, , ,

KITO ER2M Electric Chain Hoists

Product Made in Japan
Manufacturer: KITO
Model: ER2M

Smooth and ergonomic operation, reliable safety, enhanced durability, easier maintenance

Features

  • Compact body – lightweight
  • Smooth and ergonomic operation
  • Reliable safety
  • Enhanced durability
  • Easier maintenance
  • Environmentally friendly
Capacity 125 kg to 20 t
Standard Lift 3 m
Use Lifting Up/Down, Traversing Left/Right
Voltage 220-230V (50/60Hz), 380-415V (50Hz), 380-440V
(60Hz), 500V (50Hz, Pole Change for Dual Speed),
460V (60Hz for Specific Regions)

Technical Characteristics

Standard Specification

Voltage 220-230V (50/60Hz), 380-415V (50Hz),
380-440V (60Hz), 500V (50Hz, Pole
Change for Dual Speed), 460V (60Hz
for Specific Regions)
Classification M4, M5, M6 (ISO); 1 Am, 2 m, 3 m (FEM);
H4 (ASME)
Motor Insulation Class B for 220-230V (50/60Hz), 380-440V (60Hz)
Class F for 380-415V (50Hz), 380-440V (60Hz)
Enclosure Hoist Body – IP55, Push Button Control – IP65
Control
Voltage
24V (110V for Specific Regions) Operating
Temperature
-20 to 40℃ (-4 to 104℉)
Duty Rating Single Speed – 60% ED (60 min.)
Dual Speed – 40/20% ED (30/10 min.)
Operating Humidity 85%RH or Less

Leveraging Today’s Most Advanced Hoisting Technology, This High-performance Hoist Exceeds the Expectations of Even the World’s Most demanding Users.

Compact Body – Lightweight

The compact aluminum die-cast body features exceptional rigidity and effective protection against dust and water. It has a simple structure and uses minimal parts, while the fine-tuned load-chain profile better exploits the lighter hoist body weight compared to the previous ER.

Smooth and Ergonomic Operation

  1. Inverter – Smooth Transitional Speed
    The dual-speed inverter delivers smoother movement than the pole change motor, reducing the load swing, while the high-to-low speed ratio can be set to a large value. These allow smooth starts and improve low-speed stops and positioning accuracy. The standard speed ratio is 6:1; adjustable up to 12:1* for lifting and 10:1* for traversing.
    * For non-standard speed ratios, please request them when placing order.
  2. Original Push Button Control
    Your comfort and safety are assured with push button pendants that are fitted with ergonomic controls and an emergency stop button.
  3. Load Sheave-reduced Vibration
    Increasing the number of load sheave pockets helps relieve vibrations produced by the revolving polygonal sheave on the hoist’s body and load chain.

Reliable Safety: Friction Clutch and Upper-lower Limit Switch

  1. Long-life Friction Clutch
    The friction clutch prevents damage to the hoist by automatically engaging in the event of an excessive overload. When the friction clutch engages, the motor is allowed to continue turning protecting both you and the hoist.
  2. Durable Upper/Lower Limit Switch
    The limit switch stops working if either end of the load chain comes into contact with the hoist body; protecting against unnecessary downtime and service costs. The ER2’s redesigned upper-lower limit switch features enhanced durability and a low-profile design for improved hoist headroom.

Reliable Safety: Thermal Protector and Magnetic Brake

  1. Thermal Protector
    To prevent motor burnout due to excessive usage, a standard thermal protector is installed in the motor.
  2. Magnetic Brake – Failsafe Brake
    KITO’s DC-current brake design reduces maintenance costs by eliminating initial drag and responding immediately on stoppage. This also exposes the motor to less torque for ultra-quiet and smooth operation. Unlike voltage brakes, the advanced technology used in KITO’s DC-current brake protects against hoist failure in the event of motor burnout or single-phasing.
    >10-year/ 2,000,000 cycle brake warranty
    >No adjustment needed
    >Electrical failsafe design

Reliable Safety: Emergency Stop

The emergency stop, provided as standard, allows the motor power to be disconnected in an emergency without cutting off the main power supply.

Enhanced Durability: High-end Duty Rating with Unique Motor Frame Fins and Fan Cover

  1. High-end Duty Rating
    The ER2 achieves M6 (ISO)/3 m (FEM) class with a duty cycle of 60% ED. Supporting use under the most demanding environments and conditions, this long-service-life hoist is a heavy-duty product which can also handle high-frequency or long-lift operations.
  2. Unique Motor Frame Fins and Fan Cover
    A unique fan-cooled motor with motor frame fins and a fan cover have been combined in this purpose-built design. This design produces a much quieter motor unit as well as enhanced fan cooling capabilities, while the aluminum die-cast motor frame with external motor fan limits any heat-up during frequent operation.

Enhanced Durability: Super-strong, Corrosion- and Wear-resistant Load Chain

KITO’s world-class original super-strong nickel-plated load chain, certified by the German Institute, uses unique technology for exceptional fatigue- and wear-resistance.

Easier Maintenance: Suspension and Easy Maintenance Control Panel

  1. Suspension
    The hoist can easily be changed from a hook to a lug-mount configuration with external suspension pins on most models.
  2. Easy Maintenance Control Panel
    Simple layout of controls and a single swing-down panel. The captured control cover comes complete with a standard wiring diagram for swift on-site access.

Easier Maintenance: CH (Counter Hour) Meter (Inside Inverter for Dual Speed)

This standard feature shows the cumulative hours of hoist operation and the number of lowering starts on the LCD of the CH meter, which allows the user to maintain the unit based on the frequency of use. By maintaining historical CH meter data, the inspection and replacement periods for gear oil, contactors, brakes and load chains can be efficiently controlled; allowing the equipment to be used with confidence.

Environmentally Friendly

  1. No Hazardous Substances
    Built smarter, eliminating the use of harmful materials. Environmentally friendly and RoHS-compliant.
  2. Energy Saving
    Allows energy to be saved due to the reduction in rated current draw compared to the previous ER.
  3. Low-noise
    The utilization of the inverter, 4-pole motor as well as the electromagnetic brake, reduces the noise during operation and braking.

Specifications & Dimensions

Dual Lifting Speed ‘Inverter’ – Single Traversing Speed with Motorized Trolley

The dual lifting speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code Cap.
(t)
Std.
Lift
(m)
Lifting Motor Lifting Speed*
(m/min)
Trav.
Motor
Traversing
Speed
(m/min)
Net
Wt.
(kg)
Output
(kW)
50/60Hz Output
(kW)
50Hz 60Hz
High Low
ER2M
001IH
-S/L
125kg 3 0.56 Preset 16.6 2.8 0.4 20
(10)
24
(12)
58
Adjust-
able
1.4
ER2M
005IS
-S/L
500kg 0.9 Preset 8.5 1.4 67
Adjust-
able
0.7
ER2M
010IS
-S/L
1 1.8 Preset 8.2 1.4 82
Adjust-
able
0.7
ER2M
020IS
-S/L
2 3.5 Preset 8.2 1.4 127
Adjust-
able
0.7
ER2M
030IS
-S/L
3 Preset 5.2 0.9 153
Adjust-
able
0.4
  • The bracketed figures in Traversing Speed are low speed.
  • The minimum radius curve may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.
  • * The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.\

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d e m
ER2M001IH-S/L 375 450 315 220 515 205
ER2M005IS-S/L 395 510
ER2M010IS-S/L 435 550
ER2M020IS-S/L 585 630 325 225 520 212
ER2M030IS-S/L 765 900 340 226 521 215

Dual Lifting Speed 500V ‘Pole Change’ – Single Traversing Speed with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code Cap.
(t)
Standard Lift
(m)
Lifting
Motor
Lifting
Speed
(m/min)
Trav.
Motor
Traversing
Speed
(m/min)
Net
Wt.
(kg)
Output
(kW)
50Hz Output
(kW)
50Hz
ER2M001HD
-S/L
125kg 3 0.5/0.13 14.2/3.5 0.4 20 (10) 62
ER2M005SD
-S/L
500kg 0.9/0.23 7.1/1.8 74
ER2M010SD
-S/L
1 1.8/0.45 7.2/1.7 88
ER2M020SD
-S/L
2 3.5/0.88 6.9/1.6 135
ER2M030SD
-S/L
3 4.4/1.0 161
  • The bracketed figures in Traversing Speed are low speed.
  • The minimum radius curve may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d e m
ER2M001HD-S/L 375 450 315 268 515 205
ER2M005SD-S/L 395 510
ER2M010SD-S/L 435 550
ER2M020SD-S/L 585 630 325 273 520 212
ER2M030SD-S/L 765 900 340 274 521 215

Dual Lifting ‘Inverter’ – Dual Traversing Speed ‘Inverter’ with Motorized Trolley

The dual speed inverter delivers smoother movement than the pole change motor, reducing load swing.

Specifications

※Major capacities example

Code Cap.
(t)
Std.
Lift
(m)
Lifting
Motor
Lifting Speed*
(m/min)
Trav.
Motor
Traversing Speed*
(m/min)
Net
Wt.
(kg)
Output
(kW)
50/60Hz Output
(kW)
50/60Hz
High Low High Low
ER2M
001IH
-IS
125kg 3 0.56 Preset 16.6 2.8 0.4 Preset
24
——-
Adjust-
able
24
Preset
4
——-
Adjust-
able
2.4
59
Adjust-
able
1.4
ER2M
005IS
-IS
500kg 0.9 Preset 8.5 1.4 69
Adjust-
able
0.7
ER2M
010IS
-IS
1 1.8 Preset 8.2 1.4 84
Adjust-
able
0.7
ER2M
020IS
-IS
2 3.5 Preset 8.2 1.4 129
Adjust-
able
0.7
ER2M
030IS
-IS
3 Preset 5.2 0.9 155
Adjust-
able
0.4
  • The minimum radius curve may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.
  • * The high speed is preset to the maximum speed in KITO factory. The speeds are adjustable between High and Low.

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d e m
ER2M001IH-IS 375 450 315 220 515 205
ER2M005IS-IS 395 510
ER2M010IS-IS 435 550
ER2M020IS-IS 585 630 325 225 520 212
ER2M030IS-IS 765 900 340 226 521 215

 

Dual Lifting Speed 500V ‘Pole Change’ – Dual Traversing Speed 500V ‘Pole Change” with Motorized Trolley

The dual speed pole change delivers slowly.

Specifications

※Major capacities example

Code Capacity
(t)
Std.
Lift
(m)
Lifting
Motor
Lifting
Speed
(m/min)
Trav.
Motor
Traversing
Speed
(m/min)
Net
Weight
(kg)
Output
(kW)
50Hz Output
(kW)
50Hz
ER2M001
HD-SD
125kg 3 0.5/0.13 14.2/3.5 0.32/0.08 20/5 66
ER2M005
SD-SD
500kg 0.9/0.23 7.1/1.8 77
ER2M010
SD-SD
1 1.8/0.45 7.2/1.7 92
ER2M020
SD-SD
2 3.5/0.88 6.9/1.6 138
ER2M030
SD-SD
3 4.4/1.0 0.64/0.16 164
  • The minimum radius curve may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d e m
ER2M001HD-SD 375 450 315 268 515 205
ER2M005SD-SD 395 510
ER2M010SD-SD 435 550
ER2M020SD-SD 585 630 325 273 520 212
ER2M030SD-SD 765 900 340 274 521 215

 

Single Lifting Speed – Single Traversing Speed with Motorized Trolley

The single speed delivers high speed and contributes operation efficiency.

Specifications

※Major capacities example

Code Cap.
(t)
Std.
Lift
(m)
Lifting
Motor
Lifting
Speed
(m/min)
Trav.
Motor
Traversing
Speed
(m/min)
Net
Weight (kg)
Output
(kW)
50Hz 60Hz Output
(kW)
50Hz 60Hz
ER2M001H
-S/L
125kg 3 0.56 14.1 16.9 0.4 20
(10)
24
(12)
58
ER2M005S
-S/L
500kg 0.9 7.3 8.8 68
ER2M010S
-S/L
1 1.8 7.1 8.5 84
ER2M020S
-S/L
2 3.5 7.0 8.4 129
ER2M030S
-S/L
3 4.4 5.3 155
  • The bracketed figures in Traversing Speed are low speed.
  • The minimum radius curve may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d e m
ER2M001H-S/L 375 450 315 220 515 205
ER2M005S-S/L 395 510
ER2M010S-S/L 435 550
ER2M020S-S/L 585 630 325 225 520 212
ER2M030S-S/L 765 900 340 226 521 215

Large Capacity with Motorized Trolley

The large capacity model is suitable for using with the middle and large crane.

Specifications

※Major capacities example

Code Cap.
(t)
Std.
Lift
(m)
Lifting
Motor
Lifting
Speed
(m/min)
Trav.
Motor
Traversing
Speed
(m/min)
Net
Weight
(kg)
Output
(kW)
50Hz 60Hz Output
(kW)
50Hz 60Hz
ER2M075
S-L
7.5 3 3.5 1.9 2.3 0.75 10 12 283
ER2M100
L-L
10 1.4 1.7 378
ER2M100
S-L
3.5 × 2 2.9 3.5 0.75 × 2 399
ER2M150
S-L
15 1.9 2.3 571
ER2M200
S-L
20 1.4 1.7 628
  • Trolley wheels for tapered I-beam are provided as standard.
  • The wheels for flat flange beam are also available so make a request in advance if necessary.
  • The minimum radius curve for 7.5 and 10 ton may depend on flange width.
  • For further information, contact KITO and KITO’s global partners.

Dimensions (mm)

※Major capacities example

Code Headroom: C D b d g w
ER2M075S-L 1165 1230 500 284 61 672
ER2M100L-L 1180 1210 80 728
ER2M100S-L 1020 956
ER2M150S-L 1310 1230 1020 86 1129
ER2M200S-L 1345 102 1305

Options

Mechanical Brake with Friction Clutch

This unique KITO device combines the functions of a friction clutch and mechanical brake for capacities of 5 ton or less and requires additional components. (Request this when placing and ordering hoists.)

Overload Limiter

For additional security, an overload limiter (OLL) comes as a recommended option; preset to 115% of rated capacity. The OLL protects the hoist mechanism from damage under overload conditions. (The load can be lowered even after the OLL is triggered.) Adjustable setting: from 90-135% of rated capacity.

Load Bell

The KITO load bell accurately alerts you when your hoist is overloaded as a cost-effective means of enhancing the safety and efficiency of your operations.

High-functional ER2 Series
– Limit Lock Function / – Stepless Switch

Rated Capacity: 125 kg to 5 t (Inverter Only)
  1. Limit Lock Function
    • 1) Upper/Lower Levels Easily Set with Push Button Switches
      • Function: Capable of setting upper/lower limit stop positions for the bottom hook with the push button switch.
      • Number of configurable positions: 1 position each at the upper/lower limit
      • Position detection method: Encoder detection method
      • Stop control: Automatically decelerate to low-speed operation before a limit position.
    • 2) High Speed in No-load
      • Function: Automatically increase to 1.5 times faster than high-speed lifting with a load equivalent to about 20% or lower of the rated capacity.
      • No-load high lifting speed: 1.5 times faster than the rated lifting speed (high speed)
      • Load detection method: Loading factor detection method (current value)
      • Response time: Within about 0.3 second (switching from “high lifting speed” to “no-load high lifting speed”)
  2. Stepless Switch
    • Function: Seamless speed adjustment from high to low depending on how hard the push button is pressed.
    • Speed range: Up to a speed ratio of 1 (high speed): 1/6 (low speed)
    • Effective stroke: Approx. 6.5 mm
    • Detection method: Magnetic field detection by hall element.

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top