KITO Chain Sling 100

Product Made in Japan
Manufacturer: KITO

Supporting ideal lifting work with outstanding quality

Features

KITO link chain grade 10 achieves the world’s strongest level.
Wide range of variations allow selection of the optimum combination for any application.
High product quality realizes safe and highly efficient work.
Advanced chain manufacturing technologies realize outstanding ultimate elongation.
Achievement of outstanding economic efficiency due to the high wear resistance.

Technical Characteristics

KITO’s Sling Chain is High Quality as same as Load Chain used with Hoits.

Advanced Chain Manufacturing Technologies Realize Outstanding Link Chains

[Ultimate Elongation]
KITO link chains have both a high breaking stress and toughness due to the advanced chain manufacturing technologies that are utilized. This is verified by the numerical value of 20% or more achieved for the ultimate elongation based on the JIS standards requirements.
[Bending Capacity]
Concerning the strength in the link bending directin, the use of advanced welding technologies gives the links sufficient absorbability as shown by the photograph (below) of the result of beding test, and no breakage or cracking occours. (However, this does not indicate that the product should be used until it reaches the condition shown in the photograph.)

Wide Range of Variations allow Selection of the Optimum Combination for Any Application

Standard link chains are provided in various diameters from φ6.0 mm to φ20.0 mm to support work lifting heavy and large-sized objects. The link chain and fitting combinations offer clevis-type products with exclusive retaining pins, and eye-type products which use Hicouplings.
Since a wide range of fittings are also available, it is possible to freely select from among single leg, double leg, triple leg, quadruple leg, and endless types to match the usage purpose.

“Adjustment of Length” can be made, which is not Possible when Using Wires

Chain sling can have their lengths adjusted in single link units to conduct load tilt adjustment or quickly change the sling length, which is not possible when using wires. Depending on the application, the shortening clutch (VWW) or grab hook (VGG, HGG) should be used.

When the load will not change for a certain period, use the shortening Clutch (VWW).
This has a chain dropout prevention function so that the chain will not drop out unexpectedly. Once the length has been set, work can be conducted repeatedly.When the load changes frequently, use the Grab Hook (VFF, HGG).
Because attaching and detaching is easy, length adjustment can be swiftly conducted even if the load changes.

Allows Use Even in Severe Working Environments

The KITO Chain Sling 100 [S5 Series] is actively utilized even in severe working environments. Nickel-plated chain specifications, which are resistant to rusting are recomended for environments that are greatly affected by rainwater, seawater, steam and chemicals. Please consult KITO when you intend to use products for special applications such as in acid or alkaline solutions.

Link Chain & Fittings

KITO link chain grade 10 achieves the world’s strongest level.

Specifications

※Major capacities example

Code	Chain Diameter d (mm)	W.L.L. (t)	Pitch p (mm)	Maximum Outside Width bw (mm)	Breaking Force (kN)
SV2060	6.0	1.1	18.0	22.2	56.5
SV2070	7.0	1.5	21.0	25.9	77
SV2080	8.0	2.0	24.0	29.6	101
SV2100	10.0	3.2	30.0	37.0	160
SV2130	13.0	5.2	39.0	48.1	268

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type)

When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
The specifications of clevis-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
Each fitting has the chain pins and spring pins attached.
The weight of each fitting shown in catalogue includes the weights of the chain pins and spring pins.

Fittings (Clevis Type) – Clevis Master Link VE for single leg slings

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	m	t
VE2060	1.1	6	115	56	79	90	11.5
VE2070	1.5	7	131	63	91	100	14
VE2080	2.0	8	130.5	63	91	100	14
VE2100	3.2	10	146	71	105	110	17
VE2130	5.2	13	169.5	80	122	125	21

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Clevis Master Link VD for double leg slings, for triple and quadruple leg slings

Specifications

※Major capacities example

Using Single Connector VA or Dual Connector VB

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	D	T,Q	p	a	b	m	t
VD206	1.7	6	–	125	63	91	100	14
VD20706	2.4	7	6	140	71	105	110	17
VD20807	3.2	8	7	139.5	71	105	110	17
VD21008	5.1	10	8	159	80	122	125	21
VD21310	8.0	13	10	179.5	90	142	140	26

W.L.L.: Working Load Limit (t)
Chain Diameter D,TQ mean the number of sling legs. D: Double leg slings / TQ: Triple and quadruple leg slings

Fittings (Clevis Type) – Single Connector VA

Specifications

※Major capacities example

Code	Chain Diameter (mm)	Dimensions (mm)
Code	Chain Diameter (mm)	p	h	b	l	t
VA2060	6	39.5	38	22	69	7
VA2070	7	43	38	27	75.5	8
VA2080	8	50	44	27	84.5	10
VA2100	10	59	54	34	102	12.5
VA2130	13	80	66	42	132	16

Fittings (Clevis Type) – Dual Connector VB

Specifications

※Major capacities example

Code	Chain Diameter (mm)	Dimensions (mm)
Code	Chain Diameter (mm)	p	h	b	l	t
VB2060	6	39.5	38	48	70	7
VB2070	7	43	38	57	77	8
VB2080	8	50	44	57	86	10
VB2100	10	59	54	72	104	12.5
VB2130	13	80	66	90	134	16

Fittings (Clevis Type) – Sling Hook VSL(VSL3)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VSL3060	1.1	6	85	38	45	24.5	18
VSL3070	1.5	7	100	44	50	30	21.8
VSL3080	2.0	8	99.5	44	50	30	21.8
VSL3100	3.2	10	119	54	56	37.5	27.2
VSL3130	5.2	13	140	66	63	47.5	34.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Foundry Hook VF

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VF2060	1.1	6	100	32	53	26	21.5
VF2070	1.5	7	120.4	40	64	31	25.5
VF2080	2.0	8	120.4	40	64	31
VF2100	3.2	10	131	50	76	34
VF2130	5.2	13	165	58	89	44.5	40

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Grab Hook VG

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	m	s
VG2060	1.1	6	50.5	30	8	20.5
VG2070	1.5	7	65.5	37	10	27.5
VG2080	2.0	8	65	37	10	27.5
VG2100	3.2	10	80	45	13	36
VG2130	5.2	13	105.5	56	16	47

W.L.L.: Working Load Limit (t)
In the situation of using the Grab Hook VG in combination with the chain, the working load limits will become 70% of the values in the above table.

Fittings (Clevis Type) – Shortening Clutch VW

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	m	r	l
VW2060	1.1	6	45	30	8	24	74
VW2070	1.5	7	56	35	8.6	27.5	92.5
VW2080	2.0	8	56	35	9.6	30.5	92.5
VW2100	3.2	10	78	47	12.5	38.5	125.5
VW2130	5.2	13	90	58	15	50.5	146.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Shackle VN

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	d
VN2060	1.1	6	65	26.5	50	43	14
VN2070	1.5	7	70.5	30.5	60	47.5	17
VN2080	2.0	8	70	30.5	60	47.5	17
VN2100	3.2	10	79.5	34	68	53	20
VN2130	5.2	13	99.5	43	85	67	25

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Single Connector VC

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	l	t
VC2060	1.1	6	50	18.5	45	77.5	13.5
VC2070	1.5	7	65	26.5	60	99.5	17
VC2080	2.0	8	64.5	26.5	60	99.5	17
VC2100	3.2	10	79	32.5	74	123	21.5
VC2130	5.2	13	99.5	42	94	154	26.5

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Endless Connector VR

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	l
VR2060	1.1	6	25.5	38	55
VR2070	1.5	7	31	44	67
VR2080	2.0	8	30	44	67
VR2100	3.2	10	39	54	86
VR2130	5.2	13	50	66	108

W.L.L.: Working Load Limit (t)

Fittings (Clevis Type) – Sling Hook (Small Hook) VSL(VSL2)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	b	n	s	t
VSL2060	1.1	6	69	29.5	29.5	20.5	15
VSL2070	1.5	7	95	36	39	28	19
VSL2100	3.2	10	110	44.5	47	33	25
VSL2130	5.2	13	136	51	58	41	30
VSL2160	8.0	16	155	67	64	49	37.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type)

When assembling the fittings components, assemble them correctly according to the separate “Assembly Manual”.
The specifications of eye-type fittings components are shown in the tables below. For the link chain specification table, refer to page 4.
In addition to using the eye-type components by assembling them as KITO Chain Sling 100 products, they can also be used for many other purposes.
Each fitting is not provided with a Hi-coupling HC. This should be ordered at the same time when placing the order for the fitting.

Fittings (Eye Type) – Master Link HM

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	S	D	p	a	d	t
HM20706	1.1	6	–	110	60	13	11
HM20706	1.7	7	6			13	11
HM20807	2.4	8	7			16	14
HM21008	3.2	10	8	135	75	18	15
HM21310	5.2	13	10	160	90	22	18.5
HM21613	8.0	16	13	180	100	26	22

W.L.L.: Working Load Limit (t)
Chain Diameter S,D mean the number of sling legs. S: Single leg slings / D: Double leg slings

Fittings (Eye Type) – Sling Hook HTL(HTL3)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HTL3060	1.1	6	100	23	11	45	24.5
HTL3080	1.5	7	120	27	13.5	50	30
HTL3080	2.0	8	120	27	13.5	50	30
HTL3100	3.2	10	140	32.5	17	56	37.5
HTL3130	5.2	13	171	38	21.5	63	47.5
HTL3160	8.0	16	200	46	26.5	75	60

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Self Locking Hook HJ

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HJ2060	1.1	6	109	19.5	11	34.5	20.5
HJ2080	1.5	7	135	24.5	12	43.5	25.5
HJ2080	2.0	8	135	24.5	12	43.5	25.5
HJ2100	3.2	10	168	32	16	56	30.5
HJ2130	5.2	13	205	38.5	20	69	39.5
HJ2160	8.0	16	251	48	27	80	49

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Swivel Hook HK

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	n
HK2060	1.1	6	158	35.5	14	26	34.5
HK2080	1.5	7	182				43.5
HK2080	2.0	8	182				43.5
HK2100	3.2	10	217	43.5	17.5	33	56
HK2130	5.2	13	271	48.5	22.5	43	69

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Foundry Hook HQ

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HQ2060	1.1	6	102.5	13.5	12.5	53	26
HQ2080	1.5	7	125	22.5	15	62	31.5
HQ2080	2.0	8	125	22.5	15	62	31.5
HQ2100	3.2	10	150	30	16.5	76	34
HQ2130	5.2	13	173	25.5	20.5	89	44.5
HQ2160	8.0	16	210	45	26	101	50.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Grab Hook HH

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	m	s
HH2060	1.1	6	51.5	12	10	8	20.5
HH2080	1.5	7	69	15.5	12.5	10	27
HH2080	2.0	8	69	15.5	12.5	10	27
HH2100	3.2	10	86.5	20.5	17.5	13	36
HH2130	5.2	13	110.5	23.5	19.5	16	47.5
HH2160	8.0	16	129	30	23	19	60.5

W.L.L.: Working Load Limit (t)
In the situation of using the Grab Hook HH in combination with the chain, the working load limits will become 70% of the values in the above table.

Fittings (Eye Type) – Hi-coupling HC

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	c	d
HC3060	1.1	6	48	16.8	45	17.5	8
HC3070	1.5	7	55	19.4	51	19	9.4
HC3080	2.0	8	63	22	57	23	10.6
HC3100	3.2	10	75	26.5	70	27	13.1
HC3130	5.2	13	96	34	89	36	16.8

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Sling Hook (Small Hook) HTL(HTL2)

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	b	n	s
HTL2060	1.1	6	81	18.5	11.5	29.5	20.5
HTL2080	1.5	7	101	23.5	11	39	27
HTL2080	2.0	8	101	23.5	11	39	27
HTL2100	3.2	10	131	32.5	16	47	33
HTL2130	5.2	13	159	41.5	19	58	43
HTL2160	8.0	16	183	48	24.5	64.5	48.5

W.L.L.: Working Load Limit (t)

Fittings (Eye Type) – Master Link with Sub Links HMS for triple and quadruple Leg slings

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)	Dimensions (mm)
Code	W.L.L. (t)	Chain Diameter (mm)	p	a	d
HMS2060	2.6	6	135	75	18
HMS2070	3.2	7	135	75	18
HMS2080	4.2	8	160	90	22
HMS2100	6.4	10	180	100	26
HMS2130	10.4	13	200	110	32

W.L.L.: Working Load Limit (t)
The Master Link with Sub Links is a master link that has sub links attached. It should be used with triple leg slings or quadruple leg slings. Because the working load limits are different from those of the Master Link HM (page 10), it has exclusive “Slinging Methods and W.L.L. (Working Load Limits)”. Please refer to “When using the Master Link HMS” described on page 5.

Fittings (Eye Type) – Large Master Link HL/HLD

Specifications

※Major capacities example

Code	W.L.L. (t)	Chain Diameter (mm)		Dimensions (mm)
Code	W.L.L. (t)	S	D	p	a	d	t
HL020	1.1	6	–	225	112	17	13
	1.5	7	–
	1.7	–	6
	2.0	8	7
HL030	3.2	10	8			20	16
HL050	5.0	13	10			23	19.5

W.L.L.: Working Load Limit (t)
Chain Diameter S,D mean number of chain. S: Single sling / D: Double sling

Standard Sling Types

Standard Sling Types (Clevis Type SCP2)

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Clevis Type SCP2) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-VE-VE	S-VE-VSS	S-VE-VF	S-VE-VG*	S-VE-VC	S-VE-VN	S-VE-VW	S-VSS-VSS	S-VSS-VG*	S-VSS-VW	S-VW-VW
1.1	6 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.14
1.1	6 (× 1)	Weight	1.8	2.0	2.1	1.7	1.7	2.0	1.7	2.2	1.9	1.9	0.46
1.5	7 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.17
1.5	7 (× 1)	Weight	2.7	3.0	3.2	2.5	2.6	3.0	2.6	3.3	2.9	2.9	1.0
2.0	8 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.18
2.0	8 (× 1)	Weight	3.1	3.4	3.5	2.9	3.0	3.4	3.0	3.7	3.3	3.4	1.1
3.2	10 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5	0.24
3.2	10 (× 1)	Weight	4.9	5.6	5.5	4.9	4.9	5.4	5.1	6.3	5.6	5.7	2.4
5.2	13 (× 1)	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0	0.29
5.2	13 (× 1)	Weight	10.8	12.4	12.2	11.0	10.9	11.6	10.8	13.7	12.3	12.1	4.0

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Clevis Type SCP2) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-VD-VSS	D-VD-VF	D-VD-VC	D-VD-VN	D-VD-OO
1.7	6 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 (× 2)	Weight	3.9	4.2	3.4	3.9	3.0
2.4	7 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	7 (× 2)	Weight	5.9	6.2	5.1	5.8	4.3
3.2	8 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 (× 2)	Weight	6.7	6.9	5.8	6.6	5.1
5.1	10 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.1	10 (× 2)	Weight	11.1	11.1	10.0	11.0	8.3
8.0	13 (× 2)	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 (× 2)	Weight	24.1	24.3	21.7	23.1	18.5

Standard Sling Types (Clevis Type SCP2) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-VD-VSS	T-VD-VF	T-VD-VC	T-VD-VN
2.4	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.4	6 (× 3)	Weight	6.4	6.9	5.7	6.4
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.9	9.4	7.7	8.9
5.0	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
5.0	8 (× 3)	Weight	11.2	11.4	10.1	11.0
8.0	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
8.0	10 (× 3)	Weight	18.8	18.8	17.1	18.6
12.5	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
12.5	13 (× 3)	Weight	40.5	40.8	36.0	38.1

Standard Sling Types (Clevis Type SCP2) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-VD-VSS	Q-VD-VF	Q-VD-VC	Q-VD-VN	Q-VD-OO
2.4	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	6 (× 4)	Weight	8.2	8.7	7.1	8.1	6.2
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	11.5	12.0	9.8	11.3	8.0
5.0	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 (× 4)	Weight	14.3	14.4	12.6	13.9	10.8
8.0	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 (× 4)	Weight	24.0	23.6	21.3	23.3	18.0
12.5	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0	2.0
12.5	13 (× 4)	Weight	51.8	51.3	44.9	47.7	39.0

Standard Sling Types (Eye Type SCE2)

A wide range of types of Standard Sling Types, from single leg slings to quadruple leg slings, are available as KITO Chain Sling 100 products. These should be selected to match the usage purpose. Further, since the assembly is extremely simple to carry out, link chains and fittings can be prepared as components in factories and work places so that they can be assembled for use whenever necessary to match the usage purpose.
Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HM-HM	S-HM-HTS	S-HM-HJ	S-HM-HK	S-HM-HQ	S-HM-HH*	S-HTS-HTS	S-HTS-HH
1.1	6 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
1.1	6 (× 1)	Weight	1.8	2.0	2.0	2.1	2.1	1.7	2.1	1.9
1.5	7 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
1.5	7 (× 1)	Weight	2.4	2.9	2.9	3.0	2.9	2.5	3.3	3.0
2.0	8 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
2.0	8 (× 1)	Weight	3.1	3.4	3.6	3.6	3.5	3.1	3.7	3.4
3.2	10 (× 1)	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5	1.5	1.5
3.2	10 (× 1)	Weight	5.1	5.8	5.8	6.1	6.0	5.2	6.5	5.9
5.2	13 (× 1)	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0	2.0	2.0
5.2	13 (× 1)	Weight	10.7	12.1	12.1	12.8	11.9	11.4	13.5	12.8

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Eye Type SCE2) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HM-HTS	D-HM-HJ	D-HM-HK	D-HM-HQ	D-HM-OO
1.7	6 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 (× 2)	Weight	3.6	3.7	3.8	3.9	2.7
2.4	7 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	7 (× 2)	Weight	5.6	5.7	5.9	5.6	3.9
3.2	8 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 (× 2)	Weight	6.6	6.8	7.0	6.8	5.1
5.1	10 (× 2)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.1	10 (× 2)	Weight	11.1	11.3	11.6	11.5	8.2
8.0	13 (× 2)	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 (× 2)	Weight	23.5	23.5	24.3	23.1	17.7

Standard Sling Types (Eye Type SCE2) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HM-HTS	T-HM-HJ	T-HM-HK	T-HM-HQ
2.4	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.4	6 (× 3)	Weight	5.7	5.8	6.0	6.1
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.5	8.9	9.2	8.8
5.0	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
5.0	8 (× 3)	Weight	10.7	10.8	11.0	10.9
8.0	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
8.0	10 (× 3)	Weight	17.9	18.2	18.7	18.5
12.5	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
12.5	13 (× 3)	Weight	36.8	37.7	38.9	36.2

Standard Sling Types (Eye Type SCE2) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit ) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HM-HTS	Q-HM-HJ	Q-HM-HK	Q-HM-HQ	Q-HM-OO
2.4	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
2.4	6 (× 4)	Weight	7.3	7.4	7.7	7.8	5.5
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	10.9	11.4	11.8	11.3	7.7
5.0	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 (× 4)	Weight	13.4	13.6	13.9	13.7	10.2
8.0	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 (× 4)	Weight	22.4	22.8	23.5	23.2	16.3
12.5	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0	2.0
12.5	13 (× 4)	Weight	46.5	47.7	49.3	45.7	35.5

Standard Sling Types (Eye Type SCE2 (HMS)) Master Link HMS with Sub Links

Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2 (HMS)) – Triple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HMS-HTS	T-HMS-HJ	T-HMS-HK	T-HMS-HQ
2.6	6 (× 3)	Reach: L	1.5	1.5	1.5	1.5
2.6	6 (× 3)	Weight	6.0	6.1	6.3	6.4
3.2	7 (× 3)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 3)	Weight	8.5	8.9	9.1	8.7
4.2	8 (× 3)	Reach: L	1.5	1.5	1.5	1.5
4.2	8 (× 3)	Weight	10.5	10.9	11.1	10.8
6.4	10 (× 3)	Reach: L	1.5	1.5	1.5	1.5
6.4	10 (× 3)	Weight	17.2	17.5	18.0	17.8
10.4	13 (× 3)	Reach: L	2.0	2.0	2.0	2.0
10.4	13 (× 3)	Weight	35.6	36.5	37.7	35.0

Standard Sling Types (Eye Type SCE2 (HMS)) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HMS-HTS	Q-HMS-HJ	Q-HMS-HK	Q-HMS-HQ
2.6	6 (× 4)	Reach: L	1.5	1.5	1.5	1.5
2.6	6 (× 4)	Weight	7.6	7.7	8.0	8.1
3.2	7 (× 4)	Reach: L	1.5	1.5	1.5	1.5
3.2	7 (× 4)	Weight	10.9	11.4	11.8	11.2
4.2	8 (× 4)	Reach: L	1.5	1.5	1.5	1.5
4.2	8 (× 4)	Weight	13.3	13.7	14.0	13.6
6.4	10 (× 4)	Reach: L	1.5	1.5	1.5	1.5
6.4	10 (× 4)	Weight	21.7	22.1	22.8	22.5
10.4	13 (× 4)	Reach: L	2.0	2.0	2.0	2.0
10.4	13 (× 4)	Weight	45.3	46.5	48.1	44.5

Standard Sling Types (Eye Type SCE2 (HL/HLD)) Master Link HL/HLD

Reaches (L dimensions) other than the values described in the table can also be supported, so please contact your KITO dealer for more information.
The Standard Sling Types photographs show images of assembled products. The actual number of chain links will differ according to the L dimension, so please contact your KITO dealer for more information.

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Single Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HL-HL	S-HL-HTS	S-HL-HJ	S-HL-HK	S-HL-HQ	S-HL-HH^※
1.1	6（×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
1.1	6（×1）	Weight	3.7	2.9	2.9	3.0	3.1	2.7
1.5	7 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
1.5	7 （×1）	Weight	4.1	3.7	3.8	3.9	3.8	3.3
2.0	8 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
2.0	8 （×1）	Weight	4.1	3.9	4.0	4.1	4.0	3.5
3.2	10 （×1）	Reach: L	1.5	1.5	1.5	1.5	1.5	1.5
3.2	10 （×1）	Weight	6.1	6.2	6.3	6.5	6.4	5.6
5.0	13 （×1）	Reach: L	2.0	2.0	2.0	2.0	2.0	2.0
5.0	13 （×1）	Weight	11.1	12.3	12.6	13.0	12.1	11.6

W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t)	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	S-HLD-HLD	S-HLD-HTS	S-HLD-HJ	S-HLD-HQ	S-HLD-HH
8.0	16 （×1）	Reach: L	2.5	2.5	2.5	2.5	2.5
8.0	16 （×1）	Weight	29.7	28.6	28.4	27.9	26.8
11.5	20 （×1）	Reach: L	3.0	3.0	–	3.0	3.0
11.5	20 （×1）	Weight	47.2	49.0	–	46.2	43.5

For slinging methods that have a “*” mark, in situations where the chain is used by hooking on a grab hook (in order to adjust the length, etc.) the working load limits will become 70% of the values shown in the above table. For more details, refer to “Method of Lifting and Working Load Limits” on page 5.

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Double Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HL-HTS	D-HL-HJ	D-HL-HK	D-HL-HQ	D-HL-OO
1.7	6 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
1.7	6 （×2）	Weight	4.7	4.6	4.8	4.9	3.7
2.0	7 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
2.0	7 （×2）	Weight	6.2	6.5	6.6	6.4	4.6
3.2	8 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	8 （×2）	Weight	7.0	7.2	7.4	7.2	5.5
5.0	10 （×2）	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	10 （×2）	Weight	11.3	11.5	11.9	11.7	8.3

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	D-HLD-HTS	D-HLD-HJ	D-HLD-HK	D-HLD-HQ	D-HLD-OO
8.0	13 （×2）	Reach: L	2.0	2.0	2.0	2.0	2.0
8.0	13 （×2）	Weight	30.3	30.3	31.1	29.9	24.5
11.5	16 （×2）	Reach: L	2.5	2.5	–	2.5	2.5
11.5	16 （×2）	Weight	55.6	55.2	–	54.2	44.9

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Triple Leg Sling

Specifications

※Major capacities example.

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HL-HTS	T-HL-HJ	T-HL-HK	T-HL-HQ
2.0	6 （×3）	Reach: L	1.5	1.5	1.5	1.5
2.0	6 （×3）	Weight	6.2	6.1	6.4	6.6
3.2	7 （×3）	Reach: L	1.5	1.5	1.5	1.5
3.2	7 （×3）	Weight	8.9	9.3	9.4	9.2
5.0	8 （×3）	Reach: L	1.5	1.5	1.5	1.5
5.0	8 （×3）	Weight	10.8	11.2	11.4	11.0

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	T-HLD-HTS	T-HLD-HJ	T-HLD-HK	T-HLD-HQ
8.0	10 （×3）	Reach: L	1.5	1.5	1.5	1.5
8.0	10 （×3）	Weight	23.9	24.2	24.7	24.5
11.5	13 （×3）	Reach: L	2.0	2.0	2.0	2.0
11.5	13 （×3）	Weight	43.7	44.6	45.8	43.1

Standard Sling Types (Eye Type SCE2 (HL/HLD)) – Quadruple Leg Sling

Specifications

※Major capacities example

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HL-HTS	Q-HL-HJ	Q-HL-HK	Q-HL-HQ	Q-HL-OO
2.0	6 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
2.0	6 （×4）	Weight	7.7	7.6	7.9	8.2	5.8
3.2	7 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
3.2	7 （×4）	Weight	11.3	11.7	11.9	11.6	8.0
5.0	8 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
5.0	8 （×4）	Weight	13.4	13.9	14.2	13.7	10.3

W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Code
W.L.L. (Working Load Limit) (t) θ=60°	Chain Diameter (mm) (× Number of Chains)	Dimensions (mm) Mass (Weight) (kg)	Q-HLD-HTS	Q-HLD-HJ	Q-HLD-HK	Q-HLD-HQ	Q-HLD-OO
8.0	10 （×4）	Reach: L	1.5	1.5	1.5	1.5	1.5
8.0	10 （×4）	Weight	28.0	28.4	29.1	28.8	21.9
11.5	13 （×4）	Reach: L	2.0	2.0	2.0	2.0	2.0
11.5	13 （×4）	Weight	52.9	54.1	55.7	52.1	41.9

Chain, Japan, KITO, Lifting

Features

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Standard Sling Types (Eye Type SCE2 (HMS)) – Quadruple Leg Sling

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example

Specifications

※Major capacities example.

Specifications

※Major capacities example

Related Products

Namita Kiko Welded Anchor metals

Eagle Jack ED-200-PG-75H-200 Hydraulic Bottle Jack

Eight Tool EXT-S6D T-handle

Ross Asia Miniature precision series Port sizes 1/8″ and 1/4″. Flow rates up to 40 scfm (1133 l/min)

Chiyoda Tsusho 3FA2M-6.5H/3FA3M-6.5H/3FA2M-8H/3FA3M-8H FREE ANGLE CONNECTOR ST TYPE

Organo Powdered Activated Carbon Injection Equipment Wet Carbon Continuous Dissolution System

REQUEST QUOTATION

PAYMENT

MAKER

TOOLS & EQUIPMENT

PLANT FACILITIES

CONSTRUCTION

STEEL MATERIAL

LINK

kouei_trading

Weight Calculation