KOGANEI CORPORATION | Kouei Japan Trading | Get Quotation

Koganei Compact 2- And 3-Port Media Isolation PVR Series

kvt part2 — Tue, 29 Dec 2020 10:50:10 +0000

Manufacturer: KOGANEI CORPORATION

Features

This lineup adds FKM specifications that suit cleaning processes for medical analysis, and the PVR20 model specifically supports these demanding applications. As a result, users gain greater reliability during frequent cleaning cycles. Moreover, the compact valve design delivers a large flow rate, which improves efficiency in medical analysis systems.

In addition, the lineup includes the PVR16 with a 1.6 millimeter orifice and the PVR20 with a 2.0 millimeter orifice, so users can select the optimal size for their process. Furthermore, the rocker type structure minimizes changes to internal volume, which enhances dispensing stability and accuracy. At the same time, the wetted area remains metal free, and this feature significantly improves corrosion resistance.

Additionally, a power saving circuit comes standard, so the system achieves low power consumption without sacrificing performance. As a result, long term operation becomes more economical. Moreover, the design supports a long service life of up to ten million cycles under Koganei testing conditions, which increases overall reliability.

Finally, the lineup offers both solenoid valve types and air operated types for the PVR16 model, which expands application flexibility. In addition, the PVR20 model supports an operating pressure of up to 0.3 megapascals, or 44 psi, so it delivers stable performance across a wide range of medical analysis environments.

Specifications

Item		PVRA16-2	PVRA16	PVR16-2	PVR16	PVR20-2	PVR20
Type of valve operation		Air-operated valve (internal pilot type)		Solenoid valve (direct acting type)		Solenoid valve (direct acting type)
Valve configuration		Diaphragm type poppet (rocker-type)		Diaphragm type direct poppet (rocker-type)		Diaphragm type direct poppet (rocker-type)
Number of ports (Valve function)		2 (Normally closed (NC))	3	2 (Normally closed (NC))	3	2 (Normally closed (NC))	3
Media		Air, water, pure water, chemical solution^{Note 1}
Operating pressure range	Main valve part MPa [psi]	−0.075 to 0.2 [−11 to 29] (COM→NC, NO)^{Note 2}				−0.075 to 0.3 [−11 to 44] (COM→NC, NO)^{Note 2}
	Air-operated part MPa [psi]	0.15 to 0.30 [22 to 44]		—
Pressure resistant	Main valve part MPa [psi]	0.3 [44]				0.45 [65]
	Air-operated part MPa [psi]	0.4 [58]		—
Orifice diameter		mm [in.]	1.6 [0.063]			2 [0.079]
Flow rate characteristics	Base mounting	Water: Cv value of 0.04 Air: C value of 0.16 [dm³/(s·bar)]				Water: Cv value of 0.065 Air: C value of 0.23 [dm³/(s·bar)]
	Direct piping	Water: Cv value of 0.04 Air: C value of 0.16 [dm³/(s·bar)]				Water: Cv value of 0.065 Air: C value of 0.23 [dm³/(s·bar)]
Capacity in the valve chamber^{Note 3}		μl	35				60
Amount of leakage		cm³/min	Both inside and outside are 0 (with water pressure)
Response time^{Note 4}		ms	—		Under 15 (under 20 if Kalrez) (with air pressure)		Under 15 (with air pressure)
Maximum operating frequency		Hz	2
Operating temperature range		°C [°F]	0 to 50 [32 to 122]
Operating temperature range for media used		°C [°F]	0 to 50 [32 to 122] (non-condensation)
Mass	No sub plate	g [oz]	7 [0.25]	20 [0.71]	22 [0.78]	42 [1.48]	43 [1.52]
	Sub plate attached	g [oz]	14 [0.49]	27 [0.95]	—	50 [1.76]	—
	Direct piping	g [oz]	—	—	22 [0.78]	—	43 [1.52]
Mounting direction		Any

The post Koganei Compact 2- And 3-Port Media Isolation PVR Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Compact 2-Port And 3-Port Valves For Chemical Solutions PVS Series

kvt part2 — Tue, 29 Dec 2020 10:43:14 +0000

Manufacturer: KOGANEI CORPORATION

Features

This design uses indirect acting 2 and 3 port solenoid valves with a 1.5 millimeter orifice diameter and a 12 millimeter valve width, and it supports reliable handling of chemical solutions. As a result, the system fits perfectly in dispensing processes for analyzers. Moreover, the valve structure considers smooth flow inside the valve chamber, which improves stability and accuracy during operation.

In addition, the indirect acting design prevents heat transfer to the media, so it helps maintain consistent chemical properties. Furthermore, the manifold structure allows free combination, and users can mount up to twenty valves to create flexible and scalable systems. Consequently, this configuration delivers efficient layout design, precise dispensing control, and high adaptability across analytical and chemical processing applications.

Specifications

Item	Model	PVS2	PVS2-E1	PVS3	PVS3-E1
Valve		Air operated valve	Solenoid valve	Air operated valve	Solenoid valve
Numbers of positions and ports		2-position, 2-port valve		2-position, 3-port valve
Operation method		Air pilot
Valve function		Normally closed		Universal
Media		Air, water, pure water, and chemical solution^{Note 1}
Orifice diameter	mm	φ1.5
Port size		φ3.2 nipple (POM), M6×1 female thread
Operating pressure range	MPa	A/B ⇔ COM: −0.054 to 0.2
Proof pressure	MPa	0.3
Pilot operating pressure	MPa	0.15 to 0.3
Pilot proof pressure	MPa	0.4
Leakage (at diaphragm portion)	cm³/min	0 for both internally and externally
Operating temperature range	°C	5 to 45
Operating media temperature range	°C	5 to 45 (non-condensation)
Operating frequency	Hz	2
Rated voltage	V	—	12VDC / 24VDC (5VDC / 6VDC)^{Note 2}	—	12VDC / 24VDC (5VDC / 6VDC)^{Note 2}
Operating voltage range	V	—	Rated voltage ±10%	—	Rated voltage ±10%
Power consumption	W	—	1.2	—	1.2

The post Koganei Compact 2-Port And 3-Port Valves For Chemical Solutions PVS Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei DB Scale Separator

kvt part2 — Tue, 29 Dec 2020 10:31:21 +0000

Manufacturer: KOGANEI CORPORATION

Features

This system uses a dielectric breakdown electrolysis method with a titanium plate electrode, and it benefits from both Japanese and international patent protection. As a result, the design delivers advanced and reliable electrolysis performance. Moreover, the unique characteristics of the titanium electrode enable separation and removal of even ionized silica, which conventional systems struggle to eliminate. Therefore, the system achieves higher purification efficiency.

In addition, the process operates without using chemicals, and this approach prevents equipment damage while extending overall service life. Furthermore, chemical free operation removes concerns about emission control related to chemically treated water. Consequently, the system supports safer operation, lower maintenance requirements, and long term environmental compliance.

Specifications

Item	Model	DBSS100C	DBSS50C	DBSS50A-2W	DBSS50A-9W	DBSS50A-5W
Outer dimensions	mm [in]	1802 × 860 × 1396 [71 × 33.9 × 55]	1396 × 860 × 1396 [55 × 33.9 × 55]	739 × 727 × 1307 [29.1 × 28.6 × 51]	834 × 700 × 1200 [25.0 × 27.6 × 47]	510 × 526 × 991 [20.1 × 20.7 × 39.0]
Dry mass	kg [lb]	430 [948.0]	315 [694.5]	170 [374.8]	130 [286.6]	73 [160.937]
Total water volume in tank	ℓ	470	325	160	160	32
Drained amount	ℓ/day	645	510	160	160	32
Main unit connection port	IN	1-inch 25A barb fitting		1/2-inch 15A barb fitting	Rc 1/2-inch 15A	1/2-inch 15A barb fitting
	OUT	2-inch 50A barb fitting		1-1/4-inch 32A barb fitting	Rc 1-inch 25A	1-inch 25A barb fitting
	Drain	2-inch 50A barb fitting × 2		1-1/4-inch 32A barb fitting	1-1/4-inch 32A barb fitting	1-inch 25A barb fitting
Input current		Single phase 200 VAC 50/60Hz
Consumption power	kW	0.6	0.5	0.3	0.3	0.15
Annual component removal volume^Note	kg [lb]	100 [220.5]	50 [110.231]	25 [55.116]		5 [11.023]

The post Koganei DB Scale Separator first appeared on Kouei Japan Trading | Get Quotation.

Koganei DB Scale Separator: Module Type

kvt part2 — Tue, 29 Dec 2020 10:16:20 +0000

Manufacturer: KOGANEI CORPORATION

Features

Depending on the heat load size, the system allows selection of multiple electrolysis tanks connected in series, which improves scalability and flexibility. As a result, users can easily increase the number of tanks to match changing capacity requirements. Moreover, split shipment simplifies installation and transportation, so handling becomes faster and more efficient. In addition, this approach reduces installation complexity, and it significantly lowers overall installation costs while maintaining reliable system performance.

Specifications

Item	Name	Device main unit (1 tank to 4 tanks)				Electrolysis tank for expansion	Junction terminal box
Model		DBSS50A-21W	DBSS50A-22W	DBSS50A-23W	DBSS50A-24W	DBSS50A-25W	DBSS50A-26W
Outer dimensions	mm [in]	700 × 600 × 1200 [27.6 × 23.6 × 47]	1200 × 600 × 1200 [47 × 23.6 × 47]	1700 × 600 × 1200 [67 × 23.6 × 47]	2200 × 600 × 1200 [87 × 23.6 × 47]	500 × 600 × 1200 [19.7 × 23.6 × 47]	235 × 78 × 190 [9.3 × 3.071 × 7.5]
Dry mass	kg [lb]	130 [286.6]	190 [418.9]	250 [551.2]	310 [683.4]	60 [132.277]	1 [2.205]
Electrolysis tank	Capacity ℓ	Total water capacity 160	Total water capacity 320	Total water capacity 480	Total water capacity 640	Total water capacity 160	–
Electrolysis tank	Breakdown	(Electrolysis tank 105, setting tank 55 = 160) ×1 tank	(Electrolysis tank 105, setting tank 55 = 160) ×2 tanks	(Electrolysis tank 105, setting tank 55 = 160) ×3 tanks	(Electrolysis tank 105, setting tank 55 = 160) ×4 tanks	(Electrolysis tank 105, setting tank 55 = 160) tank 55 = 160	–
Maximum processing flow rates		To 5 ℓ/min (0.3 m³/hr)	To 10 ℓ/min (0.6 m³/hr)	To 15 ℓ/min (0.9 m³/hr)	To 20 ℓ/min (1.2 m³/hr)	To 5 ℓ/min (0.3 m³/hr)	–
Scale and corrosive element removal volume^*	kg [lb]/365 days	To 25 [55.116]	To 50 [110.231]	To 75 [165.347]	To 100 [220.5]	–	–
Drained amount	ℓ/day	160	320	480	640	160	–
Main unit connection port	IN connection port diameter	Rc 1-1/2 inch 15A					–
	Drain connection port diameter	Rc 1-1/2 inch 40A					–
	OUT connection port diameter	(1-1/4-inch 32A barb) × 1	(1-1/4-inch 32A barb) × 2	(1-1/4-inch 32A barb) × 3	(1-1/4-inch 32A barb) × 4	(1-1/4-inch 32A barb) × 1	–
Input current		Single phase 200 VAC 50/60 Hz					–
Consumption power	kW	0.3	0.5	0.5	0.6	–	–
Paint color		5Y7/1 beige					–
Protection level		IP-44 compliant (outdoor specifications)					IP-44 compliant (outdoor specifications)
Alarm output		① Electrode plate life ^* Alarm generation: Lights and device operates ② Valve abnormality (drain discharge, IN side supply water abnormality) ③ Power supply abnormality ^* Alarm generation, device stops					–
Supported cleaning towers		To 150RT	150 to 300RT	300 to 450RT	450 to 600RT	To 150RT	–

The post Koganei DB Scale Separator: Module Type first appeared on Kouei Japan Trading | Get Quotation.

Koganei Cleanliness Monitor CC Monitor

kvt part2 — Tue, 29 Dec 2020 10:09:21 +0000

Manufacturer: KOGANEI CORPORATION

Features

Constant monitoring checks cleanliness across the entire work area, and it maintains a consistently controlled environment. As a result, the system detects issues early and supports stable operations. Moreover, multi point constant monitoring enables fast identification of contamination sources, which helps teams address root causes quickly and prevent recurring problems.

The post Koganei Cleanliness Monitor CC Monitor first appeared on Kouei Japan Trading | Get Quotation.

Koganei Chou! Otetekirei (Slightly Acidic Hypochlorite Water Generator)

kvt part2 — Tue, 29 Dec 2020 09:59:09 +0000

Manufacturer: KOGANEI CORPORATION

Features

This device generates electrolyzed water, and it effectively eliminates bacteria and viruses during hand washing. As a result, users achieve reliable hygiene while maintaining gentle contact with the skin. Moreover, the system combines tap water with a saline solution for adjustment, and it then produces electrolyzed hypochlorous acid water, which is properly known as slightly acidic hypochlorous acid water.

In addition, the generated water maintains slight acidity and low chlorine concentration, which stays close to neutral. Therefore, it remains easy on the hands while still delivering strong sterilization performance against microorganisms. Furthermore, the water operates within a pH range of 5.5 to 6.5, and it provides an effective chlorine concentration of 10 to 15 milligrams per liter. Consequently, this balance ensures both safety and effectiveness.

Finally, the EHP60 generated water demonstrates outstanding sterilization properties, and it works effectively against a wide range of bacteria and viruses. As a result, the system supports consistent, high level sanitation in medical, food processing, and public hygiene environments.

Specifications

The post Koganei Chou! Otetekirei (Slightly Acidic Hypochlorite Water Generator) first appeared on Kouei Japan Trading | Get Quotation.

Koganei Controller For Control Valves KFPC1 For Proportional Control Valves KFPV050 And KFPV300 Series

kvt part2 — Tue, 29 Dec 2020 09:43:10 +0000

Manufacturer: KOGANEI CORPORATION

Features

This system supports initialization without any external input, and it uses an initial setting support circuit to simplify setup. As a result, users can start operation quickly and reduce commissioning time. Moreover, the design ensures smooth compatibility with proportional control valves in the KFPV050 and 300 series. Therefore, the system delivers reliable integration, improved efficiency, and stable control performance across a wide range of applications.

Specifications

Model		KFPC1-F07-DN 24 VDC
Mounting methods		DIN rail mounting
Signal input		4 ～ 20 mA	0 ～ 10 V
Input impedance	Ω	220	1.2M
Power supply voltage		24 VDC ±10%
Valve control signal		PWM (pulse width modulation)
Ambient temperature range (ambient atmosphere)	°C [°F]	0 ～ 50 [32 ～ 122] (non-condensation)
Maximum allowable load current	A	1.1
Power consumption (control circuit)	W	0.55
Monitor signal		Directly proportional to solenoid current 1 mV = 1 mA
RAMP response time	s	0 ～ 10

The post Koganei Controller For Control Valves KFPC1 For Proportional Control Valves KFPV050 And KFPV300 Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Proportional Control Valves KFPV300 Series Rc3/8, Rc1/2 Direct Acting 2-port Valve, Plunger Type

kvt part2 — Mon, 28 Dec 2020 16:38:18 +0000

Manufacturer: KOGANEI CORPORATION

Features

This proportional control valve delivers seamless control of both gases and liquids, and it maintains high accuracy throughout operation. As a result, it achieves excellent repeatability, fast response accuracy, and low hysteresis. Moreover, the precise control performance supports stable and predictable process results. In addition, the valve operates in combination with a dedicated controller, which further enhances accuracy and ensures reliable proportional control across demanding applications.

Specifications

Basic type	KFPV300
Media^{Note 1}	Air, neutral gas, water (other gases and liquids that do not affect component parts)
Seal material	FKM, EPDM
Material for the body	Stainless steel
Temperature range for media used	−10 to 90 °C [14 to 194 °F] (non-freezing)
Operation system	Direct drive type
Ambient temperature range (ambient atmosphere)	0 to 55 °C [32 to 131 °F]
Media viscosity	Less than 21 × 10⁻⁶
Mounting direction^{Note 2}	Any
Protection level	IP65 compliant

The post Koganei Proportional Control Valves KFPV300 Series Rc3/8, Rc1/2 Direct Acting 2-port Valve, Plunger Type first appeared on Kouei Japan Trading | Get Quotation.

Koganei Proportional Control Valves KFPV050 Series Rc1/4 Direct Acting 2-port Valve, Plunger Type

kvt part2 — Mon, 28 Dec 2020 16:23:47 +0000

Manufacturer: KOGANEI CORPORATION

Features

Use the proportional control valve together with the KFPC1 controller, and achieve more accurate and stable flow control. As a result, the system responds smoothly to control signals and maintains consistent performance. Moreover, this combined setup improves adjustability and repeatability, so operators can optimize process conditions with greater confidence and efficiency.

Specifications

Basic type	KFPV050
Media^{Note 1}	Air, neutral gas, water (other gases and liquids that do not affect component parts)
Seal material	FKM
Material for the body	Brass or stainless steel
Temperature range of media used	−10 to 90 °C [14 to 194 °F] (non-freezing)
Operation system	Direct drive type
Ambient temperature range (ambient atmosphere)	0 to 55 °C [32 to 131 °F]
Media viscosity	Less than 21 × 10⁻⁶
Mounting direction^{Note 2}	Any
Protection level	IP65 compliant

The post Koganei Proportional Control Valves KFPV050 Series Rc1/4 Direct Acting 2-port Valve, Plunger Type first appeared on Kouei Japan Trading | Get Quotation.

Koganei Small Proportional Control Valve KFPV010 Series

kvt part2 — Mon, 28 Dec 2020 16:15:48 +0000

Manufacturer: KOGANEI CORPORATION

Features

This design reduces overall device size and weight, and it helps create more compact and efficient systems. As a result, users gain easier installation and improved layout flexibility. Moreover, the device supports precise control at extremely low flow rates, which enables accurate handling of delicate processes.

In addition, the wide orifice diameter lineup increases application versatility. Users can choose from five options, including 0.4, 0.8, 1.2, 1.6, and 2.0 millimeters, so the system adapts easily to different flow requirements. Furthermore, the design achieves hysteresis of ten percent or less even without a controller, which improves stability and repeatability.

At the same time, the body material options include stainless steel and brass, so users can match the device to chemical and environmental conditions. Moreover, ISO 10993 compliant models are available for biological evaluation of medical devices when using stainless steel bodies. In addition, the product meets CE marking requirements, which supports global use. Finally, the device is compatible with liquid applications, making it suitable for a wide range of industrial and medical processes.

Specifications

Basic type	KFPV(A)010
Medium^{Note 1}	Air, neutral gas, water (other gases and liquids that do not affect component parts)
Seal material	FKM
Body material	Brass or stainless steel
Operating temperature range	0 to 55 °C [32 to 131 °F]
Operating method	Direct acting type
Medium viscosity	1 × 10⁻⁶ or less
Mounting direction^{Note 2}	Any
Protection level	IP40

The post Koganei Small Proportional Control Valve KFPV010 Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Pump For High-Viscosity Liquid Chemicals Dispensing

kvt part2 — Mon, 28 Dec 2020 15:46:51 +0000

Manufacturer: KOGANEI CORPORATION

Features

This design eliminates bubble blending caused by pressurization, and it ensures smoother and more stable liquid flow during operation. As a result, the process maintains higher accuracy and consistent dispensing quality. Moreover, the system significantly reduces the volume of liquid chemicals required during maintenance. Therefore, users lower chemical consumption, cut operating costs, and improve overall efficiency while maintaining reliable performance.

Specifications

Model	F-EPT10-16W	F-EPT10-18W
Dispensing volume	0.5–10 mL
Maximum dispensing pressure	0.3 MPa
Dispensing flow rate	0.1–2 mL/s
Suction flow rate	0.1–2 mL/s
Maximum viscosity of media	10000 cP
Repeatability of dispensing volume	±0.5% F.S.
Proof pressure	0.4 MPa
Mass	3.6 kg

The post Koganei Pump For High-Viscosity Liquid Chemicals Dispensing first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electric RT Pump F-EPR Series

kvt part2 — Mon, 28 Dec 2020 15:33:47 +0000

Manufacturer: KOGANEI CORPORATION

Features

In addition to low particle generation, strong solution replacement characteristics, and effective bubble removal, the tube diaphragm pump delivers faster response and superior flow rate stability beyond what conventional plastic pumps achieve. As a result, the system maintains smooth and predictable operation under a wide range of conditions. Moreover, the improved response supports precise control during dynamic processes, which enhances overall dispensing accuracy. Consequently, the pump enables constant dispensing and a stable flow rate even during microscopic discharge applications, ensuring reliable performance in high precision manufacturing environments.

Specifications

Model	F-EPR05-1W
Dispensing volume	0.1–5 mL
Maximum dispensing pressure	0.1 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Maximum dispensing flow rate	4 mL/s
Maximum suction flow rate	4 mL/s
Proof pressure	0.5 MPa

The post Koganei Electric RT Pump F-EPR Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electric CT/PT/HT Pump for FPD Processes F-EPT, F-EPP, F-EPH Series

kvt part2 — Mon, 28 Dec 2020 15:26:18 +0000

Manufacturer: KOGANEI CORPORATION

Features

The tube diaphragm structure delivers proven performance and high reliability, and it uses Koganei’s unique eight shaped cross section combined with a trefoil tube diaphragm. As a result, the design eliminates sliding portions in the liquid chemical dispensing area, so particle generation stays significantly lower than with syringe type pumps. Therefore, the system supports cleaner and more stable chemical dispensing.

Moreover, mounting an AC servo motor greatly improves flow rate control performance. In addition to high repeatability in dispensing volume, the pump now enables smooth liquid chemical dispensing without pulsation. Furthermore, the AC servo motor allows precise control of dispensing speed, so the system can synchronize with substrate movement and expand overall controllability.

At the same time, the pump capacity lineup supports a wide range of substrate sizes. Users can select from maximum dispensing volumes of 30, 60, 100, 200, or 300 milliliters according to application requirements. Consequently, this flexible lineup covers both small and large substrates while maintaining consistent performance a

Specifications

Model	F-EPT30	F-EPT60	F-EPT100	F-EPT200	F-EPT300
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Dispensing volume	3–30 mL	6–60 mL	10–100 mL	20–200 mL	30–300 mL
Maximum dispensing pressure	0.05 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Dispensing flow rate	0.05–10	0.05–15	0.05–25	0.1–25	0.1–60
Suction flow rate	0.05–10	0.05–15	0.05–25	0.1–25	0.1–60
Proof pressure	0.1 MPa			0.15 MPa
Mass	9.5 kg	14.2 kg	14.2 kg	28.6 kg	32 kg

Model	F-EPP200	F-EPP300	F-EPH200	F-EPH300
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Dispensing volume	20–200 mL	30–300 mL	20–200 mL	30–300 mL
Maximum dispensing pressure	0.05 MPa	0.07 MPa	0.1 MPa	0.1 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Dispensing flow rate	0.5–20	0.5–30	0.5–20	0.05–20
Suction flow rate	0.5–20	0.5–30	0.5–20	0.05–20
Proof pressure	0.1 MPa		0.15 MPa
Mass	27.4 kg	29.3 kg	27.5 kg	32 kg

The post Koganei Electric CT/PT/HT Pump for FPD Processes F-EPT, F-EPP, F-EPH Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electric PT Pump

kvt part2 — Mon, 28 Dec 2020 15:13:03 +0000

Manufacturer: KOGANEI CORPORATION

Features

This system employs a PT parallel tube diaphragm pump configuration, and it combines Koganei’s unique eight shaped cross section tube with bellows to deliver stable and precise pumping performance. As a result, the design eliminates sliding portions, so particle generation during pump operation becomes almost nonexistent. Moreover, this structure removes the need for syringe pump seal replacement and other periodic maintenance, which reduces downtime and operating costs.

In addition, the internal design minimizes liquid chemical residue, so it prevents photoresist gelling and supports cleaner processing. Furthermore, the sealed construction blocks outside air from entering the system, and this feature significantly reduces the risk of electrolyte crystallization. Therefore, the pump ensures long term stability, high cleanliness, and reliable performance in demanding chemical dispensing applications.

Specifications

Model	F-EPP05-7W	F-EPP10-2W	F-EPP50-3W
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Dispensing volume	0.1–5.0 mL	0.1–10.0 mL	2–50 mL
Maximum dispensing pressure	0.2 MPa		0.3 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Dispensing flow rate	0.1–4.0 mL/s		0.1–10.0 mL/s
Suction flow rate	0.1–4.0 mL/s		0.1–10.0 mL/s
Maximum viscosity of media	200 cP
Repeatability of dispensing volume	±0.1% F.S.		±0.5% F.S.
Proof pressure	0.3 MPa		0.4 MPa
Mass	2.5 kg	2.7 kg	6.4 kg

The post Koganei Electric PT Pump first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electric CT Pump

kvt part2 — Mon, 28 Dec 2020 15:05:35 +0000

Manufacturer: KOGANEI CORPORATION

Features

This design delivers a low particle structure by using an extremely smooth inner tube surface with a roughness of Rt 0.3 micrometers or less, and it applies high purity PFA material. As a result, the pump generates almost no particles during operation, and it reduces wet surface area to about one fifth compared with conventional bellows pumps. Therefore, the system supports clean and stable chemical dispensing in sensitive processes.

In addition, the pump provides excellent solution replacement characteristics. Because the pump chamber follows an ideal flow path and leaves almost no liquid residue, it consistently dispenses fresh solution. Consequently, process quality improves, and contamination risk decreases.

Moreover, the flow structure promotes effective bubble removal. Since liquid flows from the bottom upward, bubbles naturally move toward the discharge port. As a result, bubbles do not affect dispensing accuracy, and the pump maintains high precision output. Furthermore, during startup or solution filling, operators can easily remove air bubbles, which makes this system suitable even for liquids that tend to generate bubbles.

At the same time, the compact and high precision operation enhances installation flexibility. The unique OCT pump structure creates a compact appearance, which suits side by side installations. In addition, a five phase stepping motor and a precision feed screw deliver high resolution and excellent repeatability. An encoder also detects potential faults such as accidental step out, so reliability improves further.

Finally, the simple and highly reliable construction strengthens long term performance. By sealing liquid between coaxial bellows and a welded tube joint section, the structure prevents liquid leakage and blocks air penetration. Therefore, the pump maintains high precision with fewer sealing points, and it achieves higher reliability than conventional pumps that rely on multiple seals.

Specifications

Model	F-EPT06A1	F-EPT10A1
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Dispensing volume	0.5–6 mL	0.5–10 mL
Maximum dispensing pressure	0.15 MPa
Dispensing flow rate	0.1–4 mL/s
Suction flow rate	0.1–4 mL/s
Maximum viscosity of media	200 cP
Repeatability of dispensing volume	±0.1% F.S.
Proof pressure	0.2 MPa
Mass	3.1 kg	3.6 kg

The post Koganei Electric CT Pump first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electric Bellows Pump F-EPB Series

kvt part2 — Mon, 28 Dec 2020 14:47:32 +0000

Manufacturer: KOGANEI CORPORATION

Features

The liquid contact area uses Teflon, and this material supports safe handling of a wide range of liquid chemicals. As a result, the system maintains strong chemical resistance and consistent performance over extended operation. In addition, the bellows method removes any sliding portion, so particle generation during operation becomes almost nonexistent. Therefore, the process stays clean and suitable for high purity applications.

Moreover, the system allows simple and precise control of dispensing volume and dispensing speed. By operating a stepping motor, users achieve accurate digital control, which improves repeatability and process stability. Consequently, this design enhances efficiency, reduces adjustment time, and supports reliable dispensing in demanding production environments.

Specifications

Model	F-EPB08-4W	F-EPB15-3W	F-EPB40-1W
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Maximum dispensing volume	8 mL	15 mL	40 mL
Maximum dispensing pressure	0.2 MPa
Dispensing flow rate	0.1–4 mL/s		0.1–10 mL/s
Suction flow rate	0.1–4 mL/s		0.1–10 mL/s
Maximum viscosity of media	200 cP		100 cP
Repeatability of dispensing volume	±1% F.S.
Proof pressure	0.3 MPa
Mass	3.1 kg	3.1 kg	3.6 kg

The post Koganei Electric Bellows Pump F-EPB Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Constant Dispensing PT Pump Series F-EPP, F-APP Series

kvt part2 — Mon, 28 Dec 2020 14:32:21 +0000

Manufacturer: KOGANEI CORPORATION

Features

In addition, the internal structure minimizes liquid chemical residue, so it prevents gel formation of photoresist materials and supports cleaner processing. Furthermore, the sealed design blocks outside air from entering the system, and this feature significantly reduces the risk of electrolyte crystallization. Therefore, the pump ensures long term stability, high cleanliness, and reliable performance in demanding chemical applications.

Specifications

Model	F-EPP05-7W	F-EPP10-2W	F-EPP50-3W
Media	Photoresist solution, pure water, chemical solution (flammable substances not allowed)
Dispensing volume	0.1–5.0 mL	0.1–10.0 mL	2–50 mL
Maximum dispensing pressure	0.2 MPa		0.3 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Dispensing flow rate	0.1–4.0 mL/s		0.1–10.0 mL/s
Suction flow rate	0.1–4.0 mL/s		0.1–10.0 mL/s
Maximum viscosity of media	200 cP
Repeatability of dispensing volume	±0.1% F.S.		±0.5% F.S.
Proof pressure	0.3 MPa		0.4 MPa
Mass	2.5 kg	2.7 kg	6.4 kg

Model	F-APP10-5W
Media	Photoresist solution, pure water, chemical solution
Maximum dispensing volume	10 mL
Maximum dispensing pressure	0.15 MPa
Allowable maximum vacuum pressure	−0.02 MPa
Proof pressure	0.3 MPa
Mass	1.9 kg

The post Koganei Constant Dispensing PT Pump Series F-EPP, F-APP Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Pneumatic Bellows Pump F-APB Series

kvt part2 — Mon, 28 Dec 2020 14:20:12 +0000

Manufacturer: KOGANEI CORPORATION

Features

The liquid contact area uses Teflon, and this design supports reliable handling of a wide range of liquid chemicals. As a result, the system maintains strong chemical resistance and stable performance over long operating periods. In addition, the bellows method eliminates sliding portions, so particle generation becomes almost nonexistent. Therefore, the process stays clean and well suited for high-purity applications. Moreover, users can set the dispensing volume easily by using an adjustment nut, which allows quick and accurate tuning. At the same time, the system achieves low operating cost by using an air cylinder, and this approach improves efficiency while reducing overall maintenance effort.

Specifications

Model	F-APB08-6W	F-APB15-8W	F-APB40-7W	F-APB60-1W
Media	Photoresist solution, pure water, chemical solution
Maximum dispensing volume	8 mL	15 mL	40 mL	60 mL
Maximum dispensing pressure	0.05 MPa
Repeatability of dispensing volume	±1% F.S.
Proof pressure	0.15 MPa
Mass	1.3 kg	1.4 kg	2.8 kg	3.2 kg

The post Koganei Pneumatic Bellows Pump F-APB Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Speed Controller For Pilot Air Control TSC-60W

kvt part2 — Mon, 28 Dec 2020 14:12:19 +0000

Manufacturer: KOGANEI CORPORATION

Specifications

Item	Model	TSC-60W
Media		Air
Operating pressure range	MPa [kgf/cm²] [psi]	0～0.9 (0～9.2) [0～131]
Operating temperature range	°C [°F]	5～60 [41～140]
Cracking pressure	MPa [kgf/cm²] [psi]	0.05 (0.51) [7.3]
Description		Both directions adjustment speed controller Low flow rate type Special piping direction Black knob on one side

The post Koganei Speed Controller For Pilot Air Control TSC-60W first appeared on Kouei Japan Trading | Get Quotation.

Koganei Drain Valve Series Flange Type 2-Port F-AVE4000, 5000, 6000

kvt part2 — Mon, 28 Dec 2020 14:05:25 +0000

Manufacturer: KOGANEI CORPORATION

Features

This compact series lineup supports precise control of small chemical flows, and it now delivers even greater variety to meet diverse application needs. In addition, the expanded lineup increases flexibility, which allows users to select the most suitable configuration with ease. Moreover, the system supports a wide range of piping specifications and valve functions, so it adapts smoothly to different process requirements. Furthermore, the lineup includes advanced options such as automatic flow adjustment, which improves control accuracy and enhances overall process efficiency.

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]	Orifice mm	Port size
	Media	Atmosphere			Main	Operating port
F-AVE4000	5～40 [41～104]	5～40 [41～104]	0～0.02 (0～0.2) [0～2.9]	100	100A	Rc1/8
F-AVE5000				125	125A
F-AVE6000				150	150A

The post Koganei Drain Valve Series Flange Type 2-Port F-AVE4000, 5000, 6000 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Drain Valve Series Union Type 2-Port, 3-Port F-AVE100~4000

kvt part2 — Mon, 28 Dec 2020 13:55:20 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]	Orifice mm	Port size
Model	Media	Atmosphere	Operating pressure range MPa [kgf/cm²] [psi]	Orifice mm	Main	Operating port
F-AVE1000	5～40 [41～104]	5～40 [41～104]	0～0.02 (0～0.2) [0～2.9]	25	25A	Rc1/8
F-AVE1500				30	32A
F-AVE2000				40	40A
F-AVE2500				50	50A
F-AVE3000				65	65A
F-AVE4000				78	75A

The post Koganei Drain Valve Series Union Type 2-Port, 3-Port F-AVE100~4000 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Large Flow Series Check Valve F-C375, 500

kvt part2 — Mon, 28 Dec 2020 13:51:05 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]	Effective area mm² (Cv)
	Media	Atmosphere
F-C375	5～60 [41～140]	0～50 [32～122]	0.07～0.9 (0.7～9.2) [10.2～131]	74 (3.7)
F-C500			0.07～0.9 (0.7～9.2) [10.2～131]
Port size			Rc3/8	Rc1/2

The post Koganei Large Flow Series Check Valve F-C375, 500 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Large Flow Series Air Operated Valve F-AVP500, 750

kvt part2 — Mon, 28 Dec 2020 13:48:01 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]		Orifice mm (Cv)	Port size
	Media	Atmosphere	A→B	B→A		Main	Operating port
F-AVP500	5～60 [41～140]	0～50 [32～122]	0～0.5 (0～5.1) [0～73]	0～0.3 (0～3.1) [0～44]	12Nozzle (2.5)	Outer dia. 1/2″ tube	Rc1/8
F-AVP750	5～60 [41～140] 5～100 [41～212]^{Note 1}				20Nozzle (7.0)	Outer dia. 3/4″ tube

The post Koganei Large Flow Series Air Operated Valve F-AVP500, 750 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Large Flow Series Air Operated Valve F-AVB400~1000

kvt part2 — Mon, 28 Dec 2020 13:14:09 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model	Operating temperature range °C [°F]		Operating pressure range MPa [kgf/cm²] [psi]		Orifice mm (Cv)	Port size
	Media	Atmosphere	A→B	B→A		Main	Operating port
F-AVB400	5～60 [41～140]	0～50 [32～122]	0～0.44 (0～4.5) [0～65]	0～0.03 (0～0.3) [0～4.4]	10 (1.8)	Rc3/8
F-AVB500					12 (2.5)	Rc1/2
F-AVB600					16 (6.5)	Rc3/4
F-AVB750					20 (7.0)
F-AVB1000			0～0.2 (0～2.0) [0～29]	0～0.02 (0～0.2) [0～2.9]	25 (11.0)	Rc1

The post Koganei Large Flow Series Air Operated Valve F-AVB400~1000 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Suck Back Valve

kvt part2 — Mon, 28 Dec 2020 13:02:32 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model			F-SV070-200W
Media			Pure water, chemicals
Operating temp. range	°C [°F]	Media	5～60 [41～140]
Operating temp. range	°C [°F]	Atmosphere	0～50 [32～122]
Operating pressure range	MPa [kgf/cm²] [psi]		0～0.3 (0～3.1) [0～44]
Pilot pressure	MPa [kgf/cm²] [psi]		0.3～0.5 (3.1～5.1) [44～73]
Proof pressure	MPa [kgf/cm²] [psi]		1 (10.2) [145]
Maximum suck back volume	cm³ [in³]		0.045 [0.00275]
Connection port size		Pilot	M5 × 0.8
Connection port size		Main	Rc1/8
Recommended mounting direction			Vertical mounting with port facing upward

The post Koganei Suck Back Valve first appeared on Kouei Japan Trading | Get Quotation.

Koganei Air Operated Valve With Suck Back

kvt part2 — Mon, 28 Dec 2020 07:26:58 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model			F-SAV070-100W
Media			Pure water, chemicals
Operating temp. range	°C [°F]	Media	5～60 [41～140]
Operating temp. range	°C [°F]	Atmosphere	0～50 [32～122]
Operating pressure range	MPa [kgf/cm²] [psi]		0～0.2 (0～2.0) [0～29]
Pilot pressure	MPa [kgf/cm²] [psi]		0.3～0.5 (3.1～5.1) [44～73]
Back pressure	MPa [kgf/cm²] [psi]		0～0.2 (0～2.0) [0～29]
Proof pressure	MPa [kgf/cm²] [psi]		1 (10.2) [145]
Orifice (Cv)	mm		1.8 [0.06]
Pilot connection port size			M5 × 0.8
Leakage at valve seat	cm³/min [in³/min]		0 [0] (When the media is water)
Maximum suck back volume	cm³		0.04 [0.0024]
Recommended mounting direction			Vertical mounting with port facing upward^Note

The post Koganei Air Operated Valve With Suck Back first appeared on Kouei Japan Trading | Get Quotation.

Koganei 3-Port Valve

kvt part2 — Mon, 28 Dec 2020 07:22:42 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model			F-DAV070-200W
Media			Pure water, chemicals, air, N₂
Operating temp. range	°C [°F]	Media	5～60 [41～140]
Operating temp. range	°C [°F]	Atmosphere	0～50 [32～122]
Operating pressure range	MPa [kgf/cm²] [psi]	A → B	0～0.5 (0～5.1) [0～73]
Operating pressure range	MPa [kgf/cm²] [psi]	B → A	0～0.3 (0～3.1) [0～44]
Pilot pressure	MPa [kgf/cm²] [psi]		0.3～0.5 (3.1～5.1) [44～73]
Back pressure	MPa [kgf/cm²] [psi]		0～0.3 (0～3.1) [0～44]
Proof pressure	MPa [kgf/cm²] [psi]		1 (10.2) [145]
Orifice (Cv)	mm		2 [0.1]
Pilot connection port size			M5 × 0.8
Leakage at valve seat	cm³/min [in³/min]		0 [0] (When the media is water)
Operating frequency	c.p.m		30 or less
Mounting direction			Any

The post Koganei 3-Port Valve first appeared on Kouei Japan Trading | Get Quotation.

Koganei 2-Port Valve

kvt part2 — Mon, 28 Dec 2020 07:17:50 +0000

Manufacturer: KOGANEI CORPORATION

Features

Specifications

Model			F-AV030-100W
Media			Pure water, chemicals, air, N₂
Operating temp. range	°C [°F]	Media	5～60 [41～140]
Operating temp. range	°C [°F]	Atmosphere	0～50 [32～122]
Operating pressure range	MPa [kgf/cm²] [psi]	A → B	0～0.2 (0～2.0) [0～29]
Operating pressure range	MPa [kgf/cm²] [psi]	B → A	0～0.1 (0～1.0) [0～15]
Pilot pressure	MPa [kgf/cm²] [psi]		0.3～0.5 (3.1～5.1) [44～73]
Back pressure	MPa [kgf/cm²] [psi]		0～0.1 (0～1.0) [0～15]
Proof pressure	MPa [kgf/cm²] [psi]		1 (10.2) [145]
Orifice (Cv)	mm		1 [0.02]
Pilot connection port size			M5 × 0.8
Leakage at valve seat	cm³/min [in³/min]		0 [0] (When the media is water)
Operating frequency	c.p.m		30 or less
Mounting direction			Any

The post Koganei 2-Port Valve first appeared on Kouei Japan Trading | Get Quotation.

Koganei Micro 2-Port Valve

kvt part2 — Mon, 28 Dec 2020 07:11:05 +0000

Manufacturer: KOGANEI CORPORATION

Features

This compact and lightweight body supports precise control of small chemical flows, and it fits easily into limited installation spaces. In addition, the design features a 2 mm orifice and a 14 mm valve width, so it delivers stable and accurate flow control. Moreover, the unit uses Flowell 80 series fittings, which simplifies connection and improves compatibility with existing systems. At the same time, an operating frequency of up to 5 Hz allows responsive and consistent performance in dynamic processes. Furthermore, the structure prevents screw loosening by changing from metal screw fixing to pin fixing, and this design choice improves long-term reliability and reduces maintenance effort.

Specifications

Model			F-AVPN070
Media			Pure water, chemicals, air, N₂
Operating temp. range	°C	Media	5～80
Operating temp. range	°C	Atmosphere	0～60
Operating pressure range	MPa	A → B	0～0.5
Operating pressure range	MPa	B → A	0～0.3
Pilot pressure	MPa		0.3～0.5
Back pressure	MPa		0～0.3
Proof pressure	MPa		1
Orifice (Cv)	mm		-LLA, -LLB: 2 [0.06] -LLC: 2 [0.11]
Pilot connect port size			M5 × 0.8
Leakage at valve seat	cm³/min		0 (When the media is water)
Operation frequency^Note	c.p.m		300(5Hz) or less
Mounting direction			Any
Mass	g		22

The post Koganei Micro 2-Port Valve first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electrostatic Potential Sensor DTY-KVS11

kvt part2 — Mon, 28 Dec 2020 06:55:28 +0000

Manufacturer: KOGANEI CORPORATION

Features

The handy surface potential meter works as a portable digital display instrument, and it accurately measures the surface potential of charged objects without any contact. As a result, users can perform fast and reliable measurements while avoiding damage to sensitive surfaces. Moreover, the clear digital display improves readability, which supports quick decision making during inspections. In addition, the compact and lightweight design allows easy daily use in various environments. Therefore, this meter supports efficient, day-to-day static electricity management across production, maintenance, and quality control tasks.

Specifications

Model	DTY-KVS11
Measurement potential ranges	Normal mode: 0.00 to ±19.99 kV I.B mode: 0.000 to ±1.999 kV
Signal sensing method	Vibration chopper system
Display data refresh frequency	0.5 seconds
Measurement accuracy	±10% rdg, ±2 digit
Measurement distance	30 mm [1.18 in] (Space between item being measured and detector)
Measurement distance adjustment	Red LED light focusing system (Light mark focal distance: 30 mm [1.18 in])
Head rotation angle	180° (stops at each 45°, 5 positions)
Mode switching	Mode button switching
Battery check	Remaining level indicator on the display
Power	6P 9VD alkaline square battery
Storage temperature, humidity range	0 to 40°C, 20 to 70% RH (non-condensation)
Mass	160 g [5.64 oz]
Accessories	9V battery, soft case, grounding cable, strap

The post Koganei Electrostatic Potential Sensor DTY-KVS11 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Electrostatic Potential Sensor DTY-EPS01

kvt part2 — Mon, 28 Dec 2020 06:44:50 +0000

Manufacturer: KOGANEI CORPORATION

Features

This system enables precise electrostatic control directly on the production line, and it allows continuous monitoring of invisible static electricity without increasing manpower. As a result, operators maintain stable electrostatic conditions more efficiently. Moreover, constant monitoring supports electrostatic control even in measurement locations that are difficult to reach with handheld instruments, so overall process reliability improves.

In addition, the sensor offers two output types, which increases flexibility in system design. It provides an analog output for continuous monitoring, while it also supports a switch output that enables clear judgment signals. Therefore, users can easily choose the output type that best fits their control requirements.

Furthermore, the judgment output function enhances automation when the switch output type is used. Once the preset threshold is reached, the sensor immediately provides notification through an LED and a voltage comparison output. Consequently, operators receive fast and clear status feedback.

At the same time, the compact size supports space-saving installation. Compared to existing EP sensors, this model reduces volume by approximately 46 percent. In addition, the total installation space decreases because the unit can connect directly to external control devices without using an amplifier, which simplifies system layout.

Additionally, users can configure the electrostatic potential sensor through computer support software. By using RS485 communication, settings can be adjusted quickly and accurately. Moreover, the software allows users to acquire logs, which supports long-term monitoring and data analysis.

The sensor also provides three selectable operation modes, so it adapts easily to different applications. Users can choose the standard mode for general monitoring, the high voltage mode for elevated potential environments, or the ion balance monitor mode for balance verification. As a result, one device supports multiple operational needs.

Moreover, the system enables confirmation of ionizer performance through the ion balance measurement function. By mounting an optional monitor plate, users can easily check ion balance conditions. Therefore, maintenance and verification become faster and more reliable.

Finally, the zero calibration function switch improves measurement accuracy over time. Users can quickly adjust the measured value to zero volts, which ensures stable readings. Settings support a wide measurement range from minus 200 volts to plus 200 volts, and both input and communication adjustments can be completed directly on the product, making calibration simple and efficient.

Specifications

Model		Analog output type	Switch output type
Item		DTY-EPS01-EA	DTY-EPS01-ES
Voltage	[V]	24 VDC ±10%
Current	[mA]	max 50
Indicator light		Power LED (green): lit when power is on
		Indicator LED (blue) for settings mode: not lit in standard mode; lit in high voltage mode; flashes in ion balance mode
		Indicator LED (red) for abnormalities: lit when over range or sensor abnormality occurs
			Indicator LED (yellow) for switch: lit during switch output
Analog output^Note1		1 to 5 V analog output 1 (Zero-point 3 V, full scale 4 V) (Output impedance approximately 100 Ω)	–
Output		Alarm output 1 (NPN open collector output) (24 VDC ±10%/max 50 mA) (Internal voltage drop max 0.3 V @ 5 mA/max 1.0 V @ 50 mA)	Judgment output 2 Alarm output 1 (NPN open collector output) (24 VDC ±10%/max 50 mA) (Internal voltage drop max 0.3 V @ 5 mA/max 1.0 V @ 50 mA)
Input		Zero calibration input 1 (Shared 24 VDC output voltage power source, input current 4.8 mA @ 24 VDC, input impedance 4.7 kΩ) *Zero calibration is within ±200 V
Measurement distance	[mm in]	6 to 100 [0.236 to 3.9]
Measurement range	[mm in]	φ20 to φ400 [0.787 to 15.7]
Accuracy		±5% F.S.
Data output cycle	[ms]	10 Smoothing: 50, 100, 200, 500, 1000 (depending on the setting)
Settings mode		Ion balance mode/Standard mode/High voltage mode
Button settings		1 pc. (Measurement mode switch/Zero calibration)
Communication I/F		Set via RS485 communication
Temperature characteristics		+0.5% F.S./°C or under (0 to 40°C [0 to 104°F], standard of 25°C [77°F])
Usage environment		0 to 40°C [0 to 104°F], less than 65% (non-condensation, non-freezing)
Storage environment		−20 to 60°C [−68 to 140°F] (non-condensation, non-freezing)
Case material		Conductive ABS resin
External dimensions	mm [in]	55 (W) × 25 (H) × 10.5 (D) [2.165 (W) × 0.984 (H) × 0.413 (D)]
Weight	g [oz]	13 [0.459] (cable included)
Accessories		1 L shaped mounting bracket with mounting screws, 2 flat washers
		Attached according to order code
		1 power and signal cable (blank: none, -3L: 3 m cable, -10L: 10 m cable) 1 communication cable (blank: none, -1RLN: 1 m cable, -3RLN: 3 m cable, -10RLN: 10 m cable)

The post Koganei Electrostatic Potential Sensor DTY-EPS01 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Ion Wipe Dust Collection Unit

kvt part2 — Mon, 28 Dec 2020 06:37:53 +0000

Manufacturer: KOGANEI CORPORATION

Features

First, this design improves dust collection performance significantly, and it delivers approximately twice the efficiency of the DTY-WCM model. In addition, the system captures fine particles more effectively, which helps maintain a cleaner working environment. Moreover, the dust sensor mounts directly on the dust collection unit, so installation stays simple and efficient. Finally, users can select the sensor option by model, which ensures better compatibility and more precise dust monitoring across different applications.

Specifications

Model		DTY-ZMW01-□	DTY-ZMW01-□-DS
Consumption current	A	Max. 1.0 (when dust collection fan is running: Max. 2.0)
Dust collection fan exhaust flow rate	ℓ/min [ft³/min]	2000 [71]
Filter scavenging performance	%	62 [0.266]^{Note 1}
Dust sensor^{Note 2}		None	Available
Accessories		4 L brackets (with screws) provided
Usage environment		Indoor 0 to 40°C [32 to 104°F], 15 to 65% RH (with no condensation)
Weight	kg [lb]	1.3 [2.866] (with dust sensor)

The post Koganei Ion Wipe Dust Collection Unit first appeared on Kouei Japan Trading | Get Quotation.

Koganei Ion Wiper Blow Unit

kvt part2 — Mon, 28 Dec 2020 06:28:05 +0000

Manufacturer: KOGANEI CORPORATION

Features

This blow unit uses a high-frequency AC system with an ionizer blow type to deliver stable and balanced performance. As a result, it achieves excellent ion balance directly from the main unit. Moreover, the pulse blow function improves dust removal efficiency while reducing overall air consumption.

In addition, the unit includes one ion air nozzle to remove static charge. At the same time, two air blow nozzles effectively remove dust, and optional nozzle joints allow easy angle adjustment. Furthermore, a wide range of nozzle variations supports flexible installation for different applications.

To enhance detection capability, a photoelectric sensor can be connected to identify clear workpieces as an option. Likewise, connecting an electrostatic potential sensor enables precise control of the charge removal process. In addition, external input and output ports allow connection to an external controller for expanded system control. Finally, free support software is available, making parameter setting and operation adjustment simple and efficient.

Specifications

Model		DTY-WB01-□□
Input voltage	V	24 VDC ±5%
Consumption current	A	Max:0.6
Built-in ionizer		DTY-ELK01 (1 unit)
Built-in solenoid valve		230E1-SR-26W-24 VDC
Ion balance^{Note 1}	V	±15 (standard nozzle, set pressure 0.5 MPa [73 psi], 50 mm [1.969 in.] from tip of nozzle)
Static charge elimination time^{Note 1}	sec	1 (1000V→+100V, 0.5 MPa [73 psi], 50 mm [1.969 in.])
Medium		Air (clean air that contains no moisture or oil)
Operating pressure range	MPa [psi]	0.2 to 0.7 [29 to 102]
Ion air set pressure range	MPa [psi]	0.05 to 0.5 [7 to 73]
Port size		φ8 [0.315] Quick fitting
Air blowing time	sec	0.5 to 10, continuous (rotary switch, 16 points) (sensor off delay during continuous operation: 0.1 to 3.0 sec)
Intermittent blowing frequency^{Note 3}	Hz	1, 2, 3, 4, 6, 8, 10, continuous (non intermittent) (rotary switch, 10 points) Including 2 user settings areas
Switch		Power on/off Count ionizer discharge time, On: Enabled/Off: Disabled Count number of valve operations for blowing; On: Enabled/Off Disabled
Display		POWER: (green, power), ALM: (red, abnormal) MAINT: (yellow, maintenance), ION BLOW: (blue, blowing) EPS: (yellow, electrostatic potential sensor judging), DUST: (red/green/blue, state of dust sensor)
Nozzle (option)		Shower type: 60°, 90°, flat (3 types) Pinpoint type: φ2 [0.079], φ3 [0.118], φ4 [0.157] (3 types)
Consumed air flow^{Note 2}	ℓ/min	Ion air side: 170 (ANR) [6.0 (SCFM)], air blowing side: 330 (ANR) [11.7 (SCFM)]
Communication		RS485 communication
Number of communication connections	Units	15
Usage environment		Indoor 0 to 40°C [32 to 104°F], 15 to 65% RH (with no condensation)
Accessories		4 L brackets (with screws) provided, owner’s manual
Weight	kg [lb]	2.1 [4.630] (excluding nozzles/photoelectric sensor/power source)

The post Koganei Ion Wiper Blow Unit first appeared on Kouei Japan Trading | Get Quotation.

Koganei Unit Type A3 Size

kvt part2 — Mon, 28 Dec 2020 06:13:07 +0000

Manufacturer: KOGANEI CORPORATION

Features

Enhanced Performance and versatile Design

The current product line offers improved charge removal performance while maintaining a significantly smaller configuration. Because manufacturers prioritized application flexibility, they provide a small flow rate type nozzle and a silicon discharge needle as available options. Furthermore, the system accommodates various industrial scales by offering widths ranging from 350 to 3100 mm (13.78 to 122.05 inches).

Regarding specialized equipment, the ION WIPER actively prevents defects before they occur by neutralizing electrical charges and removing dust from LCDs, molded plastics, and electronic components. This specific model integrates charge removal, dust removal, and a dust collection box into a single, innovative design. Consequently, this small box configuration improves workspace economy, work efficiency, and overall productivity.

Lightweight Portability and Ergonomics

Engineers emphasized user comfort by designing these products with lightweight bodies specifically shaped for easy holding. These advancements lead to significant weight reductions across the lineup:

The standard product features a 200g body, representing a 20% weight reduction compared to previous company models.
The DTY-ELG31 model utilizes a 140g (4.94 oz) body, achieving a 30% reduction in weight.
The DTY-ELG41 model offers a 185g (6.53 oz) body, which provides a 10% weight reduction.

Advanced Operational Technology

In addition to ergonomic improvements, the devices utilize a high-frequency AC method to provide high efficiency in electrostatic charge removal and ensure an outstanding ion balance. Furthermore, users do not require a separate controller because the engineers built the valve and ion generator directly into the unit. To maintain reliability during constant movement, the hardware employs a highly flexible, flex-resistant robot cable for all primary connections.

Finally, the system supports enhanced maintenance functions through specialized air blowing:

By installing an optional pulse blow unit (sold separately), the operator can utilize pulsed air to improve both energy saving and dust removal efficiency.
In -PAU configurations, the system allows the pulse blow frequency to be variable within the range of 5 to 15Hz.
Moreover, both the IN port and the pulse blow unit are detachable, which ensures that optional parts remain easily replaceable.

Specifications

Model		DTY-WC-L	DTY-WCM-L
Blower fan		None	Built in
Power supply		100 VAC ±10% (50/60 Hz)
Consumption current	mA	Approx. 600	Approx. 650
Built-in ionizer		DTRY-ELL01 (2 units)
Ion balance^Note	V	±15
Media		Air
Decay time^Note		1sec(1000V→+100V, 0.5 Mpa [73 psi], 50 mm [1.969 in])
Operating pressure range	MPa [psi]	0.2 to 0.7 [29 to 102]
Ionizer set pressure range	MPa [psi]	0.05 to 0.5 [7 to 73]
Port size	mm [in]	φ8 [0.315] Quick fitting
Ionizer operating time (switch)		1s, 2s, continuous
External output	ERROR (emergency stop)	No-voltage a contact (24 VDC, 2 A max)
	ION END (ionizer operation ended)	No-voltage a contact (24 VDC, 2 A max)
	VAC START (external device operation)	No-voltage a contact (24 VDC, 2 A max)
Mass	kg [lb]	13.9 [30.644]	14.5 [31.967]
Other		Ionizer error stop function (with reset button)

The post Koganei Unit Type A3 Size first appeared on Kouei Japan Trading | Get Quotation.

Koganei Unit Type A4 Size

kvt part2 — Sat, 26 Dec 2020 06:37:03 +0000

Manufacturer: KOGANEI CORPORATION

Features

Enhanced Performance and versatile Design

Lightweight Portability and Ergonomics

Engineers emphasized user comfort by designing these products with lightweight bodies specifically shaped for easy holding. These advancements lead to significant weight reductions across the lineup:

The standard product features a 200g body, representing a 20% weight reduction compared to previous company models.
The DTY-ELG31 model utilizes a 140g (4.94 oz) body, achieving a 30% reduction in weight.
The DTY-ELG41 model offers a 185g (6.53 oz) body, which provides a 10% weight reduction.

Advanced Operational Technology

Finally, the system supports enhanced maintenance functions through specialized air blowing:

By installing an optional pulse blow unit (sold separately), the operator can utilize pulsed air to improve both energy saving and dust removal efficiency.
In -PAU configurations, the system allows the pulse blow frequency to be variable within the range of 5 to 15Hz.
Moreover, both the IN port and the pulse blow unit are detachable, which ensures that optional parts remain easily replaceable.

Specifications

Model		DTY-WC-S	DTY-WCM-S
Blower fan		None	Built in
Power supply		100 VAC ±10% (50/60 Hz)
Consumption current mA		Approx. 650	Approx. 700
Built-in ionizer		DTRY-ELL01 (1 unit)
Ion balance^Note V		±15
Media		Air
Decay time^Note		1sec(1000V → 100V, 0.5 MPa [73 psi], 50 mm [1.969 in])
Operating pressure range MPa [psi]		0.2 to 0.7 [29 to 102]
Ionizer set pressure range MPa [psi]		0.05 to 0.5 [7 to 73]
Port size mm [in]		φ8 [0.315] Quick fitting
Ionizer operating time (switch)		1s, 2s, continuous
External output	ERROR (emergency stop)	No-voltage a contact (24 VDC, 2 A max)
	ION END (ionizer operation ended)	No-voltage a contact (24 VDC, 2 A max)
	VAC START (external device operation)	No-voltage a contact (24 VDC, 2 A max)
Mass kg [lb]		6.7 [14.771]	7.3 [16.094]
Other		Ionizer error stop function (with reset button)

The post Koganei Unit Type A4 Size first appeared on Kouei Japan Trading | Get Quotation.

Koganei Air Gun Type DTY-ELG41

kvt part2 — Sat, 26 Dec 2020 06:26:13 +0000

Manufacturer: KOGANEI CORPORATION

Features

Performance and Physical Specifications

The product line delivers improved charge removal performance within a significantly smaller configuration than previous models. Because manufacturers prioritized versatility, they offer a small flow rate type nozzle and a silicon discharge needle to meet specific application needs. Furthermore, the equipment accommodates diverse workspace requirements since it is available in widths ranging from 350 to 3100 mm (13.78 to 122.05 inches).

Lightweight Design and Ergonomics

Engineers emphasized portability by designing several models for easy holding. These advancements result in the following weight specifications:

The standard product features a 200g lightweight body, representing a 20% reduction in weight compared to previous company offerings.
The DTY-ELG31 model utilizes an even lighter 140g (4.94 oz) body, which achieves a 30% reduction in weight.
The DTY-ELG41 model provides a 185g (6.53 oz) body, offering a 10% weight reduction.

Operational Efficiency and Integration

Beyond physical design, the units incorporate advanced technology to maximize functional efficiency.

By utilizing a high-frequency AC method, the system provides high efficiency in electrostatic charge removal and maintains an outstanding ion balance.
Because the units feature a built-in valve and ion generator, operators do not require a separate controller.
To ensure durability during movement, the hardware employs a highly flexible, flex-resistant robot cable for all primary connections.

Enhanced Cleaning Capabilities

For environments requiring superior dust maintenance, these products support specialized air-blowing functions.

By installing an optional pulse blow unit (sold separately), the operator can utilize pulsed air to improve both energy saving and dust removal efficiency.
In the -PAU configuration, the system allows the pulse blow frequency to be variable in the range of 5 to 15Hz.
Finally, the IN port and the pulse blow unit remain detachable, allowing users to easily replace optional components as needed.

Specifications

Model Item		DTY-ELG41-□
Input voltage V		DC24±5%
Current consumption mA		100 or less
Output voltage kV		Approx. 2.5 (high frequency type)
Display	Power/discharge	Power ON: Indicator LED (green) flashing Discharge: Indicator LED (green) ON
Display	Alarm	Alarm indicator LED (red) ON
Lighting LED		White LED
Lighting LED switch		Normally OFF/Normally ON/Lever sync
Outer dimensions mm [in.]		For gun shape: 177.3(L)×32(W)×127.9(H) [6.980(L)×1.260(W)×5.035(H)] For straight shape: 222.2(L)×32(W)×50(H) [8.748(L)×1.260(W)×1.969(H)] (not including protrusions)
Mass g [oz]		DTY-ELG41: 185 [6.53] DTY-ELG41-PAU: 235 [8.29] (without cables)
Ion balance^*1 V		±15
Pulse frequency^*2 Hz		5 to 15
Ozone generation amount^*3 ppm		0.04 or less
Medium^*4		Air (clean air, water vapor and oil removed)
Operating air pressure range MPa [psi]		DTY-ELG41: 0.05 to 0.6 [7 to 87] DTY-ELG41-PAU: 0.2 to 0.6 [29 to 87]
Operating Environment		Indoors: 0 to 40°C [0 to 104°F]/65% or less (non-condensation)
Material		Body: PBT, Nozzle: PPS
Accessories		AC Adapter, Instruction Manual

The post Koganei Air Gun Type DTY-ELG41 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Air Gun Type DTY-ELG31

kvt part2 — Fri, 25 Dec 2020 17:29:42 +0000

Manufacturer: KOGANEI CORPORATION

Features

Physical Design and Portability

Manufacturers have significantly refined the physical design of these units to enhance user ergonomics and installation flexibility. For instance, one product features a 200g lightweight body that is specifically shaped for easy holding. This design represents a 20% reduction in weight compared to previous models. Similarly, the DTY-ELG31 model offers an even more compact profile with a 140g (4.94oz) body, achieving a 30% reduction in weight. Beyond handheld portability, the equipment supports large-scale industrial setups as it is available in widths ranging from 350 to 3100 mm (13.78 to 122.05 inches).

Operational Efficiency and Technology

In addition to the physical improvements, the systems incorporate advanced technology to maximize performance.

Because the units utilize a high-frequency AC method, they provide high efficiency in electrostatic charge removal and maintain an outstanding ion balance.
Furthermore, users do not require a separate controller because the engineers built the valve and ion generator directly into the unit.
To ensure durability during movement, the hardware employs a highly flexible, flex-resistant robot cable for all primary connections.
While the standard configuration is powerful, the system offers improved charge removal performance within a smaller configuration than earlier types.
Additionally, specialized components like a small flow rate type nozzle and a silicon discharge needle are available to meet specific application needs.

Enhanced Cleaning Capabilities

For environments requiring superior maintenance, these products support specialized air-blowing functions. Specifically, by installing an optional pulse blow unit, operators can utilize pulsed air to improve both energy saving and dust removal efficiency. In the -PAU configuration, the pulse blow frequency is fully variable in the range of 5 to 15Hz. Finally, because the IN port and the pulse blow unit are detachable, users can easily replace or upgrade these optional components as needed.

Specifications

Model Item		DTY-ELG31-□
Input voltage V		DC24±5%
Current consumption mA		100 or less
Output voltage kV		Approx. 2.5 (high frequency type)
Display	Power/discharge	Power ON: Indicator LED (green) flashing Discharge: Indicator LED (green) ON
Display	Alarm	Alarm indicator LED (red) ON
Lighting LED		White LED
Lighting LED switch		Normally OFF/Normally ON/Lever sync
Outer dimensions mm [in.]		101.1(L)×32(W)×118.9(H)[3.980(L)×1.260(W)×4.681(H)] (not including protrusions)
Mass g [oz]		DTY-ELG31: 140 [4.94] DTY-ELG31-PAU: 190 [6.70] (without cables)
Ion balance^*1 V		±15
Pulse frequency^*2 Hz		5 to 15
Ozone generation amount^*3 ppm		0.04 or less
Medium^*4		Air (clean air, water vapor and oil removed)
Operating air pressure range MPa [psi]		DTY-ELG31: 0.05 to 0.6 [7 to 87] DTY-ELG31-PAU: 0.2 to 0.6 [29 to 87]
Operating Environment		Indoors: 0 to 40°C [0 to 104°F]/65% or less (non-condensation)
Material		Body: PBT, Nozzle: PPS
Accessories		AC Adapter, Instruction Manual

The post Koganei Air Gun Type DTY-ELG31 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Air Gun Type DTY-ELG21

kvt part2 — Fri, 25 Dec 2020 17:20:54 +0000

Manufacturer: KOGANEI CORPORATION

Features

Performance and Physical Configurations

This advanced equipment achieves improved charge removal performance while utilizing a significantly smaller configuration than previous iterations. Because manufacturers prioritized versatility, the system offers a small flow rate type nozzle and a silicon discharge needle to suit specific industrial needs. Furthermore, the unit accommodates diverse workspaces because it is available in widths ranging from 350 to 3100 mm (13.78 to 122.05 inches).

Design and Operational Efficiency

In addition to its adaptable size, the product features a 200g lightweight body that designers specifically shaped for easy holding. This ergonomic design represents a 20% reduction in weight compared to previous company products. Operationally, the device utilizes a high-frequency AC method to provide high efficiency in electrostatic charge removal and ensure an outstanding ion balance.

To further enhance durability and movement, the system employs a highly flexible robot cable for all connections. Moreover, users do not require a separate controller because the unit features a built-in valve and ion generator. Finally, by installing an optional pulse blow unit (sold separately), the operator can utilize pulsed air to improve both energy saving and dust removal efficiency.

Specifications

Model Item		DTY-ELG21
Input voltage V		DC24 ± 5%
Consumption current mA		Approx. 100
Output voltage kV		Approx. 2.5 (high frequency type)
Display	Power	Power indicator LED (green)
Display	Alarm	Alarm indicator LED (red)
Outer dimensions mm		164.6 (L) × 25 (W) × 135.8 (H) (not including protrusions)
Mass g		200 (without cables)
Ion balance *1 V		± 15
Ozone generation amount *2 ppm		0.04 or less
Medium *3		Air (clean air, water vapor and oil removed)
Operating air pressure range MPa		0.05 ~ 0.6
Operating Environment		Indoors: 0 to 40°C / 65% or less (non-condensation)
Material		Body: PBT, Nozzle: PPS
Accessories		AC Adapter, Instruction Manual

The post Koganei Air Gun Type DTY-ELG21 first appeared on Kouei Japan Trading | Get Quotation.

Koganei Bar Type BA11 Series

kvt part2 — Fri, 25 Dec 2020 17:12:04 +0000

Manufacturer: KOGANEI CORPORATION

Features

This advanced unit delivers improved charge removal performance while maintaining a significantly smaller configuration than previous models. Because engineers designed this system for versatility, a small flow rate type nozzle and a silicon discharge needle are readily available for specific applications. Furthermore, these components allow the device to operate efficiently in sensitive environments.

Regarding its physical dimensions, the unit accommodates a wide variety of installation sites because the available width ranges from 350 to 3100 mm. This measurement translates to an expansive reach of 13.78 to 122.05 inches, ensuring coverage for large-scale industrial surfaces.

Specifications

Item \ Model		DTY-BA11 -350	DTY-BA11 -600	DTY-BA11 -850	DTY-BA11 -1100	DTY-BA11 -1350	DTY-BA11 -1600	DTY-BA11 -1850	DTY-BA11 -2100	DTY-BA11 -2350	DTY-BA11 -2600	DTY-BA11 -2850	DTY-BA11 -3100
Power supply		24VDC ±5%
Consumption current mA		150
Output voltage kV		±10
LED indicators	POWER (green)	Lights while power is on
	RUN (green)	Lights during normal operation.
	ALARM (red)	Lights (RUN LED unlit) for discharge abnormality or circuitry abnormality (overcurrent)
	CLEANING (yellow)	Lights when cleaning timer’s time setting is reached.
Power Safety Circuit		Contact output when ALARM LED lights (normally closed 24VDC 50 mA MAX)
Cleaning timer time setting^{Note 1}		Setting within 100 to 10,000 hours supported (9 steps)
Ion balance V		Within ±30 (Measurement distance: 300 mm [11.81 in], Air supply pressure: 0.3 MPa [44 psi])
Static charge removal time Seconds		Within ±0.7 (Measurement distance: 300 mm [11.81 in], Air supply pressure: 0.3 MPa [44 psi])
Ozone generation amount ppm		Up to ±0.002 (Measurement distance: 50 mm [1.97 in], Air supply pressure: 0.2 MPa [29 psi])
Unit installation distance mm [in]		50 [1.97] or over
Medium		Air (Clean air, water vapor and oil removed)
Operating air pressure range MPa [psi]		0.01 to 0.5 [1.5 ~ 73]
Expended air flow rate^{Note 2} ℓ/min [ft³/min] (ANR)	Standard flow rate type	95 [3.35]	180 [6.35]	255 [9.00]	325 [11.47]	365 [12.88]	395 [13.94]	625 [22.06]	690 [24.36]	750 [26.48]	810 [28.59]	850 [30.01]	885 [31.24]
Expended air flow rate^{Note 2} ℓ/min [ft³/min] (ANR)	Small flow rate type (-A)	55 [1.94]	95 [3.35]	145 [5.12]	190 [6.71]	235 [8.30]	275 [9.71]	375 [13.24]	425 [15.00]	475 [16.77]	515 [18.18]	560 [19.77]	600 [21.18]
Weight^{Note 3} g [oz]		450 [15.87]	650 [22.93]	860 [30.34]	1060 [37.39]	1260 [44.44]	1470 [51.85]	1670 [58.91]	1880 [66.31]	2080 [73.37]	2290 [80.78]	2500 [88.18]	2710 [95.59]
Number of discharge needle nozzles (Pitch: 50 mm [1.969 in])		5	10	15	20	25	30	35	40	45	50	55	60
Operating environment		Indoors, 0 to 40°C [32 ~ 104°F], 15 to 85% RH (non-condensation)
Accessories		Power and signal cable (3 m [9.84 ft]), two mounting brackets, intermediate brackets (provided quantity in accordance with table below), discharge needle nozzle attachment/detachment tools
Number of provided intermediate brackets		—	—	—	1	1	2	2	3	3	4	4	4

The post Koganei Bar Type BA11 Series first appeared on Kouei Japan Trading | Get Quotation.

Koganei Bar Type BX01 High-Speed Charge Removal

kvt part2 — Fri, 25 Dec 2020 16:58:09 +0000

Manufacturer: KOGANEI CORPORATION

Features

Performance and Advanced Ionization

Optimal Balance Systems: To begin with, the high-frequency AC method provides a stable ion balance typically within $\pm$ 10V.
High-Performance Formats: Furthermore, a newly developed AC (200 Hz) format exhibits stable, long-term performance for eliminating static charges.
Model Specific Balance: Specifically, the DTY-ELF14H model produces an excellent ion balance of $\pm$ 5V, whereas the DTY-ELF13H maintains $\pm$ 10V.
Safe Emission Levels: Consequently, the hardware maintains extremely low ozone production levels at less than 0.004 ppm.

Application Versatility and Design

Adaptable Configurations: Additionally, the series offers a wide array of nozzle types that enable charge removal ranging from pinpoint targets to wide area workpieces.
No-Air Requirements: Therefore, several models require no air supply, which allows for flexible installation based on the location.
Advanced Ion Delivery: Moreover, specialized blow type models facilitate pinpoint charge removal and ion transport via tubing and metal piping.
Compact All-in-One Solutions: Similarly, the all-in-one unit ionizer features a compact body measuring just $25\text{ mm} \times 35\text{ mm}$ and does not require high-voltage wiring.
Resource Optimization: Finally, the air-saving type sucks in outside air for blowing to reduce overall air consumption during the elimination process.

Environmental Integration and Safety

Cleanroom Optimization: To support sensitive environments, specialized needles made of special alloys dramatically reduce dust generation.
Quiet Operation: Specifically, the built-in cross-flow fan operates at a low noise level of 48dB (A) or less.
Integrated Safety Monitoring: Furthermore, the alarm output function detects problems with static discharge, high-voltage circuits, or internal fans.
Electrical Protection: Likewise, the system ensures safety by detecting abnormal electrical discharges and overcurrents.
Certified Standards: As a result, the hardware remains CE marking compliant to meet industrial safety requirements.

Maintenance and User Interface

One-Touch Upkeep: Because of the specialized design, users can remove or attach the discharge needle unit and louvers with one touch and without any tools.
Automated Functions: In addition, an automatic cleaning function eliminates the need for manual maintenance of the discharge needle on certain models.
Precise Airflow Adjustment: Therefore, a flow rate adjusting knob enables you to obtain the required air flow rate for your specific task.
Visual Status Updates: Similarly, integrated balance indicators and LED lamps allow users to confirm the ratio of positive and negative ions at a glance.

Specifications

Item \ Model		DTY-BX01 main unit External potential sensor type
Item \ Model		DTY-BX01-200-(L)	DTY-BX01-400-(L)	DTY-BX01-200-F	DTY-BX01-400-F
Input voltage		24 VDC ±5%
Consumption current mA		110	170	240	410
Output voltage kV		±2 (during high frequency operation)
Indicator lamp (LED)	①POWER	(Power display LED: Green)
	②H.V	(Discharge display LED: Blue)
	③CHECK	(Static charge removal display and cleaning timer display LED: Yellow)
	④ALARM	(Alarm display LED: Red)
Safety circuit		An error is output and the LED on the main unit lights when there is a circuit error or abnormal output.
Input/output	Power supply signal connector (7P)	①24 VDC
		②0 V
		③F.G.
		④Check output (Open collector output; 50 mA max at 24 VDC, internal voltage drop 0.3 V max at 5 mA)
		⑤Alarm output (Open collector output; 50 mA max at 24 VDC, internal voltage drop 0.3 V max at 5 mA)
		⑥Signal output (Open collector output; 50 mA max at 24 VDC, internal voltage drop 0.3 V max at 5 mA)
		⑦Discharge stop (H.V off) input (Discharge stop by 0 V; at short circuit, no voltage input, internal drop voltage of 0.5 V or less, input current 5 mA at 24 VDC)
	External potential sensor connectors	2 ch
	Communication interface	RS232C
Integrated sensor		None
Low particle specifications^{Note 1}		Available		None
Ionizer installation distance mm [in]		50 [1.97] or over
Static charge removal mode		Ion polarity control static charge removal mode, pulse static charge removal mode, high-frequency static charge removal mode
Ion balance V		Within ±30 (150 mm [5.91 in] from center of main unit, at 0.1 MPa [15 psi] supply air pressure, during high frequency operation)		Within ±30 (150 mm [5.91 in] from center of main unit, during high frequency operation)
Ozone concentration ppm		0.04 or less (300 mm [11.81 in] from center of main unit, at 0.25 MPa [36 psi] supply air pressure)		0.04 or less (300 mm [11.81 in] from center of main unit)
Particle generation amount^{Note 1, Note 2} Particles		50 or less		—
Medium		Air (Clean air, water vapor and oil removed)		—
Operating air pressure range MPa [psi]		0.05 to 0.5 [7 to 73]		—
Expended air flow rate ℓ/min [ft³/min] (ANR)		60 [2.12] (when 0.5 MPa [73 psi] is applied)	100 [3.53] (when 0.5 MPa [73 psi] is applied)	—
Fan air volume m³/min [ft³/min]		—		0.09 [3.2] (per fan)
Number of fans installed Fan		—		4	8
Weight^{Note 3} g [oz]		153 [5.40]	275 [9.70]	229 [8.08]	430 [15.17]
Operating environment		0 to 40°C [32 to 104°F] / 65% or less (Non-condensation)
Accessories		User manual, brackets (1 set), power signal cable		User manual, brackets (1 set), power signal cable, filter for fan (installed)

The post Koganei Bar Type BX01 High-Speed Charge Removal first appeared on Kouei Japan Trading | Get Quotation.

Koganei Fan Type HA Series Over Head Type

kvt part2 — Fri, 25 Dec 2020 16:51:55 +0000

Manufacturer: KOGANEI CORPORATION

Features

High-Performance Ionization Technology

Advanced AC Systems: To begin with, the high-performance 200 Hz AC system enables an outstanding ion balance for stable operations.
Precision Output: Specifically, the DTY-ELF14H model produces an excellent ion balance of $\pm$ 5V, while the DTY-ELF13H maintains $\pm$ 10V.
Long-Term Stability: Consequently, this newly developed format ensures steady and long-term elimination of static electricity.
Environmental Safety: Furthermore, the hardware maintains extremely low ozone production at less than 0.004 ppm to ensure user safety.

Application Versatility and Efficiency

Diverse Nozzle Options: Additionally, a wide array of nozzle types enables charge removal tasks ranging from pinpoint targets to wide area workpieces.
Remote Ion Transport: Therefore, the blow type models facilitate never-before-possible ion transport using specialized tubing and metal piping.
Resource Management: In a similar fashion, the air-saving type sucks in outside air for blowing to optimize consumption.
No-Air Flexibility: Moreover, several models do not require an air supply at all, which allows for flexible installation based on the specific location.

Maintenance and Monitoring

Simplified Servicing: To facilitate easier upkeep, the design features a one-touch connection and disconnection mechanism for the needle unit.
Tool-Free Access: Specifically, users can remove and attach the discharge needle unit and louvers with one touch without using any tools.
Automated Care: Furthermore, certain high-end models include an automatic cleaning function so that manual maintenance of the discharge needle is not needed.
Visual Verification: Similarly, the hardware includes a balance indicator so users can confirm the ratio of positive and negative ions at a glance.

Safety and Diagnostics

Active Protection: To ensure ongoing safety, an alarm output function detects problems with static discharge, high-voltage circuits, or internal fans.
Abnormality Detection: Likewise, the system provides an abnormal ion balance output function to alert operators of performance shifts.
Global Compliance: Finally, the entire equipment range remains CE marking compliant to meet essential industrial safety standards.

Specifications

Item \ Model		DTY-HA01
Input voltage		100 to 240 VAC 50/60 Hz
Power consumption VA		42
Output voltage kV		±7.5
Indicator LED	POWER (green)	Lit when power is on
Indicator LED	H.V. ALARM (red)	Lit when there is a high voltage abnormality
Ion balance^{Note 1} V		±10
Static charge elimination time^{Note 1} sec.		4.0 or less
Amount of ozone generated^{Note 2} ppm		0.005 or less
Fan power	Maximum airflow m³/min [ft³/min]	4.0 × 3 fan [141.240 × 3 fan]
Fan power	Control	Smooth control with air flow rate adjusting knob
External dimensions^{Note 3} mm [in]		1020 [40] (W) × 60.5 [2.382] (H) × 150 [5.9] (D)
Weight kg [lb]		5.0 [11.023]
Usage environment		Indoor 0 to 40°C [0 to 104°F], 15 to 85% RH (with no condensation)
Accessories		Installation manual, AC cable, cleaning brush for discharge needle

The post Koganei Fan Type HA Series Over Head Type first appeared on Kouei Japan Trading | Get Quotation.

Koganei Fan Type FA Series Wide Area Type

kvt part2 — Fri, 25 Dec 2020 16:35:19 +0000

Manufacturer: KOGANEI CORPORATION

Features

Advanced Ionization and Performance

High-Frequency Technology: To begin with, the high-performance AC ( $200\text{ Hz}$ ) system enables an outstanding ion balance for stable operations.
Precise Balance Control: Specifically, the DTY-ELF14H model produces an excellent ion balance of $\pm5\text{V}$ , while the DTY-ELF13H maintains $\pm10\text{V}$ .
Long-Term Reliability: Consequently, this newly developed format ensures steady and long-term performance in eliminating static charges.
Safety Standards: Furthermore, the hardware maintains extremely low ozone production at less than $0.004\text{ ppm}$ and carries full CE marking compliance.

Versatility and Air Efficiency

Nozzle and Application Variety: Additionally, a wide array of nozzle types enables charge removal ranging from pinpoint targets to wide area workpieces.
Innovative Ion Transport: Therefore, the blow type models facilitate never-before-possible ion transport using specialized tubing and metal piping.
Resource Optimization: In a similar fashion, the air-saving type sucks in outside air for blowing to reduce overall air consumption.
Standalone Flexibility: Moreover, several models do not require an air supply at all, which allows for flexible installation based on the specific location.

Maintenance and Monitoring

Cleanroom Engineering: To support sensitive environments, specialized models utilize charge removal needles made of special alloys to dramatically reduce dust generation.
Simplified Servicing: Similarly, the design facilitates simple connection and disconnection of the discharge needle unit with one touch and without any tools.
Automated Maintenance: Furthermore, certain models feature an automatic cleaning function so that manual maintenance of the needle is not required.
Adjustable Output: Likewise, the airflow volume control allows operators to adjust the discharge smoothly via an integrated 5-level indicator.
Active Diagnostics: Finally, the system includes an alarm output function to detect problems with static discharge, high-voltage circuits, or internal fans.

Specifications

Item \ Model		DTY-FA01	DTY-FA02
Input voltage		24 VDC ±5%
Consumption current A		1.0	1.25
Output voltage kV		±7.5
Indicator LED	POWER (green)	Lit when power is on
	RUN (green)	Lit when high voltages are applied to electrodes
	FAN SPEED (green)	Displayed as 5 levels of fan airflow
	P.D. (red)	Lit when there is an electrical discharge abnormality (RUN LED turns off)
	O.C. (red)	Lit when there is an overcurrent in the high voltage circuit (RUN LED turns off)
	FAN LOCK (red)	Lit when there is a fan abnormality	—
Output		Contact output when red LED is lit (contact b, max. of 24 VDC, 50 mA)
Ion balance^{Note 1} V		±5
Static charge elimination time^{Note 1} sec.		1.0 or less	1.5 or less
Amount of ozone generated^{Note 2} ppm		0.006 or less
Fan power	Maximum airflow m³/min [ft³/min]	3.2 × 2 fan [112.992 × 2 fan]	3.2 × 3 fan [112.992 × 3 fan]
Fan power	Control	Smooth control with airflow volume adjustment
External dimensions^{Note 3} mm [in]		370 [14.6] (W) × 159 [6.3] (H) × 78.5 [3.091] (D)	566 [22.3] (W) × 146 [5.7] (H) × 69.5 [2.736] (D)
Weight^{Note 4} kg [lb]		1.7 [3.748]	3.1 [6.834]
Usage environment		Indoor 0 to 40°C [0 to 104°F], 15 to 85% RH (with no condensation)
Accessories		Installation manual, AC adaptor, output signal lead wires (set of 2), cleaning brush for discharge needle, 1 bracket set (DTY-FA01 mounted on unit, DTY-FA02 included)

The post Koganei Fan Type FA Series Wide Area Type first appeared on Kouei Japan Trading | Get Quotation.