safety
Enhanced durability
Easier maintenance
Environmentally friendly

Capacity	125 kg, 250 kg
Standard Lift	1.8 m
Use	Lifting Up/Down
Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)	Classification	M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM); H4 (ASME)
		Motor Insulation	Class B for 220-230V (50/60Hz), 380-440V (60Hz) Class F for 380-415V (50Hz), 380-440V (60Hz)
		Enclosure	Hoist Body – IP55, Push Button Control – IP65
Control Voltage	24V (110V for Specific Regions)	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Duty Rating	Single Speed – 60% ED （60 min.） Dual Speed – 40/20% ED （30/10 min.）	Operating Humidity	85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

Smooth and Ergonomic Operation

Inverter – Smooth Transitional Speed
The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
* For non-standard speed ratios, please request them when placing order.
Original Push Button Control
Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
Load Sheave-reduced Vibration
Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

Long-life Friction Clutch
The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
Durable Upper/Lower Limit Switch
The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

Thermal Protector
To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
Magnetic Brake – Failsafe Brake
KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
>10-year/ 2,000,000 cycle brake warranty
>No adjustment needed
>Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

High-end Duty Rating
The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
Unique Motor Frame Fins and Fan Cover
A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

Suspension
The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
Easy Maintenance Control Panel
Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

Environmentally Friendly

No Hazardous Substances
Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.
Energy Saving
Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.
Low-noise
The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Specifications & Dimensions

Cylindrical Control Dual Speed ‘Inverter’ with Hook Suspension

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Net Weight (kg)
			Output (kW)		50/60Hz
			Output (kW)		High	Low
ER2C001IH	125kg	1.8	0.56	Preset	16.6	2.8	28
ER2C001IH	125kg			Adjustable	16.6	1.4
ER2C003IS	250kg			Preset	10.8	1.8
ER2C003IS	250kg			Adjustable	10.8	0.9

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a（MFC）	b（MFC）	d（MFC）	e
ER2C001IH	1010	430	535 (564)	345	276 (305)	259
ER2C003IS	1010	430	535 (564)	345	276 (305)	259

Figures in parentheses are data for mechanical brake with friction clutch.

Cylindrical Control Dual Speed 500V with Hook Suspension

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Net Weight (kg)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	Net Weight (kg)
ER2C001HD	125kg	1.8	0.5/0.13	14.2/3.5	33
ER2C003SD	250kg	1.8	0.5/0.13	7.2/1.8	33

Dimensions (mm)

※Major capacities example

Code	Headroom: C	a (MFC)	b (MFC)	d (MFC)	e
ER2C001HD	1010	478 (564)	321 (345)	219 (305)	259
ER2C003SD	1010	478 (564)	321 (345)	219 (305)	259

Figures in parentheses are data for mechanical brake with friction clutch.

Cylindrical Control Single Speed with Hook Suspension

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)		Net Weight (kg)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	60Hz	Net Weight (kg)
ER2C001H	125kg	1.8	0.56	14.1	16.9	33
ER2C003S	250kg	1.8	0.56	9.1	10.9	33

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a (MFC)	b (MFC)	d (MFC)	e
ER2C001H	1010	430	478 (564)	321 (345)	219 (305)	259
ER2C003S	1010	430	478 (564)	321 (345)	219 (305)	259

Figures in parentheses are data for mechanical brake with friction clutch.

Options

Mechanical Brake with Friction Clutch

Overload Limiter

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

The post KITO CDER2 Electric Chain Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO ER2SP Electric Chain Hoists

kvtpart — Thu, 25 Oct 2018 01:55:49 +0000

Product Made in Japan
Manufacturer: KITO
Model: ER2SP

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance

Features

Compact body – lightweight
Smooth and ergonomic operation
Reliable safety
Enhanced durability
Easier maintenance
Environmentally friendly

Capacity	125 kg to 5 t
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)	Classification	M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM); H4 (ASME)
		Motor Insulation	Class B for 220-230V (50/60Hz), 380-440V (60Hz) Class F for 380-415V (50Hz), 380-440V (60Hz)
		Enclosure	Hoist Body – IP55, Push Button Control – IP65
Control Voltage	24V (110V for Specific Regions)	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Duty Rating	Single Speed – 60% ED （60 min.） Dual Speed – 40/20% ED （30/10 min.）	Operating Humidity	85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

Smooth and Ergonomic Operation

Inverter – Smooth Transitional Speed
The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
* For non-standard speed ratios, please request them when placing order.
Original Push Button Control
Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
Load Sheave-reduced Vibration
Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

Long-life Friction Clutch
The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
Durable Upper/Lower Limit Switch
The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

Thermal Protector
To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
Magnetic Brake – Failsafe Brake
KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
>10-year/ 2,000,000 cycle brake warranty
>No adjustment needed
>Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

High-end Duty Rating
The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
Unique Motor Frame Fins and Fan Cover
A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

Suspension
The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
Easy Maintenance Control Panel
Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

Environmentally Friendly

No Hazardous Substances
Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.
Energy Saving
Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.
Low-noise
The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Specifications & Dimensions

Dual Speed ‘Inverter’ with Plain Trolley

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Flange Width B (mm)
			Output (kW)		50/60Hz		Standard
			Output (kW)		High	Low	Standard
ER2SP001IH	125kg	3	0.56	Preset	16.6	2.8	50-102
ER2SP001IH	125kg		0.56	Adjust- able	16.6	1.4
ER2SP005IS	500kg		0.9	Preset	8.5	1.4
ER2SP005IS	500kg		0.9	Adjust- able	8.5	0.7
ER2SP010IS	1		1.8	Preset	8.2	1.4	58-127
ER2SP010IS	1		1.8	Adjust- able	8.2	0.7	58-127
ER2SP020IS	2		3.5	Preset	8.2	1.4	82-153
ER2SP020IS	2			Adjust- able	8.2	0.7
ER2SP030IS	3			Preset	5.2	0.9
ER2SP030IS	3			Adjust- able	5.2	0.4

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a	b	e	m
ER2SP001IH	395	470	204	182	46	47.5
ER2SP005IS	415	530	204	182	46	47.5
ER2SP010IS	470	590	249	236	56	56
ER2SP020IS	650	690	300	280	69	71
ER2SP030IS	780	910	320	324	79	80

Dual Speed 500V ‘Pole Change’ with Plain Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Flange Width B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	Standard
ER2SP001HD	125kg	3	0.5/0.13	14.2/3.5	50-102
ER2SP005SD	500kg		0.9/0.23	7.1/1.8	50-102
ER2SP010SD	1		1.8/0.45	7.2/1.7	58-127
ER2SP020SD	2		3.5/0.88	6.9/1.6	82-153
ER2SP030SD	3		3.5/0.88	4.4/1.0	82-153

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a	b	e	m
ER2SP001HD	395	470	204	182	46	47.5
ER2SP005SD	415	530	204	182	46	47.5
ER2SP010SD	470	590	249	236	56	56
ER2SP020SD	650	690	300	280	69	71
ER2SP030SD	780	910	320	324	79	80

Single Speed with Plain Trolley

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)		Flange Width B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	60Hz	Standard
ER2SP001H	125kg	3	0.56	14.1	16.9	50-102
ER2SP005S	500kg		0.9	7.3	8.8	50-102
ER2SP010S	1		1.8	7.1	8.5	58-127
ER2SP020S	2		3.5	7.0	8.4	82-153
ER2SP030S	3		3.5	4.4	5.3	82-153

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a	b	e	m
ER2SP001H	395	470	204	182	46	47.5
ER2SP005S	415	530	204	182	46	47.5
ER2SP010S	470	590	249	236	56	56
ER2SP020S	650	690	300	280	69	71
ER2SP030S	780	910	320	324	79	80

Options

Mechanical Brake with Friction Clutch

Overload Limiter

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch

Rated Capacity: 125 kg to 5 t (Inverter Only)

Limit Lock Function
- 1) Upper/Lower Levels Easily Set with Push Button Switches
  - Function: Capable of setting upper/lower limit stop positions for the bottom hook with the push button switch.
  - Number of configurable positions: 1 position each at the upper/lower limit
  - Position detection method: Encoder detection method
  - Stop control: Automatically decelerate to low-speed operation before a limit position.
- 2) High Speed in No-load
  - Function: Automatically increase to 1.5 times faster than high-speed lifting with a load equivalent to about 20% or lower of the rated capacity.
  - No-load high lifting speed: 1.5 times faster than the rated lifting speed (high speed)
  - Load detection method: Loading factor detection method (current value)
  - Response time: Within about 0.3 second (switching from “high lifting speed” to “no-load high lifting speed”)
Stepless Switch
- Function: Seamless speed adjustment from high to low depending on how hard the push button is pressed.
- Speed range: Up to a speed ratio of 1 (high speed): 1/6 (low speed)
- Effective stroke: Approx. 6.5 mm
- Detection method: Magnetic field detection by hall element.

The post KITO ER2SP Electric Chain Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO ER2SG Electric Chain Hoists

kvtpart — Thu, 25 Oct 2018 01:38:56 +0000

Product Made in Japan
Manufacturer: KITO
Model: ER2SG

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance.

Features

Compact body – lightweight
Smooth and ergonomic operation
Reliable safety
Enhanced durability
Easier maintenance
Environmentally friendly

Capacity	125 kg to 20 t
Standard Lift	3 m
Use	Lifting Up/Down, Traversing Left/Right
Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage	220-230V (50/60Hz), 380-415V (50Hz), 380-440V (60Hz), 500V (50Hz, Pole Change for Dual Speed), 460V (60Hz for Specific Regions)	Classification	M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM); H4 (ASME)
		Motor Insulation	Class B for 220-230V (50/60Hz), 380-440V (60Hz) Class F for 380-415V (50Hz), 380-440V (60Hz)
		Enclosure	Hoist Body – IP55, Push Button Control – IP65
Control Voltage	24V (110V for Specific Regions)	Operating Temperature	-20 to 40℃ (-4 to 104℉)
Duty Rating	Single Speed – 60% ED （60 min.） Dual Speed – 40/20% ED （30/10 min.）	Operating Humidity	85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

Smooth and Ergonomic Operation

Inverter – Smooth Transitional Speed
The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
* For non-standard speed ratios, please request them when placing order.
Original Push Button Control
Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
Load Sheave-reduced Vibration
Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

Long-life Friction Clutch
The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
Durable Upper/Lower Limit Switch
The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

Thermal Protector
To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
Magnetic Brake – Failsafe Brake
KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
>10-year/ 2,000,000 cycle brake warranty
>No adjustment needed
>Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

High-end Duty Rating
The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
Unique Motor Frame Fins and Fan Cover
A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

Suspension
The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
Easy Maintenance Control Panel
Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

Specifications & Dimensions

Dual Speed ‘Inverter’ with Geared Trolley

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code	Cap. (t)	Std. Lift (m)	Lifting Motor	Lifting Speed* (m/min)			Folded Hand Chain Length: E (m)	Flange Width B (mm)
			Output (kW)		50/60Hz			Standard
			Output (kW)		High	Low		Standard
ER2SG 001IH	125kg	3	0.56	Preset	16.6	2.8	2.8	58-153
ER2SG 001IH	125kg		0.56	Adjust- able	16.6	1.4
ER2SG 005IS	500kg		0.9	Preset	8.5	1.4
ER2SG 005IS	500kg		0.9	Adjust- able	8.5	0.7
ER2SG 010IS	1		1.8	Preset	8.2	1.4
ER2SG 010IS	1		1.8	Adjust- able	8.2	0.7
ER2SG 020IS	2		3.5	Preset	8.2	1.4		82-153
ER2SG 020IS	2			Adjust- able	8.2	0.7
ER2SG 030IS	3			Preset	5.2	0.9
ER2SG 030IS	3			Adjust- able	5.2	0.4

* The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example.

Code	Headroom: C	D	a	b	e	m
ER2SG001IH	415	490	345	236	152	56
ER2SG005IS	435	550
ER2SG010IS	470	590
ER2SG020IS	650	690	385	280	154	71
ER2SG030IS	780	910	398	324	157	80

Dual Speed 500V ‘Pole Change’ with Geared Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Folded Hand Chain Length: E (m)	Flange Width B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	Folded Hand Chain Length: E (m)	Standard
ER2SG001HD	125kg	3	0.5/0.13	14.2/3.5	2.8	58-127
ER2SG005SD	500kg		0.9/0.23	7.1/1.8
ER2SG010SD	1		1.8/0.45	7.2/1.7
ER2SG020SD	2		3.5/0.88	6.9/1.6		82-153
ER2SG030SD	3		3.5/0.88	4.4/1.0		82-153

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a	b	e	m
ER2SG001HD	415	490	345	236	152	56
ER2SG005SD	435	550
ER2SG010SD	470	590
ER2SG020SD	650	690	385	280	154	71
ER2SG030SD	780	910	398	324	157	80

Single Speed with Geared Trolley

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)		Folded Hand Chain Length:E (m)	Flange Width B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	60Hz	Folded Hand Chain Length:E (m)	Standard
ER2SG 001H	125kg	3	0.56	14.1	16.9	2.8	58-127
ER2SG 005S	500kg		0.9	7.3	8.8
ER2SG 010S	1		1.8	7.1	8.5
ER2SG 020S	2		3.5	7.0	8.4		82-153
ER2SG 030S	3		3.5	4.4	5.3		82-153

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	a	b	e	m
ER2SG001H	415	490	345	236	152	56
ER2SG005S	435	550
ER2SG010S	470	590
ER2SG020S	650	690	385	280	154	71
ER2SG030S	780	910	398	324	157	80

Large Capacity with Geared Trolley

The large capacity model is suitable for using with the middle and large crane.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Lifting Motor	Lifting Speed (m/min)	Folded Hand Chain Length: E (m)	Flange Width B (mm)
Code	Capacity (t)	Standard Lift (m)	Output (kW)	50Hz	Folded Hand Chain Length: E (m)	Standard
ER2SG075S	7.5	3	3.5	1.9	3.2	150-220
ER2SG100L	10		3.5	1.4
ER2SG100S	10		3.5 × 2	2.9
ER2SG150S	15			1.9	3.7
ER2SG200S	20			1.4	3.7

Trolley wheels for tapered I-beam are provided as standard.
The wheels for flat flange beam are also available so make a request in advance if necessary.

Dimensions (mm)

※Major capacities example

Code	Headroom: C	D	b	e	g	w
ER2SG075S	1165	1230	480	531	61	662
ER2SG100L	1180	1210			80	718
ER2SG100S	1180	1020			80	956
ER2SG150S	1310	1230	1000		86	1129
ER2SG200S	1345	1230	1000		102	1305

Options

Mechanical Brake with Friction Clutch

Overload Limiter

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch

Rated Capacity: 125 kg to 5 t (Inverter Only)

Limit Lock Function
- 1) Upper/Lower Levels Easily Set with Push Button Switches
  - Function: Capable of setting upper/lower limit stop positions for the bottom hook with the push button switch.
  - Number of configurable positions: 1 position each at the upper/lower limit
  - Position detection method: Encoder detection method
  - Stop control: Automatically decelerate to low-speed operation before a limit position.
- 2) High Speed in No-load
  - Function: Automatically increase to 1.5 times faster than high-speed lifting with a load equivalent to about 20% or lower of the rated capacity.
  - No-load high lifting speed: 1.5 times faster than the rated lifting speed (high speed)
  - Load detection method: Loading factor detection method (current value)
  - Response time: Within about 0.3 second (switching from “high lifting speed” to “no-load high lifting speed”)
Stepless Switch
- Function: seamless speed adjustment from high to low depending on how hard the push button is pressed.
- Speed range: Up to a speed ratio of 1 (high speed): 1/6 (low speed)
- Effective stroke: Approx. 6.5 mm
- Detection method: Magnetic field detection by hall element.

The post KITO ER2SG Electric Chain Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO KC Clip

kvtpart — Tue, 23 Oct 2018 08:18:47 +0000

Product Made in Japan
Manufacturer: KITO
Model: KC

Easy-to-use and economical

Features

Can be fixed easily in any location along a wire.
The wire is firmly gripped by simply inserting it into the frame and pulling.
Feature a special groove that protects the wire.
Economical and versatile

Specifications & Dimensions

Specifications

※Major capacities example

Code	Capacity (t)	Applicable Wire Rope Diameter (mm)	Mass (Net weight) (kg)
KC100	0.75	8 to 10	0.9
KC140	1.5	12 to 14	2.0
KC200	3	16 to 20	4.8

Dimensions (mm)

※Major capacities example

Code	a	b	c
KC100	34	16	10.5
KC140	42	19	15.5
KC200	48	20	18

The post KITO KC Clip first appeared on Kouei Japan Trading | Get Quotation.

KITO LX Manual Hoists

kvtpart — Tue, 23 Oct 2018 08:14:51 +0000

Product Made in Japan
Manufacturer: KITO
Model: LX

Ultra-compact, lightweight, portable design for ease of use in elevated work positions.

Features

The durable die-cast aluminum body and steel frame is compact and lightweight.
Available in two capacities (250 and 500 kg) for all applications.
Minimal hand-pull force required for highly reliable pulling and lifting to the final click.
Ultra-low headroom design for use in confined spaces.
Free-chain adjusting mechanism for swift adjustments

Capacity	0.25 t, 0.5 t
Standard Lift	1.0 m (0.25 t), 1.2 m (0.5 t)
Operating Temperature	-40 to +60℃

Specifications & Dimensions

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Hand-pull to Lift Full Load (N) [kg]	Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight) (kg)
LX003	250 [0.25]	1	200 [20]	3.2 × 1	1.6
LX005	500 [0.5]	1.2	310 [31]	4.3 × 1	2.6

Dimensions (mm)

※Major capacities example

Code	a	b	C	D	e	g
LX003	90.5	73.5	205	150	62	21
LX005	102	93	246	180	68	24.5

Options

Special Carrying Case for LX003

The LX003 fits comfortably in this stylish, black carrying case, which can be attached to your belt for enhanced convenience.

The post KITO LX Manual Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO LB Manual Hoists

kvtpart — Tue, 23 Oct 2018 08:06:30 +0000

Product Made in Japan
Manufacturer: KITO
Model: LB

Compact, light, and tough frame for heavy-duty applications

Features

Smaller, lighter, stronger
Prioritizing safety, operability, and ruggedness so that the LB series performs well under the toughest field conditions
Designed for all applications in professional fields such as transportation, bridges, general construction, civil engineering, shipbuilding, and forestry.
KITO original free chain adjusting mechanism

Capacity	0.8 to 9t
Standard Lift	1.5 m
Operating Temperature	-40 to +60℃

Technical Characteristics

Smaller, Lighter, Stronger

We use double-reduction gearing and a patented induction-hardening process to produce load-bearing parts that reduce the weight and size of hoists while improving overall strength. Consequently, less hand force is required for operation and portability is improved.

Nickel-plated Super-strong Load Chain (Breaking Stress of 1000 N/㎟)

Abrasion- and corrosion-resistant, plated load chain grade V (high breaking strength of 1,000 N/mm²)

Super-strong Frame

A patented induction-hardening process used to produce load-bearing parts makes the frame stronger and more rigid. The high-impact steel housing has a weight similar to aluminum due to the compact design.

Increased Lever Strength

A new shape and thicker material creates a very strong lever handle.

Hook Latch with Safety Mechanism

The thicker material strengthens the latch, which engages with the tip of the hook for secure closure.

Hooks

Hooks are forged from super-strong alloy steel allowing the use of smaller and lighter hooks with larger capacities – from 2.5 to 9 ton.

Cap Nuts Used for Easier Maintenance

Cap nuts are used to fasten the gear case and brake cover protecting the screw from damage and facilitating maintenance.

KITO Original Free Chain Adjusting Mechanism

Use the free knob to swiftly and easily adjust the chain. A unique design helps prevent inadvertent freewheeling under load.

Reliable (Mechanical) Brake

Delivers excellent performance thanks to a brake design incorporating two moisture-resistant, asbestos-free brake pads and four braking surfaces. Includes two brake pawls for added reliability.

Bottom Yoke with Safety Guard

Features a guard protecting the chain pin and nut from damage, enhancing safety.

Specifications

※Major capacities example

Code	Capacity (t)	Standard Lift (m)	Hand-pull to Lift Full Load (N) [kg]	Load Chain Dia × Chain Fall (mm)	Mass (Net Weight)*1 (kg)
LB008	0.8	1.5	284 [29]	5.6 × 1	5.7
LB010	1		353 [36]	5.6 × 1	5.9
LB016	1.6		333*2 [34]	7.1 × 1	8
LB025	2.5		363*2 [37]	8.8 × 1	11.2
LB032	3.2		363*2 [37]	10 × 1	15
LB063	6.3		372*2 [38]	10 × 2	26
LB090	9		382*2 [39]	10 × 3	40

* The Mass (Net Weight) is for the standard lift.

Dimensions (mm)

※Major capacities example.

Code	a	b	C	D	e	g
LB008	144	119	280	245	97	23.5
LB010	144	119	300	245	97	29
LB016	159	126	335	265	100	32
LB025	173	150	375	265	102	36.5
LB032	190	159	395	415	112	39
LB063		217	540			50
LB090		304	680			72.5

The post KITO LB Manual Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO TF Series Manual Hoists

kvtpart — Tue, 23 Oct 2018 07:34:10 +0000

Product Made in Japan
Manufacturer: KITO
Model: TF Series

Economical and universal trolley, industrial quality, built for long life.

Features

Equipped with a lifetime-lubricated ball bearing.
Adjustable for both tapered and flat flanged
Load equalization and smooth operation with pivot-mounted trolley frames
Extremely small min. radius for curves (capacity of 500 kg to 3 ton)

Specifications & Dimensions

Plain Trolley

Specifications

※Major capacities example

Code	Cap. (t)	Hand Chain Folded Length (m)	Beam Width Adjustability (mm)			Min. Radius for Curve (mm)	Mass (Net Weight) (kg)
			Standard	Option
			Standard	W20*	W30*
TFP010	1	2.5	58-127	127-203	203-305	450	7.0
TFP015	1.5	2.5	82-153	–	153-305	550	13
TFP020	2	3.0				550	13
TFP030	3	3.0				650	21
TFP050	5	3.5	125-178		178-305	2000	43

* W20 and W30 mean 203 and 305 mm beam width adjustability as option.
* In case of only straight I-beam, 500 kg plain trolley can be used on 58 mm and less width beam, and 1 ton plain trolley can be used on 74 mm and less width beam.

Geared Trolley

Specifications

※Major capacities example

Code	Cap. (t)	Hand Chain Folded Length (m)	Beam Width Adjustability (mm)			Min. Radius for Curve (mm)	Mass (Net Weight) (kg)
			Standard	Option
			Standard	W20*	W30*
TFG010	1	2.5	58-127	127-203	203-305	450	11
TFG015	1.5	2.5	82-153	–	153-305	550	17
TFG020	2	3.0				550	17
TFG030	3	3.0				650	25
TFG050	5	3.5	125-178		178-305	2000	47

* W20 and W30 mean 203 and 305 mm beam width adjustability as option.

In case of only straight I-beam, 1 ton geared trolley can be used on 74 mm and less width beam.

About Trolley

Manual

Plain Trolley（TSP）

Designed to provide smooth and easy traversing.
Lugs provide protection from striking damage against rail stoppers, and from falling off the rail.
Wheel flange also prevent derailment.
Designed for light load manual applications.

Geared Trolley（TSG）

Designed to provide smooth and easy traversing.
Lugs provide protection from striking damage against rail stoppers, and from falling off the rail.
Wheel flange also prevent derailment.
Designed for precise positioning and traversing by using hand chain.

The post KITO TF Series Manual Hoists first appeared on Kouei Japan Trading | Get Quotation.

KITO Manual Hoists – Special Application Models

kvtpart — Tue, 23 Oct 2018 07:27:50 +0000

Product Made in Japan
Manufacturer: KITO
Special Application Models. KITO can provide solutions to meet customers’ requests.

Features

KITO has various special application products to meet customers’ requests based on model M3, which contributes significantly to enhancing operational productivity and safety.

Product Specification

High Speed CB

KITO has achieved rapid no-load operation with its unique automatic high/low-speed clutch technology developed in-house, for a no-load lifting speed seven times faster! A speed-change gear is located behind the brake for absolute safety.
The hoist boasts high operability under load, equivalent to standard specifications. This eliminates the stress workers previously endured in preparing for fieldwork. Available in capacities from 2.5 to 50 ton.

Specifications

※Major capacities example

Code	Cap. (t)	Chain Pull to Lift Load*1 (N)	Chain O’hauled to Lift Load One Meter (m)		Load Chain Dia. x Chain Fall (mm)	Lifting Changeover Load*2 (t)
Code	Cap. (t)	Low Speed	High Speed	Low Speed	Load Chain Dia. x Chain Fall (mm)	Lifting Changeover Load*2 (t)
CB025	2.5	363	14	99	9.0 × 1	0.25 or less
CB050	5	372	28	198	9.0 × 2	0.5 or less
CB075	7.5	382	42	297	9.0 × 3	0.7 or less
CB100	10	392	56	396	9.0 × 4	0.9 or less
CB150	16	412	85	594	9.0 × 6	1.3 or less
CB200	20	392 × 2	56 × 2	396 × 2	9.0 × 8	1.8 or less
CB300	32	470 × 2	71 × 2	495 × 2	9.0 × 10	2.2 or less
CB400	40	480 × 2	99 × 2	693 × 2	9.0 × 14	2.9 or less
CB500	50	529 × 2	113 × 2	792 × 2	9.0 × 16	3.2 or less

*1 The diameter of the hand chain is all 5 mm.
*2 It is a load level to switch from ｈigh speed to low speed when it is lifting.

SHB (Short Headroom Type)

This ultra-low headroom trolley hoist offers premium quality and durability in a low-profile package. With KITO’s SHB hand chain hoist, the built-in geared trolley configuration minimizes the beam-to-hook distance, making it ideal for applications where longer hook travel is required. This hoist is also ideal for demanding industrial lifting applications within confined spaces.

Specifications

※Major capacities example

Code	Cap. (t)	Standard Lift (m)	Hand-pull to Lift Full Load (kg)	Flange Width: B (mm)		Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight) (kg)
Code	Cap. (t)	Standard Lift (m)	Hand-pull to Lift Full Load (kg)	Standard	W30	Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight) (kg)
SHB010	1	2.5	30	58 – 163	164 – 305	5.0 × 2	65
SHB020	2	3	27	82 – 204	205 – 305	7.1 × 2	110
SHB030	3		34	82 – 204		8.0 × 2	155
SHB050	5		38	125 – 204		9.0 × 2	275
SHB075	7.5	3.5	31	150 – 219	220 – 305	9.0 × 4	370
SHB100	10	3.5	41	150 – 219	220 – 305	9.0 × 4	370

Other capacities are avialable upon request.
The left photo includes lug and buffer as option.

Dimensions (mm)

※Major capacities example.

Code	Headroom: C		e	n	b1	b2
Code	SHB	CBSG	e	n	b1	b2
SHB010	115	305	201.5	179.5	203	343
SHB020	145	380	227	194	243.5	398.5
SHB030	165	535	240	206.5	294	464
SHB050	195	660	264.5	223	349.5	539.5
SHB075	255	870	291	215.7	392.6	585.6
SHB100	255	860	291	215.7	392.6	585.6

The above dimensions are for SHB without lug and buffer.

CB-ATEX

Lift more safely in environments with combustible gases, vapors, and dust. KITO’s CB-ATEX series explosion-proof hand chain hoist is perfect for petroleum, gas, pharmaceutical, and food industries – or any environment where the use of anti-sparking equipment can improve safety.

Ex-protected: Ex II 2G c IIB T4 and Ex Ⅱ 2D c 135℃
Facilitates Operation in Potentially Explosive Atmospheres: Conforms to ATEX directive 94/9/EC
Increased Safety within Tolerable Temperature Range: Maximum equipment temperature 135℃
Safe Operation in Potentially Explosive Atmospheres: Protected against explosive gases, vapors and dust

Specifications

※Major capacities example

Code	Cap (t)	Standard Lift (m)	Hand Chain Folded Length (m)	Load Chain Dia. × Chain Fall (mm)	Mass (Net Weight) (kg)
CB005 ATEX	0.5	2.5	2.5	6.3 × 1	11.5
CB010 ATEX	1	2.5	2.5	7.1 × 1	14.5
CB020 ATEX	2	3.0	3.0	7.1 × 2	24
CB030 ATEX	3	3.0	3.5	9.0 × 2	41

Dimensions (mm)

※Major capacities example

Code	Capacity (t)	Headroom: C	a	b	d
CB005 ATEX	0.5	295	162	161	2500
CB010 ATEX	1	350	171	182	2500
CB020 ATEX	2	510	171	235	3100
CB030 ATEX	3	600	192	282	3600

Offshore Model

Specially designed for use in the robust and harsh environments of offshore and underground mines.

Forged Hook Latches: Fitted to top and bottom hooks; capable of withstanding side loading exceeding 30% of the safe working load without failure or distortion.
Sealed Bearings ‘Reduced Downtime’: Double-Shield Sealed Bearings prevent the ingress of dirt, thereby prolonging bearing life and efficiency.
Double-brake Pawls: Two independent brake pawls, each fitted with a pair of independent pawl springs, for the safest and most reliable braking system available.
Cap Nuts ‘Reduced Maintenance Costs’: All exposed threads are protected from mechanical damage and ingress of dirt by fitting domed nuts to all external studs.

The post KITO Manual Hoists – Special Application Models first appeared on Kouei Japan Trading | Get Quotation.

KITO M3 0.5t-50t Chain Block

Admin — Sun, 06 Nov 2016 05:10:54 +0000

Product made in Japan

Manufacturer: KITO

Model: M3 (CB Series)

Features

10 Important Features Of “KITO MIGHTY Model M3” Chain Hoist

Gear Case and Hand Wheel Cover are Resistant to External Shocks
Both sides of the hoist are covered with a thick steel gear case and reinforced wheel cover. Manufactured using state-of-the-art technology, these critical components are ideally shaped and highly rigid to maintain bearing alignment and withstand external shock.
Double Enclosures Protect Against Rainwater and Dust Intrusion
The braking mechanism, comprising the heart of the hoist, is securely enclosed within the wheel and brake covers. This double coverage protects the internal mechanisms from intrusion by weather elements, mud and dust. Further, the hand chain guide attached to the wheel cover provides durability and a smooth operation of the hand chain on the hand chain wheel.
Double Pawl Spring Mechanism
Increases Safety and Reliability
The MIGHTY M3 insists on two pawl springs to deliver an extra degree of performance in case one spring is damaged.
Sure and Reliable Mechanical Brake
KITO’s dry-type asbestos-free mechanical brake ensures outstanding stopping power and safety for high performance operation.
Hooks for Easy Work
Heat-treated to withstand the rigors of the toughest jobs, the MIGHTY M3’s top and bottom hooks are ready to make your work easier. The bottom hook’s relatively large dimensions enable a load to be quickly stabilized in the proper position while the bottom yoke’s protecting guard protects the chain pin and nut from damage, further enhancing safety.
Bearing Mechanism
Increases Mechanical Efficiency
KITO’s unique ball and needle bearings optimize mechanical efficiency and produce high power output with a minimum of manual input.
Load Chain Guide Mechanism Smoothes Operation
Superior performance is designed into the MIGHTY M3. Smooth load chain movement is facilitated by having a chain guide mechanism in the flanged load sheave and guide roller.
Highly Accurate and Durable Gears
Years of research and development have enabled KITO to produce compact, highly efficient and durable gears.
Stopper Prevents Excessive Lowering
KITO’s carefully engineered stopper assembly not only prevents a load from being lowered too far, but even keeps the chain from exiting the mechanism. Increased pull force signals the operator the load has been lowered to the maximum extent.
Highly Strong Load Chain
Load chains, the component comprising the heart of the chain hoist, are made of an exclusively developed, heat treated special steel alloy. Carefully selected special steel is entirely processed at KITO’s fully automated production facilities under the most stringent quality control. Thus, all of the KITO chains are uniform in
high breaking stress of 1000N/mm2(100kgf/mm2). They have excellent quality including toughness and resistance to wear and corrosion.

Variation

Specifications

Rated Load (W.L.L.) (t)	Code	Std.Lift (m)	Hand Chain Folded Length (m)	Chain Pull to Lift Full Load (N) [kgf]	Chain O’haulled to Lift Load One Meter (m)	Load Chain Dia.xChain Fall (mm)	Test Load (t)	Mass [Net weight] (kg)	Shipping Mass [weight] (approx.) (kg)	Mass [weight] in kg for Additional One Meter of Lift (kg)
0.5	CB005	2.5	2.5	235 [24]	25	5.0×1	0.75	10	10.5	1.5
1	CB010	2.5	2.5	284 [29]	43	6.3×1	1.5	11.5	12	1.8
1.5	CB015	2.5	2.5	343 [35]	57	7.1×1	2.4	14.5	15	2.1
2	CB020	3.0	3.0	353 [36]	70	8.0×1	3	20	21	2.3
2.5	CB025	3.0	3.0	323 [33]	99	9.0×1	3.8	27	28	2.7
3	CB030	3.0	3.0	353 [36]	114	7.1×2	4.8	24	26	3.2
5	CB050	3.0	3.5	333 [34]	198	9.0×2	7.5	41	43	4.4
7.5	CB075	3.5	4.0	343 [35]	297	9.0×3	9.5	63	66	6.2
10	CB100	3.5	4.0	353 [36]	396	9.0×3	12.5	83	91	7.9
15	CB150	3.5	4.5	363 [37]	594	9.0×3	20	155	165	11.4
20	CB200	3.5	4.5	353 [36] x2	396×2	9.0×3	25	235	305	15.8
30	CB300	3.5	4.5	421 [43] x2	495×2	9.0×10	40	310	400	19.2
40	CB400	3.5	4.5	421 [43] x2	693×2	9.0×14	50	480	630	26.2
50	CB500	3.5	4.5	480 [49] x2	792×2	9.0×16	62.5	640	790	29.7

•As KITO chains are heat-treated, splicing of the load chain is prohibited.
•When ordering, specify the lifting height.
•Chain falls vary depending on the capacity of each hoist.

DIMENSIONS (mm)

Rated Load (W.L.L.) (t)	Headroom :C	a	b	d	e	f	g	s	t	u	v	w	x
0.5	285	158	161	2500	69	99	27	35.5	12.1	17	77	35	89
1	295	162	161	2500	71	99	29	42.5	16	21.8	93	41	101
1.5	350	171	182	2500	78	112	34	47.5	19.5	26.5	106	47	119
2	375	182	202	3000	87	125	36	50	21.8	30	116	49	124
2.5	420	192	233	3000	91	143	40	53	24.3	33.5	126	53	136
3	510	171	235	3100	78	162	42.5	56	27.2	37.5	138	57	148
5	600	192	282	3600	91	194	46.5	63	34.5	47.5	161	67.5	172
7.5	770	192	373	4200	91	253	72.5	85	47.5	63	231	97.5	275
10	760	192	438	4200	111	308	72.5	85	47.5	63	231	97.5	295
15	1020	268	492	4700	119	337	80	100	50	67	275	110	351
20	1180	374	746	4800	187	373	81	110	67	88	301	125	395
30	1300	404	746	4800	202	373	103	125	75	100	412.5	143	445
40	1480	502	760	4900	251	380	96	145	123	155	467	182.5	470
50	1560	544	796	4900	272	398	100	165	135	155	447.5	202.5	467

TROLLEY-CONNECTED HOIST

GEARED TYPE

PLAIN TYPE

Specifications

Rated Load (W.L.L.)(t)	Code	Std.Lift (m)	Hand Chain Folded Length (m)	Load Chain Dia. x Chain Fall (mm)	Test Load (t)	Mass (Net Weight) (kg)	Mass [weight] in kg for Additional One Meter of Lift (kg)
0.5	CBSG(CBSP)005	2.5	2.5	5.0×1	0.75	23(15)	2.4(1.5)
1	CBSG(CBSP)010	2.5	2.5	6.3×1	1.5	24(19)	2.7(1.8)
1.5	CBSG(CBSP)015	2.5	2.5	7.1×1	2.4	32(28)	3.0(2.1)
2	CBSG(CBSP)020	3.0	3.0	8.0×1	3	37(33)	3.3(2.3)
2.5	CBSG(CBSP)025	3.0	3.0	9.0×1	3.8	52(48)	3.6(2.7)
3	CBSG(CBSP)030	3.0	3.0	7.1×1	4.8	48(44)	4.1(3.2)
5	CBSG(CBSP)050	3.0	3.5	9.0×2	7.5	92(87)	5.4(4.4)
7.5	CBSG075	3.5	4.0	9.0×3	9.5	175	7.1
10	CBSG100	3.5	4.5	9.0×4	12.5	185	8.8
15	CBSG150	3.5	4.5	9.0×6	20	395	13.3
20	CBSG200	3.5	4.5	9.0×8	25	495	17.7

•CBSG and CBSP mean the CB Series connected with the TS Series geared trolley and plain trolley respectively.
•Figures in parentheses show the data for the plain trolley. Other data are the same for both the plain and geared trolleys.
•15 ton-and-over capacity trolleys have 8-wheel construction.

DIMENSIONS (mm)

Rated Load (W.L.L.) (t)	Headroom :C	a (Max)	a’	b	d	e	f	g	h	i	j	k	k’	m	n	o	p	q	r	t	u
0.5	305/295 (173)	275/251 (173)	309/249 (204)	236 (182)	2500	116 (46)	2300	27	106 (82)	71 (60)	28 (19)	95 (76)	106	56 (47.5)	112 (84)	50 (42)	69 (54)	10	50 (38)	25 (22)	183
1	305	275 (251)	309/249 (204)	236 (182)	2500	116 (56)	2300	29	106	71	28	95	106	56	112 (84)	50 (42)	69 (54)	10	50 (38)	25 (22)	183

The post KITO M3 0.5t-50t Chain Block first appeared on Kouei Japan Trading | Get Quotation.

KITO | Kouei Japan Trading | Get Quotation

KITO CB Manual Hoists With Hook Suspension

Features

Technical Characteristics

Specifications

※Major capacities example.

Options

Overload Protection Device (OLL)

Chain Container

KITO LB Lever Block

KITO VAN LEUSDEN – Manual Chain Hoist

500 KG – 50,000 KG LIFTING CAPACITY

KITO CX Manual Hoists

Features

Technical Characteristics

Specifications & Dimensions

Specifications

※Major capacities example

Dimensions (mm)

※Major capacities example

KITO ER2 Electric Chain Hoists

Features

Technical Characteristics

Standard Specification

360° VIEW

Compact Body – Lightweight

Smooth and Ergonomic Operation

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

Reliable Safety: Thermal Protector and Magnetic Brake

Reliable Safety: Emergency Stop

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

Easier Maintenance: Suspension and Easy Maintenance Control Panel

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

Environmentally Friendly

Dual Speed ‘Inverter’ with Hook Suspension

Specifications

Dimensions (mm)

Dual Speed 500V ‘Pole Change’ with Hook Suspension

Specifications

Dimensions (mm)

Single Speed with Hook Suspension

Specifications

Dimensions (mm)

Large Capacity with Hook Suspension

Specifications

Dimensions (mm)

Options

Self-Locking Hook

Mechanical Brake with Friction Clutch

Overload Limiter

Load Bell

High-functional ER2 Series – Limit Lock Function / – Stepless Switch

KITO High Speed CB

Features

Specifications & Dimensions

Specifications

Dimensions

KITO CBSG/CBSP Manual Hoists With Manual Trolley

Features

Technical Characteristics

Specifications & Dimensions

With Geared Trolley

Specifications

※Major capacities example

Dimensions (mm)

※Major capacities example.

With Plain Trolley

Specifications

※Major capacities example.

Dimensions (mm)

※Major capacities example.

Options

Overload Protection Device (OLL)

Chain Container

Trolleys for Curved Beams

Rail Clamp Device

About Trolley

Manual

KITO TWER2M Electric Chain Hoists – Application-oriented Models

Enhanced Durability: High-end Duty Rating with Unique Motor
Frame Fins and Fan Cover

Enhanced Durability: Super-strong, Corrosion- and
Wear-resistant Load Chain

Easier Maintenance: CH (Counter Hour) Meter
(Inside Inverter for Dual Speed)

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch